summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-01-05xgmac: cleanupsstephen hemminger
Make local function static, make ethtool_ops const. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05net: make ethtool_ops conststephen hemminger
Auditing all usage of ethtool_ops found several drivers that are not declaring the struct const when it should be. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05vmxnet3" make ethtool ops conststephen hemminger
All tables of function pointers should be const to make hacks more difficult. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05xen-netback: make ops structs conststephen hemminger
All tables of function pointers should be const to make hacks more difficult. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05virtio_net: Pass gfp flags when allocating rx buffers.Mike Waychison
Currently, the refill path for RX buffers will always allocate the buffers as GFP_ATOMIC, even if we are in process context. This will fail to apply memory pressure as the worker thread will not contribute to the freeing of memory. Fix this by changing add_recvbuf_small to use the gfp variant allocator, __netdev_alloc_skb_ip_align(). Signed-off-by: Mike Waychison <mikew@google.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05ixgbe: FCoE: Add support for ndo_get_fcoe_hbainfo() callNeerav Parikh
This patch implements support for ndo_get_fcoe_hbainfo() call in the ixgbe driver. This function will be called by the FCoE protocol stack to obtain device specific information from the underlying device configured to do FCoE. Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05netdev: FCoE: Add new ndo_get_fcoe_hbainfo() callNeerav Parikh
This adds a new ndo_get_fcoe_hbainfo() call in net_device_ops for FCoE protocol stack. If supported by the underlying device, the FCoE protocol stack will call this to get device specific information from the underlying device. This information will then be utilized by the FCoE protocol stack to register Fiber Channel HBA attributes with the Fiber Channel Management Service via Fabric Device Management Interface (FDMI) as per the T11 FC-GS specification. Changes in v2: - As per comments from David Miller aligning the parameters of the ndo_get_fcoe_hbainfo() Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05igb: reset PHY after recovering from PHY power downKoki Sanagi
According to 82576_Datasheet.pdf, PHY setting is lost after PHY power down. So resetting PHY is needed when recovering from PHY power down to set a default setting to PHY register. Owing to this lack, NIC doesn't link up in some rare situation. Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05igb: add basic runtime PM supportYan, Zheng
Use the runtime power management framework to add basic runtime PM support to the igb driver. Namely, make the driver suspend the device when the link is off and set it up for generating a wakeup event after the link has been detected again. This feature is disabled by default. Based on e1000e's runtime PM code. Changes since v1: Don't suspend the device when shutting down the interface. Avoid race between runtime suspending and ethtool operations. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05igb: Add support for byte queue limits.Eric Dumazet
This adds support for byte queue limits (BQL) Since this driver collects bytes count in 'bytecount' field, use it also in igb_tx_map() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05e1000: cleanup CE4100 MDIO registers accessFlorian Fainelli
A global variable is currently used to hold the virtual address of the CE4100 MDIO base register address. Store the address in the e1000_hw structure and update macros accordingly. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05e1000: unmap ce4100_gbe_mdio_base_virt in e1000_removeFlorian Fainelli
We are not unmapping ce4100_gbe_mdio_base_virt in exit path in case we are running on a CE4100 adapter, fix that. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05e1000: fix lockdep splat in shutdown handlerJesse Brandeburg
As reported by Steven Rostedt, e1000 has a lockdep splat added during the recent merge window. The issue is that cancel_delayed_work is called while holding our private mutex. There is no reason that I can see to hold the mutex during pci shutdown, it was more just paranoia that I put the mutex_lock around the call to e1000_down. In a quick survey lots of drivers handle locking differently when being called by the pci layer. The assumption here is that we don't need the mutexes' protection in this function because the driver could not be unloaded while in the shutdown handler which is only called at reboot or poweroff. Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/b43legacy/dma.c
2012-01-05ath6kl: revert USB supportJohn W. Linville
