| Age | Commit message (Collapse) | Author |
|---|
|
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.
Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
When stop_streaming is called while a frame is currently being retrieved, the
buffer being filled will still be returned with BUF_STATE_DONE. By resetting
the sequence number and checking before returning the buffer, it can now
correctly be returned with BUF_STATE_ERROR.
Signed-off-by: Martin Kaltenbrunner <modin@yuri.at>
Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add dev_dbg statements for easier future debugging; also change the warning
about packet ID mismatches to debug output to avoid flooding the logs. This
warning is only important in a very specific/rare use case when trying to
correlate input events with video data.
Signed-off-by: Martin Kaltenbrunner <modin@yuri.at>
Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add missing functions to query the single fixed frame size (960x540) and
supported frame rates. Technically, the SUR40 supports any arbitrary frame
rate up to 60 FPS, as it is polled and not interrupt-driven. For now, we
just report 30 and 60 FPS, which is sufficient to make most V4L2 tools work.
Signed-off-by: Martin Kaltenbrunner <modin@yuri.at>
Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The SUR40 hardware can deliver images at up to 60 FPS; at full USB2 bandwidth,
one raw frame will take about 11 ms to transmit. If the poll interval is above
5 ms, fully handling one frame will take longer than 16 ms and the overall
frame rate will drop below 60 FPS. To get the full frame rate without blocking
all the time and still allowing for a bit of timing jitter, we reduce the poll
interval to 4 ms.
Signed-off-by: Martin Kaltenbrunner <modin@yuri.at>
Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
U8 and U16LE format human readable names were translated with string
containing emulated word. These strings were taken from msi2500 driver,
where those formats were emulated (after module parameter is set). But
on API correct names should be used, without any special case notes.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add complex unsigned 8-bit sample format for SDR capture.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Use these defines instead of hardcoding this in any driver that needs it.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The mapping of COLORSPACE_DEFAULT, YCBCR_ENC_DEFAULT or QUANTIZATION_DEFAULT
to proper non-default values is fairly complex, and it is something that
needs to be done both in the kernel and in userspace.
So add macros that can do this conversion, making this available to both
kernel and userspace.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Document this new colorspace define.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
V4L2_COLORSPACE_RAW is added for raw image formats where the picture
is minimally processed and is in the internal colorspace of the sensor.
This is typically used in digital cameras where the image processing is
done later.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Document this new colorspace define.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
V4L2_COLORSPACE_DEFAULT is added so we have a specific define for
the default case where applications do not set it but leave it to 0.
In that case the driver will set the colorspace based on what it
captures.
This is already used, but we never had a define for the value 0.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The log_status ioctl should report if the audio input has mode Bilingual. However, the
check against the itv->dualwatch_stereo_mode is completely wrong and is a left-over from
the distant past. Not only is the bitmask obviously wrong, the test itself is broken too
since itv->dualwatch_stereo_mode is no longer a bitmask at all.
Fix this code properly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This format was added but not documented. Do this now.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Support for V4L2_PIX_FMT_Y16_BE, a 16 bit big endian greyscale format.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
16 bit greyscale format, structured in Big Endian. Such a format can be
converted into a PMN image just by adding a header.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
dma_map_sg returns the number of areas mapped by the hardware,
which could be different than the areas given as an input.
The output must be saved to nent.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
dma_map_sg returns the number of areas mapped by the hardware,
which could be different than the areas given as an input.
The output must be saved to nent.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
When sg_alloc_table_from_pages() does not fail it returns a sg_table
structure with nents and nents_orig initialized to the same value.
dma_map_sg returns the number of areas mapped by the hardware,
which could be different than the areas given as an input.
The output must be saved to nent.
The output of dma_map, should be used to transverse the scatter list.
dma_unmap_sg needs the value passed to dma_map_sg (nents_orig).
sg_free_tables uses also orig_nent.
