summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-06-08mwifiex: update current config_band info in start_apAvinash Patil
It was observed that AP beacons would not reflect correct regulatory information upon starting AP in A band. This was because of missing AP config band update in set_channel of start_ap. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: change debug dump issue since skb maybe nullZhaoyang Liu
This patch fixes semantic warning for debugging data dump feature. Previous code is based on the assumption that skb is not null. New change makes sure that we already have data buffer. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08rtlwifi: rtl8192cu: Fix performance issue.Taehee Yoo
After physical reconnect, the rtl8192cu chipset shows low transmission rates.It cause is that variable "iqk_initialized" do not de-initialized. So I add this code. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: do not decrease tx_pending for AMSDU packet once moreXinming Hu
Negative adapter->tx_pending is observed while running data traffic, because tx_pending is decreased once more for AMSDU packet. since tx_pending have been decreased for all the source MSDU packets, we don't need to update once more for AMSDU packet. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: using right tid for addressing ra_listXinming Hu
This patch fixes issue with the accessing correct ra_list by downgrading corresponding tid number. Alternatively, ra lists are created in mwifiex_wmm_add_buf_txqueue using downgraded tid number. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: update AP WMM settings from BSS_START eventAvinash Patil
This was missing and would cause issue in WMM handling. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: advertise PS ON by default support to cfg80211Avinash Patil
This would enable driver to enter powersave as soon as connected. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: drop block-ack action framesAvinash Patil
We often see ADDBA request packets coming to driver because driver has registered for action frame subtype. We dont process BA action frames in host; drop such frames. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Xinmin Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: support downloading IEs from tailAvinash Patil
Earlier only RSN, WPA and channel switch IEs from tail buffer would be downloaded to FW. This patch adds support for downloading more IEs from tail buffer. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: parse power constraint IE from TailAvinash Patil
This patch adds support to parse power constraint IEs from Tail buffer. This power constraint is then set to FW during bss_config download. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: dump station support in uap modeXinming Hu
This patch extend cfg80211 dump_station handler, support for dump stations associated to mwifiex micro AP. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: add sta_list firmware commandXinming Hu
This patch add sta_list firmware command, which can be used to get power status and rssi for the stations associated to mwifiex micro AP. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: maintain station statistic in uap modeXinming Hu
This patch maintain statistic information for the stations associated to the mwifiex micro AP, include tx/rx bytes/packets, signal strength, tx bitrate. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: add cfg80211 get_channel handlerXinming Hu
This patch add cfg80211 get_channel handler for mwifiex. The handler will be used to report current channel to upper layer utility. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: disable CAC upon radar detection eventAvinash Patil
This patch adds support to disable ongoing CAC in FW upon detecting radar during CAC period. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: reset 11h active flag when chandef does not require dfsAvinash Patil
This patch fixes an issue where we were still setting 11h_active flag to true for channel defs where DFS is not required. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: enable 11d after bss resetAvinash Patil
BSS reset would reset all state information in FW. Issue 11d config command after reset to enabled 11d in FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: support AP reset after bss_stopAvinash Patil
This would enable clearing of FW bss data structures when AP operations are stopped. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: correct bss_type assignmentAvinash Patil
Correct bss_type assignment in add_virtual_interface. This would ensure correct operation in multiple station scenarios. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: verbose logging for association failure messagesAvinash Patil
This patch adds more detailed information about association failures - reason and states. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08ath9k: fix DMA stop sequence for AR9003+Felix Fietkau
AR93xx and newer needs to stop rx before tx to avoid getting the DMA engine or MAC into a stuck state. This should reduce/fix the occurence of "Failed to stop Tx DMA" logspam. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08wl1251: drop unneeded gotoJulia Lawall
