| Age | Commit message (Collapse) | Author |
|---|
|
Fixes for two issues reported by KASAN, a display engine hang due to
incorrect BIOS table parsing, and incorrect LTC interrupt handling on
Maxwell which could lead to a never-ending interrupt storm.
* 'linux-4.7' of git://github.com/skeggsb/linux:
drm/nouveau/disp/sor/gm107: training pattern registers are like gm200
drm/nouveau/disp/sor/gf119: both links use the same training register
drm/nouveau/core: swap the order of imem/fb
drm/nouveau/fbcon: fix out-of-bounds memory accesses
drm/nouveau/gr/gf100-: update sm error decoding from gk20a nvgpu headers
drm/nouveau/ltc/gm107-: fix typo in the address of NV_PLTCG_LTC0_LTS0_INTR
drm/nouveau/bios/disp: fix handling of "match any protocol" entries
|
|
Using flat regmap cache instead of RB-tree to avoid the following
lockdep warning on driver load:
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2755 lockdep_trace_alloc+0x15c/0x160()
DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
The RB-tree regmap cache needs to allocate new space on first
writes. However, allocations in an atomic context (e.g. when a
spinlock is held) are not allowed. The function regmap_write
calls map->lock, which acquires a spinlock in the fast_io case.
Since the FSL DCU driver uses MMIO, the regmap bus of type
regmap_mmio is being used which has fast_io set to true.
Use flat regmap cache and specify max register to be large
enouth to cover all registers available in LS1021a and Vybrids
register space.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Cc: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
|
|
It appears that, for whatever reason, both link A and B use the same
register to control the training pattern. It's a little odd, as the
GPUs before this (Tesla/Fermi1) have per-link registers, as do newer
GPUs (Maxwell).
Fixes the third DP output on NVS 510 (GK107).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
|
|
Protect both the setup of the pageflip event and the
latching of the new requested displaylist head pointer
by the event lock, so we can't get into a situation
where vc4_atomic_flush latches the new display list via
HVS_WRITE, then immediately gets preempted before queueing
the pageflip event, then the page-flip completes in hw and
the vc4_crtc_handle_page_flip() runs and no-ops due to
lack of a pending pageflip event, then vc4_atomic_flush
continues and only then queues the pageflip event - after
the page flip handling already no-oped. This would cause
flip completion handling only at the next vblank - one
frame too late.
In vc4_crtc_handle_page_flip() check the actual DL head
pointer in SCALER_DISPLACTX against the requested pointer
for page flip to make sure that the flip actually really
completed in the current vblank and doesn't get deferred
to the next one because the DL head pointer was written
a bit too late into SCALER_DISPLISTX, after start of
vblank, and missed the boat. This avoids handling a
pageflip completion too early - one frame too early.
According to Eric, DL head pointer updates which were
written into the HVS DISPLISTX reg get committed to hardware
at the last pixel of active scanout. Our vblank interrupt
handler, as triggered by PV_INT_VFP_START irq, gets to run
earliest at the first pixel of HBLANK at the end of the
last scanline of active scanout, ie. vblank irq handling
runs at least 1 pixel duration after a potential pageflip
completion happened in hardware.
This ordering of events in the hardware, together with the
lock protection and SCALER_DISPLACTX sampling of this patch,
guarantees that pageflip completion handling only runs at
exactly the vblank irq of actual pageflip completion in all
cases.
Background info from Eric about the relative timing of
HVS, PV's and trigger points for interrupts, DL updates:
https://lists.freedesktop.org/archives/dri-devel/2016-May/107510.html
Tested on RPi 2B with hardware timing measurement equipment
and shown to no longer complete flips too early or too late.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
|
|
Contrary to other flags to DRM_IOCTL_DEF_DRV(), which restrict usage,
the flag for render node is an enabler (the IOCTL can't be used from
render node if it's not present). So DRM_RENDER_ALLOW needs to be
added to all the flags that were previously 0.
Signed-off-by: Herve Jourdain <herve.jourdain@neuf.fr>
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes: 0cd3e2747662 ("drm/vc4: Add missing render node support")
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Fix printk time stamps on SMP systems which got wrong due to a patch
which was added during the merge window
- Fix two bugs in the stack backtrace code: Races in module unloading
and possible invalid accesses to memory due to wrong instruction
decoding (Mikulas Patocka)
- Fix userspace crash when syscalls access invalid unaligned userspace
addresses. Those syscalls will now return EFAULT as expected.
(tagged for stable kernel series)
* 'parisc-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Move die_if_kernel() prototype into traps.h header
parisc: Fix pagefault crash in unaligned __get_user() call
parisc: Fix printk time during boot
parisc: Fix backtrace on PA-RISC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull key handling update from James Morris:
"This alters a new keyctl function added in the current merge window to
allow for a future extension planned for the next merge window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
KEYS: Add placeholder for KDF usage with DH
|
|
The /dev/ptmx device node is changed to lookup the directory entry "pts"
in the same directory as the /dev/ptmx device node was opened in. If
there is a "pts" entry and that entry is a devpts filesystem /dev/ptmx
uses that filesystem. Otherwise the open of /dev/ptmx fails.
