summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-09scsi: qla2xxx: Get mutex lock before checking optrom_stateMilan P. Gandhi
There is a race condition with qla2xxx optrom functions where one thread might modify optrom buffer, optrom_state while other thread is still reading from it. In couple of crashes, it was found that we had successfully passed the following 'if' check where we confirm optrom_state to be QLA_SREADING. But by the time we acquired mutex lock to proceed with memory_read_from_buffer function, some other thread/process had already modified that option rom buffer and optrom_state from QLA_SREADING to QLA_SWAITING. Then we got ha->optrom_buffer 0x0 and crashed the system: if (ha->optrom_state != QLA_SREADING) return 0; mutex_lock(&ha->optrom_mutex); rval = memory_read_from_buffer(buf, count, &off, ha->optrom_buffer, ha->optrom_region_size); mutex_unlock(&ha->optrom_mutex); With current optrom function we get following crash due to a race condition: [ 1479.466679] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1479.466707] IP: [<ffffffff81326756>] memcpy+0x6/0x110 [...] [ 1479.473673] Call Trace: [ 1479.474296] [<ffffffff81225cbc>] ? memory_read_from_buffer+0x3c/0x60 [ 1479.474941] [<ffffffffa01574dc>] qla2x00_sysfs_read_optrom+0x9c/0xc0 [qla2xxx] [ 1479.475571] [<ffffffff8127e76b>] read+0xdb/0x1f0 [ 1479.476206] [<ffffffff811fdf9e>] vfs_read+0x9e/0x170 [ 1479.476839] [<ffffffff811feb6f>] SyS_read+0x7f/0xe0 [ 1479.477466] [<ffffffff816964c9>] system_call_fastpath+0x16/0x1b Below patch modifies qla2x00_sysfs_read_optrom, qla2x00_sysfs_write_optrom functions to get the mutex_lock before checking ha->optrom_state to avoid similar crashes. The patch was applied and tested and same crashes were no longer observed again. Tested-by: Milan P. Gandhi <mgandhi@redhat.com> Signed-off-by: Milan P. Gandhi <mgandhi@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-05scsi: bfa: Increase requested firmware version to 3.2.5.1Benjamin Poirier
bna & bfa firmware version 3.2.5.1 was submitted to linux-firmware on Feb 17 19:10:20 2015 -0500 in 0ab54ff1dc ("linux-firmware: Add QLogic BR Series Adapter Firmware"). bna was updated to use the newer firmware on Feb 19 16:02:32 2015 -0500 in 3f307c3d70 ("bna: Update the Driver and Firmware Version") bfa was not updated. I presume this was an oversight but it broke support for bfa+bna cards such as the following 04:00.0 Fibre Channel [0c04]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) 04:00.1 Fibre Channel [0c04]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) 04:00.2 Ethernet controller [0200]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) 04:00.3 Ethernet controller [0200]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) Currently, if the bfa module is loaded first, bna fails to probe the respective devices with [ 215.026787] bna: QLogic BR-series 10G Ethernet driver - version: 3.2.25.1 [ 215.043707] bna 0000:04:00.2: bar0 mapped to ffffc90001fc0000, len 262144 [ 215.060656] bna 0000:04:00.2: initialization failed err=1 [ 215.073893] bna 0000:04:00.3: bar0 mapped to ffffc90002040000, len 262144 [ 215.090644] bna 0000:04:00.3: initialization failed err=1 Whereas if bna is loaded first, bfa fails with [ 249.592109] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.0 [ 249.610738] bfa 0000:04:00.0: Running firmware version is incompatible with the driver version [ 249.833513] bfa 0000:04:00.0: bfa init failed [ 249.833919] scsi host6: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.0 driver: 3.2.25.0 [ 249.841446] bfa 0000:04:00.1: Running firmware version is incompatible with the driver version [ 250.045449] bfa 0000:04:00.1: bfa init failed [ 250.045962] scsi host7: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.1 driver: 3.2.25.0 Increase bfa's requested firmware version. Also increase the driver version. I only tested that all of the devices probe without error. Reported-by: Tim Ehlers <tehlers@gwdg.de> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Rasesh Mody <rasesh.mody@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-05scsi: snic: Return error code on memory allocation failureBurak Ok
If a call to mempool_create_slab_pool() in snic_probe() returns NULL, return -ENOMEM to indicate failure. mempool_creat_slab_pool() only fails if it cannot allocate memory. https://bugzilla.kernel.org/show_bug.cgi?id=189061 Reported-by: bianpan2010@ruc.edu.cn Signed-off-by: Burak Ok <burak-kernel@bur0k.de> Signed-off-by: Andreas Schaertl <andreas.schaertl@fau.de> Acked-by: Narsimhulu Musini <nmusini@cisco.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-05scsi: fnic: Avoid sending reset to firmware when another reset is in progressSatish Kharat
This fix is to avoid calling fnic_fw_reset_handler through fnic_host_reset when a finc reset is alreay in progress. Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-20scsi: qedi: fix build, depends on UIORandy Dunlap
Fix build of SCSI qedi driver. It uses uio interfaces so it should depend on UIO. ERROR: "uio_unregister_device" [drivers/scsi/qedi/qedi.ko] undefined! ERROR: "uio_event_notify" [drivers/scsi/qedi/qedi.ko] undefined! ERROR: "__uio_register_device" [drivers/scsi/qedi/qedi.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-20scsi: scsi-mq: Wait for .queue_rq() if necessaryBart Van Assche
Ensure that if scsi-mq is enabled that scsi_internal_device_block() waits until ongoing shost->hostt->queuecommand() calls have finished. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: James Bottomley <jejb@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Doug Ledford <dledford@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: avoid a permanent stop of the scsi device's request queueWei Fang
A race between scanning and fc_remote_port_delete() may result in a permanent stop if the device gets blocked before scsi_sysfs_add_sdev() and unblocked after. The reason is that blocking a device sets both the SDEV_BLOCKED state and the QUEUE_FLAG_STOPPED. However, scsi_sysfs_add_sdev() unconditionally sets SDEV_RUNNING which causes the device to be ignored by scsi_target_unblock() and thus never have its QUEUE_FLAG_STOPPED cleared leading to a device which is apparently running but has a stopped queue. We actually have two places where SDEV_RUNNING is set: once in scsi_add_lun() which respects the blocked flag and once in scsi_sysfs_add_sdev() which doesn't. Since the second set is entirely spurious, simply remove it to fix the problem. Cc: <stable@vger.kernel.org> Reported-by: Zengxi Chen <chenzengxi@huawei.com> Signed-off-by: Wei Fang <fangwei1@huawei.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: mpt3sas: Recognize and act on iopriority infoAdam Manzanares