The ath6kl driver is causing build failures when the ath6kl bits are not built as modules. A better fix is forthcoming in a future release, but for now lets revert the problematic code. This reverts the following commits: fde57764ef8751b9aca11b6f6221ac5555bda699 d70385a26ad9a122a5450d066550470107b6bc38 59d954dda4b9b3f3e61d4b87a2b26952b8c4c09d Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-01-04mwl8k: Changing the driver version to 0.13Yogesh Ashok Powar
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04Linux 3.2Linus Torvalds
2012-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: fix CAN MAINTAINERS SCM tree type mwifiex: fix crash during simultaneous scan and connect b43: fix regression in PIO case ath9k: Fix kernel panic in AR2427 in AP mode CAN MAINTAINERS update net: fsl: fec: fix build for mx23-only kernel sch_qfq: fix overflow in qfq_update_start() Revert "Bluetooth: Increase HCI reset timeout in hci_dev_do_close"
2012-01-04minixfs: misplaced checks lead to dentry leakAl Viro
bitmap size sanity checks should be done *before* allocating ->s_root; there their cleanup on failure would be correct. As it is, we do iput() on root inode, but leak the root dentry... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-04ptrace: ensure JOBCTL_STOP_SIGMASK is not zero after detachOleg Nesterov
This is the temporary simple fix for 3.2, we need more changes in this area. 1. do_signal_stop() assumes that the running untraced thread in the stopped thread group is not possible. This was our goal but it is not yet achieved: a stopped-but-resumed tracee can clone the running thread which can initiate another group-stop. Remove WARN_ON_ONCE(!current->ptrace). 2. A new thread always starts with ->jobctl = 0. If it is auto-attached and this group is stopped, __ptrace_unlink() sets JOBCTL_STOP_PENDING but JOBCTL_STOP_SIGMASK part is zero, this triggers WANR_ON(!signr) in do_jobctl_trap() if another debugger attaches. Change __ptrace_unlink() to set the artificial SIGSTOP for report. Alternatively we could change ptrace_init_task() to copy signr from current, but this means we can copy it for no reason and hide the possible similar problems. Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@kernel.org> [3.1] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-04ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE raceOleg Nesterov
Test-case: int main(void) { int pid, status; pid = fork(); if (!pid) { for (;;) { if (!fork()) return 0; if (waitpid(-1, &status, 0) < 0) { printf("ERR!! wait: %m\n"); return 0; } } } assert(ptrace(PTRACE_ATTACH, pid, 0,0) == 0); assert(waitpid(-1, NULL, 0) == pid); assert(ptrace(PTRACE_SETOPTIONS, pid, 0, PTRACE_O_TRACEFORK) == 0); do { ptrace(PTRACE_CONT, pid, 0, 0); pid = waitpid(-1, NULL, 0); } while (pid > 0); return 1; } It fails because ->real_parent sees its child in EXIT_DEAD state while the tracer is going to change the state back to EXIT_ZOMBIE in wait_task_zombie(). The offending commit is 823b018e which moved the EXIT_DEAD check, but in fact we should not blame it. The original code was not correct as well because it didn't take ptrace_reparented() into account and because we can't really trust ->ptrace. This patch adds the additional check to close this particular race but it doesn't solve the whole problem. We simply can't rely on ->ptrace in this case, it can be cleared if the tracer is multithreaded by the exiting ->parent. I think we should kill EXIT_DEAD altogether, we should always remove the soon-to-be-reaped child from ->children or at least we should never do the DEAD->ZOMBIE transition. But this is too complex for 3.2. Reported-and-tested-by: Denys Vlasenko <vda.linux@googlemail.com> Tested-by: Lukasz Michalik <lmi@ift.uni.wroc.pl> Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@kernel.org> [3.0+] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-04Merge git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
* git://git.samba.org/sfrench/cifs-2.6: [CIFS] default ntlmv2 for cifs mount delayed to 3.3 cifs: fix bad buffer length check in coalesce_t2
2012-01-04ipv6/addrconf: speedup /proc/net/if_inet6 fillingMihai Maruseac
This ensures a linear behaviour when filling /proc/net/if_inet6 thus making ifconfig run really fast on IPv6 only addresses. In fact, with this patch and the IPv4 one sent a while ago, ifconfig will run in linear time regardless of address type. IPv4 related patch: f04565ddf52e401880f8ba51de0dff8ba51c99fd dev: use name hash for dev_seq_ops ... Some statistics (running ifconfig > /dev/null on a different setup): iface count / IPv6 no-patch time / IPv6 patched time / IPv4 time ---------------------------------------------------------------- 6250 | 0.23 s | 0.13 s | 0.11 s 12500 | 0.62 s | 0.28 s | 0.22 s 25000 | 2.91 s | 0.57 s | 0.46 s 50000 | 11.37 s | 1.21 s | 0.94 s 128000 | 86.78 s | 3.05 s | 2.54 s Signed-off-by: Mihai Maruseac <mmaruseac@ixiacom.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04r6040: place comments before codeFlorian Fainelli
