summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-01-10arm64: dts: marvell: mcbin: fix PCIe reset signalBaruch Siach
The MPP52 signal is on the seconds GPIO instance of CP0, which corresponds to the &cp0_gpio2 handle. Rename the property name to the standard '-gpios' suffix while at it. Fixes: b83e1669adce6 ("arm64: dts: marvell: mcbin: add support for PCIe") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-10arm64: dts: marvell: armada-ap806: reserve PSCI areaHeinrich Schuchardt
The memory area [0x4000000-0x4200000[ is occupied by the PSCI firmware. Any attempt to access it from Linux leads to an immediate crash. So let's make the same memory reservation as the vendor kernel. [gregory: added as comment that this region matches the mainline U-boot] Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-10arm64: asm-prototypes: Fix fat-fingered typo in commentWill Deacon
Some of the right letters, not necessarily in the right order: CONFIG_MODEVERIONS -> CONFIG_MODVERSIONS Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-10mm/mmu_notifier: mm/rmap.c: Fix a mmu_notifier range bug in try_to_unmap_oneSean Christopherson
The conversion to use a structure for mmu_notifier_invalidate_range_*() unintentionally changed the usage in try_to_unmap_one() to init the 'struct mmu_notifier_range' with vma->vm_start instead of @address, i.e. it invalidates the wrong address range. Revert to the correct address range. Manifests as KVM use-after-free WARNINGs and subsequent "BUG: Bad page state in process X" errors when reclaiming from a KVM guest due to KVM removing the wrong pages from its own mappings. Reported-by: leozinho29_eu@hotmail.com Reported-by: Mike Galbraith <efault@gmx.de> Reported-and-tested-by: Adam Borowski <kilobyte@angband.pl> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Pankaj gupta <pagupta@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: ac46d4f3c432 ("mm/mmu_notifier: use structure for invalidate_range_start/end calls v2") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-10gpu/drm: Fix lock held when returning to user space.Tetsuo Handa
We need to call drm_modeset_acquire_fini() when drm_atomic_state_alloc() failed or call drm_modeset_acquire_init() after drm_atomic_state_alloc() succeeded. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+6ea337c427f5083ebdf2@syzkaller.appspotmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1547115571-21219-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
2019-01-10PM-runtime: Fix autosuspend_delay on 32bits archVincent Guittot
Cast autosuspend_delay to u64 to make sure that the full computation of 'expires' or slack will be done in u64, even on 32bits arch. Otherwise, any delay greater than 2^31 nsec can overflow if signed 32bits is used when converting delay from msec to nsec. Fixes: 8234f6734c5d (PM-runtime: Switch autosuspend over to using hrtimers) Reported-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-10PM-runtime: Fix 'jiffies' in comments after switch to hrtimersLadislav Michl
PM-runtime now uses the hrtimers infrastructure for autosuspend, however comments still reference 'jiffies'. Fixes: 8234f6734c5d (PM-runtime: Switch autosuspend over to using hrtimers) Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-10rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is setIlya Dryomov
There is a window between when RBD_DEV_FLAG_REMOVING is set and when the device is removed from rbd_dev_list. During this window, we set "already" and return 0. Returning 0 from write(2) can confuse userspace tools because 0 indicates that nothing was written. In particular, "rbd unmap" will retry the write multiple times a second: 10:28:05.463299 write(4, "0", 1) = 0 10:28:05.463509 write(4, "0", 1) = 0 10:28:05.463720 write(4, "0", 1) = 0 10:28:05.463942 write(4, "0", 1) = 0 10:28:05.464155 write(4, "0", 1) = 0 Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-01-10ARM: dts: da850-lcdk: Correct the sound card namePeter Ujfalusi
To avoid the following error: asoc-simple-card sound: ASoC: Failed to create card debugfs directory Which is because the card name contains '/' character, which can not be used in file or directory names. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: dts: da850-lcdk: Correct the audio codec regulatorsPeter Ujfalusi
Add the board level fixed regulators for 3.3V and 1.8V which is used to power - among other things - the tlv320aic3106 codec. Apart from removing the following warning during boot: tlv320aic3x-codec 0-0018: Invalid supply voltage(s) AVDD: -22, DVDD: -22 With the correct voltages the driver can select correct OCMV value to reduce pop noise. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: dts: da850-evm: Correct the sound card namePeter Ujfalusi
