summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-12-21Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "One core framework fix to walk the orphan list and match up clks to parents when clk providers register the DT provider after registering all their clks (as they should). Then a handful of driver fixes for the qcom, imx, and at91 drivers. The driver fixes are relatively small fixes for incorrect register settings or missing locks causing race conditions" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: Avoid SMMU/cx gdsc corner cases clk: qcom: gcc-sc7180: Fix setting flag for votable GDSCs clk: Move clk_core_reparent_orphans() under CONFIG_OF clk: at91: fix possible deadlock clk: walk orphan list on clock provider registration clk: imx: pll14xx: fix clk_pll14xx_wait_lock clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_table clk: imx: clk-composite-8m: add lock to gate/mux
2019-12-20Merge branch 'sfc-fix-bugs-introduced-by-XDP-patches'David S. Miller
Edward Cree says: ==================== sfc: fix bugs introduced by XDP patches Two fixes for bugs introduced by the XDP support in the sfc driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20sfc: Include XDP packet headroom in buffer step size.Charles McLachlan
Correct a mismatch between rx_page_buf_step and the actual step size used when filling buffer pages. This patch fixes the page overrun that occured when the MTU was set to anything bigger than 1692. Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues") Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20sfc: fix channel allocation with brute forceEdward Cree
It was possible for channel allocation logic to get confused between what it had and what it wanted, and end up trying to use the same channel for both PTP and regular TX. This led to a kernel panic: BUG: unable to handle page fault for address: 0000000000047635 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.4.0-rc3-ehc14+ #900 Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013 RIP: 0010:native_queued_spin_lock_slowpath+0x188/0x1e0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb e8 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 c0 98 02 00 48 03 04 f5 a0 c6 ed 81 <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffc90000003d28 EFLAGS: 00010006 RAX: 0000000000047635 RBX: 0000000000000246 RCX: 0000000000040000 RDX: ffff888627a298c0 RSI: 0000000000003ffe RDI: ffff88861f6b8dd4 RBP: ffff8886225c6e00 R08: 0000000000040000 R09: 0000000000000000 R10: 0000000616f080c6 R11: 00000000000000c0 R12: ffff88861f6b8dd4 R13: ffffc90000003dc8 R14: ffff88861942bf00 R15: ffff8886150f2000 FS: 0000000000000000(0000) GS:ffff888627a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000047635 CR3: 000000000200a000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x22/0x30 skb_queue_tail+0x1b/0x50 sock_queue_err_skb+0x9d/0xf0 __skb_complete_tx_timestamp+0x9d/0xc0 efx_dequeue_buffer+0x126/0x180 [sfc] efx_xmit_done+0x73/0x1c0 [sfc] efx_ef10_ev_process+0x56a/0xfe0 [sfc] ? tick_sched_do_timer+0x60/0x60 ? timerqueue_add+0x5d/0x70 ? enqueue_hrtimer+0x39/0x90 efx_poll+0x111/0x380 [sfc] ? rcu_accelerate_cbs+0x50/0x160 net_rx_action+0x14a/0x400 __do_softirq+0xdd/0x2d0 irq_exit+0xa0/0xb0 do_IRQ+0x53/0xe0 common_interrupt+0xf/0xf </IRQ> In the long run we intend to rewrite the channel allocation code, but for 'net' fix this by allocating extra_channels, and giving them TX queues, even if we do not in fact need them (e.g. on NICs without MAC TX timestamping), and thereby using simpler logic to assign the channels once they're allocated. Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: dst: Force 4-byte alignment of dst_metricsGeert Uytterhoeven
When storing a pointer to a dst_metrics structure in dst_entry._metrics, two flags are added in the least significant bits of the pointer value. Hence this assumes all pointers to dst_metrics structures have at least 4-byte alignment. However, on m68k, the minimum alignment of 32-bit values is 2 bytes, not 4 bytes. Hence in some kernel builds, dst_default_metrics may be only 2-byte aligned, leading to obscure boot warnings like: WARNING: CPU: 0 PID: 7 at lib/refcount.c:28 refcount_warn_saturate+0x44/0x9a refcount_t: underflow; use-after-free. Modules linked in: CPU: 0 PID: 7 Comm: ksoftirqd/0 Tainted: G W 5.5.0-rc2-atari-01448-g114a1a1038af891d-dirty #261 Stack from 10835e6c: 10835e6c 0038134f 00023fa6 00394b0f 0000001c 00000009 00321560 00023fea 00394b0f 0000001c 001a70f8 00000009 00000000 10835eb4 00000001 00000000 04208040 0000000a 00394b4a 10835ed4 00043aa8 001a70f8 00394b0f 0000001c 00000009 00394b4a 0026aba8 003215a4 00000003 00000000 0026d5a8 00000001 003215a4 003a4361 003238d6 000001f0 00000000 003215a4 10aa3b00 00025e84 003ddb00 10834000 002416a8 10aa3b00 00000000 00000080 000aa038 0004854a Call Trace: [<00023fa6>] __warn+0xb2/0xb4 [<00023fea>] warn_slowpath_fmt+0x42/0x64 [<001a70f8>] refcount_warn_saturate+0x44/0x9a [<00043aa8>] printk+0x0/0x18 [<001a70f8>] refcount_warn_saturate+0x44/0x9a [<0026aba8>] refcount_sub_and_test.constprop.73+0x38/0x3e [<0026d5a8>] ipv4_dst_destroy+0x5e/0x7e [<00025e84>] __local_bh_enable_ip+0x0/0x8e [<002416a8>] dst_destroy+0x40/0xae Fix this by forcing 4-byte alignment of all dst_metrics structures. Fixes: e5fd387ad5b30ca3 ("ipv6: do not overwrite inetpeer metrics prematurely") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20selftests: pmtu: fix init mtu value in descriptionHangbin Liu
