summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-04-01cirrusfb: use 5-6-5 RGB for 16bpp modeKrzysztof Helt
Use the 5-6-5 RGB mode instead of the 5-5-5 mode at 16bpp depth. It fixes colors in the 16bpp modes on Cirrus Laguna chips. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Geert Uytterhoeven <geert.uytterhoeven@gmail.com> Cc: Arthur Marsh <arthur.marsh@internode.on.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01cirrusfb: do not calculate line length twiceKrzysztof Helt
A line length is calculated twice: first in the cirrusfb_decode_var() then in the cirrusfb_set_par_foo(). Use the first calculated value. A nice side effect is that 32bpp mode works now. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Geert Uytterhoeven <geert.uytterhoeven@gmail.com> Cc: Arthur Marsh <arthur.marsh@internode.on.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01cirrusfb: add mmio registers for Laguna chipsetsKrzysztof Helt
The Laguna chipsets use special registers which are available through the mmio area. The cirrusfb driver does not use memory mapped registers for the PCI cards. Add the memory mapped area for Laguna chipsets and add basic usage of the special Laguna registers after SVGALIB code. This gives readable console at 16bpp on the GD-5465 (Laguna AGP). The 8bpp and 32bpp depths are still broken. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01cirrusfb: add Laguna additional overflow registerKrzysztof Helt
Add additional overflow register setting for Laguna chips. Also, simplify some code in the cirrusfb_pan_display() and cirrusfb_blank(). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01cirrusfb: fix Laguna chipset memory detection and clock settingKrzysztof Helt
Fix memory detection and clock setting for Cirrus Laguna chipsets (GD5464/GD5465). The changes are done after the Xorg code. The driver still does not display anything on the GD5465 but it switches resolutions correctly at least. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01cirrusfb: convert printks to dev_fooKrzysztof Helt
Convert all printks to dev_dbg, dev_info or dev_err. Kill some excessive debug information and code in the process. [akpm@linux-foundation.org: printk fixes] [akpm@linux-foundation.org: cleanups] Signed-off-by: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01atyfb: fix header file trailing whitespaceRandy Dunlap
Fix trailing whitespace because quilt complained about it. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01drivers/video/uvesafb.c: don't use gfp_any()Andrew Morton
GFP_KERNEL is legal here - we don't need to use gfp_any(). Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc: test before subtraction on unsignedRoel Kluin
new_alarm is unsigned so test before the subtraction. [akpm@linux-foundation.org: time-wrapping fix] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-v3020: coding style cleanupMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-wm8350: retries will reach -1Roel Kluin
With a postfix decrement retries will reach -1 rather than 0, so the warning and error-out will not occur. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc: add EPSON RX8025 support to DS1307 RTC driverMatthias Fuchs
Add support for the EPSON RX8025 RTC. The date/time registers of this chip are compatible with the DS1307. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-ds1307: true SMBus compatibilityEd Swierk
Allow the rtc-ds1307 driver to work with SMBus controllers like nforce2 that do not support i2c block transfers. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: BARRE Sebastien <sbarre@sdelcc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-parisc: rename p pointer to rtcdann frazier
Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-parisc: remove a couple unnecessary variablesdann frazier
Signed-off-by: dann frazier <dannf@hp.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-parisc: remove unnecessary ret variabledann frazier
Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-parisc: declare rtc_parisc_dev as staticdann frazier
Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-parisc: use platform_driver_probedann frazier
This isn't a hotpluggable device, so call platform_driver_probe directly in parisc_rtc_init Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-parisc: use rtc_valid_tm() in parisc_get_timedann frazier
Use the return value of rtc_valid_tm() instead of just returning 0. Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-parisc: remove struct parisc_rtcdann frazier
parisc_rtc now only includes an rtc_device pointer, so let's just use the rtc_device type directly. Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-parisc: remove redundant lockingdann frazier
The RTC subsystem proides ops locking, no need to implement our own Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-parisc: add a missing include for linux/rtc.hdann frazier
Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc: add platform driver for EFIdann frazier
Munge Stephane Eranian's efirtc.c code into an rtc platform driver [akpm@linux-foundation.org: use is_leap_year()] Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Cc: stephane eranian <eranian@googlemail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc: convert LEAP_YEAR into an inlineAndrew Morton
- the LEAP_YEAR macro is buggy - it references its arg multiple times. Fix this by turning it into a C function. - give it a more approriate name - Move it to rtc.h so that other .c files can use it, instead of copying it. Cc: dann frazier <dannf@hp.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Cc: stephane eranian <eranian@googlemail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc: convert wm8350 use new alarm and update operationsMark Brown
