summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-03drm/amd/display: Add hdcp to KconfigBhawanpreet Lakha
[Why] HDCP is not fully finished, so we need to be able to build and run the driver without it. [How] Add a Kconfig to toggle it Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: only enable HDCP for DCN+Bhawanpreet Lakha
[Why] We don't support HDCP for pre RAVEN asics [How] Check if we are RAVEN+. Use this to attach the content_protection property, this way usermode can't try to enable HDCP on pre DCN asics. Also we need to update the module on hpd so guard it aswell Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Update CP property based on HW queryBhawanpreet Lakha
[Why] We need to use HW state to set content protection to ENABLED. This way we know that the link is encrypted from the HW side [How] Create a workqueue that queries the HW every ~2seconds, and sets it to ENABLED or DESIRED based on the result from the hardware Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: handle DP cpirqBhawanpreet Lakha
[Why] This is needed for DP as DP can send us info using irq. [How] Check if irq bit is set on short pulse and call the function that handles cpirq in amdgpu_dm_hdcp Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Handle Content protection property changesBhawanpreet Lakha
[Why] We need to manage the content protection property changes for different usecase, once cp is DESIRED we need to maintain the ENABLED/DESIRED status for different cases. [How] 1. Attach the content_protection property 2. HDCP enable (UNDESIRED -> DESIRED) call into the module with the correct parameters to start hdcp. Set cp to ENABLED 3. HDCP disable (ENABLED -> UNDESIRED) Call the module to disable hdcp. 3. Handle Special cases (Hotplug, S3, headless S3, DPMS) If already ENABLED: set to DESIRED on unplug/suspend/dpms, and disable hdcp Then on plugin/resume/dpms: enable HDCP Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Initialize HDCP work queueBhawanpreet Lakha
[Why] We need this to enable HDCP on linux, as we need events to interact with the hdcp module [How] Add work queue to display manager and handle the creation and destruction of the queue Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Create dpcd and i2c packing functionsBhawanpreet Lakha
[Why] We need to read and write specific i2c and dpcd messages. [How] Created static functions for packing the dpcd and i2c messages for hdcp. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Create amdgpu_dm_hdcpBhawanpreet Lakha
[Why] We need to interact with the hdcp module from the DM, the module has to be interacted with in terms of events [How] Create the files needed for linux hdcp. These files manage the events needed for the dm to interact with the hdcp module. We use the kernel work queue to process the events needed for the module Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Update hdcp display configBhawanpreet Lakha
[Why] We need to update the hdcp display parameter whenever the link is updated, so the next time there is an update to hdcp we have the latest display info [How] Create a callback, and use this anytime there is a change in the link. This will be used later by the dm. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: add PSP block to verify hdcp stepsBhawanpreet Lakha
[Why] All the HDCP transactions should be verified using PSP. [How] This patch calls psp with the correct inputs to verify the steps of authentication. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Add HDCP moduleBhawanpreet Lakha
This module manages HDCP for amdgpu driver. The module behaves as a state machine which handles the different authentication states of HDCP The module is divided into 3 major components +--------+ | Hdcp.c | +--------+ Manages the state machine, sends the events to be executed and communicates with the dm +-----------+ |Execution.c| +-----------+ This executes events based on the current state. Also generates execution results as transition inputs +------------+ |Transition.c| +------------+ Decides the next state based on the input and makes requests to hdcp.c to handle. +-------------+ ------> | Execution.c | ------ | +-------------+ | | V +----+ +--------+ +--------------+ | DM | -----> | Hdcp.c | <------------ | Transition.c | +----+ <----- +--------+ +--------------+ v2: Drop unused function definitions Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amdgpu: psp DTM initBhawanpreet Lakha
DTM is the display topology manager. This is needed to communicate with psp about the display configurations. This patch adds -Loading the firmware -The functions and definitions for communication with the firmware v2: Fix formatting Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amdgpu: psp HDCP initBhawanpreet Lakha
This patch adds -Loading the firmware -The functions and definitions for communication with the firmware v2: Fix formatting Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Improve LFC behaviourAric Cyr
[Why] There can be some unsynchronized frames when entering/exiting LFC. This may cause tearing or stuttering at such transitions. [How] Add a enter/exit margin to algorithm to smoothly transition into and out of LFC without desynchronizing frames. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Reza Amini <Reza.Amini@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Add detile buffer size for DCN20Dmytro Laktyushkin
Detile buffer size affects dcc caps and therefore needs to be corrected for each ip. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: fix use of uninitialized variableMartin Leung
