summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-04-28mac80211: separate encoding/bandwidth from flagsJohannes Berg
We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: clean up rate encoding bits in RX statusJohannes Berg
In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26mac80211: make multicast variable a bool in ieee80211_accept_frame()Luca Coelho
The multicast variable in the ieee80211_accept_frame() function is treated as a boolean, but defined as int. Fix that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26mac80211: disentangle iflist_mtx and chanctx_mtxJohannes Berg
At least on iwlwifi, sometimes lockdep complains that we can lock chanctx_mtx -> mvm.mutex -> iflist_mtx (due to iterate_interfaces) and iflist_mtx -> chanctx_mtx Remove the latter dependency in mac80211 by using the RTNL that we already hold in one case, and can relatively easily achieve in the other case. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26mac80211: don't parse encrypted management frames in ieee80211_frame_ackedEmmanuel Grumbach
ieee80211_frame_acked is called when a frame is acked by the peer. In case this is a management frame, we check if this an SMPS frame, in which case we can update our antenna configuration. When we parse the management frame we look at the category in case it is an action frame. That byte sits after the IV in case the frame was encrypted. This means that if the frame was encrypted, we basically look at the IV instead of looking at the category. It is then theorically possible that we think that an SMPS action frame was acked where really we had another frame that was encrypted. Since the only management frame whose ack needs to be tracked is the SMPS action frame, and that frame is not a robust management frame, it will never be encrypted. The easiest way to fix this problem is then to not look at frames that were encrypted. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26ieee80211: fix kernel-doc parsing errorsJohannes Berg
Some of the enum definitions are unnamed but there's still an attempt at documenting them - that doesn't work. Name them to make that work. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26ieee80211: add FT-802.1X AKM suite selectorLuca Coelho
Add the definition for FT-8021.1X AKM selector as defined in IEEE Std 802.11-2016, table 9-133. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26ieee80211: add SUITE_B AKM selectorsLuca Coelho
Add the definitions for SUITE_B and SUITE_B_192 AKM selectors as defined in IEEE802.11REVmc_D5.0, table 9-132. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26cfg80211: add request id parameter to .sched_scan_stop() signatureArend Van Spriel
For multiple scheduled scan support the driver needs to know which scheduled scan request is being stopped. Pass the request id in the .sched_scan_stop() callback. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26nl80211: add support for BSSIDs in scheduled scan matchsetsArend Van Spriel
This patch allows for the scheduled scan request to specify matchsets for specific BSSIDs. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [docs, netlink policy fix] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26nl80211: allow multiple active scheduled scan requestsArend Van Spriel
This patch implements the idea to have multiple scheduled scan requests running concurrently. It mainly illustrates how to deal with the incoming request from user-space in terms of backward compatibility. In order to use multiple scheduled scans user-space needs to provide a flag attribute NL80211_ATTR_SCHED_SCAN_MULTI to indicate support. If not the request is treated as a legacy scan. Drivers currently supporting scheduled scan are now indicating they support a single scheduled scan request. This obsoletes WIPHY_FLAG_SUPPORTS_SCHED_SCAN. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [clean up netlink destroy path to avoid allocations, code cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26cfg80211: simplify netlink socket owner interface deletionJohannes Berg
There's no need to allocate a portid structure and then, for each of those, walk the interfaces - we can just add a flag to each interface and walk those directly. Due to padding in the struct, we can even do it without any memory cost, and it even simplifies the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-25mac80211: rewrite monitor mode delivery logicJohannes Berg