These are the only two ioctls so the ioctl() function is also removed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01autofs4: fix kernel includesIan Kent
autofs_dev-ioctl.h is included by both the kernel module and user space tools and it includes two kernel header files. Compiles work if the kernel headers are installed but fail otherwise. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01autofs4: fix lookup deadlockIan Kent
A deadlock can occur when user space uses a signal (autofs version 4 uses SIGCHLD for this) to effect expire completion. The order of events is: Expire process completes, but before being able to send SIGCHLD to it's parent ... Another process walks onto a different mount point and drops the directory inode semaphore prior to sending the request to the daemon as it must ... A third process does an lstat on on the expired mount point causing it to wait on expire completion (unfortunately) holding the directory semaphore. The mount request then arrives at the daemon which does an lstat and, deadlock. For some time I was concerned about releasing the directory semaphore around the expire wait in autofs4_lookup as well as for the mount call back. I finally realized that the last round of changes in this function made the expiring dentry and the lookup dentry separate and distinct so the check and possible wait can be done anywhere prior to the mount call back. This patch moves the check to just before the mount call back and inside the directory inode mutex release. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01autofs4: cleanup expire code duplicationIan Kent
A significant portion of the autofs_dev_ioctl_expire() and autofs4_expire_multi() functions is duplicated code. This patch cleans that up. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01ecryptfs: use kzfree()Johannes Weiner
Use kzfree() instead of memset() + kfree(). Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01powerpc/fsl_soc: isolate legacy fsl_spi support to mpc832x_rdb boardsAnton Vorontsov
The advantages of this: - Don't encourage legacy support; - Less external symbols, less code to compile-in for !MPC832x_RDB platforms. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01powerpc/83xx: add mmc-spi support via the device tree for MPC8323E-RDBAnton Vorontsov
- Add gpio-controller node to manage QE GPIO Bank D; - Add mmc-spi node; - Modify board file so that it won't use legacy SPI support with the new device trees. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01powerpc: add mmc-spi-slot bindingsAnton Vorontsov
The bindings describes a case where MMC/SD/SDIO slot directly connected to a SPI bus. Such setups are widely used on embedded PowerPC boards. The patch also adds the mmc-spi-slot entry to the OpenFirmware modalias table. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01spi_mpc83xx: add OF platform driver bindingsAnton Vorontsov
Implement full support for OF SPI bindings. Now the driver can manage its own chip selects without any help from the board files and/or fsl_soc constructors. The "legacy" code is well isolated and could be removed as time goes by. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01spi_mpc83xx: rework chip selects handlingAnton Vorontsov
The main purpose of this patch is to pass 'struct spi_device' to the chip select handling routines. This is needed so that we could implement full-fledged OpenFirmware support for this driver. While at it, also: - Replace two {de,activate}_cs routines by single cs_contol(). - Don't duplicate platform data callbacks in mpc83xx_spi struct. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01spi_mpc83xx: fix sparse warningsAnton Vorontsov
The patch fixes following sparse warnings: CHECK spi_mpc83xx.c spi_mpc83xx.c:145:1: warning: symbol 'mpc83xx_spi_rx_buf_u8' was not declared. Should it be static? spi_mpc83xx.c:146:1: warning: symbol 'mpc83xx_spi_rx_buf_u16' was not declared. Should it be static? spi_mpc83xx.c:147:1: warning: symbol 'mpc83xx_spi_rx_buf_u32' was not declared. Should it be static? spi_mpc83xx.c:148:1: warning: symbol 'mpc83xx_spi_tx_buf_u8' was not declared. Should it be static? spi_mpc83xx.c:149:1: warning: symbol 'mpc83xx_spi_tx_buf_u16' was not declared. Should it be static? spi_mpc83xx.c:150:1: warning: symbol 'mpc83xx_spi_tx_buf_u32' was not declared. Should it be static? spi_mpc83xx.c:175:32: warning: incorrect type in initializer (different address spaces) spi_mpc83xx.c:175:32: expected void *tmp_ptr spi_mpc83xx.c:175:32: got unsigned int [noderef] <asn:2>*<noident> spi_mpc83xx.c:183:26: warning: incorrect type in argument 1 (different address spaces) spi_mpc83xx.c:183:26: expected unsigned int [noderef] [usertype] <asn:2>*reg spi_mpc83xx.c:183:26: got void *tmp_ptr spi_mpc83xx.c:184:26: warning: incorrect type in argument 1 (different address spaces) spi_mpc83xx.c:184:26: expected unsigned int [noderef] [usertype] <asn:2>*reg spi_mpc83xx.c:184:26: got void *tmp_ptr spi_mpc83xx.c:287:31: warning: incorrect type in initializer (different address spaces) spi_mpc83xx.c:287:31: expected void *tmp_ptr spi_mpc83xx.c:287:31: got unsigned int [noderef] <asn:2>*<noident> spi_mpc83xx.c:295:25: warning: incorrect type in argument 1 (different address spaces) spi_mpc83xx.c:295:25: expected unsigned int [noderef] [usertype] <asn:2>*reg spi_mpc83xx.c:295:25: got void *tmp_ptr spi_mpc83xx.c:296:25: warning: incorrect type in argument 1 (different address spaces) spi_mpc83xx.c:296:25: expected unsigned int [noderef] [usertype] <asn:2>*reg spi_mpc83xx.c:296:25: got void *tmp_ptr spi_mpc83xx.c:486:13: warning: symbol 'mpc83xx_spi_irq' was not declared. Should it be static? Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01ramfs: add support for "mode=" mount optionWu Fengguang
