summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-09-21wl12xx: make wl12xx.h common to both spi and sdioOhad Ben-Cohen
Move wl12xx.h outside of the spi-specific location, so it can be shared with both spi and sdio solutions. Update all users of spi/wl12xx.h accordingly Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-17iwlagn: initialize both tx/rx prio boost parametersWey-Yi Guy
For config bt command, initialize both tx_prio_boost and rx_prio_boost to "0". Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17iwlagn: minor coex API changesWey-Yi Guy
Adding two new parameters in config bt API. these two parameters use the 3 reserved bytes, so there is no structure size changes. Make sure set both parameters to "zero" in order to preserve previous behavior. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17iwlagn: correct naming for failure reply tx statusWey-Yi Guy
For failure tx status 0x90 and 0x91, give the correct name to reflect the errors. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17iwlwifi: corrections to debug output of ucode statisticsJay Sternberg
remove duplicate header and clean up format so it is defined once making changes consolicated ensuring consistancy of output. no function change to date displayed. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17iwlagn: adding aggregated frame failure status to debugfsWey-Yi Guy
Addition to standard tx frame failure report, adding aggregated frame failure report to debugfs Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17iwlagn: keep track of aggregated tx frames failure counterWey-Yi Guy
When uCode completed the aggregated frames transmission attempt, it will send tx command response with aggregated frame status. Keep track of the failure counter which help indicate any transmission error condition. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17iwlagn: log aggregation tx command statusWey-Yi Guy
For aggregated frames with block ack, different status flag will be used as part of tx command response. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17iwlagn: keep track of failure tx statusWey-Yi Guy
Tx command response sent to host by uCode after completed the transmission attempt. The status parameter indicates whether the transmission was successful, or else why if failed. Here we keep the counters to help understand the different failure cases. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17iwlagn: keep track fail tx reason counterWey-Yi Guy
If uCode fail to transmit frame, it will send reply tx back to driver with failure status; keep the counters of each failure cases for debugging. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17iwlagn: add bt_status_read for 5150Wey-Yi Guy
Include bt_status_read function pointer for 5150 device Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-16ath9k: fix regression which disabled ps on ath9kLuis R. Rodriguez
The patch titled "ath9k: Add new file init.c" shuffled some code around but in dong so for some reason also removed the revision check for disablign power save. Add this revision check again so we can get power save re-enabled again by default on cards newer than AR5416 and AR5418. $ git describe --contains 556242049cc3992d0ee625e9f15c4b00ea4baac8 v2.6.34-rc1~233^2~49^2~343 This patch has fixes for stable kernels [2.6.34+]. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath9k: fix regression which prevents chip sleep after CAB dataSenthil Balasubramanian
The patch: commit 293dc5dfdbcc16cde06e40a688394cc8ab083e48 Author: Gabor Juhos <juhosg@openwrt.org> Date: Fri Jun 19 12:17:48 2009 +0200 ath9k: remove ath_rx_ps_back_to_sleep helper This helper only clears the SC_OP_WAIT_FOR_{BEACON,CAB} flags. Remove it and clear these flags directly in the approptiate places instead. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> introduced a regression which forgot to lift the beacon flag after we received all broadcast and multicast data. This meant we never went to sleep consuming about ~650mW on idle. This pretty much broke power save completely. This patch has fixes for stable kernels [2.6.32+]. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Sameer Nanda <snanda@google.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16mac80211: send last 3/5 probe requests as unicastLuis R. Rodriguez