This patch adds support for request iopriority handling in the mpt3sas layer. This works only when a ATA device is behind the SATL. The ATA device also has to indicate that it supports command priorities in the identify information that is pulled from the SATL. Signed-off-by: Adam Manzanares <adam.manzanares@wdc.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: qla2xxx: Fix Target mode handling with Multiqueue changes.Quinn Tran
- Fix race condition between dpc_thread accessing Multiqueue resources and qla2x00_remove_one thread trying to free resource. - Fix out of order free for Multiqueue resources. Also, Multiqueue interrupts needs a workqueue. Interrupt needed to stop before the wq can be destroyed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: qla2xxx: Add Block Multi Queue functionality.Michael Hernandez
Tell the SCSI layer how many hardware queues we have based on the number of max queue pairs created. The number of max queue pairs created will depend on number of MSI-X vector count. This feature can be turned on via CONFIG_SCSI_MQ_DEFAULT or passing scsi_mod.use_blk_mq=Y as a parameter to the kernel Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by: Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: qla2xxx: Add multiple queue pair functionality.Michael Hernandez
Replaced existing multiple queue functionality with framework that allows for the creation of pairs of request and response queues, either at start of day or dynamically. Queue pair creation depend on module parameter "ql2xmqsupport", which need to be enabled to create queue pair. Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by: Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: qla2xxx: Utilize pci_alloc_irq_vectors/pci_free_irq_vectors calls.Michael Hernandez
Replaces the old pci_enable_msi[x]* and pci_disable_msi[x] calls. Signed-off-by: Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: qla2xxx: Only allow operational MBX to proceed during RESET.himanshu.madhani@cavium.com
This patch is allowing only ROM mailbox command which are necessary to initialize chip after a reset has been issued. In a target environment, there could be a user space daemon which can issue statistics and other management mailbox command which are non-critical. This patch will timeout non critical mailbox commands immediately rather than waiting for timeout, if driver detects that chip reset has been issued or chip reset is in progress. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: hpsa: remove memory allocate failure messageAmit Kushwaha
This patch cleanup warning reported by checkpatch.pl WARNING: Possible unnecessary 'out of memory' message With no available memory, a warn on message already gets printed by page alloc apis and modified goto use if memory unallocated. Signed-off-by: Amit Kushwaha <kushwaha.a@samsung.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: Update 3ware driver email addressesadam radford
This change updates the 3ware drivers (3w-xxxx, 3w-9xxx, 3w-sas) email addresses from linuxraid@lsi.com to aradford@gmail.com, since the old email address doesn't exist. This patch was updated to remove www.lsi.com text. [mkp: applied by hand] Signed-off-by: Adam Radford <aradford@gmail.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: zfcp: fix rport unblock race with LUN recoverySteffen Maier
It is unavoidable that zfcp_scsi_queuecommand() has to finish requests with DID_IMM_RETRY (like fc_remote_port_chkready()) during the time window when zfcp detected an unavailable rport but fc_remote_port_delete(), which is asynchronous via zfcp_scsi_schedule_rport_block(), has not yet blocked the rport. However, for the case when the rport becomes available again, we should prevent unblocking the rport too early. In contrast to other FCP LLDDs, zfcp has to open each LUN with the FCP channel hardware before it can send I/O to a LUN. So if a port already has LUNs attached and we unblock the rport just after port recovery, recoveries of LUNs behind this port can still be pending which in turn force zfcp_scsi_queuecommand() to unnecessarily finish requests with DID_IMM_RETRY. This also opens a time window with unblocked rport (until the followup LUN reopen recovery has finished). If a scsi_cmnd timeout occurs during this time window fc_timed_out() cannot work as desired and such command would indeed time out and trigger scsi_eh. This prevents a clean and timely path failover. This should not happen if the path issue can be recovered on FC transport layer such as path issues involving RSCNs. Fix this by only calling zfcp_scsi_schedule_rport_register(), to asynchronously trigger fc_remote_port_add(), after all LUN recoveries as children of the rport have finished and no new recoveries of equal or higher order were triggered meanwhile. Finished intentionally includes any recovery result no matter if successful or failed (still unblock rport so other successful LUNs work). For simplicity, we check after each finished LUN recovery if there is another LUN recovery pending on the same port and then do nothing. We handle the special case of a successful recovery of a port without LUN children the same way without changing this case's semantics. For debugging we introduce 2 new trace records written if the rport unblock attempt was aborted due to still unfinished or freshly triggered recovery. The records are only written above the default trace level. Benjamin noticed the important special case of new recovery that can be triggered between having given up the erp_lock and before calling zfcp_erp_action_cleanup() within zfcp_erp_strategy(). We must avoid the following sequence: ERP thread rport_work other context ------------------------- -------------- -------------------------------- port is unblocked, rport still blocked, due to pending/running ERP action, so ((port->status & ...UNBLOCK) != 0) and (port->rport == NULL) unlock ERP zfcp_erp_action_cleanup() case ZFCP_ERP_ACTION_REOPEN_LUN: zfcp_erp_try_rport_unblock() ((status & ...UNBLOCK) != 0) [OLD!] zfcp_erp_port_reopen() lock ERP zfcp_erp_port_block() port->status clear ...UNBLOCK unlock ERP zfcp_scsi_schedule_rport_block() port->rport_task = RPORT_DEL queue_work(rport_work) zfcp_scsi_rport_work() (port->rport_task != RPORT_ADD) port->rport_task = RPORT_NONE zfcp_scsi_rport_block() if (!port->rport) return zfcp_scsi_schedule_rport_register() port->rport_task = RPORT_ADD queue_work(rport_work) zfcp_scsi_rport_work() (port->rport_task == RPORT_ADD) port->rport_task = RPORT_NONE