| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's quite a lot of small driver specific fixes and enhancements in
this release but the main activity has been around the loopback and
spidev test drivers which is good to see as it should hopefully help
improve the quality of all the drivers as people start to make use of
the new code:
- Additional tests in the loopback test driver for vmalloc()
compatibility and around delays together with fixes for existing
tests.
- Support for testing continuous data transfer for use in soak
testing.
- Device property support for board info platforms.
- Support for registering empty sets of devices via board info
(useful when writing code to enumerate hardware automatically)"
* tag 'spi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (52 commits)
spi: cadence: Allow for GPIO pins to be used as chipselects
spi-imx: Implements handling of the SPI_READY mode flag.
spi: tegra: fix spelling mistake: "trasfer" -> "transfer"
spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble
spi: Add can_dma like interface for spi_flash_read
spi: dw: Disable clock after unregistering the host
spi: double time out tolerance
spi: atmel: add deepest PM support to SAMA5D2
spi: atmel: factorize reusable code for SPI controller init
spi: orion: add LSB support
spi: pl022: don't use uninitialized variable
spi: loopback-test: fix spelling mistake: "minimam" -> "minimum"
spi: dynamycally allocated message initialization
spi: spi-ti-qspi: Remove unused dma_dev variable
spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer
spi: spi-ti-qspi: Use dma_engine wrapper for dma memcpy call
spi: spidev_test: add option to continuously transfer data
spi: loopback-test: fix potential integer overflow on multiple
spi: sun6i: update max transfer size reported
spi: pl022: Document property values
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Quite a lot going on with the regulator API for this release, much
more in the core than in the drivers for a change:
- Fixes for voltage change propagation through dumb power switches.
- A notification when regulators are enabled.
- A new settling time property for regulators where the time taken to
move to a new voltage is not related to the size of the change.
- Some reorganization of the Arizona drivers in preparation for
sharing the code with the next generation devices they've been
integrated with.
- Support for newer Freescale chips in the Anatop regulator.
- A new driver for voltage controlled regulators to cope with some
exciting ChromeOS hardware designs.
- Support for Rohm BD9571MWV-M and TI TPS65132"
* tag 'regulator-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (51 commits)
regulator: Add ROHM BD9571MWV-M PMIC regulator driver
regulator: arizona-ldo1: Factor out generic initialization
regulator: arizona-ldo1: Make arizona_ldo1 independent of struct arizona
regulator: arizona-ldo1: Move pdata into a separate structure
regulator: arizona-micsupp: Factor out generic initialization
regulator: arizona-micsupp: Make arizona_micsupp independent of struct arizona
regulator: arizona-micsupp: Move pdata into a separate structure
regulator: arizona: Split KConfig options for LDO1 and MICSUPP regulators
regulator: anatop: make regulator name property required
regulator: tps65023: Fix inverted core enable logic.
regulator: anatop: make sure regulator name is properly defined
regulator: core: Allow dummy regulators for supplies
regulator: core: Only propagate voltage changes to if it can change voltages
regulator: vctrl: Fix out of bounds array access for vctrl->vtable
regulator: tps65132: fix platform_no_drv_owner.cocci warnings
regulator: tps65132: Fix off-by-one for .max_register setting
regulator: anatop: set default voltage selector for pcie
regulator: tps65132: add device-tree binding
regulator: tps65132: add regulator driver for TI TPS65132
regulator: anatop: remove unneeded name field of struct anatop_regulator
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wilfram Sang:
"I2C has the following updates for you:
- an immutable cross-subsystem branch fixing PMIC access on Intel
Baytrail
- bigger driver updates to the designware, meson, exynos5 drivers
- new i2c_acpi_new_device() function to create devices from ACPI
- struct i2c_driver has now a flag 'disable_i2c_core_irq_mapping' to
allow custom IRQ mapping in case the default does not fit
- mux subsystem centralized error messages in its core
- new driver for ltc4306 i2c mux
- usual set of small updates"
* 'i2c/for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (44 commits)
i2c: thunderx: Enable HWMON class probing
i2c: rcar: clarify PM handling with more comments
i2c: rcar: fix resume by always initializing registers before transfer
i2c: tegra: fix spelling mistake: "contoller" -> "controller"
i2c: exynos5: use core helper to get driver data
i2c: exynos5: de-duplicate error logs on clock setup
i2c: exynos5: simplify clock frequency handling
i2c: exynos5: simplify timings calculation
i2c: designware-baytrail: fix potential null pointer dereference on dev
i2c: designware: Get selected speed mode sda-hold-time via ACPI
[media] cx231xx: stop double error reporting
i2c: core: Allow drivers to disable i2c-core irq mapping
i2c: core: Add new i2c_acpi_new_device helper function
i2c: core: Allow getting ACPI info by index
i2c: img-scb: use setup_timer
i2c: i2c-scmi: add a MS HID
i2c: mux: ltc4306: LTC4306 and LTC4305 I2C multiplexer/switch
dt-bindings: i2c: mux: ltc4306: Add dt-bindings for I2C multiplexer/switch
i2c: mux: reg: stop double error reporting
i2c: mux: pinctrl: stop double error reporting
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Freescale MXS Low Resolution ADC
- Freescale i.MX23/i.MX28 LRADC touchscreen
- Motorola CPCAP Power Button
- TI LMU (Lighting Management Unit)
- Atmel SMC (Static Memory Controller)
New Device Support:
- Add support for X-Powers AXP803 to axp20x
- Add support for Dialog Semi DA9061 to da9062-core
- Add support for Intel Cougar Mountain to lpc_ich
- Add support for Intel Gemini Lake to lpc_ich
New Functionality:
- Add Device Tree support; wm831x-*, axp20x, ti-lmu, da9062, sun4i-gpadc
- Add IRQ sense support; motorola-cpcap
- Add ACPI support; cros_ec
- Add Reset support; altera-a10sr
- Add ADC support; axp20x
- Add AC Power support; axp20x
- Add Runtime PM support; atmel-ebi, exynos-lpass
- Add Battery Power Supply support; axp20x
- Add Clock support; exynos-lpass, hi655x-pmic
Fix-ups:
- Implicitly specify required headers; motorola-cpcap, intel_soc_pmic_bxtwc
- Add .remove() method; stm32-timers, exynos-lpass
- Remove unused code; intel_soc_pmic_core, intel-lpss-acpi, ipaq-micro, atmel-smc, menelaus
- Rename variables for clarity; axp20x
- Convert pr_warning() to pr_warn(); db8500-prcmu, sta2x11-mfd, twl4030-power
- Improve formatting; arizona-core, axp20x
