summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-24Input: wacom - add support to Cintiq 22HDPing Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-24Input: add driver for FT5x06 based EDT displaysSimon Budig
This is a driver for the EDT "Polytouch" family of touch controllers based on the FocalTech FT5x06 line of chips. Signed-off-by: Simon Budig <simon.budig@kernelconcepts.de> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-17Input: add MELFAS mms114 touchscreen driverJoonyoung Shim
This is a initial driver for new touchscreen chip mms114 of MELFAS. It uses I2C interface and supports 10 multi touch. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-17Input: add support for key scan interface of the LPC32xx SoCRoland Stigge
This is a driver for the key scan interface of the LPC32xx SoC Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-17Input: omap4-keypad - add device tree supportSourav Poddar
Add device tree support for omap4 keypad driver and update the Documentation with omap4 keypad device tree binding information. Tested on omap4430 sdp. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-13Input: hanwang - add support for Art Master II tabletweixing
This change adds support for old Hanwang Art master II tablet Signed-off-by: weixing <weixing@hanwang.com.cn> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-13Input: spear_keyboard - reconfigure operating frequency on suspendShiraz Hashim
On some platform it may happen that the input clock to keyboard may change during suspend, thus impacting its wakeup capability. There is no means for keyboard driver to know this frequency before hand. Hence introduce a platform data 'suspended_rate' which indicates the frequency during suspend at which keyboard operates. Accordingly reprogram keyboard while going into suspend and restore original configuration at the time of resume. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-13Input: spear_keyboard - fix clock handling during suspend/resumeShiraz Hashim
SPEAr keyboard should normally disable clock during suspend and enable it during resume. For cases where it is expected to act as a wakeup source the clock can remain in the same state i.e. kept enabled if it is being used. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-07Input: ff-memless - fix a couple min_t() castsDan Carpenter
envelope->attack_level is a u16 type. We're trying to clamp it here so it's between 0 and 0x7fff. Unfortunately, the cast to __s16 turns all the values larger than 0x7fff into negative numbers and min_t() thinks they are less than 0x7fff. envelope_level is an int so now we've got negative values stored there. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-07Input: synaptics - print firmware ID and board number at initDaniel Kurtz
Read the Firmware ID and Board Number from a synaptics device at init and display them in the system log. Device behavior is very board and firmware dependent. It may prove useful for users to include this information when providing bug reports or other feedback. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-07Input: spear_keyboard - generalize keyboard frequency configurationShiraz Hashim
Current implementation hard coded keyboard frequency configuration assuming input clock as fixed APB (83 MHz). Generalize the configuration using clock framework APIs. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-07Input: spear_keyboard - rename bit definitions to reflect registerShiraz Hashim
Rename bit definition macros to reflect keyboard registers clearly thus being more readable. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-07Input: spear_keyboard - use correct io accessorsShiraz Hashim
All SPEAr keyboard registers are 32 bit wide and are word aligned. This patch aligns all io access to be word size using relaxed version of readl/writel. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-07Input: spear-keyboard - fix disable device_init_wakeup in removeVipul Kumar Samar
This patch is to disable device wakeup while removing keyboard. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-07Input: wacom_i2c - fix compiler warningDmitry Torokhov
Apparently GCC can't figure out that we bail if we fail to query device and will not try to use 'features': drivers/input/touchscreen/wacom_i2c.c: In function ‘wacom_i2c_probe’: drivers/input/touchscreen/wacom_i2c.c:177:20: warning: ‘features.fw_version’ may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-07-07Pull input changes from Henrik Rydberg, including large update toDmitry Torokhov
atmel_mxt_ts driver by Daniel and MT protocol addition for win8 devices. Conflicts: drivers/input/touchscreen/atmel_mxt_ts.c
2012-07-07Merge branch 'for-linus' to bring in change ensuring that drivers thatDmitry Torokhov
use threaded IRQs use IRQF_ONESHOT.
