summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-10ibmvnic: Enable GROThomas Falcon
Enable Generic Receive Offload in the ibmvnic driver. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10Merge branch 'mlxsw-Various-fixes'David S. Miller
Ido Schimmel says: ==================== mlxsw: Various fixes This patchset contains various small fixes for mlxsw. Patch #1 fixes a warning generated by switchdev core when the driver fails to insert an MDB entry in the commit phase. Patches #2-#4 fix a warning in check_flush_dependency() that can be triggered when a work item in a WQ_MEM_RECLAIM workqueue tries to flush a non-WQ_MEM_RECLAIM workqueue. It seems that the semantics of the WQ_MEM_RECLAIM flag are not very clear [1] and that various patches have been sent to remove it from various workqueues throughout the kernel [2][3][4] in order to silence the warning. These patches do the same for the workqueues created by mlxsw that probably should not have been created with this flag in the first place. Patch #5 fixes a regression where an IP address cannot be assigned to a VRF upper due to erroneous MAC validation check. Patch #6 adds a test case. Patch #7 adjusts Spectrum-2 shared buffer configuration to be compatible with Spectrum-1. The problem and fix are described in detail in the commit message. Please consider patches #1-#5 for 5.0.y. I verified they apply cleanly. [1] https://patchwork.kernel.org/patch/10791315/ [2] Commit ce162bfbc0b6 ("mac80211_hwsim: don't use WQ_MEM_RECLAIM") [3] Commit 39baf10310e6 ("IB/core: Fix use workqueue without WQ_MEM_RECLAIM") [4] Commit 75215e5bb22c ("iwcm: Don't allocate iwcm workqueue with WQ_MEM_RECLAIM") ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10mlxsw: spectrum_buffers: Add a multicast pool for Spectrum-2Ido Schimmel
In Spectrum-1, when a multicast packet is admitted to the shared buffer it increases the quotas of all the ports and {port, TC} to which it is forwarded to. The above means that multicast packets are accounted multiple times in the shared buffer and can therefore cause the associated shared buffer pool to fill up very quickly. To work around this issue, commit e83c045e53d7 ("mlxsw: spectrum_buffers: Configure MC pool") added a dedicated multicast pool in which multicast packets are accounted. The issue is not present in Spectrum-2, but in order to be backward compatible with Spectrum-1, its default behavior is to allow a multicast packet to increase multiple egress quotas instead of one. Until the new (non-backward compatible) mode is supported, configure a dedicated multicast pool as in Spectrum-1. Fixes: fe099bf682ab ("mlxsw: spectrum_buffers: Add Spectrum-2 shared buffer configuration") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10selftests: mlxsw: Test VRF MAC vetoingIdo Schimmel
Test that it is possible to set an IP address on a VRF and that it is not vetoed. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10mlxsw: spectrum_router: Do not check VRF MAC addressIdo Schimmel
Commit 74bc99397438 ("mlxsw: spectrum_router: Veto unsupported RIF MAC addresses") enabled the driver to veto router interface (RIF) MAC addresses that it cannot support. This check should only be performed for interfaces for which the driver actually configures a RIF. A VRF upper is not one of them, so ignore it. Without this patch it is not possible to set an IP address on the VRF device and use it as a loopback. Fixes: 74bc99397438 ("mlxsw: spectrum_router: Veto unsupported RIF MAC addresses") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Tested-by: Alexander Petrovskiy <alexpe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10mlxsw: core: Do not use WQ_MEM_RECLAIM for mlxsw workqueueIdo Schimmel
The workqueue is used to periodically update the networking stack about activity / statistics of various objects such as neighbours and TC actions. It should not be called as part of memory reclaim path, so remove the WQ_MEM_RECLAIM flag. Fixes: 3d5479e92087 ("mlxsw: core: Remove deprecated create_workqueue") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10mlxsw: core: Do not use WQ_MEM_RECLAIM for mlxsw ordered workqueueIdo Schimmel
