summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-16Revert "nohz: Fix collision between tick and other hrtimers"Linus Torvalds
This reverts commit 24b91e360ef521a2808771633d76ebc68bd5604b and commit 7bdb59f1ad47 ("tick/nohz: Fix possible missing clock reprog after tick soft restart") that depends on it, Pavel reports that it causes occasional boot hangs for him that seem to depend on just how the machine was booted. In particular, his machine hangs at around the PCI fixups of the EHCI USB host controller, but only hangs from cold boot, not from a warm boot. Thomas Gleixner suspecs it's a CPU hotplug interaction, particularly since Pavel also saw suspend/resume issues that seem to be related. We're reverting for now while trying to figure out the root cause. Reported-bisected-and-tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org # reverted commits were marked for stable Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-16cxgb4: Remove redundant code in t4_uld_clean_up()Ganesh Goudar
Remove variable rxq_info and also remove redundant assignment to it. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16cxgb4: Add new T5 and T6 pci device id'sGanesh Goudar
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16cxgb4: Increase max number of tc u32 linksArjun V
Make max number of supported tc u32 links equal to max number of filters supported by hardware. Signed-off-by: Arjun V <arjun@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16Merge tag 'media/v4.10-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fix from Mauro Carvalho Chehab: "A regression fix that makes the Siano driver to work again after the CONFIG_VMAP_STACK change" * tag 'media/v4.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] siano: make it work again with CONFIG_VMAP_STACK
2017-02-16vfs: fix uninitialized flags in splice_to_pipe()Miklos Szeredi
Flags (PIPE_BUF_FLAG_PACKET, PIPE_BUF_FLAG_GIFT) could remain on the unused part of the pipe ring buffer. Previously splice_to_pipe() left the flags value alone, which could result in incorrect behavior. Uninitialized flags appears to have been there from the introduction of the splice syscall. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> # 2.6.17+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: "Fix a use after free bug introduced in 4.2 and using an uninitialized value introduced in 4.9" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix uninitialized flags in pipe_buffer fuse: fix use after free issue in fuse_dev_do_read()
2017-02-16Merge tag 'pci-v4.10-fixes-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Add back pcie_pme_remove() so we free the IRQ when removing PCIe port devices; previously the leaked IRQ caused an MSI BUG_ON" * tag 'pci-v4.10-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/PME: Restore pcie_pme_driver.remove
2017-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) In order to avoid problems in the future, make cgroup bpf overriding explicit using BPF_F_ALLOW_OVERRIDE. From Alexei Staovoitov. 2) LLC sets skb->sk without proper skb->destructor and this explodes, fix from Eric Dumazet. 3) Make sure when we have an ipv4 mapped source address, the destination is either also an ipv4 mapped address or ipv6_addr_any(). Fix from Jonathan T. Leighton. 4) Avoid packet loss in fec driver by programming the multicast filter more intelligently. From Rui Sousa. 5) Handle multiple threads invoking fanout_add(), fix from Eric Dumazet. 6) Since we can invoke the TCP input path in process context, without BH being disabled, we have to accomodate that in the locking of the TCP probe. Also from Eric Dumazet. 7) Fix erroneous emission of NETEVENT_DELAY_PROBE_TIME_UPDATE when we aren't even updating that sysctl value. From Marcus Huewe. 8) Fix endian bugs in ibmvnic driver, from Thomas Falcon. [ This is the second version of the pull that reverts the nested rhashtable changes that looked a bit too scary for this late in the release - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) rhashtable: Revert nested table changes. ibmvnic: Fix endian errors in error reporting output ibmvnic: Fix endian error when requesting device capabilities net: neigh: Fix netevent NETEVENT_DELAY_PROBE_TIME_UPDATE notification net: xilinx_emaclite: fix freezes due to unordered I/O net: xilinx_emaclite: fix receive buffer overflow bpf: kernel header files need to be copied into the tools directory tcp: tcp_probe: use spin_lock_bh() uapi: fix linux/if_pppol2tp.h userspace compilation errors packet: fix races in fanout_add() ibmvnic: Fix initial MTU settings net: ethernet: ti: cpsw: fix cpsw assignment in resume kcm: fix a null pointer dereference in kcm_sendmsg() net: fec: fix multicast filtering hardware setup ipv6: Handle IPv4-mapped src to in6addr_any dst. ipv6: Inhibit IPv4-mapped src address on the wire. net/mlx5e: Disable preemption when doing TC statistics upcall rhashtable: Add nested tables tipc: Fix tipc_sk_reinit race conditions gfs2: Use rhashtable walk interface in glock_hash_walk ...