To avoid the following error: asoc-simple-card sound: ASoC: Failed to create card debugfs directory Which is because the card name contains '/' character, which can not be used in file or directory names. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: dts: da850-evm: Correct the audio codec regulatorsPeter Ujfalusi
Add the board level fixed regulators for 3.3V and 1.8V which is used to power - among other things - the tlv320aic3106 codec. Apart from removing the following warning during boot: tlv320aic3x-codec 0-0018: Too high supply voltage(s) AVDD: 5000000, DVDD: 5000000 With the correct voltages the driver can select correct OCMV value to reduce pop noise. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entriesBartosz Golaszewski
Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: dm644x-evm: fix label names in GPIO lookup entriesBartosz Golaszewski
Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: dm355-evm: fix label names in GPIO lookup entriesBartosz Golaszewski
Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: da850-evm: fix label names in GPIO lookup entriesBartosz Golaszewski
Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: da830-evm: fix label names in GPIO lookup entriesBartosz Golaszewski
Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclockIvan Mironov
Strict requirement of pixclock to be zero breaks support of SDL 1.2 which contains hardcoded table of supported video modes with non-zero pixclock values[1]. To better understand which pixclock values are considered valid and how driver should handle these values, I briefly examined few existing fbdev drivers and documentation in Documentation/fb/. And it looks like there are no strict rules on that and actual behaviour varies: * some drivers treat (pixclock == 0) as "use defaults" (uvesafb.c); * some treat (pixclock == 0) as invalid value which leads to -EINVAL (clps711x-fb.c); * some pass converted pixclock value to hardware (uvesafb.c); * some are trying to find nearest value from predefined table (vga16fb.c, video_gx.c). Given this, I believe that it should be safe to just ignore this value if changing is not supported. It seems that any portable fbdev application which was not written only for one specific device working under one specific kernel version should not rely on any particular behaviour of pixclock anyway. However, while enabling SDL1 applications to work out of the box when there is no /etc/fb.modes with valid settings, this change affects the video mode choosing logic in SDL. Depending on current screen resolution, contents of /etc/fb.modes and resolution requested by application, this may lead to user-visible difference (not always): image will be displayed in a right way, but it will be aligned to the left instead of center. There is no "right behaviour" here as well, as emulated fbdev, opposing to old fbdev drivers, simply ignores any requsts of video mode changes with resolutions smaller than current. The easiest way to reproduce this problem is to install sdl-sopwith[2], remove /etc/fb.modes file if it exists, and then try to run sopwith from console without X. At least in Fedora 29, sopwith may be simply installed from standard repositories. [1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, vesa_timings [2] http://sdl-sopwith.sourceforge.net/ Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> Cc: stable@vger.kernel.org Fixes: 79e539453b34e ("DRM: i915: add mode setting support") Fixes: 771fe6b912fca ("drm/radeon: introduce kernel modesetting for radeon hardware") Fixes: 785b93ef8c309 ("drm/kms: move driver specific fb common code to helper functions (v2)") Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-3-mironov.ivan@gmail.com
2019-01-10drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2Ivan Mironov