- Use raw_spinlock_*() variants; asic3, t7l66xb, tc6393xb
- Simplify/refactor code; arizona-core, atmel-ebi
- Improve error checking; intel_soc_pmic_core
Bug Fixes:
- Ensure OMAP3630/3730 boards can successfully reboot; twl4030-power
- Correct max-register value; stm32-timers
- Extend timeout to account for clock stretching; cros_ec_spi
- Use correct IRQ trigger type; motorola-cpcap
- Fix bad use of IRQ sense register; motorola-cpcap
- Logic error "||" should be "&&"; mxs-lradc-ts"
* tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits)
input: touchscreen: mxs-lradc: || vs && typos
dt-bindings: Add AXP803's regulator info
mfd: axp20x: Support AXP803 variant
dt-bindings: Add device tree binding for X-Powers AXP803 PMIC
dt-bindings: Make AXP20X compatible strings one per line
mfd: intel_soc_pmic_core: Fix unchecked return value
mfd: menelaus: Remove obsolete local_irq_disable() and local_irq_enable()
mfd: omap-usb-tll: Configure ULPIAUTOIDLE
mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
mfd: palmas: Fixed spelling mistake in error message
mfd: lpc_ich: Add support for Intel Gemini Lake SoC
mfd: hi655x: Add the clock cell to provide WiFi and Bluetooth
mfd: intel_soc_pmic: Fix a mess with compilation units
mfd: exynos-lpass: Add runtime PM support
mfd: exynos-lpass: Add missing remove() function
mfd: exynos-lpass: Add support for clocks
mfd: exynos-lpass: Remove pad retention control
iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
mfd: cpcap: Fix bad use of IRQ sense register
mfd: cpcap: Use ack_invert interrupts
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight update from Lee Jones:
"New Arctic Sand ARC2C0608 LED Backlight driver"
* tag 'backlight-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: Add support for Arctic Sand LED backlight driver chips
dt-bindings: backlight: arcxcnn: Supply bindings for Arctic Sand backlight
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a relatively calm development cycle, and no scaring changes are
seen in both core and driver sides. Here are some highlights:
ASoC:
- A new API for hooking up jacks more generically and easily
- Card longname is set based on DMI for a unique UCM profile
- Lots of Intel driver fixes: Atom, Broxton, Skylake and newer chips
- New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132,
HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960,
Nuvoton NAU8824, Odroid systems, ST STM32 SAI controllers and x86
systems with DA7213
HD-audio:
- Many new quirks to support headset for various devices (mostly ASUS
ones) as usual
- Support for dual codecs on some Gigabyte mobos and Lenovo laptop
- Improvement on PCM position reporting for Skylake and newer
FireWire:
- New drivers for MOTU and RME Fireface series
- Updates for Digidesign Digi00x and TASCAM series
- Support for tracepoints
Others:
- USB-audio: improved support for quirk_alias option
- Cleanups, constification allover the places"
* tag 'sound-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (299 commits)
ASoC: codec: wm8960: Relax bit clock computation when using PLL
ASoC: codec: wm9860: avoid maybe-uninitialized warning
ASoC: nau8824: leave Class D gain at chip default
ASoC: nau8824: rename controls to match DAPM controls
ASoC: Intel: Skylake: Return negative error code
ASoC: Intel: Skylake: Fix unused variable warning
ASoC: Intel: Skylake: fix uninitialized pointer use
ASoC: sti: Fix error handling if of_clk_get() fails
ASoC: cs4271: configure reset GPIO as output
ASoC: dwc: Disallow building designware_pcm as a module
ALSA: ali5451: fix spelling mistake in "ali_capture_preapre"
ASoC: stm32: add SAI driver
ASoC: stm32: add bindings for SAI
ASoC: Intel: Skylake: Add loadable module support on KBL platform
ASoC: Intel: Skylake: Modify load_lib_ipc arguments for a nowait version
ASoC: Intel: Skylake: Register dsp_fw_ops for kabylake
ASoC: Intel: Skylake: Modify arguments to reuse module transfer function
ASoC: Intel: Skylake: Commonize library load
ASoC: Intel: Skylake: Move sst common initialization to a helper function
ASoC: nau8824: new driver
...
|
|
Pull drm u pdates from Dave Airlie:
"This is the main drm pull request for v4.12. Apart from two fixes
pulls, everything should have been in drm-next for at least 2 weeks.
The biggest thing in here is AMD released the public headers for their
upcoming VEGA GPUs. These as always are quite a sizeable chunk of
header files. They've also added initial non-display support for those
GPUs, though they aren't available in production yet.
Otherwise it's pretty much normal.
New bridge drivers:
- megachips-stdpxxxx-ge-b850v3-fw LVDS->DP++
- generic LVDS bridge support.
Core:
- Displayport link train failure reporting to userspace
- debugfs interface cleaned up
- subsystem TODO in kerneldoc now
- Extended fbdev support (flipping and vblank wait)
- drm_platform removed
- EDP CRC support in helper
- HF-VSDB SCDC support in EDID parser
- Lots of code cleanups and header extraction
- Thunderbolt external GPU awareness
- Atomic helper improvements
- Documentation improvements
panel:
- Sitronix and Samsung new panel support
amdgpu:
- Preliminary vega10 support
- Multi-level page table support
- GPU sensor support for userspace
- PRT support for sparse buffers
- SR-IOV improvements
- Non-contig VRAM CPU mapping
i915:
- Atomic modesetting enabled by default on Gen5+
- LSPCON improvements
- Atomic state handling for cdclk
- GPU reset improvements
- In-kernel unit tests
- Geminilake improvements and color manager support
- Designware i2c fixes
- vblank evasion improvements
- Hotplug safe connector iterators
- GVT scheduler QoS support
- GVT Kabylake support
nouveau:
- Acceleration support for Pascal (GP10x).
- Rearchitecture of code handling proprietary signed firmware
- Fix GTX 970 with odd MMU configuration
- GP10B support
- GP107 acceleration support
vmwgfx:
- Atomic modesetting support for vmwgfx
omapdrm:
- Support for render nodes
- Refactor omapdss code
- Fix some probe ordering issues
- Fix too dark RGB565 rendering
sunxi:
- prelim rework for multiple pipes.
mali-dp:
- Color management support
- Plane scaling
- Power management improvements
imx-drm:
- Prefetch Resolve Engine/Gasket on i.MX6QP
- Deferred plane disabling
- Separate alpha support
mediatek:
- Mediatek SoC MT2701 support
rcar-du:
- Gen3 HDMI support
msm:
- 4k support for newer chips
- OPP bindings for gpu
- prep work for per-process pagetables
vc4:
- HDMI audio support
- fixes
qxl:
- minor fixes.
dw-hdmi:
- PHY improvements
- CSC fixes
- Amlogic GX SoC support"
* tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux: (1778 commits)
drm/nouveau/fb/gf100-: Fix 32 bit wraparound in new ram detection
drm/nouveau/secboot/gm20b: fix the error return code in gm20b_secboot_tegra_read_wpr()
drm/nouveau/kms: Increase max retries in scanout position queries.