Some buggy APs do not respond to unicast probe requests or send unicast probe requests very delayed so in the worst case we should try to send broadcast probe requests, otherwise we can get disconnected from these APs. Even if drivers do not have filters to disregard probe responses from foreign APs mac80211 will only process probe responses from our associated AP for re-arming connection monitoring. We need to do this since the beacon monitor does not push back the connection monitor by design so even if we are getting beacons from these type of APs our connection monitor currently relies heavily on the way the probe requests are received on the AP. An example of an AP affected by this is the Nexus One, but this has also been observed with random APs. We can probably optimize this later by using null funcs instead of probe requests. For more details refer to: http://code.google.com/p/chromium-os/issues/detail?id=5715 This patch has fixes for stable kernels [2.6.35+]. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16mac80211: disable beacon monitor while going offchannelLuis R. Rodriguez
The beacon monitor should be disabled when going off channel to prevent spurious warnings and triggering connection deterioration work such as sending probe requests. Re-enable the beacon monitor once we come back to the home channel. This patch has fixes for stable kernels [2.6.34+]. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16mac80211: make the beacon monitor available externallyLuis R. Rodriguez
This will be used by other components next. The beacon monitor was added as of 2.6.34 so these fixes are applicable only to kernels >= 2.6.34. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16mac80211: reset connection idle when going offchannelLuis R. Rodriguez
When we go offchannel mac80211 currently leaves alive the connection idle monitor. This should be instead postponed until we come back to our home channel, otherwise by the time we get back to the home channel we could be triggering unecesary probe requests. For APs that do not respond to unicast probe requests (Nexus One is a simple example) this means we essentially get disconnected after the probes fails. This patch has stable fixes for kernels [2.6.35+] Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16mac80211: reset probe send counter upon connection timer resetLuis R. Rodriguez
Upon beacon loss we send probe requests after 30 seconds of idle time and we wait for each probe response 1/2 second. We send a total of 3 probe requests before giving up on the AP. In the case that we reset the connection idle monitor we should reset the probe requests count to 0. Right now this won't help in any way but the next patch will. This patch has fixes for stable kernel [2.6.35+]. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16mac80211: add helper for reseting the connection monitorLuis R. Rodriguez
This will be used in another place later. The connection monitor was added as of 2.6.35 so these fixes will be applicable to >= 2.6.35. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath9k: fix enabling ANI / tx monitor after bg scanLuis R. Rodriguez
ath9k's entire logic with SC_OP_SCANNING is incorrect due to the way mac80211 currently implements the scan complete callback and we handle it in ath9k. This patch removes the flag completely in preference for the SC_OP_OFFCHANNEL which is really what we wanted. The scanning flag was used to ensure we reset ANI to the old values when we go back to the home channel, but if we are offchannel we use some defaults. The flag was also used to re-enable the TX monitor. Without this patch we simply never re-enabled ANI and the TX monitor after going offchannel. This means that after one background scan we are prone to noise issues and if we had a TX hang we would not recover. To get this to work properly we must enable ANI after we have configured the beacon timers, otherwise hardware acts really oddly. This patch has stable fixes which apply down to [2.6.36+], there *may* be a to fix this on older kernels but requires a bit of work since this patch relies on the new mac80211 flag IEEE80211_CONF_OFFCHANNEL which was introduced as of 2.6.36. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath9k: fix regression on beacon loss after bgscanLuis R. Rodriguez
