summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-02-18mac80211: Clear PS related flag on disabling power save.Vivek Natarajan
Clear IEEE80211_STA_NULLFUNC_ACKED flag on disabling power save. Without this fix, there is a chance of setting CONF_PS before sending nullfunc frame. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ath9k_hw: Updates for AR9485 1.1 chipsets.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ath9k_htc: Fix a compilation warning.Vivek Natarajan
Initialize caldata to avoid compilation warning. CC [M] drivers/net/wireless/ath/ath9k/htc_drv_main.o drivers/net/wireless/ath/ath9k/htc_drv_main.c: In function ‘ath9k_htc_config’: drivers/net/wireless/ath/ath9k/htc_drv_main.c:172: warning: ‘caldata’ may be used uninitialized in this function drivers/net/wireless/ath/ath9k/htc_drv_main.c:172: note: ‘caldata’ was declared here Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18small adjustment to net/mac80211/KconfigJan Beulich
"def_bool n" without prompt is pointless, this should be just "bool". Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ssb: reset device only if it was enabledRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ssb: when needed, reject IM input while disabling deviceRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18p54: implement flush callbackChristian Lamparter
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ssb: remove invalid define SSB_TMSLOW_PHYCLKRafał Miłecki
It was incorrectly introduced in d2730b2a6a019d14455556019d744ab051e6554b. We have already fixed function to use correct define, but forgot remove old one. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ssb: trivial: fix SPROM extract warning formattingRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18mac80211: fix 2.4 GHz 40 MHz disablingJohannes Berg
The module parameter ieee80211_disable_40mhz_24ghz was meant to allow disabling 40 MHz operation in the 2.4 GHz band by default. However, it is buggy as implemented because while it advertises to the AP that the device doesn't support 40 MHz, it will itself still use 40 MHz configurations. To fix this, clear the 40 MHz bits from the sband completely instead of overriding where used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18wireless-next-2.6: brcm80211: fix compile issueHenry Ptasinski
Commit 59eb21a65047 "cfg80211: Extend channel to frequency mapping for 802.11j" changed the definition of the ieee80211_channel_to_frequency; so fix its usage in brcmfmac. Signed-off-by: Stanislav Fomichev <kernel@fomichev.me> Reviewed-by: Henry Ptasinski <henryp@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18mac80211: Add power to debugfs.Ben Greear
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18p54: Fix compile warningLarry Finger
If any of the p54-based drivers are built with CONFIG_P54_LEDS not defined, the following warning is generated: CC [M] drivers/net/wireless/p54/main.o drivers/net/wireless/p54/main.c: In function ‘p54_register_common’: drivers/net/wireless/p54/main.c:614:21: warning: unused variable ‘priv’ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ath5k: move external function definitions to a header fileBob Copeland
Johannes pointed out the mess of external function prototypes in the mac80211-ops.c file. Woe to anyone who changes these functions... Signed-off-by: Bob Copeland <me@bobcopeland.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ssb: Make ssb_wait_bit multi-bit safeMichael Büsch
ssb_wait_bit was designed for only one-bit bitmasks. People start using it for multi-bit bitmasks. Make the "set" case is safe for this. The "unset" case is already safe. This does not change behavior of the current code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6
2011-02-17Bluetooth: fix checkpatch errors in af_bluetooth.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Fix errors reported by checkpatch.plGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: fix errors reported by checkpatch.plGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Fix some code style issues in hci_event.cSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Fix some code style issues in hci_core.cSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Fix some code style issues in hci_core.hSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Clean up hci_sniff_subrate_evt functionSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>Szymon Janc
As warned by checkpatch.pl, use #include <linux/uaccess.h> instead of <asm/uaccess.h>. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Send LE Connection Update CommandClaudio Takahasi
If the new connection update parameter are accepted, the LE master host sends the LE Connection Update Command to its controller informing the new requested parameters. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Use proper timer for hci command timoutVille Tervo
Use proper timer instead of hci command flow control to timeout failed hci commands. Otherwise stack ends up sending commands when flow control is used to block new commands. 2010-09-01 18:29:41.592132 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr 00:16:CF:E1:C7:D7 mode 2 clkoffset 0x0000 2010-09-01 18:29:41.592681 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x00 ncmd 0 2010-09-01 18:29:51.022033 < HCI Command: Remote Name Request Cancel (0x01|0x001a) plen 6 bdaddr 00:16:CF:E1:C7:D7 Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Make hci a child of the corresponding tty device.Andrei Warkentin
Make /sys/class/bluetooth/hciX a symlink to path under corresponding tty. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Fix crash when ioctl(HCIUARTSETPROTO) failsGustavo F. Padovan
If the fail happens the HCI del_timer may timeout after the the hci dev unregister. This lead to a kernel crash. Reported-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add connection parameter update responseClaudio Takahasi