drm/nouveau/bios/bitP: check that table is long enough for optional pointers
drm/nouveau/fifo/nv40: no ctxsw for pre-nv44 mpeg engine
drm: mali-dp: use div_u64 for expensive 64-bit divisions
drm/i915: Confirm the request is still active before adding it to the await
drm/i915: Avoid busy-spinning on VLV_GLTC_PW_STATUS mmio
drm/i915/selftests: Allocate inode/file dynamically
drm/i915: Fix system hang with EI UP masked on Haswell
drm/i915: checking for NULL instead of IS_ERR() in mock selftests
drm/i915: Perform link quality check unconditionally during long pulse
drm/i915: Fix use after free in lpe_audio_platdev_destroy()
drm/i915: Use the right mapping_gfp_mask for final shmem allocation
drm/i915: Make legacy cursor updates more unsynced
drm/i915: Apply a cond_resched() to the saturated signaler
drm/i915: Park the signaler before sleeping
drm: mali-dp: Check the mclk rate and allow up/down scaling
drm: mali-dp: Enable image enhancement when scaling
drm: mali-dp: Add plane upscaling support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota, reiserfs, udf and ext2 updates from Jan Kara:
"The branch contains changes to quota code so that it does not modify
persistent flags in inode->i_flags (it was the only place in kernel
doing that) and handle it inside filesystem's quotaon/off handlers
instead.
The branch also contains two UDF cleanups, a couple of reiserfs fixes
and one fix for ext2 quota locking"
* 'generic' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext4: Improve comments in ext4_quota_{on|off}()
udf: use kmap_atomic for memcpy copying
udf: use octal for permissions
quota: Remove dquot_quotactl_ops
reiserfs: Remove i_attrs_to_sd_attrs()
reiserfs: Remove useless setting of i_flags
jfs: Remove jfs_get_inode_flags()
ext2: Remove ext2_get_inode_flags()
ext4: Remove ext4_get_inode_flags()
quota: Stop setting IMMUTABLE and NOATIME flags on quota files
jfs: Set flags on quota files directly
ext2: Set flags on quota files directly
reiserfs: Set flags on quota files directly
ext4: Set flags on quota files directly
reiserfs: Protect dquot_writeback_dquots() by s_umount semaphore
reiserfs: Make cancel_old_flush() reliable
ext2: Call dquot_writeback_dquots() with s_umount held
reiserfs: avoid a -Wmaybe-uninitialized warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"The branch contains mainly a rework of fsnotify infrastructure fixing
a shortcoming that we have waited for response to fanotify permission
events with SRCU read lock held and when the process consuming events
was slow to respond the kernel has stalled.
It also contains several cleanups of unnecessary indirections in
fsnotify framework and a bugfix from Amir fixing leakage of kernel
internal errno to userspace"
* 'fsnotify' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (37 commits)
fanotify: don't expose EOPENSTALE to userspace
fsnotify: remove a stray unlock
fsnotify: Move ->free_mark callback to fsnotify_ops
fsnotify: Add group pointer in fsnotify_init_mark()
fsnotify: Drop inode_mark.c
fsnotify: Remove fsnotify_find_{inode|vfsmount}_mark()
fsnotify: Remove fsnotify_detach_group_marks()
fsnotify: Rename fsnotify_clear_marks_by_group_flags()
fsnotify: Inline fsnotify_clear_{inode|vfsmount}_mark_group()
fsnotify: Remove fsnotify_recalc_{inode|vfsmount}_mask()
fsnotify: Remove fsnotify_set_mark_{,ignored_}mask_locked()
fanotify: Release SRCU lock when waiting for userspace response
fsnotify: Pass fsnotify_iter_info into handle_event handler
fsnotify: Provide framework for dropping SRCU lock in ->handle_event
fsnotify: Remove special handling of mark destruction on group shutdown
fsnotify: Detach mark from object list when last reference is dropped
fsnotify: Move queueing of mark for destruction into fsnotify_put_mark()
inotify: Do not drop mark reference under idr_lock
fsnotify: Free fsnotify_mark_connector when there is no mark attached
fsnotify: Lock object list with connector lock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull additional device mapper updates from Mike Snitzer:
"Here are some changes from Christoph that needed to be rebased ontop
of changes that were already merged into the device mapper tree. In
addition, these changes depend on the 'for-4.12/block' changes that
you've already merged.
- Cleanups to request-based DM and DM multipath from Christoph that
prepare for his block core error code type checking improvements"
* tag 'for-4.12/dm-post-merge-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: introduce a new DM_MAPIO_KILL return value
dm rq: change ->rq_end_io calling conventions
dm mpath: merge do_end_io into multipath_end_io
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- A major update for DM cache that reduces the latency for deciding
whether blocks should migrate to/from the cache. The bio-prison-v2
interface supports this improvement by enabling direct dispatch of
work to workqueues rather than having to delay the actual work
dispatch to the DM cache core. So the dm-cache policies are much more
nimble by being able to drive IO as they see fit. One immediate
benefit from the improved latency is a cache that should be much more
adaptive to changing workloads.
- Add a new DM integrity target that emulates a block device that has
additional per-sector tags that can be used for storing integrity
information.
- Add a new authenticated encryption feature to the DM crypt target
that builds on the capabilities provided by the DM integrity target.
- Add MD interface for switching the raid4/5/6 journal mode and update
the DM raid target to use it to enable aid4/5/6 journal write-back
support.
- Switch the DM verity target over to using the asynchronous hash
crypto API (this helps work better with architectures that have
access to off-CPU algorithm providers, which should reduce CPU
utilization).
- Various request-based DM and DM multipath fixes and improvements from
Bart and Christoph.
- A DM thinp target fix for a bio structure leak that occurs for each
discard IFF discard passdown is enabled.
- A fix for a possible deadlock in DM bufio and a fix to re-check the
new buffer allocation watermark in the face of competing admin
changes to the 'max_cache_size_bytes' tunable.
- A couple DM core cleanups.
* tag 'for-4.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (50 commits)
dm bufio: check new buffer allocation watermark every 30 seconds
dm bufio: avoid a possible ABBA deadlock
dm mpath: make it easier to detect unintended I/O request flushes
dm mpath: cleanup QUEUE_IF_NO_PATH bit manipulation by introducing assign_bit()
dm mpath: micro-optimize the hot path relative to MPATHF_QUEUE_IF_NO_PATH
dm: introduce enum dm_queue_mode to cleanup related code
dm mpath: verify __pg_init_all_paths locking assumptions at runtime
dm: verify suspend_locking assumptions at runtime
dm block manager: remove an unused argument from dm_block_manager_create()
dm rq: check blk_mq_register_dev() return value in dm_mq_init_request_queue()
dm mpath: delay requeuing while path initialization is in progress
dm mpath: avoid that path removal can trigger an infinite loop
dm mpath: split and rename activate_path() to prepare for its expanded use
dm ioctl: prevent stack leak in dm ioctl call
dm integrity: use previously calculated log2 of sectors_per_block
dm integrity: use hex2bin instead of open-coded variant
dm crypt: replace custom implementation of hex2bin()
dm crypt: remove obsolete references to per-CPU state
dm verity: switch to using asynchronous hash crypto API
dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shli/md
Pull MD updates from Shaohua Li:
- Add Partial Parity Log (ppl) feature found in Intel IMSM raid array
by Artur Paszkiewicz. This feature is another way to close RAID5
writehole. The Linux implementation is also available for normal
RAID5 array if specific superblock bit is set.
