summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-26mac80211: Don't set per-BSS QoS for monitor interfacesSujith
In AP mode, there is no need to notify the driver about QoS changes for the monitor interface that is created. The warning in ieee80211_bss_info_change_notify() would be hit otherwise. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k_hw: simplify noisefloor calibration chainmask calculationFelix Fietkau
The noisefloor array index always corresponds to the rx chain number it belongs to (with an offset of 3 for the extension chain). It's much simpler (and actually more correct) to directly use the chainmask to calculate the bitmask for the noisefloor array, instead of using these weird chip revision checks and hardcoded mask values. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k_hw: fix a small typo in the noisefloor calibration debug codeFelix Fietkau
In the noisefloor array, the extension channel values start at index 3 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k_hw: fix invalid extension channel noisefloor readings in HT20Felix Fietkau
When the hardware is configured in HT20 mode, noise floor readings for the extension channel often return invalid values, which keep the values in the NF history buffer at the hardware-specific maximum limit. Fix this by discarding the extension channel values when in HT20 mode. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k: fix yet another buffer leak in the tx aggregation codeFelix Fietkau
When an aggregation session is being cleaned up, while the tx status for some frames is being processed, the TID is flushed and its buffers are sent out. Unfortunately that left the pending un-acked frames unprocessed, thus leaking buffers. Fix this by reordering the code so that those frames are processed first, before the TID is flushed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26mac80211: fix sta assignmentJohannes Berg
I just had the following: WARNING: at drivers/net/wireless/iwlwifi/iwl-agn-tx.c:574 iwlagn_tx_skb+0x1576/0x15f0 [iwlagn]() Call Trace: <IRQ> [<ffffffff8105c5df>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8105c63a>] warn_slowpath_null+0x1a/0x20 [<ffffffffa0290b46>] iwlagn_tx_skb+0x1576/0x15f0 [iwlagn] [<ffffffffa027076c>] iwl_mac_tx+0x5c/0x260 [iwlagn] [<ffffffffa01bdf5b>] __ieee80211_tx+0x10b/0x1a0 [mac80211] [<ffffffffa01bfb86>] ieee80211_tx_pending+0x186/0x2d0 [mac80211] [<ffffffff81062ea5>] tasklet_action+0x125/0x130 [<ffffffff810634a6>] __do_softirq+0x106/0x270 [<ffffffff8100c09c>] call_softirq+0x1c/0x30 iwlagn 0000:02:00.0: Attempting to modify non-existing station 107 Note that 107 == 0x6b which is slab poison. The reason is that mac80211 passed a freed station pointer to mac80211, because as it happened iwlwifi reset itself while mac80211 was disconnecting from the network. It turns out that we do take care to look up the station pointer in ieee80211_tx_pending_skb, but then don't use it, which obviously is a bug. Fix this by removing the ieee80211_tx_h_sta handler and assigning the station pointer directly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26libertas: precedence bugDan Carpenter
Negate has precedence over comparison so the original test was always false. (Neither 0 nor 1 are equal to NL80211_IFTYPE_MONITOR). Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26cfg80211: fix IBSS default management keyJohannes Berg
When wireless extensions are used to control an encrypted IBSS, we erroneously can try to set the default management key. Fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26mac80211: remove bogus rcu_read_lock()Johannes Berg
Another remnant of the previous key locking scheme needs to be removed -- this causes a warning otherwise as ieee80211_set_default_mgmt_key will acquire a mutex. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26wireless: remove unneeded variable from regulatory_hint_11d()Dan Carpenter
The "rd" variable isn't needed any more since 4f366c5dabcb "wireless: only use alpha2 regulatory information from country IE" Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26mac80211: freeing the wrong variableDan Carpenter
The intent was to free "msp->ratelist" here. "msp->sample_table" is always NULL at this point. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k: Fix inconsistency between txq->stopped and the actual queue stateVasanthakumar Thiagarajan
Sometimes txq state(txq->stopped) can be marked as started but the actual queue may not be started (in ATH_WIPHY_SCAN state, for example). Fix this. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath5k: snprintf() returns largish valuesDan Carpenter
snprintf() returns the number of characters that would have been written (not counting the NUL character). So we can't use it as the limiter to simple_read_from_buffer() without capping it first at sizeof(buf). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k: snprintf() returns largish valuesDan Carpenter
