summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_phy.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_phy.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_mcu.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: phy: fix bank check in mt76x0_rf_csr_{wr,rr}Lorenzo Bianconi
Fix typo in bank check in mt76x0_rf_csr_{wr,rr} routines. This issue has never been hit since mt76x0_rf_csr_{wr,rr} are actually used just by pci code Fixes: 10de7a8b4ab9 ("mt76x0: phy files") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: use bus helper to identify rf access methodStanislaw Gruszka
Use mt76_is_usb() to identify RF access method instead of MT76_STATE_MCU_RUNNING flag and add warning since MCU has to be initialized before we can access RF registers via MCU. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: correct RF reg pairs write for PCIeStanislaw Gruszka
We have to use RF CSR method for PCIe. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: allow to identify busStanislaw Gruszka
Add helpers to identify bus type. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: correct RF access via RF_CSR register.Stanislaw Gruszka
PCIe version don't use MCU for RF registers access. We need to correct RF CSR method to support up to 127 RF registers. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: print BBP version only for debugStanislaw Gruszka
Use dev_dbg to print BBP version. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13rtlwifi: rtl8821ae: replace _rtl8821ae_mrate_idx_to_arfr_id with generic versionColin Ian King
Function _rtl8821ae_mrate_idx_to_arfr_id is functionally identical to the generic version rtl_mrate_idx_to_arfr_id, so remove _rtl8821ae_mrate_idx_to_arfr_id and use the generic one instead. This also fixes a missing break statement found by CoverityScan in _rtl8821ae_mrate_idx_to_arfr_id, namely: CID#1167237 ("Missing break in switch") Thanks to Joe Perches for spotting this when I submitted an earlier patch. Fixes: 3c05bedb5fef ("Staging: rtl8812ae: Add Realtek 8821 PCI WIFI driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> ACKed-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13iwlwifi: mvm: check return value of rs_rate_from_ucode_rate()Luca Coelho
The rs_rate_from_ucode_rate() function may return -EINVAL if the rate is invalid, but none of the callsites check for the error, potentially making us access arrays with index IWL_RATE_INVALID, which is larger than the arrays, causing an out-of-bounds access. This will trigger KASAN warnings, such as the one reported in the bugzilla issue mentioned below. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=200659 Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13Merge tag 'iwlwifi-next-for-kalle-2018-10-12' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Fourth set of iwlwifi patches intended for 4.20 * Support for a new scan type; * Clean-up in the queue handling code; * A few bug fixes;
2018-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts were easy to resolve using immediate context mostly, except the cls_u32.c one where I simply too the entire HEAD chunk. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12Merge branch 's390-qeth-next'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: updates 2018-10-12 please apply one more patchset for net-next. This extends the TSO support in qeth. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12s390/qeth: add TSO support for L2 devicesJulian Wiedmann
Except for the new HW header id, this works just like TSO6 on L3 devices and reuses all the existing data path support in qeth_xmit(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12s390/qeth: add support for IPv6 TSOJulian Wiedmann
This adds TSO6 support for L3 qeth devices. Just like for standard IPv6 traffic, TSO6 doesn't use IP offload and thus runs over the normal qeth_xmit() path. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12s390/qeth: enhance TSO control sequenceJulian Wiedmann
TSO6 requires the full programming sequence, and not just a simple START command. This implements the additional ENABLE command, and adds some sanity checks that were missing for the START command. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12s390/qeth: make TSO controls protocol-agnosticJulian Wiedmann
In preparation for IPv6 TSO, turn the protocol version into a parameter for the TSO control code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12Merge branch 'hns3-promisc-next'David S. Miller
Salil Mehta says: ==================== Fixes & small enhancements related to the promisc mode in HNS3 This patch-set presents some fixes and enhancements related to promiscuous mode and MAC VLAN Table full condition in HNS3 Ethernet Driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: hns3: Resume promisc mode and vlan filter status after loopback testJian Shen
This patch resumes promisc mode and vlan filter status after loopback test. Fixes: 3b75c3df599d ("net: hns3: net: hns3: Add support for IFF_ALLMULTI flag") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: hns3: Resume promisc mode and vlan filter status after resetJian Shen
This patch resumes promisc mode and vlan filter status after reset. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: hns3: Enable promisc mode when mac vlan table is fullJian Shen
Currently, the driver does nothing when mac vlan table is full. In this case, the packet with new mac address will be dropped by hardware. This patch adds check for the result of sync mac address, and enable promisc mode when mac vlan table is full. Furtherly, disable vlan filter when enable promisc by user command. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12netlink: replace __NLA_ENSURE implementationJohannes Berg