- A number of md-cluser fixes and enabling md-cluster array resize from
Guoqing Jiang
- A bunch of patches from Ming Lei and Neil Brown to rewrite MD bio
handling related code. Now MD doesn't directly access bio bvec,
bi_phys_segments and uses modern bio API for bio split.
- Improve RAID5 IO pattern to improve performance for hard disk based
RAID5/6 from me.
- Several patches from Song Liu to speed up raid5-cache recovery and
allow raid5 cache feature disabling in runtime.
- Fix a performance regression in raid1 resync from Xiao Ni.
- Other cleanup and fixes from various people.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (84 commits)
md/raid10: skip spare disk as 'first' disk
md/raid1: Use a new variable to count flighting sync requests
md: clear WantReplacement once disk is removed
md/raid1/10: remove unused queue
md: handle read-only member devices better.
md/raid10: wait up frozen array in handle_write_completed
uapi: fix linux/raid/md_p.h userspace compilation error
md-cluster: Fix a memleak in an error handling path
md: support disabling of create-on-open semantics.
md: allow creation of mdNNN arrays via md_mod/parameters/new_array
raid5-ppl: use a single mempool for ppl_io_unit and header_page
md/raid0: fix up bio splitting.
md/linear: improve bio splitting.
md/raid5: make chunk_aligned_read() split bios more cleanly.
md/raid10: simplify handle_read_error()
md/raid10: simplify the splitting of requests.
md/raid1: factor out flush_bio_list()
md/raid1: simplify handle_read_error().
Revert "block: introduce bio_copy_data_partial"
md/raid1: simplify alloc_behind_master_bio()
...
|
|
Pull audit updates from Paul Moore:
"Fourteen audit patches for v4.12 that span the full range of fixes,
new features, and internal cleanups.
We have a patches to move to 64-bit timestamps, convert refcounts from
atomic_t to refcount_t, track PIDs using the pid struct instead of
pid_t, convert our own private audit buffer cache to a standard
kmem_cache, log kernel module names when they are unloaded, and
normalize the NETFILTER_PKT to make the userspace folks happier.
From a fixes perspective, the most important is likely the auditd
connection tracking RCU fix; it was a rather brain dead bug that I'll
take the blame for, but thankfully it didn't seem to affect many
people (only one report).
I think the patch subject lines and commit descriptions do a pretty
good job of explaining the details and why the changes are important
so I'll point you there instead of duplicating it here; as usual, if
you have any questions you know where to find us.
We also manage to take out more code than we put in this time, that
always makes me happy :)"
* 'stable-4.12' of git://git.infradead.org/users/pcmoore/audit:
audit: fix the RCU locking for the auditd_connection structure
audit: use kmem_cache to manage the audit_buffer cache
audit: Use timespec64 to represent audit timestamps
audit: store the auditd PID as a pid struct instead of pid_t
audit: kernel generated netlink traffic should have a portid of 0
audit: combine audit_receive() and audit_receive_skb()
audit: convert audit_watch.count from atomic_t to refcount_t
audit: convert audit_tree.count from atomic_t to refcount_t
audit: normalize NETFILTER_PKT
netfilter: use consistent ipv4 network offset in xt_AUDIT
audit: log module name on delete_module
audit: remove unnecessary semicolon in audit_watch_handle_event()
audit: remove unnecessary semicolon in audit_mark_handle_event()
audit: remove unnecessary semicolon in audit_field_valid()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
"Highlights:
IMA:
- provide ">" and "<" operators for fowner/uid/euid rules
KEYS:
- add a system blacklist keyring
- add KEYCTL_RESTRICT_KEYRING, exposes keyring link restriction
functionality to userland via keyctl()
LSM:
- harden LSM API with __ro_after_init
- add prlmit security hook, implement for SELinux
- revive security_task_alloc hook
TPM:
- implement contextual TPM command 'spaces'"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (98 commits)
tpm: Fix reference count to main device
tpm_tis: convert to using locality callbacks
tpm: fix handling of the TPM 2.0 event logs
tpm_crb: remove a cruft constant
keys: select CONFIG_CRYPTO when selecting DH / KDF
apparmor: Make path_max parameter readonly
apparmor: fix parameters so that the permission test is bypassed at boot
apparmor: fix invalid reference to index variable of iterator line 836
apparmor: use SHASH_DESC_ON_STACK
security/apparmor/lsm.c: set debug messages
apparmor: fix boolreturn.cocci warnings
Smack: Use GFP_KERNEL for smk_netlbl_mls().
smack: fix double free in smack_parse_opts_str()
KEYS: add SP800-56A KDF support for DH
KEYS: Keyring asymmetric key restrict method with chaining
KEYS: Restrict asymmetric key linkage using a specific keychain
KEYS: Add a lookup_restriction function for the asymmetric key type
KEYS: Add KEYCTL_RESTRICT_KEYRING
KEYS: Consistent ordering for __key_link_begin and restrict check
KEYS: Add an optional lookup_restriction hook to key_type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
tty: fix comment for __tty_alloc_driver()
init/main: properly align the multi-line comment
init/main: Fix double "the" in comment
Fix dead URLs to ftp.kernel.org
drivers: Clean up duplicated email address
treewide: Fix typo in xml/driver-api/basics.xml
tools/testing/selftests/powerpc: remove redundant CFLAGS in Makefile: "-Wall -O2 -Wall" -> "-O2 -Wall"
selftests/timers: Spelling s/privledges/privileges/
HID: picoLCD: Spelling s/REPORT_WRTIE_MEMORY/REPORT_WRITE_MEMORY/
net: phy: dp83848: Fix Typo
UBI: Fix typos
Documentation: ftrace.txt: Correct nice value of 120 priority
net: fec: Fix typo in error msg and comment
treewide: Fix typos in printk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatch updates from Jiri Kosina:
- a per-task consistency model is being added for architectures that
support reliable stack dumping (extending this, currently rather
trivial set, is currently in the works).
This extends the nature of the types of patches that can be applied
by live patching infrastructure. The code stems from the design
proposal made [1] back in November 2014. It's a hybrid of SUSE's
kGraft and RH's kpatch, combining advantages of both: it uses
kGraft's per-task consistency and syscall barrier switching combined
with kpatch's stack trace switching. There are also a number of
fallback options which make it quite flexible.