There is no a_r3, a_r4 in the testing topology. It should be b_r1, b_r2. Also b_r1 mtu is 1400 and b_r2 mtu is 1500. Fixes: e44e428f59e4 ("selftests: pmtu: add basic IPv4 and IPv6 PMTU tests") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20hv_netvsc: Fix unwanted rx_table resetHaiyang Zhang
In existing code, the receive indirection table, rx_table, is in struct rndis_device, which will be reset when changing MTU, ringparam, etc. User configured receive indirection table values will be lost. To fix this, move rx_table to struct net_device_context, and check netif_is_rxfh_configured(), so rx_table will be set to default only if no user configured value. Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: phy: ensure that phy IDs are correctly typedRussell King
PHY IDs are 32-bit unsigned quantities. Ensure that they are always treated as such, and not passed around as "int"s. Fixes: 13d0ab6750b2 ("net: phy: check return code when requesting PHY driver module") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20mod_devicetable: fix PHY module formatRussell King
When a PHY is probed, if the top bit is set, we end up requesting a module with the string "mdio:-10101110000000100101000101010001" - the top bit is printed to a signed -1 value. This leads to the module not being loaded. Fix the module format string and the macro generating the values for it to ensure that we only print unsigned types and the top bit is always 0/1. We correctly end up with "mdio:10101110000000100101000101010001". Fixes: 8626d3b43280 ("phylib: Support phy module autoloading") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20qede: Disable hardware gro when xdp prog is installedManish Chopra
commit 18c602dee472 ("qede: Use NETIF_F_GRO_HW.") introduced a regression in driver that when xdp program is installed on qede device, device's aggregation feature (hardware GRO) is not getting disabled, which is unexpected with xdp. Fixes: 18c602dee472 ("qede: Use NETIF_F_GRO_HW.") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20Merge branch 'ena-fixes-of-interrupt-moderation-bugs'David S. Miller
Arthur Kiyanovski says: ==================== ena: fixes of interrupt moderation bugs Differences from V1: 1. Updated default tx interrupt moderation to 64us 2. Added "Fixes:" tags. 3. Removed cosmetic changes that are not relevant for these bug fixes This patchset includes a couple of fixes of bugs in the implemenation of interrupt moderation. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: ena: fix issues in setting interrupt moderation params in ethtoolArthur Kiyanovski
Issue 1: -------- Reproduction steps: 1. sudo ethtool -C eth0 rx-usecs 128 2. sudo ethtool -C eth0 adaptive-rx on 3. sudo ethtool -C eth0 adaptive-rx off 4. ethtool -c eth0 expected output: rx-usecs 128 actual output: rx-usecs 0 Reason for issue: In stage 3, ethtool userspace calls first the ena_get_coalesce() handler to get the current value of all properties, and then the ena_set_coalesce() handler. When ena_get_coalesce() is called the adaptive interrupt moderation is still on. There is an if in the code that returns the rx_coalesce_usecs only if the adaptive interrupt moderation is off. And since it is still on, rx_coalesce_usecs is not set, meaning it stays 0. Solution to issue: Remove this if static interrupt moderation intervals have nothing to do with dynamic ones. Issue 2: -------- Reproduction steps: 1. sudo ethtool -C eth0 adaptive-rx on 2. sudo ethtool -C eth0 rx-usecs 128 3. ethtool -c eth0 expected output: rx-usecs 128 actual output: rx-usecs 0 Reason for issue: In stage 2, when ena_set_coalesce() is called, the handler tests if rx adaptive interrupt moderation is on, and if it is, it returns before getting to the part in the function that sets the rx non-adaptive interrupt moderation interval. Solution to issue: Remove the return from the function when rx adaptive interrupt moderation is on. Also cleaned up the fixed code in ena_set_coalesce by grouping together adaptive interrupt moderation toggling, and using && instead of nested ifs. Fixes: b3db86dc4b82 ("net: ena: reimplement set/get_coalesce()") Fixes: 0eda847953d8 ("net: ena: fix retrieval of nonadaptive interrupt moderation intervals") Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: ena: fix default tx interrupt moderation intervalArthur Kiyanovski
Current default non-adaptive tx interrupt moderation interval is 196 us. This value is too high and might cause the tx queue to fill up. In this commit we set the default non-adaptive tx interrupt moderation interval to 64 us in order to: 1. Reduce the probability of the queue filling-up (when compared to the current default value of 196 us). 2. Reduce unnecessary tx interrupt overhead (which happens if we set the default tx interval to 0). We determined experimentally that 64 us is an optimal value that reduces interrupt rate by more than 20% without affecting performance. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net/smc: unregister ib devices in reboot_eventKarsten Graul