Delete jump to a label on the next line, when that label is not used elsewhere. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier l; @@ -if (...) goto l; -l: // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-04tcp: double default TSQ output bytes limitWei Liu
Xen virtual network driver has higher latency than a physical NIC. Having only 128K as limit for TSQ introduced 30% regression in guest throughput. This patch raises the limit to 256K. This reduces the regression to 8%. This buys us more time to work out a proper solution in the long run. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04tcp: remove redundant checksEric Dumazet
tcp_v4_rcv() checks the following before calling tcp_v4_do_rcv(): if (th->doff < sizeof(struct tcphdr) / 4) goto bad_packet; if (!pskb_may_pull(skb, th->doff * 4)) goto discard_it; So following check in tcp_v4_do_rcv() is redundant and "goto csum_err;" is wrong anyway. if (skb->len < tcp_hdrlen(skb) || ...) goto csum_err; A second check can be removed after no_tcp_socket label for same reason. Same tests can be removed in tcp_v6_do_rcv() Note : short tcp frames are not properly accounted in tcpInErrs MIB, because pskb_may_pull() failure simply drops incoming skb, we might fix this in a separate patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03Merge branch 'switchdev-next'David S. Miller
Scott Feldman says: ==================== switchdev: documentation updates Update the switchdev documentation to clarify that for IPV4 FIB object, the add op is used for both adding and modifying the FIB entry on the device. I found a few other white-space and grammer issues to fix, and to clarify the static FDB ops. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03switchdev: documentation: use switchdev_port_obj_xxx for IPv4 FIB ↵Scott Feldman
add/modify/delete ops Clarify in documentation and code that IPV4 FIB add operation is used for both adding a new FIB entry to the device and for modifying an existing FIB entry on the device. Also, remove left-over references to ipv4_fib ops and replace with details on SWITCHDEV_PORT_IPV4_FIB object. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03switchdev: documentation: for static FDB ops, use switchdev_port_fdb_xxx opsScott Feldman
Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03switchdev: documentation: fix grammer errorScott Feldman
Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03switchdev: documentation: fix longer-than-80-char linesScott Feldman
Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03Merge tag 'wireless-drivers-next-for-davem-2015-06-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== new driver mt7601u for MediaTek Wi-Fi devices MT7601U ath10k: * qca6174 power consumption improvements, enable ASPM etc (Michal) wil6210: * support Wi-Fi Simple Configuration in STA mode iwlwifi: * a few fixes (re-enablement of interrupts for certain new platforms that have special power states) * Rework completely the RBD allocation model towards new multi RX hardware. * cleanups * scan reworks continuation (Luca) mwifiex: * improve firmware debug functionality rtlwifi: * update regulatory database brcmfmac: * cleanup and new feature support in PCIe code * alternative nvram loading for router support ==================== Conflicts: drivers/net/wireless/iwlwifi/Kconfig Trivial conflict in iwlwifi Kconfig, two commits adding the same two chip numbers to the help text, but order transposed. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03Merge branch 'cxgb4-next'David S. Miller
Hariprasad Shenai says: ==================== cxgb4: Adds support for various ethtool stats This patch series adds the following: Adds support to dump adapter specific stats in ethtool Adds support to dump channel stats in ethtool Adds support to dump loopback port stats in ethtool Remove wake-on-lan get/set ethtool support This patch series has been created against net-next tree and includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03cxgb4: Remove WOL get/set ethtool supportHariprasad Shenai
Remove ethtool get/set support for wake on lan, adapter doesn't support it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03cxgb4: Add support to dump loopback port statsHariprasad Shenai
Add support in ethtool to dump loopback port statistics Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03cxgb4: Add support in ethtool to dump channel statsHariprasad Shenai
Add support in ethtool to dump adapter channel stats Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03cxgb4: Add ethtool support to get adapter statsHariprasad Shenai
Add ethtool support to get adapter specific hardware statistics Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Antonio Quartulli says: ==================== pull request: batman-adv 20150603 here you have our second batch of patches intended for net-next. In this patchset you won't find any new features, but quite some code cleanup work, a bunch of code style fixes and also comments corrections by Markus Pargmann. Moreover you have a patch from Sven Eckelmann removing an unnecessary NULL check in batadv_iv_ogm_update_seqnos(). Please pull or let me know of any problem! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03net: tulip: rearrange order of searching for substringsRasmus Villemoes