The ordered workqueue is used to offload various objects such as routes and neighbours in the order they are notified. It should not be called as part of memory reclaim path, so remove the WQ_MEM_RECLAIM flag. This can also result in a warning [1], if a worker tries to flush a non-WQ_MEM_RECLAIM workqueue. [1] [97703.542861] workqueue: WQ_MEM_RECLAIM mlxsw_core_ordered:mlxsw_sp_router_fib6_event_work [mlxsw_spectrum] is flushing !WQ_MEM_RECLAIM events:rht_deferred_worker [97703.542884] WARNING: CPU: 1 PID: 32492 at kernel/workqueue.c:2605 check_flush_dependency+0xb5/0x130 ... [97703.542988] Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018 [97703.543049] Workqueue: mlxsw_core_ordered mlxsw_sp_router_fib6_event_work [mlxsw_spectrum] [97703.543061] RIP: 0010:check_flush_dependency+0xb5/0x130 ... [97703.543071] RSP: 0018:ffffb3f08137bc00 EFLAGS: 00010086 [97703.543076] RAX: 0000000000000000 RBX: ffff96e07740ae00 RCX: 0000000000000000 [97703.543080] RDX: 0000000000000094 RSI: ffffffff82dc1934 RDI: 0000000000000046 [97703.543084] RBP: ffffb3f08137bc20 R08: ffffffff82dc18a0 R09: 00000000000225c0 [97703.543087] R10: 0000000000000000 R11: 0000000000007eec R12: ffffffff816e4ee0 [97703.543091] R13: ffff96e06f6a5c00 R14: ffff96e077ba7700 R15: ffffffff812ab0c0 [97703.543097] FS: 0000000000000000(0000) GS:ffff96e077a80000(0000) knlGS:0000000000000000 [97703.543101] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [97703.543104] CR2: 00007f8cd135b280 CR3: 00000001e860e003 CR4: 00000000003606e0 [97703.543109] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [97703.543112] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [97703.543115] Call Trace: [97703.543129] __flush_work+0xbd/0x1e0 [97703.543137] ? __cancel_work_timer+0x136/0x1b0 [97703.543145] ? pwq_dec_nr_in_flight+0x49/0xa0 [97703.543154] __cancel_work_timer+0x136/0x1b0 [97703.543175] ? mlxsw_reg_trans_bulk_wait+0x145/0x400 [mlxsw_core] [97703.543184] cancel_work_sync+0x10/0x20 [97703.543191] rhashtable_free_and_destroy+0x23/0x140 [97703.543198] rhashtable_destroy+0xd/0x10 [97703.543254] mlxsw_sp_fib_destroy+0xb1/0xf0 [mlxsw_spectrum] [97703.543310] mlxsw_sp_vr_put+0xa8/0xc0 [mlxsw_spectrum] [97703.543364] mlxsw_sp_fib_node_put+0xbf/0x140 [mlxsw_spectrum] [97703.543418] ? mlxsw_sp_fib6_entry_destroy+0xe8/0x110 [mlxsw_spectrum] [97703.543475] mlxsw_sp_router_fib6_event_work+0x6cd/0x7f0 [mlxsw_spectrum] [97703.543484] process_one_work+0x1fd/0x400 [97703.543493] worker_thread+0x34/0x410 [97703.543500] kthread+0x121/0x140 [97703.543507] ? process_one_work+0x400/0x400 [97703.543512] ? kthread_park+0x90/0x90 [97703.543523] ret_from_fork+0x35/0x40 Fixes: a3832b31898f ("mlxsw: core: Create an ordered workqueue for FIB offload") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Semion Lisyansky <semionl@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10mlxsw: core: Do not use WQ_MEM_RECLAIM for EMAD workqueueIdo Schimmel
The EMAD workqueue is used to handle retransmission of EMAD packets that contain configuration data for the device's firmware. Given the workers need to allocate these packets and that the code is not called as part of memory reclaim path, remove the WQ_MEM_RECLAIM flag. Fixes: d965465b60ba ("mlxsw: core: Fix possible deadlock") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10mlxsw: spectrum_switchdev: Add MDB entries in prepare phaseIdo Schimmel
The driver cannot guarantee in the prepare phase that it will be able to write an MDB entry to the device. In case the driver returned success during the prepare phase, but then failed to add the entry in the commit phase, a WARNING [1] will be generated by the switchdev core. Fix this by doing the work in the prepare phase instead. [1] [ 358.544486] swp12s0: Commit of object (id=2) failed. [ 358.550061] WARNING: CPU: 0 PID: 30 at net/switchdev/switchdev.c:281 switchdev_port_obj_add_now+0x9b/0xe0 [ 358.560754] CPU: 0 PID: 30 Comm: kworker/0:1 Not tainted 5.0.0-custom-13382-gf2449babf221 #1350 [ 358.570472] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016 [ 358.580582] Workqueue: events switchdev_deferred_process_work [ 358.587001] RIP: 0010:switchdev_port_obj_add_now+0x9b/0xe0 ... [ 358.614109] RSP: 0018:ffffa6b900d6fe18 EFLAGS: 00010286 [ 358.619943] RAX: 0000000000000000 RBX: