summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-12-21[media] s5p-fimc: Add support for sensors with multiple padsAndrzej Hajda
Some sensors can have more than one pad (case of S5C73M3). In such cases FIMC assumes the last pad of the sensor is the source pad. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] fimc-lite: Add ISP FIFO output supportSylwester Nawrocki
Add second source media pad for the FIFO data output to FIMC-IS and implement subdev s_stream op for configurations where FIMC-LITE is used as a glue logic between FIMC-IS and MIPI-CSIS or an image sensor. The second source media pad will be linked to the FIMC-LITE video node. For proper configuration the attached image sensor/video encoder properties are needed, like video bus type, signal polarities, etc. For this purpose there is a small routine added that walks the pipeline and returns the sensor subdev. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] s5p-fimc: Add sensor group ids for fimc-isSylwester Nawrocki
Add subdev group id definition for FIMC-IS ISP and sensor subdev. While at it rename all group id definitions to start with GRP_ID. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] s5p-csis: Add registers logging for debuggingSylwester Nawrocki
Dump registers contents together with the event counters state in VIDIOC_LOG_STATUS ioctl. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] s5p-csis: Enable only data lanes that are actively usedSylwester Nawrocki
Enable only MIPI CSI-2 data lanes at the DPHY that are actively used, rather than unmasking all unconditionally. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] s5p-csis: Add support for raw Bayer pixel formatsSylwester Nawrocki
The MIPI CSIS device supports MIPI CSI-2 RAW8, RAW10, RAW12 data types. Add related media bus pixel format definitions. This doesn't cover all possible supported media bus pixel formats. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] s5p-fimc: Add variant data structure for Exynos4x12Sylwester Nawrocki
Add variant data structures for Exynos4212 and Exynos4412 SoC. Add 'const' qualifier for the variant description structures. Also remove has_cam_if flags from FIMC3 on Exynos4210 SoC is it has no interconnections the camera ports. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] s5p-fimc: Clean up capture enable/disable helpersSylwester Nawrocki
The FIMC FIFO output is not supported in the driver due to some hardware issues thus we can remove some code as out_path is always FIMC_IO_DMA. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] fimc-lite: Register dump function cleanupSylwester Nawrocki
Use v4l2_info() to make it possible to identify which FIMC-LITE device instance the logs refer to. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] V4L: DocBook: Add V4L2_MBUS_FMT_YUV10_1X30 media bus pixel codeSylwester Nawrocki
This patch adds definition of media bus code for YUV pixel format transferred in 30-bit samples where each component has 10 bits width. [mchehab@redhat.com: fix a merge conflict at v4l2-mediabus.h] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] s5p-csis: Correct the event counters loggingSylwester Nawrocki
The counter field is unsigned so >= 0 condition always evaluates to true. Fix this to log events for which counter is > 0 or for all when in debug mode. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] s5p-fimc: Fix horizontal/vertical image flipSylwester Nawrocki
Setting FIMC_REG_CITRGFMT_FLIP_X_MIRROR bit causes X-axis image flip (vertical flip) and thus it corresponds to V4L2_CID_VFLIP. Likewise, setting FIMC_REG_CITRGFMT_FLIP_Y_MIRROR bit causes Y-axis image flip (horizontal flip) and thus it corresponds to V4L2_CID_HFLIP. Currently the driver does X-axis flip when V4L2_CID_HFLIP is set and Y-axis flip for V4L2_CID_VFLIP. Fix this incorrect assignment by setting proper FIMC_REG_CITRGFMT register bits for ctx->hflip and ctx->vflip. Reported-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] v4l: There's no __unsignedSakari Ailus
Correct a typo. v4l2_plane.m.userptr is unsigned long, not __unsigned long. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] v4l: Tell user space we're using monotonic timestampsSakari Ailus
Set buffer timestamp flags for videobuf, videobuf2 and drivers that use neither. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] v4l: Convert drivers to use monotonic timestampsSakari Ailus
Convert drivers using wall clock time (CLOCK_REALTIME) to timestamp from the monotonic timer (CLOCK_MONOTONIC). Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] v4l: Helper function for obtaining timestampsSakari Ailus
v4l2_get_timestamp() produces a monotonic timestamp but unlike ktime_get_ts(), it uses struct timeval instead of struct timespec, saving the drivers the conversion job when getting timestamps for v4l2_buffer's timestamp field. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] v4l: Define video buffer flags for timestamp typesSakari Ailus