2017-02-16drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursorMichel Dänzer
The crtc_h/vdisplay fields may not match the CRTC viewport dimensions with special modes such as interlaced ones. Fixes the HW cursor disappearing in the bottom half of the screen with interlaced modes. Fixes: 6b16cf7785a4 ("drm/radeon: Hide the HW cursor while it's out of bounds") Cc: stable@vger.kernel.org Reported-by: Ashutosh Kumar <ashutosh.kumar@amd.com> Tested-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-02-16ARM: 8658/1: uaccess: fix zeroing of 64-bit get_user()Kees Cook
The 64-bit get_user() wasn't clearing the high word due to a typo in the error handler. The exception handler entry was already correct, though. Noticed during recent usercopy test additions in lib/test_user_copy.c. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-02-16ARM: 8657/1: uaccess: consistently check object sizesKees Cook
In commit 76624175dcae ("arm64: uaccess: consistently check object sizes"), the object size checks are moved outside the access_ok() so that bad destinations are detected before hitting the "memset(dest, 0, size)" in the copy_from_user() failure path. This makes the same change for arm, with attention given to possibly extracting the uaccess routines into a common header file for all architectures in the future. Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-02-16cfq-iosched: don't call wbt_disable_default() with IRQs disabledJens Axboe
wbt_disable_default() calls del_timer_sync() to wait for the wbt timer to finish before disabling throttling. We can't do this with IRQs disable. This fixes a lockdep splat on boot, if non-root cgroups are used. Reported-by: Gabriel C <nix.or.die@gmail.com> Fixes: 87760e5eef35 ("block: hook up writeback throttling") Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-16fuse: fix uninitialized flags in pipe_bufferMiklos Szeredi
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: d82718e348fe ("fuse_dev_splice_read(): switch to add_to_pipe()") Cc: <stable@vger.kernel.org> # 4.9+
2017-02-16ixgbe: Don't bother clearing buffer memory for descriptor ringsAlexander Duyck
This patch makes it so that we don't need to bother with clearing the memory out for the descriptor rings. The general idea is to only free buffers associated with buffers in use which are located between the next_to_clean and next_to_use or next_to_alloc values. Everything outside of those regions can be safely ignored since they should have no buffers associated with them. The advantage to doing things this way is that is should speed up bring-up and tear-down of the rings. Specifically we can avoid the 512 or more cycles required to memset the rings in tear-down. In the bring-up phase we then clear the memory as a part of initialization. The general idea is that the clearing in initialization can act as a prefetch of sorts for the buffer info structures so they are in the local CPU when we go to populate them. This should help to improve overall time needed to perform a suspend/resume. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Add support for build_skbAlexander Duyck
This patch adds build_skb support to the Rx path. There are several advantages to this change. 1. It avoids the memcpy and skb->head allocation for small packets which improves performance by about 5% in my tests. 2. It avoids the memcpy, skb->head allocation, and eth_get_headlen for larger packets improving performance by about 10% in my tests. 3. For VXLAN packets it allows the full header to be in skb->data which improves the performance by as much as 30% in some of my tests. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Add private flag to control buffer modeAlexander Duyck
Since there are potential drawbacks to the new Rx allocation approach I thought it best to add a "chicken bit" so that we can turn the feature off if in the event that a problem is found. It also provides a means of validating the legacy Rx path in the event that we are forced to fall back. At some point in the future when we are convinced we don't need it anymore we might be able to drop the legacy-rx flag. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Add support for padding packetAlexander Duyck
This patch adds support for providing a buffer with headroom and tailroom to allow for shared info, NET_SKB_PAD, and NET_IP_ALIGN. With this combined with the DMA changes we can start using build_skb to build frames around an incoming Rx buffer instead of having to memcpy the headers. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Break out Rx buffer page managementAlexander Duyck
We are going to be expanding the number of Rx paths in the driver. Instead of duplicating all that code I am pulling it apart into separate functions so that we don't have so much code duplication. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Use length to determine if descriptor is doneAlexander Duyck
This change makes it so that we use the length of the packet instead of the DD status bit to determine if a new descriptor is ready to be processed. The obvious advantage is that it cuts down on reads as we don't really even need the DD bit if going from a 0 to a non-zero value on size is enough to inform us that the packet has been completed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Make use of order 1 pages and 3K buffers independent of FCoEAlexander Duyck
