summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-03-01net: enetc: take the MDIO lock only once per NAPI poll cycleVladimir Oltean
The workaround for the ENETC MDIO erratum caused a performance degradation of 82 Kpps (seen with IP forwarding of two 1Gbps streams of 64B packets). This is due to excessive locking and unlocking in the fast path, which can be avoided. By taking the MDIO read-side lock only once per NAPI poll cycle, we are able to regain 54 Kpps (65%) of the performance hit. The rest of the performance degradation comes from the TX data path, but unfortunately it doesn't look like we can optimize that away easily, even with netdev_xmit_more(), there just isn't any skb batching done, to help with taking the MDIO lock less often than once per packet. We need to change the register accessor type for enetc_get_tx_tstamp, because it now runs under the enetc_lock_mdio as per the new call path detailed below: enetc_msix -> napi_schedule -> enetc_poll -> enetc_lock_mdio -> enetc_clean_tx_ring -> enetc_get_tx_tstamp -> enetc_clean_rx_ring -> enetc_unlock_mdio Fixes: fd5736bf9f23 ("enetc: Workaround for MDIO register access issue") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01net: enetc: initialize RFS/RSS memories for unused ports tooVladimir Oltean
Michael reports that since linux-next-20210211, the AER messages for ECC errors have started reappearing, and this time they can be reliably reproduced with the first ping on one of his LS1028A boards. $ ping 1[ 33.258069] pcieport 0000:00:1f.0: AER: Multiple Corrected error received: 0000:00:00.0 72.16.0.1 PING [ 33.267050] pcieport 0000:00:1f.0: AER: can't find device of ID0000 172.16.0.1 (172.16.0.1): 56 data bytes 64 bytes from 172.16.0.1: seq=0 ttl=64 time=17.124 ms 64 bytes from 172.16.0.1: seq=1 ttl=64 time=0.273 ms $ devmem 0x1f8010e10 32 0xC0000006 It isn't clear why this is necessary, but it seems that for the errors to go away, we must clear the entire RFS and RSS memory, not just for the ports in use. Sadly the code is structured in such a way that we can't have unified logic for the used and unused ports. For the minimal initialization of an unused port, we need just to enable and ioremap the PF memory space, and a control buffer descriptor ring. Unused ports must then free the CBDR because the driver will exit, but used ports can not pick up from where that code path left, since the CBDR API does not reinitialize a ring when setting it up, so its producer and consumer indices are out of sync between the software and hardware state. So a separate enetc_init_unused_port function was created, and it gets called right after the PF memory space is enabled. Fixes: 07bf34a50e32 ("net: enetc: initialize the RFS and RSS memories") Reported-by: Michael Walle <michael@walle.cc> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01net: enetc: don't overwrite the RSS indirection table when initializingVladimir Oltean
After the blamed patch, all RX traffic gets hashed to CPU 0 because the hashing indirection table set up in: enetc_pf_probe -> enetc_alloc_si_resources -> enetc_configure_si -> enetc_setup_default_rss_table is overwritten later in: enetc_pf_probe -> enetc_init_port_rss_memory which zero-initializes the entire port RSS table in order to avoid ECC errors. The trouble really is that enetc_init_port_rss_memory really neads enetc_alloc_si_resources to be called, because it depends upon enetc_alloc_cbdr and enetc_setup_cbdr. But that whole enetc_configure_si thing could have been better thought out, it has nothing to do in a function called "alloc_si_resources", especially since its counterpart, "free_si_resources", does nothing to unwind the configuration of the SI. The point is, we need to pull out enetc_configure_si out of enetc_alloc_resources, and move it after enetc_init_port_rss_memory. This allows us to set up the default RSS indirection table after initializing the memory. Fixes: 07bf34a50e32 ("net: enetc: initialize the RFS and RSS memories") Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01inetpeer: use div64_ul() and clamp_val() calculate inet_peer_thresholdYejune Deng
In inet_initpeers(), struct inet_peer on IA32 uses 128 bytes in nowdays. Get rid of the cascade and use div64_ul() and clamp_val() calculate that will not need to be adjusted in the future as suggested by Eric Dumazet. Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Yejune Deng <yejune.deng@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01net/qrtr: fix __netdev_alloc_skb callPavel Skripkin
syzbot found WARNING in __alloc_pages_nodemask()[1] when order >= MAX_ORDER. It was caused by a huge length value passed from userspace to qrtr_tun_write_iter(), which tries to allocate skb. Since the value comes from the untrusted source there is no need to raise a warning in __alloc_pages_nodemask(). [1] WARNING in __alloc_pages_nodemask+0x5f8/0x730 mm/page_alloc.c:5014 Call Trace: __alloc_pages include/linux/gfp.h:511 [inline] __alloc_pages_node include/linux/gfp.h:524 [inline] alloc_pages_node include/linux/gfp.h:538 [inline] kmalloc_large_node+0x60/0x110 mm/slub.c:3999 __kmalloc_node_track_caller+0x319/0x3f0 mm/slub.c:4496 __kmalloc_reserve net/core/skbuff.c:150 [inline] __alloc_skb+0x4e4/0x5a0 net/core/skbuff.c:210 __netdev_alloc_skb+0x70/0x400 net/core/skbuff.c:446 netdev_alloc_skb include/linux/skbuff.h:2832 [inline] qrtr_endpoint_post+0x84/0x11b0 net/qrtr/qrtr.c:442 qrtr_tun_write_iter+0x11f/0x1a0 net/qrtr/tun.c:98 call_write_iter include/linux/fs.h:1901 [inline] new_sync_write+0x426/0x650 fs/read_write.c:518 vfs_write+0x791/0xa30 fs/read_write.c:605 ksys_write+0x12d/0x250 fs/read_write.c:658 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by: syzbot+80dccaee7c6630fa9dcf@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Acked-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01Merge branch 'sh_eth-masks'David S. Miller
Sergey Shtylyov says: ==================== Fix TRSCER masks in the Ether driver Here are 3 patches against DaveM's 'net' repo. I'm fixing the TRSCER masks in the driver to match the manuals... ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01sh_eth: fix TRSCER mask for R7S9210Sergey Shtylyov
According to the RZ/A2M Group User's Manual: Hardware, Rev. 2.00, the TRSCER register has bit 9 reserved, hence we can't use the driver's default TRSCER mask. Add the explicit initializer for sh_eth_cpu_data:: trscer_err_mask for R7S9210. Fixes: 6e0bb04d0e4f ("sh_eth: Add R7S9210 support") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01sh_eth: fix TRSCER mask for R7S72100Sergey Shtylyov
