summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-12mpls: fix af_mpls dependencies for realMatteo Croce
Randy reported that selecting MPLS_ROUTING without PROC_FS breaks the build, because since commit c1a9d65954c6 ("mpls: fix af_mpls dependencies"), MPLS_ROUTING selects PROC_SYSCTL, but Kconfig's select doesn't recursively handle dependencies. Change the select into a dependency. Fixes: c1a9d65954c6 ("mpls: fix af_mpls dependencies") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12selinux: fix a missing-check bug in selinux_sb_eat_lsm_opts()Gen Zhang
In selinux_sb_eat_lsm_opts(), 'arg' is allocated by kmemdup_nul(). It returns NULL when fails. So 'arg' should be checked. And 'mnt_opts' should be freed when error. Signed-off-by: Gen Zhang <blackgod016574@gmail.com> Fixes: 99dbbb593fe6 ("selinux: rewrite selinux_sb_eat_lsm_opts()") Cc: <stable@vger.kernel.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-06-12Merge branch 'mediatek-drm-fixes-5.2' of ↵Daniel Vetter
https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes CK writes: This include unbind error fix, clock control flow refinement, and PRIME mmap with page offset. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.freedesktop.org/patch/msgid/1560325868.3259.6.camel@mtksdaap41
2019-06-12Merge tag 'media/v5.2-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - a debug warning for satellite tuning at dvb core was producing too much noise - a regression at hfi_parser on Venus driver * tag 'media/v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: venus: hfi_parser: fix a regression in parser media: dvb: warning about dvb frequency limits produces too much noise
2019-06-12selinux: fix a missing-check bug in selinux_add_mnt_opt( )Gen Zhang
In selinux_add_mnt_opt(), 'val' is allocated by kmemdup_nul(). It returns NULL when fails. So 'val' should be checked. And 'mnt_opts' should be freed when error. Signed-off-by: Gen Zhang <blackgod016574@gmail.com> Fixes: 757cbe597fe8 ("LSM: new method: ->sb_add_mnt_opt()") Cc: <stable@vger.kernel.org> [PM: fixed some indenting problems] Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-06-12arm64: tlbflush: Ensure start/end of address range are aligned to strideWill Deacon
Since commit 3d65b6bbc01e ("arm64: tlbi: Set MAX_TLBI_OPS to PTRS_PER_PTE"), we resort to per-ASID invalidation when attempting to perform more than PTRS_PER_PTE invalidation instructions in a single call to __flush_tlb_range(). Whilst this is beneficial, the mmu_gather code does not ensure that the end address of the range is rounded-up to the stride when freeing intermediate page tables in pXX_free_tlb(), which defeats our range checking. Align the bounds passed into __flush_tlb_range(). Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reported-by: Hanjun Guo <guohanjun@huawei.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-06-12usb: typec: Make sure an alt mode exist before getting its partnerHeikki Krogerus
Adding check to typec_altmode_get_partner() to prevent potential NULL pointer dereference. Reported-by: Vladimir Yerilov <openmindead@gmail.com> Fixes: ad74b8649bea ("usb: typec: ucsi: Preliminary support for alternate modes") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-12xdp: check device pointer before clearingIlya Maximets
We should not call 'ndo_bpf()' or 'dev_put()' with NULL argument. Fixes: c9b47cc1fabc ("xsk: fix bug when trying to use both copy and zero-copy on one queue id") Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-12bpf: net: Set sk_bpf_storage back to NULL for cloned skMartin KaFai Lau
The cloned sk should not carry its parent-listener's sk_bpf_storage. This patch fixes it by setting it back to NULL. Fixes: 6ac99e8f23d4 ("bpf: Introduce bpf sk local storage") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-12clocksource/drivers/arm_arch_timer: Don't trace count reader functionsJulien Thierry
With v5.2-rc1, The ftrace functions_graph tracer locks up whenever it is enabled on arm64. Since commit 0ea415390cd3 ("clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters") a function pointer is consistently used to read the counter instead of potentially referencing an inlinable function. The graph tracers relies on accessing the timer counters to compute the time spent in functions which causes the lockup when attempting to trace these code paths. Annotate the arm arch timer counter accessors as notrace. Fixes: 0ea415390cd3 ("clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters") Signed-off-by: Julien Thierry <julien.thierry@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-12i2c: pca-platform: Fix GPIO lookup codeLinus Walleij
The devm_gpiod_request_gpiod() call will add "-gpios" to any passed connection ID before looking it up. I do not think the reset GPIO on this platform is named "reset-gpios-gpios" but rather "reset-gpios" in the device tree, so fix this up so that we get a proper reset GPIO handle. Also drop the inclusion of the legacy GPIO header. Fixes: 0e8ce93bdceb ("i2c: pca-platform: add devicetree awareness") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-06-12drm: add fallback override/firmware EDID modes workaroundJani Nikula