In the reboot_event handler, unregister the ib devices and enable the IB layer to release the devices before the reboot. Fixes: a33a803cfe64 ("net/smc: guarantee removal of link groups in reboot") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: stmmac: platform: Fix MDIO init for platforms without PHYPadmanabhan Rajanbabu
The current implementation of "stmmac_dt_phy" function initializes the MDIO platform bus data, even in the absence of PHY. This fix will skip MDIO initialization if there is no PHY present. Fixes: 7437127 ("net: stmmac: Convert to phylink and remove phylib logic") Acked-by: Jayati Sahu <jayati.sahu@samsung.com> Signed-off-by: Sriram Dash <sriram.dash@samsung.com> Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)Chan Shu Tak, Alex
When a frame with NULL DSAP is received, llc_station_rcv is called. In turn, llc_stat_ev_rx_null_dsap_xid_c is called to check if it is a NULL XID frame. The return statement of llc_stat_ev_rx_null_dsap_xid_c returns 1 when the incoming frame is not a NULL XID frame and 0 otherwise. Hence, a NULL XID response is returned unexpectedly, e.g. when the incoming frame is a NULL TEST command. To fix the error, simply remove the conditional operator. A similar error in llc_stat_ev_rx_null_dsap_test_c is also fixed. Signed-off-by: Chan Shu Tak, Alex <alexchan@task.com.hk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: hisilicon: Fix a BUG trigered by wrong bytes_complJiangfeng Xiao
When doing stress test, we get the following trace: kernel BUG at lib/dynamic_queue_limits.c:26! Internal error: Oops - BUG: 0 [#1] SMP ARM Modules linked in: hip04_eth CPU: 0 PID: 2003 Comm: tDblStackPcap0 Tainted: G O L 4.4.197 #1 Hardware name: Hisilicon A15 task: c3637668 task.stack: de3bc000 PC is at dql_completed+0x18/0x154 LR is at hip04_tx_reclaim+0x110/0x174 [hip04_eth] pc : [<c041abfc>] lr : [<bf0003a8>] psr: 800f0313 sp : de3bdc2c ip : 00000000 fp : c020fb10 r10: 00000000 r9 : c39b4224 r8 : 00000001 r7 : 00000046 r6 : c39b4000 r5 : 0078f392 r4 : 0078f392 r3 : 00000047 r2 : 00000000 r1 : 00000046 r0 : df5d5c80 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 32c5387d Table: 1e189b80 DAC: 55555555 Process tDblStackPcap0 (pid: 2003, stack limit = 0xde3bc190) Stack: (0xde3bdc2c to 0xde3be000) [<c041abfc>] (dql_completed) from [<bf0003a8>] (hip04_tx_reclaim+0x110/0x174 [hip04_eth]) [<bf0003a8>] (hip04_tx_reclaim [hip04_eth]) from [<bf0012c0>] (hip04_rx_poll+0x20/0x388 [hip04_eth]) [<bf0012c0>] (hip04_rx_poll [hip04_eth]) from [<c04c8d9c>] (net_rx_action+0x120/0x374) [<c04c8d9c>] (net_rx_action) from [<c021eaf4>] (__do_softirq+0x218/0x318) [<c021eaf4>] (__do_softirq) from [<c021eea0>] (irq_exit+0x88/0xac) [<c021eea0>] (irq_exit) from [<c0240130>] (msa_irq_exit+0x11c/0x1d4) [<c0240130>] (msa_irq_exit) from [<c0267ba8>] (__handle_domain_irq+0x110/0x148) [<c0267ba8>] (__handle_domain_irq) from [<c0201588>] (gic_handle_irq+0xd4/0x118) [<c0201588>] (gic_handle_irq) from [<c0558360>] (__irq_svc+0x40/0x58) Exception stack(0xde3bdde0 to 0xde3bde28) dde0: 00000000 00008001 c3637668 00000000 00000000 a00f0213 dd3627a0 c0af6380 de00: c086d380 a00f0213 c0a22a50 de3bde6c 00000002 de3bde30 c0558138 c055813c de20: 600f0213 ffffffff [<c0558360>] (__irq_svc) from [<c055813c>] (_raw_spin_unlock_irqrestore+0x44/0x54) Kernel panic - not syncing: Fatal exception in interrupt Pre-modification code: int hip04_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev) { [...] [1] priv->tx_head = TX_NEXT(tx_head); [2] count++; [3] netdev_sent_queue(ndev, skb->len); [...] } An rx interrupt occurs if hip04_mac_start_xmit just executes to the line 2, tx_head has been updated, but corresponding 'skb->len' has not been added to dql_queue. And then hip04_mac_interrupt->__napi_schedule->hip04_rx_poll->hip04_tx_reclaim In hip04_tx_reclaim, because tx_head has been updated, bytes_compl will plus an additional "skb-> len" which has not been added to dql_queue. And then trigger the BUG_ON(bytes_compl > num_queued - dql->num_completed). To solve the problem described above, we put "netdev_sent_queue(ndev, skb->len);" before "priv->tx_head = TX_NEXT(tx_head);" Fixes: a41ea46a9a12 ("net: hisilicon: new hip04 ethernet driver") Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: dsa: ksz: use common define for tag lenMichael Grzeschik
Remove special taglen define KSZ8795_INGRESS_TAG_LEN and use generic KSZ_INGRESS_TAG_LEN instead. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20Merge branch 's390-fixes'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: fixes 2019-12-18 please apply the following patch series to your net tree. This brings two fixes for initialization / teardown issues, and one ENOTSUPP cleanup. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20s390/qeth: don't return -ENOTSUPP to userspaceJulian Wiedmann
ENOTSUPP is not uapi, use EOPNOTSUPP instead. Fixes: d66cb37e9664 ("qeth: Add new priority queueing options") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20s390/qeth: fix promiscuous mode after resetJulian Wiedmann
When managing the promiscuous mode during an RX modeset, qeth caches the current HW state to avoid repeated programming of the same state on each modeset. But while tearing down a device, we forget to clear the cached state. So when the device is later set online again, the initial RX modeset doesn't program the promiscuous mode since we believe it is already enabled. Fix this by clearing the cached state in the tear-down path. Note that for the SBP variant of promiscuous mode, this accidentally works right now because we unconditionally restore the SBP role while re-initializing. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20s390/qeth: handle error due to unsupported transport modeJulian Wiedmann