According to the RZ/A1H Group, RZ/A1M Group User's Manual: Hardware, Rev. 4.00, the TRSCER register has bit 9 reserved, hence we can't use the driver's default TRSCER mask. Add the explicit initializer for sh_eth_cpu_data::trscer_err_mask for R7S72100. Fixes: db893473d313 ("sh_eth: Add support for r7s72100") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01sh_eth: fix TRSCER mask for SH771xSergey Shtylyov
According to the SH7710, SH7712, SH7713 Group User's Manual: Hardware, Rev. 3.00, the TRSCER register actually has only bit 7 valid (and named differently), with all the other bits reserved. Apparently, this was not the case with some early revisions of the manual as we have the other bits declared (and set) in the original driver. Follow the suit and add the explicit sh_eth_cpu_data::trscer_err_mask initializer for SH771x... Fixes: 86a74ff21a7a ("net: sh_eth: add support for Renesas SuperH Ethernet") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01atm: lanai: dont run lanai_dev_close if not openTong Zhang
lanai_dev_open() can fail. When it fail, lanai->base is unmapped and the pci device is disabled. The caller, lanai_init_one(), then tries to run atm_dev_deregister(). This will subsequently call lanai_dev_close() and use the already released MMIO area. To fix this issue, set the lanai->base to NULL if open fail, and test the flag in lanai_dev_close(). [ 8.324153] lanai: lanai_start() failed, err=19 [ 8.324819] lanai(itf 0): shutting down interface [ 8.325211] BUG: unable to handle page fault for address: ffffc90000180024 [ 8.325781] #PF: supervisor write access in kernel mode [ 8.326215] #PF: error_code(0x0002) - not-present page [ 8.326641] PGD 100000067 P4D 100000067 PUD 100139067 PMD 10013a067 PTE 0 [ 8.327206] Oops: 0002 [#1] SMP KASAN NOPTI [ 8.327557] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #12 [ 8.328229] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-4 [ 8.329145] RIP: 0010:lanai_dev_close+0x4f/0xe5 [lanai] [ 8.329587] Code: 00 48 c7 c7 00 d3 01 c0 e8 49 4e 0a c2 48 8d bd 08 02 00 00 e8 6e 52 14 c1 48 80 [ 8.330917] RSP: 0018:ffff8881029ef680 EFLAGS: 00010246 [ 8.331196] RAX: 000000000003fffe RBX: ffff888102fb4800 RCX: ffffffffc001a98a [ 8.331572] RDX: ffffc90000180000 RSI: 0000000000000246 RDI: ffff888102fb4000 [ 8.331948] RBP: ffff888102fb4000 R08: ffffffff8115da8a R09: ffffed102053deaa [ 8.332326] R10: 0000000000000003 R11: ffffed102053dea9 R12: ffff888102fb48a4 [ 8.332701] R13: ffffffffc00123c0 R14: ffff888102fb4b90 R15: ffff888102fb4b88 [ 8.333077] FS: 00007f08eb9056a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000 [ 8.333502] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.333806] CR2: ffffc90000180024 CR3: 0000000102a28000 CR4: 00000000000006f0 [ 8.334182] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.334557] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.334932] Call Trace: [ 8.335066] atm_dev_deregister+0x161/0x1a0 [atm] [ 8.335324] lanai_init_one.cold+0x20c/0x96d [lanai] [ 8.335594] ? lanai_send+0x2a0/0x2a0 [lanai] [ 8.335831] local_pci_probe+0x6f/0xb0 [ 8.336039] pci_device_probe+0x171/0x240 [ 8.336255] ? pci_device_remove+0xe0/0xe0 [ 8.336475] ? kernfs_create_link+0xb6/0x110 [ 8.336704] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 8.336983] really_probe+0x161/0x420 [ 8.337181] driver_probe_device+0x6d/0xd0 [ 8.337401] device_driver_attach+0x82/0x90 [ 8.337626] ? device_driver_attach+0x90/0x90 [ 8.337859] __driver_attach+0x60/0x100 [ 8.338065] ? device_driver_attach+0x90/0x90 [ 8.338298] bus_for_each_dev+0xe1/0x140 [ 8.338511] ? subsys_dev_iter_exit+0x10/0x10 [ 8.338745] ? klist_node_init+0x61/0x80 [ 8.338956] bus_add_driver+0x254/0x2a0 [ 8.339164] driver_register+0xd3/0x150 [ 8.339370] ? 0xffffffffc0028000 [ 8.339550] do_one_initcall+0x84/0x250 [ 8.339755] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 8.340076] ? free_vmap_area_noflush+0x1a5/0x5c0 [ 8.340329] ? unpoison_range+0xf/0x30 [ 8.340532] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 8.340806] ? unpoison_range+0xf/0x30 [ 8.341014] ? unpoison_range+0xf/0x30 [ 8.341217] do_init_module+0xf8/0x350 [ 8.341419] load_module+0x3fe6/0x4340 [ 8.341621] ? vm_unmap_ram+0x1d0/0x1d0 [ 8.341826] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 8.342101] ? module_frob_arch_sections+0x20/0x20 [ 8.342358] ? __do_sys_finit_module+0x108/0x170 [ 8.342604] __do_sys_finit_module+0x108/0x170 [ 8.342841] ? __ia32_sys_init_module+0x40/0x40 [ 8.343083] ? file_open_root+0x200/0x200 [ 8.343298] ? do_sys_open+0x85/0xe0 [ 8.343491] ? filp_open+0x50/0x50 [ 8.343675] ? exit_to_user_mode_prepare+0xfc/0x130 [ 8.343935] do_syscall_64+0x33/0x40 [ 8.344132] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 8.344401] RIP: 0033:0x7f08eb887cf7 [ 8.344594] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 41 [ 8.345565] RSP: 002b:00007ffcd5c98ad8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 8.345962] RAX: ffffffffffffffda RBX: 00000000008fea70 RCX: 00007f08eb887cf7 [ 8.346336] RDX: 0000000000000000 RSI: 00000000008fd9e0 RDI: 0000000000000003 [ 8.346711] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 8.347085] R10: 00007f08eb8eb300 R11: 0000000000000246 R12: 00000000008fd9e0 [ 8.347460] R13: 0000000000000000 R14: 00000000008fddd0 R15: 0000000000000001 [ 8.347836] Modules linked in: lanai(+) atm [ 8.348065] CR2: ffffc90000180024 [ 8.348244] ---[ end trace 7fdc1c668f2003e5 ]--- [ 8.348490] RIP: 0010:lanai_dev_close+0x4f/0xe5 [lanai] [ 8.348772] Code: 00 48 c7 c7 00 d3 01 c0 e8 49 4e 0a c2 48 8d bd 08 02 00 00 e8 6e 52 14 c1 48 80 [ 8.349745] RSP: 0018:ffff8881029ef680 EFLAGS: 00010246 [ 8.350022] RAX: 000000000003fffe RBX: ffff888102fb4800 RCX: ffffffffc001a98a [ 8.350397] RDX: ffffc90000180000 RSI: 0000000000000246 RDI: ffff888102fb4000 [ 8.350772] RBP: ffff888102fb4000 R08: ffffffff8115da8a R09: ffffed102053deaa [ 8.351151] R10: 0000000000000003 R11: ffffed102053dea9 R12: ffff888102fb48a4 [ 8.351525] R13: ffffffffc00123c0 R14: ffff888102fb4b90 R15: ffff888102fb4b88 [ 8.351918] FS: 00007f08eb9056a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000 [ 8.352343] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.352647] CR2: ffffc90000180024 CR3: 0000000102a28000 CR4: 00000000000006f0 [ 8.353022] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.353397] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.353958] modprobe (95) used greatest stack depth: 26216 bytes left Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01atm: eni: dont release is never initializedTong Zhang