The DEVPTS_MULTIPLE_INSTANCES configuration option is removed, so that
userspace can now safely depend on each mount of devpts creating a new
instance of the filesystem.
Each mount of devpts is now a separate and equal filesystem.
Reserved ttys are now available to all instances of devpts where the
mounter is in the initial mount namespace.
A new vfs helper path_pts is introduced that finds a directory entry
named "pts" in the directory of the passed in path, and changes the
passed in path to point to it. The helper path_pts uses a function
path_parent_directory that was factored out of follow_dotdot.
In the implementation of devpts:
- devpts_mnt is killed as it is no longer meaningful if all mounts of
devpts are equal.
- pts_sb_from_inode is replaced by just inode->i_sb as all cached
inodes in the tty layer are now from the devpts filesystem.
- devpts_add_ref is rolled into the new function devpts_ptmx. And the
unnecessary inode hold is removed.
- devpts_del_ref is renamed devpts_release and reduced to just a
deacrivate_super.
- The newinstance mount option continues to be accepted but is now
ignored.
In devpts_fs.h definitions for when !CONFIG_UNIX98_PTYS are removed as
they are never used.
Documentation/filesystems/devices.txt is updated to describe the current
situation.
This has been verified to work properly on openwrt-15.05, centos5,
centos6, centos7, debian-6.0.2, debian-7.9, debian-8.2, ubuntu-14.04.3,
ubuntu-15.10, fedora23, magia-5, mint-17.3, opensuse-42.1,
slackware-14.1, gentoo-20151225 (13.0?), archlinux-2015-12-01. With the
caveat that on centos6 and on slackware-14.1 that there wind up being
two instances of the devpts filesystem mounted on /dev/pts, the lower
copy does not end up getting used.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg KH <greg@kroah.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Jann Horn <jann@thejh.net>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
One of the debian buildd servers had this crash in the syslog without
any other information:
Unaligned handler failed, ret = -2
clock_adjtime (pid 22578): Unaligned data reference (code 28)
CPU: 1 PID: 22578 Comm: clock_adjtime Tainted: G E 4.5.0-2-parisc64-smp #1 Debian 4.5.4-1
task: 000000007d9960f8 ti: 00000001bde7c000 task.ti: 00000001bde7c000
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00001000000001001111100000001111 Tainted: G E
r00-03 000000ff0804f80f 00000001bde7c2b0 00000000402d2be8 00000001bde7c2b0
r04-07 00000000409e1fd0 00000000fa6f7fff 00000001bde7c148 00000000fa6f7fff
r08-11 0000000000000000 00000000ffffffff 00000000fac9bb7b 000000000002b4d4
r12-15 000000000015241c 000000000015242c 000000000000002d 00000000fac9bb7b
r16-19 0000000000028800 0000000000000001 0000000000000070 00000001bde7c218
r20-23 0000000000000000 00000001bde7c210 0000000000000002 0000000000000000
r24-27 0000000000000000 0000000000000000 00000001bde7c148 00000000409e1fd0
r28-31 0000000000000001 00000001bde7c320 00000001bde7c350 00000001bde7c218
sr00-03 0000000001200000 0000000001200000 0000000000000000 0000000001200000
sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000402d2e84 00000000402d2e88
IIR: 0ca0d089 ISR: 0000000001200000 IOR: 00000000fa6f7fff
CPU: 1 CR30: 00000001bde7c000 CR31: ffffffffffffffff
ORIG_R28: 00000002369fe628
IAOQ[0]: compat_get_timex+0x2dc/0x3c0
IAOQ[1]: compat_get_timex+0x2e0/0x3c0
RP(r2): compat_get_timex+0x40/0x3c0
Backtrace:
[<00000000402d4608>] compat_SyS_clock_adjtime+0x40/0xc0
[<0000000040205024>] syscall_exit+0x0/0x14
This means the userspace program clock_adjtime called the clock_adjtime()
syscall and then crashed inside the compat_get_timex() function.
Syscalls should never crash programs, but instead return EFAULT.
The IIR register contains the executed instruction, which disassebles
into "ldw 0(sr3,r5),r9".
This load-word instruction is part of __get_user() which tried to read the word
at %r5/IOR (0xfa6f7fff). This means the unaligned handler jumped in. The
unaligned handler is able to emulate all ldw instructions, but it fails if it
fails to read the source e.g. because of page fault.
