summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-10-23ARM: dts: imx6qdl-wandboard: Add support for the revd1 variantsFabio Estevam
Latest wandboard hardware revision is revd1, which brings the following new features: - PFUZE100 PMIC - AR8035 Ethernet PHY - Upgrade Wifi/BT chip to BCM4339/BCM43430. Add support for the mx6, mx6dl and mx6qp revd1 variants. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-23ARM: dts: imx6ul-14x14-evk: switch lcdif pixel clock to video pllPhilipp Zabel
By default, the lcdif_pre_sel mux is switched to the pll3_pfd1_540m PFD source. If this mux is allowed to propagate rate changes to its parent, setting the LCDIF pixel clock rate to 9 MHz, as required by the LCD panel, will cause the pll3_pfd1_540m PFD to be switched away from its nominal rate to 288 MHz. This has no negative side effects, as there are no other children to this PFD. Still, to avoid surprises, it might be preferrable to switch to the designated video PLL (pll5_video_div) as clock source for the LCDIF pixel clock. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-23ARM: dts: imx53-tx53: add support for I2C bus recoveryLothar Waßmann
The imx-i2c driver supports automatic bus recovery via the GPIO function of the I2C pins. Enable this functionality for the Ka-Ro electronics TX53 modules. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-23ARM: dts: imx53-tx53: use explicit pad_ctl settings for I2C pinsLothar Waßmann
Don't rely on the padctl settings established by the boot loader, but explicitly specify the padctl values in DTB. This is also necessary to be able to use the DTB files from the Linux kernel for future U-Boot versions that support HW configuration via DTB. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-23ARM: dts: imx53-tx53: add trickle-charge config for DS1339Lothar Waßmann
As the DS1339 driver now supports enabling the trickle charge feature via DTB, add the appropriate properties to utilize this feature. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-23ARM: dts: imx53-tx53: remove obsolete eeti,egalax_tsLothar Waßmann
The display, that incorporates this touchpanel is obsolete and won't be supported any more. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-23ARM: dts: imx53-tx53: remove the regulators busLothar Waßmann
It is not recommended to place the regulator nodes inside 'simple-bus', so adjust them accordingly. The motivation for rearranging this is to make it easier to add new regulator nodes in the future. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-23ARM: dts: imx53-tx53: Relicense the TX53 dts files under GPLv2/X11Lothar Waßmann
The current GPL only licensing on the dts files makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our dts files first under a GPL/X11 dual-license. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-23ARM: dts: imx28-tx28: add trickle-charge config for DS1339Lothar Waßmann
As the DS1339 driver now supports enabling the trickle charge feature via DTB, add the appropriate properties to utilize this feature. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-14ARM: dts: imx28-tx28: remove the regulators busLothar Waßmann
It is not recommended to place the regulator nodes inside 'simple-bus', so adjust them accordingly. The motivation for rearranging this is to make it easier to add new regulator nodes in the future. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-14ARM: dts: imx28-tx28: Relicense the TX28 dts file under GPLv2/X11Lothar Waßmann
The current GPL only licensing on the dts file makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our dts files first under a GPL/X11 dual-license. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: imx51: Fix inconsistent display port namesMarco Franchi
Contrary to later i.MX SoCs, the parallel display interface pad groups on i.MX51 are called DISP1 and DISP2 in the Reference Manual, not DISP0 and DISP1. Fix this inconsistence by changing the DISP names in the i.mx51 dts. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: imx: Fix incorrect display nodes notationMarco Franchi