label err_eni_release is reachable when eni_start() fail. In eni_start() it calls dev->phy->start() in the last step, if start() fail we don't need to call phy->stop(), if start() is never called, we neither need to call phy->stop(), otherwise null-ptr-deref will happen. In order to fix this issue, don't call phy->stop() in label err_eni_release [ 4.875714] ================================================================== [ 4.876091] BUG: KASAN: null-ptr-deref in suni_stop+0x47/0x100 [suni] [ 4.876433] Read of size 8 at addr 0000000000000030 by task modprobe/95 [ 4.876778] [ 4.876862] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #2 [ 4.877290] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd94 [ 4.877876] Call Trace: [ 4.878009] dump_stack+0x7d/0xa3 [ 4.878191] kasan_report.cold+0x10c/0x10e [ 4.878410] ? __slab_free+0x2f0/0x340 [ 4.878612] ? suni_stop+0x47/0x100 [suni] [ 4.878832] suni_stop+0x47/0x100 [suni] [ 4.879043] eni_do_release+0x3b/0x70 [eni] [ 4.879269] eni_init_one.cold+0x1152/0x1747 [eni] [ 4.879528] ? _raw_spin_lock_irqsave+0x7b/0xd0 [ 4.879768] ? eni_ioctl+0x270/0x270 [eni] [ 4.879990] ? __mutex_lock_slowpath+0x10/0x10 [ 4.880226] ? eni_ioctl+0x270/0x270 [eni] [ 4.880448] local_pci_probe+0x6f/0xb0 [ 4.880650] pci_device_probe+0x171/0x240 [ 4.880864] ? pci_device_remove+0xe0/0xe0 [ 4.881086] ? kernfs_create_link+0xb6/0x110 [ 4.881315] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 4.881594] really_probe+0x161/0x420 [ 4.881791] driver_probe_device+0x6d/0xd0 [ 4.882010] device_driver_attach+0x82/0x90 [ 4.882233] ? device_driver_attach+0x90/0x90 [ 4.882465] __driver_attach+0x60/0x100 [ 4.882671] ? device_driver_attach+0x90/0x90 [ 4.882903] bus_for_each_dev+0xe1/0x140 [ 4.883114] ? subsys_dev_iter_exit+0x10/0x10 [ 4.883346] ? klist_node_init+0x61/0x80 [ 4.883557] bus_add_driver+0x254/0x2a0 [ 4.883764] driver_register+0xd3/0x150 [ 4.883971] ? 0xffffffffc0038000 [ 4.884149] do_one_initcall+0x84/0x250 [ 4.884355] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 4.884674] ? unpoison_range+0xf/0x30 [ 4.884875] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.885150] ? unpoison_range+0xf/0x30 [ 4.885352] ? unpoison_range+0xf/0x30 [ 4.885557] do_init_module+0xf8/0x350 [ 4.885760] load_module+0x3fe6/0x4340 [ 4.885960] ? vm_unmap_ram+0x1d0/0x1d0 [ 4.886166] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.886441] ? module_frob_arch_sections+0x20/0x20 [ 4.886697] ? __do_sys_finit_module+0x108/0x170 [ 4.886941] __do_sys_finit_module+0x108/0x170 [ 4.887178] ? __ia32_sys_init_module+0x40/0x40 [ 4.887419] ? file_open_root+0x200/0x200 [ 4.887634] ? do_sys_open+0x85/0xe0 [ 4.887826] ? filp_open+0x50/0x50 [ 4.888009] ? fpregs_assert_state_consistent+0x4d/0x60 [ 4.888287] ? exit_to_user_mode_prepare+0x2f/0x130 [ 4.888547] do_syscall_64+0x33/0x40 [ 4.888739] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 4.889010] RIP: 0033:0x7ff62fcf1cf7 [ 4.889202] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f71 [ 4.890172] RSP: 002b:00007ffe6644ade8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 4.890570] RAX: ffffffffffffffda RBX: 0000000000f2ca70 RCX: 00007ff62fcf1cf7 [ 4.890944] RDX: 0000000000000000 RSI: 0000000000f2b9e0 RDI: 0000000000000003 [ 4.891318] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 4.891691] R10: 00007ff62fd55300 R11: 0000000000000246 R12: 0000000000f2b9e0 [ 4.892064] R13: 0000000000000000 R14: 0000000000f2bdd0 R15: 0000000000000001 [ 4.892439] ================================================================== Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01net: phy: fix save wrong speed and duplex problem if autoneg is onGuangbin Huang
If phy uses generic driver and autoneg is on, enter command "ethtool -s eth0 speed 50" will not change phy speed actually, but command "ethtool eth0" shows speed is 50Mb/s because phydev->speed has been set to 50 and no update later. And duplex setting has same problem too. However, if autoneg is on, phy only changes speed and duplex according to phydev->advertising, but not phydev->speed and phydev->duplex. So in this case, phydev->speed and phydev->duplex don't need to be set in function phy_ethtool_ksettings_set() if autoneg is on. Fixes: 51e2a3846eab ("PHY: Avoid unnecessary aneg restarts") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01net: always use icmp{,v6}_ndo_send from ndo_start_xmitJason A. Donenfeld
There were a few remaining tunnel drivers that didn't receive the prior conversion to icmp{,v6}_ndo_send. Knowing now that this could lead to memory corrution (see ee576c47db60 ("net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending") for details), there's even more imperative to have these all converted. So this commit goes through the remaining cases that I could find and does a boring translation to the ndo variety. The Fixes: line below is the merge that originally added icmp{,v6}_ ndo_send and converted the first batch of icmp{,v6}_send users. The rationale then for the change applies equally to this patch. It's just that these drivers were left out of the initial conversion because these network devices are hiding in net/ rather than in drivers/net/. Cc: Florian Westphal <fw@strlen.de> Cc: Willem de Bruijn <willemb@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Fixes: 803381f9f117 ("Merge branch 'icmp-account-for-NAT-when-sending-icmps-from-ndo-layer'") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01net: dsa: tag_rtl4_a: fix egress tagsDENG Qingfang
Commit 86dd9868b878 has several issues, but was accepted too soon before anyone could take a look. - Double free. dsa_slave_xmit() will free the skb if the xmit function returns NULL, but the skb is already freed by eth_skb_pad(). Use __skb_put_padto() to avoid that. - Unnecessary allocation. It has been done by DSA core since commit a3b0b6479700. - A u16 pointer points to skb data. It should be __be16 for network byte order. - Typo in comments. "numer" -> "number". Fixes: 86dd9868b878 ("net: dsa: tag_rtl4_a: Support also egress tags") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01xen-netback: use local var in xenvif_tx_check_gop() instead of re-calculatingJan Beulich