The following program reproduces the problem:
#define _GNU_SOURCE
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/mman.h>
int main(void) {
/* allocate 8k */
char *ptr = mmap(NULL, 2*4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
/* free second half (upper 4k) and make it invalid. */
munmap(ptr+4096, 4096);
/* syscall where first int is unaligned and clobbers into invalid memory region */
/* syscall should return EFAULT */
return syscall(__NR_clock_adjtime, 0, ptr+4095);
}
To fix this issue we simply need to check if the faulting instruction address
is in the exception fixup table when the unaligned handler failed. If it
is, call the fixup routine instead of crashing.
While looking at the unaligned handler I found another issue as well: The
target register should not be modified if the handler was unsuccessful.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
|
|
Avoid showing invalid printk time stamps during boot.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi>
|
|
This patch fixes backtrace on PA-RISC
There were several problems:
1) The code that decodes instructions handles instructions that subtract
from the stack pointer incorrectly. If the instruction subtracts the
number X from the stack pointer the code increases the frame size by
(0x100000000-X). This results in invalid accesses to memory and
recursive page faults.
2) Because gcc reorders blocks, handling instructions that subtract from
the frame pointer is incorrect. For example, this function
int f(int a)
{
if (__builtin_expect(a, 1))
return a;
g();
return a;
}
is compiled in such a way, that the code that decreases the stack
pointer for the first "return a" is placed before the code for "g" call.
If we recognize this decrement, we mistakenly believe that the frame
size for the "g" call is zero.
To fix problems 1) and 2), the patch doesn't recognize instructions that
decrease the stack pointer at all. To further safeguard the unwind code
against nonsense values, we don't allow frame size larger than
Total_frame_size.
3) The backtrace is not locked. If stack dump races with module unload,
invalid table can be accessed.
This patch adds a spinlock when processing module tables.
Note, that for correct backtrace, you need recent binutils.
Binutils 2.18 from Debian 5 produce garbage unwind tables.
Binutils 2.21 work better (it sometimes forgets function frames, but at
least it doesn't generate garbage).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A bunch of ARM drivers got into the fixes vibe this time around, so
this contains a bunch of fixes for imx, atmel hlcdc, arm hdlcd (only
so many combos of hlcd), mediatek and omap drm.
Other than that there is one mgag200 fix and a few core drm regression
fixes"
* tag 'drm-fixes-for-v4.7-rc2' of git://people.freedesktop.org/~airlied/linux: (34 commits)
drm/omap: fix unused variable warning.
drm: hdlcd: Add information about the underlying framebuffers in debugfs
drm: hdlcd: Cleanup the atomic plane operations
drm/hdlcd: Fix up crtc_state->event handling
drm: hdlcd: Revamp runtime power management
drm/mediatek: mtk_dsi: Remove spurious drm_connector_unregister
drm/mediatek: mtk_dpi: remove invalid error message
drm: atmel-hlcdc: fix a NULL check
drm: atmel-hlcdc: fix atmel_hlcdc_crtc_reset() implementation
drm/mgag200: Black screen fix for G200e rev 4
drm: Wrap direct calls to driver->gem_free_object from CMA
drm: fix fb refcount issue with atomic modesetting
drm: make drm_atomic_set_mode_prop_for_crtc() more reliable
drm/sti: remove extra mode fixup
drm: add missing drm_mode_set_crtcinfo call
drm/omap: include gpio/consumer.h where needed
drm/omap: include linux/seq_file.h where needed
Revert "drm/omap: no need to select OMAP2_DSS"
drm/omap: Remove regulator API abuse
OMAPDSS: HDMI5: Change DDC timings
...
|
|
Pull VFIO fixes from Alex Williamson:
"Fix irqfd shutdown ordering, build warning, and VPD short read"
* tag 'vfio-v4.7-rc2' of git://github.com/awilliam/linux-vfio:
vfio/pci: Allow VPD short read
vfio/type1: Fix build warning
vfio/pci: Fix ordering of eventfd vs virqfd shutdown
|
|
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix/restore behaviour when selecting bus width for (e)MMC
MMC host:
- sunxi: Fix eMMC HS-DDR modes on Allwinner A80"
* tag 'mmc-v4.7-rc1-2' of git://git.linaro.org/people/ulf.hansson/mmc:
mmc: sunxi: Re-enable eMMC HS-DDR modes on Allwinner A80
mmc: sunxi: Fix DDR MMC timings for A80
mmc: fix mmc mode selection for HS-DDR and higher
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"The important part of this pull is Filipe's set of fixes for btrfs
device replacement. Filipe fixed a few issues seen on the list and a
number he found on his own"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: deal with duplciates during extent_map insertion in btrfs_get_extent
Btrfs: fix race between device replace and read repair
Btrfs: fix race between device replace and discard
Btrfs: fix race between device replace and chunk allocation
Btrfs: fix race setting block group back to RW mode during device replace
Btrfs: fix unprotected assignment of the left cursor for device replace
Btrfs: fix race setting block group readonly during device replace
Btrfs: fix race between device replace and block group removal
Btrfs: fix race between readahead and device replace/removal
|
|
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
If submit fails, before fence is created or before submit is added to
submit-list, then unitialized fields cause problems in the clean-up
path.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Some, but not all, callers of obj->vmap() would check if return
IS_ERR(). So let's actually return an error if vmap() fails. And fixup
the call-sites that were not handling this properly.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph fixes from Sage Weil:
"We have a few follow-up fixes for the libceph refactor from Ilya, and
then some cephfs + fscache fixes from Zheng.
