summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-22[media] s5p-fimc: Allow defining number of sensors at runtimeSylwester Nawrocki
Add num_clients field to struct s5p_fimc_isp_info to define exactly size of clients array which simplifies a bit the sensors management. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] s5p-fimc: Prevent hanging on device close and fix the lockingSylwester Nawrocki
Rework the locking in m2m driver to assure proper operation on SMP systems. When job_abort or stop_streaming was called to immediately shutdown a memory-to-memory transaction video buffers scheduled for processing were never returned to vb2 and v4l2_m2m_job_finish was not called which led to hanging. Correct this and also return the unprocessed buffers to vb2 marking them as erroneous, in case the end of frame interrupt do not occur. Reported-by: Sewoon Park <seuni.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] s5p-fimc: Prevent oops when i2c adapter is not availableSylwester Nawrocki
Prevent invalid pointer dereference on error path. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] s5p-fimc: fix ISR and buffer handling for fimc-captureSungchun Kang
In some cases fimc H/W did not stop although there were no output buffers available. So the capture deactivation interrupt routine is modified and the state of ST_CAPT_RUN is cleared only in the LAST-IRQ call. After LAST-IRQ is generated, H/W pointer will be skipped by 1 frame. (reference by user manual) So, S/W pointer should be increased too. Reviewed-by Jonghun Han <jonghun.han@samsung.com> Signed-off-by: Sungchun Kang <sungchun.kang@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] Force xc5000 firmware loading for NetUP Dual DVB-T/C CI RF cardAbylay Ospan
Two xc5000 tuners connected to same i2c bus. Experiments shows that situation when one tuner is not initialized while other is tuned to channel causes TS errors. Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] Fix CI code for NetUP Dual DVB-T/C CI RF cardAbylay Ospan
CI reset takes several seconds on some CAM, so there is no need to lock mutex all that time. Also we need not to preserve CI's reset bits in CIBUSCTRL register, they are handled automatically by FPGA. Set it to 0 explicitly in order to not reset wrong CAM. Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] stv0367: implement uncorrected blocks counterAbylay Ospan
Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] stv0367: change default value for AGC registerAbylay Ospan
Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] cx23885: Altera FPGA CI interface reworkedAbylay Ospan
It decreases I2C traffic. Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] cpia2: Fix some gcc 4.6 warnings when debug is disabledMauro Carvalho Chehab
cpia2_core.c:529:14: warning: variable 'dir' set but not used [-Wunused-but-set-variable] cpia2_core.c:526:5: warning: variable 'block_index' set but not used [-Wunused-but-set-variable] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] several drivers: Fix a few gcc 4.6 warningsMauro Carvalho Chehab
au0828-dvb.c:99:6: warning: variable 'ptr' set but not used [-Wunused-but-set-variable] au0828-video.c:1180:25: warning: variable 'maxheight' set but not used [-Wunused-but-set-variable] au0828-video.c:1180:15: warning: variable 'maxwidth' set but not used [-Wunused-but-set-variable] bttv-input.c:196:16: warning: variable 'current_jiffies' set but not used [-Wunused-but-set-variable] Those variables are not used at all, so just remove them. Cc: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] altera-ci.h: add missing inlineHans Verkuil
Functions defined in a header should be static inline. This prevents compile warnings like: 'altera_ci_tuner_reset' defined but not used (Actually appeared in the media backwards compatibility build). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] cx88-alsa: fix compiler warningHans Verkuil
drivers/media/video/cx88/cx88-alsa.c: In function 'cx88_audio_initdev': drivers/media/video/cx88/cx88-alsa.c:881:20: warning: 'core' may be used uninitialized in this function The compiler doesn't understand that snd_cx88_create fills in the core pointer. So just initialize it to NULL. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] fmdrv_common.c: fix compiler warningHans Verkuil
drivers/media/radio/wl128x/fmdrv_common.c: In function 'recv_tasklet': drivers/media/radio/wl128x/fmdrv_common.c:274:4: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int' The result of sizeof() should be printed with %zu. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] altera-ci.c: fix compiler warningsHans Verkuil
drivers/media/video/cx23885/altera-ci.c: In function 'altera_hw_filt_init': drivers/media/video/cx23885/altera-ci.c:671:2: warning: cast from pointer to integer of different size drivers/media/video/cx23885/altera-ci.c: In function 'altera_ci_init': drivers/media/video/cx23885/altera-ci.c:739:2: warning: cast from pointer to integer of different size Use %p instead of 0x%x to print addresses. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] stv0367.c: fix compiler warningHans Verkuil
drivers/media/dvb/frontends/stv0367.c: In function 'stv0367ter_lock_algo': drivers/media/dvb/frontends/stv0367.c:1315:2: warning: cast from pointer to integer of different size Use %p to print addresses instead of 0x%x. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] tuner-xc2028.c: fix compile warningHans Verkuil
drivers/media/common/tuners/tuner-xc2028.c: In function 'generic_set_freq': drivers/media/common/tuners/tuner-xc2028.c:936:15: warning: comparison between 'enum tuner_mode' and 'enum v4l2_tuner_type' Argument type was enum tuner_mode, but should have been enum v4l2_tuner_type. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3isp: Add documentationSakari Ailus
Add documentation on the OMAP 3 ISP driver. Document the subdevs, V4L2 events and private IOCTLs the driver implements Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David Cohen <dacohen@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] media: Pick a free ioctls rangeLaurent Pinchart
