summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-28xo15-ebook: Remove device.wakeup_countMatthew Garrett
This is handled automatically now. Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28ips: use interruptible waits in ips-monitorJesse Barnes
This is what I intended to do since: 1) the driver handles variable waits just fine, and 2) interruptible waits aren't reported as load in the load avg. Reported-and-tested-by: Andreas Hartmann <andihartmann@freenet.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28acer-wmi: does not poll device status when WMI event is availableLee, Chun-Yi
Acer WMI hotkey event's result include current device status, just need sync the status to killswitch after acer-wmi driver receive hotkey event but not always poll device status. This is good for performance. But, if use EC raw mode, Acer BIOS will not emit wmi event and leave EC to control device status. So, still startup polling job when doesn't detect WMI event GUID or user choice to use ec_raw_mode. Tested on Acer TravelMate 8572 notebook. Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Lee, Chun-Yi <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28acer-wmi: does not set persistence state by rfkill_init_sw_stateLee, Chun-Yi
Acer BIOS keeps devices state when system reboot, but reset to default device states (Wlan on, Bluetooth off, wwan on) if system cold boot. That means BIOS's initial state is not always real persistence. So, removed rfkill_init_sw_state because it sets initial state to persistence then replicate to other new killswitch when rfkill-input enabled. After removed it, acer-wmi set initial soft-block state after rfkill register, and doesn't allow set_block until rfkill initial finished. Reference: bko#31002 https://bugzilla.kernel.org/show_bug.cgi?id=31002 Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Oldřich Jedlička <oldium.pro@seznam.cz> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Lee, Chun-Yi <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28platform-drivers: x86: fix common misspellingsLucas De Marchi
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28acer-wmi: use pr_<level> for messagesLee, Chun-Yi
acer-wmi: use pr_<level> for messages Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Lee, Chun-Yi <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-wmi: potential NULL dereference in show_call()Dan Carpenter
In the earlier check we assumed that "obj" could be NULL. I looked at some of the other places that call evaluate_object() and they check for NULL as well. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-wmi: signedness bug in read_brightness()Dan Carpenter
"err" needs to be signed for the error handling to work. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28platform-driver-x86: samsung-laptop: make dmi_check_cb to return 1 instead of 0Axel Lin
dmi_check_system() walks the table running matching functions until someone returns non zero or we hit the end. This patch makes dmi_check_cb to return 1 so dmi_check_system() return immediately when a match is found. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28platform-driver-x86: fix wrong merge for compal-laptop.cAxel Lin
I found the commit 80183a4b "compal-laptop/fujitsu-laptop/msi-laptop: make dmi_check_cb to return 1 instead of 0" has wrong patch merge. The original patch change the return value for dmi_check_cb(): https://lkml.org/lkml/2010/7/2/88 But commit 80183a4b changed the return value for set_backlight_level. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28msi-laptop: use pr_<level> for messagesJoey Lee
msi-laptop: use pr_<level> for messages Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Lee, Chun-Yi <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28Platform: add Samsung Laptop platform driverGreg Kroah-Hartman
This adds the samsung-laptop driver to the kernel. It now supports all known Samsung laptops that use the SABI interface. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28acer-wmi: Fix WMI IDPali Rohár
This patch change WMI ID to upper characters. With this patch module acer-wmi is automatically loaded when WMI ID is detected. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28acer-wmi: deactive mail led when power offPali Rohár
This patch deactive mail led when laptop is going to hibernete/suspend or power off. After resume from hibernate/suspend correctly restore mail led state. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28msi-laptop: send out touchpad on/off keyLee, Chun-Yi
MSI BIOS's raw behavior is send out KEY_TOUCHPAD_TOGGLE key when user pressed touchpad hotkey. Actually, we can capture the real touchpad status by read 0xE4 EC address on MSI netbook/notebook. So, add msi-laptop input device for send out KEY_TOUCHPAD_ON or KEY_TOUCHPAD_OFF key when user pressed Fn+F3 touchpad hotkey. It leave userland applications to know the real touchpad status. Tested on MSI netbook U-100, U-115, U160(N051), U160DX, N014, N034 Tested on MSI notebook CR620 Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Lee, Chun-Yi <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28acer-wmi: set the touchpad toggle key code to KEY_TOUCHPAD_TOGGLELee, Chun-Yi