SDL 1.2 sets all fields related to the pixel format to zero in some cases[1]. Prior to commit db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests"), there was an unintentional workaround for this that existed for more than a decade. First in device-specific DRM drivers, then here in drm_fb_helper.c. Previous code containing this workaround just ignores pixel format fields from userspace code. Not a good thing either, as this way, driver may silently use pixel format different from what client actually requested, and this in turn will lead to displaying garbage on the screen. I think that returning EINVAL to userspace in this particular case is the right option, so I decided to left code from problematic commit untouched instead of just reverting it entirely. Here is the steps required to reproduce this problem exactly: 1) Compile fceux[2] with SDL 1.2.15 and without GTK or OpenGL support. SDL should be compiled with fbdev support (which is on by default). 2) Create /etc/fb.modes with following contents (values seems not used, and just required to trigger problematic code in SDL): mode "test" geometry 1 1 1 1 1 timings 1 1 1 1 1 1 1 endmode 3) Create ~/.fceux/fceux.cfg with following contents: SDL.Hotkeys.Quit = 27 SDL.DoubleBuffering = 1 4) Ensure that screen resolution is at least 1280x960 (e.g. append "video=Virtual-1:1280x960-32" to the kernel cmdline for qemu/QXL). 5) Try to run fceux on VT with some ROM file[3]: # ./fceux color_test.nes [1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, FB_SetVideoMode() [2] http://www.fceux.com [3] Example ROM: https://github.com/bokuweb/rustynes/blob/master/roms/color_test.nes Reported-by: saahriktu <mail@saahriktu.org> Suggested-by: saahriktu <mail@saahriktu.org> Cc: stable@vger.kernel.org Fixes: db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests") Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> [danvet: Delete misleading comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com
2019-01-09loop: drop caches if offset or block_size are changedJaegeuk Kim
If we don't drop caches used in old offset or block_size, we can get old data from new offset/block_size, which gives unexpected data to user. For example, Martijn found a loopback bug in the below scenario. 1) LOOP_SET_FD loads first two pages on loop file 2) LOOP_SET_STATUS64 changes the offset on the loop file 3) mount is failed due to the cached pages having wrong superblock Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Reported-by: Martijn Coenen <maco@google.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-09tty/serial: Add RISC-V SBI earlycon supportAnup Patel
In RISC-V, the M-mode runtime firmware provide SBI calls for debug prints. This patch adds earlycon support using RISC-V SBI console calls. To enable it, just pass "earlycon=sbi" in kernel parameters. Signed-off-by: Anup Patel <anup@brainfault.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-09block: fix kerneldoc comment for blk_attempt_plug_merge()Jonathan Corbet
Commit 5f0ed774ed29 ("block: sum requests in the plug structure") removed the request_count parameter from block_attempt_plug_merge(), but did not remove the associated kerneldoc comment, introducing this warning to the docs build: ./block/blk-core.c:685: warning: Excess function parameter 'request_count' description in 'blk_attempt_plug_merge' Remove the obsolete description and make things a little quieter. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-09drm/amdgpu: disable system memory page tables for nowChristian König
We hit a problem with IOMMU with that. Disable until we have time to debug further. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-09drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hangJim Qu
effect asics: VEGA10 and VEGA12 Signed-off-by: Jim Qu <Jim.Qu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-09drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20Tao Zhou
Fix CPDMA hang in PRT mode for both VEGA10 and VEGA20 Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Tested-by: Yukun.Li <yukun1.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-09perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbolsArnaldo Carvalho de Melo
When testing 'perf top' on a armhf system (32-bit, Orange Pi Zero), I noticed that 'arch_cpu_idle' dominated, add it to the list of idle symbols, so that we can see what is that being done when not idle. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-4q2b5g4p2hrstrhp9t2mrlho@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-09nvme: don't initlialize ctrl->cntlid twiceAndrey Smirnov
ctrl->cntlid will already be initialized from id->cntlid for non-NVME_F_FABRICS controllers few lines below. For NVME_F_FABRICS controllers this field should already be initialized, otherwise the check if (ctrl->cntlid != le16_to_cpu(id->cntlid)) below will always be a no-op. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQNJames Dingwall