Most of the heavy lifting done by Josh Poimboeuf with help from
Miroslav Benes and Petr Mladek
[1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz
- module load time patch optimization from Zhou Chengming
- a few assorted small fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: add missing printk newlines
livepatch: Cancel transition a safe way for immediate patches
livepatch: Reduce the time of finding module symbols
livepatch: make klp_mutex proper part of API
livepatch: allow removal of a disabled patch
livepatch: add /proc/<pid>/patch_state
livepatch: change to a per-task consistency model
livepatch: store function sizes
livepatch: use kstrtobool() in enabled_store()
livepatch: move patching functions into patch.c
livepatch: remove unnecessary object loaded check
livepatch: separate enabled and patched states
livepatch/s390: add TIF_PATCH_PENDING thread flag
livepatch/s390: reorganize TIF thread flag bits
livepatch/powerpc: add TIF_PATCH_PENDING thread flag
livepatch/x86: add TIF_PATCH_PENDING thread flag
livepatch: create temporary klp_update_patch_state() stub
x86/entry: define _TIF_ALLWORK_MASK flags explicitly
stacktrace/x86: add function for detecting reliable stack traces
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID subsystem updates from Jiri Kosina:
- The need for HID_QUIRK_NO_INIT_REPORTS per-device quirk has been
growing dramatically during past years, so the time has come to
switch over the default, and perform the pro-active reading only in
cases where it's really needed (multitouch, wacom).
The only place where this behavior is (in some form) preserved is
hiddev so that we don't introduce userspace-visible change of
behavior.
From Benjamin Tissoires
- HID++ support for power_supply / baterry reporting.
From Benjamin Tissoires and Bastien Nocera
- Vast improvements / rework of DS3 and DS4 in Sony driver.
From Roderick Colenbrander
- Improvment (in terms of getting closer to the Microsoft's
interpretation of slightly ambiguous specification) of logical range
interpretation in case null-state is set in the rdesc.
From Valtteri Heikkilä and Tomasz Kramkowski
- A lot of newly supported device IDs and small assorted fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (71 commits)
HID: usbhid: Add HID_QUIRK_NOGET for Aten CS-1758 KVM switch
HID: asus: support backlight on USB keyboards
HID: wacom: Move wacom_remote_irq and wacom_remote_status_irq
HID: wacom: generic: sync pad events only for actual packets
HID: sony: remove redundant check for -ve err
HID: sony: Make sure to unregister sensors on failure
HID: sony: Make DS4 bt poll interval adjustable
HID: sony: Set proper bit flags on DS4 output report
HID: sony: DS4 use brighter LED colors
HID: sony: Improve navigation controller axis/button mapping
HID: sony: Use DS3 MAC address as unique identifier on USB
HID: logitech-hidpp: add a sysfs file to tell we support power_supply
HID: logitech-hidpp: enable HID++ 1.0 battery reporting
HID: logitech-hidpp: add support for battery status for the K750
HID: logitech-hidpp: battery: provide CAPACITY_LEVEL
HID: logitech-hidpp: rename battery level into capacity
HID: logitech-hidpp: battery: provide ONLINE property
HID: logitech-hidpp: notify battery on connect
HID: logitech-hidpp: return an error if the queried feature is not present
HID: logitech-hidpp: create the battery for all types of HID++ devices
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v4.12 cycle.
The extra week before the merge window actually resulted in some of
the type of fixes that usually arrive after the merge window already
starting to trickle in from eager developers using -next, I'm
impressed.
I have recruited a Samsung subsubsystem maintainer (Krzysztof) to deal
with the onset of Samsung patches. It works great.
Apart from that it is a boring round, just incremental updates and
fixes all over the place, no serious core changes or anything exciting
like that. The most pleasing to see is Julia Cartwrights work to audit
the irqchip-providing drivers for realtime locking compliance. It's
one of those "I should really get around to looking into that" things
that have been on my TODO list since forever.
Summary:
Core changes:
- add bi-directional and output-enable pin configurations to the
generic bindings and generic pin controlling core.
New drivers or subdrivers:
- Armada 37xx SoC pin controller and GPIO support.
- Axis ARTPEC-6 SoC pin controller support.
- AllWinner A64 R_PIO controller support, and opening up the
AllWinner sunxi driver for ARM64 use.
- Rockchip RK3328 support.
- Renesas R-Car H3 ES2.0 support.
- STM32F469 support in the STM32 driver.
- Aspeed G4 and G5 pin controller support.
Improvements:
- a whole slew of realtime improvements to drivers implementing
irqchips: BCM, AMD, SiRF, sunxi, rockchip.
- switch meson driver to get the GPIO ranges from the device tree.
- input schmitt trigger support on the Rockchip driver.
- enable the sunxi (AllWinner) driver to also be used on ARM64
silicon.
- name the Qualcomm QDF2xxx GPIO lines.
- support GMMR GPIO regions on the Intel Cherryview. This fixes a
serialization problem on these platforms.
- pad retention support for the Samsung Exynos 5433.
- handle suspend-to-ram in the AT91-pio4 driver.
- pin configuration support in the Aspeed driver.
Cleanups:
- the final name of Rockchip RK1108 was RV1108 so rename the driver
and variables to stay consistent"
* tag 'pinctrl-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl: mediatek: Add missing pinctrl bindings for mt7623
pinctrl: artpec6: Fix return value check in artpec6_pmx_probe()
pinctrl: artpec6: Remove .owner field for driver
pinctrl: tegra: xusb: Silence sparse warnings
ARM: at91/at91-pinctrl documentation: fix spelling mistake: "contoller" -> "controller"
pinctrl: make artpec6 explicitly non-modular
pinctrl: aspeed: g5: Add pinconf support
pinctrl: aspeed: g4: Add pinconf support
pinctrl: aspeed: Add core pinconf support
pinctrl: aspeed: Document pinconf in devicetree bindings
pinctrl: Add st,stm32f469-pinctrl compatible to stm32-pinctrl
pinctrl: stm32: Add STM32F469 MCU support
Documentation: dt: Remove ngpios from stm32-pinctrl binding
pinctrl: stm32: replace device_initcall() with arch_initcall()
pinctrl: stm32: add possibility to use gpio-ranges to declare bank range
pinctrl: armada-37xx: Add gpio support
pinctrl: armada-37xx: Add pin controller support for Armada 37xx
pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers
pinctrl: core: Make pinctrl_init_controller() static
pinctrl: generic: Add bi-directional and output-enable
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Continue to re-factor code to prepare for eMMC CMDQ and blkmq support
- Introduce queue semantics to prepare for eMMC CMDQ and blkmq support
- Add helper functions to manage temporary enable/disable of eMMC CMDQ
- Improve wait-busy detection for SDIO
MMC host:
- cavium: Add driver to support Cavium controllers
- cavium: Extend Cavium driver to support Octeon and ThunderX SOCs
- bcm2835: Add new driver for Broadcom BCM2835 controller
- sdhci-xenon: Add driver to support Marvell Xenon SDHCI controller
- sdhci-tegra: Add support for the Tegra186 variant
- sdhci-of-esdhc: Support for UHS-I SD cards
- sdhci-of-esdhc: Support for eMMC HS200 cards
- sdhci-cadence: Add eMMC HS400 enhanced strobe support
- sdhci-esdhc-imx: Reset tuning circuit when needed
- sdhci-pci: Modernize and clean-up some PM related code
- sdhci-pci: Avoid re-tuning at runtime PM for some Intel devices
- sdhci-pci|acpi: Use aggressive PM for some Intel BYT controllers
- sdhci: Re-factoring and modernizations
- sdhci: Optimize delay loops
- sdhci: Improve register dump print format
- sdhci: Add support for the Command Queue Engine
- meson-gx: Various improvements and clean-ups
- meson-gx: Add support for CMD23
- meson-gx: Basic tuning support to avoid CRC errors
- s3cmci: Enable probing via DT
- mediatek: Improve tuning support for eMMC HS200 and HS400 mode
- tmio: Improve DMA support
- tmio: Use correct response for CMD12
- dw_mmc: Minor improvements and clean-ups"
* tag 'mmc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (148 commits)
mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a
mmc: sdhci-of-esdhc: poll ESDHC_CLOCK_STABLE bit with udelay
mmc: sdhci-xenon: Fix default value of LOGIC_TIMING_ADJUST for eMMC5.0 PHY
mmc: sdhci-xenon: Fix the work flow in xenon_remove().