Along with z/VM NICs, there's additional device types that only support a specific transport mode (eg. external-bridged IQD). Identify the corresponding error code, and raise a fitting error message so that the user knows to adjust their device configuration. On top of that also fix the subsequent error path, so that the rejected cmd doesn't need to wait for a timeout but gets cancelled straight away. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20sbitmap: only queue kyber's wait callback if not already activeDavid Jeffery
Under heavy loads where the kyber I/O scheduler hits the token limits for its scheduling domains, kyber can become stuck. When active requests complete, kyber may not be woken up leaving the I/O requests in kyber stuck. This stuck state is due to a race condition with kyber and the sbitmap functions it uses to run a callback when enough requests have completed. The running of a sbt_wait callback can race with the attempt to insert the sbt_wait. Since sbitmap_del_wait_queue removes the sbt_wait from the list first then sets the sbq field to NULL, kyber can see the item as not on a list but the call to sbitmap_add_wait_queue will see sbq as non-NULL. This results in the sbt_wait being inserted onto the wait list but ws_active doesn't get incremented. So the sbitmap queue does not know there is a waiter on a wait list. Since sbitmap doesn't think there is a waiter, kyber may never be informed that there are domain tokens available and the I/O never advances. With the sbt_wait on a wait list, kyber believes it has an active waiter so cannot insert a new waiter when reaching the domain's full state. This race can be fixed by only adding the sbt_wait to the queue if the sbq field is NULL. If sbq is not NULL, there is already an action active which will trigger the re-running of kyber. Let it run and add the sbt_wait to the wait list if still needing to wait. Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Jeffery <djeffery@redhat.com> Reported-by: John Pittman <jpittman@redhat.com> Tested-by: John Pittman <jpittman@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-20cxgb4: fix refcount init for TC-MQPRIO offloadRahul Lakkireddy
Properly initialize refcount to 1 when hardware queue arrays for TC-MQPRIO offload have been freshly allocated. Otherwise, following warning is observed. Also fix up error path to only free hardware queue arrays when refcount reaches 0. [ 130.075342] ------------[ cut here ]------------ [ 130.075343] refcount_t: addition on 0; use-after-free. [ 130.075355] WARNING: CPU: 0 PID: 10870 at lib/refcount.c:25 refcount_warn_saturate+0xe1/0x100 [ 130.075356] Modules linked in: sch_mqprio iptable_nat ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_ucm ib_umad iw_cxgb4 libcxgb ib_uverbs x86_pkg_temp_thermal cxgb4 igb [ 130.075361] CPU: 0 PID: 10870 Comm: tc Kdump: loaded Not tainted 5.5.0-rc1+ #11 [ 130.075362] Hardware name: Supermicro X9SRE/X9SRE-3F/X9SRi/X9SRi-3F/X9SRE/X9SRE-3F/X9SRi/X9SRi-3F, BIOS 3.2 01/16/2015 [ 130.075363] RIP: 0010:refcount_warn_saturate+0xe1/0x100 [ 130.075364] Code: e8 14 41 c1 ff 0f 0b c3 80 3d 44 f4 10 01 00 0f 85 63 ff ff ff 48 c7 c7 38 9f 83 8c 31 c0 c6 05 2e f4 10 01 01 e8 ef 40 c1 ff <0f> 0b c3 48 c7 c7 10 9f 83 8c 31 c0 c6 05 17 f4 10 01 01 e8 d7 40 [ 130.075365] RSP: 0018:ffffa48d00c0b768 EFLAGS: 00010286 [ 130.075366] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000001 [ 130.075366] RDX: 0000000000000001 RSI: 0000000000000096 RDI: ffff8a2e9fa187d0 [ 130.075367] RBP: ffff8a2e93890000 R08: 0000000000000398 R09: 000000000000003c [ 130.075367] R10: 00000000000142a0 R11: 0000000000000397 R12: ffffa48d00c0b848 [ 130.075368] R13: ffff8a2e94746498 R14: ffff8a2e966f7000 R15: 0000000000000031 [ 130.075368] FS: 00007f689015f840(0000) GS:ffff8a2e9fa00000(0000) knlGS:0000000000000000 [ 130.075369] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 130.075369] CR2: 00000000006762a0 CR3: 00000007cf164005 CR4: 00000000001606f0 [ 130.075370] Call Trace: [ 130.075377] cxgb4_setup_tc_mqprio+0xbee/0xc30 [cxgb4] [ 130.075382] ? cxgb4_ethofld_restart+0x50/0x50 [cxgb4] [ 130.075384] ? pfifo_fast_init+0x7e/0xf0 [ 130.075386] mqprio_init+0x5f4/0x630 [sch_mqprio] [ 130.075389] qdisc_create+0x1bf/0x4a0 [ 130.075390] tc_modify_qdisc+0x1ff/0x770 [ 130.075392] rtnetlink_rcv_msg+0x28b/0x350 [ 130.075394] ? rtnl_calcit.isra.32+0x110/0x110 [ 130.075395] netlink_rcv_skb+0xc6/0x100 [ 130.075396] netlink_unicast+0x1db/0x330 [ 130.075397] netlink_sendmsg+0x2f5/0x460 [ 130.075399] ? _copy_from_user+0x2e/0x60 [ 130.075400] sock_sendmsg+0x59/0x70 [ 130.075401] ____sys_sendmsg+0x1f0/0x230 [ 130.075402] ? copy_msghdr_from_user+0xd7/0x140 [ 130.075403] ___sys_sendmsg+0x77/0xb0 [ 130.075404] ? ___sys_recvmsg+0x84/0xb0 [ 130.075406] ? __handle_mm_fault+0x377/0xaf0 [ 130.075407] __sys_sendmsg+0x53/0xa0 [ 130.075409] do_syscall_64+0x44/0x130 [ 130.075412] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 130.075413] RIP: 0033:0x7f688f13af10 [ 