We've moved the override and firmware EDID (simply "override EDID" from now on) handling to the low level drm_do_get_edid() function in order to transparently use the override throughout the stack. The idea is that you get the override EDID via the ->get_modes() hook. Unfortunately, there are scenarios where the DDC probe in drm_get_edid() called via ->get_modes() fails, although the preceding ->detect() succeeds. In the case reported by Paul Wise, the ->detect() hook, intel_crt_detect(), relies on hotplug detect, bypassing the DDC. In the case reported by Ilpo Järvinen, there is no ->detect() hook, which is interpreted as connected. The subsequent DDC probe reached via ->get_modes() fails, and we don't even look at the override EDID, resulting in no modes being added. Because drm_get_edid() is used via ->detect() all over the place, we can't trivially remove the DDC probe, as it leads to override EDID effectively meaning connector forcing. The goal is that connector forcing and override EDID remain orthogonal. Generally, the underlying problem here is the conflation of ->detect() and ->get_modes() via drm_get_edid(). The former should just detect, and the latter should just get the modes, typically via reading the EDID. As long as drm_get_edid() is used in ->detect(), it needs to retain the DDC probe. Or such users need to have a separate DDC probe step first. The EDID caching between ->detect() and ->get_modes() done by some drivers is a further complication that prevents us from making drm_do_get_edid() adapt to the two cases. Work around the regression by falling back to a separate attempt at getting the override EDID at drm_helper_probe_single_connector_modes() level. With a working DDC and override EDID, it'll never be called; the override EDID will come via ->get_modes(). There will still be a failing DDC probe attempt in the cases that require the fallback. v2: - Call drm_connector_update_edid_property (Paul) - Update commit message about EDID caching (Daniel) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107583 Reported-by: Paul Wise <pabs3@bonedaddy.net> Cc: Paul Wise <pabs3@bonedaddy.net> References: http://mid.mail-archive.com/alpine.DEB.2.20.1905262211270.24390@whs-18.cs.helsinki.fi Reported-by: Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi> Cc: Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> References: 15f080f08d48 ("drm/edid: respect connector force for drm_get_edid ddc probe") Fixes: 53fd40a90f3c ("drm: handle override and firmware EDID at drm_do_get_edid() level") Cc: <stable@vger.kernel.org> # v4.15+ 56a2b7f2a39a drm/edid: abstract override/firmware EDID retrieval Cc: <stable@vger.kernel.org> # v4.15+ Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harish Chegondi <harish.chegondi@intel.com> Tested-by: Paul Wise <pabs3@bonedaddy.net> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190610093054.28445-1-jani.nikula@intel.com
2019-06-12i2c: acorn: fix i2c warningRussell King
The Acorn i2c driver (for RiscPC) triggers the "i2c adapter has no name" warning in the I2C core driver, resulting in the RTC being inaccessible. Fix this. Fixes: 2236baa75f70 ("i2c: Sanity checks on adapter registration") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2019-06-12arm64: Don't unconditionally add -Wno-psabi to KBUILD_CFLAGSNathan Chancellor
This is a GCC only option, which warns about ABI changes within GCC, so unconditionally adding it breaks Clang with tons of: warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option] and link time failures: ld.lld: error: undefined symbol: __efistub___stack_chk_guard >>> referenced by arm-stub.c:73 (/home/nathan/cbl/linux/drivers/firmware/efi/libstub/arm-stub.c:73) >>> arm-stub.stub.o:(__efistub_install_memreserve_table) in archive ./drivers/firmware/efi/libstub/lib.a These failures come from the lack of -fno-stack-protector, which is added via cc-option in drivers/firmware/efi/libstub/Makefile. When an unknown flag is added to KBUILD_CFLAGS, clang will noisily warn that it is ignoring the option like above, unlike gcc, who will just error. $ echo "int main() { return 0; }" > tmp.c $ clang -Wno-psabi tmp.c; echo $? warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option] 1 warning generated. 0 $ gcc -Wsometimes-uninitialized tmp.c; echo $? gcc: error: unrecognized command line option ‘-Wsometimes-uninitialized’; did you mean ‘-Wmaybe-uninitialized’? 1 For cc-option to work properly with clang and behave like gcc, -Werror is needed, which was done in commit c3f0d0bc5b01 ("kbuild, LLVMLinux: Add -Werror to cc-option to support clang"). $ clang -Werror -Wno-psabi tmp.c; echo $? error: unknown warning option '-Wno-psabi' [-Werror,-Wunknown-warning-option] 1 As a consequence of this, when an unknown flag is unconditionally added to KBUILD_CFLAGS, it will cause cc-option to always fail and those flags will never get added: $ clang -Werror -Wno-psabi -fno-stack-protector tmp.c; echo $? error: unknown warning option '-Wno-psabi' [-Werror,-Wunknown-warning-option] 1 This can be seen when compiling the whole kernel as some warnings that are normally disabled (see below) show up. The full list of flags missing from drivers/firmware/efi/libstub are the following (gathered from diffing .arm64-stub.o.cmd): -fno-delete-null-pointer-checks -Wno-address-of-packed-member -Wframe-larger-than=2048 -Wno-unused-const-variable -fno-strict-overflow -fno-merge-all-constants -fno-stack-check -Werror=date-time -Werror=incompatible-pointer-types -ffreestanding -fno-stack-protector Use cc-disable-warning so that it gets disabled for GCC and does nothing for Clang. Fixes: ebcc5928c5d9 ("arm64: Silence gcc warnings about arch ABI drift") Link: https://github.com/ClangBuiltLinux/linux/issues/511 Reported-by: Qian Cai <cai@lca.pw> Acked-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-06-12drm/edid: abstract override/firmware EDID retrievalJani Nikula