zfcp_scsi_rport_register() (port->rport == NULL) rport = fc_remote_port_add() port->rport = rport; Now the rport was erroneously unblocked while the zfcp_port is blocked. This is another situation we want to avoid due to scsi_eh potential. This state would at least remain until the new recovery from the other context finished successfully, or potentially forever if it failed. In order to close this race, we take the erp_lock inside zfcp_erp_try_rport_unblock() when checking the status of zfcp_port or LUN. With that, the possible corresponding rport state sequences would be: (unblock[ERP thread],block[other context]) if the ERP thread gets erp_lock first and still sees ((port->status & ...UNBLOCK) != 0), (block[other context],NOP[ERP thread]) if the ERP thread gets erp_lock after the other context has already cleard ...UNBLOCK from port->status. Since checking fields of struct erp_action is unsafe because they could have been overwritten (re-used for new recovery) meanwhile, we only check status of zfcp_port and LUN since these are only changed under erp_lock elsewhere. Regarding the check of the proper status flags (port or port_forced are similar to the shown adapter recovery): [zfcp_erp_adapter_shutdown()] zfcp_erp_adapter_reopen() zfcp_erp_adapter_block() * clear UNBLOCK ---------------------------------------+ zfcp_scsi_schedule_rports_block() | write_lock_irqsave(&adapter->erp_lock, flags);-------+ | zfcp_erp_action_enqueue() | | zfcp_erp_setup_act() | | * set ERP_INUSE -----------------------------------|--|--+ write_unlock_irqrestore(&adapter->erp_lock, flags);--+ | | .context-switch. | | zfcp_erp_thread() | | zfcp_erp_strategy() | | write_lock_irqsave(&adapter->erp_lock, flags);------+ | | ... | | | zfcp_erp_strategy_check_target() | | | zfcp_erp_strategy_check_adapter() | | | zfcp_erp_adapter_unblock() | | | * set UNBLOCK -----------------------------------|--+ | zfcp_erp_action_dequeue() | | * clear ERP_INUSE ---------------------------------|-----+ ... | write_unlock_irqrestore(&adapter->erp_lock, flags);-+ Hence, we should check for both UNBLOCK and ERP_INUSE because they are interleaved. Also we need to explicitly check ERP_FAILED for the link down case which currently does not clear the UNBLOCK flag in zfcp_fsf_link_down_info_eval(). Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 8830271c4819 ("[SCSI] zfcp: Dont fail SCSI commands when transitioning to blocked fc_rport") Fixes: a2fa0aede07c ("[SCSI] zfcp: Block FC transport rports early on errors") Fixes: 5f852be9e11d ("[SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI") Fixes: 338151e06608 ("[SCSI] zfcp: make use of fc_remote_port_delete when target port is unavailable") Fixes: 3859f6a248cb ("[PATCH] zfcp: add rports to enable scsi_add_device to work again") Cc: <stable@vger.kernel.org> #2.6.32+ Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: zfcp: do not trace pure benign residual HBA responses at default levelSteffen Maier
Since quite a while, Linux issues enough SCSI commands per scsi_device which successfully return with FCP_RESID_UNDER, FSF_FCP_RSP_AVAILABLE, and SAM_STAT_GOOD. This floods the HBA trace area and we cannot see other and important HBA trace records long enough. Therefore, do not trace HBA response errors for pure benign residual under counts at the default trace level. This excludes benign residual under count combined with other validity bits set in FCP_RSP_IU, such as FCP_SNS_LEN_VAL. For all those other cases, we still do want to see both the HBA record and the corresponding SCSI record by default. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") Cc: <stable@vger.kernel.org> #2.6.37+ Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: zfcp: fix use-after-"free" in FC ingress path after TMFBenjamin Block
When SCSI EH invokes zFCP's callbacks for eh_device_reset_handler() and eh_target_reset_handler(), it expects us to relent the ownership over the given scsi_cmnd and all other scsi_cmnds within the same scope - LUN or target - when returning with SUCCESS from the callback ('release' them). SCSI EH can then reuse those commands. We did not follow this rule to release commands upon SUCCESS; and if later a reply arrived for one of those supposed to be released commands, we would still make use of the scsi_cmnd in our ingress tasklet. This will at least result in undefined behavior or a kernel panic because of a wrong kernel pointer dereference. To fix this, we NULLify all pointers to scsi_cmnds (struct zfcp_fsf_req *)->data in the matching scope if a TMF was successful. This is done under the locks (struct zfcp_adapter *)->abort_lock and (struct zfcp_reqlist *)->lock to prevent the requests from being removed from the request-hashtable, and the ingress tasklet from making use of the scsi_cmnd-pointer in zfcp_fsf_fcp_cmnd_handler(). For cases where a reply arrives during SCSI EH, but before we get a chance to NULLify the pointer - but before we return from the callback -, we assume that the code is protected from races via the CAS operation in blk_complete_request() that is called in scsi_done(). The following stacktrace shows an example for a crash resulting from the previous behavior: Unable to handle kernel pointer dereference at virtual kernel address fffffee17a672000 Oops: 0038 [#1] SMP CPU: 2 PID: 0 Comm: swapper/2 Not tainted task: 00000003f7ff5be0 ti: 00000003f3d38000 task.ti: 00000003f3d38000 Krnl PSW : 0404d00180000000 00000000001156b0 (smp_vcpu_scheduled+0x18/0x40) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 EA:3 Krnl GPRS: 000000200000007e 0000000000000000 fffffee17a671fd8 0000000300000015 ffffffff80000000 00000000005dfde8 07000003f7f80e00 000000004fa4e800 000000036ce8d8f8 000000036ce8d9c0 00000003ece8fe00 ffffffff969c9e93 00000003fffffffd 000000036ce8da10 00000000003bf134 00000003f3b07918 Krnl Code: 00000000001156a2: a7190000 lghi %r1,0 00000000001156a6: a7380015 lhi %r3,21 #00000000001156aa: e32050000008 ag %r2,0(%r5) >00000000001156b0: 482022b0 lh %r2,688(%r2) 00000000001156b4: ae123000 sigp %r1,%r2,0(%r3) 00000000001156b8: b2220020 ipm %r2 00000000001156bc: 8820001c srl %r2,28 00000000001156c0: c02700000001 xilf %r2,1 Call Trace: ([<0000000000000000>] 0x0) [<000003ff807bdb8e>] zfcp_fsf_fcp_cmnd_handler+0x3de/0x490 [zfcp] [<000003ff807be30a>] zfcp_fsf_req_complete+0x252/0x800 [zfcp] [<000003ff807c0a48>] zfcp_fsf_reqid_check+0xe8/0x190 [zfcp] [<000003ff807c194e>] zfcp_qdio_int_resp+0x66/0x188 [zfcp] [<000003ff80440c64>] qdio_kick_handler+0xdc/0x310 [qdio] [<000003ff804463d0>] __tiqdio_inbound_processing+0xf8/0xcd8 [qdio] [<0000000000141fd4>] tasklet_action+0x9c/0x170 [<0000000000141550>] __do_softirq+0xe8/0x258 [<000000000010ce0a>] do_softirq+0xba/0xc0 [<000000000014187c>] irq_exit+0xc4/0xe8 [<000000000046b526>] do_IRQ+0x146/0x1d8 [<00000000005d6a3c>] io_return+0x0/0x8 [<00000000005d6422>] vtime_stop_cpu+0x4a/0xa0 ([<0000000000000000>] 0x0) [<0000000000103d8a>] arch_cpu_idle+0xa2/0xb0 [<0000000000197f94>] cpu_startup_entry+0x13c/0x1f8 [<0000000000114782>] smp_start_secondary+0xda/0xe8 [<00000000005d6efe>] restart_int_handler+0x56/0x6c [<0000000000000000>] 0x0 Last Breaking-Event-Address: [<00000000003bf12e>] arch_spin_lock_wait+0x56/0xb0 Suggested-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.vnet.ibm.com> Fixes: ea127f9754 ("[PATCH] s390 (7/7): zfcp host adapter.") (tglx/history.git) Cc: <stable@vger.kernel.org> #2.6.32+ Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: libcxgbi: return error if interface is not upVarun Prakash