MIPS: Octeon: cavium_octeon_defconfig: Enable Octeon MMC
mmc: sdhci-xenon: Remove redundant dev_err call in get_dt_pad_ctrl_data()
mmc: cavium: Use module_pci_driver to simplify the code
mmc: cavium: Add MMC support for Octeon SOCs.
mmc: cavium: Fix detection of block or byte addressing.
mmc: core: Export API to allow hosts to get the card address
mmc: sdio: Fix sdio wait busy implement limitation
mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card
clk: apn806: fix spelling mistake: "mising" -> "missing"
mmc: sdhci-of-esdhc: add delay between tuning cycles
mmc: sdhci: Control the delay between tuning commands
mmc: sdhci-of-esdhc: add tuning support
mmc: sdhci-of-esdhc: add support for signal voltage switch
mmc: sdhci-of-esdhc: add peripheral clock support
mmc: sdhci-pci: Allow for 3 bytes from Intel DSM
mmc: cavium: Fix a shift wrapping bug
...
|
|
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.12:
API:
- Add batch registration for acomp/scomp
- Change acomp testing to non-unique compressed result
- Extend algorithm name limit to 128 bytes
- Require setkey before accept(2) in algif_aead
Algorithms:
- Add support for deflate rfc1950 (zlib)
Drivers:
- Add accelerated crct10dif for powerpc
- Add crc32 in stm32
- Add sha384/sha512 in ccp
- Add 3des/gcm(aes) for v5 devices in ccp
- Add Queue Interface (QI) backend support in caam
- Add new Exynos RNG driver
- Add ThunderX ZIP driver
- Add driver for hardware random generator on MT7623 SoC"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits)
crypto: stm32 - Fix OF module alias information
crypto: algif_aead - Require setkey before accept(2)
crypto: scomp - add support for deflate rfc1950 (zlib)
crypto: scomp - allow registration of multiple scomps
crypto: ccp - Change ISR handler method for a v5 CCP
crypto: ccp - Change ISR handler method for a v3 CCP
crypto: crypto4xx - rename ce_ring_contol to ce_ring_control
crypto: testmgr - Allow ecb(cipher_null) in FIPS mode
Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT"
crypto: ccp - Disable interrupts early on unload
crypto: ccp - Use only the relevant interrupt bits
hwrng: mtk - Add driver for hardware random generator on MT7623 SoC
dt-bindings: hwrng: Add Mediatek hardware random generator bindings
crypto: crct10dif-vpmsum - Fix missing preempt_disable()
crypto: testmgr - replace compression known answer test
crypto: acomp - allow registration of multiple acomps
hwrng: n2 - Use devm_kcalloc() in n2rng_probe()
crypto: chcr - Fix error handling related to 'chcr_alloc_shash'
padata: get_next is never NULL
crypto: exynos - Add new Exynos RNG driver
...
|
|
Jon Maloy says:
====================
tipc: refactor socket receive functions
We try to make the functions tipc_sk_recvmsg() and
tipc_sk_recvstream() more readable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We try to make this function more readable by improving variable names
and comments, using more stack variables, and doing some smaller changes
to the logics. We also rename the function to make it consistent with
naming conventions used elsewhere in the code.
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We try to make this function more readable by improving variable names
and comments, plus some minor changes to the logics.
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sunil Goutham says:
====================
net: thunderx: Adds XDP support
This patch series adds support for XDP to ThunderX NIC driver
which is used on CN88xx, CN81xx and CN83xx platforms.
Patches 1-4 are performance improvement and cleanup patches
which are done keeping XDP performance bottlenecks in view.
Rest of the patches adds actual XDP support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Driver follows a method of taking one extra reference on the
page for recycling which is fine in usual packet path where
each 64KB page is segmented into multiple receive buffers.
But in XDP mode since there is just one receive buffer per
page taking extra page reference itself becomes big bottleneck
consuming ~50% of CPU cycles due to atomic operations.
This patch adds a internal ref count in pgcache for each
page and additional page references are taken in a batch
instead of just one at a time. Internal i.e 'pgcache->ref_count'
and page's i.e 'page->_refcount' counters are compared to check
page's recyclability.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When in XDP mode reserve XDP_PACKET_HEADROOM bytes at the start
of receive buffer for XDP program to modify headers and adjust
packet start. Additional code changes done to handle such packets.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds support for XDP_TX i.e transmits packet out of
the XDP TX queue mapped to the corresponding Rx queue
on which packet is received.
Since SQ for XDP TX will be used only on a single cpu i.e
SQ description creation and freeing, using atomic free count
is not necessary and will become a bottleneck. Hence added
a separate 'xdp_free_cnt' used for SQs designated for XDP
to track descriptor free count.
Changes also include
- A new entry 'xdp_page' is added to save transmitted packet's
page pointer for later cleanup.
- XDP Tx SQ's doorbell is ringed once per NAPI instance.
- Retrieving designated SQ for packets being sent out by stack
via 'nicvf_xmit'.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds support for XDP_DROP.
Also since in XDP mode there is just a single buffer per page,
made changes to recycle DMA mapping info as well along with pages.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds basic XDP support i.e attaching a BPF program to an
interface. Also takes care of allocating separate Tx queues
for XDP path and for network stack packet transmission.
This patch doesn't support handling of any of the XDP actions,
all are treated as XDP_PASS i.e packets will be handed over to
the network stack.
Changes also involve allocating one receive buffer per page in XDP
mode and multiple in normal mode i.e when no BPF program is attached.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Get rid of unnecessary double pointer references and type casting
in receive buffer allocation code.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Optimized CQE handling with below changes
- Feeing descriptors back to SQ in bulk i.e once per NAPI
instance instead for every CQE_TX, this will reduce number
of atomic updates to 'sq->free_cnt'.