The monitor mode delivery logic makes it hard to add any kind of filtering in an efficient way, because the monitor SKB is created first and then passed to all interfaces. Rewrite the logic to create the monitor SKB the first time it's actually needed, and then keep delivering it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-25cfg80211: Fix dfs state propagation for non-DFS center channelVasanthakumar Thiagarajan
When part of a bigger bandwidth (160 MHz) channel falls in DFS channel range it is possible that the center frequency may not necessarily be a radar channel. Remove the sanity check on channel flag for IEEE80211_CHAN_RADAR in regulatory_propagate_dfs_state(), this should fix the dfs state propagation for non-DFS center freq which has DFS channels in it's bandwidth, should also fix unnecessary WARN_ON() spam in regulatory_propagate_dfs_state(). Fixes: 8976672736d6 ("cfg80211: Share Channel DFS state across wiphys of same DFS domain") Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-25drivers: net: xgene-v2: Fix error return code in xge_mdio_config()Wei Yongjun
Fix to return error code -ENODEV from the no PHY found error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net: Generic XDPDavid S. Miller
This provides a generic SKB based non-optimized XDP path which is used if either the driver lacks a specific XDP implementation, or the user requests it via a new IFLA_XDP_FLAGS value named XDP_FLAGS_SKB_MODE. It is arguable that perhaps I should have required something like this as part of the initial XDP feature merge. I believe this is critical for two reasons: 1) Accessibility. More people can play with XDP with less dependencies. Yes I know we have XDP support in virtio_net, but that just creates another depedency for learning how to use this facility. I wrote this to make life easier for the XDP newbies. 2) As a model for what the expected semantics are. If there is a pure generic core implementation, it serves as a semantic example for driver folks adding XDP support. One thing I have not tried to address here is the issue of XDP_PACKET_HEADROOM, thanks to Daniel for spotting that. It seems incredibly expensive to do a skb_cow(skb, XDP_PACKET_HEADROOM) or whatever even if the XDP program doesn't try to push headers at all. I think we really need the verifier to somehow propagate whether certain XDP helpers are used or not. v5: - Handle both negative and positive offset after running prog - Fix mac length in XDP_TX case (Alexei) - Use rcu_dereference_protected() in free_netdev (kbuild test robot) v4: - Fix MAC header adjustmnet before calling prog (David Ahern) - Disable LRO when generic XDP is installed (Michael Chan) - Bypass qdisc et al. on XDP_TX and record the event (Alexei) - Do not perform generic XDP on reinjected packets (DaveM) v3: - Make sure XDP program sees packet at MAC header, push back MAC header if we do XDP_TX. (Alexei) - Elide GRO when generic XDP is in use. (Alexei) - Add XDP_FLAG_SKB_MODE flag which the user can use to request generic XDP even if the driver has an XDP implementation. (Alexei) - Report whether SKB mode is in use in rtnl_xdp_fill() via XDP_FLAGS attribute. (Daniel) v2: - Add some "fall through" comments in switch statements based upon feedback from Andrew Lunn - Use RCU for generic xdp_prog, thanks to Johannes Berg. Tested-by: Andy Gospodarek <andy@greyhouse.net> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed: fix invalid use of sizeof in qed_alloc_qm_data()Wei Yongjun
sizeof() when applied to a pointer typed expression gives the size of the pointer, not that of the pointed data. Fixes: b5a9ee7cf3be ("qed: Revise QM configuration") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25bpf: map_get_next_key to return first key on NULLTeng Qin
When iterating through a map, we need to find a key that does not exist in the map so map_get_next_key will give us the first key of the map. This often requires a lot of guessing in production systems. This patch makes map_get_next_key return the first key when the key pointer in the parameter is NULL. Signed-off-by: Teng Qin <qinteng@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25selftests/net: Fix broken test case in psock_fanoutMike Maloney
The error return falue form sock_fanout_open is -1, not zero. One test case was checking for 0 instead of -1. Tested: Built and tested in clean client. Signed-off-by: Mike Maloney <maloney@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net: ethernet: ti: netcp_core: remove unused compl queue mappingIvan Khoronzhuk
This code is unused and probably was unintentionally left while moving completion queue mapping in submit function. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25Merge branch 'qed-vf-tunnel'David S. Miller