shinfo already holds the result of skb_shinfo(skb) at this point - no need to re-invoke the construct even twice. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01net: phy: ti: take into account all possible interrupt sourcesIoana Ciornei
The previous implementation of .handle_interrupt() did not take into account the fact that all the interrupt status registers should be acknowledged since multiple interrupt sources could be asserted. Fix this by reading all the status registers before exiting with IRQ_NONE or triggering the PHY state machine. Fixes: 1d1ae3c6ca3f ("net: phy: ti: implement generic .handle_interrupt() callback") Reported-by: Sven Schuchmann <schuchmann@schleissheimer.de> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20210226153020.867852-1-ciorneiioana@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-03-01can: tcan4x5x: tcan4x5x_init(): fix initialization - clear MRAM before ↵Torin Cooper-Bennun
entering Normal Mode This patch prevents a potentially destructive race condition. The device is fully operational on the bus after entering Normal Mode, so zeroing the MRAM after entering this mode may lead to loss of information, e.g. new received messages. This patch fixes the problem by first initializing the MRAM, then bringing the device into Normale Mode. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Link: https://lore.kernel.org/r/20210226163440.313628-1-torin@maxiluxsystems.com Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-01can: skb: can_skb_set_owner(): fix ref counting if socket was closed before ↵Oleksij Rempel
setting skb ownership There are two ref count variables controlling the free()ing of a socket: - struct sock::sk_refcnt - which is changed by sock_hold()/sock_put() - struct sock::sk_wmem_alloc - which accounts the memory allocated by the skbs in the send path. In case there are still TX skbs on the fly and the socket() is closed, the struct sock::sk_refcnt reaches 0. In the TX-path the CAN stack clones an "echo" skb, calls sock_hold() on the original socket and references it. This produces the following back trace: | WARNING: CPU: 0 PID: 280 at lib/refcount.c:25 refcount_warn_saturate+0x114/0x134 | refcount_t: addition on 0; use-after-free. | Modules linked in: coda_vpu(E) v4l2_jpeg(E) videobuf2_vmalloc(E) imx_vdoa(E) | CPU: 0 PID: 280 Comm: test_can.sh Tainted: G E 5.11.0-04577-gf8ff6603c617 #203 | Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) | Backtrace: | [<80bafea4>] (dump_backtrace) from [<80bb0280>] (show_stack+0x20/0x24) r7:00000000 r6:600f0113 r5:00000000 r4:81441220 | [<80bb0260>] (show_stack) from [<80bb593c>] (dump_stack+0xa0/0xc8) | [<80bb589c>] (dump_stack) from [<8012b268>] (__warn+0xd4/0x114) r9:00000019 r8:80f4a8c2 r7:83e4150c r6:00000000 r5:00000009 r4:80528f90 | [<8012b194>] (__warn) from [<80bb09c4>] (warn_slowpath_fmt+0x88/0xc8) r9:83f26400 r8:80f4a8d1 r7:00000009 r6:80528f90 r5:00000019 r4:80f4a8c2 | [<80bb0940>] (warn_slowpath_fmt) from [<80528f90>] (refcount_warn_saturate+0x114/0x134) r8:00000000 r7:00000000 r6:82b44000 r5:834e5600 r4:83f4d540 | [<80528e7c>] (refcount_warn_saturate) from [<8079a4c8>] (__refcount_add.constprop.0+0x4c/0x50) | [<8079a47c>] (__refcount_add.constprop.0) from [<8079a57c>] (can_put_echo_skb+0xb0/0x13c) | [<8079a4cc>] (can_put_echo_skb) from [<8079ba98>] (flexcan_start_xmit+0x1c4/0x230) r9:00000010 r8:83f48610 r7:0fdc0000 r6:0c080000 r5:82b44000 r4:834e5600 | [<8079b8d4>] (flexcan_start_xmit) from [<80969078>] (netdev_start_xmit+0x44/0x70) r9:814c0ba0 r8:80c8790c r7:00000000 r6:834e5600 r5:82b44000 r4:82ab1f00 | [<80969034>] (netdev_start_xmit) from [<809725a4>] (dev_hard_start_xmit+0x19c/0x318) r9:814c0ba0 r8:00000000 r7:82ab1f00 r6:82b44000 r5:00000000 r4:834e5600 | [<80972408>] (dev_hard_start_xmit) from [<809c6584>] (sch_direct_xmit+0xcc/0x264) r10:834e5600 r9:00000000 r8:00000000 r7:82b44000 r6:82ab1f00 r5:834e5600 r4:83f27400 | [<809c64b8>] (sch_direct_xmit) from [<809c6c0c>] (__qdisc_run+0x4f0/0x534) To fix this problem, only set skb ownership to sockets which have still a ref count > 0. Fixes: 0ae89beb283a ("can: add destructor for self generated skbs") Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Andre Naujoks <nautsch2@gmail.com> Link: https://lore.kernel.org/r/20210226092456.27126-1-o.rempel@pengutronix.de Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-01can: mcp251xfd: revert "can: mcp251xfd: add BQL support"Marc Kleine-Budde
In the following 4 patches | 99842c9685ab can: dev: can_rx_offload_get_echo_skb(): extend to return can frame length | 9420e1d495e2 can: dev: can_get_echo_skb(): extend to return can frame length | 1dcb6e57db83 can: dev: can_put_echo_skb(): extend to handle frame_len | f0ef72febc9a can: dev: extend struct can_skb_priv to hold CAN frame length the CAN echo SKB support was extended to hold the CAN frame length (which is the length of the CAN frame on the wire). It is meant as a helper for BQL support, to avoid the re-calculation of the frame length before sending it and on TX-completion. However if the CAN frame is send without the request to be looped back the SKB is discarded in can_put_echo_skb() and the subsequent can_get_echo_skb() and can_rx_offload_get_echo_skb() return 0 for the CAN frame length. This results in BQL stalling the TX queue after a few packages. Until the BQL helpers can_get_echo_skb() and can_rx_offload_get_echo_skb() are fixed, revert the BQL support for the mcp251xfd driver. This reverts commit 4162e18e949ba520d5116ac0323500355479a00e. Fixes: 4162e18e949b ("can: mcp251xfd: add BQL support") Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Thomas Kopp <thomas.kopp@microchip.com> Link: https://lore.kernel.org/r/20210228083347.28580-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-01can: flexcan: invoke flexcan_chip_freeze() to enter freeze modeJoakim Zhang
Invoke flexcan_chip_freeze() to enter freeze mode, since need poll freeze mode acknowledge. Fixes: e955cead03117 ("CAN: Add Flexcan CAN controller driver") Link: https://lore.kernel.org/r/20210218110037.16591-4-qiangqing.zhang@nxp.com Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-01can: flexcan: enable RX FIFO after FRZ/HALT validJoakim Zhang