This patch fix the file to follow this paradigm.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The adv7604 driver depends on GPIOLIB, and therefore cobalt depends
on it as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/pci/saa7164/saa7164-i2c.c:45:33: warning: Using plain integer as NULL pointer
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/dvb-frontends/cx24120.c:837:6: warning: symbol 'cx24120_calculate_ber_window' was not declared. Should it be static?
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/pci/cobalt/cobalt-v4l2.c:189:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:191:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:192:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:193:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:194:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:195:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:196:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:197:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:198:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:199:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:201:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:202:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:203:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:234:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:240:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:246:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:266:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:267:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:271:28: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:275:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:276:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:312:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:313:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:314:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:315:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:317:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:320:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:321:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:321:36: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:324:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:327:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:328:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:328:41: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:329:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:331:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:332:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:334:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:335:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:336:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:362:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:367:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:368:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:420:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:421:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:422:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:423:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:516:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:516:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:518:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:518:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:518:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:525:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:525:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:546:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:546:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:548:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:549:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:550:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:551:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:552:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:553:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:554:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:555:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:556:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:556:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:556:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:563:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:564:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:564:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:569:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:595:16: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:602:9: warning: dereference of noderef expression
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/pci/cobalt/cobalt-i2c.c:130:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:147:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:151:26: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:156:34: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:206:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:210:26: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:215:34: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:225:27: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:335:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:336:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:337:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:348:34: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:352:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:353:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:356:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:357:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:359:17: warning: dereference of noderef expression
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/pci/cobalt/cobalt-irq.c:62:33: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:64:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:65:23: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:72:21: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:73:25: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:74:25: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:82:33: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:83:33: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:91:25: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:94:23: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:103:25: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:107:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:109:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:116:13: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:119:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:120:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:122:17: warning: dereference of noderef expression
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/pci/cobalt/cobalt-flash.c:101:5: warning: symbol 'cobalt_flash_probe' was not declared. Should it be static?
drivers/media/pci/cobalt/cobalt-flash.c:126:6: warning: symbol 'cobalt_flash_remove' was not declared. Should it be static?
drivers/media/pci/cobalt/cobalt-cpld.c:101:6: warning: symbol 'cobalt_cpld_status' was not declared. Should it be static?
drivers/media/pci/cobalt/cobalt-cpld.c:240:6: warning: symbol 'cobalt_cpld_set_freq' was not declared. Should it be static?
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/pci/cobalt/cobalt-flash.c:39:36: warning: incorrect type in initializer (different address spaces)
drivers/media/pci/cobalt/cobalt-flash.c:54:36: warning: incorrect type in initializer (different address spaces)
drivers/media/pci/cobalt/cobalt-flash.c:63:36: warning: incorrect type in initializer (different address spaces)
drivers/media/pci/cobalt/cobalt-flash.c:82:36: warning: incorrect type in initializer (different address spaces)
drivers/media/pci/cobalt/cobalt-flash.c:107:19: warning: incorrect type in assignment (different address spaces)
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/tuners/e4000.c:287:3: warning: this decimal constant is unsigned only in ISO C90
.rangehigh = 2208000000L,
^
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Fixes these warnings:
drivers/media/pci/cobalt/cobalt-omnitek.c: In function 'omni_sg_dma_start':
drivers/media/pci/cobalt/cobalt-omnitek.c:112:28: warning: right shift count >= width of type [-Wshift-count-overflow]
iowrite32((u32)(desc->bus >> 32), DESCRIPTOR(s->dma_channel) + 4);
^
drivers/media/pci/cobalt/cobalt-omnitek.c: In function 'descriptor_list_create':
drivers/media/pci/cobalt/cobalt-omnitek.c:222:28: warning: right shift count >= width of type [-Wshift-count-overflow]
d->next_h = (u32)(next >> 32);
^
drivers/media/pci/cobalt/cobalt-omnitek.c:268:32: warning: right shift count >= width of type [-Wshift-count-overflow]
d->next_h = (u32)(desc->bus >> 32);
^
drivers/media/pci/cobalt/cobalt-omnitek.c:275:27: warning: right shift count >= width of type [-Wshift-count-overflow]
d->next_h = (u32)(next >> 32);
^
drivers/media/pci/cobalt/cobalt-omnitek.c: In function 'descriptor_list_chain':
drivers/media/pci/cobalt/cobalt-omnitek.c:293:31: warning: right shift count >= width of type [-Wshift-count-overflow]
d->next_h = (u32)(next->bus >> 32);
^
drivers/media/pci/cobalt/cobalt-omnitek.c: In function 'descriptor_list_loopback':
drivers/media/pci/cobalt/cobalt-omnitek.c:332:30: warning: right shift count >= width of type [-Wshift-count-overflow]
d->next_h = (u32)(desc->bus >> 32);
^
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
[linuxtv-media:master 1023/1029] ERROR: "__aeabi_uldivmod" [drivers/media/pci/cobalt/cobalt.ko] undefined!