Do not post hw active open cmd if IFF_UP is not set or link is down on the interface, return -ENETDOWN in this case. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: cxgb4i: libcxgbi: add missing module_put()Varun Prakash
Add module_put() in cxgbi_sock_act_open_req_arp_failure() to release module reference in case of arp failure, also check return value of try_module_get() before posting active open hw cmd. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: cxgb4i: libcxgbi: cxgb4: add T6 iSCSI completion featureVarun Prakash
T6 adapters reduce number of completions to host by generating single completion for all the directly placed(DDP) iSCSI pdus in a sequence. This patch adds new structure for completion hw cmd (struct cpl_rx_iscsi_cmp) and implements T6 completion feature. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: cxgb4i: libcxgbi: add active open cmd for T6 adaptersVarun Prakash
Add T6 active open cmd to open active connections on T6 adapters. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: cxgb4i: use cxgb4_tp_smt_idx() to get smt_idxVarun Prakash
cxgb4_tp_smt_idx() is defined in cxgb4 driver, it returns smt_idx for T4,T5,T6 adapters. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.Manish Rangankar
The QLogic FastLinQ Driver for iSCSI (qedi) is the iSCSI specific module for 41000 Series Converged Network Adapters by QLogic. This patch consists of following changes: - MAINTAINERS Makefile and Kconfig changes for qedi, - PCI driver registration, - iSCSI host level initialization, - Debugfs and log level infrastructure. The following indiviual changes are merged into this commit: qedi: Add LL2 iSCSI interface for offload iSCSI. qedi: Add support for iSCSI session management. qedi: Add support for data path. Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@cavium.com> Signed-off-by: Arun Easi <arun.easi@cavium.com> Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14Merge tag 'dm-4.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - various fixes and improvements to request-based DM and DM multipath - some locking improvements in DM bufio - add Kconfig option to disable the DM block manager's extra locking which mainly serves as a developer tool - a few bug fixes to DM's persistent-data - a couple changes to prepare for multipage biovec support in the block layer - various improvements and cleanups in the DM core, DM cache, DM raid and DM crypt - add ability to have DM crypt use keys from the kernel key retention service - add a new "error_writes" feature to the DM flakey target, reads are left unchanged in this mode * tag 'dm-4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (40 commits) dm flakey: introduce "error_writes" feature dm cache policy smq: use hash_32() instead of hash_32_generic() dm crypt: reject key strings containing whitespace chars dm space map: always set ev if sm_ll_mutate() succeeds dm space map metadata: skip useless memcpy in metadata_ll_init_index() dm space map metadata: fix 'struct sm_metadata' leak on failed create Documentation: dm raid: define data_offset status field dm raid: fix discard support regression dm raid: don't allow "write behind" with raid4/5/6 dm mpath: use hw_handler_params if attached hw_handler is same as requested dm crypt: add ability to use keys from the kernel key retention service dm array: remove a dead assignment in populate_ablock_with_values() dm ioctl: use offsetof() instead of open-coding it dm rq: simplify use_blk_mq initialization dm: use blk_set_queue_dying() in __dm_destroy() dm bufio: drop the lock when doing GFP_NOIO allocation dm bufio: don't take the lock in dm_bufio_shrink_count dm bufio: avoid sleeping while holding the dm_bufio lock dm table: simplify dm_table_determine_type() dm table: an 'all_blk_mq' table must be loaded for a blk-mq DM device ...
2016-12-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shli/md Pull MD updates from Shaohua Li: - a raid5 writeback cache feature. The goal is to aggregate writes to make full stripe write and reduce read-modify-write. It's helpful for workload which does sequential write and follows fsync for example. This feature is experimental and off by default right now. - FAILFAST support. This fails IOs to broken raid disks quickly, so can improve latency. It's mainly for DASD storage, but some patches help normal raid array too. - support bad block for raid array with external metadata - AVX2 instruction support for raid6 parity calculation - normalize MD info output - add missing blktrace - other bug fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (66 commits) md: separate flags for superblock changes md: MD_RECOVERY_NEEDED is set for mddev->recovery md: takeover should clear unrelated bits md/r5cache: after recovery, increase journal seq by 10000 md/raid5-cache: fix crc in rewrite_data_only_stripes() md/raid5-cache: no recovery is required when create super-block md: fix refcount problem on mddev when stopping array. md/r5cache: do r5c_update_log_state after log recovery md/raid5-cache: adjust the write position of the empty block if no data blocks md/r5cache: run_no_space_stripes() when R5C_LOG_CRITICAL == 0 md/raid5: limit request size according to implementation limits md/raid5-cache: do not need to set STRIPE_PREREAD_ACTIVE repeatedly md/raid5-cache: remove the unnecessary next_cp_seq field from the r5l_log md/raid5-cache: release the stripe_head at the appropriate location md/raid5-cache: use ring add to prevent overflow md/raid5-cache: remove unnecessary function parameters raid5-cache: don't set STRIPE_R5C_PARTIAL_STRIPE flag while load stripe into cache raid5-cache: add another check conditon before replaying one stripe md/r5cache: enable IRQs on error path md/r5cache: handle alloc_page failure ...