RX FIFO enable failed could happen when do system reboot stress test: [ 0.303958] flexcan 5a8d0000.can: 5a8d0000.can supply xceiver not found, using dummy regulator [ 0.304281] flexcan 5a8d0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core [ 0.314640] flexcan 5a8d0000.can: registering netdev failed [ 0.320728] flexcan 5a8e0000.can: 5a8e0000.can supply xceiver not found, using dummy regulator [ 0.320991] flexcan 5a8e0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core [ 0.331360] flexcan 5a8e0000.can: registering netdev failed [ 0.337444] flexcan 5a8f0000.can: 5a8f0000.can supply xceiver not found, using dummy regulator [ 0.337716] flexcan 5a8f0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core [ 0.348117] flexcan 5a8f0000.can: registering netdev failed RX FIFO should be enabled after the FRZ/HALT are valid. But the current code enable RX FIFO and FRZ/HALT at the same time. Fixes: e955cead03117 ("CAN: Add Flexcan CAN controller driver") Link: https://lore.kernel.org/r/20210218110037.16591-3-qiangqing.zhang@nxp.com Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-01can: flexcan: assert FRZ bit in flexcan_chip_freeze()Joakim Zhang
Assert HALT bit to enter freeze mode, there is a premise that FRZ bit is asserted. This patch asserts FRZ bit in flexcan_chip_freeze, although the reset value is 1b'1. This is a prepare patch, later patch will invoke flexcan_chip_freeze() to enter freeze mode, which polling freeze mode acknowledge. Fixes: b1aa1c7a2165b ("can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze") Link: https://lore.kernel.org/r/20210218110037.16591-2-qiangqing.zhang@nxp.com Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-02-28Merge branch 'net-hns3-fixes-fot-net'Jakub Kicinski
Huazhong Tan says: ==================== net: hns3: fixes fot -net The patchset includes some fixes for the HNS3 ethernet driver. ==================== Link: https://lore.kernel.org/r/1614410693-8107-1-git-send-email-tanhuazhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-28net: hns3: fix bug when calculating the TCAM table infoJian Shen
The function hclge_fd_convert_tuple() is used to convert tuples and tuples mask to TCAM x and y. But it misuses the source mac as source mac mask when convert INNER_SRC_MAC, which may cause the flow director rule works unexpectedly. So fix it. Fixes: 117328680288 ("net: hns3: Add input key and action config support for flow director") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-28net: hns3: fix query vlan mask value error for flow directorJian Shen
Currently, the driver returns VLAN_VID_MASK for vlan mask field, when get flow director rule information for rule doesn't use vlan. It may cause the vlan mask value display as 0xf000 in this case, like below: estuary:/$ ethtool -u eth1 50 RX rings available Total 1 rules Filter: 2 Rule Type: TCP over IPv4 Src IP addr: 0.0.0.0 mask: 255.255.255.255 Dest IP addr: 0.0.0.0 mask: 255.255.255.255 TOS: 0x0 mask: 0xff Src port: 0 mask: 0xffff Dest port: 0 mask: 0xffff VLAN EtherType: 0x0 mask: 0xffff VLAN: 0x0 mask: 0xf000 User-defined: 0x1234 mask: 0x0 Action: Direct to queue 3 Fix it by return 0. Fixes: 05c2314fe6a8 ("net: hns3: Add support for rule query of flow director") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-28net: hns3: fix error mask definition of flow directorJian Shen
Currently, some bit filed definitions of flow director TCAM configuration command are incorrect. Since the wrong MSB is always 0, and these fields are assgined in order, so it still works. Fix it by redefine them. Fixes: 117328680288 ("net: hns3: Add input key and action config support for flow director") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-28net: Fix gro aggregation for udp encaps with zero csumDaniel Borkmann
We noticed a GRO issue for UDP-based encaps such as vxlan/geneve when the csum for the UDP header itself is 0. In that case, GRO aggregation does not take place on the phys dev, but instead is deferred to the vxlan/geneve driver (see trace below). The reason is essentially that GRO aggregation bails out in udp_gro_receive() for such case when drivers marked the skb with CHECKSUM_UNNECESSARY (ice, i40e, others) where for non-zero csums 2abb7cdc0dc8 ("udp: Add support for doing checksum unnecessary conversion") promotes those skbs to CHECKSUM_COMPLETE and napi context has csum_valid set. This is however not the case for zero UDP csum (here: csum_cnt is still 0 and csum_valid continues to be false). At the same time 57c67ff4bd92 ("udp: additional GRO support") added matches on !uh->check ^ !uh2->check as part to determine candidates for aggregation, so it certainly is expected to handle zero csums in udp_gro_receive(). The purpose of the check added via 662880f44203 ("net: Allow GRO to use and set levels of checksum unnecessary") seems to catch bad csum and stop aggregation right away. One way to fix aggregation in the zero case is to only perform the !csum_valid check in udp_gro_receive() if uh->check is infact non-zero. Before: [...] swapper 0 [008] 731.946506: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100400 len=1500 (1) swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100200 len=1500 swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101100 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101700 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101b00 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100600 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100f00 len=1500 swapper 0 [008] 731.946509: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100a00 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100500 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100700 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101d00 len=1500 (2) swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101000 len=1500 swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101c00 len=1500 swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101400 len=1500 swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100e00 len=1500 swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101600 len=1500 swapper 0 [008] 731.946521: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100800 len=774 swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497100400 len=14032 (1) swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497101d00 len=9112 (2) [...] # netperf -H 10.55.10.4 -t TCP_STREAM -l 20 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.01 13129.24 After: [...] swapper 0 [026] 521.862641: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479000 len=11286 (1) swapper 0 [026] 521.862643: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479000 len=11236 (1) swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d478500 len=2898 (2) swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479f00 len=8490 (3) swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d478500 len=2848 (2) swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479f00 len=8440 (3) [...] # netperf -H 10.55.10.4 -t TCP_STREAM -l 20 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.01 24576.53 Fixes: 57c67ff4bd92 ("udp: additional GRO support") Fixes: 662880f44203 ("net: Allow GRO to use and set levels of checksum unnecessary") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tom Herbert <tom@herbertland.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20210226212248.8300-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-28net: broadcom: bcm4908_enet: enable RX after processing packetsRafał Miłecki