In order to support build_skb with jumbo frames it will be necessary to use 3K buffers for the Rx path with 8K pages backing them. This is needed on architectures that implement 4K pages because we can't support 2K buffers plus padding in a 4K page. In the case of systems that support page sizes larger than 4K the 3K attribute will only be applied to FCoE as we can fall back to using just 2K buffers and adding the padding. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Update code to better handle incrementing page countAlexander Duyck
Batch the page count updates instead of doing them one at a time. By doing this we can improve the overall performance as the atomic increment operations can be expensive due to the fact that on x86 they are locked operations which can cause stalls. By doing bulk updates we can consolidate the stall which should help to improve the overall receive performance. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Update driver to make use of DMA attributes in Rx pathAlexander Duyck
This patch adds support for DMA_ATTR_SKIP_CPU_SYNC and DMA_ATTR_WEAK_ORDERING. By enabling both of these for the Rx path we are able to see performance improvements on architectures that implement either one due to the fact that page mapping and unmapping only has to sync what is actually being used instead of the entire buffer. In addition by enabling the weak ordering attribute enables a performance improvement for architectures that can associate a memory ordering with a DMA buffer such as Sparc. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Only DMA sync frame lengthAlexander Duyck
On some platforms, syncing a buffer for DMA is expensive. Rather than sync the whole 2K receive buffer, only synchronise the length of the frame, which will typically be the MTU, or a much smaller TCP ACK. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Add function for checking to see if we can reuse pageAlexander Duyck
This patch consolidates the code for the ixgbe driver so that it is more inline with what is already in igb. The general idea is to just consolidate functions that represent logical steps in the Rx process so we can later update them more easily. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Update version to reflect added functionalityMark Rustad
Update the driver version to reflect the new devices that it supports. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: prefix Data Center Bridge ops structStephen Hemminger
Since dcbnl_ops is global, it should be prefixed by ixgbe_ Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Support 2.5Gb and 5Gb speedTony Nguyen
Though not advertised through ethtool, if the link partner advertises a 2.5Gb or 5Gb connection, and the adapter supports it, allow the speed to be used. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-15rhashtable: Revert nested table changes.David S. Miller
This reverts commits: 6a25478077d987edc5e2f880590a2bc5fcab4441 9dbbfb0ab6680c6a85609041011484e6658e7d3c 40137906c5f55c252194ef5834130383e639536f It's too risky to put in this late in the release cycle. We'll put these changes into the next merge window instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16Merge tag 'drm-misc-fixes-2017-02-15' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-fixes dp/mst oops fix for v4.10 * tag 'drm-misc-fixes-2017-02-15' of git://anongit.freedesktop.org/git/drm-misc: drm/dp/mst: fix kernel oops when turning off secondary monitor
2017-02-16powerpc/64: Disable use of radix under a hypervisorPaul Mackerras
Currently, if the kernel is running on a POWER9 processor under a hypervisor, it may try to use the radix MMU even though it doesn't have the necessary code to do so (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). If the hypervisor supports both radix and HPT, then it will set up the guest to use HPT (since the guest doesn't request radix in the CAS call), but if the radix feature bit is set in the ibm,pa-features property (which is valid, since ibm,pa-features is defined to represent the capabilities of the processor) the guest will try to use radix, resulting in a crash when it turns the MMU on. This makes the minimal fix for the current code, which is to disable radix unless we are running in hypervisor mode. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15ibmvnic: Fix endian errors in error reporting outputThomas Falcon
Error reports received from firmware were not being converted from big endian values, leading to bogus error codes reported on little endian systems. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15ibmvnic: Fix endian error when requesting device capabilitiesThomas Falcon
When a vNIC client driver requests a faulty device setting, the server returns an acceptable value for the client to request. This 64 bit value was incorrectly being swapped as a 32 bit value, resulting in loss of data. This patch corrects that by using the 64 bit swap function. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15atm: idt77252, use setup_timer and mod_timerJan Koniarik