- Checking errors in CQE_TX and CQE_RX before calling appropriate
fn()s to update error stats i.e reduce branching.
Also removed debug messages in packet handling path which otherwise
causes issues if DEBUG is enabled.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Receive buffer's physical address or iova will anyway not
go beyond 49bits, since it is the max supported HW address.
As per perf, updating bitfields i.e buf_addr:42 in RBDR
descriptor entry consumes lots of cpu cycles, hence changed
it to a 64bit field with alignment requirements taken care of.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds support for page recycling for allocating receive buffers
to reduce cost of refilling RBDR ring. Also got rid of using
compound pages when pagesize is 4K, only order-0 pages now.
Only page is recycled, DMA mappings still needs to be done for
every receive buffer allocated due to following constraints
- Cannot have just one receive buffer per 64KB page.
- There is just one buffer ring shared across 8 Rx queues, so
buffers of same page can go to any Rx queue.
- HW gives buffer address where packet has been DMA'ed and not
the index into buffer ring.
This makes it not possible to resue DMA mapping info. So unfortunately
have to go through costly mapping route for every buffer.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We should call ipxitf_put() if the copy_to_user() fails.
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jump is now the only one using value action opcode. This is going to
change soon. So introduce helpers to work with this. Convert TC_ACT_JUMP.
This also fixes the TC_ACT_JUMP check, which is incorrectly done as a
bit check, not a value check.
Fixes: e0ee84ded796 ("net sched actions: Complete the JUMPX opcode")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sudarsana Reddy Kalluru says:
====================
qed*: PTP bug fixes.
The series addresses couple of issues in the PTP implementation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PTP hardware filter configuration performed by the driver for a given
user requested config is not correct for some of the PTP modes.
Following changes are needed for PTP config-filter implementation.
1. NIG_REG_TX_PTP_EN register - Bits 0/1/2 respectively enables
TimeSync/"V1 frame format support"/"V2 frame format support" on
the TX side. Set the associated bits based on the user request.
2. ptp4l application fails to operate in Peer Delay mode. Following
changes are needed to fix this,
a. Driver should enable (set to 0) DA #1-related bits for IPv4,
IPv6 and MAC destination addresses in these registers:
NIG_REG_TX_LLH_PTP_RULE_MASK
NIG_REG_LLH_PTP_RULE_MASK
b. NIG_REG_LLH_PTP_PARAM_MASK/NIG_REG_TX_LLH_PTP_PARAM_MASK should
be set to 0x0 in all modes.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PTP Tx timestamping data structures are not protected against the
concurrent access in the Tx paths. Protecting the same using atomic
bit locks.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The IOT2000 is industrial controller platform, derived from the Intel
Galileo Gen2 board. The variant IOT2020 comes with one LAN port, the
IOT2040 has two of them. They can be told apart based on the board asset
tag in the DMI table.
Based on patch by Sascha Weisenberger.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Sascha Weisenberger <sascha.weisenberger@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
hns_get_sset_count() returns HNS_NET_STATS_CNT and the data space allocated
is not enough for ethtool_get_strings(), which will cause random memory
corruption.
When SLAB and DEBUG_SLAB are both enabled, memory corruptions like the
the following can be observed without this patch:
[ 43.115200] Slab corruption (Not tainted): Acpi-ParseExt start=ffff801fb0b69030, len=80
[ 43.115206] Redzone: 0x9f911029d006462/0x5f78745f31657070.
[ 43.115208] Last user: [<5f7272655f746b70>](0x5f7272655f746b70)
[ 43.115214] 010: 70 70 65 31 5f 74 78 5f 70 6b 74 00 6b 6b 6b 6b ppe1_tx_pkt.kkkk
[ 43.115217] 030: 70 70 65 31 5f 74 78 5f 70 6b 74 5f 6f 6b 00 6b ppe1_tx_pkt_ok.k
[ 43.115218] Next obj: start=ffff801fb0b69098, len=80
[ 43.115220] Redzone: 0x706d655f6f666966/0x9f911029d74e35b.
[ 43.115229] Last user: [<ffff0000084b11b0>](acpi_os_release_object+0x28/0x38)
[ 43.115231] 000: 74 79 00 6b 6b 6b 6b 6b 70 70 65 31 5f 74 78 5f ty.kkkkkppe1_tx_
[ 43.115232] 010: 70 6b 74 5f 65 72 72 5f 63 73 75 6d 5f 66 61 69 pkt_err_csum_fai
Signed-off-by: Timmy Li <lixiaoping3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Be careful when comparing tcp_time_stamp to some u32 quantity,
otherwise result can be surprising.
Fixes: 7c106d7e782b ("[TCP]: TCP Low Priority congestion control")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the instruction right before the branch destination is
a 64 bit load immediate, we currently calculate the wrong
jump offset in the ctx->offset[] array as we only account
one instruction slot for the 64 bit load immediate although
it uses two BPF instructions. Fix it up by setting the offset
into the right slot after we incremented the index.
Before (ldimm64 test 1):
[...]
00000020: 52800007 mov w7, #0x0 // #0
00000024: d2800060 mov x0, #0x3 // #3
00000028: d2800041 mov x1, #0x2 // #2
0000002c: eb01001f cmp x0, x1
00000030: 54ffff82 b.cs 0x00000020
00000034: d29fffe7 mov x7, #0xffff // #65535
00000038: f2bfffe7 movk x7, #0xffff, lsl #16
0000003c: f2dfffe7 movk x7, #0xffff, lsl #32
00000040: f2ffffe7 movk x7, #0xffff, lsl #48
00000044: d29dddc7 mov x7, #0xeeee // #61166
00000048: f2bdddc7 movk x7, #0xeeee, lsl #16
0000004c: f2ddddc7 movk x7, #0xeeee, lsl #32
00000050: f2fdddc7 movk x7, #0xeeee, lsl #48
[...]
After (ldimm64 test 1):
[...]
00000020: 52800007 mov w7, #0x0 // #0
00000024: d2800060 mov x0, #0x3 // #3
00000028: d2800041 mov x1, #0x2 // #2
0000002c: eb01001f cmp x0, x1
00000030: 540000a2 b.cs 0x00000044
00000034: d29fffe7 mov x7, #0xffff // #65535
00000038: f2bfffe7 movk x7, #0xffff, lsl #16
0000003c: f2dfffe7 movk x7, #0xffff, lsl #32
00000040: f2ffffe7 movk x7, #0xffff, lsl #48
00000044: d29dddc7 mov x7, #0xeeee // #61166
00000048: f2bdddc7 movk x7, #0xeeee, lsl #16
0000004c: f2ddddc7 movk x7, #0xeeee, lsl #32
00000050: f2fdddc7 movk x7, #0xeeee, lsl #48
[...]