2012-07-06Input: imx_keypad - check error returned by clk_prepare_enable()Fabio Estevam
Check error returned by clk_prepare_enable(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-06Input: imx_keypad - adapt the new kpp clock nameFabio Estevam
With the new i.mx clock framework we should pass NULL as the keypad clock name. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-06Input: imx_keypad - use clk_prepare_enable/clk_disable_unprepare()Fabio Estevam
Adapt clock handling to the new i.mx clock framework and fix the following warning: input: imx-keypad as /devices/platform/imx-keypad/input/input0 ------------[ cut here ]------------ WARNING: at drivers/clk/clk.c:511 __clk_enable+0x98/0xa8() Modules linked in: [<c001a680>] (unwind_backtrace+0x0/0xf4) from [<c002452c>] (warn_slowpath_commo) [<c002452c>] (warn_slowpath_common+0x48/0x60) from [<c0024560>] (warn_slowpath_) [<c0024560>] (warn_slowpath_null+0x1c/0x24) from [<c02c4ec4>] (__clk_enable+0x9) [<c02c4ec4>] (__clk_enable+0x98/0xa8) from [<c02c4ef8>] (clk_enable+0x24/0x5c) [<c02c4ef8>] (clk_enable+0x24/0x5c) from [<c027ac6c>] (imx_keypad_open+0x28/0xc) [<c027ac6c>] (imx_keypad_open+0x28/0xc8) from [<c0274b14>] (input_open_device+0) [<c0274b14>] (input_open_device+0x78/0xa8) from [<c01ec884>] (kbd_connect+0x60/) [<c01ec884>] (kbd_connect+0x60/0x80) from [<c0273b94>] (input_attach_handler+0x) [<c0273b94>] (input_attach_handler+0x220/0x258) from [<c02755d4>] (input_regist) [<c02755d4>] (input_register_device+0x31c/0x390) from [<c038da1c>] (imx_keypad_) [<c038da1c>] (imx_keypad_probe+0x2e4/0x3b8) from [<c020326c>] (platform_drv_pro) [<c020326c>] (platform_drv_probe+0x18/0x1c) from [<c0201f64>] (driver_probe_dev) [<c0201f64>] (driver_probe_device+0x84/0x210) from [<c020217c>] (__driver_attac) [<c020217c>] (__driver_attach+0x8c/0x90) from [<c02008f8>] (bus_for_each_dev+0x) [<c02008f8>] (bus_for_each_dev+0x68/0x90) from [<c0201064>] (bus_add_driver+0xa) [<c0201064>] (bus_add_driver+0xa4/0x23c) from [<c020275c>] (driver_register+0x7) [<c020275c>] (driver_register+0x78/0x12c) from [<c00087c0>] (do_one_initcall+0x) [<c00087c0>] (do_one_initcall+0x34/0x188) from [<c04b9310>] (kernel_init+0xe4/0) [<c04b9310>] (kernel_init+0xe4/0x1a8) from [<c0015bd8>] (kernel_thread_exit+0x0) ---[ end trace 1d550e891d03d7ce ]--- Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-06Input: ad7879 - add option to correct xy axisMichael Hennerich
Sebastian Zenker reported that driver swaps x and y samples when the touchscreen leads are connected in accordance with the datasheet specification. Transposed axis can be typically corrected by touch screen calibration however this bug also negatively influences touch pressure measurements. Add an option to correct x and y axis. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Reported-and-tested-by: Sebastian Zenker <sebastian.zenker@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-06Input: synaptics_usb - Remove TrackPoint name trailing whitespaceBob Ross
The USB TrackPoint name string contains a space at the trailing end that can cause confusion/difficulty when creating udev rules. Example: "Synaptics Inc. Composite TouchPad / TrackPoint (Stick) " This patch removes the trailing space. Signed-off-by: Bob Ross <pigiron@gmx.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-05Revert "Input: atmel_mxt_ts - warn if sysfs could not be created"Henrik Rydberg
Dmitry: I understand that I am a bit late to the party :) but I do not agree with this change. Failure to create attributes is not sometihng that user could cause (at least not easily) and thus would not be a setup issue but something more severe. I believe we should fail loading the driver so sysfs attribute breakage will be noticed as soon as possible, instead of discovering it much much later in the process. This reverts commit 639900380062ecd78ee8b265ea23929c565469b4. Requested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-07-05Input: MT - Include win8 supportHenrik Rydberg
The newly released HID protocol for win8 multitouch devices is capable of transmitting more information about each touch. In particular, it includes details useful for touch alignment. This patch completes the MT protocol with the ABS_MT_TOOL_X/Y events, and documents how to map win8 devices. Cc: Stephane Chatty <chatty@enac.fr> Cc: Benjamin Tissoires <benjamin.tissoires@enac.fr> Cc: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-07-04Merge commit 'v3.5-rc5' into nextDmitry Torokhov
2012-07-04Input: request threaded-only IRQs with IRQF_ONESHOTLars-Peter Clausen
Since commit 1c6c69525b ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. This patch adds the IRQF_ONESHOT to input drivers where it is missing. Not modified by this patch are those drivers where the requested IRQ will always be a nested IRQ (e.g. because it's part of an MFD), since for this special case IRQF_ONESHOT is not required to be specified when requesting the IRQ. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-06-30Linux 3.5-rc5Linus Torvalds
2012-06-30Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another week, another batch of fixes. All are small, contained, targeted fixes for explicit problems -- mostly build and boot failures across i.MX, OMAP, Renesas/Shmobile and Samsung." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx6q: fix suspend regression caused by common clk migration ARM: OMAP4470: Fix OMAP4470 boot failure ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n ARM: shmobile: r8a7779: Route all interrupts to ARM ARM: shmobile: kzm9d: use late init machine hook ARM: shmobile: kzm9g: use late init machine hook ARM: mach-shmobile: armadillo800eva: Use late init machine hook ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping ARM: mach-shmobile: add missing GPIO IRQ configuration on mackerel ARM: mach-shmobile: Fix build when SMP is enabled and EMEV2 is not enabled ARM: shmobile: sh7372: bugfix: chclr_offset base ARM: shmobile: sh73a0: bugfix: SY-DMAC number ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL
2012-06-30printk.c: fix kernel-doc warningsRandy Dunlap
Fix kernel-doc warnings in printk.c: use correct parameter name. Warning(kernel/printk.c:2429): No description found for parameter 'buf' Warning(kernel/printk.c:2429): Excess function parameter 'line' description in 'kmsg_dump_get_buffer' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-30linux/irq.h: fix kernel-doc warningRandy Dunlap
Fix kernel-doc warning. This struct member was removed in commit 875682648b89 ("irq: Remove irq_chip->release()") so remove its associated kernel-doc entry also. Warning(include/linux/irq.h:338): Excess struct/union/enum/typedef member 'release' description in 'irq_chip' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-30Merge branch 'v3.5-samsung-fixes-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.5-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL
2012-06-30ARM: imx6q: fix suspend regression caused by common clk migrationShawn Guo
When moving to common clk framework, the imx6q clks rom and mmdc_ch1_axi get different on/off states than old clk driver, which breaks suspend function. There might be a better way to manage these clocks, but let's takes the old clk driver approach to fix the regression first. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-30Merge tag 'omap-fixes-for-v3.5-rc4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: "Here's one more regression fix that I missed earlier, and a trivial fix to get omap4470 booting." * tag 'omap-fixes-for-v3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4470: Fix OMAP4470 boot failure ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n
2012-06-30Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & Power Management patches from Len Brown. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: acpi_pad: fix power_saving thread deadlock ACPI video: Still use ACPI backlight control if _DOS doesn't exist ACPI, APEI, Avoid too much error reporting in runtime ACPI: Add a quirk for "AMILO PRO V2030" to ignore the timer overriding ACPI: Remove one board specific WARN when ignoring timer overriding ACPI: Make acpi_skip_timer_override cover all source_irq==0 cases ACPI, x86: fix Dell M6600 ACPI reboot regression via DMI ACPI sysfs.c strlen fix
2012-06-30Merge tag 'driver-core-3.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver Core fixes from Greg Kroah-Hartman: "Here is a number of printk() fixes, specifically a few reported by the crazy blog program that ships in SUSE releases (that's "boot log" and not "web log", it predates the general "blog" terminology by many years), and the restoration of the continuation line functionality reported by Stephen and others. Yes, the changes seem a bit big this late in the cycle, but I've been beating on them for a while now, and Stephen has even optimized it a bit, so all looks good to me. The other change in here is a Documentation update for the stable kernel rules describing how some distro patches should be backported, to hopefully drive a bit more response from the distros to the stable kernel releases. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: printk: Optimize if statement logic where newline exists printk: flush continuation lines immediately to console syslog: fill buffer with more than a single message for SYSLOG_ACTION_READ Revert "printk: return -EINVAL if the message len is bigger than the buf size" printk: fix regression in SYSLOG_ACTION_CLEAR stable: Allow merging of backports for serious user-visible performance issues
2012-06-30Merge branches 'acpi_pad-bugzilla-42981', 'apei-bugzilla-43282', ↵Len Brown
'video-bugzilla-43168', 'bugzilla-40002' and 'bugfix-misc' into release bug fixes
2012-06-30acpi_pad: fix power_saving thread deadlockStuart Hayes
The acpi_pad driver can get stuck in destroy_power_saving_task() waiting for kthread_stop() to stop a power_saving thread. The problem is that the isolated_cpus_lock mutex is owned when destroy_power_saving_task() calls kthread_stop(), which waits for a power_saving thread to end, and the power_saving thread tries to acquire the isolated_cpus_lock when it calls round_robin_cpu(). This patch fixes the issue by making round_robin_cpu() use its own mutex. https://bugzilla.kernel.org/show_bug.cgi?id=42981 Cc: stable@vger.kernel.org Signed-off-by: Stuart Hayes <Stuart_Hayes@Dell.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-30ACPI video: Still use ACPI backlight control if _DOS doesn't existZhang Rui
This fixes a regression in 3.4-rc1 caused by commit ea9f8856bd6d4ed45885b06a338f7362cd6c60e5 (ACPI video: Harden video bus adding.) Some platforms don't have _DOS control method, but the ACPI backlight still works. We should not invoke _DOS for these platforms. https://bugzilla.kernel.org/show_bug.cgi?id=43168 Cc: Igor Murzov <intergalactic.anonymous@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-29Merge tag 'pm-for-3.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael J. Wysocki: * Fix for a bug in async suspend error code path causing parents to wait forever for their children in case of a suspend error from Mandeep Singh Baines (-stable metarial). * Fix for a suspend regression related to earlier changes in the ACPI cpuidle driver from Deepthi Dharwar. * tag 'pm-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup. PM / Sleep: Prevent waiting forever on asynchronous suspend after abort