Abstract the debugfs override and the firmware EDID retrieval function. We'll be needing it in the follow-up. No functional changes. Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Harish Chegondi <harish.chegondi@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Tested-by: Paul Wise <pabs3@bonedaddy.net> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190607110513.12072-1-jani.nikula@intel.com
2019-06-12platform/mellanox: mlxreg-hotplug: Add devm_free_irq call to remove flowVadim Pasternak
Add devm_free_irq() call to mlxreg-hotplug remove() for clean release of devices irq resource. Fix debugobjects warning triggered by rmmod It prevents of use-after-free memory, related to mlxreg_hotplug_work_handler. Issue has been reported as debugobjects warning triggered by 'rmmod mlxtreg-hotplug' flow, while running kernel with CONFIG_DEBUG_OBJECTS* options. [ 2489.623551] ODEBUG: free active (active state 0) object type: work_struct hint: mlxreg_hotplug_work_handler+0x0/0x7f0 [mlxreg_hotplug] [ 2489.637097] WARNING: CPU: 5 PID: 3924 at lib/debugobjects.c:328 debug_print_object+0xfe/0x180 [ 2489.637165] RIP: 0010:debug_print_object+0xfe/0x180 ? [ 2489.637214] Call Trace: [ 2489.637225] __debug_check_no_obj_freed+0x25e/0x320 [ 2489.637231] kfree+0x82/0x110 [ 2489.637238] release_nodes+0x33c/0x4e0 [ 2489.637242] ? devres_remove_group+0x1b0/0x1b0 [ 2489.637247] device_release_driver_internal+0x146/0x270 [ 2489.637251] driver_detach+0x73/0xe0 [ 2489.637254] bus_remove_driver+0xa1/0x170 [ 2489.637261] __x64_sys_delete_module+0x29e/0x320 [ 2489.637265] ? __ia32_sys_delete_module+0x320/0x320 [ 2489.637268] ? blkcg_exit_queue+0x20/0x20 [ 2489.637273] ? task_work_run+0x7d/0x100 [ 2489.637278] ? exit_to_usermode_loop+0x5b/0xf0 [ 2489.637281] do_syscall_64+0x73/0x160 [ 2489.637287] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 2489.637290] RIP: 0033:0x7f95c3596fd7 The difference in release flow with and with no devm_free_irq is listed below: bus: 'platform': remove driver mlxreg-hotplug mlxreg_hotplug_remove(start) -> devm_free_irq (with new code) mlxreg_hotplug_remove (end) release_nodes (start) mlxreg-hotplug: DEVRES REL devm_hwmon_release (8 bytes) device: 'hwmon3': device_unregister PM: Removing info for No Bus:hwmon3 mlxreg-hotplug: DEVRES REL devm_kzalloc_release (88 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (6 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_irq_release (16 bytes) (no new code) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (1376 bytes) ------------[ cut here ]------------ (no new code): ODEBUG: free active (active state 0) object type: work_struct hint: mlxreg_hotplug_work_handler release_nodes(end) driver: 'mlxreg-hotplug': driver_release Fixes: 1f976f6978bf ("platform/x86: Move Mellanox platform hotplug driver to platform/mellanox") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-06-12platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registrationVadim Pasternak
Fix the issue found while running kernel with the option CONFIG_DEBUG_TEST_DRIVER_REMOVE. Driver 'mlx-platform' registers 'i2c_mlxcpld' device and then registers few underlying 'i2c-mux-reg' devices: priv->pdev_i2c = platform_device_register_simple("i2c_mlxcpld", nr, NULL, 0); ... for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) { priv->pdev_mux[i] = platform_device_register_resndata( &mlxplat_dev->dev, "i2c-mux-reg", i, NULL, 0, &mlxplat_mux_data[i], sizeof(mlxplat_mux_data[i])); But actual parent of "i2c-mux-reg" device is priv->pdev_i2c->dev and not mlxplat_dev->dev. Patch fixes parent device parameter in a call to platform_device_register_resndata() for "i2c-mux-reg". It solves the race during initialization flow while 'i2c_mlxcpld.1' is removing after probe, while 'i2c-mux-reg.0' is still in probing flow: 'i2c_mlxcpld.1' flow: probe -> remove -> probe. 'i2c-mux-reg.0' flow: probe -> ... [ 12:621096] Registering platform device 'i2c_mlxcpld.1'. Parent at platform [ 12:621117] device: 'i2c_mlxcpld.1': device_add [ 12:621155] bus: 'platform': add device i2c_mlxcpld.1 [ 12:621384] Registering platform device 'i2c-mux-reg.0'. Parent at mlxplat [ 12:621395] device: 'i2c-mux-reg.0': device_add [ 12:621425] bus: 'platform': add device i2c-mux-reg.0 [ 12:621806] Registering platform device 'i2c-mux-reg.1'. Parent at mlxplat [ 12:621828] device: 'i2c-mux-reg.1': device_add [ 12:621892] bus: 'platform': add device i2c-mux-reg.1 [ 12:621906] bus: 'platform': add driver i2c_mlxcpld [ 12:621996] bus: 'platform': driver_probe_device: matched device i2c_mlxcpld.1 with driver i2c_mlxcpld [ 12:622003] bus: 'platform': really_probe: probing driver i2c_mlxcpld with device i2c_mlxcpld.1 [ 12:622100] i2c_mlxcpld i2c_mlxcpld.1: no default pinctrl state [ 12:622293] device: 'i2c-1': device_add [ 12:627280] bus: 'i2c': add device i2c-1 [ 12:627692] device: 'i2c-1': device_add [ 12.629639] bus: 'platform': add driver i2c-mux-reg [ 12.629718] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg [ 12.629723] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0 [ 12.629818] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state [ 12.629981] platform i2c-mux-reg.0: Driver i2c-mux-reg requests probe deferral [ 12.629986] platform i2c-mux-reg.0: Added to deferred list [ 12.629992] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.1 with driver i2c-mux-reg [ 12.629997] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.1 [ 12.630091] i2c-mux-reg i2c-mux-reg.1: no default pinctrl state [ 12.630247] platform i2c-mux-reg.1: Driver i2c-mux-reg requests probe deferral [ 12.630252] platform i2c-mux-reg.1: Added to deferred list [ 12.640892] devices_kset: Moving i2c-mux-reg.0 to end of list [ 12.640900] platform i2c-mux-reg.0: Retrying from deferred list [ 12.640911] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg [ 12.640919] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0 [ 12.640999] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state [ 12.641177] platform i2c-mux-reg.0: Driver i2c-mux-reg requests probe deferral [ 12.641187] platform i2c-mux-reg.0: Added to deferred list [ 12.641198] devices_kset: Moving i2c-mux-reg.1 to end of list [ 12.641219] platform i2c-mux-reg.1: Retrying from deferred list [ 12.641237] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.1 with driver i2c-mux-reg [ 12.641247] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.1 [ 12.641331] i2c-mux-reg i2c-mux-reg.1: no default pinctrl state [ 12.641465] platform i2c-mux-reg.1: Driver i2c-mux-reg requests probe deferral [ 12.641469] platform i2c-mux-reg.1: Added to deferred list [ 12.646427] device: 'i2c-1': device_add [ 12.646647] bus: 'i2c': add device i2c-1 [ 12.647104] device: 'i2c-1': device_add [ 12.669231] devices_kset: Moving i2c-mux-reg.0 to end of list [ 12.669240] platform i2c-mux-reg.0: Retrying from deferred list [ 12.669258] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg [ 12.669263] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0 [ 12.669343] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state [ 12.669585] device: 'i2c-2': device_add [ 12.669795] bus: 'i2c': add device i2c-2 [ 12.670201] device: 'i2c-2': device_add [ 12.671427] i2c i2c-1: Added multiplexed i2c bus 2 [ 12.671514] device: 'i2c-3': device_add [ 12.671724] bus: 'i2c': add device i2c-3 [ 12.672136] device: 'i2c-3': device_add [ 12.673378] i2c i2c-1: Added multiplexed i2c bus 3 [ 12.673472] device: 'i2c-4': device_add [ 12.673676] bus: 'i2c': add device i2c-4 [ 12.674060] device: 'i2c-4': device_add [ 12.675861] i2c i2c-1: Added multiplexed i2c bus 4 [ 12.675941] device: 'i2c-5': device_add [ 12.676150] bus: 'i2c': add device i2c-5 [ 12.676550] device: 'i2c-5': device_add [ 12.678103] i2c i2c-1: Added multiplexed i2c bus 5 [ 12.678193] device: 'i2c-6': device_add [ 12.678395] bus: 'i2c': add device i2c-6 [ 12.678774] device: 'i2c-6': device_add [ 12.679969] i2c i2c-1: Added multiplexed i2c bus 6 [ 12.680065] device: 'i2c-7': device_add [ 12.680275] bus: 'i2c': add device i2c-7 [ 12.680913] device: 'i2c-7': device_add [ 12.682506] i2c i2c-1: Added multiplexed i2c bus 7 [ 12.682600] device: 'i2c-8': device_add [ 12.682808] bus: 'i2c': add device i2c-8 [ 12.683189] device: 'i2c-8': device_add [ 12.683907] device: 'i2c-1': device_unregister [ 12.683945] device: 'i2c-1': device_unregister [ 12.684387] device: 'i2c-1': device_create_release [ 12.684536] bus: 'i2c': remove device i2c-1 [ 12.686019] i2c i2c-8: Failed to create compatibility class link [ 12.686086] ------------[ cut here ]------------ [ 12.686087] can't create symlink to mux device [ 12.686224] Workqueue: events deferred_probe_work_func [ 12.686135] WARNING: CPU: 7 PID: 436 at drivers/i2c/i2c-mux.c:416 i2c_mux_add_adapter+0x729/0x7d0 [i2c_mux] [ 12.686232] RIP: 0010:i2c_mux_add_adapter+0x729/0x7d0 [i2c_mux] [ 0x190/0x190 [i2c_mux] [ 12.686300] ? i2c_mux_alloc+0xac/0x110 [i2c_mux] [ 12.686306] ? i2c_mux_reg_set+0x200/0x200 [i2c_mux_reg] [ 12.686313] i2c_mux_reg_probe+0x22c/0x731 [i2c_mux_reg] [ 12.686322] ? i2c_mux_reg_deselect+0x60/0x60 [i2c_mux_reg] [ 12.686346] platform_drv_probe+0xa8/0x110 [ 12.686351] really_probe+0x185/0x720 [ 12.686358] driver_probe_device+0xdf/0x1f0 ... [ 12.686522] i2c i2c-1: Added multiplexed i2c bus 8 [ 12.686621] device: 'i2c-9': device_add [ 12.686626] kobject_add_internal failed for i2c-9 (error: -2 parent: i2c-1) [ 12.694729] i2c-core: adapter 'i2c-1-mux (chan_id 8)': can't register device (-2) [ 12.705726] i2c i2c-1: failed to add mux-adapter 8 as bus 9 (error=-2) [ 12.714494] device: 'i2c-8': device_unregister [ 12.714537] device: 'i2c-8': device_unregister Fixes: 6613d18e9038 ("platform/x86: mlx-platform: Move module from arch/x86") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-06-12platform/x86: intel-vbtn: Report switch events when event wakes deviceMathew King
When a switch event, such as tablet mode/laptop mode or docked/undocked, wakes a device make sure that the value of the swich is reported. Without when a device is put in tablet mode from laptop mode when it is suspended or vice versa the device will wake up but mode will be incorrect. Tested by suspending a device in laptop mode and putting it in tablet mode, the device resumes and is in tablet mode. When suspending the device in tablet mode and putting it in laptop mode the device resumes and is in laptop mode. Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-06-12platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from ↵Hans de Goede
asus_nb_wmi Commit 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey") causes the backlight to be permanently off on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC 1015BX, Asus EeePC 1025C). The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added by that commit is made conditional in this commit and only enabled in the quirk_entry structs in the asus-nb-wmi driver fixing the broken display / backlight on various EeePC laptop models. Cc: João Paulo Rechi Vita <jprvita@endlessm.com> Fixes: 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-06-12x86/resctrl: Prevent NULL pointer dereference when local MBM is disabledPrarit Bhargava