Manish Chopra says: ==================== qed/qede: VF tunnelling support With this series VFs can run vxlan/geneve/gre tunnels over it. Please consider applying this series to "net-next" ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed - VF tunnelling support [VXLAN/GENEVE/GRE]Chopra, Manish
This patch adds hardware channel APIs support between VF and PF for tunnelling configuration for the VFs. According to that configuration VFs can run VXLAN/GENEVE/GRE tunnels over it with tunnel features offloaded. Using these APIs VF can also request for UDP ports configuration to the PF, although PF and it's child VFs share the same port. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed/qede: Add UDP ports in bulletin boardChopra, Manish
This patch adds support for UDP ports in bulletin board to notify UDP ports change to the VFs Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qede: Configure UDP ports in local context.Chopra, Manish
This patch configures UDP ports locally instead of configuring them in deferred context which would be helpful in synchronizing UDP ports configuration for VFs which will be enabled in further patches. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qede: Disable tunnel offloads for non offloaded UDP portsChopra, Manish
This patch disables tunnel offloads via ndo_features_check() if given UDP port is not offloaded to hardware. This in turn allows to run multiple tunnel interfaces using different UDP ports. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed/qede: Enable tunnel offloads based on hw configurationChopra, Manish
This patch enables tunnel feature offloads based on hw configuration at initialization time instead of enabling them always. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed: refactor tunnelling - API/StructsChopra, Manish
This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25Merge branch 'l2tpeth-info'David S. Miller
Guillaume Nault says: ==================== l2tp: add informations about l2tpeth interfaces in /sys Patch #1 lets userspace retrieve the naming scheme of an l2tpeth interface, using /sys/class/net/<iface>/name_assign_type. Patch #2 adds the DEVTYPE field in /sys/class/net/<iface>/uevent so that userspace can reliably know if a device is an l2tpeth interface. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25l2tp: define "l2tpeth" device typeGuillaume Nault
Export type of l2tpeth interfaces to userspace (/sys/class/net/<iface>/uevent). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25l2tp: set name_assign_type for devices created by l2tp_eth.cGuillaume Nault
Export naming scheme used when creating l2tpeth interfaces (/sys/class/net/<iface>/name_assign_type). This let userspace know if the device's name has been generated automatically or defined manually. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net sched actions: Complete the JUMPX opcodeJamal Hadi Salim
per discussion at netconf/netdev: When we have an action that is capable of branching (example a policer), we can achieve a continuation of the action graph by programming a "continue" where we find an exact replica of the same filter rule with a lower priority and the remainder of the action graph. When you have 100s of thousands of filters which require such a feature it gets very inefficient to do two lookups. This patch completes a leftover feature of action codes. Its time has come. Example below where a user labels packets with a different skbmark on ingress of a port depending on whether they have/not exceeded the configured rate. This mark is then used to make further decisions on some egress port. #rate control, very low so we can easily see the effect sudo $TC actions add action police rate 1kbit burst 90k \ conform-exceed pipe/jump 2 index 10 # skbedit index 11 will be used if the user conforms sudo $TC actions add action skbedit mark 11 ok index 11 # skbedit index 12 will be used if the user does not conform sudo $TC actions add action skbedit mark 12 ok index 12 #lets bind the user .. sudo $TC filter add dev $ETH parent ffff: protocol ip prio 8 u32 \ match ip dst 127.0.0.8/32 flowid 1:10 \ action police index 10 \ action skbedit index 11 \ action skbedit index 12 #run a ping -f and see what happens.. # jhs@foobar:~$ sudo $TC -s filter ls dev $ETH parent ffff: protocol ip filter pref 8 u32 filter pref 8 u32 fh 800: ht divisor 1 filter pref 8 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10 (rule hit 2800 success 1005) match 7f000008/ffffffff at 16 (success 1005 ) action order 1: police 0xa rate 1Kbit burst 23440b mtu 2Kb action pipe/jump 2 overhead 0b ref 2 bind 1 installed 207 sec used 122 sec Action statistics: Sent 84420 bytes 1005 pkt (dropped 0, overlimits 721 requeues 0) backlog 0b 0p requeues 0 action order 2: skbedit mark 11 pass index 11 ref 2 bind 1 installed 204 sec used 122 sec Action statistics: Sent 60564 bytes 721 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 action order 3: skbedit mark 12 pass index 12 ref 2 bind 1 installed 201 sec used 122 sec Action statistics: Sent 23856 bytes 284 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 Not bad, about 28% non-conforming packets.. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25Merge tag 'linux-can-next-for-4.12-20170425' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2017-04-25 this is a pull request of 21 patches for net-next/master. There are 4 patches by Stephane Grosjean for the PEAK PCAN-PCIe FD CAN-FD boards. The next 7 patches are by Mario Huettel, which add support for M_CAN IP version >= v3.1.x to the m_can driver. A patch by Remigiusz Kołłątaj adds support for the Microchip CAN BUS Analyzer. 8 patches by Oliver Hartkopp complete the initial CAN network namespace support. Wei Yongjun's patch for the ti_hecc driver fixes the return value check in the probe function. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25ipvlan: use pernet operations and restrict l3s hooks to master netnsFlorian Westphal
commit 4fbae7d83c98c30efc ("ipvlan: Introduce l3s mode") added registration of netfilter hooks via nf_register_hooks(). This API provides the illusion of 'global' netfilter hooks by placing the hooks in all current and future network namespaces. In case of ipvlan the hook appears to be only needed in the namespace that contains the ipvlan master device (i.e., usually init_net), so placing them in all namespaces is not needed. This switches ipvlan driver to pernet operations, and then only registers hooks in namespaces where a ipvlan master device is set to l3s mode. Extra care has to be taken when the master device is moved to another namespace, as we might have to 'move' the netfilter hooks too. This is done by storing the namespace the ipvlan port was created in. On REGISTER event, do (un)register operations in the old/new namespaces. This will also allow removal of the nf_register_hooks() in a future patch. Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25can: ti_hecc: fix return value check in ti_hecc_probe()Wei Yongjun
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: dabf54dd1c63 ("can: ti_hecc: Convert TI HECC driver to DT only driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: enable module auto loading for virtual CAN interfacesOliver Hartkopp
Autoload the vcan module when a vcan instance is to be created by 'ip link add type vcan' Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: add Virtual CAN Tunnel driver (vxcan)Oliver Hartkopp
Similar to the virtual ethernet driver veth, vxcan implements a local CAN traffic tunnel between two virtual CAN network devices. See Kconfig entry for details. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: network namespace support for CAN gatewayOliver Hartkopp
The CAN gateway was not implemented as per-net in the initial network namespace support by Mario Kicherer (8e8cda6d737d). This patch enables the CAN gateway to be used in different namespaces. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: network namespace support for CAN_BCM protocolOliver Hartkopp
The CAN_BCM protocol and its procfs entries were not implemented as per-net in the initial network namespace support by Mario Kicherer (8e8cda6d737d). This patch adds the missing per-net functionality for the CAN BCM. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: complete initial namespace supportOliver Hartkopp
The statistics and its proc output was not implemented as per-net in the initial network namespace support by Mario Kicherer (8e8cda6d737d). This patch adds the missing per-net statistics for the CAN subsystem. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: remove obsolete definitionsOliver Hartkopp
can_rx_alldev_list is a per-net data structure now. Remove it's definition here and can_rx_dev_list too. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: remove obsolete pernet_operations definitionsOliver Hartkopp
The namespace support for the CAN subsystem does not need any additional memory. So when ".size = 0" there's no extra memory allocated by the system. And therefore ".id" is obsolete too. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: fix memory leak in initial namespace supportOliver Hartkopp
