| Age | Commit message (Collapse) | Author |
|---|
|
The A83t, unlike previous SoCs, has the MCLK enable bit at the 8th bit of
the CLK_DIV register, unlike what is declared in the driver.
Fixes: 21faaea1343f ("ASoC: sun4i-i2s: Add support for A83T")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/43b07f8cd8e0e280c64ce61d57c307678c923e9b.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The A83t has the same bit fields offsets than the A10 and A31, while this
was the first device with the new layout, fix that.
Fixes: 21faaea1343f ("ASoC: sun4i-i2s: Add support for A83T")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/d93f0943cc39d880750daf459a0eeab34c63518e.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The LRCK polarity "normal" polarity in the I2S/TDM specs and in the
Allwinner datasheet are not the same. In the case where the i2s controller
is being used as the LRCK master, it's pretty clear when looked at under a
scope.
Let's fix this, and add a comment to clear up as much the confusion as
possible.
Fixes: 7d2993811a1e ("ASoC: sun4i-i2s: Add support for H3")
Fixes: 21faaea1343f ("ASoC: sun4i-i2s: Add support for A83T")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/e03fb6b2a916223070b9f18405b0ef117a452ff4.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The LRCK and BCLK polarity offsets on newer SoCs has been
changed, yet the driver didn't take it into account for all of them.
This was taken into account for the H3, but not the A83t. This was handled
using a reg_field for the H3.
However, the value in that field will not be the same, so reg_field is not
adapted in that case. Let's change for proper calls with the regular
values.
Fixes: 21faaea1343f ("ASoC: sun4i-i2s: Add support for A83T")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/9cbdde80a299288878e58225df4d7884e0301348.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The RX and TX counters registers offset have been swapped, fix that.
Fixes: fa7c0d13cb26 ("ASoC: sunxi: Add Allwinner A10 Digital Audio driver")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/8b26477560ad5fd8f69e037b167c5e61de5c26a3.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
From: Marcus Cooper <codekipper@gmail.com>
The clock division dividers have changed between the older (A10/A31) and
newer (H3, A64, etc) SoCs.
While this was addressed through an offset on some SoCs, it was missing
some dividers as well, so the support wasn't perfect. Let's introduce a
pointer in the quirk structure for the divider calculation functions to use
so we can have the proper range now.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
[Maxime: Fix the commit log, use a field in the quirk structure]
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/0e5b4abf06cd3202354315201c6af44caeb20236.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On the first generation of Allwinner SoCs (A10-A31), the i2s controller was
using the MCLK as BCLK parent. However, this changed since the introduction
of the A83t and BCLK now uses the module clock as its parent.
Let's introduce a hook to get the parent rate and use that in our divider
calculations.
Fixes: 7d2993811a1e ("ASoC: sun4i-i2s: Add support for H3")
Fixes: 21faaea1343f ("ASoC: sun4i-i2s: Add support for A83T")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/0b6665be216b3bd0e7bc43724818f05f3f8ee881.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The two main generations of our I2S controller require a slightly different
format configuration, mostly because of a quite different register layout
and some additional registers being needed on the newer generation.
This used to be controlled through a bunch of booleans, however this proved
to be quite impractical, especially since a bunch of SoCs forgot to set
those parameters and therefore were broken from that point of view.
Fixes: 21faaea1343f ("ASoC: sun4i-i2s: Add support for A83T")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/dc818644c3e40734e7a97247c994b1fca1c3c047.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The two main generations of our I2S controller require a slightly different
channel configuration, mostly because of a quite different register layout
and some additional registers being needed on the newer generation.
This used to be controlled through a bunch of booleans, however this proved
to be quite impractical, especially since a bunch of SoCs forgot to set
those parameters and therefore were broken from that point of view.
Fixes: 21faaea1343f ("ASoC: sun4i-i2s: Add support for A83T")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/6414463de69584e8227fa495b13aa5f4798e1f0e.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
pmc_plt_clk_0 quirk
Every single baytrail chromebook sets PMC to 0, as can be seeing
below by searching through coreboot source code:
$ grep -rl "PMC_PLT_CLK\[0\]" .