Implements L2CAP Connection Parameter Update Response defined in the Bluetooth Core Specification, Volume 3, Part A, section 4.21. Address the LE Connection Parameter Procedure initiated by the slave. Connection Interval Minimum and Maximum have the same range: 6 to 3200. Time = N * 1.25ms. Minimum shall be less or equal to Maximum. The Slave Latency field shall have a value in the range of 0 to ((connSupervisionTimeout / connIntervalMax) - 1). Latency field shall be less than 500. connSupervisionTimeout = Timeout Multiplier * 10 ms. Multiplier field shall have a value in the range of 10 to 3200. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add LE signaling commands handlingClaudio Takahasi
This patch splits the L2CAP command handling function in order to have a clear separation between the commands related to BR/EDR and LE. Commands and responses in the LE signaling channel are not being handled yet, command reject is sent to all received requests. Bluetooth Core Specification, Volume 3, Part A, section 4 defines the signaling packets formats and allowed commands/responses over the LE signaling channel. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Use usb_fill_int_urb()Gustavo F. Padovan
Instead set urb structure directly we call usb_fill_int_urb() to set the values to us. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add SMP command structuresVille Tervo
Add command structures for security manager protocol. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Treat LE and ACL links separately on timeoutVille Tervo
Separate LE and ACL timeouts. Othervise ACL connections on non LE hw will time out after 45 secs. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Fix initiated LE connectionsVinicius Costa Gomes
Fix LE connections not being marked as master. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Do not send disconn comand over LE linksVille Tervo
l2cap over LE links can be disconnected without sending disconnect command first. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add server socket support for LE connectionVille Tervo
Add support for LE server sockets. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add LE connection support to L2CAPVille Tervo
Add basic LE connection support to L2CAP. LE connection can be created by specifying cid in struct sockaddr_l2 Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Use LE buffers for LE trafficVille Tervo
Bluetooth chips may have separate buffers for LE traffic. This patch add support to use LE buffers provided by the chip. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add LE connect supportVille Tervo
Bluetooth V4.0 adds support for Low Energy (LE) connections. Specification introduces new set of hci commands to control LE connection. This patch adds logic to create, cancel and disconnect LE connections. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add low energy commands and eventsVille Tervo
Add needed HCI command and event structs to create LE connections. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-15Bluetooth: Add L2CAP mode to debugfs outputGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-15Bluetooth: remove l2cap_load() hackGustavo F. Padovan
l2cap_load() was added to trigger l2cap.ko module loading from the RFCOMM and BNEP modules. Now that L2CAP module is gone, we don't need it anymore. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-14mac80211: reply to directed probes in IBSSJohannes Berg
WFA certification and the WMM spec require that we always reply to unicast probe requests, so do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14p54spi: update sample eepromChristian Lamparter
Commit: "p54: enhance rssi->dBm database import" changed the way how the driver deals with the rssical data. A new data format was necessary and hence this patch. NOTE: (for users with a custom eeprom binary) I spent some time updating p54tools to support the new format too: => (git available from) http://git.kernel.org/?p=linux/kernel/git/chr/p54tools.git It now comes with a simplistic script "n800_rssi2v2.sh" which can be used to automate the conversion. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14p54: enhance rssi->dBm database importChristian Lamparter
This patch fixes several shortcomings of the previous implementation. Features of the rewrite include: * handles undocumented "0x0000" word at the start of the frequency table. (Affected some early? DELL 1450 USB devices and my Symbol 5GHz miniPCI card.) * supports more than just one reference point per band. (Also needed for the Symbol card.) * ships with default values in case the eeprom data is damaged, absent or unsupported. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14p54: p54_generate_band cleanupChristian Lamparter
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14p54: sort channel list by frequency instead of channel indexChristian Lamparter
Some channel indices of the low 5GHz band clash with those of the 2.4GHz band. Therefore we should go with the channel's center frequency. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14zd1211rw: add unlikely to ZD_ASSERTJussi Kivilinna
Case assert is violated should be quite unlikely. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14zd1211rw: move async iowrite16v up to callersJussi Kivilinna
Writing beacon to device happen through multiple write command calls. zd_usb_iowrite16v uses synchronous urb call and with multiple write commands in row causes high CPU usage. Make asynchronous zd_usb_iowrite16v_async available outside zd_usb.c and use where possible. This lower CPU usage from ~10% to ~2% on Intel Atom when running AP-mode with 100 TU beacon interval. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14zd1211rw: use async urb for write commandJussi Kivilinna
Writing beacon to device happen through multiple write command calls. zd_usb_iowrite16v uses synchronous urb call and with multiple write commands in row causes high CPU usage. This patch makes zd_usb_iowrite16v use asynchronous urb submit within zd_usb.c. zd_usb_iowrite16v_async_start is used to initiate writing multiple commands to device using zd_usb_iowrite16v_async. Each URB is delayed and submitted to device by next zd_usb_iowrite16v_async call or by call to zd_usb_iowrite16v_async_end. URBs submitted by zd_usb_iowrite16v_async have URB_NO_INTERRUPT set and last URB send by zd_usb_iowrite16v_async_end does not. This lower CPU usage when doing writes that require multiple URBs. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-25 20:36:19 +0000