When we return to the home channel we were never reseting our beacon timers, this was casued by the fact that the scanning flag was still on even after we returned to our home channel. There are also other reasons why we would get a reset and if we are not off channel we always need to resynch our beacon timers, because a reset will clear them. This bug is a regression introduced on 2.6.36. The order of the changes are as follows: 5ee08656 - Sat Jul 31 - ath9k: prevent calibration during off-channel activity a0daa0e7 - Tue Jul 27 - Revert "mac80211: fix sw scan bracketing" 543708be - Fri Jun 18 - mac80211: fix sw scan bracketing mcgrof@tux ~/linux-2.6-allstable (git::master)$ git describe \ --contains 5ee0865615f65f84e6ee9174771a6716c29e08e1 v2.6.36-rc1~43^2~34^2~22 mcgrof@tux ~/linux-2.6-allstable (git::master)$ git describe \ --contains a0daa0e7592ada797d6835f11529097aabc27ad2 v2.6.36-rc1~571^2~64^2~13 mcgrof@tux ~/linux-2.6-allstable (git::master)$ git describe \ --contains 543708be320d7df692d24b349ca01a947b340764 v2.6.36-rc1~571^2~107^2~187 So 5ee08656 would have worked if a0daa0e7 was not committed but it was so this means 5ee08656 was broken since it assumed that when we were in the channel change routine the scan flag would be lifted. As it turns out the scan flag will be set when we are already on the home channel. For more details refer to: http://code.google.com/p/chromium-os/issues/detail?id=5715 These issues will need to be considered for our solution on reshifting the scan complete callback location on mac80211 on current development kernel work. This patch has stable fixes which apply down to [2.6.36+] Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath9k: fix power save race conditionsLuis R. Rodriguez
ath9k has a race on putting the chip into network sleep and having registers read from hardware. The race occurs because although ath9k_ps_restore() locks its own callers it makes use of some variables which get altered in the driver at different code paths. The variables are the ps_enabled and ps_flags. This is easily reprodicible in large network environments when roaming with the wpa_supplicant simple bgscan. You'd get some 0xdeadbeef read out on certain registers such as: ath: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 ath: RX failed to go idle in 10 ms RXSM=0xdeadbeef ath: timeout (100000 us) on reg 0x7000: 0xdeadbeef & 0x00000003 != 0x00000000 ath: Chip reset failed The fix is to protect the ath9k_config(hw, IEEE80211_CONF_CHANGE_PS) calls with a spin_lock_irqsave() which will disable contendors for these variables from interrupt context, timers, re-entry from mac80211 on the same callback, and most importantly from ath9k_ps_restore() which is the only call which will put the device into network sleep. There are quite a few threads and bug reports on these a few of them are: https://bugs.launchpad.net/ubuntu/karmic/+source/linux/+bug/407040 http://code.google.com/p/chromium-os/issues/detail?id=5709 http://code.google.com/p/chromium-os/issues/detail?id=5943 Stable fixes apply to [2.6.32+] Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath9k_htc: Fix register read through bulk pipeRajkumar Manoharan
To optimize register read/write operations, the HTC firmwares were patched to change EP3 and EP4 pipe types from Interrupt to Bulk. So register writes are submitted as bulk urbs, but register reads are not. Also changing the register read endpoint pipe as bulk type when URBs are filled improves the register reads considerably which results in reduced scan time and CPU utilization. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16mac80211: add p2p device type supportJohannes Berg
When a driver advertises p2p device support, mac80211 will handle it, but internally it will rewrite the interface type to STA/AP rather than P2P-STA/GO since otherwise a lot of paths need to be touched that are otherwise identical. A p2p boolean tells drivers whether or not a given interface will be used for p2p or not. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16cfg80211/nl80211: introduce p2p device typesJohannes Berg
This adds P2P-STA and P2P-GO as device types so we can distinguish between those and normal STA or AP (respectively) type interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath9k_hw: remove warning in ath9k_hw_def_get_num_ant_configRajkumar Manoharan
This patch fixes following warning drivers/net/wireless/ath/ath9k/eeprom_def.c: In function 'ath9k_hw_def_get_num_ant_config' drivers/net/wireless/ath/ath9k/eeprom_def.c:1425:47: warning: comparison between 'enum ath9k_hal_freq_band' and 'enum ieee80211_band' Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16libertas: correct sparse warningsJohn W. Linville