./rambi/variants/glimmer/devicetree.cb
./rambi/variants/clapper/devicetree.cb
./rambi/variants/swanky/devicetree.cb
./rambi/variants/enguarde/devicetree.cb
./rambi/variants/winky/devicetree.cb
./rambi/variants/kip/devicetree.cb
./rambi/variants/squawks/devicetree.cb
./rambi/variants/orco/devicetree.cb
./rambi/variants/ninja/devicetree.cb
./rambi/variants/heli/devicetree.cb
./rambi/variants/sumo/devicetree.cb
./rambi/variants/banjo/devicetree.cb
./rambi/variants/candy/devicetree.cb
./rambi/variants/gnawty/devicetree.cb
./rambi/variants/rambi/devicetree.cb
./rambi/variants/quawks/devicetree.cb
Plus, Cyan (only non-baytrail chromebook with max98090) also needs
this patch for audio to work.
Thus, this commit adds all the missing devices to bsw_max98090 quirk
table, implemented by commit a182ecd3809c ("ASoC: intel:
cht_bsw_max98090_ti: Add quirk for boards using pmc_plt_clk_0").
Signed-off-by: Daniel Stuart <daniel.stuart14@gmail.com>
Link: https://lore.kernel.org/r/20190815171300.30126-1-daniel.stuart14@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MCLK divider calculation is currently computing the ideal divider using
the oversample rate, the sample rate and the parent rate.
However, since we have access to the frequency is supposed to be running at
already, and as it turns out we're using it to compute the oversample rate,
we can just use the ratio between the parent rate and the MCLK rate to
simplify a bit the formula.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/dcc5deb2eb650758d268bddd20f60ba58856d024.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The sun4i_i2s_hw_params already has a variable holding the value returned
by params_channels, so let's just use that variable instead of calling
params_channels multiple times.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/c0faaac69ad40248f24eed3c3b2fa1ccc4a85b70.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The BCLK divider should be calculated using the parameters that actually
make the BCLK rate: the number of channels, the sampling rate and the
sample width.
We've been using the oversample_rate previously because in the former SoCs,
the BCLK's parent is MCLK, which in turn is being used to generate the
oversample rate, so we end up with something like this:
oversample = mclk_rate / sampling_rate
bclk_div = oversample / word_size / channels
So, bclk_div = mclk_rate / sampling_rate / word_size / channels.
And this is actually better, since the oversampling ratio only plays a role
because the MCLK is its parent, not because of what BCLK is supposed to be.
Furthermore, that assumption of MCLK being the parent has been broken on
newer SoCs, so let's use the proper formula, and have the parent rate as an
argument.
Fixes: 7d2993811a1e ("ASoC: sun4i-i2s: Add support for H3")
Fixes: 21faaea1343f ("ASoC: sun4i-i2s: Add support for A83T")
Fixes: 66ecce332538 ("ASoC: sun4i-i2s: Add compatibility with A64 codec I2S")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/c3595e3a9788c2ef2dcc30aa3c8c4953bb5cc249.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since the introduction of the driver, a new managed helper for the
dmaengine PCM registration has been created. Let's use it to simplify a bit
our probe and remove functions.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/606d271187091e858e8c15e20555af0b79798fe1.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
So far the regmap and the dmaengine PCM are registered after our component
has been, which means that our driver isn't properly initialised by then.
Let's fix that.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/67e303f37f141ef73ce9ed47d7f831b63c694424.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make '* Capture Mode' a mux. This makes DAPM know that in single-ended
mode only inverting mux paths need to be enabled.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/125cd3c9f298da9b08a4d6002d4c00d70a898950.1566298834.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Trivial fix for typo in "Capture Inverting Mux"es' name.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/f95ae1085f9f3c137a122c4d95728711613c15f7.1566298834.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pmc_plt_clk_0 quirk
Every single baytrail chromebook sets PMC to 0, as can be seeing
below by searching through coreboot source code:
$ grep -rl "PMC_PLT_CLK\[0\]" .