We already have BUILD_BUG_ON_ZERO() which I just hadn't found before, so we should use it here instead of open-coding another implementation thereof. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12Merge tag 'mac80211-next-for-davem-2018-10-12' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Highlights: * merge net-next, so I can finish the hwsim workqueue removal * fix TXQ NULL pointer issue that was reported multiple times * minstrel cleanups from Felix * simplify lib80211 code by not using skcipher, note that this will conflict with the crypto tree (and this new code here should be used) * use new netlink policy validation in nl80211 * fix up SAE (part of WPA3) in client-mode * FTM responder support in the stack ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: bridge: add support for per-port vlan statsNikolay Aleksandrov
This patch adds an option to have per-port vlan stats instead of the default global stats. The option can be set only when there are no port vlans in the bridge since we need to allocate the stats if it is set when vlans are being added to ports (and respectively free them when being deleted). Also bump RTNL_MAX_TYPE as the bridge is the largest user of options. The current stats design allows us to add these without any changes to the fast-path, it all comes down to the per-vlan stats pointer which, if this option is enabled, will be allocated for each port vlan instead of using the global bridge-wide one. CC: bridge@lists.linux-foundation.org CC: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12fore200e: fix sbus compileChristoph Hellwig
Fix a stupid typo introduced in the refactoring. Fixes: 0efe5523 ("fore200e: simplify fore200e_bus usage") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: Evict neighbor entries on carrier downDavid Ahern
When a link's carrier goes down it could be a sign of the port changing networks. If the new network has overlapping addresses with the old one, then the kernel will continue trying to use neighbor entries established based on the old network until the entries finally age out - meaning a potentially long delay with communications not working. This patch evicts neighbor entries on carrier down with the exception of those marked permanent. Permanent entries are managed by userspace (either an admin or a routing daemon such as FRR). Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net/ipv6: Add knob to skip DELROUTE message on device downDavid Ahern
Another difference between IPv4 and IPv6 is the generation of RTM_DELROUTE notifications when a device is taken down (admin down) or deleted. IPv4 does not generate a message for routes evicted by the down or delete; IPv6 does. A NOS at scale really needs to avoid these messages and have IPv4 and IPv6 behave similarly, relying on userspace to handle link notifications and evict the routes. At this point existing user behavior needs to be preserved. Since notifications are a global action (not per app) the only way to preserve existing behavior and allow the messages to be skipped is to add a new sysctl (net/ipv6/route/skip_notify_on_dev_down) which can be set to disable the notificatioons. IPv6 route code already supports the option to skip the message (it is used for multipath routes for example). Besides the new sysctl we need to pass the skip_notify setting through the generic fib6_clean and fib6_walk functions to fib6_clean_node and to set skip_notify on calls to __ip_del_rt for the addrconf_ifdown path. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: fddi: skfp: Remove unused macros 'PNMI_GET_ID' and 'PNMI_SET_ID'YueHaibing
The two PNMI macros are never used Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: cdc_ncm: remove set but not used variable 'ctx'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/usb/cdc_ncm.c: In function 'cdc_ncm_status': drivers/net/usb/cdc_ncm.c:1603:22: warning: variable 'ctx' set but not used [-Wunused-but-set-variable] struct cdc_ncm_ctx *ctx; It not used any more after commit fa83dbeee558 ("net: cdc_ncm: remove redundant "disconnected" flag") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12Merge tag 'armsoc-fixes-4.19' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Arnd writes: "ARM: SoC fixes for 4.19 Two last minute bugfixes, both for NXP platforms: * The Layerscape 'qbman' infrastructure suffers from probe ordering bugs in some configurations, a two-patch series adds a hotfix for this. 4.20 will have a longer set of patches to rework it. * The old imx53-qsb board regressed in 4.19 after the addition of cpufreq support, adding a set of explicit operating points fixes this." * tag 'armsoc-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: soc: fsl: qman_portals: defer probe after qman's probe soc: fsl: qbman: add APIs to retrieve the probing status ARM: dts: imx53-qsb: disable 1.2GHz OPP
2018-10-12afs: Fix afs_server struct leakDavid Howells
Fix a leak of afs_server structs. The routine that installs them in the various lookup lists and trees gets a ref on leaving the function, whether it added the server or a server already exists. It shouldn't increment the refcount if it added the server. The effect of this that "rmmod kafs" will hang waiting for the leaked server to become unused. Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-12MAINTAINERS: use the correct location for dt-bindings includes for muxPeter Rosin