tg_inst may be used uninitialized, so initialize it to 0. Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jaehyun Chung <Jaehyun.Chung@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: 3.2.51.1Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Add missing HBM support and raise Vega20's uclk.Zhan Liu
[Why] When more than 2 displays are connected to the graphics card, only the minimum memory clock is needed. However, when more displays are connected, the minimum memory clock is not sufficient enough to support the overwhelming bandwidth. System will hang under this circumstance. Also, the old code didn't address HBM cards, which has 2 pseudo channels. We need to add the HBM part here. [How] When graphics card connects to 2 or more displays, switch to high memory clock. Also, choose memory multiplier based on whether its regular DRAM or HBM. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: 3.2.51Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: enable single dp seamless bootMartin Leung
[why] seamless boot didn't work for non edp's before [how] removed edp-specific code, made dp read uefi-set link settings. Also fixed a hubbub code line to be consistent with usage of function. Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: update odm mode validation to be in line with policyDmytro Laktyushkin
Previously 8k30 worked with dsc and odm combine due to a workaround that ran the formula a second time with dsc support enable should dsc validation fail. This worked when clocks were low enough for formula to enable odm to lower voltage, however now broke due to increased clocks. This change updates the ODM combine policy within the formula to properly reflect our current policy within DC, only enabling ODM when we have to, as well as adding a check for viewport width when dsc is enabled. As a side effect the redundant call to dml when odm is required is now unnecessary. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Optimize clocks on clock changeWesley Chalmers
[WHY] Presently, there is no way for clocks to be lowered, only raised. [HOW] Compare clock status against previous known clock status, and optimize if different. This requires re-ordering the layout of the dc_clocks structure, as the current ordering allows identical clock states to appear different. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Set number of pipes to 1 if the second pipe was disabledNikola Cornij
[why] Some ODM-related register settings are inconsistently updated by VBIOS, causing the state in DC to be invalid, which would then end up crashing in certain use-cases (such as disable/enable device). [how] Check the enabled status of the second pipe when determining the number of OPTC sources. If the second pipe is disabled, set the number of sources to 1 regardless of other settings (that may not be updated correctly). Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: set minimum abm backlight levelAnthony Koo
[Why] A lot of the time, the backlight characteristic curve maps min backlight to a non-zero value. But there are cases where we want the curve to intersect at 0. In this scenario even if OS never asks to set 0% backlight, the ABM reduction can result in backlight being lowered close to 0. This particularly can cause problems in some LED drivers, and in general just looks like backlight is completely off. [How] Add default cap to disallow backlight from dropping below 1% even after ABM reduction is applied. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Revert fixup DPP programming sequenceWesley Chalmers
[WHY] This change was made because DTO programming was double-buffered, which is itself an issue. After deactivating the DTO double buffer, this change becomes unnecessary. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Do not double-buffer DTO adjustmentsWesley Chalmers
[WHY] When changing DPP global ref clock, DTO adjustments must take effect immediately, or else underflow may occur. It appears the original decision to double-buffer DTO adjustments was made to prevent underflows that occur when raising DPP ref clock (which is not double-buffered), but that same decision causes similar issues when lowering DPP global ref clock. The better solution is to order the adjustments according to whether clocks are being raised or lowered. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amd/display: Separate hardware initialization from creationJulian Parkin
[Why] Separating the hardware initialization from the creation of the dc structures gives greater flexibility to the dm to override options for debugging. [How] Move the hardware initialization call to a new function, dc_hardware_init. No functional change is intended. Signed-off-by: Julian Parkin <julian.parkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amd/display: fix i2c wtire mot incorrect issueLewis Huang
[Why] I2C write command always send mot = true will cause sink state incorrect. [How] 1. Remove default i2c write mot = true. 2. Deciding mot flag by is_end_of_payload flag. Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amd/display: Handle virtual signal type in disable_link()Martin Tsai
[Why] The new implementation changed the behavior to allow process setMode to DAL when DAL returns empty mode query for unplugged display. This will trigger additional disable_link(). When unplug HDMI from MST dock, driver will update stream->signal to "Virtual". disable_link() will call disable_output() if the signal type is not DP and induce other displays on MST dock show black screen. [How] Don't need to process disable_output() if the signal type is virtual. Signed-off-by: Martin Tsai <martin.tsai@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amd/display: fix global sync param extraction indexingDmytro Laktyushkin