The first two FS-Cache patches are acked by David Howells and deemed
trivial enough to go through our tree. The rest fix some issues with
the ceph fscache handling (disable cache for inodes opened for write,
and simplify the revalidation logic accordingly, dropping the
now-unnecessary work queue)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: use i_version to check validity of fscache
ceph: improve fscache revalidation
ceph: disable fscache when inode is opened for write
ceph: avoid unnecessary fscache invalidation/revlidation
ceph: call __fscache_uncache_page() if readpages fails
FS-Cache: make check_consistency callback return int
FS-Cache: wake write waiter after invalidating writes
libceph: use %s instead of %pE in dout()s
libceph: put request only if it's done in handle_reply()
libceph: change ceph_osdmap_flag() to take osdc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Two fixes for problems introduced recently (ACPICA and the ACPI
backlight driver) and one fix for an older issue that prevents at
least one system from booting.
Specifics:
- Fix an incorrect check introduced by recent ACPICA changes which
causes problems with booting KVM guests to happen, among other
things (Lv Zheng).
- Fix a backlight issue introduced by recent changes to the ACPI
video driver (Aaron Lu).
- Fix the ACPI processor initialization which attempts to register an
IO region without checking if that really is necessary and
sometimes prevents drivers loaded subsequently from registering
their resources which leads to boot issues (Rafael Wysocki)"
* tag 'acpi-4.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / processor: Avoid reserving IO regions too early
ACPICA / Hardware: Fix old register check in acpi_hw_get_access_bit_width()
ACPI / Thermal / video: fix max_level incorrect value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Two fixes for problems introduced recently in the cpufreq core and the
intel_pstate driver.
Specifics:
- Fix a silly mistake related to the clamp_val() usage in a function
added by a recent commit (Rafael Wysocki).
- Reduce the log level of an annoying message added to intel_pstate
during the recent merge window (Srinivas Pandruvada)"
* tag 'pm-4.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Fix clamp_val() usage in cpufreq_driver_fast_switch()
cpufreq: intel_pstate: Downgrade print level for _PPC
|
|
Merge various fixes from Andrew Morton:
"10 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, page_alloc: recalculate the preferred zoneref if the context can ignore memory policies
mm, page_alloc: reset zonelist iterator after resetting fair zone allocation policy
mm, oom_reaper: do not use siglock in try_oom_reaper()
mm, page_alloc: prevent infinite loop in buffered_rmqueue()
checkpatch: reduce git commit description style false positives
mm/z3fold.c: avoid modifying HEADLESS page and minor cleanup
memcg: add RCU locking around css_for_each_descendant_pre() in memcg_offline_kmem()
mm: check the return value of lookup_page_ext for all call sites
kdump: fix dmesg gdbmacro to work with record based printk
mm: fix overflow in vm_map_ram()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
- a few simple fixes for fallout from the recent gic-v3 changes
- a workaround for a Cavium thunderX erratum
- a bugfix for the pic32 irqchip to make external interrupts work proper
- a missing return value in the generic IPI management code
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-pic32-evic: Fix bug with external interrupts.
irqchip/gicv3-its: numa: Enable workaround for Cavium thunderx erratum 23144
irqchip/gic-v3: Fix quiescence check in gic_enable_redist
irqchip/gic-v3: Fix copy+paste mistakes in defines
irqchip/gic-v3: Fix ICC_SGI1R_EL1.INTID decoding mask
genirq: Fix missing return value in irq_destroy_ipi()
|
|
memory policies
The optimistic fast path may use cpuset_current_mems_allowed instead of
of a NULL nodemask supplied by the caller for cpuset allocations. The
preferred zone is calculated on this basis for statistic purposes and as
a starting point in the zonelist iterator.
However, if the context can ignore memory policies due to being atomic
or being able to ignore watermarks then the starting point in the
zonelist iterator is no longer correct. This patch resets the zonelist
iterator in the allocator slowpath if the context can ignore memory
policies. This will alter the zone used for statistics but only after
it is known that it makes sense for that context. Resetting it before
entering the slowpath would potentially allow an ALLOC_CPUSET allocation
to be accounted for against the wrong zone. Note that while nodemask is
not explicitly set to the original nodemask, it would only have been
overwritten if cpuset_enabled() and it was reset before the slowpath was
entered.