CHECK drivers/net/wireless/libertas/cfg.c drivers/net/wireless/libertas/cfg.c:493:19: warning: cast to restricted __le16 CHECK drivers/net/wireless/libertas/mesh.c drivers/net/wireless/libertas/mesh.c:577:16: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/mesh.c:577:16: expected restricted __le32 [addressable] [assigned] [usertype] id drivers/net/wireless/libertas/mesh.c:577:16: got bool Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath9k: make ath_ant_div_conf_fast_divbias staticJohn W. Linville
CHECK drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/ath/ath9k/recv.c:1341:6: warning: symbol 'ath_ant_div_conf_fast_divbias' was not declared. Should it be static? Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16iwlwifi: fix sparse warning about wrong enum for band parameterJohn W. Linville
drivers/net/wireless/iwlwifi/iwl-scan.c:386:27: warning: mixing different enum types drivers/net/wireless/iwlwifi/iwl-scan.c:386:27: int enum nl80211_band versus drivers/net/wireless/iwlwifi/iwl-scan.c:386:27: int enum ieee80211_band drivers/net/wireless/iwlwifi/iwl-scan.c:435:57: warning: mixing different enum types drivers/net/wireless/iwlwifi/iwl-scan.c:435:57: int enum ieee80211_band versus drivers/net/wireless/iwlwifi/iwl-scan.c:435:57: int enum nl80211_band drivers/net/wireless/iwlwifi/iwl-scan.c:474:53: warning: mixing different enum types drivers/net/wireless/iwlwifi/iwl-scan.c:474:53: int enum ieee80211_band versus drivers/net/wireless/iwlwifi/iwl-scan.c:474:53: int enum nl80211_band drivers/net/wireless/iwlwifi/iwl-scan.c:588:72: warning: mixing different enum types drivers/net/wireless/iwlwifi/iwl-scan.c:588:72: int enum ieee80211_band versus drivers/net/wireless/iwlwifi/iwl-scan.c:588:72: int enum nl80211_band Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16mac80211: set running state earlierJohannes Berg
When an interface is brought up, the recent changes to allow changing type-while-up only set the running bit after everything was done. This broke a number of things, including idle calculation for monitor interfaces, and it also broke WDS station insertion (although nobody noticed yet). Thus, change the code to set the running bit earlier, but keep it after the driver's add_interface was called because otherwise drivers may iterate over interfaces they haven't fully set up yet. Reported-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16cfg80211/mac80211: use lockdep_assert_heldJohannes Berg
Instead of using a WARN_ON(!mutex_is_locked()) use lockdep_assert_held() which compiles away completely when lockdep isn't enabled, and also is a more accurate assertion since it checks that the current thread is holding the mutex. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16mac80211: use correct station flags lockJohannes Berg
This code is modifying the station flags, and as such should hold the flags lock so it can do so atomically vs. other flags modifications and readers. This issue was introduced when this code was added in eccb8e8f, as it used the wrong lock (thus not fixing the race that was previously documented in a comment.) Cc: stable@kernel.org [2.6.31+] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath9k: Print rxfilter in debugfs.Ben Greear
Print raw and decoded rxfilter in debufs 'wiphy' file. Also, move variable-length printouts to bottom of file to make bounds checking easier. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath9k: calcrxfilter should take multiple VIFs into account.Ben Greear
When there is more than one VIF, listen for all beacons and ensure ATH9K_RX_FILTER_MCAST_BCAST_ALL is set. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath9k: Use common ath key management functionsBruno Randolf
Use key management functions which have been moved to ath/key.c and remove ath9k copies of these functions and other now unused definitions. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath5k: Use common crypt capabilities flagsBruno Randolf
Replace ah_aes_support and ah_combined_mic with common ath_crypt_caps ATH_CRYPT_CAP_CIPHER_AESCCM and ATH_CRYPT_CAP_MIC_COMBINED. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath/ath9k: Replace common->splitmic with a flagBruno Randolf
Replace common->splitmic with ATH_CRYPT_CAP_MIC_COMBINED flag. splitmic has to be used when the ATH_CRYPT_CAP_MIC_COMBINED capability flag is not set. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath5k: Remove old ath5k key handling functionsBruno Randolf
Remove the old ath5k key handling functions, since we now use the key management in ath common. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath5k: Use common ath key management functionsBruno Randolf