ffff8b00797ff000 RCX: 0000000000000000 [ 358.627912] RDX: ffff8b00b7a1d4c0 RSI: ffff8b00b7a152e8 RDI: ffff8b00b7a152e8 [ 358.635881] RBP: ffff8b005c3f5bc0 R08: 000000000000022b R09: 0000000000000000 [ 358.643850] R10: 0000000000000000 R11: ffffa6b900d6fcc8 R12: 0000000000000000 [ 358.651819] R13: dead000000000100 R14: ffff8b00b65a23c0 R15: 0ffff8b00b7a2200 [ 358.659790] FS: 0000000000000000(0000) GS:ffff8b00b7a00000(0000) knlGS:0000000000000000 [ 358.668820] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 358.675228] CR2: 00007f00aad90de0 CR3: 00000001ca80d000 CR4: 00000000001006f0 [ 358.683188] Call Trace: [ 358.685918] switchdev_port_obj_add_deferred+0x13/0x60 [ 358.691655] switchdev_deferred_process+0x6b/0xf0 [ 358.696907] switchdev_deferred_process_work+0xa/0x10 [ 358.702548] process_one_work+0x1f5/0x3f0 [ 358.707022] worker_thread+0x28/0x3c0 [ 358.711099] ? process_one_work+0x3f0/0x3f0 [ 358.715768] kthread+0x10d/0x130 [ 358.719369] ? __kthread_create_on_node+0x180/0x180 [ 358.724815] ret_from_fork+0x35/0x40 Fixes: 3a49b4fde2a1 ("mlxsw: Adding layer 2 multicast support") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alex Kushnarov <alexanderk@mellanox.com> Tested-by: Alex Kushnarov <alexanderk@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09Merge tag 'mac80211-for-davem-2019-04-09' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes: * iTXQ fixes from Felix * tracing fix - increase message length * fix SW_CRYPTO_CONTROL enforcement * WMM rule handling for regdomain intersection * max_interfaces in hwsim - reported by syzbot * clear private data in some more commands * a clang compiler warning fix I added a patch with two new (unused) macros for rate-limited printing to simplify getting the users into the tree. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09mac80211: Honor SW_CRYPTO_CONTROL for unicast keys in AP VLAN modeAlexander Wetzel
Restore SW_CRYPTO_CONTROL operation on AP_VLAN interfaces for unicast keys, the original override was intended to be done for group keys as those are treated specially by mac80211 and would always have been rejected. Now the situation is that AP_VLAN support must be enabled by the driver if it can support it (meaning it can support software crypto GTK TX). Thus, also simplify the code - if we get here with AP_VLAN and non- pairwise key, software crypto must be used (driver doesn't know about the interface) and can be used (driver must've advertised AP_VLAN if it also uses SW_CRYPTO_CONTROL). Fixes: db3bdcb9c3ff ("mac80211: allow AP_VLAN operation on crypto controlled devices") Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Off by one and bounds checking fixes in NFC, from Dan Carpenter. 2) There have been many weird regressions in r8169 since we turned ASPM support on, some are still not understood nor completely resolved. Let's turn this back off for now. From Heiner Kallweit. 3) Signess fixes for ethtool speed value handling, from Michael Zhivich. 4) Handle timestamps properly in macb driver, from Paul Thomas. 5) Two erspan fixes, it's the usual "skb ->data potentially reallocated and we're holding a stale protocol header pointer". From Lorenzo Bianconi. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: bnxt_en: Reset device on RX buffer errors. bnxt_en: Improve RX consumer index validity check. net: macb driver, check for SKBTX_HW_TSTAMP qlogic: qlcnic: fix use of SPEED_UNKNOWN ethtool constant broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constant ethtool: avoid signed-unsigned comparison in ethtool_validate_speed() net: ip6_gre: fix possible use-after-free in ip6erspan_rcv net: ip_gre: fix possible use-after-free in erspan_rcv r8169: disable ASPM again MAINTAINERS: ieee802154: update documentation file pattern net: vrf: Fix ping failed when vrf mtu is set to 0 selftests: add a tc matchall test case nfc: nci: Potential off by one in ->pipes[] array NFC: nci: Add some bounds checking in nci_hci_cmd_received()