The snprintf() function returns the number of characters that would have been written (not counting the NUL character on the end). It could potentially be larger than the size of the buffer. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26drivers/net/wireless/wl12xx: Use kmemdupJulia Lawall
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26lib80211: remove unused host_build_iv optionJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26minstrel: don't complain about feedback for unrequested ratesJohn W. Linville
"It's not problematic if minstrel gets feedback for rates that it doesn't have in its list, it should just ignore it. - Felix" Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: Felix Fietkau <nbd@openwrt.org>
2010-07-26minstrel_ht: remove unnecessary NULL check in minstrel_ht_update_capsJohn W. Linville
If sta is NULL, we will have problems long before we get here... Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: Felix Fietkau <nbd@openwrt.org>
2010-07-26iwlwifi: assume vif is NULL for internal scans and non-NULL otherwiseJohn W. Linville
The current practice of checking vif for NULL in one place but not another seems to confuse some static checkers, smatch in particular. Since vif will only be NULL in the case of internal scans, adjust the checks accordingly. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26MAINTAINERS: remove entry for wavelanJohn W. Linville
The driver is already removed from drivers/staging. The wireless extensions part is not really valid anymore either, since wext got moved and refactored, etc. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26MAINTAINERS: orphan the zd1201 wireless driverJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26MAINTAINERS: orphan the raylink wireless driverJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26MAINTAINERS: mark prism54 obsoleteJohn W. Linville
The prism54 driver had an entry in feature-removal-schedule.txt and it sees very little activity other than API-change "bombing runs". The mac80211-based p54 driver should be used instead. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26rtl8180: silence "dubious: x | !y" sparse warningJohn W. Linville
CHECK drivers/net/wireless/rtl818x/rtl8180_rtl8225.c drivers/net/wireless/rtl818x/rtl8180_rtl8225.c:53:33: warning: dubious: x | !y The existing code is clever and works fine, but it's not worth even a single line of Sparse warning SPAM... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26rtl8180: improve signal reporting for actual rtl8180 hardwareJohn W. Linville
Adapted from Realtek-provided driver... Signed-off-by: John W. Linville <linville@tuxdriver.com> Tested-by: Pauli Nieminen <suokkos@gmail.com>
2010-07-26wl1251: fix sparse-generated warningsJohn W. Linville
CHECK drivers/net/wireless/wl12xx/wl1251_tx.c drivers/net/wireless/wl12xx/wl1251_tx.c:118:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_tx.c:118:32: expected unsigned short [unsigned] [usertype] frag_threshold drivers/net/wireless/wl12xx/wl1251_tx.c:118:32: got restricted __le16 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_tx.c:164:24: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_tx.c:164:24: expected unsigned short [unsigned] [usertype] length drivers/net/wireless/wl12xx/wl1251_tx.c:164:24: got restricted __le16 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_tx.c:166:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_tx.c:166:22: expected unsigned short [unsigned] [usertype] rate drivers/net/wireless/wl12xx/wl1251_tx.c:166:22: got restricted __le16 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_tx.c:167:29: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_tx.c:167:29: expected unsigned int [unsigned] [usertype] expiry_time drivers/net/wireless/wl12xx/wl1251_tx.c:167:29: got restricted __le32 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_tx.c:200:43: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1251_tx.c:200:43: expected restricted __le16 [usertype] fc drivers/net/wireless/wl12xx/wl1251_tx.c:200:43: got unsigned short [unsigned] [assigned] [usertype] fc CHECK drivers/net/wireless/wl12xx/wl1251_cmd.c drivers/net/wireless/wl12xx/wl1251_cmd.c:428:39: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_cmd.c:428:39: expected unsigned int [unsigned] [usertype] rx_config_options drivers/net/wireless/wl12xx/wl1251_cmd.c:428:39: got restricted __le32 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_cmd.c:429:39: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_cmd.c:429:39: expected unsigned int [unsigned] [usertype] rx_filter_options drivers/net/wireless/wl12xx/wl1251_cmd.c:429:39: got restricted __le32 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_cmd.c:435:29: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_cmd.c:435:29: expected unsigned short [unsigned] [usertype] tx_rate drivers/net/wireless/wl12xx/wl1251_cmd.c:435:29: got restricted __le16 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_cmd.c:439:47: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_cmd.c:439:47: expected unsigned int [unsigned] [usertype] min_duration drivers/net/wireless/wl12xx/wl1251_cmd.c:439:47: got restricted __le32 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_cmd.c:441:47: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_cmd.c:441:47: expected unsigned int [unsigned] [usertype] max_duration drivers/net/wireless/wl12xx/wl1251_cmd.c:441:47: got restricted __le32 [usertype] <noident> CHECK drivers/net/wireless/wl12xx/wl1251_boot.c drivers/net/wireless/wl12xx/wl1251_boot.c:228:22: warning: symbol 'interrupt' shadows an earlier one /home/linville/git/wireless-next-2.6/arch/x86/include/asm/hw_irq.h:132:13: originally declared here Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26iwlagn: use __packed on new structure definitionsJohn W. Linville
"iwlagn: add statistic notification structure for WiFi/BT devices" added several new '__attribute__ ((packed))' lines. Change them to the generic __packed. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-23iwlwifi: remove spurious semicolonsJohannes Berg
defines shouldn't be terminated with a semicolon, the code using them should supply it. Luckily these are not used in a context where it matters. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlwifi: reduce beacon fill conditionsJohannes Berg
Since the ibss_beacon variable will only be filled in the appropriate modes, there's no reason to be checking the mode again. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlwifi: read multiple MAC addressesWey-Yi Guy
Some devices may have multiple MAC addresses in their EEPROM, read them and advertise them to cfg80211. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-07-23iwlwifi: make iwl_mac_beacon_update staticJohannes Berg
This function is only needed in the same file it is defined in, i.e. iwl-core.c Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: fix firmware loading TLV error pathJohannes Berg
gcc complains about the firmware loading: iwl-agn.c: In function ‘iwlagn_load_firmware’: iwl-agn.c:1860: warning: ‘tlv_len’ may be used uninitialized in this function iwl-agn.c:1861: warning: ‘tlv_type’ may be used uninitialized in this function iwl-agn.c:1862: warning: ‘tlv_data’ may be used uninitialized in this function This is almost correct but we do do break out of the TLV parsing loop when setting ret. However, the code is hard to follow, and clearly even the compiler is having issues with it too. Additionally, however, the current code is wrong. If there is a TLV length check error, the code will report invalid TLV after parsing: ... because "len" will still be non-zero as we broke out of the loop. So to remove the warning and fix that issue, make the code easier to read by doing length checking with an error label. As a result, we can completely remove the "ret" variable. Also, while at it, remove the "fixed_tlv_size" variable since each TLV type has its own specified length, it just happens that we have only variable length, flags (0 length) and u32 TLVs right now. It should still be checked with more explicit length checks to make it easier to understand. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlwifi: add TLV to specify the size of phy calibration tableWey-Yi Guy
Different devices have different size of phy calibration table; add new TLV to specify the size. If the TLV is not part of uCode header, the default table size will be used to make sure the backward compatibilities. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: add bluetooth stats to debugfsWey-Yi Guy
For WiFi/BT combo devices, add bluetooth statistics counter read function to debugfs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: Add support for bluetooth statistics notificationWey-Yi Guy
WiFi/BT combo devices has different statistics notification structure, adding the support here to make sure the structure align correctly. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: add .cfg flag to idenfity the need for bt statisticsWey-Yi Guy
Only WiFi/BT combo devices need to use bluetooth version of statistics notification; adding the flag in .cfg file to indicate the need for using different data structure. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: add statistic notification structure for WiFi/BT devicesWey-Yi Guy
If its WiFi/BT combo device, the statistics notification sent by uCode will include the additional BT related statistics counters. Adding new data structure to support the new layout. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-21mac80211: proper IBSS lockingJohannes Berg