Just drop the "linux" part of the path, it was never correct. Reported-by: Joe Perches <joe@perches.com> Fixes: 256ac0375098 ("dt-bindings: document devicetree bindings for mux-controllers and gpio-mux") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-12mux: adgs1408: use the correct MODULE_LICENSEPeter Rosin
The file is GPL v2 or later. Acked-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-12afs: Fix cell proc listDavid Howells
Access to the list of cells by /proc/net/afs/cells has a couple of problems: (1) It should be checking against SEQ_START_TOKEN for the keying the header line. (2) It's only holding the RCU read lock, so it can't just walk over the list without following the proper RCU methods. Fix these by using an hlist instead of an ordinary list and using the appropriate accessor functions to follow it with RCU. Since the code that adds a cell to the list must also necessarily change, sort the list on insertion whilst we're at it. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-12mac80211: implement ieee80211_tx_rate_update to update rateAnilkumar Kolli
Current mac80211 has provision to update tx status through ieee80211_tx_status() and ieee80211_tx_status_ext(). But drivers like ath10k updates the tx status from the skb except txrate, txrate will be updated from a different path, peer stats. Using ieee80211_tx_status_ext() in two different paths (one for the stats, one for the tx rate) would duplicate the stats instead. To avoid this stats duplication, ieee80211_tx_rate_update() is implemented. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> [minor commit message editing, use initializers in code] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-12Merge tag 'mmc-v4.19-rc7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Ulf writes: "MMC core: - Avoid fragile multiblock reads for the last sector in SPI mode WIFI/SDIO: - libertas: Fixup suspend sequence for the SDIO card" * tag 'mmc-v4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: libertas: call into generic suspend code before turning off power mmc: block: avoid multiblock reads for the last sector in SPI mode
2018-10-12nl80211: Add per peer statistics to compute FCS error rateAnkita Bajaj
Add support for drivers to report the total number of MPDUs received and the number of MPDUs received with an FCS error from a specific peer. These counters will be incremented only when the TA of the frame matches the MAC address of the peer irrespective of FCS error. It should be noted that the TA field in the frame might be corrupted when there is an FCS error and TA matching logic would fail in such cases. Hence, FCS error counter might not be fully accurate, but it can provide help in detecting bad RX links in significant number of cases. This FCS error counter without full accuracy can be used, e.g., to trigger a kick-out of a connected client with a bad link in AP mode to force such a client to roam to another AP. Signed-off-by: Ankita Bajaj <bankita@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-12Merge tag 'gpio-v4.19-4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Linus writes: "GPIO fix for the v4.19 series: - Fix up the interrupt parent for the irqdomains." * tag 'gpio-v4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Assign gpio_irq_chip::parents to non-stack pointer
2018-10-12Merge tag 'pinctrl-v4.19-5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Linus writes: "pin control fix for v4.19: A single pin control fix for v4.19: - Interrupt setup in the MCP23S08 driver." * tag 'pinctrl-v4.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: mcp23s08: fix irq and irqchip setup order
2018-10-12Merge tag 'mtd/fixes-for-4.19-rc8' of git://git.infradead.org/linux-mtdGreg Kroah-Hartman
Boris writes: "mdt: fix for 4.19-rc8 * Fix a stack overflow in lib/bch.c" * tag 'mtd/fixes-for-4.19-rc8' of git://git.infradead.org/linux-mtd: lib/bch: fix possible stack overrun
2018-10-12Merge tag 'drm-fixes-2018-10-12-1' of git://anongit.freedesktop.org/drm/drmGreg Kroah-Hartman
Dave writes: "drm fixes for 4.19-rc8 single nouveau runtime reference and mst change" * tag 'drm-fixes-2018-10-12-1' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/drm/nouveau: Grab runtime PM ref in nv50_mstc_detect()
2018-10-12Merge tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaGreg Kroah-Hartman
Doug writes: "RDMA fixes: Final for-rc pull request for 4.19 We only have one bug to submit this time around. It fixes a DMA unmap issue where we unmapped the DMA address from the IOMMU before we did from the card, resulting in a DMAR error with IOMMU enabled, or possible crash without." * tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/mlx5: Unmap DMA addr from HCA before IOMMU
2018-10-12mac80211: support FTM responder configuration/statisticsPradeep Kumar Chitrapu
New bss param ftm_responder is used to notify the driver to enable fine timing request (FTM) responder role in AP mode. Plumb the new cfg80211 API for FTM responder statistics through to the driver API in mac80211. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-12Merge branch 'for-linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Dmitry writes: "Input updates for v4.19-rc7 - we added a few scheduling points into various input interfaces to ensure that large writes will not cause RCU stalls - fixed configuring PS/2 keyboards as wakeup devices on newer platforms - added a new Xbox gamepad ID." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: uinput - add a schedule point in uinput_inject_events() Input: evdev - add a schedule point in evdev_write() Input: mousedev - add a schedule point in mousedev_write() Input: i8042 - enable keyboard wakeups by default when s2idle is used Input: xpad - add support for Xbox1 PDP Camo series gamepad