2016-12-14Merge tag 'mmc-v4.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull another MMC update from Ulf Hansson: "Here's a second pull request for MMC for v4.10. As a matter of fact it's only one change that moves some mmc files around. I thought it was a good idea to get this into v4.10, as it gives us a nice and fresh base for v4.11. Summary: MMC core: - Move files from the card directory to the core directory to enable future clean-ups of the generic mmc header files and interfaces" * tag 'mmc-v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: block: Move files to core
2016-12-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (ncr5380, lpfc, hisi_sas, megaraid_sas, ufs, ibmvscsis, mpt3sas). There's also an assortment of minor fixes, mostly in error legs or other not very user visible stuff. The major change is the pci_alloc_irq_vectors replacement for the old pci_msix_.. calls; this effectively makes IRQ mapping generic for the drivers and allows blk_mq to use the information" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (256 commits) scsi: qla4xxx: switch to pci_alloc_irq_vectors scsi: hisi_sas: support deferred probe for v2 hw scsi: megaraid_sas: switch to pci_alloc_irq_vectors scsi: scsi_devinfo: remove synchronous ALUA for NETAPP devices scsi: be2iscsi: set errno on error path scsi: be2iscsi: set errno on error path scsi: hpsa: fallback to use legacy REPORT PHYS command scsi: scsi_dh_alua: Fix RCU annotations scsi: hpsa: use %phN for short hex dumps scsi: hisi_sas: fix free'ing in probe and remove scsi: isci: switch to pci_alloc_irq_vectors scsi: ipr: Fix runaway IRQs when falling back from MSI to LSI scsi: dpt_i2o: double free on error path scsi: cxlflash: Migrate scsi command pointer to AFU command scsi: cxlflash: Migrate IOARRIN specific routines to function pointers scsi: cxlflash: Cleanup queuecommand() scsi: cxlflash: Cleanup send_tmf() scsi: cxlflash: Remove AFU command lock scsi: cxlflash: Wait for active AFU commands to timeout upon tear down scsi: cxlflash: Remove private command pool ...
2016-12-14Merge tag 'configfs-for-4.10' of git://git.infradead.org/users/hch/configfsLinus Torvalds
Pull configfs update from Christoph Hellwig: "Just one simple change from Andrzej to drop the pointless return value from the ->drop_link method" * tag 'configfs-for-4.10' of git://git.infradead.org/users/hch/configfs: fs: configfs: don't return anything from drop_link
2016-12-14Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "This merge request includes the dax-4.0-iomap-pmd branch which is needed for both ext4 and xfs dax changes to use iomap for DAX. It also includes the fscrypt branch which is needed for ubifs encryption work as well as ext4 encryption and fscrypt cleanups. Lots of cleanups and bug fixes, especially making sure ext4 is robust against maliciously corrupted file systems --- especially maliciously corrupted xattr blocks and a maliciously corrupted superblock. Also fix ext4 support for 64k block sizes so it works well on ppcle. Fixed mbcache so we don't miss some common xattr blocks that can be merged" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits) dax: Fix sleep in atomic contex in grab_mapping_entry() fscrypt: Rename FS_WRITE_PATH_FL to FS_CTX_HAS_BOUNCE_BUFFER_FL fscrypt: Delay bounce page pool allocation until needed fscrypt: Cleanup page locking requirements for fscrypt_{decrypt,encrypt}_page() fscrypt: Cleanup fscrypt_{decrypt,encrypt}_page() fscrypt: Never allocate fscrypt_ctx on in-place encryption fscrypt: Use correct index in decrypt path. fscrypt: move the policy flags and encryption mode definitions to uapi header fscrypt: move non-public structures and constants to fscrypt_private.h fscrypt: unexport fscrypt_initialize() fscrypt: rename get_crypt_info() to fscrypt_get_crypt_info() fscrypto: move ioctl processing more fully into common code fscrypto: remove unneeded Kconfig dependencies MAINTAINERS: fscrypto: recommend linux-fsdevel for fscrypto patches ext4: do not perform data journaling when data is encrypted ext4: return -ENOMEM instead of success ext4: reject inodes with negative size ext4: remove another test in ext4_alloc_file_blocks() Documentation: fix description of ext4's block_validity mount option ext4: fix checks for data=ordered and journal_async_commit options ...
2016-12-14Merge tag 'for-f2fs-4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "This patch series contains several performance tuning patches regarding to the IO submission flow, in addition to supporting new features such as a ZBC-base drive and multiple devices. It also includes some major bug fixes such as: - checkpoint version control - fdatasync-related roll-forward recovery routine - memory boundary or null-pointer access in corner cases - missing error cases It has various minor clean-up patches as well" * tag 'for-f2fs-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (66 commits) f2fs: fix a missing size change in f2fs_setattr f2fs: fix to access nullified flush_cmd_control pointer f2fs: free meta pages if sanity check for ckpt is failed f2fs: detect wrong layout f2fs: call sync_fs when f2fs is idle Revert "f2fs: use percpu_counter for # of dirty pages in inode" f2fs: return AOP_WRITEPAGE_ACTIVATE for writepage f2fs: do not activate auto_recovery for fallocated i_size f2fs: fix to determine start_cp_addr by sbi->cur_cp_pack f2fs: fix 32-bit build f2fs: set ->owner for debugfs status file's file_operations f2fs: fix incorrect free inode count in ->statfs f2fs: drop duplicate header timer.h f2fs: fix wrong AUTO_RECOVER condition f2fs: do not recover i_size if it's valid f2fs: fix fdatasync f2fs: fix to account total free nid correctly f2fs: fix an infinite loop when flush nodes in cp f2fs: don't wait writeback for datas during checkpoint f2fs: fix wrong written_valid_blocks counting ...