IBSS has never had locking, instead relying on some memory barriers etc. That's hard to get right, and I think we had it wrong too until the previous patch. Since this is not performance sensitive, it doesn't make sense to have the maintenance overhead of that, so add proper locking. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-21mac80211: fix IBSS lockdep complaintJohannes Berg
Bob reported a lockdep complaint originating in the mac80211 IBSS code due to the common work struct patch. The reason is that the IBSS and station mode code have different locking orders for the cfg80211 wdev lock and the work struct (where "locking" implies running/canceling). Fix this by simply not canceling the work in the IBSS code, it is not necessary since when the REQ_RUN bit is cleared, the work will run without effect if it runs. When the interface is set down, it is flushed anyway, so there's no concern about it running after memory has been invalidated either. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=16419 Additionally, looking into this I noticed that there's a small window while the IBSS is torn down in which the work may be rescheduled and the REQ_RUN bit be set again after leave() has cleared it when a scan finishes at exactly the same time. Avoid that by setting the ssid_len to zero before clearing REQ_RUN which signals to the scan finish code that this interface is not active. Reported-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-21mac80211: refuse shared key auth when WEP is unavailableJohannes Berg
When WEP is not available, we should reject shared key authentication because it could never succeed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-21cfg80211: fix race between sysfs and cfg80211Maxime Bizon
device_add() is called before adding the phy to the cfg80211 device list. So if a userspace program uses sysfs uevents to detect new phy devices, and queries nl80211 to get phy info, it can get ENODEV even though the phy exists in sysfs. An easy workaround is to hold the cfg80211 mutex until the phy is present in sysfs/cfg80211/debugfs. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-21b43: silence phy_n sparse warningsLarry Finger
drivers/net/wireless/b43/phy_n.c:512:53: warning: cast truncates bits from constant value (ffff0fff becomes fff) drivers/net/wireless/b43/phy_n.c:765:66: warning: cast truncates bits from constant value (ffff7fff becomes 7fff) drivers/net/wireless/b43/phy_n.c:1012:38: warning: cast truncates bits from constant value (ffff00ff becomes ff) drivers/net/wireless/b43/phy_n.c:1119:38: warning: cast truncates bits from constant value (ffff0fff becomes fff) drivers/net/wireless/b43/phy_n.c:2458:56: warning: cast truncates bits from constant value (ffff7fff becomes 7fff) drivers/net/wireless/b43/phy_n.c:2933:38: warning: cast truncates bits from constant value (ffff0fff becomes fff) drivers/net/wireless/b43/phy_n.c:3294:57: warning: cast truncates bits from constant value (ffff3fff becomes 3fff) Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-21b43: silence most sparse warningsJohn W. Linville
CHECK drivers/net/wireless/b43/main.c drivers/net/wireless/b43/main.c:111:5: warning: symbol 'b43_modparam_pio' was not declared. Should it be static? CHECK drivers/net/wireless/b43/phy_g.c drivers/net/wireless/b43/phy_g.c:975:56: warning: cast truncates bits from constant value (ffff7fff becomes 7fff) CHECK drivers/net/wireless/b43/phy_lp.c drivers/net/wireless/b43/phy_lp.c:2701:6: warning: symbol 'b43_lpphy_op_switch_analog' was not declared. Should it be static? drivers/net/wireless/b43/phy_lp.c:1148:30: warning: cast truncates bits from constant value (ffff1fff becomes 1fff) drivers/net/wireless/b43/phy_lp.c:1525:30: warning: cast truncates bits from constant value (ffff1fff becomes 1fff) drivers/net/wireless/b43/phy_lp.c:1529:30: warning: cast truncates bits from constant value (ffff1fff becomes 1fff) CHECK drivers/net/wireless/b43/wa.c drivers/net/wireless/b43/wa.c:385:60: warning: cast truncates bits from constant value (ffff00ff becomes ff) drivers/net/wireless/b43/wa.c:403:55: warning: cast truncates bits from constant value (ffff00ff becomes ff) drivers/net/wireless/b43/wa.c:405:55: warning: cast truncates bits from constant value (ffff00ff becomes ff) drivers/net/wireless/b43/wa.c:415:71: warning: cast truncates bits from constant value (ffff0fff becomes fff) AFAICT, none of these amount to real bugs. But this reduces warning spam from sparse w/o significantly affecting readability of the code (IMHO). Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-20rtl8180: improve signal reporting for rtl8185 hardwareJohn W. Linville
The existing code seemed to be somewhat based on the datasheet, but varied substantially from the vendor-provided driver. This mirrors the handling of the rtl8185 case from that driver, but still neglects the specifics for the rtl8180 hardware. Those details are a bit muddled... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-20mwl8k: correct/silence sparse warningsJohn W. Linville