The following build warnings are seen with W=1: Warning (unit_address_vs_reg): Node /display@di0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /display@di1 has a unit name, but no reg property Fix all these warnings by changing 'display@diX' to 'dispX'. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: imx25-pdk: Add touchscreen supportFabio Estevam
Add support for the built-in touchscreen controller present on MX25. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: imx6qdl: Remove leading zeroes from unit addressesMarco Franchi
The following build warnings are seen with W=1: Warning (simple_bus_reg): Node /soc/sram@00900000 simple-bus unit address format error, expected "900000" Warning (simple_bus_reg): Node /soc/aips-bus@02000000 simple-bus unit address format error, expected "2000000" Warning (simple_bus_reg): Node /soc/aips-bus@02000000/pxp@020f0000 simple-bus unit address format error, expected "20f0000" (...) Remove the leading zeroes from unit addresses to fix the warnings. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: imx6ul: Remove leading zeroes from unit addressesMarco Franchi
The following build warnings are seen with W=1: Warning (unit_address_format): Node /interrupt-controller@00a01000 unit name should not have leading 0s Warning (simple_bus_reg): Node /soc/sram@00900000 simple-bus unit address format error, expected "900000" Warning (simple_bus_reg): Node /soc/dma-apbh@01804000 simple-bus unit address format error, expected "1804000" (...) Remove the leading zeroes from unit addresses to fix the warnings. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: imx6q-utilite-pro: add HDMI CEC pinctrlChristopher Spinrath
On the Utilite Pro the CEC line is wired up to the HDMI connector. Add the required pinctrl setting. Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: imx6qdl-sabresd: Add CEC supportFabio Estevam
HDMI_TX_CEC_LINE pin is used for CEC, so pass it in the device tree. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: imx6qdl-sabresd: Use the 'vpcie-supply' propertyFabio Estevam
Since commit c26ebe98a103 ("PCI: imx6: Add regulator support"), it is possible to pass the 'vpcie-supply' property to describe the PCIE supply. This way we can remove the 'regulator-always-on' property from the regulator and have a better device tree description. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: imx6qdl-icore-rqs: Add CAN nodesJagan Teki
Add support for can1 and can2 nodes on Engicam i.CoreM6 RQS QDL module boards. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: imx6dl-icore: Add touchscreen nodeJagan Teki
max11801 touchscreen on Engicam iCoreM6 DualLite/Solo module is connected via i2c1, so add max11801: touchscreen@48 on i2c1. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: imx6qdl-icore-rqs: Switch to use simple-audio-cardJagan Teki
This patch replace fsl,imx-audio-sgtl5000 and use simple-audio-card for Engicam i.CoreM6 RQS QDL platform boards. This patch also fix, pinctrl_adumux. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: imx6qdl-icore-rqs: Move Sound nodes to dtsiJagan Teki
imx6q, imx6dl icore-rqs modules share common sound nodes, so move the sound nodes from imx6q-icore-rqs into dtsi so-that both can share the common node details. And also replace codec: sgtl5000@0a => sgtl5000: codec@a on imx6q-icore-rqs.dts to [label:] node-name[@unit-address] according to devicetree specification from ePAPER v1.1 Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: imx6qdl-icore: Add Sound card supportJagan Teki
Linux Sound card now uses generic simple-audio-card, so add the same along with related audmux and codec(via u2c3) for i.CoreM6 QDL module boards. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-09-22ARM: dts: Add initial Pistachio i.mx6q board support.YuanCheng Cheng
Working items: - 800MHz CPU - 2GB of RAM (DDR3) - 4GB of eMMC storage - 1T1R WiFi 2.4 GHz - Power management support - 1x 10/100/1000 Mbps Ethernet WAN port - 2x USB 2.0 Host - PCIe - HDMI/VGA/LVDS display - 1x UART for RS232/422/485 - 2x UART for RS232 - 1x UART for serial console - 1x CAN bus Specification: http://nutsboard.org/pistachio Signed-off-by: YuanCheng Cheng <onlywig@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-09-22ARM: dts: imx6sx: add vining-2000 board supportChristoph Fritz