2018-10-12Merge tag 'next-fixes-20181012' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes Stephen writes: "A couple of warning fixes: Two fixes from Peter Oberparleiter <oberpar@linux.ibm.com>: Commit 6b7dca401cb1 ("tracing: Allow gcov profiling on only ftrace subsystem") uncovered linker problems when using gcov kernel profiling on some architectures. These problems were likely introduced earlier, and are possibly related to compiler changes." * tag 'next-fixes-20181012' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes: vmlinux.lds.h: Fix linker warnings about orphan .LPBX sections vmlinux.lds.h: Fix incomplete .text.exit discards
2018-10-12lib/bch: fix possible stack overrunArnd Bergmann
The previous patch introduced very large kernel stack usage and a Makefile change to hide the warning about it. From what I can tell, a number of things went wrong here: - The BCH_MAX_T constant was set to the maximum value for 'n', not the maximum for 't', which is much smaller. - The stack usage is actually larger than the entire kernel stack on some architectures that can use 4KB stacks (m68k, sh, c6x), which leads to an immediate overrun. - The justification in the patch description claimed that nothing changed, however that is not the case even without the two points above: the configuration is machine specific, and most boards never use the maximum BCH_ECC_WORDS() length but instead have something much smaller. That maximum would only apply to machines that use both the maximum block size and the maximum ECC strength. The largest value for 't' that I could find is '32', which in turn leads to a 60 byte array instead of 2048 bytes. Making it '64' for future extension seems also worthwhile, with 120 bytes for the array. Anything larger won't fit into the OOB area on NAND flash. With that changed, the warning can be enabled again. Only linux-4.19+ contains the breakage, so this is only needed as a stable backport if it does not make it into the release. Fixes: 02361bc77888 ("lib/bch: Remove VLA usage") Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netGreg Kroah-Hartman
David writes: "Networking 1) RXRPC receive path fixes from David Howells. 2) Re-export __skb_recv_udp(), from Jiri Kosina. 3) Fix refcounting in u32 classificer, from Al Viro. 4) Userspace netlink ABI fixes from Eugene Syromiatnikov. 5) Don't double iounmap on rmmod in ena driver, from Arthur Kiyanovski. 6) Fix devlink string attribute handling, we must pull a copy into a kernel buffer if the lifetime extends past the netlink request. From Moshe Shemesh. 7) Fix hangs in RDS, from Ka-Cheong Poon. 8) Fix recursive locking lockdep warnings in tipc, from Ying Xue. 9) Clear RX irq correctly in socionext, from Ilias Apalodimas. 10) bcm_sf2 fixes from Florian Fainelli." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) net: dsa: bcm_sf2: Call setup during switch resume net: dsa: bcm_sf2: Fix unbind ordering net: phy: sfp: remove sfp_mutex's definition r8169: set RX_MULTI_EN bit in RxConfig for 8168F-family chips net: socionext: clear rx irq correctly net/mlx4_core: Fix warnings during boot on driverinit param set failures tipc: eliminate possible recursive locking detected by LOCKDEP selftests: udpgso_bench.sh explicitly requires bash selftests: rtnetlink.sh explicitly requires bash. qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interface tipc: queue socket protocol error messages into socket receive buffer tipc: set link tolerance correctly in broadcast link net: ipv4: don't let PMTU updates increase route MTU net: ipv4: update fnhe_pmtu when first hop's MTU changes net/ipv6: stop leaking percpu memory in fib6 info rds: RDS (tcp) hangs on sendto() to unresponding address net: make skb_partial_csum_set() more robust against overflows devlink: Add helper function for safely copy string param devlink: Fix param cmode driverinit for string type devlink: Fix param set handling for string type ...
2018-10-11Merge branch 'net-dsa-bcm_sf2-Couple-of-fixes'David S. Miller
Florian Fainelli says: ==================== net: dsa: bcm_sf2: Couple of fixes Here are two fixes for the bcm_sf2 driver that were found during testing unbind and analysing another issue during system suspend/resume. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: dsa: bcm_sf2: Call setup during switch resumeFlorian Fainelli
There is no reason to open code what the switch setup function does, in fact, because we just issued a switch reset, we would make all the register get their default values, including for instance, having unused port be enabled again and wasting power and leading to an inappropriate switch core clock being selected. Fixes: 8cfa94984c9c ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: dsa: bcm_sf2: Fix unbind orderingFlorian Fainelli
The order in which we release resources is unfortunately leading to bus errors while dismantling the port. This is because we set priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now permissible to clock gate the switch. Later on, when dsa_slave_destroy() comes in from dsa_unregister_switch() and calls dsa_switch_ops::port_disable, we perform the same dismantling again, and this time we hit registers that are clock gated. Make sure that dsa_unregister_switch() is the first thing that happens, which takes care of releasing all user visible resources, then proceed with clock gating hardware. We still need to set priv->wol_ports_mask to 0 to make sure that an enabled port properly gets disabled in case it was previously used as part of Wake-on-LAN. Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 23:54:15 +0000