Booting with kernel parameter "rdt=cmt,mbmtotal,memlocal,l3cat,mba" and executing "mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl" results in a NULL pointer dereference on systems which do not have local MBM support enabled.. BUG: kernel NULL pointer dereference, address: 0000000000000020 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 722 Comm: kworker/0:3 Not tainted 5.2.0-0.rc3.git0.1.el7_UNSUPPORTED.x86_64 #2 Workqueue: events mbm_handle_overflow RIP: 0010:mbm_handle_overflow+0x150/0x2b0 Only enter the bandwith update loop if the system has local MBM enabled. Fixes: de73f38f7680 ("x86/intel_rdt/mba_sc: Feedback loop to dynamically update mem bandwidth") Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190610171544.13474-1-prarit@redhat.com
2019-06-12x86/resctrl: Don't stop walking closids when a locksetup group is foundJames Morse
When a new control group is created __init_one_rdt_domain() walks all the other closids to calculate the sets of used and unused bits. If it discovers a pseudo_locksetup group, it breaks out of the loop. This means any later closid doesn't get its used bits added to used_b. These bits will then get set in unused_b, and added to the new control group's configuration, even if they were marked as exclusive for a later closid. When encountering a pseudo_locksetup group, we should continue. This is because "a resource group enters 'pseudo-locked' mode after the schemata is written while the resource group is in 'pseudo-locksetup' mode." When we find a pseudo_locksetup group, its configuration is expected to be overwritten, we can skip it. Fixes: dfe9674b04ff6 ("x86/intel_rdt: Enable entering of pseudo-locksetup mode") Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H Peter Avin <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20190603172531.178830-1-james.morse@arm.com
2019-06-12iommu/arm-smmu: Avoid constant zero in TLBI writesRobin Murphy
Apparently, some Qualcomm arm64 platforms which appear to expose their SMMU global register space are still, in fact, using a hypervisor to mediate it by trapping and emulating register accesses. Sadly, some deployed versions of said trapping code have bugs wherein they go horribly wrong for stores using r31 (i.e. XZR/WZR) as the source register. While this can be mitigated for GCC today by tweaking the constraints for the implementation of writel_relaxed(), to avoid any potential arms race with future compilers more aggressively optimising register allocation, the simple way is to just remove all the problematic constant zeros. For the write-only TLB operations, the actual value is irrelevant anyway and any old nearby variable will provide a suitable GPR to encode. The one point at which we really do need a zero to clear a context bank happens before any of the TLB maintenance where crashes have been reported, so is apparently not a problem... :/ Reported-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Acked-by: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12drm/i915/perf: fix whitelist on Gen10+Lionel Landwerlin
Gen10 added an additional NOA_WRITE register (high bits) and we forgot to whitelist it for userspace. Fixes: 95690a02fb5d96 ("drm/i915/perf: enable perf support on CNL") Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190601225845.12600-1-lionel.g.landwerlin@intel.com (cherry picked from commit bf210f6c9e6fd8dc0d154ad18f741f20e64a3fce) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-06-12drm/i915/sdvo: Implement proper HDMI audio support for SDVOVille Syrjälä
Our SDVO audio support is pretty bogus. We can't push audio over the SDVO bus, so trying to enable audio in the SDVO control register doesn't do anything. In fact it looks like the SDVO encoder will always mix in the audio coming over HDA, and there's no (at least documented) way to disable that from our side. So HDMI audio does work currently on gen4 but only by luck really. On gen3 it got broken by the referenced commit. And what has always been missing on every platform is the ELD. To pass the ELD to the audio driver we need to write it to magic buffer in the SDVO encoder hardware which then gets pulled out via HDA in the other end. Ie. pretty much the same thing we had for native HDMI before we started to just pass the ELD between the drivers. This sort of explains why we even have that silly hardware buffer with native HDMI. $ cat /proc/asound/card0/eld#1.0 -monitor_present 0 -eld_valid 0 +monitor_present 1 +eld_valid 1 +monitor_name LG TV +connection_type HDMI +... This also fixes our state readout since we can now query the SDVO encoder about the state of the "ELD valid" and "presence detect" bits. As mentioned those don't actually control whether audio gets sent over the HDMI cable, but it's the best we can do. And with the state checker appeased we can re-enable HDMI audio for gen3. Cc: stable@vger.kernel.org Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: zardam@gmail.com Tested-by: zardam@gmail.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108976 Fixes: de44e256b92c ("drm/i915/sdvo: Shut up state checker with hdmi cards on gen3") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-3-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit dc49a56bd43bb04982e64b44436831da801d0237) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-06-12drm/i915: Fix per-pixel alpha with CCSVille Syrjälä
We forgot to set .has_alpha=true for the A+CCS formats when the code started to consult .has_alpha. This manifests as A+CCS being treated as X+CCS which means no per-pixel alpha blending. Fix the format list appropriately. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Heinrich Fink <heinrich.fink@daqri.com> Reported-by: Heinrich Fink <heinrich.fink@daqri.com> Tested-by: Heinrich Fink <heinrich.fink@daqri.com> Fixes: b20815255693 ("drm/i915: Add plane alpha blending support, v2.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190603142500.25680-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit 38f300410f3e15b6fec76c8d8baed7111b5ea4e4) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-06-12drm/i915/dmc: protect against reading random memoryLucas De Marchi