Define video buffer flags for different timestamp types. Everything up to now have used either realtime clock or monotonic clock, without a way to tell which clock the timestamp was taken from. Also document that the clock source of the timestamp in the timestamp field depends on buffer flags. [mchehab@redhat.com: fix a few wrong references to Kernel 3.8 - as this patch is meant for 3.9] Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] exynos-gsc: modify number of output/capture buffersShaik Ameer Basha
G-Scaler src buffer count as well as destination buffer count is increased to 32. This is required for G-Scaler to interface with MFC, as MFC demands 32 capture buffers for some H264 streams. Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] exynos-gsc: Use devm_clk_get()Sachin Kamat
devm_clk_get() is a device managed function and makes error handling a bit simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] exynos-gsc: Correct the clock handlingSylwester Nawrocki
Make sure there is no unbalanced clk_unprepare call and add missing clock release in the driver's remove() callback. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] exynos-gsc: Rearrange error messages for valid printsSachin Kamat
In case of clk_prepare failure, the function gsc_clk_get also prints "failed to get clock" which is not correct. Hence move the error messages to their respective blocks. While at it, also renamed the labels meaningfully. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] exynos-gsc: Fix checkpatch warning in gsc-m2m.cSachin Kamat
Fixes the following warning: WARNING: space prohibited between function name and open parenthesis '(' FILE: media/platform/exynos-gsc/gsc-m2m.c:606: ctx = kzalloc(sizeof (*ctx), GFP_KERNEL); Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] exynos-gsc: propagate timestamps from src to dst buffersShaik Ameer Basha
Make gsc-m2m propagate the timestamp field from source to destination buffers. Signed-off-by: John Sheu <sheu@google.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] exynos-gsc: Adding tiled multi-planar format to G-ScalerShaik Ameer Basha
Adding V4L2_PIX_FMT_NV12MT_16X16 to G-Scaler supported formats. If the output or input format is V4L2_PIX_FMT_NV12MT_16X16, configure G-Scaler to use GSC_IN_TILE_MODE. [s.nawrocki: shortened the pixel format description] Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-20[media] ivtv: ivtv-driver: Replace 'flush_work_sync()'Fabio Estevam
Since commit 43829731d (workqueue: deprecate flush[_delayed]_work_sync()), flush_work() should be used instead of flush_work_sync(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-20[media] tm6000-video.c: warning fixMauro Carvalho Chehab
drivers/media/usb/tm6000/tm6000-video.c: In function '__check_keep_urb': drivers/media/usb/tm6000/tm6000-video.c:1926:1: warning: return from incompatible pointer type [enabled by default] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-20[media] sh_veu.c: fix two compilation warningsMauro Carvalho Chehab
drivers/media/platform/sh_veu.c:269:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat] drivers/media/platform/sh_veu.c:276:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat] Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-20[media] media: mx2_camera: Add image size HW limitsJavier Martin
The CSI on i.MX27 has some constraints regarding image width. This patch makes sure those requirements are met in try_fmt(). Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> [g.liakhovetski@gmx.de: make constraint i.MX27-specific] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-20[media] MAINTAINERS: add entries for sh_veu and sh_vou V4L2 driversGuennadi Liakhovetski
sh_vou might be better described by "Odd Fixes," but mark it "Maintained" for now. sh_veu is a new driver and might see some development in the future. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-20[media] sh_mobile_ceu_camera: use managed memory and resource allocationsGuennadi Liakhovetski
Use managed allocations to simplify error handling and clean up paths. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-20[media] media: sh_mobile_csi2: use managed memory and resource allocationsGuennadi Liakhovetski
Use managed allocations to simplify error handling and clean up paths. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-20[media] media: soc-camera: remove superfluous JPEG checkingGuennadi Liakhovetski
Explicit checks for the JPEG pixel format in soc_mbus_bytes_per_line() and soc_mbus_image_size() are superfluous, because also without them these functions will perform correctly. The former will return 0 based on packing == SOC_MBUS_PACKING_VARIABLE and the latter will simply multiply the user-provided line length by the image height to obtain a frame buffer size estimate. The original version of the "media: soc_camera: don't clear pix->sizeimage in JPEG mode" patch was correct and my amendment, adding these two checks was superfluous. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-20[media] media: soc-camera: update documentationGuennadi Liakhovetski