./rambi/variants/glimmer/devicetree.cb
./rambi/variants/clapper/devicetree.cb
./rambi/variants/swanky/devicetree.cb
./rambi/variants/enguarde/devicetree.cb
./rambi/variants/winky/devicetree.cb
./rambi/variants/kip/devicetree.cb
./rambi/variants/squawks/devicetree.cb
./rambi/variants/orco/devicetree.cb
./rambi/variants/ninja/devicetree.cb
./rambi/variants/heli/devicetree.cb
./rambi/variants/sumo/devicetree.cb
./rambi/variants/banjo/devicetree.cb
./rambi/variants/candy/devicetree.cb
./rambi/variants/gnawty/devicetree.cb
./rambi/variants/rambi/devicetree.cb
./rambi/variants/quawks/devicetree.cb
Plus, Cyan (only non-baytrail chromebook with max98090) also needs
this patch for audio to work.
Thus, this commit adds all the missing devices to bsw_max98090 quirk
table, implemented by commit a182ecd3809c ("ASoC: intel:
cht_bsw_max98090_ti: Add quirk for boards using pmc_plt_clk_0").
Signed-off-by: Daniel Stuart <daniel.stuart14@gmail.com>
Link: https://lore.kernel.org/r/20190815171300.30126-1-daniel.stuart14@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The tohdmitx glue uses regmap MMIO so it should require it.
Fixes: c8609f3870f7 ("ASoC: meson: add g12a tohdmitx control")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190820123510.22491-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the devm variant to get the formatter reset so it is properly freed
on device removal
Fixes: 751bd5db5260 ("ASoC: meson: axg-tdm-formatter: add reset")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190820123413.22249-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When transitioning to supend state, uniphier_aio_dai_suspend() is called
and asserts reset lines and disables clocks.
However, if there are two or more DAIs, uniphier_aio_dai_suspend() are
called multiple times, and double reset assersion will cause.
This patch defines the counter that has the number of DAIs at first, and
whenever uniphier_aio_dai_suspend() are called, it decrements the
counter. And only if the counter is zero, it asserts reset lines and
disables clocks.
In the same way, uniphier_aio_dai_resume() are called, it increments the
counter after deasserting reset lines and enabling clocks.
Fixes: 139a34200233 ("ASoC: uniphier: add support for UniPhier AIO CPU DAI driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1566281764-14059-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Even if ALH has no specific configuration, we still need to handle the
common parameters for all DAIs
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190815192018.30570-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Audio Link Hub DAI does not require any static configuration from
topology for now. We still need to pass the frame rate and format to
firmware.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190815192018.30570-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename SOUNDWIRE to ALH.
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190815192018.30570-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add dummy support for SAI/ESAI digital audio interface
IPs found on i.MX8 boards.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190815192018.30570-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For i.MX6 SoloX, there is a mode of the SoC to shutdown all power
source of modules during system suspend and resume procedure.
Thus, AUDMUX needs to save all the values of registers before the
system suspend and restore them after the system resume.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1565931794-7218-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Kconfig, PCI ID and chip info for EHL platform.
Note that the core mask is different from previous platforms, only
Core0 can be controlled by the host. Additional patches will be
required for multi-core functionality.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190815155749.29304-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are no upstream machine drivers just yet so just add dummy table
for compilation in nocodec-mode.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190815155749.29304-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Kconfig, PCI ID and chip info for Tiger Lake platform.
Note that the core mask is different from previous platforms, only
Core0 can be controlled by the host. Additional patches will be
required for multi-core functionality.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190815155749.29304-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Initial support for TGL w/ RT1308
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190815155749.29304-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The only configuration parameter is the ALH stream ID. No range
checking is done by the driver, the firmware should check that the
stream is valid for a specific hardware.
Bump the ABI Minor number to keep the alignment with SOF firmware
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190815155032.29181-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
reuse and add Cometlake support with:
SSP0 for DA7219 headphone codec
SSP1 for MAX98357a speaker amp codec
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1565851909-13825-1-git-send-email-mac.chiang@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The pcm_mutex is used to prevent concurrent execution of snd_pcm_ops
callbacks. This works fine most of the cases but it can not handle setups
when the same DAI is used by different rtd, for example:
pcm3168a have two DAIs: one for Playback and one for Capture.