Link: http://lkml.kernel.org/r/20160602103936.GU2527@techsingularity.net
Fixes: c33d6c06f60f710 ("mm, page_alloc: avoid looking up the first zone in a zonelist twice")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
policy
Geert Uytterhoeven reported the following problem that bisected to
commit c33d6c06f60f ("mm, page_alloc: avoid looking up the first zone
in a zonelist twice") on m68k/ARAnyM
BUG: scheduling while atomic: cron/668/0x10c9a0c0
Modules linked in:
CPU: 0 PID: 668 Comm: cron Not tainted 4.6.0-atari-05133-gc33d6c06f60f710f #364
Call Trace: [<0003d7d0>] __schedule_bug+0x40/0x54
__schedule+0x312/0x388
__schedule+0x0/0x388
prepare_to_wait+0x0/0x52
schedule+0x64/0x82
schedule_timeout+0xda/0x104
set_next_entity+0x18/0x40
pick_next_task_fair+0x78/0xda
io_schedule_timeout+0x36/0x4a
bit_wait_io+0x0/0x40
bit_wait_io+0x12/0x40
__wait_on_bit+0x46/0x76
wait_on_page_bit_killable+0x64/0x6c
bit_wait_io+0x0/0x40
wake_bit_function+0x0/0x4e
__lock_page_or_retry+0xde/0x124
do_scan_async+0x114/0x17c
lookup_swap_cache+0x24/0x4e
handle_mm_fault+0x626/0x7de
find_vma+0x0/0x66
down_read+0x0/0xe
wait_on_page_bit_killable_timeout+0x77/0x7c
find_vma+0x16/0x66
do_page_fault+0xe6/0x23a
res_func+0xa3c/0x141a
buserr_c+0x190/0x6d4
res_func+0xa3c/0x141a
buserr+0x20/0x28
res_func+0xa3c/0x141a
buserr+0x20/0x28
The relationship is not obvious but it's due to a failure to rescan the
full zonelist after the fair zone allocation policy exhausts the batch
count. While this is a functional problem, it's also a performance
issue. A page allocator microbenchmark showed the following
4.7.0-rc1 4.7.0-rc1
vanilla reset-v1r2
Min alloc-odr0-1 327.00 ( 0.00%) 326.00 ( 0.31%)
Min alloc-odr0-2 235.00 ( 0.00%) 235.00 ( 0.00%)
Min alloc-odr0-4 198.00 ( 0.00%) 198.00 ( 0.00%)
Min alloc-odr0-8 170.00 ( 0.00%) 170.00 ( 0.00%)
Min alloc-odr0-16 156.00 ( 0.00%) 156.00 ( 0.00%)
Min alloc-odr0-32 150.00 ( 0.00%) 150.00 ( 0.00%)
Min alloc-odr0-64 146.00 ( 0.00%) 146.00 ( 0.00%)
Min alloc-odr0-128 145.00 ( 0.00%) 145.00 ( 0.00%)
Min alloc-odr0-256 155.00 ( 0.00%) 155.00 ( 0.00%)
Min alloc-odr0-512 168.00 ( 0.00%) 165.00 ( 1.79%)
Min alloc-odr0-1024 175.00 ( 0.00%) 174.00 ( 0.57%)
Min alloc-odr0-2048 180.00 ( 0.00%) 180.00 ( 0.00%)
Min alloc-odr0-4096 187.00 ( 0.00%) 186.00 ( 0.53%)
Min alloc-odr0-8192 190.00 ( 0.00%) 190.00 ( 0.00%)
Min alloc-odr0-16384 191.00 ( 0.00%) 191.00 ( 0.00%)
Min alloc-odr1-1 736.00 ( 0.00%) 445.00 ( 39.54%)
Min alloc-odr1-2 343.00 ( 0.00%) 335.00 ( 2.33%)
Min alloc-odr1-4 277.00 ( 0.00%) 270.00 ( 2.53%)
Min alloc-odr1-8 238.00 ( 0.00%) 233.00 ( 2.10%)
Min alloc-odr1-16 224.00 ( 0.00%) 218.00 ( 2.68%)
Min alloc-odr1-32 210.00 ( 0.00%) 208.00 ( 0.95%)
Min alloc-odr1-64 207.00 ( 0.00%) 203.00 ( 1.93%)
Min alloc-odr1-128 276.00 ( 0.00%) 202.00 ( 26.81%)
Min alloc-odr1-256 206.00 ( 0.00%) 202.00 ( 1.94%)
Min alloc-odr1-512 207.00 ( 0.00%) 202.00 ( 2.42%)
Min alloc-odr1-1024 208.00 ( 0.00%) 205.00 ( 1.44%)
Min alloc-odr1-2048 213.00 ( 0.00%) 212.00 ( 0.47%)
Min alloc-odr1-4096 218.00 ( 0.00%) 216.00 ( 0.92%)
Min alloc-odr1-8192 341.00 ( 0.00%) 219.00 ( 35.78%)
Note that order-0 allocations are unaffected but higher orders get a
small boost from this patch and a large reduction in system CPU usage
overall as can be seen here:
4.7.0-rc1 4.7.0-rc1
vanilla reset-v1r2
User 85.32 86.31
System 2221.39 2053.36
Elapsed 2368.89 2202.47
Fixes: c33d6c06f60f ("mm, page_alloc: avoid looking up the first zone in a zonelist twice")
Link: http://lkml.kernel.org/r/20160531100848.GR2527@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Oleg has noted that siglock usage in try_oom_reaper is both pointless
and dangerous. signal_group_exit can be checked lockless. The problem
is that sighand becomes NULL in __exit_signal so we can crash.