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=12843 "I use ramfs instead of tmpfs for /tmp because I don't use swap on my laptop. Some apps need 1777 mode for /tmp directory, but ramfs does not support 'mode=' mount option." Reported-by: Avan Anishchuk <matimatik@gmail.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01lis3: SPI transport layerDaniel Mack
Make use of the new abstraction layer and add a new transport layer for spi. Works fine on a PXA based board. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01lis3: solve dependency between core and ACPIDaniel Mack
This solves the dependency between lis3lv02d.[ch] and ACPI specific methods. It introduces a ->bus_priv pointer to the device struct which is casted to 'struct acpi_device' in the ACIP layer. Changed hp_accel.c accordingly. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01lis3: reorder functions to make forward decl obsoleteDaniel Mack
Move lis3lv02d_init_device() down so that the forward declaration of lis3lv02d_add_fs() becomes unnecessary. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01hp_accel: axis conversion for hp compaq 8710wLuca Cappa
I have a laptop HP Compaq 8710W, I compiled into my kernel the LIS3LV02DL and HP_ACCEL module drivers. While loading it cannot recognize the laptop model, so i am sending the necessary information to update the database of axis orientations. >When the laptop is horizontal the position reported is about 0 for X and Y >and a positive value for Z Yes, it is about 0,0,1000, the actual reading says: (-17,-26,1018); > If the left side is elevated, X increases (becomes positive) Yes, X goes toward to positive 1000. >If the front side (where the touchpad is) is elevated, Y decreases (becomes negative) No, Y goes toward to positive 1000. >If the laptop is put upside-down, Z becomes negative Yes, the laptop on a table Z gives 1000, and if upsidedown the Z reads -1000. So in few words the Y axis is inverted. Cc: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01hp_accel: add two more axis informationPavel Machek
Add two more laptops to whitelist. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Pavel Machek <pavel@ucw.cz> Cc: Daniel Mack <daniel@caiaq.de> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Vladimir Botka <vbotka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01hwmon: Add LTC4215 driverIra Snyder
Add Linux support for the Linear Technology LTC4215 Hot Swap controller I2C monitoring interface. I have tested the driver with my board, and it appears to work fine. With the power supplies disabled, it reads 11.93V input, 1.93V output, no current and no power. With the supplies enabled, it reads 11.93V input, 11.98V output, no current, no power. I'm not drawing any current at the moment, so this is reasonable. The value in the sense register never reads anything except 0, so I expect to get zero from the current and power calculations. I didn't attempt to support changing any of the chip's settings or enabling the FET. I'm not sure even how to do that and still fit within the hwmon framework. :) Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Cc: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01hwmon: LM95241 driverDavide Rizzo
An hwmon driver for the National Semiconductor LM95241 triple temperature sensors chip Signed-off-by: Davide Rizzo <elpa-rizzo@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01hp_accel: adev is poor name of exported symbolPavel Machek
As Andrew noted, adev is pretty poor name for symbol being exported. Rename it to lis3. Signed-off-by: Pavel Machek <pavel@ucw.cz> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Vladimir Botka <vbotka@suse.cz> Cc: <Quoc.Pham@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01hp_accel: small documentation updatesPavel Machek
Fix english in Documentation, add "how to test" description. Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Vladimir Botka <vbotka@suse.cz> Cc: <Quoc.Pham@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01epoll keyed wakeups: make tty use keyed wakeupsDavide Libenzi
Introduce keyed event wakeups inside the TTY code. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: William Lee Irwin III <wli@movementarian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01epoll keyed wakeups: make eventfd use keyed wakeupsDavide Libenzi
Introduce keyed event wakeups inside the eventfd code. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: William Lee Irwin III <wli@movementarian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01epoll keyed wakeups: teach epoll about hints coming with the wakeup keyDavide Libenzi
Use the events hint now sent by some devices, to avoid unnecessary wakeups for events that are of no interest for the caller. This code handles both devices that are sending keyed events, and the ones that are not (and event the ones that sometimes send events, and sometimes don't). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: William Lee Irwin III <wli@movementarian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01epoll keyed wakeups: make sockets use keyed wakeupsDavide Libenzi
Add support for event-aware wakeups to the sockets code. Events are delivered to the wakeup target, so that epoll can avoid spurious wakeups for non-interesting events. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: William Lee Irwin III <wli@movementarian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01epoll keyed wakeups: introduce new *_poll() wakeup macrosDavide Libenzi
Introduce new wakeup macros that allow passing an event mask to the wakeup targets. They exactly mimic their non-_poll() counterpart, with the added event mask passing capability. I did add only the ones currently requested, avoiding the _nr() and _all() for the moment. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: William Lee Irwin III <wli@movementarian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 10:50:44 +0000