If the codec is connected to a single CPU DAI we need to have two dai_link
to support both playback and capture.
In this case the snd_pcm_ops callbacks can be executed in parallel causing
unexpected races in DAI drivers.
By moving the pcm_mutex up to card level this can be solved
while - hopefully - not breaking other setups.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190813104532.16669-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sound/soc/codecs/88pm860x-codec.c:533:38: warning:
pcm_switch_controls defined but not used [-Wunused-const-variable=]
sound/soc/codecs/88pm860x-codec.c:560:38: warning:
aif1_mux defined but not used [-Wunused-const-variable=]
They are never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815092547.29564-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sound/soc/codecs/cs42l56.c:206:30: warning:
adc_swap_enum defined but not used [-Wunused-const-variable=]
It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815092436.34632-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It seems 'es8328_rline_enum' should be used
in es8328_right_line_controls
Fixes: 567e4f98922c ("ASoC: add es8328 codec driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815092300.68712-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sound/soc/codecs/es8328.c:102:35: warning:
pga_tlv defined but not used [-Wunused-const-variable=]
They are never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815092056.28724-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sound/soc/codecs/tlv320aic31xx.c:261:29: warning:
cm_m_enum defined but not used [-Wunused-const-variable=]
It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815091738.21680-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sound/soc/codecs/tlv320aic23.c:70:29: warning:
tlv320aic23_rec_src defined but not used [-Wunused-const-variable=]
It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815091534.57780-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sound/soc/codecs/rt1011.c:981:35: warning:
dac_vol_tlv defined but not used [-Wunused-const-variable=]
sound/soc/codecs/rt1011.c:982:35: warning:
adc_vol_tlv defined but not used [-Wunused-const-variable=]
They are never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815090602.9000-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sound/soc/codecs/max98371.c:157:35: warning:
max98371_noload_gain_tlv defined but not used [-Wunused-const-variable=]
It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815090404.72752-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sound/soc/codecs/cs4349.c:358:32: warning:
cs4349_runtime_pm defined but not used [-Wunused-const-variable=]
cs4349_runtime_pm ops already defined, it seems
we should enable it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e40da86 ("ASoC: cs4349: Add support for Cirrus Logic CS4349")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815090157.70036-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sound/soc/codecs/cs42l73.c:276:38: warning:
vsp_output_mux defined but not used [-Wunused-const-variable=]
sound/soc/codecs/cs42l73.c:279:38: warning:
xsp_output_mux defined but not used [-Wunused-const-variable=]
They are never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815085454.30384-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Instead of using two additional "%s" specifiers, put the constant string
literals directly to the format specifier.
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190621113116.47525-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Most dmics produce a high level when they receive clock. The difference
between power-on and memory record time is about 10ms, but the dmic
needs 50ms to output normal data.
This commit add 100ms delay after SoC output clock so that we can cut
off the pop noise at the beginning.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Link: https://lore.kernel.org/r/1564980997-11359-1-git-send-email-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c:50:1: warning:
mt8183_mt6358_ts3a227_max98357_dapm_widgets defined but not used [-Wunused-const-variable=]
sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c:55:1: warning:
mt8183_mt6358_ts3a227_max98357_dapm_routes defined but not used [-Wunused-const-variable=]
They are never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190813144122.67676-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c:120:1: warning:
mt8183_da7219_max98357_dapm_widgets defined but not used [-Wunused-const-variable=]
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c:124:40: warning:
mt8183_da7219_max98357_dapm_routes defined but not used [-Wunused-const-variable=]
They are never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190813143952.29232-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:799:38: warning:
mt2701_afe_o23_mix defined but not used [-Wunused-const-variable=]
sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:803:38: warning:
mt2701_afe_o24_mix defined but not used [-Wunused-const-variable=]
sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:835:38: warning:
mt2701_afe_multi_ch_out_i2s4 defined but not used [-Wunused-const-variable=]
They are never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190813143811.31456-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If CONFIG_DMI is not set, gcc warns:
sound/soc/soc-core.c:81:27: warning:
dmi_blacklist defined but not used [-Wunused-const-variable=]
Add #ifdef guard around it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190813142501.13080-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