Add initial imx6sx-softing-vining-2000 board support. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-09-22ARM: dts: imx6: RDU2: disallow RMI4 device sleepLucas Stach
This is causing issues with some specific controller configurations, as the platform isn't power limited it's better to keep it disabled. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-09-22ARM: dts: imx6: RDU2: disable over-current detection on USB H1Lucas Stach
Just like the OTG port, USB H1 has no over-current detection wired up. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-09-20ARM: dts: imx53: Add GE Healthcare PPDFabien Lahoudere
PPD is a product from GE Healthcare to monitor vital biometric signals. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-09-20dt-bindings: misc: achc: Add device tree binding for GE ACHCMartyn Welch
Add Device Tree binding document for GE Healthcare USB Management Controller (ACHC). Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-09-20ARM: dts: imx7d-pico: Add Wifi supportVanessa Maegima
imx7d-pico has an ap6212 wifi chip connected to usdhc2 port. Add support for the usdhc2 port and to the WL_REG_ON regulator so Wifi can be functional on this board. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-09-16Linux 4.14-rc1Linus Torvalds
2017-09-16Merge tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI updates from Richard Weinberger: "Minor improvements" * tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs: UBI: Fix two typos in comments ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate" ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines
2017-09-16Merge branch 'for-linus-4.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - minor improvements - fixes for Debian's new gcc defaults (pie enabled by default) - fixes for XSTATE/XSAVE to make UML work again on modern systems * 'for-linus-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: return negative in tuntap_open_tramp() um: remove a stray tab um: Use relative modversions with LD_SCRIPT_DYN um: link vmlinux with -no-pie um: Fix CONFIG_GCOV for modules. Fix minor typos and grammar in UML start_up help um: defconfig: Cleanup from old Kconfig options um: Fix FP register size for XSTATE/XSAVE
2017-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger. 2) Fix double-free in rmnet driver, from Dan Carpenter. 3) INET connection socket layer can double put request sockets, fix from Eric Dumazet. 4) Don't match collect metadata-mode tunnels if the device is down, from Haishuang Yan. 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in be2net driver, from Suresh Reddy. 6) Fix scaling error in gen_estimator, from Eric Dumazet. 7) Fix 64-bit statistics deadlock in systemport driver, from Florian Fainelli. 8) Fix use-after-free in sctp_sock_dump, from Xin Long. 9) Reject invalid BPF_END instructions in verifier, from Edward Cree. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) mlxsw: spectrum_router: Only handle IPv4 and IPv6 events Documentation: link in networking docs tcp: fix data delivery rate bpf/verifier: reject BPF_ALU64|BPF_END sctp: do not mark sk dumped when inet_sctp_diag_fill returns err sctp: fix an use-after-free issue in sctp_sock_dump netvsc: increase default receive buffer size tcp: update skb->skb_mstamp more carefully net: ipv4: fix l3slave check for index returned in IP_PKTINFO net: smsc911x: Quieten netif during suspend net: systemport: Fix 64-bit stats deadlock net: vrf: avoid gcc-4.6 warning qed: remove unnecessary call to memset tg3: clean up redundant initialization of tnapi tls: make tls_sw_free_resources static sctp: potential read out of bounds in sctp_ulpevent_type_enabled() MAINTAINERS: review Renesas DT bindings as well net_sched: gen_estimator: fix scaling error in bytes/packets samples nfp: wait for the NSP resource to appear on boot nfp: wait for board state before talking to the NSP ...