If a device provides an NQN it is expected to be globally unique. Unfortunately some firmware revisions for Intel 760p/Pro 7600p devices did not satisfy this requirement. In these circumstances if a system has >1 affected device then only one device is enabled. If this quirk is enabled then the device supplied subnqn is ignored and we fallback to generating one as if the field was empty. In this case we also suppress the version check so we don't print a warning when the quirk is enabled. Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: James Dingwall <james@dingwall.me.uk> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme: pad fake subsys NQN vid and ssvid with zerosKeith Busch
We need to preserve the leading zeros in the vid and ssvid when generating a unique NQN. Truncating these may lead to naming collisions. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-multipath: zero out ANA log bufferHannes Reinecke
When nvme_init_identify() fails the ANA log buffer is deallocated but _not_ set to NULL. This can cause double free oops when this controller is deleted without ever being reconnected. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-fabrics: unset write/poll queues for discovery controllersSagi Grimberg
Even if user-space sent it to us, it got it wrong so lets help by disallowing it. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-tcp: don't ask if controller is fabricsSagi Grimberg
For sure we are a fabric driver. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-tcp: remove dead codeSagi Grimberg
We should never touch the opal device from the transport driver. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: fix out of bounds access in nvme_cqe_pendingHongbo Yao
There is an out of bounds array access in nvme_cqe_peding(). When enable irq_thread for nvme interrupt, there is racing between the nvmeq->cq_head updating and reading. nvmeq->cq_head is updated in nvme_update_cq_head(), if nvmeq->cq_head equals nvmeq->q_depth and before its value set to zero, nvme_cqe_pending() uses its value as an array index, the index will be out of bounds. Signed-off-by: Hongbo Yao <yaohongbo@huawei.com> [hch: slight coding style update] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: rerun irq setup on IO queue init errorsKeith Busch
If the driver is unable to create a subset of IO queues for any reason, the read/write and polled queue sets will not match the actual allocated hardware contexts. This leaves gaps in the CPU affinity mappings and causes the following kernel panic after blk_mq_map_queue_type() returns a NULL hctx. BUG: unable to handle kernel NULL pointer dereference at 0000000000000198 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 64 PID: 1171 Comm: kworker/u259:1 Not tainted 4.20.0+ #241 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 Workqueue: nvme-wq nvme_scan_work [nvme_core] RIP: 0010:blk_mq_init_allocated_queue+0x2d9/0x440 RSP: 0018:ffffb1bf0abc3cd0 EFLAGS: 00010286 RAX: 000000000000001f RBX: ffff8ea744cf0718 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 000000000000007c RDI: ffffffff9109a820 RBP: ffff8ea7565f7008 R08: 000000000000001f R09: 000000000000003f R10: ffffb1bf0abc3c00 R11: 0000000000000000 R12: 000000000001d008 R13: ffff8ea7565f7008 R14: 000000000000003f R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8ea757200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000198 CR3: 0000000013058000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: blk_mq_init_queue+0x35/0x60 nvme_validate_ns+0xc6/0x7c0 [nvme_core] ? nvme_identify_ctrl.isra.56+0x7e/0xc0 [nvme_core] nvme_scan_work+0xc8/0x340 [nvme_core] ? __wake_up_common+0x6d/0x120 ? try_to_wake_up+0x55/0x410 process_one_work+0x1e9/0x3d0 worker_thread+0x2d/0x3d0 ? process_one_work+0x3d0/0x3d0 kthread+0x111/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 Modules linked in: nvme nvme_core serio_raw CR2: 0000000000000198 Fix by re-running the interrupt vector setup from scratch using a reduced count that may be successful until the created queues matches the irq affinity plus polling queue sets. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: use the same attributes when freeing host_mem_desc_bufs.Liviu Dudau
When using HMB the PCIe host driver allocates host_mem_desc_bufs using dma_alloc_attrs() but frees them using dma_free_coherent(). Use the correct dma_free_attrs() function to free the buffers. Signed-off-by: Liviu Dudau <liviu@dudau.co.uk> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: fix the wrong setting of nr_mapsJianchao Wang
We only set the nr_maps to 3 if poll queues are supported. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09Merge tag 'csky-for-linus-5.0-rc1' of git://github.com/c-sky/csky-linuxLinus Torvalds