dcn20_calculate_dlg_params was incorrectly indexing pipe src and dst structs when extracting global sync params. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Jaehyun Chung <Jaehyun.Chung@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amd/display: add vtg update after global sync updateDmytro Laktyushkin
Global sync update was missing vtg update resulting in underflow if vstartup decreased a significant amount. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Jaehyun Chung <Jaehyun.Chung@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amd/display: Add debugfs entry to force YUV420 outputStylon Wang
[Why] Even if YUV420 is available for video mode, YUV444 is still automatically selected. This poses a problem for compliance tests. [How] Add a per-connector debugfs entry "force_yuv420_output" to force selection of YUV420 mode. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amd/display: add additional flag consideration for surface updateDmytro Laktyushkin
Surface dchub/dpp update would not trigger if a stream update was the only cause. This change now allows stream flags to trigger this update. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amd/display: Replace for loop w/ function callWesley Chalmers
[WHY] A function to adjust DPP clocks with DTO already exists; function code is identical to the code replaced here Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amd/display: Rebuild mapped resources after pipe splitMikita Lipski
[why] The issue is specific for linux, as on timings such as 8K@60 or 4K@144 DSC should be working in combination with ODM Combine in order to ensure that we can run those timings. The validation for those timings was passing, but when pipe split was happening second pipe wasn't being programmed. [how] Rebuild mapped resources if we split stream for ODM. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amd/display: 3.2.50Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amd/display: define parameters for abm 2.3Josip Pavic
[Why] Current configuration 0 is just a placeholder, and final parameters needed. Also, configuration 1 is expected to emulate ABM 2.1 but is too aggressive. [How] Redefine configuration 0 with the finalized parameters, and increase the contrast gain of configuration 1 so that it properly emulates ABM 2.1. Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amd/display: Fix HUBP secondary viewport programmingIlya Bakoulin
[Why] Secondary viewport dimension/position registers are not programmed, which can cause issues in some stereo configurations. [How] Add register definitions and register programming. Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amdgpu: cleanup creating BOs at fixed location (v2)Christian König
The placement is something TTM/BO internal and the RAS code should avoid touching that directly. Add a helper to create a BO at a fixed location and use that instead. v2: squash in fixes (Alex) Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdgpu:Fix EEPROM checksum calculation.Andrey Grodzovsky
Fix checksum calculation after manually resetting the table. Unify reset and empty EEPROM init flow. Protect the table reset with lock. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdgpu: fix ras ctrl debugfs node leakGuchun Chen
Use debugfs_remove_recursive to remove the whole debugfs directory instead of removing the node one by one. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdgpu: trace if a PD/PT update is done directlyChristian König
This is usfull for debugging. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdgpu: drop double HDP flush in the VM codeChristian König
Already done in the CPU based backend code. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdgpu: cleanup coding style in the VM code a bitChristian König
No functional change. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdgpu: revert "disable bulk moves for now"Christian König
This reverts commit a213c2c7e235cfc0e0a161a558f7fdf2fb3a624a. The changes to fix this should have landed in 5.1. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Zhou, David(ChunMing) <David1.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdgpu/SRIOV: Navi12 SRIOV VF gets GTT baseJiange Zhao
With changes in PSP and HV, SRIOV VF will handle vram gtt location just like bare metal. There is no need to differentiate it anymore. Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdgpu: remove program of lbpw for renoirAaron Liu
These is no LBPW on Renoir. So removing program of lbpw for renoir. Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdkfd: Swap trap temporary registers in gfx10 trap handlerJay Cornwall
ttmp[4:5] hold information useful to the debugger. Use ttmp[14:15] instead, aligning implementation with gfx9 trap handler. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: shaoyun liu <Shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdgpu: remove the redundant null checkszhong jiang
debugfs_remove and kfree has taken the null check in account. hence it is unnecessary to check it. Just remove the condition. No functional change. This issue was detected by using the Coccinelle software. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/radeon: be quiet when no SAD block is foundJean Delvare
It is fine for displays without audio functionality to not provide any SAD block in their EDID. Do not log an error in that case, just return quietly. Inspired by a similar fix to the amdgpu driver in the context of bug fdo#107825: https://bugs.freedesktop.org/show_bug.cgi?id=107825 Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-22 22:26:40 +0000