2019-04-08Merge branch 'fixes-v5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull TPM fixes from James Morris: "From Jarkko: These are critical fixes for v5.1. Contains also couple of new selftests for v5.1 features (partial reads in /dev/tpm0)" * 'fixes-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selftests/tpm2: Open tpm dev in unbuffered mode selftests/tpm2: Extend tests to cover partial reads KEYS: trusted: fix -Wvarags warning tpm: Fix the type of the return value in calc_tpm2_event_size() KEYS: trusted: allow trusted.ko to initialize w/o a TPM tpm: fix an invalid condition in tpm_common_poll tpm: turn on TPM on suspend for TPM 1.x
2019-04-08Merge tag 'xtensa-20190408' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds
Pull xtensa fixes from Max Filippov: - fix syscall number passed to trace_sys_exit - fix syscall number initialization in start_thread - fix level interpretation in the return_address - fix format string warning in init_pmd * tag 'xtensa-20190408' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix format string warning in init_pmd xtensa: fix return_address xtensa: fix initialization of pt_regs::syscall in start_thread xtensa: use actual syscall number in do_syscall_trace_leave
2019-04-08Merge branch 'bnxt_en-fixes'David S. Miller
Michael Chan says: ==================== bnxt_en: 2 bug fixes. The first patch prevents possible driver crash if we get a bad RX index from the hardware. The second patch resets the device when the hardware reports buffer error to recover from the error. Please queue these for -stable also. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08bnxt_en: Reset device on RX buffer errors.Michael Chan
If the RX completion indicates RX buffers errors, the RX ring will be disabled by firmware and no packets will be received on that ring from that point on. Recover by resetting the device. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08bnxt_en: Improve RX consumer index validity check.Michael Chan
There is logic to check that the RX/TPA consumer index is the expected index to work around a hardware problem. However, the potentially bad consumer index is first used to index into an array to reference an entry. This can potentially crash if the bad consumer index is beyond legal range. Improve the logic to use the consumer index for dereferencing after the validity check and log an error message. Fixes: fa7e28127a5a ("bnxt_en: Add workaround to detect bad opaque in rx completion (part 2)") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08net: macb driver, check for SKBTX_HW_TSTAMPPaul Thomas
Make sure SKBTX_HW_TSTAMP (i.e. SOF_TIMESTAMPING_TX_HARDWARE) has been enabled for this skb. It does fix the issue where normal socks that aren't expecting a timestamp will not wake up on select, but when a user does want a SOF_TIMESTAMPING_TX_HARDWARE it does work. Signed-off-by: Paul Thomas <pthomas8589@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08Merge branch 'ethtool-fix-use-of-SPEED_UNKNOWN-constant'David S. Miller
Michael Zhivich says: ==================== ethtool: fix use of SPEED_UNKNOWN constant This patch series addresses 2 related issues: 1. ethtool_validate_speed() triggers a "signed-unsigned comparison" warning due to type difference of SPEED_UNKNOWN constant (int) and argument to ethtool_validate_speed (__u32). 2. some drivers use u16 storage for SPEED_UNKNOWN constant, resulting in value truncation and thus failure to test against SPEED_UNKNOWN correctly. This revised series addresses several feedback comments: - split up the patch in to series - do not unnecessarily change drivers that use "int" storage for speed values ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08qlogic: qlcnic: fix use of SPEED_UNKNOWN ethtool constantMichael Zhivich
qlcnic driver uses u16 to store SPEED_UKNOWN ethtool constant, which is defined as -1, resulting in value truncation and thus incorrect test results against SPEED_UNKNOWN. For example, the following test will print "False": u16 speed = SPEED_UNKNOWN; if (speed == SPEED_UNKNOWN) printf("True"); else printf("False"); Change storage of speed to use u32 to avoid this issue. Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constantMichael Zhivich