While loading the DMC firmware we were double checking the headers made sense, but in no place we checked that we were actually reading memory we were supposed to. This could be wrong in case the firmware file is truncated or malformed. Before this patch: # ls -l /lib/firmware/i915/icl_dmc_ver1_07.bin -rw-r--r-- 1 root root 25716 Feb 1 12:26 icl_dmc_ver1_07.bin # truncate -s 25700 /lib/firmware/i915/icl_dmc_ver1_07.bin # modprobe i915 # dmesg| grep -i dmc [drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin [drm] Finished loading DMC firmware i915/icl_dmc_ver1_07.bin (v1.7) i.e. it loads random data. Now it fails like below: [drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin [drm:csr_load_work_fn [i915]] *ERROR* Truncated DMC firmware, rejecting. i915 0000:00:02.0: Failed to load DMC firmware i915/icl_dmc_ver1_07.bin. Disabling runtime power management. i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 Before reading any part of the firmware file, validate the input first. Fixes: eb805623d8b1 ("drm/i915/skl: Add support to load SKL CSR firmware.") Cc: stable@vger.kernel.org Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190605235535.17791-1-lucas.demarchi@intel.com (cherry picked from commit bc7b488b1d1c71dc4c5182206911127bc6c410d6) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-06-12drm/i915/dsi: Use a fuzzy check for burst mode clock checkHans de Goede
Prior to this commit we fail to init the DSI panel on the GPD MicroPC: https://www.indiegogo.com/projects/gpd-micropc-6-inch-handheld-industry-laptop#/ The problem is intel_dsi_vbt_init() failing with the following error: *ERROR* Burst mode freq is less than computed The pclk in the VBT panel modeline is 70000, together with 24 bpp and 4 lines this results in a bitrate value of 70000 * 24 / 4 = 420000. But the target_burst_mode_freq in the VBT is 418000. This commit works around this problem by adding an intel_fuzzy_clock_check when target_burst_mode_freq < bitrate and setting target_burst_mode_freq to bitrate when that checks succeeds, fixing the panel not working. Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190524174028.21659-2-hdegoede@redhat.com (cherry picked from commit 2c1c55252647abd989b94f725b190c700312d053) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-06-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ptrace fixes from Eric Biederman: "This is just two very minor fixes: - prevent ptrace from reading unitialized kernel memory found twice by syzkaller - restore a missing smp_rmb in ptrace_may_access and add comment tp it so it is not removed by accident again. Apologies for being a little slow about getting this to you, I am still figuring out how to develop with a little baby in the house" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ptrace: restore smp_rmb() in __ptrace_may_access() signal/ptrace: Don't leak unitialized kernel memory with PTRACE_PEEK_SIGINFO
2019-06-11Merge branch 'stable/for-linus-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fix from Konrad Rzeszutek Wilk: "One tiny fix for ARM64 where we could allocate the SWIOTLB twice" * 'stable/for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: xen/swiotlb: don't initialize swiotlb twice on arm64
2019-06-11Merge tag 'vfio-v5.2-rc5' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fixes from Alex Williamson: "Fix mdev device create/remove paths to provide initialized device for parent driver create callback and correct ordering of device removal from bus prior to initiating removal by parent. Also resolve races between parent removal and device create/remove paths (all from Parav Pandit)" * tag 'vfio-v5.2-rc5' of git://github.com/awilliam/linux-vfio: vfio/mdev: Synchronize device create/remove with parent removal vfio/mdev: Avoid creating sysfs remove file on stale device removal vfio/mdev: Improve the create/remove sequence
2019-06-11Merge tag 'for-5.2-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: "One regression fix to TRIM ioctl. The range cannot be used as its meaning can be confusing regarding physical and logical addresses. This confusion in code led to potential corruptions when the range overlapped data. The original patch made it to several stable kernels and was promptly reverted, the version for master branch is different due to additional changes but the change is effectively the same" * tag 'for-5.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: Always trim all unallocated space in btrfs_trim_free_extents
2019-06-11selinux: log raw contexts as untrusted stringsOndrej Mosnacek
These strings may come from untrusted sources (e.g. file xattrs) so they need to be properly escaped. Reproducer: # setenforce 0 # touch /tmp/test # setfattr -n security.selinux -v 'kuřecí řízek' /tmp/test # runcon system_u:system_r:sshd_t:s0 cat /tmp/test (look at the generated AVCs) Actual result: type=AVC [...] trawcon=kuřecí řízek Expected result: type=AVC [...] trawcon=6B75C5996563C3AD20C599C3AD7A656B Fixes: fede148324c3 ("selinux: log invalid contexts in AVCs") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Acked-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-06-11ptrace: restore smp_rmb() in __ptrace_may_access()Jann Horn
Restore the read memory barrier in __ptrace_may_access() that was deleted a couple years ago. Also add comments on this barrier and the one it pairs with to explain why they're there (as far as I understand). Fixes: bfedb589252c ("mm: Add a user_ns owner to mm_struct and fix ptrace permission checks") Cc: stable@vger.kernel.org Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2019-06-11Merge branch 'vxlan-geneve-linear'David S. Miller