Fixes: 3ef22dfff239 ("oom, oom_reaper: try to reap tasks which skip regular OOM killer path")
Link: http://lkml.kernel.org/r/1464679423-30218-1-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In DEBUG_VM kernel, we can hit infinite loop for order == 0 in
buffered_rmqueue() when check_new_pcp() returns 1, because the bad page
is never removed from the pcp list. Fix this by removing the page
before retrying. Also we don't need to check if page is non-NULL,
because we simply grab it from the list which was just tested for being
non-empty.
Fixes: 479f854a207c ("mm, page_alloc: defer debugging checks of pages allocated from the PCP")
Link: http://lkml.kernel.org/r/20160530090154.GM2527@techsingularity.net
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some lines in a commit log appear to be commit SHA1 ids like:
ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 0123456789ab ("commit description")'
Link: http://lkml.kernel.org/r/40e03fd7aaf1f55c75d787128d6d17c5a71226c2.1464358556.git.vdavydov@virtuozzo.com
Reduce the false positives.
Link: http://lkml.kernel.org/r/eda977eaa8328fef42bb3c87935d97e10ea8ff67.1464384023.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix erroneous z3fold header access in a HEADLESS page in reclaim
function, and change one remaining direct handle-to-buddy conversion to
use the appropriate helper.
Link: http://lkml.kernel.org/r/5748706F.9020208@gmail.com
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjenning@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
memcg_offline_kmem()
memcg_offline_kmem() may be called from memcg_free_kmem() after a css
init failure. memcg_free_kmem() is a ->css_free callback which is
called without cgroup_mutex and memcg_offline_kmem() ends up using
css_for_each_descendant_pre() without any locking. Fix it by adding rcu
read locking around it.
mkdir: cannot create directory `65530': No space left on device
===============================
[ INFO: suspicious RCU usage. ]
4.6.0-work+ #321 Not tainted
-------------------------------
kernel/cgroup.c:4008 cgroup_mutex or RCU read lock required!
[ 527.243970] other info that might help us debug this:
[ 527.244715]
rcu_scheduler_active = 1, debug_locks = 0
2 locks held by kworker/0:5/1664:
#0: ("cgroup_destroy"){.+.+..}, at: [<ffffffff81060ab5>] process_one_work+0x165/0x4a0
#1: ((&css->destroy_work)#3){+.+...}, at: [<ffffffff81060ab5>] process_one_work+0x165/0x4a0
[ 527.248098] stack backtrace:
CPU: 0 PID: 1664 Comm: kworker/0:5 Not tainted 4.6.0-work+ #321
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014
Workqueue: cgroup_destroy css_free_work_fn
Call Trace:
dump_stack+0x68/0xa1
lockdep_rcu_suspicious+0xd7/0x110
css_next_descendant_pre+0x7d/0xb0
memcg_offline_kmem.part.44+0x4a/0xc0
mem_cgroup_css_free+0x1ec/0x200
css_free_work_fn+0x49/0x5e0
process_one_work+0x1c5/0x4a0
worker_thread+0x49/0x490
kthread+0xea/0x100
ret_from_fork+0x1f/0x40
Link: http://lkml.kernel.org/r/20160526203018.GG23194@mtj.duckdns.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org> [4.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer bugfix from Thomas Gleixner:
"A single bugfix for the error check wreckage we introduced in the
merge window"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Make settimeofday error checking work again
|
|
Per the discussion with Joonsoo Kim [1], we need check the return value
of lookup_page_ext() for all call sites since it might return NULL in
some cases, although it is unlikely, i.e. memory hotplug.
Tested with ltp with "page_owner=0".
[1] http://lkml.kernel.org/r/20160519002809.GA10245@js1304-P5Q-DELUXE
[akpm@linux-foundation.org: fix build-breaking typos]
[arnd@arndb.de: fix build problems from lookup_page_ext]
Link: http://lkml.kernel.org/r/6285269.2CksypHdYp@wuerfel
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/1464023768-31025-1-git-send-email-yang.shi@linaro.org
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 7ff9554bb578 ("printk: convert byte-buffer to variable-length
record buffer") introduced a record based printk buffer. Modify
gdbmacros.txt to parse this new structure so dmesg will work properly.