tg3 driver uses u16 to store SPEED_UKNOWN ethtool constant, which is defined as -1, resulting in value truncation and thus incorrect test results against SPEED_UNKNOWN. For example, the following test will print "False": u16 speed = SPEED_UNKNOWN; if (speed == SPEED_UNKNOWN) printf("True"); else printf("False"); Change storage of speed to use u32 to avoid this issue. Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08ethtool: avoid signed-unsigned comparison in ethtool_validate_speed()Michael Zhivich
When building C++ userspace code that includes ethtool.h with "-Werror -Wall", g++ complains about signed-unsigned comparison in ethtool_validate_speed() due to definition of SPEED_UNKNOWN as -1. Explicitly cast SPEED_UNKNOWN to __u32 to match type of ethtool_validate_speed() argument. Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08Merge branch 'erspan-use-after-free'David S. Miller
Lorenzo Bianconi says: ==================== fix possible use-after-free in erspan_v{4,6} Similar to what I did in commit bb9bd814ebf0 ("ipv6: sit: reset ip header pointer in ipip6_rcv"), fix possible use-after-free in erspan_rcv and ip6erspan_rcv extracting tunnel metadata since the packet can be 'uncloned' running __iptunnel_pull_header ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08net: ip6_gre: fix possible use-after-free in ip6erspan_rcvLorenzo Bianconi
erspan_v6 tunnels run __iptunnel_pull_header on received skbs to remove erspan header. This can determine a possible use-after-free accessing pkt_md pointer in ip6erspan_rcv since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device). Fix it resetting pkt_md pointer after __iptunnel_pull_header Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08net: ip_gre: fix possible use-after-free in erspan_rcvLorenzo Bianconi
erspan tunnels run __iptunnel_pull_header on received skbs to remove gre and erspan headers. This can determine a possible use-after-free accessing pkt_md pointer in erspan_rcv since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device). Fix it resetting pkt_md pointer after __iptunnel_pull_header Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08selftests/tpm2: Open tpm dev in unbuffered modeTadeusz Struk
In order to have control over how many bytes are read or written the device needs to be opened in unbuffered mode. Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08selftests/tpm2: Extend tests to cover partial readsTadeusz Struk
Three new tests added: 1. Send get random cmd, read header in 1st read, read the rest in second read - expect success 2. Send get random cmd, read only part of the response, send another get random command, read the response - expect success 3. Send get random cmd followed by another get random cmd, without reading the first response - expect the second cmd to fail with -EBUSY Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08KEYS: trusted: fix -Wvarags warningndesaulniers@google.com
Fixes the warning reported by Clang: security/keys/trusted.c:146:17: warning: passing an object that undergoes default argument promotion to 'va_start' has undefined behavior [-Wvarargs] va_start(argp, h3); ^ security/keys/trusted.c:126:37: note: parameter of type 'unsigned char' is declared here unsigned char *h2, unsigned char h3, ...) ^ Specifically, it seems that both the C90 (4.8.1.1) and C11 (7.16.1.4) standards explicitly call this out as undefined behavior: The parameter parmN is the identifier of the rightmost parameter in the variable parameter list in the function definition (the one just before the ...). If the parameter parmN is declared with ... or with a type that is not compatible with the type that results after application of the default argument promotions, the behavior is undefined. Link: https://github.com/ClangBuiltLinux/linux/issues/41 Link: https://www.eskimo.com/~scs/cclass/int/sx11c.html Suggested-by: David Laight <David.Laight@aculab.com> Suggested-by: Denis Kenzior <denkenz@gmail.com> Suggested-by: James Bottomley <jejb@linux.vnet.ibm.com> Suggested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08tpm: Fix the type of the return value in calc_tpm2_event_size()Yue Haibing
calc_tpm2_event_size() has an invalid signature because it returns a 'size_t' where as its signature says that it returns 'int'. Cc: <stable@vger.kernel.org> Fixes: 4d23cc323cdb ("tpm: add securityfs support for TPM 2.0 firmware event log") Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08KEYS: trusted: allow trusted.ko to initialize w/o a TPMJarkko Sakkinen