The can_rx_alldev_list is a per-net data structure now and allocated in can_pernet_init(). Make sure the memory is free'd in can_pernet_exit() too. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: mcba_usb: Add support for Microchip CAN BUS AnalyzerRemigiusz Kołłątaj
SocketCAN driver for Microchip CAN BUS Analyzer (http://www.microchip.com/development-tools/) Changes in v4: - possible memory leak fixed in mcba_usb_write_bulk_callback - LED support added - failure handling in mcba_usb_probe improved - C99 initializers for structs on stack Changes in v3: - improved/simplified CAN ID conversion - functions for transmission of skb and cmd separated - fixed/improved netif_stop_queue handling - style/cosmetic corrections Changes in v2: - Termination handling reimplemented to fit new netlink API (IFLA_CAN_TERMINATION) - Bitrate handling reimplemented to fit new netlink API (IFLA_CAN_BITRATE) - CAN ID conversion refactored (changed from macro to inline functions) - CAN DLC handling using get_can_dlc() - Endianness handling for can_speed introduced - Debugging removed - Redundant error prints removed - Style/cosmetic corrections (i.e. macro names, redefs, inits etc.) Signed-off-by: Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Enable TX FIFO Handling for M_CAN IP version >= v3.1.xMario Huettel
* Added defines for TX Event FIFO Element * Adapted ndo_start_xmit function. For versions >= v3.1.x it uses the TX FIFO to optimize the data throughput. It stores the echo skb at the same index as in the M_CAN's TX FIFO. The frame's message marker is set to this index. This message marker is received in the TX Event FIFO after the message was successfully transmitted. It is used to echo the correct echo skb back to the network stack. * Added m_can_echo_tx_event function. It reads all received message markers in the TX Event FIFO and loops back the corresponding echo skbs. * ISR checks for new TX Event Entry interrupt for version >= 3.1.x. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Configuration for TX and TX event FIFOsMario Huettel
* TX/TX Event FIFO sizes are configured for version >= v3.1.x Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Enable M_CAN version dependent initializationMario Huettel
This patch adapts the initialization of the M_CAN. So it can be used with all versions >= 3.0.x. Changes: * Added version element to m_can_priv structure to hold M_CAN version. * Renamed bittiming structs for version 3.0.x * Added new bittiming structs for version >= 3.1.x * Function alloc_m_can_dev takes 2 new arguments. The TX FIFO size and the base address of the module. * Chip configuration for CAN_CTRLMODE_LOOPBACK is changed: Enabled CCCR_MON bit. In combination with TEST_LBCK it activates the internal loopback mode. Leaving CCCR_MON '0' results in external loopback mode. * Clocks are temporarily enabled by platform_propbe function in order to allow read access to the Core Release register and the Control Register. Registers are used to detect M_CAN version and optional Non-ISO Feature. Initialization of M_CAN for version >= 3.1.x: * TX FIFO of M_CAN is used to transmit frames. The driver does not need to stop the tx queue after each frame sent. * Initialization of TX Event FIFO is added. * NON-ISO is fixed for all M_CAN versions < 3.2.x. Version 3.2.x _can_ have the NISO (Non-ISO) bit which can switch the mode of the M_CAN to Non-ISO mode. This bit does not have to be writeable. Therefore it is checked. If it is writable Non-ISO support is added to the controllers supported CAN modes. New Functions: * Function to check the Core Release version. The read value determines the behaviour of the driver. * Function to check if the NISO bit for version >= 3.2.x is implemented. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Updated register defines to newest versionMario Huettel
* Updated register defines to newest M_CAN version (v3.2.1). * Changed defines in the whole code. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Removed virtual address from printMario Huettel
The virtual address of the device was printed. I removed it because it leaks internal information. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Removed initialization of FIFO water marksMario Huettel
FIFO water marks disabled because the driver doesn't handle water mark events. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Disabled Interrupt Line 1Mario Huettel
* Disabled interrupt line 1. The driver didn't use it. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 08:10:26 +0000