summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-04-11Input: twl4030_keypad - fix potential NULL dereference in twl4030_kp_probe()Axel Lin
We should first check whether platform data is NULL or not, before dereferencing it to get the keymap. Signed-off-by: Axel Lin <axel.lin@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-06Input: h3600_ts - fix error handling at connectChristoph Fritz
In case of an error in h3600ts_connect(), deconstruct in correct order and with the right calls. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-06Input: twl4030_keypad - avoid potential NULL-pointer dereferenceShubhrajyoti D
Signed-off-by: Shubhrajyoti D <a0393217@india.ti.com> Acked-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-02Input: rpckbd - fix a leak of the IRQ during init failureAxel Lin
In rpckbd_open prror path, free_irq() was using NULL rather than the driver data as the data pointer so free_irq() wouldn't have matched. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-31Input: wacom - add support for Lenovo tablet ID (0xE6)Manoj Iyer
Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-31Input: i8042 - downgrade selftest error message to dbg()Paul Bolle
On a "really fragile" laptop I noticed a single i8042.c: i8042 controller selftest failed. (0x1 != 0x55) error in the log. But there's no reason to print this message at KERN_ERR level each time that loop fails, especially since the message telling about the overall selftest failure is printed at KERN_INFO level (on X86). Add an actual error message for non-X86 systems, where a selftest failure is (apparently) more serious. Remove a space in an another error message. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-31Input: synaptics - fix crash in synaptics_module_init()Jan Beulich
'struct dmi_system_id' arrays must always have a terminator to keep dmi_check_system() from looking at data (and possibly crashing) it isn't supposed to look at. The issue went unnoticed until ef8313bb1a22e7d2125d9d758aa8a81f1de91d81, but was introduced about a year earlier with 7705d548cbe33f18ea7713b9a07aa11047aaeca4 (which also similarly changed lifebook.c, but the problem there got eliminated shortly afterwards). The first hunk therefore is a stable candidate back to 2.6.33, while the full change is needed only on 2.6.38. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-31Input: spear-keyboard - fix inverted condition in interrupt handlerRajeev Kumar
We should return IRQ_NONE from interrupt handler in case keyboard does not report DATA_AVAIL condition. Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-31Input: uinput - allow for 0/0 min/max on absolute axes.Peter Hutterer
Some devices provide absolute axes with min/max of 0/0 (e.g. wacom's ABS_MISC axis). Current uinput restrictions do not allow duplication of these devices and require hacks in userspace to work around this. If the kernel accepts physical devices with a min/max of 0/0, uinput shouldn't disallow the same range. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-28Input: sparse-keymap - report KEY_UNKNOWN for unknown scan codesSeth Forshee
This allows for debugging non-functional keys easily from userspace. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-28Input: sparse-keymap - report scancodes with key eventsSeth Forshee
Scancodes are useful debugging aids when incorrect keycodes are being sent, as is common with laptop hotkeys. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-26Input: h3600_ts_input - fix a spelling errorSylvestre Ledru
Signed-off-by: Sylvestre Ledru <sylvestre.ledru@scilab.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-26Input: wacom - report resolution for pen devicesPing Cheng
Touch resolution is reported to the userland by retrieving the value from the HID descriptor. But pen resolution is not since it can not be retrieved. The current Wacom X driver has a resolution table. To centralize the source of these values, the resolution entries are added in the wacom_features struct for x and y coordinates respectively. The values are then reported to the userland. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-26Input: wacom - constify wacom_features for a new missed Bamboo modelsPing Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-23Input: tsc2005 - fix locking issueAaro Koskinen
Commit 0b950d3 (Input: tsc2005 - add open/close) introduced a locking issue with the ESD watchdog: __tsc2005_disable() is calling cancel_delayed_work_sync() with mutex held, and the work also needs the same mutex. Fix the problem by using mutex_trylock() in tsc2005_esd_work(). If the mutex is taken, we know we are in the middle of disable or enable and the watchdog check can be skipped. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-23Input: tsc2005 - use relative jiffies to schedule the watchdogAaro Koskinen
Use relative jiffies to schedule the watchdog. Otherwise it will run like a mad one. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-23Input: tsc2005 - driver should depend on GENERIC_HARDIRQSGeert Uytterhoeven