2012-06-29printk: Optimize if statement logic where newline existsSteven Rostedt
In reviewing Kay's fix up patch: "printk: Have printk() never buffer its data", I found two if statements that could be combined and optimized. Put together the two 'cont.len && cont.owner == current' if statements into a single one, and check if we need to call cont_add(). This also removes the unneeded double cont_flush() calls. Link: http://lkml.kernel.org/r/1340869133.876.10.camel@mop Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-29Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "Here are a few powerpc fixes. Arguably some of this should have come to you earlier but I'm only just catching up after my medical leave. Mostly these fixes regressions, a couple are long standing bugs." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pseries: Fix software invalidate TCE powerpc: check_and_cede_processor() never cedes powerpc/ftrace: Do not trace restore_interrupts() powerpc: Fix Section mismatch warnings in prom_init.c ppc64: fix missing to check all bits of _TIF_USER_WORK_MASK in preempt powerpc: Fix uninitialised error in numa.c powerpc: Fix BPF_JIT code to link with multiple TOCs
2012-06-29Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cpufeature: Remove stray %s, add -w to mkcapflags.pl x86, cpufeature: Catch duplicate CPU feature strings x86, cpufeature: Rename X86_FEATURE_DTS to X86_FEATURE_DTHERM x86: Fix kernel-doc warnings x86, compat: Use test_thread_flag(TIF_IA32) in compat signal delivery
2012-06-29Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull oprofile fixlet from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: oprofile: perf: use NR_CPUS instead or nr_cpumask_bits for static array
2012-06-29Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU fix from Ingo Molnar. Fixes a bug introduced in this merge window by commit b1420f1c ("Make rcu_barrier() less disruptive") * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Stop rcu_do_batch() from multiplexing the "count" variable
2012-06-29printk: flush continuation lines immediately to consoleKay Sievers
Continuation lines are buffered internally, intended to merge the chunked printk()s into a single record, and to isolate potentially racy continuation users from usual terminated line users. This though, has the effect that partial lines are not printed to the console in the moment they are emitted. In case the kernel crashes in the meantime, the potentially interesting printed information would never reach the consoles. Here we share the continuation buffer with the console copy logic, and partial lines are always immediately flushed to the available consoles. They are still buffered internally to improve the readability and integrity of the messages and minimize the amount of needed record headers to store. Signed-off-by: Kay Sievers <kay@vrfy.org> Tested-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-29Input: atmel_mxt_ts - parse T6 reportsDaniel Kurtz
The normal messages sent after boot or NVRAM update are T6 reports, containing a status, and the config memory checksum. Parse them and dump a useful info message. This patch tested on an MXT224E. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-06-29Input: atmel_mxt_ts - send all MT-B slots in one input reportDaniel Kurtz
Each interrupt contains information for all contacts with changing properties. Process all of this information at once, and send it all in a a single input report (ie input events ending in EV_SYN/SYN_REPORT). This patch was tested using an MXT224E. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-06-29Input: atmel_mxt_ts - use T9 reportid range to init number of mt slotsDaniel Kurtz
Atmel mxt devices can report one finger for each T9 reportid. Therefore, this range can be used to report the max number of MT-B slots to userspace instead of assuming a fixed 10. Note that mxt_initialized() must complete early, since the input_dev properties now depend on values in the object table. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-06-29Input: atmel_mxt_ts - refactor reportid checking in mxt_interruptDaniel Kurtz
This small refactor is in preparation for checking more report types in the mxt_interrupt message processing loop. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-06-29Input: atmel_mxt_ts - cache T9 reportid range when reading object tableDaniel Kurtz
Streamline interrupt processing by caching the T9 reportid range when first reading the object table. In the process, refactor reading the object descriptor table. First, since the object_table entries are now exactly the same layout in device memory and in the driver, allocate an appropriately sized array and fetch the entire table directly into it in a single i2c transaction. Since a 6 byte table object requires 10 bytes to read, doing this dramatically reduces overhead. Note: The cached T9 reportid's are initialized to 0, which is an invalid reportid. Thus, the checks in the interrupt handler will always fail for devices that do not support the T9 object. Therefore, after doing a firmware update, the old object table is destroyed and all cached object values are reset to 0, before reading the new object table, in case the new firmware does not have the old objects. This patch tested on an MXT224E. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 06:04:13 +0000