Set the touchpad toggle key code from F22 to KEY_TOUCHPAD_TOGGLE, and userspace should use udev's key re-mapping facilities while X is unable to process keycodes above 255 to adjust to the keycode. Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Lee, Chun-Yi <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28platform-driver-x86: intel_mid_thermal: fix unterminated platform_device_id ↵Axel Lin
table The platform_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28sony-laptop: potential null dereferenceDan Carpenter
In the original code, if "device_enum" was NULL then it would dereference it when it printed the error message. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28sony-laptop: handle allocation failuresDan Carpenter
Return -ENOMEM if kzalloc() fails. The callers already handle error returns. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28sony-laptop: return negative on failure in sony_nc_add()Dan Carpenter
There were two places in sony_nc_add() where we returned zero on failure instead of a negative error code. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28sony-laptop: make a couple variables staticDan Carpenter
Sparse complains that these variables should be static. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: set the touchpad toggle key code to KEY_TOUCHPAD_TOGGLEKeng-Yu Lin
Signed-off-by: Keng-Yu Lin <keng-yu.lin@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28ideapad: read brightness setting on brightness key notifyIke Panhc
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=25922 On ideapad Y530, the brightness key notify will be blocked if the last notify is not responsed by getting the brightness value. Read value when we get the notify shall fix the problem and will not have any difference on other ideapads. Signed-off-by: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: kconfig changes to fix build errorsRandy Dunlap
Fix eeepc-wmi build when CONFIG_HOTPLUG_PCI is not enabled: eeepc-wmi.c:(.text+0x3bc5e9): undefined reference to `pci_hp_deregister' eeepc-wmi.c:(.text+0x3bcca4): undefined reference to `__pci_hp_register' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: restore KEY_CAMERA_* keys lost in 190ca27Corentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-wmi: add hwmon interface and pwm1Corentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-wmi: add some common device ids and method idsCorentin Chary
I also found some leds ids (0x00020011-0x00020016 and 0x00040015), but since they are not really present on the notebook, I can't guess their name . Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-nb-wmi: Asus Notebooks WMI DriverCorentin Chary
Introduce a new driver for Asus Notebooks shipped with a WMI device instead of the old ACPI device. The WMI device is almost the same as the one present in Eee PC, but the event guid and the keymap are different. The keymap comes from asus-laptop module. On Asus notebooks, when you call the WMI device, you always need a 64bit buffer, even if you only want to get the state of a device (tested on a G73). Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-wmi: allow debugfs interface to call arbitrary methodCorentin Chary
Also add some # format flags to debugfs output. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-wmi: add calls to INIT, SPEC and SFUN on initCorentin Chary
INIT() call is needed to enable hotkeys on G73 SPEC() and SFUN() allow us to know more about available features. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-wmi: fix and clean backlight codeCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-wmi: try to guess the right DSTS methodsCorentin Chary
This is tricky, new WMI aware notebooks seems to use 0x53545344 while Eee PCs are using 0x53544344. But there is no way to know if there is an Eee PC in that wild that is using 0x53545344 or a notebook using 0x53544344. So the driver try to guess the available DSTS method ... But most Eee PCs never return 0xFFFFFFFE when a method is not available, they return 0 instead (and that's useless). So, first, try 0x53544344 then 0x53545344. We will find a better way when we got more data. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-wmi: factorise wmi_evaluate_method callCorentin Chary
This patch create a single function to call the WMI methods. This function handle inexistent methods (when implemented by the WMI devices, and this is not the case on Eee PCs), ACPI errors, etc.. Also pack struct bios_arg, and make sure that we always send a 64bit buffer when calling a WMI method, because this is needed on Asus notebooks. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-wmi: handle "unknown status" bitCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-wmi: introduce struct asus_rfkillCorentin Chary
First, this allow use to remove the custom asusrfkill_wlan_query, but this will also allow us to give struct asus_wmi * to get_devstate/set_devstate later. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-wmi: minor cleanupsCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: asus generic asus-wmi.ko moduleCorentin Chary