drivers/net/wireless/mwl8k.c:1541:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/mwl8k.c:1541:21: expected restricted __le16 [usertype] result drivers/net/wireless/mwl8k.c:1541:21: got int drivers/net/wireless/mwl8k.c:1575:42: expected unsigned short [unsigned] [usertype] cmd drivers/net/wireless/mwl8k.c:1575:42: got restricted __le16 [usertype] code drivers/net/wireless/mwl8k.c:1587:50: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/mwl8k.c:1587:50: expected unsigned short [unsigned] [usertype] cmd drivers/net/wireless/mwl8k.c:1587:50: got restricted __le16 [usertype] code drivers/net/wireless/mwl8k.c:1592:50: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/mwl8k.c:1592:50: expected unsigned short [unsigned] [usertype] cmd drivers/net/wireless/mwl8k.c:1592:50: got restricted __le16 [usertype] code drivers/net/wireless/mwl8k.c:1845:27: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/mwl8k.c:1845:27: expected unsigned int [unsigned] [usertype] <noident> drivers/net/wireless/mwl8k.c:1845:27: got restricted __le32 [usertype] <noident> drivers/net/wireless/mwl8k.c:1848:27: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/mwl8k.c:1848:27: expected unsigned int [unsigned] [usertype] <noident> drivers/net/wireless/mwl8k.c:1848:27: got restricted __le32 [usertype] <noident> drivers/net/wireless/mwl8k.c:1851:27: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/mwl8k.c:1851:27: expected unsigned int [unsigned] [usertype] <noident> drivers/net/wireless/mwl8k.c:1851:27: got restricted __le32 [usertype] <noident> drivers/net/wireless/mwl8k.c:1854:27: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/mwl8k.c:1854:27: expected unsigned int [unsigned] [usertype] <noident> drivers/net/wireless/mwl8k.c:1854:27: got restricted __le32 [usertype] <noident> drivers/net/wireless/mwl8k.c:1857:27: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/mwl8k.c:1857:27: expected unsigned int [unsigned] [usertype] <noident> drivers/net/wireless/mwl8k.c:1857:27: got restricted __le32 [usertype] <noident> drivers/net/wireless/mwl8k.c:1860:27: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/mwl8k.c:1860:27: expected unsigned int [unsigned] [usertype] <noident> drivers/net/wireless/mwl8k.c:1860:27: got restricted __le32 [usertype] <noident> drivers/net/wireless/mwl8k.c:3055:20: warning: incorrect type in assignment (different base types) drivers/net/wireless/mwl8k.c:3055:20: expected restricted __le16 [usertype] ht_caps drivers/net/wireless/mwl8k.c:3055:20: got unsigned short [unsigned] [usertype] cap At least the last one looks like a real bug... Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
2010-07-20wireless: remove unnecessary reg_same_country_ie_hintJohn W. Linville
"Might as well remove reg_same_country_ie_hint() completely since we already dealt with suspend/resume through the regulatory hint disconnect." -- Luis Reported-by: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-20rt2x00: correct sparse warning in rt2x00debug.cJohn W. Linville
CHECK drivers/net/wireless/rt2x00/rt2x00debug.c drivers/net/wireless/rt2x00/rt2x00debug.c:193:28: warning: incorrect type in assignment (different base types) drivers/net/wireless/rt2x00/rt2x00debug.c:193:28: expected restricted __le32 [usertype] chip_rev drivers/net/wireless/rt2x00/rt2x00debug.c:193:28: got restricted __le16 [usertype] <noident> Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-07-20libipw: correct sparse warnings and mark some variables staticJohn W. Linville
CHECK drivers/net/wireless/ipw2x00/libipw_module.c drivers/net/wireless/ipw2x00/libipw_module.c:65:21: warning: symbol 'libipw_config_ops' was not declared. Should it be static? drivers/net/wireless/ipw2x00/libipw_module.c:66:6: warning: symbol 'libipw_wiphy_privid' was not declared. Should it be static? CHECK drivers/net/wireless/ipw2x00/libipw_wx.c drivers/net/wireless/ipw2x00/libipw_wx.c:415:17: warning: symbol 'ssid' shadows an earlier one drivers/net/wireless/ipw2x00/libipw_wx.c:324:9: originally declared here Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-20ipw2100: mark ipw2100_pm_qos_req staticJohn W. Linville
CHECK drivers/net/wireless/ipw2x00/ipw2100.c drivers/net/wireless/ipw2x00/ipw2100.c:177:28: warning: symbol 'ipw2100_pm_qos_req' was not declared. Should it be static? Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-20ath9k: correct sparse identified endian bug in ath_paprd_calibrateJohn W. Linville
drivers/net/wireless/ath/ath9k/main.c:282:26: warning: incorrect type in assignment (different base types) drivers/net/wireless/ath/ath9k/main.c:282:26: expected restricted __le16 [usertype] duration_id drivers/net/wireless/ath/ath9k/main.c:282:26: got int Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 07:43:44 +0000