130.075414] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24 [ 130.075414] RSP: 002b:00007ffe6c7d9988 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 130.075415] RAX: ffffffffffffffda RBX: 00000000006703a0 RCX: 00007f688f13af10 [ 130.075415] RDX: 0000000000000000 RSI: 00007ffe6c7d99f0 RDI: 0000000000000003 [ 130.075416] RBP: 000000005df38312 R08: 0000000000000002 R09: 0000000000008000 [ 130.075416] R10: 00007ffe6c7d93e0 R11: 0000000000000246 R12: 0000000000000000 [ 130.075417] R13: 00007ffe6c7e9c50 R14: 0000000000000001 R15: 000000000067c600 [ 130.075418] ---[ end trace 8fbb3bf36a8671db ]--- v2: - Move the refcount_set() closer to where the hardware queue arrays are being allocated. - Fix up error path to only free hardware queue arrays when refcount reaches 0. Fixes: 2d0cb84dd973 ("cxgb4: add ETHOFLD hardware queue support") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20Merge tag 'devicetree-fixes-for-5.5-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree fix from Rob Herring: "Add missing 'properties' keyword enclosing 'snps,tso' in snps,dwmac binding" * tag 'devicetree-fixes-for-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Add missing 'properties' keyword enclosing 'snps,tso'
2019-12-20Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Leftover put_cpu() in the perf/smmuv3 error path. - Add Hisilicon TSV110 to spectre-v2 safe list * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: cpu_errata: Add Hisilicon TSV110 to spectre-v2 safe list perf/smmuv3: Remove the leftover put_cpu() in error path
2019-12-20Merge tag 'drm-fixes-2019-12-21' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Probably the last one before Christmas, I'll see if there is much demand over next few weeks for more fixes, I expect it'll be quiet enough. This has one exynos fix, and a bunch of i915 core and i915 GVT fixes. Summary: exynos: - component delete fix i915: - Fix to drop an unused and harmful display W/A - Fix to define EHL power wells independent of ICL - Fix for priority inversion on bonded requests - Fix in mmio offset calculation of DSB instance - Fix memory leak from get_task_pid when banning clients - Fixes to avoid dereference of uninitialized ops in dma_fence tracing and keep reference to execbuf object until submitted. - vGPU state setting locking fix (Zhenyu) - Fix vGPU display dmabuf as read-only (Zhenyu) - Properly handle vGPU display dmabuf page pin when rendering (Tina) - Fix one guest boot warning to handle guc reset state (Fred)" * tag 'drm-fixes-2019-12-21' of git://anongit.freedesktop.org/drm/drm: drm/exynos: gsc: add missed component_del drm/i915: Fix pid leak with banned clients drm/i915/gem: Keep request alive while attaching fences drm/i915: Fix WARN_ON condition for cursor plane ddb allocation drm/i915/gvt: Fix guest boot warning drm/i915/tgl: Drop Wa#1178 drm/i915/ehl: Define EHL powerwells independently of ICL drm/i915: Set fence_work.ops before dma_fence_init drm/i915: Copy across scheduler behaviour flags across submit fences drm/i915/dsb: Fix in mmio offset calculation of DSB instance drm/i915/gvt: Pin vgpu dma address before using drm/i915/gvt: set guest display buffer as readonly drm/i915/gvt: use vgpu lock for active state setting
2019-12-20Merge tag 'io_uring-5.5-20191220' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "Here's a set of fixes that should go into 5.5-rc3 for io_uring. This is bigger than I'd like it to be, mainly because we're fixing the case where an application reuses sqe data right after issue. This really must work, or it's confusing. With 5.5 we're flagging us as submit stable for the actual data, this must also be the case for SQEs. Honestly, I'd really like to add another series on top of this, since it cleans it up considerable and prevents any SQE reuse by design. I posted that here: https://lore.kernel.org/io-uring/20191220174742.7449-1-axboe@kernel.dk/T/#u and may still send it your way early next week once it's been looked at and had some more soak time (does pass all regression tests). With that series, we've unified the prep+issue handling, and only the prep phase even has access to the SQE. Anyway, outside of that, fixes in here for a few other issues that have been hit in testing or production" * tag 'io_uring-5.5-20191220' of git://git.kernel.dk/linux-block: io_uring: io_wq_submit_work() should not touch req->rw io_uring: don't wait when under-submitting io_uring: warn about unhandled opcode io_uring: read opcode and user_data from SQE exactly once io_uring: make IORING_OP_TIMEOUT_REMOVE deferrable io_uring: make IORING_OP_CANCEL_ASYNC deferrable io_uring: make IORING_POLL_ADD and IORING_POLL_REMOVE deferrable io_uring: make HARDLINK imply LINK io_uring: any deferred command must have stable sqe data io_uring: remove 'sqe' parameter to the OP helpers that take it io_uring: fix pre-prepped issue with force_nonblock == true io-wq: re-add io_wq_current_is_worker() io_uring: fix sporadic -EFAULT from IORING_OP_RECVMSG io_uring: fix stale comment and a few typos