When receiving a lot of packets hardware may run out of free descriptiors and stop RX ring. Enable it every time after handling received packets. Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210226132038.29849-1-zajec5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-28ethtool: fix the check logic of at least one channel for RX/TXYinjun Zhang
The command "ethtool -L <intf> combined 0" may clean the RX/TX channel count and skip the error path, since the attrs tb[ETHTOOL_A_CHANNELS_RX_COUNT] and tb[ETHTOOL_A_CHANNELS_TX_COUNT] are NULL in this case when recent ethtool is used. Tested using ethtool v5.10. Fixes: 7be92514b99c ("ethtool: check if there is at least one channel for TX/RX in the core") Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Louis Peens <louis.peens@netronome.com> Link: https://lore.kernel.org/r/20210225125102.23989-1-simon.horman@netronome.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-28netfilter: x_tables: gpf inside xt_find_revision()Vasily Averin
nested target/match_revfn() calls work with xt[NFPROTO_UNSPEC] lists without taking xt[NFPROTO_UNSPEC].mutex. This can race with module unload and cause host to crash: general protection fault: 0000 [#1] Modules linked in: ... [last unloaded: xt_cluster] CPU: 0 PID: 542455 Comm: iptables RIP: 0010:[<ffffffff8ffbd518>] [<ffffffff8ffbd518>] strcmp+0x18/0x40 RDX: 0000000000000003 RSI: ffff9a5a5d9abe10 RDI: dead000000000111 R13: ffff9a5a5d9abe10 R14: ffff9a5a5d9abd8c R15: dead000000000100 (VvS: %R15 -- &xt_match, %RDI -- &xt_match.name, xt_cluster unregister match in xt[NFPROTO_UNSPEC].match list) Call Trace: [<ffffffff902ccf44>] match_revfn+0x54/0xc0 [<ffffffff902ccf9f>] match_revfn+0xaf/0xc0 [<ffffffff902cd01e>] xt_find_revision+0x6e/0xf0 [<ffffffffc05a5be0>] do_ipt_get_ctl+0x100/0x420 [ip_tables] [<ffffffff902cc6bf>] nf_getsockopt+0x4f/0x70 [<ffffffff902dd99e>] ip_getsockopt+0xde/0x100 [<ffffffff903039b5>] raw_getsockopt+0x25/0x50 [<ffffffff9026c5da>] sock_common_getsockopt+0x1a/0x20 [<ffffffff9026b89d>] SyS_getsockopt+0x7d/0xf0 [<ffffffff903cbf92>] system_call_fastpath+0x25/0x2a Fixes: 656caff20e1 ("netfilter 04/09: x_tables: fix match/target revision lookup") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-02-28selftests: netfilter: test nat port clash resolution interaction with tcp ↵Florian Westphal
early demux Convert Antonio Ojeas bug reproducer to a kselftest. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-02-28netfilter: conntrack: avoid misleading 'invalid' in log messageFlorian Westphal
The packet is not flagged as invalid: conntrack will accept it and its associated with the conntrack entry. This happens e.g. when receiving a retransmitted SYN in SYN_RECV state. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-02-28netfilter: nf_nat: undo erroneous tcp edemux lookupFlorian Westphal
Under extremely rare conditions TCP early demux will retrieve the wrong socket. 1. local machine establishes a connection to a remote server, S, on port p. This gives: laddr:lport -> S:p ... both in tcp and conntrack. 2. local machine establishes a connection to host H, on port p2. 2a. TCP stack choses same laddr:lport, so we have laddr:lport -> H:p2 from TCP point of view. 2b). There is a destination NAT rewrite in place, translating H:p2 to S:p. This results in following conntrack entries: I) laddr:lport -> S:p (origin) S:p -> laddr:lport (reply) II) laddr:lport -> H:p2 (origin) S:p -> laddr:lport2 (reply) NAT engine has rewritten laddr:lport to laddr:lport2 to map the reply packet to the correct origin. When server sends SYN/ACK to laddr:lport2, the PREROUTING hook will undo-the SNAT transformation, rewriting IP header to S:p -> laddr:lport This causes TCP early demux to associate the skb with the TCP socket of the first connection. The INPUT hook will then reverse the DNAT transformation, rewriting the IP header to H:p2 -> laddr:lport. Because packet ends up with the wrong socket, the new connection never completes: originator stays in SYN_SENT and conntrack entry remains in SYN_RECV until timeout, and responder retransmits SYN/ACK until it gives up. To resolve this, orphan the skb after the input rewrite: Because the source IP address changed, the socket must be incorrect. We can't move the DNAT undo to prerouting due to backwards compatibility, doing so will make iptables/nftables rules to no longer match the way they did. After orphan, the packet will be handed to the next protocol layer (tcp, udp, ...) and that will repeat the socket lookup just like as if early demux was disabled. Fixes: 41063e9dd1195 ("ipv4: Early TCP socket demux.") Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1427 Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-02-28netfilter: conntrack: Remove a double space in a log messageKlemen Košir
Removed an extra space in a log message and an extra blank line in code. Signed-off-by: Klemen Košir <klemen.kosir@kream.io> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-02-28uapi: nfnetlink_cthelper.h: fix userspace compilation errorDmitry V. Levin
Apparently, <linux/netfilter/nfnetlink_cthelper.h> and <linux/netfilter/nfnetlink_acct.h> could not be included into the same compilation unit because of a cut-and-paste typo in the former header. Fixes: 12f7a505331e6 ("netfilter: add user-space connection tracking helper infrastructure") Cc: <stable@vger.kernel.org> # v3.6 Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-02-26Merge branch 'bnxt_en-error-recovery-bug-fixes'Jakub Kicinski
Michael Chan says: ==================== bnxt_en: Error recovery bug fixes. Two error recovery related bug fixes for 2 corner cases. Please queue patch #2 for -stable. Thanks. ==================== Link: https://lore.kernel.org/r/1614332590-17865-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-26bnxt_en: reliably allocate IRQ table on reset to avoid crashEdwin Peer