Stop accessing timer struct members directly and use setup_timer and mod_timer helpers intended for that use. It makes the code cleaner and will allow for easier change of the timer struct internals. Signed-off-by: Jan Koniarik <jan.koniarik@trustica.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Chas Williams <3chas3@gmail.com> Cc: <linux-atm-general@lists.sourceforge.net> Cc: <netdev@vger.kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15mlxsw: acl: Use PBS type for forward actionJiri Pirko
Current behaviour of "mirred redirect" action (forward) offload is a bit odd. For matched packets the action forwards them to the desired destination, but it also lets the packet duplicates to go the original way down (bridge, router, etc). That is more like "mirred mirror". Fix this by using PBS type which behaves exactly like "mirred redirect". Note that PBS does not support loopback mode. Fixes: 4cda7d8d7098 ("mlxsw: core: Introduce flexible actions support") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15Merge branch 'stmmac-misc'David S. Miller
Corentin Labbe says: ==================== stmmac: misc patchs This is a follow up of my previous stmmac serie which address some comment done in v2. ==================== Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: invert the logic for dumping regsLABBE Corentin
It is easier to follow the logic by removing the not operator Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: reduce indentation by adding a continueLABBE Corentin
As suggested by Joe Perches, replacing the "if phydev" logic permit to reduce indentation in the for loop. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: split the stmmac_adjust_link 10/100 caseLABBE Corentin
The 10/100 case have too many ifcase. This patch split it for removing an if. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: run stmmac_hw_fix_mac_speed when speed is validLABBE Corentin
This patch mutualise a bit by running stmmac_hw_fix_mac_speed() after the switch in case of valid speed. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: set speed at SPEED_UNKNOWN in case of broken speedLABBE Corentin
In case of invalid speed given, stmmac_adjust_link() still record it as current speed. This patch modify the default case to set speed as SPEED_UNKNOWN if not 10/100/1000. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: use SPEED_UNKNOWN/DUPLEX_UNKNOWNLABBE Corentin
It is better to use DUPLEX_UNKNOWN instead of just "-1". Using 0 for an invalid speed is bad since 0 is a valid value for speed. So this patch replace 0 by SPEED_UNKNOWN. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: likely is useless in occasional functionLABBE Corentin
The stmmac_adjust_link() function is called too rarely for having likely() macros being useful. Just remove likely annotation in it. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: remove useless parenthesisLABBE Corentin
This patch remove some useless parenthesis. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: ethernet: aquantia: switch to pci_alloc_irq_vectorsChristoph Hellwig
pci_enable_msix has been long deprecated, but this driver adds a new instance. Convert it to pci_alloc_irq_vectors so that no new instance of the deprecated function reaches mainline. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15Merge branch 'qed-ptp'David S. Miller
Yuval Mintz says: ==================== qed*: Add support for PTP This patch series adds required changes for qed/qede drivers for supporting the IEEE Precision Time Protocol (PTP). Changes from previous versions: v7: Fixed Kbuild robot warnings. v6: Corrected broken loop iteration in previous version. Reduced approximation error of adjfreq. v5: Removed two divisions from the adjust-frequency loop. Resulting logic would use 8 divisions [instead of 24]. v4: Remove the loop iteration for value '0' in the qed_ptp_hw_adjfreq() implementation. v3: Use div_s64 for 64-bit divisions as do_div gives error for signed types. Incorporated review comments from Richard Cochran. - Clear timestamp resgisters as soon as timestamp is read. - Use shift operation in the place of 'divide by 16'. v2: Use do_div for 64-bit divisions. ==================== Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15qede: Add driver support for PTPSudarsana Reddy Kalluru
This patch adds the driver support for, - Registering the ptp clock functionality with the OS. - Timestamping the Rx/Tx PTP packets. - Ethtool callbacks related to PTP. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15qed: Add infrastructure for PTP supportSudarsana Reddy Kalluru
The patch adds the required qed interfaces for configuring/reading the PTP clock on the adapter. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15cxgb4: Update proper netdev stats for rx dropsGanesh Goudar
Count buffer group drops or truncates as rx drops rather than rx errors in netdev stats. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: Arjun V <arjun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15openvswitch: Set internal device max mtu to ETH_MAX_MTU.Jarno Rajahalme
Commit 91572088e3fd ("net: use core MTU range checking in core net infra") changed the openvswitch internal device to use the core net infra for controlling the MTU range, but failed to actually set the max_mtu as described in the commit message, which now defaults to ETH_DATA_LEN. This patch fixes this by setting max_mtu to ETH_MAX_MTU after ether_setup() call. Fixes: 91572088e3fd ("net: use core MTU range checking in core net infra") Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 11:36:12 +0000