drivers/input/touchscreen/tsc2005.c: In function ‘tsc2005_probe’: drivers/input/touchscreen/tsc2005.c:666: error: implicit declaration of function ‘set_irq_wake’ In addition, migrate from set_irq_wake() (marked "do not use" as of commit a0cd9ca2b907d7ee26575e7b63ac92dad768a75e ("genirq: Namespace cleanup")) to irq_set_irq_wake(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-18Merge branch 'next' into for-linusDmitry Torokhov
2011-03-16Merge branch 'tsc2005' into nextDmitry Torokhov
2011-03-16Input: tsc2005 - remove 'disable' sysfs attributeDmitry Torokhov
I believe that enable/disable functionality should not be implemented on the individual driver level but rather in device core, potentially reusing parts of PM framework. Therefore the driver-specific "disable" attribute is removed from the mainline driver. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - add open/closeDmitry Torokhov
Introduce open and close methods for the input device to keep the device powered down when it is not in use. Also rework interaction between interrupt thread and starting/shutting off/resetting the device: instead of taking a mutex in the intterrupt thread and elsewhere disable interrupts before transitioning the device in a new state. The ESD handling is also separated from the IRQ thread; we poll regularly at a given interval and simply skip reads if we see that valid interrupt happened not so long ago. This allows us not cancel and reschedule ESD work from interrupt context all the time. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - handle read errors from SPI layerDmitry Torokhov
Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - do not rearm timer in hardirq handlerDmitry Torokhov
We will most likely rearm it yet again the IRQ thread so doing it here is pointless. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - don't use work for 'pen up' handlingDmitry Torokhov
We do not need process context to send input events so let's switch to a regular timer. I am going to get rid of taking ts->mutex in tsc2005_irq_thread() later. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - do not use 0 in place of NULLDmitry Torokhov
Sparse in unhappy when people use 0 instead of NULL for pointers so let's rework the way we initialize spi_transfer structure in tsc2005_cmd() and tsc2005_write(). Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - use true/false for boolean variablesDmitry Torokhov
Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - hide selftest attribute if we can't resetDmitry Torokhov
If implementation to perform self-test/reset has not been provided by the platform code hide 'selftest' sysfs attribute instead of returning error when someone tries to use it. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - rework driver initialization codeDmitry Torokhov
We need to make sure we have time/work initialized before requesting and enabling interrupts, otherwise we might start using them way too early. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - set up bus type in input deviceDmitry Torokhov
We know what bus we are residing on (SPI) so let's make this data available to the users. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - set up parent deviceDmitry Torokhov
Set up SPI device as parent of the input device so it gets placed into proper place in sysfs tree. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - clear driver data after unbindingDmitry Torokhov
We should not leave garbage pointers in driver structure after we unbind it from the device or if bind fails. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - add module descriptionDmitry Torokhov
Add proper module description so that it would show in 'modinfo' output. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - remove driver banner messageDmitry Torokhov
The boot process is noisy as it is and input core already announces all new device so let's get rid of the banner message in the driver. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - remove incorrect module aliasDmitry Torokhov
TSC2005 is not a platform driver so it should not define "platform:tsc2005" module alias. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - convert to using dev_pm_opsDmitry Torokhov
Newer code should not be using legacy suspend/resume methods but rather supply dev_pm_ops structure as it allows better control over power management. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - use spi_get/set_drvdata()Dmitry Torokhov
Instead of peeking into underlying device and using dev_get/set_drvdata(), let's use SPI layer's implementation to access driver-private data (which may be different from driver-core private data). Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: introduce tsc2005 driverLauri Leukkunen