Link: http://lkml.kernel.org/r/1463515794-1599-1-git-send-email-minyard@acm.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When remapping pages accounting for 4G or more memory space, the
operation 'count << PAGE_SHIFT' overflows as it is performed on an
integer. Solution: cast before doing the bitshift.
[akpm@linux-foundation.org: fix vm_unmap_ram() also]
[akpm@linux-foundation.org: fix vmap() as well, per Guillermo]
Link: http://lkml.kernel.org/r/etPan.57175fb3.7a271c6b.2bd@naudit.es
Signed-off-by: Guillermo Julián Moreno <guillermo.julian@naudit.es>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull ARM fix from Russell King:
"Just one fix to the ptrace code, spotted by Simon Marchi, where if a
thread migrates to a different CPU and the VFP registers are changed
through ptrace, the application doesn't see the updated VFP registers"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: fix PTRACE_SETVFPREGS on SMP systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main thing here is reviving hugetlb support using contiguous ptes,
which we ended up reverting at the last minute in 4.5 pending a fix
which went into the core mm/ code during the recent merge window.
- Revert a previous revert and get hugetlb going with contiguous hints
- Wire up missing compat syscalls
- Enable CONFIG_SET_MODULE_RONX by default
- Add missing line to our compat /proc/cpuinfo output
- Clarify levels in our page table dumps
- Fix booting with RANDOMIZE_TEXT_OFFSET enabled
- Misc fixes to the ARM CPU PMU driver (refcounting, probe failure)
- Remove some dead code and update a comment"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: fix alignment when RANDOMIZE_TEXT_OFFSET is enabled
arm64: move {PAGE,CONT}_SHIFT into Kconfig
arm64: mm: dump: log span level
arm64: update stale PAGE_OFFSET comment
drivers/perf: arm_pmu: Avoid leaking pmu->irq_affinity on error
drivers/perf: arm_pmu: Defer the setting of __oprofile_cpu_pmu
drivers/perf: arm_pmu: Fix reference count of a device_node in of_pmu_irq_cfg
arm64: report CPU number in bad_mode
arm64: unistd32.h: wire up missing syscalls for compat tasks
arm64: Provide "model name" in /proc/cpuinfo for PER_LINUX32 tasks
arm64: enable CONFIG_SET_MODULE_RONX by default
arm64: Remove orphaned __addr_ok() definition
Revert "arm64: hugetlb: partial revert of 66b3923a1a0f"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Handle RTAS delay requests in configure_bridge from Russell Currey
- Refactor the configure_bridge RTAS tokens from Russell Currey
- Fix definition of SIAR and SDAR registers from Thomas Huth
- Use privileged SPR number for MMCR2 from Thomas Huth
- Update LPCR only if it is powernv from Aneesh Kumar K.V
- Fix the reference bit update when handling hash fault from Aneesh
Kumar K.V
- Add missing tlb flush from Aneesh Kumar K.V
- Add POWER8NVL support to ibm,client-architecture-support call from
Thomas Huth
* tag 'powerpc-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call
powerpc/mm/radix: Add missing tlb flush
powerpc/mm/hash: Fix the reference bit update when handling hash fault
powerpc/mm/radix: Update LPCR only if it is powernv
powerpc: Use privileged SPR number for MMCR2
powerpc: Fix definition of SIAR and SDAR registers
powerpc/pseries/eeh: Refactor the configure_bridge RTAS tokens
powerpc/pseries/eeh: Handle RTAS delay requests in configure_bridge
|
|
* acpica-fixes:
ACPICA / Hardware: Fix old register check in acpi_hw_get_access_bit_width()
* acpi-video:
ACPI / Thermal / video: fix max_level incorrect value
* acpi-processor:
ACPI / processor: Avoid reserving IO regions too early
|
|
* pm-cpufreq-fixes:
cpufreq: Fix clamp_val() usage in cpufreq_driver_fast_switch()
cpufreq: intel_pstate: Downgrade print level for _PPC
|
|
When dealing with inline extents, btrfs_get_extent will incorrectly try
to insert a duplicate extent_map. The dup hits -EEXIST from
add_extent_map, but then we try to merge with the existing one and end
up trying to insert a zero length extent_map.
This actually works most of the time, except when there are extent maps
past the end of the inline extent. rocksdb will trigger this sometimes
because it preallocates an extent and then truncates down.