The following trace excerpt corresponds with a NULL pointer dereference of 'bp->irq_tbl' in bnxt_setup_inta() on an Aarch64 system after many device resets: Unable to handle kernel NULL pointer dereference at ... 000000d ... pc : string+0x3c/0x80 lr : vsnprintf+0x294/0x7e0 sp : ffff00000f61ba70 pstate : 20000145 x29: ffff00000f61ba70 x28: 000000000000000d x27: ffff0000009c8b5a x26: ffff00000f61bb80 x25: ffff0000009c8b5a x24: 0000000000000012 x23: 00000000ffffffe0 x22: ffff000008990428 x21: ffff00000f61bb80 x20: 000000000000000d x19: 000000000000001f x18: 0000000000000000 x17: 0000000000000000 x16: ffff800b6d0fb400 x15: 0000000000000000 x14: ffff800b7fe31ae8 x13: 00001ed16472c920 x12: ffff000008c6b1c9 x11: ffff000008cf0580 x10: ffff00000f61bb80 x9 : 00000000ffffffd8 x8 : 000000000000000c x7 : ffff800b684b8000 x6 : 0000000000000000 x5 : 0000000000000065 x4 : 0000000000000001 x3 : ffff0a00ffffff04 x2 : 000000000000001f x1 : 0000000000000000 x0 : 000000000000000d Call trace: string+0x3c/0x80 vsnprintf+0x294/0x7e0 snprintf+0x44/0x50 __bnxt_open_nic+0x34c/0x928 [bnxt_en] bnxt_open+0xe8/0x238 [bnxt_en] __dev_open+0xbc/0x130 __dev_change_flags+0x12c/0x168 dev_change_flags+0x20/0x60 ... Ordinarily, a call to bnxt_setup_inta() (not in trace due to inlining) would not be expected on a system supporting MSIX at all. However, if bnxt_init_int_mode() does not end up being called after the call to bnxt_clear_int_mode() in bnxt_fw_reset_close(), then the driver will think that only INTA is supported and bp->irq_tbl will be NULL, causing the above crash. In the error recovery scenario, we call bnxt_clear_int_mode() in bnxt_fw_reset_close() early in the sequence. Ordinarily, we will call bnxt_init_int_mode() in bnxt_hwrm_if_change() after we reestablish communication with the firmware after reset. However, if the sequence has to abort before we call bnxt_init_int_mode() and if the user later attempts to re-open the device, then it will cause the crash above. We fix it in 2 ways: 1. Check for bp->irq_tbl in bnxt_setup_int_mode(). If it is NULL, call bnxt_init_init_mode(). 2. If we need to abort in bnxt_hwrm_if_change() and cannot complete the error recovery sequence, set the BNXT_STATE_ABORT_ERR flag. This will cause more drastic recovery at the next attempt to re-open the device, including a call to bnxt_init_int_mode(). Fixes: 3bc7d4a352ef ("bnxt_en: Add BNXT_STATE_IN_FW_RESET state.") Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-26bnxt_en: Fix race between firmware reset and driver remove.Vasundhara Volam
The driver's error recovery reset sequence can take many seconds to complete and only the critical sections are protected by rtnl_lock. A recent change has introduced a regression in this sequence. bnxt_remove_one() may be called while the recovery is in progress. Normally, unregister_netdev() would cause bnxt_close_nic() to be called and this would cause the error recovery to safely abort with the BNXT_STATE_ABORT_ERR flag set in bnxt_close_nic(). Recently, we added bnxt_reinit_after_abort() to allow the user to reopen the device after an aborted recovery. This causes the regression in the scenario described above because we would attempt to re-open even after the netdev has been unregistered. Fix it by checking the netdev reg_state in bnxt_reinit_after_abort() and abort if it is unregistered. Fixes: 6882c36cf82e ("bnxt_en: attempt to reinitialize after aborted reset") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-26Merge branch 'mlxsw-various-fixes'Jakub Kicinski
Ido Schimmel says: ==================== mlxsw: Various fixes This patchset contains various fixes for mlxsw. Patch #1 fixes a race condition in a selftest. The race and fix are explained in detail in the changelog. Patch #2 re-adds a link mode that was wrongly removed, resulting in a regression in some setups. Patch #3 fixes a race condition in route installation with nexthop objects. Please consider patches #2 and #3 for stable. ==================== Link: https://lore.kernel.org/r/20210225165721.1322424-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-26mlxsw: spectrum_router: Ignore routes using a deleted nexthop objectIdo Schimmel
Routes are currently processed from a workqueue whereas nexthop objects are processed in system call context. This can result in the driver not finding a suitable nexthop group for a route and issuing a warning [1]. Fix this by ignoring such routes earlier in the process. The subsequent deletion notification will be ignored as well. [1] WARNING: CPU: 2 PID: 7754 at drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4853 mlxsw_sp_router_fib_event_work+0x1112/0x1e00 [mlxsw_spectrum] [...] CPU: 2 PID: 7754 Comm: kworker/u8:0 Not tainted 5.11.0-rc6-cq-20210207-1 #16 Hardware name: Mellanox Technologies Ltd. MSN2100/SA001390, BIOS 5.6.5 05/24/2018 Workqueue: mlxsw_core_ordered mlxsw_sp_router_fib_event_work [mlxsw_spectrum] RIP: 0010:mlxsw_sp_router_fib_event_work+0x1112/0x1e00 [mlxsw_spectrum] Fixes: cdd6cfc54c64 ("mlxsw: spectrum_router: Allow programming routes with nexthop objects") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reported-by: Alex Veber <alexve@nvidia.com> Tested-by: Alex Veber <alexve@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-26mlxsw: spectrum_ethtool: Add an external speed to PTYS registerDanielle Ratson
Currently, only external bits are added to the PTYS register, whereas there is one external bit that is wrongly marked as internal, and so was recently removed from the register. Add that bit to the PTYS register again, as this bit is no longer internal. Its removal resulted in '100000baseLR4_ER4/Full' link mode no longer being supported, causing a regression on some setups. Fixes: 5bf01b571cf4 ("mlxsw: spectrum_ethtool: Remove internal speeds from PTYS register") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reported-by: Eddie Shklaer <eddies@nvidia.com> Tested-by: Eddie Shklaer <eddies@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-26selftests: forwarding: Fix race condition in mirror installationDanielle Ratson