2019-12-21Merge tag 'drm-intel-fixes-2019-12-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix to drop an unused and harmful display W/A - Fix to define EHL power wells independent of ICL - Fix for priority inversion on bonded requests - Fix in mmio offset calculation of DSB instance - Fix memory leak from get_task_pid when banning clients - Fixes to avoid dereference of uninitialized ops in dma_fence tracing and keep reference to execbuf object until submitted. - Includes gvt-fixes-2019-12-18 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191219124635.GA16068@jlahtine-desk.ger.corp.intel.com
2019-12-21Merge tag 'exynos-drm-fixes-for-v5.5-rc3' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Just one bug fixup . Make sure to unregister a component for Exynos gscaler driver when the driver is removed. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1576714013-3788-1-git-send-email-inki.dae@samsung.com
2019-12-20parisc: Fix compiler warnings in debug_core.cHelge Deller
Fix this compiler warning: kernel/debug/debug_core.c: In function ‘kgdb_cpu_enter’: arch/parisc/include/asm/cmpxchg.h:48:3: warning: value computed is not used [-Wunused-value] 48 | ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) arch/parisc/include/asm/atomic.h:78:30: note: in expansion of macro ‘xchg’ 78 | #define atomic_xchg(v, new) (xchg(&((v)->counter), new)) | ^~~~ kernel/debug/debug_core.c:596:4: note: in expansion of macro ‘atomic_xchg’ 596 | atomic_xchg(&kgdb_active, cpu); | ^~~~~~~~~~~ Signed-off-by: Helge Deller <deller@gmx.de>
2019-12-20block: fix memleak when __blk_rq_map_user_iov() is failedYang Yingliang
When I doing fuzzy test, get the memleak report: BUG: memory leak unreferenced object 0xffff88837af80000 (size 4096): comm "memleak", pid 3557, jiffies 4294817681 (age 112.499s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 20 00 00 00 10 01 00 00 00 00 00 00 01 00 00 00 ............... backtrace: [<000000001c894df8>] bio_alloc_bioset+0x393/0x590 [<000000008b139a3c>] bio_copy_user_iov+0x300/0xcd0 [<00000000a998bd8c>] blk_rq_map_user_iov+0x2f1/0x5f0 [<000000005ceb7f05>] blk_rq_map_user+0xf2/0x160 [<000000006454da92>] sg_common_write.isra.21+0x1094/0x1870 [<00000000064bb208>] sg_write.part.25+0x5d9/0x950 [<000000004fc670f6>] sg_write+0x5f/0x8c [<00000000b0d05c7b>] __vfs_write+0x7c/0x100 [<000000008e177714>] vfs_write+0x1c3/0x500 [<0000000087d23f34>] ksys_write+0xf9/0x200 [<000000002c8dbc9d>] do_syscall_64+0x9f/0x4f0 [<00000000678d8e9a>] entry_SYSCALL_64_after_hwframe+0x49/0xbe If __blk_rq_map_user_iov() is failed in blk_rq_map_user_iov(), the bio(s) which is allocated before this failing will leak. The refcount of the bio(s) is init to 1 and increased to 2 by calling bio_get(), but __blk_rq_unmap_user() only decrease it to 1, so the bio cannot be freed. Fix it by calling blk_rq_unmap_user(). Reviewed-by: Bob Liu <bob.liu@oracle.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-20s390/dasd: fix typo in copyright statementStefan Haberland
coypright -> copyright Reported-by: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-20s390/dasd: fix memleak in path handling error caseStefan Haberland
If for whatever reason the dasd_eckd_check_characteristics() function exits after at least some paths have their configuration data allocated those data is never freed again. In the error case the device->private pointer is set to NULL and dasd_eckd_uncheck_device() will exit without freeing the path data because of this NULL pointer. Fix by calling dasd_eckd_clear_conf_data() for error cases. Also use dasd_eckd_clear_conf_data() in dasd_eckd_uncheck_device() to avoid code duplication. Reported-by: Qian Cai <cai@lca.pw> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-20s390/dasd/cio: Interpret ccw_device_get_mdc return value correctlyJan Höppner
The max data count (mdc) is an unsigned 16-bit integer value as per AR documentation and is received via ccw_device_get_mdc() for a specific path mask from the CIO layer. The function itself also always returns a positive mdc value or 0 in case mdc isn't supported or couldn't be determined. Though, the comment for this function describes a negative return value to indicate failures. As a result, the DASD device driver interprets the return value of ccw_device_get_mdc() incorrectly. The error case is essentially a dead code path. To fix this behaviour, check explicitly for a return value of 0 and change the comment for ccw_device_get_mdc() accordingly. This fix merely enables the error code path in the DASD functions get_fcx_max_data() and verify_fcx_max_data(). The actual functionality stays the same and is still correct. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-20block: Fix a lockdep complaint triggered by request queue flushingBart Van Assche
Avoid that running test nvme/012 from the blktests suite triggers the following false positive lockdep complaint: ============================================ WARNING: possible recursive locking detected 5.0.0-rc3-xfstests-00015-g1236f7d60242 #841 Not tainted -------------------------------------------- ksoftirqd/1/16 is trying to acquire lock: 000000000282032e (&(&fq->mq_flush_lock)->rlock){..-.}, at: flush_end_io+0x4e/0x1d0 but task is already holding lock: 00000000cbadcbc2 (&(&fq->mq_flush_lock)->rlock){..-.}, at: flush_end_io+0x4e/0x1d0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&fq->mq_flush_lock)->rlock); lock(&(&fq->mq_flush_lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by ksoftirqd/1/16: #0: 00000000cbadcbc2 (&(&fq->mq_flush_lock)->rlock){..-.}, at: flush_end_io+0x4e/0x1d0 stack backtrace: CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.0.0-rc3-xfstests-00015-g1236f7d60242 #841 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: dump_stack+0x67/0x90 __lock_acquire.cold.45+0x2b4/0x313 lock_acquire+0x98/0x160 _raw_spin_lock_irqsave+0x3b/0x80 flush_end_io+0x4e/0x1d0 blk_mq_complete_request+0x76/0x110 nvmet_req_complete+0x15/0x110 [nvmet] nvmet_bio_done+0x27/0x50 [nvmet] blk_update_request+0xd7/0x2d0 blk_mq_end_request+0x1a/0x100 blk_flush_complete_seq+0xe5/0x350 flush_end_io+0x12f/0x1d0 blk_done_softirq+0x9f/0xd0 __do_softirq+0xca/0x440 run_ksoftirqd+0x24/0x50 smpboot_thread_fn+0x113/0x1e0 kthread+0x121/0x140 ret_from_fork+0x3a/0x50 Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-20block: Fix the type of 'sts' in bsg_queue_rq()Bart Van Assche