Stefano Brivio says: ==================== Don't assume linear buffers in error handlers for VXLAN and GENEVE Guillaume noticed the same issue fixed by commit 26fc181e6cac ("fou, fou6: do not assume linear skbs") for fou and fou6 is also present in VXLAN and GENEVE error handlers: we can't assume linear buffers there, we need to use pskb_may_pull() instead. ==================== Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11geneve: Don't assume linear buffers in error handlerStefano Brivio
In commit a07966447f39 ("geneve: ICMP error lookup handler") I wrongly assumed buffers from icmp_socket_deliver() would be linear. This is not the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear data. Eric fixed this same issue for fou and fou6 in commits 26fc181e6cac ("fou, fou6: do not assume linear skbs") and 5355ed6388e2 ("fou, fou6: avoid uninit-value in gue_err() and gue6_err()"). Use pskb_may_pull() instead of checking skb->len, and take into account the fact we later access the GENEVE header with udp_hdr(), so we also need to sum skb_transport_header() here. Reported-by: Guillaume Nault <gnault@redhat.com> Fixes: a07966447f39 ("geneve: ICMP error lookup handler") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11vxlan: Don't assume linear buffers in error handlerStefano Brivio
In commit c3a43b9fec8a ("vxlan: ICMP error lookup handler") I wrongly assumed buffers from icmp_socket_deliver() would be linear. This is not the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear data. Eric fixed this same issue for fou and fou6 in commits 26fc181e6cac ("fou, fou6: do not assume linear skbs") and 5355ed6388e2 ("fou, fou6: avoid uninit-value in gue_err() and gue6_err()"). Use pskb_may_pull() instead of checking skb->len, and take into account the fact we later access the VXLAN header with udp_hdr(), so we also need to sum skb_transport_header() here. Reported-by: Guillaume Nault <gnault@redhat.com> Fixes: c3a43b9fec8a ("vxlan: ICMP error lookup handler") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11net: openvswitch: do not free vport if register_netdevice() is failed.Taehee Yoo
In order to create an internal vport, internal_dev_create() is used and that calls register_netdevice() internally. If register_netdevice() fails, it calls dev->priv_destructor() to free private data of netdev. actually, a private data of this is a vport. Hence internal_dev_create() should not free and use a vport after failure of register_netdevice(). Test command ovs-dpctl add-dp bonding_masters Splat looks like: [ 1035.667767] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 1035.675958] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 1035.676916] CPU: 1 PID: 1028 Comm: ovs-vswitchd Tainted: G B 5.2.0-rc3+ #240 [ 1035.676916] RIP: 0010:internal_dev_create+0x2e5/0x4e0 [openvswitch] [ 1035.676916] Code: 48 c1 ea 03 80 3c 02 00 0f 85 9f 01 00 00 4c 8b 23 48 b8 00 00 00 00 00 fc ff df 49 8d bc 24 60 05 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 86 01 00 00 49 8b bc 24 60 05 00 00 e8 e4 68 f4 [ 1035.713720] RSP: 0018:ffff88810dcb7578 EFLAGS: 00010206 [ 1035.713720] RAX: dffffc0000000000 RBX: ffff88810d13fe08 RCX: ffffffff84297704 [ 1035.713720] RDX: 00000000000000ac RSI: 0000000000000000 RDI: 0000000000000560 [ 1035.713720] RBP: 00000000ffffffef R08: fffffbfff0d3b881 R09: fffffbfff0d3b881 [ 1035.713720] R10: 0000000000000001 R11: fffffbfff0d3b880 R12: 0000000000000000 [ 1035.768776] R13: 0000607ee460b900 R14: ffff88810dcb7690 R15: ffff88810dcb7698 [ 1035.777709] FS: 00007f02095fc980(0000) GS:ffff88811b400000(0000) knlGS:0000000000000000 [ 1035.777709] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1035.777709] CR2: 00007ffdf01d2f28 CR3: 0000000108258000 CR4: 00000000001006e0 [ 1035.777709] Call Trace: [ 1035.777709] ovs_vport_add+0x267/0x4f0 [openvswitch] [ 1035.777709] new_vport+0x15/0x1e0 [openvswitch] [ 1035.777709] ovs_vport_cmd_new+0x567/0xd10 [openvswitch] [ 1035.777709] ? ovs_dp_cmd_dump+0x490/0x490 [openvswitch] [ 1035.777709] ? __kmalloc+0x131/0x2e0 [ 1035.777709] ? genl_family_rcv_msg+0xa54/0x1030 [ 1035.777709] genl_family_rcv_msg+0x63a/0x1030 [ 1035.777709] ? genl_unregister_family+0x630/0x630 [ 1035.841681] ? debug_show_all_locks+0x2d0/0x2d0 [ ... ] Fixes: cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11net: correct udp zerocopy refcnt also when zerocopy only on appendWillem de Bruijn
The below patch fixes an incorrect zerocopy refcnt increment when appending with MSG_MORE to an existing zerocopy udp skb. send(.., MSG_ZEROCOPY | MSG_MORE); // refcnt 1 send(.., MSG_ZEROCOPY | MSG_MORE); // refcnt still 1 (bar frags) But it missed that zerocopy need not be passed at the first send. The right test whether the uarg is newly allocated and thus has extra refcnt 1 is not !skb, but !skb_zcopy. send(.., MSG_MORE); // <no uarg> send(.., MSG_ZEROCOPY); // refcnt 1 Fixes: 100f6d8e09905 ("net: correct zerocopy refcnt with udp MSG_MORE") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11drm/amdgpu/{uvd,vcn}: fetch ring's read_ptr after allocShirish S
[What] readptr read always returns zero, since most likely these blocks are either power or clock gated. [How] fetch rptr after amdgpu_ring_alloc() which informs the power management code that the block is about to be used and hence the gating is turned off. Signed-off-by: Louis Li <Ching-shih.Li@amd.com> Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-06-11riscv: Fix udelay in RV32.Nick Hu