Pull arch/csky bug fixes from Guo Ren: "Here are some fixup patches for 5.0-rc1: - fix compile error with pte_alloc - fix handle_irq_perbit break irq flow - fix CACHEV1 store instruction fast retire - fix module relocation error with 807 & 860 - add csky kernel features to documentation" * tag 'csky-for-linus-5.0-rc1' of git://github.com/c-sky/csky-linux: irqchip/csky: fixup handle_irq_perbit break irq csky: fixup compile error with pte_alloc csky: fixup CACHEV1 store instruction fast retire csky: fixup relocation error with 807 & 860 Documentation/features: Add csky kernel features
2019-01-09block: doc: add slice_idle_us to bfq documentationJohn Pittman
Of the tunables available for the bfq I/O scheduler, the only one missing from the documentation in 'Documentation/block/bfq-iosched.txt' is slice_idle_us. Add this tunable to the documentation and a short explanation of its purpose. Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: John Pittman <jpittman@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-09Btrfs: fix deadlock when using free space tree due to block group creationFilipe Manana
When modifying the free space tree we can end up COWing one of its extent buffers which in turn might result in allocating a new chunk, which in turn can result in flushing (finish creation) of pending block groups. If that happens we can deadlock because creating a pending block group needs to update the free space tree, and if any of the updates tries to modify the same extent buffer that we are COWing, we end up in a deadlock since we try to write lock twice the same extent buffer. So fix this by skipping pending block group creation if we are COWing an extent buffer from the free space tree. This is a case missed by commit 5ce555578e091 ("Btrfs: fix deadlock when writing out free space caches"). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202173 Fixes: 5ce555578e091 ("Btrfs: fix deadlock when writing out free space caches") CC: stable@vger.kernel.org # 4.18+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-09Btrfs: fix race between reflink/dedupe and relocationFilipe Manana
The recent rework that makes btrfs' remap_file_range operation use the generic helper generic_remap_file_range_prep() introduced a race between relocation and reflinking (for both cloning and deduplication) the file extents between the source and destination inodes. This happens because we no longer lock the source range anymore, and we do not lock it anymore because we wait for direct IO writes and writeback to complete early on the code path right after locking the inodes, which guarantees no other file operations interfere with the reflinking. However there is one exception which is relocation, since it replaces the byte number of file extents items in the fs tree after locking the range the file extent items represent. This is a problem because after finding each file extent to clone in the fs tree, the reflink process copies the file extent item into a local buffer, releases the search path, inserts new file extent items in the destination range and then increments the reference count for the extent mentioned in the file extent item that it previously copied to the buffer. If right after copying the file extent item into the buffer and releasing the path the relocation process updates the file extent item to point to the new extent, the reflink process ends up creating a delayed reference to increment the reference count of the old extent, for which the relocation process already created a delayed reference to drop it. This results in failure to run delayed references because we will attempt to increment the count of a reference that was already dropped. This is illustrated by the following diagram: CPU 1 CPU 2 relocation is running btrfs_clone_files() btrfs_clone() --> finds extent item in source range point to extent at bytenr X --> copies it into a local buffer --> releases path replace_file_extents() --> successfully locks the range represented by the file extent item --> replaces disk_bytenr field in the file extent item with some other value Y --> creates delayed reference to increment reference count for extent at bytenr Y --> creates delayed reference to drop the extent at bytenr X --> starts transaction --> creates delayed reference to increment extent at bytenr X <delayed references are run, due to a transaction commit for example, and the transaction is aborted with -EIO because we attempt to increment reference count for the extent at bytenr X after we freed it> When this