Also, add a couple of test cases to make sure JITs pass
this test. Tested on Cavium ThunderX ARMv8. The added
test cases all pass after the fix.
Fixes: 8eee539ddea0 ("arm64: bpf: fix out-of-bounds read in bpf2a64_offset()")
Reported-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Xi Wang <xi.wang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This work adds BPF_XADD for BPF_W/BPF_DW to the arm64 JIT and therefore
completes JITing of all BPF instructions, meaning we can thus also remove
the 'notyet' label and do not need to fall back to the interpreter when
BPF_XADD is used in a program!
This now also brings arm64 JIT in line with x86_64, s390x, ppc64, sparc64,
where all current eBPF features are supported.
BPF_W example from test_bpf:
.u.insns_int = {
BPF_ALU32_IMM(BPF_MOV, R0, 0x12),
BPF_ST_MEM(BPF_W, R10, -40, 0x10),
BPF_STX_XADD(BPF_W, R10, R0, -40),
BPF_LDX_MEM(BPF_W, R0, R10, -40),
BPF_EXIT_INSN(),
},
[...]
00000020: 52800247 mov w7, #0x12 // #18
00000024: 928004eb mov x11, #0xffffffffffffffd8 // #-40
00000028: d280020a mov x10, #0x10 // #16
0000002c: b82b6b2a str w10, [x25,x11]
// start of xadd mapping:
00000030: 928004ea mov x10, #0xffffffffffffffd8 // #-40
00000034: 8b19014a add x10, x10, x25
00000038: f9800151 prfm pstl1strm, [x10]
0000003c: 885f7d4b ldxr w11, [x10]
00000040: 0b07016b add w11, w11, w7
00000044: 880b7d4b stxr w11, w11, [x10]
00000048: 35ffffab cbnz w11, 0x0000003c
// end of xadd mapping:
[...]
BPF_DW example from test_bpf:
.u.insns_int = {
BPF_ALU32_IMM(BPF_MOV, R0, 0x12),
BPF_ST_MEM(BPF_DW, R10, -40, 0x10),
BPF_STX_XADD(BPF_DW, R10, R0, -40),
BPF_LDX_MEM(BPF_DW, R0, R10, -40),
BPF_EXIT_INSN(),
},
[...]
00000020: 52800247 mov w7, #0x12 // #18
00000024: 928004eb mov x11, #0xffffffffffffffd8 // #-40
00000028: d280020a mov x10, #0x10 // #16
0000002c: f82b6b2a str x10, [x25,x11]
// start of xadd mapping:
00000030: 928004ea mov x10, #0xffffffffffffffd8 // #-40
00000034: 8b19014a add x10, x10, x25
00000038: f9800151 prfm pstl1strm, [x10]
0000003c: c85f7d4b ldxr x11, [x10]
00000040: 8b07016b add x11, x11, x7
00000044: c80b7d4b stxr w11, x11, [x10]
00000048: 35ffffab cbnz w11, 0x0000003c
// end of xadd mapping:
[...]
Tested on Cavium ThunderX ARMv8, test suite results after the patch:
No JIT: [ 3751.855362] test_bpf: Summary: 311 PASSED, 0 FAILED, [0/303 JIT'ed]
With JIT: [ 3573.759527] test_bpf: Summary: 311 PASSED, 0 FAILED, [303/303 JIT'ed]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fs/compat.c cleanups from Al Viro:
"More moving of compat syscalls from fs/compat.c to fs/*.c where the
native counterparts live.
And death to compat_sys_getdents64() - the only architecture that used
to need it was ia64, and _that_ has lost biarch support quite a few
years ago"
* 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/compat.c: trim unused includes
move compat_rw_copy_check_uvector() over to fs/read_write.c
fhandle: move compat syscalls from compat.c
open: move compat syscalls from compat.c
stat: move compat syscalls from compat.c
fcntl: move compat syscalls from compat.c
readdir: move compat syscalls from compat.c
statfs: move compat syscalls from compat.c
utimes: move compat syscalls from compat.c
move compat select-related syscalls to fs/select.c
Remove compat_sys_getdents64()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull splice updates from Al Viro:
"These actually missed the last cycle; the branch itself is from last
December"
* 'work.splice' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make nr_pages calculation in default_file_splice_read() a bit less ugly
splice/tee/vmsplice: validate flags
splice_pipe_desc: kill ->flags
remove spd_release_page()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"Cleanups that sat in -next + -stable fodder that has just missed 4.11.
There's more iov_iter work in my local tree, but I'd prefer to push
the stuff that had been in -next first"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
iov_iter: don't revert iov buffer if csum error
generic_file_read_iter(): make use of iov_iter_revert()
generic_file_direct_write(): make use of iov_iter_revert()
orangefs: use iov_iter_revert()
sctp: switch to copy_from_iter_full()
net/9p: switch to copy_from_iter_full()
switch memcpy_from_msg() to copy_from_iter_full()
rds: make use of iov_iter_revert()
|
|
Pull CIFS fixes from Steve French:
"Three cifs/smb3 fixes - including two for stable"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs: don't check for failure from mempool_alloc()
Do not return number of bytes written for ioctl CIFS_IOC_COPYCHUNK_FILE
Fix match_prepath()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardened usercopy updates from Kees Cook:
"A couple hardened usercopy changes:
- drop now unneeded is_vmalloc_or_module() check (Laura Abbott)
- use enum instead of literals for stack frame API (Sahara)"
* tag 'usercopy-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
mm/usercopy: Drop extra is_vmalloc_or_module() check
usercopy: Move enum for arch_within_stack_frames()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
"This has a large internal refactoring along with several smaller
fixes.
- constify compression structures; Bhumika Goyal
- restore powerpc dumping; Ankit Kumar
- fix more bugs in the rarely exercises module unloading logic
- reorganize filesystem locking to fix problems noticed by lockdep
- refactor internal pstore APIs to make development and review
easier:
- improve error reporting
- add kernel-doc structure and function comments
- avoid insane argument passing by using a common record
structure"
* tag 'pstore-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
pstore: Solve lockdep warning by moving inode locks
pstore: Fix flags to enable dumps on powerpc
pstore: Remove unused vmalloc.h in pmsg
pstore: simplify write_user_compat()
pstore: Remove write_buf() callback
pstore: Replace arguments for write_buf_user() API
pstore: Replace arguments for write_buf() API
pstore: Replace arguments for erase() API
pstore: Do not duplicate record metadata
pstore: Allocate records on heap instead of stack
pstore: Pass record contents instead of copying
pstore: Always allocate buffer for decompression
pstore: Replace arguments for write() API
pstore: Replace arguments for read() API
pstore: Switch pstore_mkfile to pass record
pstore: Move record decompression to function
pstore: Extract common arguments into structure
pstore: Add kernel-doc for struct pstore_info
pstore: Improve register_pstore() error reporting
pstore: Avoid race in module unloading
...
|