New Asus notebooks are using a WMI device similar to the one used in Eee PCs. Since we don't want to load eeepc-wmi module on Asus notebooks, and we want to keep the eeepc-wmi module for backward compatibility, this patch introduce a new module, named asus-wmi, that will be used by eeepc-wmi and the new Asus Notebook WMI Driver. eeepc-wmi's input device strings (device name and phys) are kept, but rfkill and led names are changed (s/eeepc/asus/). This should not break anything since rfkill are used by type or index, not by name, and the eeepc::touchpad led wasn't working correctly before 2.6.39 anyway. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-wmi: move generic code to asus-wmiCorentin Chary
New Asus notebooks are using a WMI device similar to the one used in Eee PCs. Since we don't want to load a module named eeepc-laptop on Asus Notebooks, start by copying all the code to asus-wmi.c. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28medfield: Add Thermal DriverDurgadoss R
This is the basic thermal sensor driver for Intel MID platform using the Medfield chipset. It plugs in via the thermal drivers and provides sensor readings for the device sensors. Signed-off-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28hp-wmi: add rfkill support for wireless query 0x1bAnssi Hannula
Some recent HP laptops use a new wireless query command type 0x1b. Add support for it. Tested on HP Mini 5102. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28hp-wmi: make rfkill initialization failure non-fatalAnssi Hannula
hp_wmi_rfkill_setup cleans up after itself now, so failing completely is no longer necessary. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28hp-wmi: clear rfkill device pointers when appropriateAnssi Hannula
NULLify rfkill pointers during initialization. This prevents dereference of invalid pointer in case the driver is rebound and some rfkill device isn't detected anymore. Clear them also in hp_wmi_rfkill_setup failure path so that an rfkill initialization failure doesn't need to be fatal for the whole driver. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28hp-wmi: split rfkill initialization out of hp_wmi_bios_setupAnssi Hannula
Split initialization of rfkill devices from hp_wmi_bios_setup() to hp_wmi_rfkill_setup(). This makes the code somewhat cleaner, especially with the future command 0x1b rfkill support. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28hp-wmi: allow setting input and output buffer sizes separatelyAnssi Hannula
Split buffersize parameter of hp_wmi_perform_query to insize and outsize. Existing callers are changed to use the same value for insize and outsize to avoid any regressions, with the exception of hp_wmi_set_block where the output buffer is unused and therefore outsize is set to 0 (this change is not seen by BIOS code). The maximum input buffer size is kept at 4 bytes as per struct bios_args. Some commands exist that take longer buffers, but they haven't been implemented. The data portion of bios_args can be trivially made dynamically allocated later when such larger buffers become needed. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28hp-wmi: remove a variable that is never readAnssi Hannula
Remove the status variable from hp_wmi_perform_query which holds the return value from wmi_evaluate_method(). It is never checked as the function bails out if the output buffer hasn't been allocated which indicates the call failed. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28hp-wmi: check query return value in hp_wmi_perform_queryAnssi Hannula
Check BIOS provided return value code in hp_wmi_perform_query and print a warning on error. Printing is suppressed for HPWMI_RET_UNKNOWN_CMDTYPE which is returned when the command type is unsupported. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28sony-laptop: implement new backlight control methodMattia Dongili
Reasonably recent Vaios have a 0x12f or 0x137 handler that exposes a fine lid backlight regulation with values ranging from 0 to 255. The patch is based on findings and code from Javier Achirica <achirica@gmail.com> and Marco Chiappero <marco@absence.it> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28sony-laptop: implement keyboard backlight supportMattia Dongili
Recent Vaios have the opportunity to control the keyboard backlight via ACPI calls to the SNC device. Introduce two module parameters to control how keyboard backlight should be set at module loading (default to on and with 10 seconds timeout). Tested-by: Marco Chiappero <marco@absence.it> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28sony-laptop: cache handles and report them via sysfsMattia Dongili
Avoid calling into acpi each time we need to lookup a method handle and report the available handles to ease collection of information when debugging issues. Also move initialization of the platform driver earlier to allow adding files from other setup functions. Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28sony-laptop: remove unused Type4 defineMattia Dongili
Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <mjg@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 13:34:57 +0000