2017-09-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "A second round of updates for the input subsystem: - a new driver for PWM-controlled vibrators - ucb1400 touchscreen driver had completely busted suspend/resume handling - we now handle "home" button found on some devices with Goodix touchscreens - assorted other fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Gigabyte P57 to the keyboard reset table Input: xpad - validate USB endpoint type during probe Input: ucb1400_ts - fix suspend and resume handling Input: edt-ft5x06 - fix access to non-existing register Input: elantech - make arrays debounce_packet static, reduces object code size Input: surface3_spi - make const array header static, reduces object code size Input: goodix - add support for capacitive home button Input: add a driver for PWM controllable vibrators Input: adi - make array seq static, reduces object code size
2017-09-16firmware: Restore support for built-in firmwareMarkus Trippelsdorf
Commit 5620a0d1aac ("firmware: delete in-kernel firmware") removed the entire firmware directory. Unfortunately it thereby also removed the support for built-in firmware. This restores the ability to build firmware directly into the kernel by pruning the original Makefile to the necessary minimum. The default for EXTRA_FIRMWARE_DIR is now the standard directory /lib/firmware/. Fixes: 5620a0d1aac ("firmware: delete in-kernel firmware") Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: Greg K-H <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-16mlxsw: spectrum_router: Only handle IPv4 and IPv6 eventsIdo Schimmel
The driver doesn't support events from address families other than IPv4 and IPv6, so ignore them. Otherwise, we risk queueing a work item before it's initialized. This can happen in case a VRF is configured when MROUTE_MULTIPLE_TABLES is enabled, as the VRF driver will try to add an l3mdev rule for the IPMR family. Fixes: 65e65ec137f4 ("mlxsw: spectrum_router: Don't ignore IPv6 notifications") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Andreas Rammhold <andreas@rammhold.de> Reported-by: Florian Klink <flokli@flokli.de> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-16Documentation: link in networking docsPavel Machek
Fix link in filter.txt. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-16tcp: fix data delivery rateEric Dumazet
Now skb->mstamp_skb is updated later, we also need to call tcp_rate_skb_sent() after the update is done. Fixes: 8c72c65b426b ("tcp: update skb->skb_mstamp more carefully") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15Merge branch '4.14-features' of ↵Linus Torvalds
git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.14 for MIPS; below a summary of the non-merge commits: CM: - Rename mips_cm_base to mips_gcr_base - Specify register size when generating accessors - Use BIT/GENMASK for register fields, order & drop shifts - Add cluster & block args to mips_cm_lock_other() CPC: - Use common CPS accessor generation macros - Use BIT/GENMASK for register fields, order & drop shifts - Introduce register modify (set/clear/change) accessors - Use change_*, set_* & clear_* where appropriate - Add CM/CPC 3.5 register definitions - Use GlobalNumber macros rather than magic numbers - Have asm/mips-cps.h include CM & CPC headers - Cluster support for topology functions - Detect CPUs in secondary clusters CPS: - Read GIC_VL_IDENT directly, not via irqchip driver DMA: - Consolidate coherent and non-coherent dma_alloc code - Don't use dma_cache_sync to implement fd_cacheflush FPU emulation / FP assist code: - Another series of 14 commits fixing corner cases such as NaN propgagation and other special input values. - Zero bits 32-63 of the result for a CLASS.D instruction. - Enhanced statics via debugfs - Do not use bools for arithmetic. GCC 7.1 moans about this. - Correct user fault_addr type Generic MIPS: - Enhancement of stack backtraces - Cleanup from non-existing options - Handle non word sized instructions when examining frame - Fix detection and decoding of ADDIUSP instruction - Fix decoding of SWSP16 instruction - Refactor handling of stack pointer in get_frame_info - Remove unreachable code from force_fcr31_sig() - Convert to using %pOF instead of full_name - Remove the R6000 support. - Move FP code from *_switch.S to *_fpu.S - Remove unused ST_OFF from r2300_switch.S - Allow platform to specify multiple its.S files - Add #includes to various files to ensure code builds reliable and without warning.. - Remove __invalidate_kernel_vmap_range - Remove plat_timer_setup - Declare various variables & functions static - Abstract CPU core & VP(E) ID access through accessor functions - Store core & VP IDs in GlobalNumber-style variable - Unify checks for sibling CPUs - Add CPU cluster number accessors - Prevent direct use of generic_defconfig - Make CONFIG_MIPS_MT_SMP default y - Add __ioread64_copy - Remove unnecessary inclusions of linux/irqchip/mips-gic.h GIC: - Introduce asm/mips-gic.h with