race is hit the running transaction ends up getting aborted with an -EIO error and a trace like the following is produced: [ 4382.553858] WARNING: CPU: 2 PID: 3648 at fs/btrfs/extent-tree.c:1552 lookup_inline_extent_backref+0x4f4/0x650 [btrfs] (...) [ 4382.556293] CPU: 2 PID: 3648 Comm: btrfs Tainted: G W 4.20.0-rc6-btrfs-next-41 #1 [ 4382.556294] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [ 4382.556308] RIP: 0010:lookup_inline_extent_backref+0x4f4/0x650 [btrfs] (...) [ 4382.556310] RSP: 0018:ffffac784408f738 EFLAGS: 00010202 [ 4382.556311] RAX: 0000000000000001 RBX: ffff8980673c3a48 RCX: 0000000000000001 [ 4382.556312] RDX: 0000000000000008 RSI: 0000000000000000 RDI: 0000000000000000 [ 4382.556312] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 [ 4382.556313] R10: 0000000000000001 R11: ffff897f40000000 R12: 0000000000001000 [ 4382.556313] R13: 00000000c224f000 R14: ffff89805de9bd40 R15: ffff8980453f4548 [ 4382.556315] FS: 00007f5e759178c0(0000) GS:ffff89807b300000(0000) knlGS:0000000000000000 [ 4382.563130] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4382.563562] CR2: 00007f2e9789fcbc CR3: 0000000120512001 CR4: 00000000003606e0 [ 4382.564005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4382.564451] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4382.564887] Call Trace: [ 4382.565343] insert_inline_extent_backref+0x55/0xe0 [btrfs] [ 4382.565796] __btrfs_inc_extent_ref.isra.60+0x88/0x260 [btrfs] [ 4382.566249] ? __btrfs_run_delayed_refs+0x93/0x1650 [btrfs] [ 4382.566702] __btrfs_run_delayed_refs+0xa22/0x1650 [btrfs] [ 4382.567162] btrfs_run_delayed_refs+0x7e/0x1d0 [btrfs] [ 4382.567623] btrfs_commit_transaction+0x50/0x9c0 [btrfs] [ 4382.568112] ? _raw_spin_unlock+0x24/0x30 [ 4382.568557] ? block_rsv_release_bytes+0x14e/0x410 [btrfs] [ 4382.569006] create_subvol+0x3c8/0x830 [btrfs] [ 4382.569461] ? btrfs_mksubvol+0x317/0x600 [btrfs] [ 4382.569906] btrfs_mksubvol+0x317/0x600 [btrfs] [ 4382.570383] ? rcu_sync_lockdep_assert+0xe/0x60 [ 4382.570822] ? __sb_start_write+0xd4/0x1c0 [ 4382.571262] ? mnt_want_write_file+0x24/0x50 [ 4382.571712] btrfs_ioctl_snap_create_transid+0x117/0x1a0 [btrfs] [ 4382.572155] ? _copy_from_user+0x66/0x90 [ 4382.572602] btrfs_ioctl_snap_create+0x66/0x80 [btrfs] [ 4382.573052] btrfs_ioctl+0x7c1/0x30e0 [btrfs] [ 4382.573502] ? mem_cgroup_commit_charge+0x8b/0x570 [ 4382.573946] ? do_raw_spin_unlock+0x49/0xc0 [ 4382.574379] ? _raw_spin_unlock+0x24/0x30 [ 4382.574803] ? __handle_mm_fault+0xf29/0x12d0 [ 4382.575215] ? do_vfs_ioctl+0xa2/0x6f0 [ 4382.575622] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [ 4382.576020] do_vfs_ioctl+0xa2/0x6f0 [ 4382.576405] ksys_ioctl+0x70/0x80 [ 4382.576776] __x64_sys_ioctl+0x16/0x20 [ 4382.577137] do_syscall_64+0x60/0x1b0 [ 4382.577488] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [ 4382.578837] RSP: 002b:00007ffe04bf64c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 4382.579174] RAX: ffffffffffffffda RBX: 00005564136f3050 RCX: 00007f5e74724dd7 [ 4382.579505] RDX: 00007ffe04bf64d0 RSI: 000000005000940e RDI: 0000000000000003 [ 4382.579848] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000044 [ 4382.580164] R10: 0000000000000541 R11: 0000000000000202 R12: 00005564136f3010 [ 4382.580477] R13: 0000000000000003 R14: 00005564136f3035 R15: 00005564136f3050 [ 4382.580792] irq event stamp: 0 [ 4382.581106] hardirqs last enabled at (0): [<0000000000000000>] (null) [ 4382.581441] hardirqs last disabled at (0): [<ffffffff8d085842>] copy_process.part.32+0x6e2/0x2320 [ 4382.581772] softirqs last enabled at (0): [<ffffffff8d085842>] copy_process.part.32+0x6e2/0x2320 [ 4382.582095] softirqs last disabled at (0): [<0000000000000000>] (null) [ 4382.582413] ---[ end trace d3c188e3e9367382 ]--- [ 4382.623855] BTRFS: error (device sdc) in btrfs_run_delayed_refs:2981: errno=-5 IO failure [ 4382.624295] BTRFS info (device sdc): forced readonly Fix this by locking the source range before searching for the file extent items in the fs tree, since the relocation process will try to lock the range a file extent item represents before updating it with the new extent location. Fixes: 34a28e3d7753 ("Btrfs: use generic_remap_file_range_prep() for cloning and deduplication") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-09Btrfs: fix race between cloning range ending at eof and writebackFilipe Manana