Allow trusted.ko to initialize w/o a TPM. This commit also adds checks to the exported functions to fail when a TPM is not available. Fixes: 240730437deb ("KEYS: trusted: explicitly use tpm_chip structure...") Cc: James Morris <jmorris@namei.org> Reported-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08tpm: fix an invalid condition in tpm_common_pollTadeusz Struk
The poll condition should only check response_length, because reads should only be issued if there is data to read. The response_read flag only prevents double writes. The problem was that the write set the response_read to false, enqued a tpm job, and returned. Then application called poll which checked the response_read flag and returned EPOLLIN. Then the application called read, but got nothing. After all that the async_work kicked in. Added also mutex_lock around the poll check to prevent other possible race conditions. Fixes: 9488585b21bef0df12 ("tpm: add support for partial reads") Reported-by: Mantas Mikulėnas <grawity@gmail.com> Tested-by: Mantas Mikulėnas <grawity@gmail.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08tpm: turn on TPM on suspend for TPM 1.xJarkko Sakkinen
tpm_chip_start/stop() should be also called for TPM 1.x devices on suspend. Add that functionality back. Do not lock the chip because it is unnecessary as there are no multiple threads using it when doing the suspend. Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()") Reported-by: Paul Zimmerman <pauldzim@gmail.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08r8169: disable ASPM againHeiner Kallweit
There's a significant number of reports that re-enabling ASPM causes different issues, ranging from decreased performance to system not booting at all. This affects only a minority of users, but the number of affected users is big enough that we better switch off ASPM again. This will hurt notebook users who are not affected by the issues, they may see decreased battery runtime w/o ASPM. With the PCI core folks is being discussed to add generic sysfs attributes to control ASPM. Once this is in place brave enough users can re-enable ASPM on their system. Fixes: a99790bf5c7f ("r8169: Reinstate ASPM Support") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08MAINTAINERS: ieee802154: update documentation file patternStefan Schmidt
When moving the documentation for the ieee802154 subsystem from plain text to rst the file pattern in the MAINTAINERS file got wrong. Updating it here to fix scripts using this file. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08mac80211: make ieee80211_schedule_txq schedule empty TXQsFelix Fietkau
Currently there is no way for the driver to signal to mac80211 that it should schedule a TXQ even if there are no packets on the mac80211 part of that queue. This is problematic if the driver has an internal retry queue to deal with software A-MPDU retry. This patch changes the behavior of ieee80211_schedule_txq to always schedule the queue, as its only user (ath9k) seems to expect such behavior already: it calls this function on tx status and on powersave wakeup whenever its internal retry queue is not empty. Also add an extra argument to ieee80211_return_txq to get the same behavior. This fixes an issue on ath9k where tx queues with packets to retry (and no new packets in mac80211) would not get serviced. Fixes: 89cea7493a346 ("ath9k: Switch to mac80211 TXQ scheduling and airtime APIs") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-08mac80211_hwsim: calculate if_combination.max_interfacesJohannes Berg
If we just set this to 2048, and have multiple limits you can select from, the total number might run over and cause a warning in cfg80211. This doesn't make sense, so we just calculate the total max_interfaces now. Reported-by: syzbot+8f91bd563bbff230d0ee@syzkaller.appspotmail.com Fixes: 99e3a44bac37 ("mac80211_hwsim: allow setting iftype support") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-08cfg80211: add ratelimited variants of err and warnStanislaw Gruszka