accessor functions - Use new GIC accessor functions in mips-gic-timer - Remove counter access functions from irq-mips-gic.c - Remove gic_read_local_vp_id() from irq-mips-gic.c - Simplify shared interrupt pending/mask reads in irq-mips-gic.c - Simplify gic_local_irq_domain_map() in irq-mips-gic.c - Drop gic_(re)set_mask() functions in irq-mips-gic.c - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(), gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c. - Convert remaining shared reg access, local int mask access and remaining local reg access to new accessors - Move GIC_LOCAL_INT_* to asm/mips-gic.h - Remove GIC_CPU_INT* macros from irq-mips-gic.c - Move various definitions to the driver - Remove gic_get_usm_range() - Remove __gic_irq_dispatch() forward declaration - Remove gic_init() - Use mips_gic_present() in place of gic_present and remove gic_present - Move gic_get_c0_*_int() to asm/mips-gic.h - Remove linux/irqchip/mips-gic.h - Inline __gic_init() - Inline gic_basic_init() - Make pcpu_masks a per-cpu variable - Use pcpu_masks to avoid reading GIC_SH_MASK* - Clean up mti, reserved-cpu-vectors handling - Use cpumask_first_and() in gic_set_affinity() - Let the core set struct irq_common_data affinity microMIPS: - Fix microMIPS stack unwinding on big endian systems MIPS-GIC: - SYNC after enabling GIC region NUMA: - Remove the unused parent_node() macro R6: - Constify r2_decoder_tables - Add accessor & bit definitions for GlobalNumber SMP: - Constify smp ops - Allow boot_secondary SMP op to return errors VDSO: - Drop gic_get_usm_range() usage - Avoid use of linux/irqchip/mips-gic.h Platform changes: Alchemy: - Add devboard machine type to cpuinfo - update cpu feature overrides - Threaded carddetect irqs for devboards AR7: - allow NULL clock for clk_get_rate BCM63xx: - Fix ENETDMA_6345_MAXBURST_REG offset - Allow NULL clock for clk_get_rate CI20: - Enable GPIO and RTC drivers in defconfig - Add ethernet and fixed-regulator nodes to DTS Generic platform: - Move Boston and NI 169445 FIT image source to their own files - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Allow filtering enabled boards by requirements - Don't explicitly disable CONFIG_USB_SUPPORT - Bump default NR_CPUS to 16 JZ4700: - Probe the jz4740-rtc driver from devicetree Lantiq: - Drop check of boot select from the spi-falcon driver. - Drop check of boot select from the lantiq-flash MTD driver. - Access boot cause register in the watchdog driver through regmap - Add device tree binding documentation for the watchdog driver - Add docs for the RCU DT bindings. - Convert the fpi bus driver to a platform_driver - Remove ltq_reset_cause() and ltq_boot_select( - Switch to a proper reset driver - Switch to a new drivers/soc GPHY driver - Add an USB PHY driver for the Lantiq SoCs using the RCU module - Use of_platform_default_populate instead of __dt_register_buses - Enable MFD_SYSCON to be able to use it for the RCU MFD - Replace ltq_boot_select() with dummy implementation. Loongson 2F: - Allow NULL clock for clk_get_rate Malta: - Use new GIC accessor functions NI 169445: - Add support for NI 169445 board. - Only include in 32r2el kernels Octeon: - Add support for watchdog of 78XX SOCs. - Add support for watchdog of CN68XX SOCs. - Expose support for mips32r1, mips32r2 and mips64r1 - Enable more drivers in config file - Add support for accessing the boot vector. - Remove old boot vector code from watchdog driver - Define watchdog registers for 70xx, 73xx, 78xx, F75xx. - Make CSR functions node aware. - Allow access to CIU3 IRQ domains. - Misc cleanups in the watchdog driver Omega2+: - New board, add support and defconfig Pistachio: - Enable Root FS on NFS in defconfig Ralink: - Add Mediatek MT7628A SoC - Allow NULL clock for clk_get_rate - Explicitly request exclusive reset control in the pci-mt7620 PCI driver. SEAD3: - Only include in 32 bit kernels by default VoCore: - Add VoCore as a vendor t0 dt-bindings - Add defconfig file" * '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits) MIPS: Refactor handling of stack pointer in get_frame_info MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems MIPS: microMIPS: Fix decoding of swsp16 instruction MIPS: microMIPS: Fix decoding of addiusp instruction MIPS: microMIPS: Fix detection of addiusp instruction MIPS: Handle non word sized instructions when examining frame MIPS: ralink: allow NULL clock for clk_get_rate MIPS: Loongson 2F: allow NULL clock for clk_get_rate MIPS: BCM63XX: allow NULL clock for clk_get_rate MIPS: AR7: allow NULL clock for clk_get_rate MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset mips: Save all registers when saving the frame MIPS: Add DWARF unwinding to assembly MIPS: Make SAVE_SOME more standard MIPS: Fix issues in backtraces MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree MIPS: Ci20: Enable RTC driver watchdog: octeon-wdt: Add support for 78XX SOCs. watchdog: octeon-wdt: Add support for cn68XX SOCs. watchdog: octeon-wdt: File cleaning. ...