Currently, two of the branches are dead code, since an earlier smaller substring would have been found ("TP" in the "TP_NW" case and either of "BNC" and "AUI" in the "BNC_AUI" case). Rearrange the strstr() calls so that the longer strings are searched for first. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-06-03 This series contains updates to e1000e only. Yanir provides 8 fixes and 1 version bump for e1000e. First fix resolves a possible unit hang if multiple descriptors are available in the rings during reset or runtime suspend. Fixed a warning on SPARC compile based on a suggested solution from Alex Duyck. Fixed a logical error, where a "if" condition under which a flush should occur, was revered. Fixed a hardware issue that prevented i219 from working in legacy interrupts mode. Fixed the hardware clock configuration and suprious non-linear increment. Lastly, fixed a system hang which occurred during execution of "ethtool -t <NIC>", by disabling MULR for the loopback test to avoid the hand state. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03bpf: introduce bpf_clone_redirect() helperAlexei Starovoitov
Allow eBPF programs attached to classifier/actions to call bpf_clone_redirect(skb, ifindex, flags) helper which will mirror or redirect the packet by dynamic ifindex selection from within the program to a target device either at ingress or at egress. Can be used for various scenarios, for example, to load balance skbs into veths, split parts of the traffic to local taps, etc. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03net/mlx4_core: fix typo in mlx4_set_vf_macCarol Soto
fix typo in mlx4_set_vf_mac Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03net/mlx4_core: need to call close fw if alloc icm is called twiceCarol Soto
If mlx4_enable_sriov is called by adapter without this feature MLX4_DEV_CAP_FLAG2_SYS_EQS then during this path the function alloc icm is called twice without freeing the structures from the first time. Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03net/mlx4_core: double free of dev_vfsCarol L Soto
If user loads mlx4_core with num_vfs greater than supported then variable dev->dev_vfs is freed 2 times after unloading the driver. Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03drivers/net/ethernet/dec/tulip/uli526x.c: fix misleading indentation in ↵David Malcolm
uli526x_timer This code in drivers/net/ethernet/dec/tulip/uli526x.c function "uli526x_timer": 1086 } else 1087 if ((tmp_cr12 & 0x3) && db->link_failed) { [...snip...] 1109 } 1110 else if(!(tmp_cr12 & 0x3) && db->link_failed) 1111 { [...snip...] 1117 } 1118 db->init=0; is misleadingly indented: the db->init=0 is indented as if part of the else clause at line 1086, but it is independent of it (no braces before the "if" at line 1087). This patch fixes the indentation to reflect the actual meaning of the code, though is it actually meant to be part of the "else" clause? (I'm a compiler developer, not a kernel person). It also adds spaces around the assignment, to placate checkpatch.pl. Seen via an experimental new gcc warning I'm working on for gcc 6, -Wmisleading-indentation, using gcc r223098 adding -Werror=misleading-indentation to KBUILD_CFLAGS in Makefile. The experimental GCC emits this warning (as an error), rightly IMHO: drivers/net/ethernet/dec/tulip/uli526x.c: In function ‘uli526x_timer’: drivers/net/ethernet/dec/tulip/uli526x.c:1118:3: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation] db->init=0; ^ drivers/net/ethernet/dec/tulip/uli526x.c:1086:4: note: ...this ‘else’ clause, but it is not } else ^ Hope this is helpful Dave Signed-off-by: David Malcolm <dmalcolm@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03net: phy: dp83867: Add TI dp83867 phyDan Murphy
Add support for the TI dp83867 Gigabit ethernet phy device. The DP83867 is a robust, low power, fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet protocols. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03ethernet: micrel: use time_after_eqAntonio Murdaca
use the time_after_eq macro for jiffies comparison operation Signed-off-by: Antonio Murdaca <antonio.murdaca@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03net/mlx4_core: Fix build failure introduced by the EQ pool changesOr Gerlitz
When CONFIG_RFS_ACCEL or SMP aren't set, we fail to build, fix it. Also, avoid build warning as of unused function on that setup. Fixes: c66fa19c405a ('net/mlx4: Add EQ pool') Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03batman-adv: Remove unnecessary ret variable in algo_registerMarkus Pargmann
Remove ret variable and all jumps. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03batman-adv: Remove unnecessary ret variableMarkus Pargmann
We can avoid this indirect return variable by directly returning the error values. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03batman-adv: main, batadv_compare_eth return boolMarkus Pargmann
Declare the returntype of batadv_compare_eth as bool. The function called inside this helper function (ether_addr_equal_unaligned) also uses bool as return value, so there is no need to return int. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03batman-adv: main, Convert is_my_mac() to boolMarkus Pargmann
It is much clearer to see a bool type as return value than 'int' for functions that are supposed to return true or false. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 14:19:43 +0000