The recent rework that makes btrfs' remap_file_range operation use the generic helper generic_remap_file_range_prep() introduced a race between writeback and cloning a range that covers the eof extent of the source file into a destination offset that is greater then the same file's size. This happens because we now wait for writeback to complete before doing the truncation of the eof block, while previously we did the truncation and then waited for writeback to complete. This leads to a race between writeback of the truncated block and cloning the file extents in the source range, because we copy each file extent item we find in the fs root into a buffer, then release the path and then increment the reference count for the extent referred in that file extent item we copied, which can no longer exist if writeback of the truncated eof block completes after we copied the file extent item into the buffer and before we incremented the reference count. This is illustrated by the following diagram: CPU 1 CPU 2 btrfs_clone_files() btrfs_cont_expand() btrfs_truncate_block() --> zeroes part of the page containg eof, marking it for delalloc btrfs_clone() --> finds extent item covering eof, points to extent at bytenr X --> copies it into a local buffer --> releases path writeback starts btrfs_finish_ordered_io() insert_reserved_file_extent() __btrfs_drop_extents() --> creates delayed reference to drop the extent at bytenr X --> starts transaction --> creates delayed reference to increment extent at bytenr X <delayed references are run, due to a transaction commit for example, and the transaction is aborted with -EIO because we attempt to increment reference count for the extent at bytenr X after we freed it> When this race is hit the running transaction ends up getting aborted with an -EIO error and a trace like the following is produced: [ 4382.553858] WARNING: CPU: 2 PID: 3648 at fs/btrfs/extent-tree.c:1552 lookup_inline_extent_backref+0x4f4/0x650 [btrfs] (...) [ 4382.556293] CPU: 2 PID: 3648 Comm: btrfs Tainted: G W 4.20.0-rc6-btrfs-next-41 #1 [ 4382.556294] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [ 4382.556308] RIP: 0010:lookup_inline_extent_backref+0x4f4/0x650 [btrfs] (...) [ 4382.556310] RSP: 0018:ffffac784408f738 EFLAGS: 00010202 [ 4382.556311] RAX: 0000000000000001 RBX: ffff8980673c3a48 RCX: 0000000000000001 [ 4382.556312] RDX: 0000000000000008 RSI: 0000000000000000 RDI: 0000000000000000 [ 4382.556312] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 [ 4382.556313] R10: 0000000000000001 R11: ffff897f40000000 R12: 0000000000001000 [ 4382.556313] R13: 00000000c224f000 R14: ffff89805de9bd40 R15: ffff8980453f4548 [ 4382.556315] FS: 00007f5e759178c0(0000) GS:ffff89807b300000(0000) knlGS:0000000000000000 [ 4382.563130] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4382.563562] CR2: 00007f2e9789fcbc CR3: 0000000120512001 CR4: 00000000003606e0 [ 4382.564005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4382.564451] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4382.564887] Call Trace: [ 4382.565343] insert_inline_extent_backref+0x55/0xe0 [btrfs] [ 4382.565796] __btrfs_inc_extent_ref.isra.60+0x88/0x260 [btrfs] [ 4382.566249] ? __btrfs_run_delayed_refs+0x93/0x1650 [btrfs] [ 4382.566702] __btrfs_run_delayed_refs+0xa22/0x1650 [btrfs] [ 4382.567162] btrfs_run_delayed_refs+0x7e/0x1d0 [btrfs] [ 4382.567623] btrfs_commit_transaction+0x50/0x9c0 [btrfs] [ 4382.568112] ? _raw_spin_unlock+0x24/0x30 [ 4382.568557] ? block_rsv_release_bytes+0x14e/0x410 [btrfs] [ 4382.569006] create_subvol+0x3c8/0x830 [btrfs] [ 4382.569461] ? btrfs_mksubvol+0x317/0x600 [btrfs] [ 4382.569906] btrfs_mksubvol+0x317/0x600 [btrfs] [ 4382.570383] ? rcu_sync_lockdep_assert+0xe/0x60 [ 4382.570822] ? __sb_start_write+0xd4/0x1c0 [ 4382.571262] ? mnt_want_write_file+0x24/0x50 [ 4382.571712] btrfs_ioctl_snap_create_transid+0x117/0x1a0 [btrfs] [ 4382.572155] ? _copy_from_user+0x66/0x90 [ 4382.572602] btrfs_ioctl_snap_create+0x66/0x80 [btrfs] [ 4382.573052] btrfs_ioctl+0x7c1/0x30e0 [btrfs] [ 4382.573502] ? mem_cgroup_commit_charge+0x8b/0x570 [ 4382.573946] ? do_raw_spin_unlock+0x49/0xc0 [ 4382.574379] ? _raw_spin_unlock+0x24/0x30 [ 4382.574803] ? __handle_mm_fault+0xf29/0x12d0 [ 4382.575215] ? do_vfs_ioctl+0xa2/0x6f0 [ 4382.575622] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [ 4382.576020] do_vfs_ioctl+0xa2/0x6f0 [ 4382.576405] ksys_ioctl+0x70/0x80 [ 4382.576776] __x64_sys_ioctl+0x16/0x20 [ 4382.577137] do_syscall_64+0x60/0x1b0 [ 4382.577488] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [ 4382.578837] RSP: 002b:00007ffe04bf64c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 4382.579174] RAX: ffffffffffffffda RBX: 00005564136f3050 RCX: 00007f5e74724dd7 [ 4382.579505] RDX: 00007ffe04bf64d0 RSI: 