2017-09-15Merge tag 'pci-v4.14-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Revert an attempt to fix a race while enabling upstream bridges because it broke iwlwifi firmware loading" * tag 'pci-v4.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: Avoid race while enabling upstream bridges"
2017-09-15Merge tag 'drm-fixes-for-v4.14-rc1' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm AMD fixes from Dave Airlie: "Just had a single AMD fixes pull from Alex for rc1" * tag 'drm-fixes-for-v4.14-rc1' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: revert "fix deadlock of reservation between cs and gpu reset v2" drm/amdgpu: remove duplicate return statement drm/amdgpu: check memory allocation failure drm/amd/amdgpu: fix BANK_SELECT on Vega10 (v2) drm/amdgpu: inline amdgpu_ttm_do_bind again drm/amdgpu: fix amdgpu_ttm_bind drm/amdgpu: remove the GART copy hack drm/ttm:fix wrong decoding of bo_count drm/ttm: fix missing inc bo_count drm/amdgpu: set sched_hw_submission higher for KIQ (v3) drm/amdgpu: move default gart size setting into gmc modules drm/amdgpu: refine default gart size drm/amd/powerplay: ACG frequency added in PPTable drm/amdgpu: discard commands of killed processes drm/amdgpu: fix and cleanup shadow handling drm/amdgpu: add automatic per asic settings for gart_size drm/amdgpu/gfx8: fix spelling typo in mqd allocation drm/amd/powerplay: unhalt mec after loading drm/amdgpu/virtual_dce: Virtual display doesn't support disable vblank immediately drm/amdgpu: Fix huge page updates with CPU
2017-09-15Merge branch 'i2c/for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "I2C has two more new drivers: Altera FPGA and STM32F7" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-stm32f7: add driver i2c: i2c-stm32f4: use generic definition of speed enum dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings i2c: altera: Add Altera I2C Controller driver dt-bindings: i2c: Add Altera I2C Controller
2017-09-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull more KVM updates from Paolo Bonzini: - PPC bugfixes - RCU splat fix - swait races fix - pointless userspace-triggerable BUG() fix - misc fixes for KVM_RUN corner cases - nested virt correctness fixes + one host DoS - some cleanups - clang build fix - fix AMD AVIC with default QEMU command line options - x86 bugfixes * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly kvm: vmx: Handle VMLAUNCH/VMRESUME failure properly kvm: nVMX: Remove nested_vmx_succeed after successful VM-entry kvm,mips: Fix potential swait_active() races kvm,powerpc: Serialize wq active checks in ops->vcpu_kick kvm: Serialize wq active checks in kvm_vcpu_wake_up() kvm,x86: Fix apf_task_wake_one() wq serialization kvm,lapic: Justify use of swait_active() kvm,async_pf: Use swq_has_sleeper() sched/wait: Add swq_has_sleeper() KVM: VMX: Do not BUG() on out-of-bounds guest IRQ KVM: Don't accept obviously wrong gsi values via KVM_IRQFD kvm: nVMX: Don't allow L2 to access the hardware CR8 KVM: trace events: update list of exit reasons KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously KVM: X86: Don't block vCPU if there is pending exception KVM: SVM: Add irqchip_split() checks before enabling AVIC KVM: Add struct kvm_vcpu pointer parameter to get_enable_apicv() KVM: SVM: Refactor AVIC vcpu initialization into avic_init_vcpu() KVM: x86: fix clang build ...