In RV32, udelay would delay the wrong cycle. When it shifts right "UDELAY_SHIFT" bits, it either delays 0 cycle or 1 cycle. It only works correctly in RV64. Because the 'ucycles' always needs to be 64 bits variable. Signed-off-by: Nick Hu <nickhu@andestech.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> [paul.walmsley@sifive.com: fixed minor spelling error] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-11riscv: export pm_power_off againAndreas Schwab
Commit bf0102a0fdd9 ("riscv: call pm_power_off from machine_halt / machine_power_off") removed the export of pm_power_off, but it is used by several modules: ERROR: "pm_power_off" [drivers/mfd/rk808.ko] undefined! ERROR: "pm_power_off" [drivers/mfd/max8907.ko] undefined! ERROR: "pm_power_off" [drivers/mfd/axp20x.ko] undefined! ERROR: "pm_power_off" [drivers/char/ipmi/ipmi_poweroff.ko] undefined! Signed-off-by: Andreas Schwab <schwab@suse.de> Fixes: bf0102a0fdd9 ("riscv: call pm_power_off from machine_halt / machine_power_off") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-11RISC-V: defconfig: enable clocks, serial consoleKevin Hilman
Enable PRCI clock driver and serial console by default, so the default upstream defconfig is bootable to a serial console. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-11bpf: lpm_trie: check left child of last leftmost node for NULLJonathan Lemon
If the leftmost parent node of the tree has does not have a child on the left side, then trie_get_next_key (and bpftool map dump) will not look at the child on the right. This leads to the traversal missing elements. Lookup is not affected. Update selftest to handle this case. Reproducer: bpftool map create /sys/fs/bpf/lpm type lpm_trie key 6 \ value 1 entries 256 name test_lpm flags 1 bpftool map update pinned /sys/fs/bpf/lpm key 8 0 0 0 0 0 value 1 bpftool map update pinned /sys/fs/bpf/lpm key 16 0 0 0 0 128 value 2 bpftool map dump pinned /sys/fs/bpf/lpm Returns only 1 element. (2 expected) Fixes: b471f2f1de8b ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE") Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-11ALSA: ice1712: Check correct return value to snd_i2c_sendbytes (EWS/DMX 6Fire)Rui Nuno Capela
Check for exact and correct return value to snd_i2c_sendbytes call for EWS/DMX 6Fire (snd_ice1712). Fixes a systemic error on every boot starting from kernel 5.1 onwards to snd_ice1712 driver ("cannot send pca") on Terratec EWS/DMX 6Fire PCI soundcards. Check for exact and correct return value to snd_i2c_sendbytes call for EWS/DMX 6Fire (snd_ice1712). Fixes a systemic error on every boot to snd_ice1712 driver ("cannot send pca") on Terratec EWS/DMX 6Fire PCI soundcards. Fixes: c99776cc4018 ("ALSA: ice1712: fix a missing check of snd_i2c_sendbytes") Signed-off-by: Rui Nuno Capela <rncbc@rncbc.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-11ALSA: oxfw: allow PCM capture for Stanton SCS.1mTakashi Sakamoto
Stanton SCS.1m can transfer isochronous packet with Multi Bit Linear Audio data channels, therefore it allows software to capture PCM substream. However, ALSA oxfw driver doesn't. This commit changes the driver to add one PCM substream for capture direction. Fixes: de5126cc3c0b ("ALSA: oxfw: add stream format quirk for SCS.1 models") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-11ALSA: firewire-motu: fix destruction of data for isochronous resourcesTakashi Sakamoto
The data for isochronous resources is not destroyed in expected place. This commit fixes the bug. Cc: <stable@vger.kernel.org> # v4.12+ Fixes: 9b2bb4f2f4a2 ("ALSA: firewire-motu: add stream management functionality") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-10Merge tag 'for-linus-20190610' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block cgroup symlink revert from Jens Axboe: "I talked to Tejun about this offline, and he's not a huge fan of the symlink. So let's revert this for now, and Paolo can do this properly for 5.3 instead" * tag 'for-linus-20190610' of git://git.kernel.dk/linux-block: cgroup/bfq: revert bfq.weight symlink change
2019-06-10Merge tag 'regulator-fix-v5.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "Just one driver specific fix here, for a boot regression introduced during some modernization work on the tps6507x driver" * tag 'regulator-fix-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: tps6507x: Fix boot regression due to testing wrong init_data pointer
2019-06-10Merge tag 'spi-fix-v5.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small set of fixes here. One core fix for error handling when we fail to set up the hardware before initiating a transfer and another one reverting a change in the core which broke Raspberry Pi in common use cases as part of some optimization work. There's also a couple of driver specific fixes" * tag 'spi-fix-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: abort spi_sync if failed to prepare_transfer_hardware spi: spi-fsl-spi: call spi_finalize_current_message() at the end spi: bitbang: Fix NULL pointer dereference in spi_unregister_master spi: Fix Raspberry Pi breakage
2019-06-10cgroup: Fix css_task_iter_advance_css_set() cset skip conditionTejun Heo
While adding handling for dying task group leaders c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations") added an inverted cset skip condition to css_task_iter_advance_css_set(). It should skip cset if it's completely empty but was incorrectly testing for the inverse condition for the dying_tasks list. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations") Reported-by: syzbot+d4bba5ccd4f9a2a68681@syzkaller.appspotmail.com
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 19:41:37 +0000