2016-12-14Merge tag 'dlm-4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm fixes from David Teigland: "This set fixes error reporting for dlm sockets, removes the unbound property on the dlm callback workqueue to improve performance, and includes a couple trivial changes" * tag 'dlm-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: fix error return code in sctp_accept_from_sock() dlm: don't specify WQ_UNBOUND for the ast callback workqueue dlm: remove lock_sock to avoid scheduling while atomic dlm: don't save callbacks after accept dlm: audit and remove any unnecessary uses of module.h dlm: make genl_ops const
2016-12-14Merge tag 'jfs-4.10' of git://github.com/kleikamp/linux-shaggyLinus Torvalds
Pull jfs update from David Kleikamp: "The jfs piece of the current_time() series" * tag 'jfs-4.10' of git://github.com/kleikamp/linux-shaggy: fs: jfs: Replace CURRENT_TIME_SEC by current_time()
2016-12-13Revert "nvme: add support for the Write Zeroes command"Linus Torvalds
This reverts commit 6d31e3ba232ea22458b2f36b6d3f2f9f11bf3fa4. This causes bootup problems for me both on my laptop and my desktop. What they have in common is that they have NVMe disks with dm-crypt, but it's not the same controller, so it's not controller-specific. Jens does not see it on his machine (also NVMe), so it's presumably something that triggers just on bootup. Possibly related to dm-crypt and the fact that I mark my luks volume with "allow-discards" in /etc/crypttab. It's 100% repeatable for me, which made it fairly straightforward to bisect the problem to this commit. Small mercies. So we don't know what the reason is yet, but the revert is needed to get things going again. Acked-by: Jens Axboe <axboe@fb.com> Cc: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-13Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - struct thread_info moved off-stack (also touching include/linux/thread_info.h and include/linux/restart_block.h) - cpus_have_cap() reworked to avoid __builtin_constant_p() for static key use (also touching drivers/irqchip/irq-gic-v3.c) - uprobes support (currently only for native 64-bit tasks) - Emulation of kernel Privileged Access Never (PAN) using TTBR0_EL1 switching to a reserved page table - CPU capacity information passing via DT or sysfs (used by the scheduler) - support for systems without FP/SIMD (IOW, kernel avoids touching these registers; there is no soft-float ABI, nor kernel emulation for AArch64 FP/SIMD) - handling of hardware watchpoint with unaligned addresses, varied lengths and offsets from base - use of the page table contiguous hint for kernel mappings - hugetlb fixes for sizes involving the contiguous hint - remove unnecessary I-cache invalidation in flush_cache_range() - CNTHCTL_EL2 access fix for CPUs with VHE support (ARMv8.1) - boot-time checks for writable+executable kernel mappings - simplify asm/opcodes.h and avoid including the 32-bit ARM counterpart and make the arm64 kernel headers self-consistent (Xen headers patch merged separately) - Workaround for broken .inst support in certain binutils versions * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (60 commits) arm64: Disable PAN on uaccess_enable() arm64: Work around broken .inst when defective gas is detected arm64: Add detection code for broken .inst support in binutils arm64: Remove reference to asm/opcodes.h arm64: Get rid of asm/opcodes.h arm64: smp: Prevent raw_smp_processor_id() recursion arm64: head.S: Fix CNTHCTL_EL2 access on VHE system arm64: Remove I-cache invalidation from flush_cache_range() arm64: Enable HIBERNATION in defconfig arm64: Enable CONFIG_ARM64_SW_TTBR0_PAN arm64: xen: Enable user access before a privcmd hvc call arm64: Handle faults caused by inadvertent user access with PAN enabled arm64: Disable TTBR0_EL1 during normal kernel execution arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1 arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro arm64: Factor out PAN enabling/disabling into separate uaccess_* macros arm64: Update the synchronous external abort fault description selftests: arm64: add test for unaligned/inexact watchpoint handling arm64: Allow hw watchpoint of length 3,5,6 and 7 arm64: hw_breakpoint: Handle inexact watchpoint addresses ...
2016-12-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "The main bulk of the s390 patches for the 4.10 merge window: - Add support for the contiguous memory allocator. - The recovery for I/O errors in the dasd device driver is improved, the driver will now remove channel paths that are not working properly. - Additional fields are added to /proc/sysinfo, the extended partition name and the partition UUID. - New naming for PCI devices with system defined UIDs. - The last few remaining alloc_bootmem calls are converted to memblock. - The thread_info structure is stripped down and moved to the task_struct. The only field left in thread_info is the flags field. - Rework of the arch topology code to fix a fake numa issue. - Refactoring of the atomic primitives and add a new preempt_count implementation. - Clocksource steering for the STP sync check offsets. - The s390 specific headers are changed to make them usable with CLANG. - Bug fixes and cleanup" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (70 commits) s390/cpumf: Use configuration level indication for sampling data s390: provide memmove implementation s390: cleanup arch/s390/kernel Makefile s390: fix initrd corruptions with gcov/kcov instrumented kernels s390: exclude early C code from gcov profiling s390/dasd: channel path aware error recovery s390/dasd: extend dasd path handling s390: remove unused labels from entry.S s390/vmlogrdr: fix IUCV buffer allocation s390/crypto: unlock on error in prng_tdes_read() s390/sysinfo: show partition extended name and UUID if available s390/numa: pin all possible cpus to nodes early s390/numa: establish cpu to node mapping early s390/topology: use cpu_topology array instead of per cpu variable s390/smp: initialize cpu_present_mask in setup_arch s390/topology: always use s390 specific sched_domain_topology_level s390/smp: use smp_get_base_cpu() helper function s390/numa: always use logical cpu and core ids s390: Remove VLAIS in ptff() and clear_table() s390: fix machine check panic stack switch ...
2016-12-13Merge tag 'for-linus-4.10-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "Xen features and fixes for 4.10 These are some fixes, a move of some arm related headers to share them between arm and arm64 and a series introducing a helper to make code more readable. The most notable change is David stepping down as maintainer of the Xen hypervisor interface. This results in me sending you the pull requests for Xen related code from now on" * tag 'for-linus-4.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits) xen/balloon: Only mark a page as managed when it is released xenbus: fix deadlock on writes to /proc/xen/xenbus xen/scsifront: don't request a slot on the ring until request is ready xen/x86: Increase xen_e820_map to E820_X_MAX possible entries x86: Make E820_X_MAX unconditionally larger than E820MAX xen/pci: Bubble up error and fix description. xen: xenbus: set error code on failure xen: set error code on failures arm/xen: Use alloc_percpu rather than __alloc_percpu arm/arm64: xen: Move shared architecture headers to include/xen/arm xen/events: use xen_vcpu_id mapping for EVTCHNOP_status xen/gntdev: Use VM_MIXEDMAP instead of VM_IO to avoid NUMA balancing xen-scsifront: Add a missing call to kfree MAINTAINERS: update XEN HYPERVISOR INTERFACE xenfs: Use proc_create_mount_point() to create /proc/xen xen-platform: use builtin_pci_driver xen-netback: fix error handling output xen: make use of xenbus_read_unsigned() in xenbus xen: make use of xenbus_read_unsigned() in xen-pciback xen: make use of xenbus_read_unsigned() in xen-fbfront ...