wiphy_{err,warn}_ratelimited will be used by rt2x00 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-07Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a bug in the implementation of xcbc and cmac in caam" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - fix copy of next buffer for xcbc and cmac
2019-04-07net: vrf: Fix ping failed when vrf mtu is set to 0Miaohe Lin
When the mtu of a vrf device is set to 0, it would cause ping failed. So I think we should limit vrf mtu in a reasonable range to solve this problem. I set dev->min_mtu to IPV6_MIN_MTU, so it will works for both ipv4 and ipv6. And if dev->max_mtu still be 0 can be confusing, so I set dev->max_mtu to ETH_MAX_MTU. Here is the reproduce step: 1.Config vrf interface and set mtu to 0: 3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master vrf1 state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:9e:dd:c1 brd ff:ff:ff:ff:ff:ff 2.Ping peer: 3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master vrf1 state UP group default qlen 1000 link/ether 52:54:00:9e:dd:c1 brd ff:ff:ff:ff:ff:ff inet 10.0.0.1/16 scope global enp4s0 valid_lft forever preferred_lft forever connect: Network is unreachable 3.Set mtu to default value, ping works: PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data. 64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=1.88 ms Fixes: ad49bc6361ca2 ("net: vrf: remove MTU limits for vrf device") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-07slab: fix a crash by reading /proc/slab_allocatorsQian Cai
The commit 510ded33e075 ("slab: implement slab_root_caches list") changes the name of the list node within "struct kmem_cache" from "list" to "root_caches_node", but leaks_show() still use the "list" which causes a crash when reading /proc/slab_allocators. You need to have CONFIG_SLAB=y and CONFIG_MEMCG=y to see the problem, because without MEMCG all slab caches are root caches, and the "list" node happens to be the right one. Fixes: 510ded33e075 ("slab: implement slab_root_caches list") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Tobin C. Harding <tobin@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-07selftests: add a tc matchall test caseNicolas Dichtel
This is a follow up of the commit 0db6f8befc32 ("net/sched: fix ->get helper of the matchall cls"). To test it: $ cd tools/testing/selftests/tc-testing $ ln -s ../plugin-lib/nsPlugin.py plugins/20-nsPlugin.py $ ./tdc.py -n -e 2638 Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-07Linux 5.1-rc4Linus Torvalds
2019-04-07Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A collection of fixes from the last few weeks. Most of them are smaller tweaks and fixes to DT and hardware descriptions for boards. Some of the more significant ones are: - eMMC and RGMII stability tweaks for rk3288 - DDC fixes for Rock PI 4 - Audio fixes for two TI am335x eval boards - D_CAN clock fix for am335x - Compilation fixes for clang - !HOTPLUG_CPU compilation fix for one of the new platforms this release (milbeaut) - A revert of a gpio fix for nomadik that instead was fixed in the gpio subsystem - Whitespace fix for the DT JSON schema (no tabs allowed)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) ARM: milbeaut: fix build with !CONFIG_HOTPLUG_CPU ARM: iop: don't use using 64-bit DMA masks ARM: orion: don't use using 64-bit DMA masks Revert "ARM: dts: nomadik: Fix polarity of SPI CS" dt-bindings: cpu: Fix JSON schema arm/mach-at91/pm : fix possible object reference leak ARM: dts: at91: Fix typo in ISC_D0 on PC9 ARM: dts: Fix dcan clkctrl clock for am3 reset: meson-audio-arb: Fix missing .owner setting of reset_controller_dev dt-bindings: reset: meson-g12a: Add missing USB2 PHY resets ARM: dts: rockchip: Remove #address/#size-cells from rk3288-veyron gpio-keys ARM: dts: rockchip: Remove #address/#size-cells from rk3288 mipi_dsi ARM: dts: rockchip: Fix gpu opp node names for rk3288 ARM: dts: am335x-evmsk: Correct the regulators for the audio codec ARM: dts: am335x-evm: Correct the regulators for the audio codec ARM: OMAP2+: add missing of_node_put after of_device_is_available ARM: OMAP1: ams-delta: Fix broken GPIO ID allocation arm64: dts: stratix10: add the sysmgr-syscon property from the gmac's arm64: dts: rockchip: fix rk3328 sdmmc0 write errors arm64: dts: rockchip: fix rk3328 rgmii high tx error rate ...