This patch fixes the following sparse warnings: block/bsg-lib.c:269:19: warning: incorrect type in initializer (different base types) block/bsg-lib.c:269:19: expected int sts block/bsg-lib.c:269:19: got restricted blk_status_t [usertype] block/bsg-lib.c:286:16: warning: incorrect type in return expression (different base types) block/bsg-lib.c:286:16: expected restricted blk_status_t block/bsg-lib.c:286:16: got int [assigned] sts Cc: Martin Wilck <mwilck@suse.com> Fixes: d46fe2cb2dce ("block: drop device references in bsg_queue_rq()") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-20parisc: soft_offline_page() now takes the pfnHelge Deller
Switch page deallocation table (pdt) driver to use pfn instead of a page pointer in soft_offline_page(). Fixes: feec24a6139d ("mm, soft-offline: convert parameter to pfn") Signed-off-by: Helge Deller <deller@gmx.de>
2019-12-20Merge tag 'iommu-fixes-v5.5-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Fix kmemleak warning in IOVA code - Fix compile warnings on ARM32/64 in dma-iommu code due to dma_mask type mismatches - Make ISA reserved regions relaxable, so that VFIO can assign devices which have such regions defined - Fix mapping errors resulting in IO page-faults in the VT-d driver - Make sure direct mappings for a domain are created after the default domain is updated - Map ISA reserved regions in the VT-d driver with correct permissions - Remove unneeded check for PSI capability in the IOTLB flush code of the VT-d driver - Lockdep fix iommu_dma_prepare_msi() * tag 'iommu-fixes-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/dma: Relax locking in iommu_dma_prepare_msi() iommu/vt-d: Remove incorrect PSI capability check iommu/vt-d: Allocate reserved region for ISA with correct permission iommu: set group default domain before creating direct mappings iommu/vt-d: Fix dmar pte read access not set error iommu/vt-d: Set ISA bridge reserved region as relaxable iommu/dma: Rationalise types for DMA masks iommu/iova: Init the struct iova to fix the possible memleak
2019-12-20Merge tag 'platform-drivers-x86-v5.5-2' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Andy Shevchenko: "Bucket of fixes for PDx86. Note, that there is no ABI breakage in Mellanox driver because it has been introduced in v5.5-rc1, so we can change it. Summary: - Add support of APUv4 and fix an assignment of simswap GPIO - Add Siemens CONNECT X300 to DMI table to avoid stuck during boot - Correct arguments of WMI call on HP Envy x360 15-cp0xxx model - Fix the mlx-bootctl sysfs attributes to be device related" * tag 'platform-drivers-x86-v5.5-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: pcengines-apuv2: Spelling fixes in the driver platform/x86: pcengines-apuv2: detect apuv4 board platform/x86: pcengines-apuv2: fix simswap GPIO assignment platform/x86: pmc_atom: Add Siemens CONNECT X300 to critclk_systems DMI table platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytes platform/mellanox: fix the mlx-bootctl sysfs
2019-12-20Merge tag 'mmc-v5.5-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fixes from Ulf Hansson: - mtk-sd: Fix tuning for MT8173 HS200/HS400 mode - sdhci: Revert a fix for incorrect switch to HS mode - sdhci-msm: Fixup accesses to the DDR_CONFIG register - sdhci-of-esdhc: Revert a bad fix for erratum A-009204 - sdhci-of-esdhc: Re-implement fix for erratum A-009204 - sdhci-of-esdhc: Fixup P2020 errata handling - sdhci-pci: Disable broken CMDQ on Intel GLK based Lenovo systems * tag 'mmc-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-of-esdhc: re-implement erratum A-009204 workaround mmc: sdhci: Add a quirk for broken command queuing mmc: sdhci: Workaround broken command queuing on Intel GLK mmc: sdhci-of-esdhc: fix P2020 errata handling mmc: sdhci: Update the tuning failed messages to pr_debug level mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add erratum A-009204 support" mmc: mediatek: fix CMD_TA to 2 for MT8173 HS200/HS400 mode mmc: sdhci-msm: Correct the offset and value for DDR_CONFIG register Revert "mmc: sdhci: Fix incorrect switch to HS mode"
2019-12-20Merge tag 'char-misc-5.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and other driver fixes for 5.5-rc3. The most noticable one is a much-reported fix for a random driver issue that came up from 5.5-rc1 compat_ioctl cleanups. The others are a chunk of habanalab driver fixes and intel_th driver fixes and new device ids. All have been in linux-next with no reported issues" * tag 'char-misc-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: random: don't forget compat_ioctl on urandom intel_th: msu: Fix window switching without windows intel_th: Fix freeing IRQs intel_th: pci: Add Elkhart Lake SOC support intel_th: pci: Add Comet Lake PCH-V support habanalabs: remove variable 'val' set but not used habanalabs: rate limit error msg on waiting for CS