When mirroring to a gretap in hardware the device expects to be programmed with the egress port and all the encapsulating headers. This requires the driver to resolve the path the packet will take in the software data path and program the device accordingly. If the path cannot be resolved (in this case because of an unresolved neighbor), then mirror installation fails until the path is resolved. This results in a race that causes the test to sometimes fail. Fix this by setting the neighbor's state to permanent, so that it is always valid. Fixes: b5b029399fa6d ("selftests: forwarding: mirror_gre_bridge_1d_vlan: Add STP test") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-26tcp: Fix sign comparison bug in getsockopt(TCP_ZEROCOPY_RECEIVE)Arjun Roy
getsockopt(TCP_ZEROCOPY_RECEIVE) has a bug where we read a user-provided "len" field of type signed int, and then compare the value to the result of an "offsetofend" operation, which is unsigned. Negative values provided by the user will be promoted to large positive numbers; thus checking that len < offsetofend() will return false when the intention was that it return true. Note that while len is originally checked for negative values earlier on in do_tcp_getsockopt(), subsequent calls to get_user() re-read the value from userspace which may have changed in the meantime. Therefore, re-add the check for negative values after the call to get_user in the handler code for TCP_ZEROCOPY_RECEIVE. Fixes: c8856c051454 ("tcp-zerocopy: Return inq along with tcp receive zerocopy.") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Arjun Roy <arjunroy@google.com> Link: https://lore.kernel.org/r/20210225232628.4033281-1-arjunroy.kdev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-26net: fec: ptp: avoid register access when ipg clock is disabledHeiko Thiery
When accessing the timecounter register on an i.MX8MQ the kernel hangs. This is only the case when the interface is down. This can be reproduced by reading with 'phc_ctrl eth0 get'. Like described in the change in 91c0d987a9788dcc5fe26baafd73bf9242b68900 the igp clock is disabled when the interface is down and leads to a system hang. So we check if the ptp clock status before reading the timecounter register. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20210225211514.9115-1-heiko.thiery@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-26net: phy: make mdio_bus_phy_suspend/resume as __maybe_unusedArnd Bergmann
When CONFIG_PM_SLEEP is disabled, the compiler warns about unused functions: drivers/net/phy/phy_device.c:273:12: error: unused function 'mdio_bus_phy_suspend' [-Werror,-Wunused-function] static int mdio_bus_phy_suspend(struct device *dev) drivers/net/phy/phy_device.c:293:12: error: unused function 'mdio_bus_phy_resume' [-Werror,-Wunused-function] static int mdio_bus_phy_resume(struct device *dev) The logic is intentional, so just mark these two as __maybe_unused and remove the incorrect #ifdef. Fixes: 4c0d2e96ba05 ("net: phy: consider that suspend2ram may cut off PHY power") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210225145748.404410-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-26net: dsa: mt7530: don't build GPIO support if !GPIOLIBDENG Qingfang
The new GPIO support may be optional at runtime, but it requires building against gpiolib: ERROR: modpost: "gpiochip_get_data" [drivers/net/dsa/mt7530.ko] undefined! ERROR: modpost: "devm_gpiochip_add_data_with_key" [drivers/net/dsa/mt7530.ko] undefined! Add #ifdef to exclude GPIO support if GPIOLIB is not enabled. Fixes: 429a0edeefd8 ("net: dsa: mt7530: MT7530 optional GPIO support") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: DENG Qingfang <dqfext@gmail.com> Link: https://lore.kernel.org/r/20210226063226.8474-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-26net: dsa: tag_ocelot_8021q: fix driver dependencyArnd Bergmann
When the ocelot driver code is in a library, the dsa tag code cannot be built-in: ld.lld: error: undefined symbol: ocelot_can_inject >>> referenced by tag_ocelot_8021q.c >>> dsa/tag_ocelot_8021q.o:(ocelot_xmit) in archive net/built-in.a ld.lld: error: undefined symbol: ocelot_port_inject_frame >>> referenced by tag_ocelot_8021q.c >>> dsa/tag_ocelot_8021q.o:(ocelot_xmit) in archive net/built-in.a Building the tag support only really makes sense for compile-testing when the driver is available, so add a Kconfig dependency that prevents the broken configuration while allowing COMPILE_TEST alternative when MSCC_OCELOT_SWITCH_LIB is disabled entirely. This case is handled through the #ifdef check in include/soc/mscc/ocelot.h. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210225143910.3964364-2-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-26net: mscc: ocelot: select NET_DEVLINKArnd Bergmann
Without this option, the driver fails to link: ld.lld: error: undefined symbol: devlink_sb_register >>> referenced by ocelot_devlink.c >>> net/ethernet/mscc/ocelot_devlink.o:(ocelot_devlink_sb_register) in archive drivers/built-in.a >>> referenced by ocelot_devlink.c >>> net/ethernet/mscc/ocelot_devlink.o:(ocelot_devlink_sb_register) in archive drivers/built-in.a Fixes: f59fd9cab730 ("net: mscc: ocelot: configure watermarks using devlink-sb") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210225143910.3964364-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-26Merge branch 'ethernet-fixes-for-stmmac-driver'Jakub Kicinski
Joakim Zhang says: ==================== ethernet: fixes for stmmac driver Fixes for stmmac driver. --- ChangeLogs: V1->V2: * subject prefix: ethernet: stmmac: -> net: stmmac: * use dma_addr_t instead of unsigned int for physical address * use cpu_to_le32() V2->V3: * fix the build issue pointed out by kbuild bot. * add error handling for stmmac_reinit_rx_buffers() function. V3->V4: * remove patch (net: stmmac: remove redundant null check for ptp clock), reviewer thinks it should target net-next. V4->V5: * use %pad format to print dma_addr_t. * extend dwmac4_display_ring() to support all descriptor types. * while() -> do-while() ==================== Link: https://lore.kernel.org/r/20210225090114.17562-1-qiangqing.zhang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-26net: stmmac: re-init rx buffers when mac resume backJoakim Zhang
During suspend/resume stress test, we found descriptor write back by DMA could exhibit unusual behavior, e.g.: 003 [0xc4310030]: 0x0 0x40 0x0 0xb5010040 We can see that desc3 write back is 0xb5010040, it is still ownd by DMA, so application would not recycle this buffer. It will trigger fatal bus error when DMA try to use this descriptor again. To fix this issue, we should re-init all rx buffers when mac resume back. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 06:09:10 +0000