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The interrupt bit assignments use for the adv7511 were off by one.
This means that the current scheme (bit << (4 * stream_index)) can
no longer be used.
Fix this by precalculating and storing the correct masks in the
cobalt_stream struct.
This wasn't noticed before because the adv7511 interrupts are very
rare. But for CEC support these interrupts are essential, so this made
me realize that it wasn't working correctly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The DVB part of the media API documentation has several
legacy things on it:
- Examples that don't work;
- APIs unused and deprecated;
- places mentioning the wrong API version.
Fix them and bump the documentation version, in order to
reflect the cleanup efforts to make it more consistent with
the current status of the API.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Due to a cut-and-paste error, the argument is missing or wrong
on 3 ioctl documentation. Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The notes there are somewhat confusing and assumes that the
reader would have read the DVBv3 way. This is not true anymore,
as the DVBv3 is now on a separate section that is marked as
deprecated.
So, cleanup the notes.
While here, add a note about using libdvbv5, instead of using
the DVBv5 API directly.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
In order to make it clearer about how to use the DVBv5 calls,
add an example of its usage. That should make it clearer about
what's actually required for the DVBv5 calls to work.
While here, also mentions the libdvbv5 library.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Rename the tytle of the struct documentation to reflect
the name of the structures, and use links to do cross-ref.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Format it as a table and links it with the legacy API xml.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Format it as a table and add more details, in special for
DTMB guard intervals.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Format it as a table and add more details. Also, remove the
duplicated occurrences.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
fe_bandwidth/fe_bandwidth_t is used only on DVBv3 API. So, move
it to the frontend legacy xml, and convert it into a table.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Format it as a table and add more details, in special, for
the DTMB modes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Format it as a table and provide more details.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
At frontend legacy API description, there are three places
where fe_modulation_t is defined. Cross-reference it to point
to the right place at the documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The typedef parser is wrong and doesn't get some of the
types defined at the DVB API. Improve it, as we want to add
cross-references to those types.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
There are a few issues at FE_GET_INFO documentation:
- name is a string, not a pointer to a string;
- the return text should be after the paragraph.
While here, better to bold that two fields of the structure used
by FE_GET_INFO are actually deprecated.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Instead of using programlisting, use a table, as this provides
a better view of the structure.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The fe_type is deprecated at the DVB API. However, it may still
be used by legacy DVBv3 applications. While this works with old
devices, modern devices may support more than one delivery
system.
Add an explanation about that and a point to what should be
used, instead, in order for legacy apps to support newer hardware.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Instead of just showing ioctls, let's add an introdutory text
briefly explaining the DVB frontend API.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
What's written there about the arguments for this ioctl
is bogus: it doesn't return an enum (or a typedef)
for enum fe_status. Instead, it returns a bitmask with the
values defined by enum fe_status.
Also, the size of the integer returned is not 16 bits, but,
instead, sizeof(fe_status_t), e. g. sizeof(enum), with is
arch-dependent.
This should of course be fixed, but this should be done on
a separate patch.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