Discussions: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg26748.html Introduce a driver for the Texas Instruments TSC2005 touchscreen controller (http://focus.ti.com/docs/prod/folders/print/tsc2005.html). The patch is based on a driver by Lauri Leukkunen, with modifications by David Brownell, Phil Carmody, Imre Deak, Hiroshi DOYU, Ari Kauppi, Tony Lindgren, Jarkko Nikula, Eero Nurkkala and Roman Tereshonkov. Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com> [aaro.koskinen@nokia.com: patch description, rebasing & cleanup] Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> [ext-srikar.1.bhavanarayana@nokia.com: various fixes] Signed-off-by: Srikar <ext-srikar.1.bhavanarayana@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: xen-kbdfront - move to drivers/input/miscDmitry Torokhov
drivers/input is reserved for input core code and input handlers with drivers belonging to one of the sub-directories. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: xen-kbdfront - add grant reference for shared pageDaniel De Graaf
Without a grant reference, full access to the domain's memory is required to use the shared page. Add an additional parameter in xenstore to allow grant mapping to be used. Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ian Campbell <Ian.Campbell@eu.citrix.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: xen-kbdfront - advertise either absolute or relative coordinatesOlaf Hering
A virtualized display device is usually viewed with the vncviewer application, either by 'xm vnc domU' or with vncviewer localhost:port. vncviewer and the RFB protocol provides absolute coordinates to the virtual display. These coordinates are either passed through to a PV guest or converted to relative coordinates for a HVM guest. A PV guest receives these coordinates and passes them to the kernels evdev driver. There it can be picked up by applications such as the xorg-input drivers. Using absolute coordinates avoids issues such as guest mouse pointer not tracking host mouse pointer due to wrong mouse acceleration settings in the guests X display. Advertise either absolute or relative coordinates to the input system and the evdev driver, depending on what dom0 provides. The xorg-input driver prefers relative coordinates even if a devices provides both. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-15Input: tc3589x-keypad - fix 'double const' warningDmitry Torokhov
Also rearrange driver structure initializer a bit. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-15Input: tca6416-keypad - suspend/resume wakeup supportMagnus Damm
Extend the tca6416 driver to use enable_irq_wake() and disable_irq_wake() in the suspend/resume hooks. This makes it possible to wake up from suspend-to-ram using a tca6416 key on the sh7372 mackerel board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-14Input: atmel_mxt_ts - add objects of mXT1386 chipJoonyoung Shim
Atmel mXT1386 chip is operated by atmel_mxt_ts driver and it has some different objects. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-14Input: atmel_mxt_ts - remove firmware version checkJoonyoung Shim
Atmel touchscreen chips have different firmware version with each chip, so we cannot distinguish attribute of chip by firmware version. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-14Input: wm831x-ts - ensure the controller is in a known state on openMark Brown
Explicitly set all the enable bits when opening the device just in case something left the device in an unexpected state. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-13Input: add Atmel AT42QT1070 keypad driverBo Shen
The AT42QT1070 QTouch sensor supports up to 7 keys. The driver has been tested on Atmel AT91SAM9M10-G45-EK board, and it should work fine on other platforms. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12Input: wm831x-ts - default pressure measurements onMark Brown
tslib expects pressure measurements so enable them by default for better compatibility. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12Input: bcm5974 - add support for MacBookPro8Andy Botting
This patch add multitouch support for the MacBookPro8,1 and MacBookPro8,2 models. Cc: stable@kernel.org Signed-off-by: Andy Botting <andy@andybotting.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12Input: wacom - support 2FGT in MT formatPing Cheng
Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12Input: wacom - support one finger touch the touchscreen wayPing Cheng
There are two types of 1FGT devices supported in wacom_wac.c. Changing them to follow the existing touchscreen format, i.e., only report BTN_TOUCH as a valid tool type. Touch data will be ignored if pen is in proximity. This requires a touch up event sent if touch was down when pen comes in. The touch up event should be sent before any pen events are emitted. Otherwise, two pointers would race for the cursor. However, we can not send a touch up inside wacom_tpc_pen since pen and touch are on different logical port. That is why we have to check if touch is up before sending pen events. Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 09:02:20 +0000