Josef made a script to trigger with xfs_io:
#!/bin/bash
xfs_io -f -c "pwrite 0 1000" inline
xfs_io -c "falloc -k 4k 1M" inline
xfs_io -c "pread 0 1000" -c "fadvise -d 0 1000" -c "pread 0 1000" inline
xfs_io -c "fadvise -d 0 1000" inline
cat inline
You'll get EIOs trying to read inline after this because add_extent_map
is returning EEXIST
Signed-off-by: Chris Mason <clm@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Merge irqchip updates from Marc Zyngier:
- A number of embarassing buglets (GICv3, PIC32)
- A more substential errata workaround for Cavium's GICv3 ITS
(kept for post-rc1 due to its dependency on NUMA)
|
|
With ARM64_64K_PAGES and RANDOMIZE_TEXT_OFFSET enabled, we hit the
following issue on the boot:
kernel BUG at arch/arm64/mm/mmu.c:480!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0 #310
Hardware name: ARM Juno development board (r2) (DT)
task: ffff000008d58a80 ti: ffff000008d30000 task.ti: ffff000008d30000
PC is at map_kernel_segment+0x44/0xb0
LR is at paging_init+0x84/0x5b0
pc : [<ffff000008c450b4>] lr : [<ffff000008c451a4>] pstate: 600002c5
Call trace:
[<ffff000008c450b4>] map_kernel_segment+0x44/0xb0
[<ffff000008c451a4>] paging_init+0x84/0x5b0
[<ffff000008c42728>] setup_arch+0x198/0x534
[<ffff000008c40848>] start_kernel+0x70/0x388
[<ffff000008c401bc>] __primary_switched+0x30/0x74
Commit 7eb90f2ff7e3 ("arm64: cover the .head.text section in the .text
segment mapping") removed the alignment between the .head.text and .text
sections, and used the _text rather than the _stext interval for mapping
the .text segment.
Prior to this commit _stext was always section aligned and didn't cause
any issue even when RANDOMIZE_TEXT_OFFSET was enabled. Since that
alignment has been removed and _text is used to map the .text segment,
we need ensure _text is always page aligned when RANDOMIZE_TEXT_OFFSET
is enabled.
This patch adds logic to TEXT_OFFSET fuzzing to ensure that the offset
is always aligned to the kernel page size. To ensure this, we rely on
the PAGE_SHIFT being available via Kconfig.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: 7eb90f2ff7e3 ("arm64: cover the .head.text section in the .text segment mapping")
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In some cases (e.g. the awk for CONFIG_RANDOMIZE_TEXT_OFFSET) we would
like to make use of PAGE_SHIFT outside of code that can include the
usual header files.
Add a new CONFIG_ARM64_PAGE_SHIFT for this, likewise with
ARM64_CONT_SHIFT for consistency.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The page table dump code logs spans of entries at the same level
(pgd/pud/pmd/pte) which have the same attributes. While we log the
(decoded) attributes, we don't log the level, which leaves the output
ambiguous and/or confusing in some cases.
For example:
0xffff800800000000-0xffff800980000000 6G RW NX SHD AF BLK UXN MEM/NORMAL
If using 4K pages, this may describe a span of 6 1G block entries at the
PGD/PUD level, or 3072 2M block entries at the PMD level.
This patch adds the page table level to each output line, removing this
ambiguity. For the example above, this will produce:
0xffffffc800000000-0xffffffc980000000 6G PUD RW NX SHD AF BLK UXN MEM/NORMAL
When 3 level tables are in use, and we use the asm-generic/nopud.h
definitions, the dump code treats each entry in the PGD as a 1 element
table at the PUD level, and logs spans as being PUDs, which can be
confusing. To counteract this, the "PUD" mnemonic is replaced with "PGD"
when CONFIG_PGTABLE_LEVELS <= 3. Likewise for "PMD" when
CONFIG_PGTABLE_LEVELS <= 2.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Huang Shijie <shijie.huang@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Commit ab893fb9f1b17f02 ("arm64: introduce KIMAGE_VADDR as the virtual
base of the kernel region") logically split KIMAGE_VADDR from
PAGE_OFFSET, and since commit f9040773b7bbbd9e ("arm64: move kernel
image to base of vmalloc area") the two have been distinct values.
Unfortunately, neither commit updated the comment above these
definitions, which now erroneously states that PAGE_OFFSET is the start
of the kernel image rather than the start of the linear mapping.
This patch fixes said comment, and introduces an explanation of
KIMAGE_VADDR.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
pmu->irq_affinity will not be freed if an error occurred within
arm_pmu_device_probe after of_pmu_irq_cfg has been called.
Note that in the case of_pmu_irq_cfg is returning an error,
pmu->irq_affinity will not be set, but it should be NULL as pmu was
kzalloc'd. Therefore the result kfree(NULL) is benign.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The global variable __oprofile_cpu_pmu is set before the PMU is fully
initialized. If an error occurs before the end of the initialization,
the PMU will be freed and the variable will contain an invalid pointer.
This will result in a kernel crash when perf will be used.
Fix it by moving the setting of __oprofile_cpu_pmu when the PMU is fully
initialized (i.e when it is no longer possible to fail).
Cc: <stable@vger.kernel.org>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