2016-12-13Merge branch 'stable/for-linus-4.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: - minor fixes (rate limiting), remove certain functions - support for DMA_ATTR_SKIP_CPU_SYNC which is an optimization in the DMA API * 'stable/for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: Minor fix-ups for DMA_ATTR_SKIP_CPU_SYNC support swiotlb: Add support for DMA_ATTR_SKIP_CPU_SYNC swiotlb-xen: Enforce return of DMA_ERROR_CODE in mapping function swiotlb: Drop unused functions swiotlb_map_sg and swiotlb_unmap_sg swiotlb: Rate-limit printing when running out of SW-IOMMU space
2016-12-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "Small release, the most interesting stuff is x86 nested virt improvements. x86: - userspace can now hide nested VMX features from guests - nested VMX can now run Hyper-V in a guest - support for AVX512_4VNNIW and AVX512_FMAPS in KVM - infrastructure support for virtual Intel GPUs. PPC: - support for KVM guests on POWER9 - improved support for interrupt polling - optimizations and cleanups. s390: - two small optimizations, more stuff is in flight and will be in 4.11. ARM: - support for the GICv3 ITS on 32bit platforms" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (94 commits) arm64: KVM: pmu: Reset PMSELR_EL0.SEL to a sane value before entering the guest KVM: arm/arm64: timer: Check for properly initialized timer on init KVM: arm/arm64: vgic-v2: Limit ITARGETSR bits to number of VCPUs KVM: x86: Handle the kthread worker using the new API KVM: nVMX: invvpid handling improvements KVM: nVMX: check host CR3 on vmentry and vmexit KVM: nVMX: introduce nested_vmx_load_cr3 and call it on vmentry KVM: nVMX: propagate errors from prepare_vmcs02 KVM: nVMX: fix CR3 load if L2 uses PAE paging and EPT KVM: nVMX: load GUEST_EFER after GUEST_CR0 during emulated VM-entry KVM: nVMX: generate MSR_IA32_CR{0,4}_FIXED1 from guest CPUID KVM: nVMX: fix checks on CR{0,4} during virtual VMX operation KVM: nVMX: support restore of VMX capability MSRs KVM: nVMX: generate non-true VMX MSRs based on true versions KVM: x86: Do not clear RFLAGS.TF when a singlestep trap occurs. KVM: x86: Add kvm_skip_emulated_instruction and use it. KVM: VMX: Move skip_emulated_instruction out of nested_vmx_check_vmcs12 KVM: VMX: Reorder some skip_emulated_instruction calls KVM: x86: Add a return value to kvm_emulate_cpuid KVM: PPC: Book3S: Move prototypes for KVM functions into kvm_ppc.h ...
2016-12-13Merge tag 'hwmon-for-linus-v4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - new drivers for TMP108 and TC654 - hwmon core code cleanup - coretemp driver cleanup - fix overflow issues in several drivers - minor fixes, cleanups and enhancements in various drivers * tag 'hwmon-for-linus-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (41 commits) hwmon: (g762) Fix overflows and crash seen when writing limit attributes hwmon: (emcw201) Fix overflows seen when writing into limit attributes hwmon: (emc2103) Fix overflows seen when temperature limit attributes hwmon: (lm85) Fix overflows seen when writing voltage limit attributes hwmon: (lm87) Fix overflow seen when writing voltage limit attributes hwmon: (nct7802) Fix overflows seen when writing into limit attributes hwmon: (adt7470) Fix overflows seen when writing into limit attributes hwmon: (adt7462) Fix overflows seen when writing into limit attributes hwmon: (adm1026) Fix overflows seen when writing into limit attributes hwmon: (adm1025) Fix overflows seen when writing voltage limits hwmon: (via-cputemp) Convert to hotplug state machine devicetree: hwmon: Add documentation for TMP108 driver. hwmon: Add Texas Instruments TMP108 temperature sensor driver. hwmon: (core) Simplify sysfs attribute name allocation hwmon: (core) Rename groups parameter in API to extra_groups hwmon: (core) Explain why at least two attribute groups are allocated hwmon: (core) Make is_visible callback truly mandatory hwmon: (core) Deprecate hwmon_device_register() hwmon: (core) Clarify use of chip attributes hwmon: (core) Add support for string attributes to new API ...
2016-12-13Merge tag 'spi-v4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The nicest things about this release for me is seeing some older drivers getting some cleanups and modernization, it's really good to see things moving forwards even for older drivers. In content terms it's a fairly humdrum release but where the work has been happening is great. - Support for simultaneous use of internal and GPIO chip selects for devices that require the use of the internal select even if it's not connected and a GPIO is actually routed to the slave device. - A major rework and cleanup of the fsl-espi driver from Heiner Kallweit which should make it work substantially better. - DMA support for Freescale DSPI IPs. - New drivers for Freescale LPSPI IPs and Marvell Armada 3700. - Support for Allwinner H3" * tag 'spi-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (85 commits) spi: mvebu: fix baudrate calculation for armada variant spi: Add support for Armada 3700 SPI Controller spi: armada-3700: Add documentation for the Armada 3700 SPI Controller spi: fsl-lpspi: quit reading rx fifo under error condition spi: fsl-lpspi: use GPL as module license spi: fsl-espi: fix ioread16/iowrite16 endianness spi: fsl-espi: remove unused linearization code spi: fsl-espi: eliminate need for linearization when reading from hardware spi: fsl-espi: eliminate need for linearization when writing to hardware spi: fsl-espi: determine need for byte swap only once spi: fsl-lpspi: read lpspi tx/rx fifo size in probe() spi: fsl-lpspi: use wait_for_completion_timeout() while waiting transfer done spi: orion: fix comment to mention MVEBU spi: atmel: remove the use of private channel fields spi: atmel: trivial: remove unused fields in DMA structure spi: atmel: Use SPI core DMA mapping framework spi: atmel: Use core SPI_MASTER_MUST_[RT]X handling spi: atmel: trivial: move info banner to latest probe action spi: imx: replace schedule() with cond_resched() spi: imx: fix potential shift truncation ...