checkpatch.pl complained about the line exceding 80 columns, and the comment was actually on the same line as the code, fix that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04r6040: use __aligned(size)Florian Fainelli
instead of __attribute__((__aligned(size)__)) Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04r6040: use definitions for MAC_SM register read/writesFlorian Fainelli
Bit 1 is the reset bit of the MAC status machine register, define and use it. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04r6040: use MAC_RST bit definition with MCR1 read/writesFlorian Fainelli
MAC_RST bit is already defined, use it instead of 0x1 where applicable. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04r6040: define more MCR0 register bitsFlorian Fainelli
Define more MCR0-register bits and use them in place of the bits values. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04r6040: remove unused variables and definitionsFlorian Fainelli
Since the conversion to phylib (3831861b: r6040: implement phylib) some PHY-related variables and definitions are now useless, remove them. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04r6040: use an unique MDIO bus nameFlorian Fainelli
We should use an unique MDIO bus name which does not clash with anything else in the system like the Fixed MDIO bus. The bus is now named: r6040-<card number> which is unique in the system. Reported-by: Vladimir Kolpakov <vova.kolpakov@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04ipv6: Check RA for sllao when configuring optimistic ipv6 address (v2)Neil Horman
Recently Dave noticed that a test we did in ipv6_add_addr to see if we next hop route for the interface we're adding an addres to was wrong (see commit 7ffbcecbeed91e5874e9a1cfc4c0cbb07dac3069). for one, it never triggers, and two, it was completely wrong to begin with. This test was meant to cover this section of RFC 4429: 3.3 Modifications to RFC 2462 Stateless Address Autoconfiguration * (modifies section 5.5) A host MAY choose to configure a new address as an Optimistic Address. A host that does not know the SLLAO of its router SHOULD NOT configure a new address as Optimistic. A router SHOULD NOT configure an Optimistic Address. This patch should bring us into proper compliance with the above clause. Since we only add a SLAAC address after we've received a RA which may or may not contain a source link layer address option, we can pass a pointer to that option to addrconf_prefix_rcv (which may be null if the option is not present), and only set the optimistic flag if the option was found in the RA. Change notes: (v2) modified the new parameter to addrconf_prefix_rcv to be a bool rather than a pointer to make its use more clear as per request from davem. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04mac80211: remove dead codeMohammed Shafi Shajakhan
ieee80211_offchannel_enable_all_ps function is no longer used and looks like its logic is extensively handled in ieee80211_offchannel_stop_vifs Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04mwl8k: Recover from firmware crashYogesh Ashok Powar
In case of firmware crash, reload the firmware and reconfigure it by triggering ieee80211_hw_restart; mac80211 utility function. V2 Addressed following comments from Lennert: - Stop the queues during reload - Removed atomic_t declaration for hw_restart - Extend the firmware reload support for sta firmware as well - Other misc changes Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04mac80211: Call driver commands after drv_start in mac80211 restart codeYogesh Ashok Powar
Ideally, hardware/firmware initialization is complete after the drv_start routine. In mac80211 restart code (ieee80211_reconfig), defer calling the driver commands i.e. setup fragmentation threshold, rts threshold and coverage class till drv_start routine is called. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> v2: Removed extra blank line added. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04ath9k: tx queue enable is read only for EDMA chipsetsMohammed Shafi Shajakhan
for EDMA chip AR_Q_TXE (tx enable for each queue) is read only Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04rt2x00: Change RF3853 to RF3053.Gertjan van Wingerde
According to the latest Ralink vendor drivers, this seems to be the real RF chipset type. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04rt2x00: RT3593 is also applicable to USB.Gertjan van Wingerde
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04rt2x00usb: Zero USB padding before sending URBJakub Kiciński