000000005000940e RDI: 0000000000000003 [ 4382.579848] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000044 [ 4382.580164] R10: 0000000000000541 R11: 0000000000000202 R12: 00005564136f3010 [ 4382.580477] R13: 0000000000000003 R14: 00005564136f3035 R15: 00005564136f3050 [ 4382.580792] irq event stamp: 0 [ 4382.581106] hardirqs last enabled at (0): [<0000000000000000>] (null) [ 4382.581441] hardirqs last disabled at (0): [<ffffffff8d085842>] copy_process.part.32+0x6e2/0x2320 [ 4382.581772] softirqs last enabled at (0): [<ffffffff8d085842>] copy_process.part.32+0x6e2/0x2320 [ 4382.582095] softirqs last disabled at (0): [<0000000000000000>] (null) [ 4382.582413] ---[ end trace d3c188e3e9367382 ]--- [ 4382.623855] BTRFS: error (device sdc) in btrfs_run_delayed_refs:2981: errno=-5 IO failure [ 4382.624295] BTRFS info (device sdc): forced readonly Fix this by waiting for writeback to complete after truncating the eof block. Fixes: 34a28e3d7753 ("Btrfs: use generic_remap_file_range_prep() for cloning and deduplication") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-09tools include uapi: Sync linux/if_link.h copy with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes from: a428afe82f98 ("net: bridge: add support for user-controlled bool options") a025fb5f49ad ("geneve: Allow configuration of DF behaviour") b4d3069783bc ("vxlan: Allow configuration of DF behaviour") Silencing this tools/ build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Stefano Brivio <sbrivio@redhat.com> Link: https://lkml.kernel.org/n/tip-wq410s2wuqv5k980bidw0ju8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-09cpufreq: scmi: Fix frequency invariance in slow pathQuentin Perret
The scmi-cpufreq driver calls the arch_set_freq_scale() callback on frequency changes to provide scale-invariant load-tracking signals to the scheduler. However, in the slow path, it does so while specifying the current and max frequencies in different units, hence resulting in a broken freq_scale factor. Fix this by passing all frequencies in KHz, as stored in the CPUFreq frequency table. Fixes: 99d6bdf33877 (cpufreq: add support for CPU DVFS based on SCMI message protocol) Signed-off-by: Quentin Perret <quentin.perret@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: 4.17+ <stable@vger.kernel.org> # v4.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-09doc: trace: fix reference to cpuidle documentation fileOtto Sabart
Old cpuidle/sysfs.txt file was replaced in aa5eee355b46. So, refer to an updated file. Fixes: aa5eee355b46 (Documentation: admin-guide: PM: Add cpuidle document) Signed-off-by: Otto Sabart <ottosabart@seberm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-09drm/bridge: tc358767: use DP connector if no panel setTomi Valkeinen
tc358767 driver sets the connector type always to eDP. This patch sets the type to DP if there is no panel defined, which implies that there's a DP connector on the board. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-8-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: fix output H/V syncsTomi Valkeinen
The H and V syncs of the DP output are always set to active high. This patch fixes the syncs by configuring them according to the videomode. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-7-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: reject modes which require too much BWTomi Valkeinen
The current driver accepts any videomode with pclk < 154MHz. This is not correct, as with 1 lane and/or 1.62Mbps speed not all videomodes can be supported. Add code to reject modes that require more bandwidth that is available. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-6-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: fix initial DP0/1_SRCCTRL valueTomi Valkeinen
Initially DP0_SRCCTRL is set to a static value which includes DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of 1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number. This patch changes the configuration as follows: Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct value. DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL: SSCG and BW27. All other bits can be zero. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-5-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: fix single lane configurationTomi Valkeinen
PHY_2LANE bit is always set in DP_PHY_CTRL, breaking 1 lane use. Set PHY_2LANE only when 2 lanes are used. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-4-tomi.valkeinen@ti.com
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 23:14:54 +0000