2016-12-13Merge branch 'for-4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull another libata patch from Tejun Heo: "One more patch from Adam added. It makes libata skip probing for NCQ prio unless the feature is explicitly requested by the user. This is necessary because some controllers lock up after the optional feature is probed" * 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: avoid probing NCQ Prio Support if not explicitly requested
2016-12-13ata: avoid probing NCQ Prio Support if not explicitly requestedAdam Manzanares
Previously, when the ata device was being initialized we were probing for NCQ prio support by checking the identify information and also checking the log page that holds information about ncq prio support. This caused an error on an Intel HBA so the code is now updated to only probe for NCQ prio support when the sysfs variable controlling NCQ prio support is enabled. tj: Update formatting, switch to spin_[un]lock_irq() and update locking a bit, use REVALIDATE instead of RESET, and return -EIO instead of -EINVAL on config failure. Signed-off-by: Adam Manzanares <adam.manzanares@wdc.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-12-13Merge branch 'for-4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - Adam added opt-in ATA command priority support. - There are machines which hide multiple nvme devices behind an ahci BAR. Dan Williams proposed a solution to force-switch the mode but deemed too hackishd. People are gonna discuss the proper way to handle the situation in nvme standard meetings. For now, detect and warn about the situation. - Low level driver specific changes. Christoph Hellwig pipes in about the hidden nvme warning: "I wish that was the case. We've pretty much agreed that we'll want to implement it as a virtual PCIe root bridge, similar to Intels other 'innovation' VMD that we work around that way. But Intel management has apparently decided that they don't want to spend more cycles on this now that Lenovo has an optional BIOS that doesn't force this broken mode anymore, and no one outside of Intel has enough information to implement something like this. So for now I guess this warning is it, until Intel reconsideres and spends resources on fixing up the damage their Chipset people caused" * 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: warn about remapped NVMe devices ahci-remap.h: add ahci remapping definitions nvme: move NVMe class code to pci_ids.h pata: imx: support controller modes up to PIO4 pata: imx: add support of setting timings for PIO modes pata: imx: set controller PIO mode with .set_piomode callback pata: imx: sort headers out ata: set ncq_prio_enabled iff device has support ata: ATA Command Priority Disabled By Default ata: Enabling ATA Command Priorities block: Add iocontext priority to request ahci: qoriq: added ls1046a platform support
2016-12-13Merge branch 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
Pull workqueue updates from Tejun Heo: "Mostly patches to initialize workqueue subsystem earlier and get rid of keventd_up(). The patches were headed for the last merge cycle but got delayed due to a bug found late minute, which is fixed now. Also, to help debugging, destroy_workqueue() is more chatty now on a sanity check failure." * 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: move wq_numa_init() to workqueue_init() workqueue: remove keventd_up() debugobj, workqueue: remove keventd_up() usage slab, workqueue: remove keventd_up() usage power, workqueue: remove keventd_up() usage tty, workqueue: remove keventd_up() usage mce, workqueue: remove keventd_up() usage workqueue: make workqueue available early during boot workqueue: dump workqueue state on sanity check failures in destroy_workqueue()
2016-12-13Merge branch 'md-next' into md-linusShaohua Li
2016-12-13Merge branch 'for-4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu update from Tejun Heo: "This includes just one patch to reject non-power-of-2 alignments and trigger warning. Interestingly, this actually caught a bug in XEN ARM64" * 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: ensure the requested alignment is power of two
2016-12-13Merge tag 'char-misc-4.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny changes over lots of "minor" driver subsystems, the largest being some new FPGA drivers. Other than that, a few other new drivers, but no new driver subsystems added for this kernel cycle, a nice change. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (107 commits) uio-hv-generic: store physical addresses instead of virtual Tools: hv: kvp: configurable external scripts path uio-hv-generic: new userspace i/o driver for VMBus vmbus: add support for dynamic device id's hv: change clockevents unbind tactics hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels() hyperv: Fix spelling of HV_UNKOWN mei: bus: enable non-blocking RX mei: fix the back to back interrupt handling mei: synchronize irq before initiating a reset. VME: Remove shutdown entry from vme_driver auxdisplay: ht16k33: select framebuffer helper modules MAINTAINERS: add git url for fpga fpga: Clarify how write_init works streaming modes fpga zynq: Fix incorrect ISR state on bootup fpga zynq: Remove priv->dev fpga zynq: Add missing \n to messages fpga: Add COMPILE_TEST to all drivers uio: pruss: add clk_disable() char/pcmcia: add some error checking in scr24x_read() ...
2016-12-13dm flakey: introduce "error_writes" featureMike Snitzer
Recent dm-flakey fixes, to have reads error out during the "down" interval, made it so that the previous read behaviour is no longer available. It is useful to have reads complete like normal but have writes error out, so make it possible again with a new "error_writes" feature. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-12-13Merge tag 'driver-core-4.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the new driver core patches for 4.10-rc1. Big thing here is the nice addition of "functional dependencies" to the driver core. The idea has been talked about for a very long time, great job to Rafael for stepping up and implementing it. It's been tested for longer than the 4.9-rc1 date, we held off on merging it earlier in order to feel more comfortable about it. Other than that, it's just a handful of small other patches, some good cleanups to the mess that is the firmware class code, and we have a test driver for the deferred probe logic. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits) firmware: Correct handling of fw_state_wait() return value driver core: Silence device links sphinx warning firmware: remove warning at documentation generation time drivers: base: dma-mapping: Fix typo in dmam_alloc_non_coherent comments driver core: test_async: fix up typo found by 0-day firmware: move fw_state_is_done() into UHM section firmware: do not use fw_lock for fw_state protection firmware: drop bit ops in favor of simple state machine firmware: refactor loading status firmware: fix usermode helper fallback loading driver core: firmware_class: convert to use class_groups driver core: devcoredump: convert to use class_groups driver core: class: add class_groups support kernfs: Declare two local data structures static driver-core: fix platform_no_drv_owner.cocci warnings drivers/base/memory.c: Remove unused 'first_page' variable driver core: add CLASS_ATTR_WO() drivers: base: cacheinfo: support DT overrides for cache properties drivers: base: cacheinfo: add pr_fmt logging drivers: base: cacheinfo: fix boot error message when acpi is enabled ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 06:37:27 +0000