2019-04-07Merge tag 'for-linus-20190407' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Fixups for the pf/pcd queue handling (YueHaibing) - Revert of the three direct issue changes as they have been proven to cause an issue with dm-mpath (Bart) - Plug rq_count reset fix (Dongli) - io_uring double free in fileset registration error handling (me) - Make null_blk handle bad numa node passed in (John) - BFQ ifdef fix (Konstantin) - Flush queue leak fix (Shenghui) - Plug trace fix (Yufen) * tag 'for-linus-20190407' of git://git.kernel.dk/linux-block: xsysace: Fix error handling in ace_setup null_blk: prevent crash from bad home_node value block: Revert v5.0 blk_mq_request_issue_directly() changes paride/pcd: Fix potential NULL pointer dereference and mem leak blk-mq: do not reset plug->rq_count before the list is sorted paride/pf: Fix potential NULL pointer dereference io_uring: fix double free in case of fileset regitration failure blk-mq: add trace block plug and unplug for multiple queues block: use blk_free_flush_queue() to free hctx->fq in blk_mq_init_hctx block/bfq: fix ifdef for CONFIG_BFQ_GROUP_IOSCHED=y
2019-04-07ARM: milbeaut: fix build with !CONFIG_HOTPLUG_CPUArnd Bergmann
When HOTPLUG_CPU is disabled, some fields in the smp operations are not available or needed: arch/arm/mach-milbeaut/platsmp.c:90:3: error: field designator 'cpu_die' does not refer to any field in type 'struct smp_operations' .cpu_die = m10v_cpu_die, ^ arch/arm/mach-milbeaut/platsmp.c:91:3: error: field designator 'cpu_kill' does not refer to any field in type 'struct smp_operations' .cpu_kill = m10v_cpu_kill, ^ Hide them in an #ifdef like the other platforms do. Fixes: 9fb29c734f9e ("ARM: milbeaut: Add basic support for Milbeaut m10v SoC") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-07ARM: iop: don't use using 64-bit DMA masksArnd Bergmann
clang warns about statically defined DMA masks from the DMA_BIT_MASK macro with length 64: arch/arm/mach-iop13xx/setup.c:303:35: error: shift count >= width of type [-Werror,-Wshift-count-overflow] static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64); ^~~~~~~~~~~~~~~~ include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK' #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) ^ ~~~ The ones in iop shouldn't really be 64 bit masks, so changing them to what the driver can support avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-07ARM: orion: don't use using 64-bit DMA masksArnd Bergmann
clang warns about statically defined DMA masks from the DMA_BIT_MASK macro with length 64: arch/arm/plat-orion/common.c:625:29: error: shift count >= width of type [-Werror,-Wshift-count-overflow] .coherent_dma_mask = DMA_BIT_MASK(64), ^~~~~~~~~~~~~~~~ include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK' #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) The ones in orion shouldn't really be 64 bit masks, so changing them to what the driver can support avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-07Revert "ARM: dts: nomadik: Fix polarity of SPI CS"Olof Johansson
This reverts commit fa9463564e77067df81b0b8dec91adbbbc47bfb4. Per Linus Walleij: Dear ARM SoC maintainers, can you please revert this patch. It was the wrong solution to the wrong problem, and I must have acted in stress. Andrey fixed the real bug in a proper way in these commits: commit e5545c94e43b8f6599ffc01df8d1aedf18ee912a "gpio: of: Check propname before applying "cs-gpios" quirks" commit 7ce40277bf848391705011ba37eac2e377cbd9e6 "gpio: of: Check for "spi-cs-high" in child instead of parent node" Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-07Merge tag 'omap-for-v5.1/fixes-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.1-rc cycle Few small fixes for omap variants: - Fix ams-delta gpio IDs - Add missing of_node_put for omapdss platform init code - Fix unconfigured audio regulators for two am335x boards - Fix use of wrong offset for am335x d_can clocks * tag 'omap-for-v5.1/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix dcan clkctrl clock for am3 ARM: dts: am335x-evmsk: Correct the regulators for the audio codec ARM: dts: am335x-evm: Correct the regulators for the audio codec ARM: OMAP2+: add missing of_node_put after of_device_is_available ARM: OMAP1: ams-delta: Fix broken GPIO ID allocation Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-07Merge tag 'at91-5.1-fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 5.1 - fix a typo in sama5d2 pinmuxing which concerns the ISC data 0 signal - fix a kobject reference leak * tag 'at91-5.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: arm/mach-at91/pm : fix possible object reference leak ARM: dts: at91: Fix typo in ISC_D0 on PC9 Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 02:01:01 +0000