Use common ath key management functions in ath5k. This fixes problems with HW encryption in AP mode, which was broken in the ath5k implementation. Before (with the ath5k implementation) only one client could connect to the AP using HW encryption and WPA. When a second client connected, the first client was not able to send/receive any more packets. Because of the problems with HW encryption, software encryption was always used in AP mode, which resulted in a high CPU load (and/or low thruput) on embedded devices. Instead of trying to fix the implementation in ath5k it makes more sense to share the code with ath9k. This also enables HW encryption for AP mode again. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath: Copy key cache management functions from ath9k to athBruno Randolf
Copied the key cache management functions from ath9k (common.c and hw.c) to ath/key.c so we can use them from ath5k, later. Minor changes have been made: - renamed ath9k_* to ath_* - replaced ah->caps.keycache_size with common->keymax - removed ATH9K_IS_MIC_ENABLED since it is always true. - the AR_PCU_MIC_NEW_LOC_ENA flag is replaced with (splitmic == 0). Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath: Copy cryptographic capability flags into athBruno Randolf
This will be used later in this patch series. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16include/net/cfg80211.h: wiphy_<level> messages use dev_printkJoe Perches
The output becomes: [ 41.261941] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14wl1271: remove warnings in wl1271_sdio_set_powerJohn W. Linville
These were introduced in "wl1271: sdio: claim host only when doing IO" drivers/net/wireless/wl12xx/wl1271_sdio.c: In function ‘wl1271_sdio_set_power’: drivers/net/wireless/wl12xx/wl1271_sdio.c:193: warning: ‘return’ with a value, in function returning void drivers/net/wireless/wl12xx/wl1271_sdio.c:195: warning: ‘return’ with a value, in function returning void drivers/net/wireless/wl12xx/wl1271_sdio.c:186: warning: unused variable ‘func’ Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14mac80211: match only assigned bss in sta_info_get_bssJohannes Berg
sta_info_get_bss() is used to match STA pointers for VLAN/AP interfaces, but if the same station is also added to multiple other interfaces it will erroneously match because both pointers are NULL, fix this by ignoring NULL pointers here. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14ath9k_hw: remove useless hw capability flagsFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14ath9k_hw: handle rx key missFelix Fietkau
If AR_KeyMiss is set in the rx descriptor and AR_RxFrameOK is unset, the hardware could not locate a valid key during a decryption attempt. In this case, the frame must not be reported as decrypted, otherwise mac80211 sees only random garbage. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14mac80211: add a note about iterating interfaces during add_interface()Felix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14ath9k: fix BSSID mask calculationFelix Fietkau
At the time the .add_interface driver op is called, the interface has not been marked as running yet, so ieee80211_iterate_active_interfaces will not pass it to the iterator function. Because of this, the calculated BSSID mask is wrong, which breaks multi-BSS operation. Additionally, the current way of comparing all addresses against each other is pointless, as the hardware only uses the hardware MAC address and the BSSID mask for matching the destination address, so all the address array reallocation is completely unnecessary. This patch simplifies the logic by setting the initial mask bytes to 0xff and removing all bits in the iterator call that don't match the hardware MAC address. It also calls the iterator for the vif that was passed to add_interface() Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14ath9k_htc: Fix CPU usage issue during scan periodRajkumar Manoharan
The CPU consumption during the scan period is high, since the register write go over Interrupt endpoint. On downloading the firmware to the target, the USB descriptors are 'patched' to change the type of the endpoints from Interrupt to Bulk. With this fix, the CPU usage during a scan run comes down to acceptable levels. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14ath9k_htc: Fix memory leak on WMI event handlerRajkumar Manoharan
ath9k_wmi_ctrl_rx is racy with ath9k_wmi_tasklet on event notification due to which the wmi_skb may be overwritten which leads to memory leak. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-12 20:20:15 +0000