2017-09-15bpf/verifier: reject BPF_ALU64|BPF_ENDEdward Cree
Neither ___bpf_prog_run nor the JITs accept it. Also adds a new test case. Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15sctp: do not mark sk dumped when inet_sctp_diag_fill returns errXin Long
sctp_diag would not actually dump out sk/asoc if inet_sctp_diag_fill returns err, in which case it shouldn't mark sk dumped by setting cb->args[3] as 1 in sctp_sock_dump(). Otherwise, it could cause some asocs to have no parent's sk dumped in 'ss --sctp'. So this patch is to not set cb->args[3] when inet_sctp_diag_fill() returns err in sctp_sock_dump(). Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15sctp: fix an use-after-free issue in sctp_sock_dumpXin Long
Commit 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") tried to fix an use-after-free issue by checking !sctp_sk(sk)->ep with holding sock and sock lock. But Paolo noticed that endpoint could be destroyed in sctp_rcv without sock lock protection. It means the use-after-free issue still could be triggered when sctp_rcv put and destroy ep after sctp_sock_dump checks !ep, although it's pretty hard to reproduce. I could reproduce it by mdelay in sctp_rcv while msleep in sctp_close and sctp_sock_dump long time. This patch is to add another param cb_done to sctp_for_each_transport and dump ep->assocs with holding tsp after jumping out of transport's traversal in it to avoid this issue. It can also improve sctp diag dump to make it run faster, as no need to save sk into cb->args[5] and keep calling sctp_for_each_transport any more. This patch is also to use int * instead of int for the pos argument in sctp_for_each_transport, which could make postion increment only in sctp_for_each_transport and no need to keep changing cb->args[2] in sctp_sock_filter and sctp_sock_dump any more. Fixes: 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15netvsc: increase default receive buffer sizeStephen Hemminger
The default receive buffer size was reduced by recent change to a value which was appropriate for 10G and Windows Server 2016. But the value is too small for full performance with 40G on Azure. Increase the default back to maximum supported by host. Fixes: 8b5327975ae1 ("netvsc: allow controlling send/recv buffer size") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15tcp: update skb->skb_mstamp more carefullyEric Dumazet
liujian reported a problem in TCP_USER_TIMEOUT processing with a patch in tcp_probe_timer() : https://www.spinics.net/lists/netdev/msg454496.html After investigations, the root cause of the problem is that we update skb->skb_mstamp of skbs in write queue, even if the attempt to send a clone or copy of it failed. One reason being a routing problem. This patch prevents this, solving liujian issue. It also removes a potential RTT miscalculation, since __tcp_retransmit_skb() is not OR-ing TCP_SKB_CB(skb)->sacked with TCPCB_EVER_RETRANS if a failure happens, but skb->skb_mstamp has been changed. A future ACK would then lead to a very small RTT sample and min_rtt would then be lowered to this too small value. Tested: # cat user_timeout.pkt --local_ip=192.168.102.64 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 `ifconfig tun0 192.168.102.64/16; ip ro add 192.0.2.1 dev tun0` +0 < S 0:0(0) win 0 <mss 1460> +0 > S. 0:0(0) ack 1 <mss 1460> +.1 < . 1:1(0) ack 1 win 65530 +0 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_USER_TIMEOUT, [3000], 4) = 0 +0 write(4, ..., 24) = 24 +0 > P. 1:25(24) ack 1 win 29200 +.1 < . 1:1(0) ack 25 win 65530 //change the ipaddress +1 `ifconfig tun0 192.168.0.10/16` +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +0 `ifconfig tun0 192.168.102.64/16` +0 < . 1:2(1) ack 25 win 65530 +0 `ifconfig tun0 192.168.0.10/16` +3 write(4, ..., 24) = -1 # ./packetdrill user_timeout.pkt Signed-off-by: Eric Dumazet <edumazet@googl.com> Reported-by: liujian <liujian56@huawei.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-20 03:35:59 +0000