When USB driver requires padding at the end of frame or URB it will report this need by increasing return value of get_tx_data_len callback. Common USB code uses that return value as desired URB length. Ensure that appropriate part of skb's tailroom exists and is zeroed. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> -- drivers/net/wireless/rt2x00/rt2x00usb.c | 16 +++++++++++++--- 1 files changed, 13 insertions(+), 3 deletions(-) Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04rt2800usb: Let rt2x00usb handle USB paddingJakub Kiciński
Older USB drivers does not append end padding to skb but instead report it in size of data to be transmitted to HW. rt2800usb should follow that behaviour. Custom write_tx_data callback which was adding pad to skb is not be needed any more. Thanks to this patch frames handed back from rt2800usb to mac80211 will no longer contain end padding. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04rt2x00: Convert big if-statements to switch-statements.Gertjan van Wingerde
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04rt2x00: Whitespace cleanup.Gertjan van Wingerde
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04rt2x00: Identify rt2800usb chipsets.Gertjan van Wingerde
According to the latest USB ID database these are all RT2770 / RT2870 / RT307x devices. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04carl9170: move checksum and txseq into subfunctionsChristian Lamparter
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04rt2800usb: Move ID out of unknownLarry Finger
Testing on the openSUSE wireless forum has shown that a Linksys WUSB54GC v3 with USB ID 1737:0077 works with rt2800usb when the ID is written to /sys/.../new_id. This ID can therefore be moved out of UNKNOWN. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04mac80211: use RCU read locks for sta_info_getMohammed Shafi Shajakhan
this is being recently introduced by the commit a85e1d55974646a442d95911e3f7d7a891ea9ac5 Cc: Paul Stewart <pstew@google.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04ipw2x00: remove reset_port functionalityStanislav Yakovlev
Removes reset_port since it isn't used anywhere as suggested by Johannes Berg. Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04mac80211: fix kernel panic in IBSS due to a regressionMohammed Shafi Shajakhan
kernel panic occurs when we create an IBSS mode and leave it for sometime without any joiner and this is introduced by the commit ec2b774e7c91094d8c00de579646f1162b87b01e where we don't put proper braces for 'list_for_each_entry_safe' and we pass an invalid 'sta' pointer to __sta_info_destroy EIP is at __list_add+0xe/0xa0 EAX: f3b63db4 EBX: 00000000 ECX: eab88c1c EDX: 00000000 ESI: 00000000 EDI: 00000246 EBP: f3b63d80 ESP: f3b63d58 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process kworker/u:2 (pid: 198, ti=f3b62000 task=f3afbea0 task.ti=f3b62000) Stack: 00000000 00000000 f9ef9821 00000000 00000000 eab88c30 f3b63d80 c017f623 eab88bf0 eab88bf0 f3b63dd0 c066f925 00000000 00000002 00000000 f9ef9821 f3b63da0 c0180a2b eab88c1c eab88c30 00000002 f3afbea0 eab88bf4 f3b63db4 Call Trace: [<f9ef9821>] ? __ieee80211_stop_tx_ba_session+0x31/0x60 [mac80211] [<c017f623>] ? debug_mutex_add_waiter+0x23/0x60 [<c066f925>] __mutex_lock_common+0xd5/0x390 [<f9ef9821>] ? __ieee80211_stop_tx_ba_session+0x31/0x60 [mac80211] [<c0180a2b>] ? trace_hardirqs_off+0xb/0x10 [<c066fd37>] mutex_lock_nested+0x47/0x60 [<f9ef9821>] ? __ieee80211_stop_tx_ba_session+0x31/0x60 [mac80211] [<f9ef9821>] __ieee80211_stop_tx_ba_session+0x31/0x60 [mac80211] [<f9ef8989>] ieee80211_sta_tear_down_BA_sessions+0x39/0x60 [mac80211] [<f9ef1a67>] __sta_info_destroy+0x57/0x780 [mac80211] [<f9ef2223>] ieee80211_sta_expire+0x93/0xb0 [mac80211] [<f9efc8f6>] ieee80211_ibss_work+0x2d6/0x530 [mac80211] Cc: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04mac80211: fix scan state machineMohammed Shafi Shajakhan
when we run high bandwidth UDP traffic and we trigger a scan, the scan state machine seems to be looping in SUSPEND->RESUME->DECISION->SUSPEND and SET_CHANNEL seems to be never called as 'tx_empty' is never true while running UDP traffic. fix this by settting SET_CHANNEL state when we get into RESUME state. Cc: Leela Kella <leela@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04net/rfkill/rfkill-gpio.c: introduce missing kfreeJulia Lawall
Error handling code following a kmalloc should free the allocated data. The label fail_alloc already does this for rfkill. A simplified version of the semantic match that finds the problem is as follows: (http://coccinelle.lip6.fr) // <smpl> @r exists@ local idexpression x; statement S; identifier f1; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } x->f1 ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-01 07:48:53 +0000