2019-12-20Merge tag 'staging-5.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for a number of reported issues. The majority here are some fixes for the wfx driver, but also in here is a comedi driver fix found during some code review, and an axis-fifo build dependancy issue to resolve some reported testing problems. All of these have been in linux-next with no reported issues" * tag 'staging-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: wfx: fix wrong error message staging: wfx: fix hif_set_mfp() with big endian hosts staging: wfx: detect race condition in WEP authentication staging: wfx: ensure that retry policy always fallbacks to MCS0 / 1Mbps staging: wfx: fix rate control handling staging: wfx: firmware does not support more than 32 total retries staging: wfx: use boolean appropriately staging: wfx: fix counter overflow staging: wfx: fix case of lack of tx_retry_policies staging: wfx: fix the cache of rate policies on interface reset staging: axis-fifo: add unspecified HAS_IOMEM dependency staging: comedi: gsc_hpdi: check dma_alloc_coherent() return value
2019-12-20arm64: cpu_errata: Add Hisilicon TSV110 to spectre-v2 safe listWei Li
HiSilicon Taishan v110 CPUs didn't implement CSV2 field of the ID_AA64PFR0_EL1, but spectre-v2 is mitigated by hardware, so whitelist the MIDR in the safe list. Signed-off-by: Wei Li <liwei391@huawei.com> [hanjun: re-write the commit log] Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-12-20Merge tag 'tty-5.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 5.5-rc3. Only four small patches here: - atmel serial driver fix - msm_serial driver fix - sprd serial driver fix - tty core port fix The last tty core fix should resolve a long-standing bug with a race at port creation time that some people would see, and Sudip finally tracked down. All of these have been in linux-next with no reported issues" * tag 'tty-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty/serial: atmel: fix out of range clock divider handling tty: link tty and port before configuring it as console serial: sprd: Add clearing break interrupt operation tty: serial: msm_serial: Fix lockup for sysrq and oops
2019-12-20Merge tag 'usb-5.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for some reported issues. Included in here are: - xhci build warning fix - ehci disconnect warning fix - usbip lockup fix and error cleanup fix - typec build fix All of these have been in linux-next with no reported issues" * tag 'usb-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: xhci: Fix build warning seen with CONFIG_PM=n usbip: Fix error path of vhci_recv_ret_submit() usbip: Fix receive error in vhci-hcd when using scatter-gather USB: EHCI: Do not return -EPIPE when hub is disconnected usb: typec: fusb302: Fix an undefined reference to 'extcon_get_state'
2019-12-20Merge tag 'pinctrl-v5.5-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Sorry that this fixes pull request took a while. Too much christmas business going on. This contains a few really important Intel fixes and some odd fixes: - A host of fixes for the Intel baytrail and cherryview: properly serialize all register accesses and add the irqchip with the gpiochip as we need to, fix some pin lists and initialize the hardware in the right order. - Fix the Aspeed G6 LPC configuration. - Handle a possible NULL pointer exception in the core. - Fix the Kconfig dependencies for the Equilibrium driver" * tag 'pinctrl-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: ingenic: Fixup PIN_CONFIG_OUTPUT config pinctrl: Modify Kconfig to fix linker error pinctrl: pinmux: fix a possible null pointer in pinmux_can_be_used_for_gpio pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration pinctrl: cherryview: Pass irqchip when adding gpiochip pinctrl: cherryview: Add GPIO <-> pin mapping ranges via callback pinctrl: cherryview: Split out irq hw-init into a separate helper function pinctrl: baytrail: Pass irqchip when adding gpiochip pinctrl: baytrail: Add GPIO <-> pin mapping ranges via callback pinctrl: baytrail: Update North Community pin list pinctrl: baytrail: Really serialize all register accesses
2019-12-20platform/x86: pcengines-apuv2: Spelling fixes in the driverAndy Shevchenko
Mainly does: - capitalize gpio and bios to GPIO and BIOS - capitalize beginning of comments - add periods in multi-line comments Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-12-20platform/x86: pcengines-apuv2: detect apuv4 boardEnrico Weigelt, metux IT consult
GPIO stuff on APUv4 seems to be the same as on APUv2, so we just need to match on DMI data. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-12-20platform/x86: pcengines-apuv2: fix simswap GPIO assignmentEnrico Weigelt, metux IT consult
The mapping entry has to hold the GPIO line index instead of controller's register number. Fixes: 5037d4ddda31 ("platform/x86: pcengines-apuv2: wire up simswitch gpio as led") Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 19:18:56 +0000