Update soc-camera documentation to reflect the current camera host API and the use of the common V4L2 subdev API. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-20[media] media: sh-mobile-ceu-camera: runtime PM suspending doesn't have to ↵Guennadi Liakhovetski
be synchronous In both error and clean up cases there is no need to wait for runtime PM to finish suspending the device. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-20[media] media: soc-camera: use managed devm_regulator_bulk_get()Guennadi Liakhovetski
Using device-managed devm_regulator_bulk_get() eliminates the need to release regulators explicitly. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-20[media] media: add a VEU MEM2MEM format conversion and scaling driverGuennadi Liakhovetski
Video Engine Unit (VEU) is an IP block, found in multiple SuperH and ARM- based sh-mobile and r-mobile SoCs, capable of processing video data. It can perform colour-space conversion, scaling and several filtering transformations. This patch adds an initial implementation of a mem2mem V4L2 driver for VEU. So far only conversion from NV12 to RGB565 is supported. Further functionality shall be added in the future. This driver is based on a VEU vidix driver by Magnus Damm. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-19[media] media: mem2mem: make reference to struct m2m_ops in the core constGuennadi Liakhovetski
The mem2mem core doesn't change struct m2m_ops, provided by the driver, make references to it const. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-19[media] omap_vout: Use the output overlay ioctl operationsLaurent Pinchart
The omap_vout device implements the output overlay API, use the corresponding ioctl operations. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-19[media] omap_vout: Drop overlay format enumerationLaurent Pinchart
Enumerating formats for output overlays doesn't make sense, as the pixel format is defined by the display API, not the V4L2 API. Drop the vidioc_enum_fmt_vid_overlay ioctl operation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-19[media] v4l2: add new pixel formats supported on dm365Manjunath Hadli
add new macro V4L2_PIX_FMT_SGRBG10ALAW8 and associated formats to represent Bayer format frames compressed by A-LAW algorithm, add V4L2_PIX_FMT_UV8 to represent storage of CbCr data (UV interleaved) only. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-19[media] DocBook: fix an index referenceMauro Carvalho Chehab
Error: no ID for constraint linkend: V4L2-PIX-FMT-NV12MT-16X16. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-19[media] media: add new mediabus format enums for dm365Manjunath Hadli
add new enum entries for supporting the media-bus formats on dm365. These include some bayer and some non-bayer formats. V4L2_MBUS_FMT_YDYUYDYV8_1X16 and V4L2_MBUS_FMT_UV8_1X8 are used internal to the hardware by the resizer. V4L2_MBUS_FMT_SBGGR10_ALAW8_1X8 represents the bayer ALAW format that is supported by dm365 hardware. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-18[media] Documentation: fix outdated statement re. v4l2Nicolas THERY
Fix tense used for describing struct v4l2_fh as it has been added a while ago. Signed-off-by: Nicolas Thery <nicolas.thery@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-18[media] MAINTAINERS: fix drivers/media/usb/dvb-usb/cxusb*Cesar Eduardo Barros
This driver was never at dvb-usb-v2, as far as I could see. Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-18[media] MAINTAINERS: fix drivers/media/platform/atmel-isi.cCesar Eduardo Barros
This file was moved to drivers/media/platform/soc_camera/atmel-isi.c by commit b47ff4a ([media] move soc_camera to its own directory). Cc: Josh Wu <josh.wu@atmel.com> Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-18[media] MAINTAINERS: add entry for dsbr100 usb radio driverAlexey Klimov
This patch adds MAINTAINERS entry for dsbr100 usb radio driver. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-18[media] MAINTAINERS: add g2d entryKamil Debski
Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-18[media] MAINTAINERS: add entry for radio-ma901 driverAlexey Klimov
This patch adds MAINTAINERS entry for radio-ma901 usb radio driver. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-18[media] tda18271: add missing entries for qam_7 to tda18271_update_std_map() ↵Frank Schäfer
and tda18271_dump_std_map() Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-18[media] cx23885: add basic DVB-S2 support for Hauppauge HVR-4400Michael Krufky
Add basic DVB-S2 support for the Hauppauge HVR-4400 PCIe board. Thanks to Antti Palosaari and Devin Heitmueller for their suggestions and testing. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 14:58:12 +0000