Pick an unused range of ioctls in Documentation/ioctl/ioctl-number.txt and use it for the MEDIA_IOC_* ioctls. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3isp: Add set performance callback in isp platform dataLaurent Pinchart
Replace the omap_pm_set_min_bus_tput() with a callback to board code. This makes the omap3isp driver compilable as a module, and lets board code manage OMAP PM details depending on board requirements. Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3isp: Kconfig and MakefileLaurent Pinchart
Add the OMAP3 ISP driver to the kernel build system. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3isp: StatisticsDavid Cohen
The OMAP3 ISP statistics entities compute histogram and H3A statistics information from capture images. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David Cohen <dacohen@gmail.com> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com> Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Antti Koskipaa <akoskipa@gmail.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: RaniSuneela <r-m@ti.com> Signed-off-by: Atanas Filipov <afilipov@mm-sol.com> Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Nayden Kanchev <nkanchev@mm-sol.com> Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Dominic Curran <dcurran@ti.com> Signed-off-by: Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi> Signed-off-by: Pallavi Kulkarni <p-kulkarni@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3isp: CCDC, preview engine and resizerLaurent Pinchart
The OMAP3 ISP CCDC, preview engine and resizer entities perform image processing and scaling. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David Cohen <dacohen@gmail.com> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com> Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Antti Koskipaa <akoskipa@gmail.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: RaniSuneela <r-m@ti.com> Signed-off-by: Atanas Filipov <afilipov@mm-sol.com> Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Nayden Kanchev <nkanchev@mm-sol.com> Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Dominic Curran <dcurran@ti.com> Signed-off-by: Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi> Signed-off-by: Pallavi Kulkarni <p-kulkarni@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3isp: CCP2/CSI2 receiversLaurent Pinchart
The OMAP3 ISP CCP2 and CSI2 receivers provide an interface to connect serial MIPI sensors to the device. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David Cohen <dacohen@gmail.com> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com> Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Antti Koskipaa <akoskipa@gmail.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: RaniSuneela <r-m@ti.com> Signed-off-by: Atanas Filipov <afilipov@mm-sol.com> Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Nayden Kanchev <nkanchev@mm-sol.com> Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Dominic Curran <dcurran@ti.com> Signed-off-by: Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi> Signed-off-by: Pallavi Kulkarni <p-kulkarni@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3isp: Video devices and buffers queueLaurent Pinchart
The OMAP3 ISP video devices and buffers queue modules implement the V4L2 API on all the ISP video nodes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David Cohen <dacohen@gmail.com> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com> Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Antti Koskipaa <akoskipa@gmail.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: RaniSuneela <r-m@ti.com> Signed-off-by: Atanas Filipov <afilipov@mm-sol.com> Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Nayden Kanchev <nkanchev@mm-sol.com> Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Dominic Curran <dcurran@ti.com> Signed-off-by: Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi> Signed-off-by: Pallavi Kulkarni <p-kulkarni@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3isp: OMAP3 ISP coreSakari Ailus
The Image Signal Processor provides the system interface and the processing capability to connect RAW or YUV image-sensor modules to the OMAP3. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David Cohen <dacohen@gmail.com> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com> Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Antti Koskipaa <akoskipa@gmail.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: RaniSuneela <r-m@ti.com> Signed-off-by: Atanas Filipov <afilipov@mm-sol.com> Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Nayden Kanchev <nkanchev@mm-sol.com> Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Dominic Curran <dcurran@ti.com> Signed-off-by: Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi> Signed-off-by: Pallavi Kulkarni <p-kulkarni@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: subdev: Generic ioctl supportLaurent Pinchart
Instead of returning an error when receiving an ioctl call with an unsupported command, forward the call to the subdev core::ioctl handler. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap2: Fix camera resources for multiomapSergio Aguirre
Make sure the kernel can be compiled with both OMAP2 and OMAP3 camera support linked in, and give public symbols proper omap2/omap3 prefixes. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3: Add function to register omap3isp platform device structureLaurent Pinchart
The omap3isp platform device requires platform data. Instead of registering the device in omap2_init_devices(), export an omap3_init_camera() function to fill the device structure with the platform data pointer and register the device. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3: Remove unusued ISP CBUFF resourceSergio Aguirre
The ISP CBUFF module isn't use, its resource isn't needed. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] ARM: OMAP3: Update Camera ISP definitions for OMAP3630Tuukka Toivonen
Add new/changed base address definitions and resources for OMAP3630 ISP. The OMAP3430 CSI2PHY block is same as the OMAP3630 CSIPHY2 block. But the later name is chosen as it gives more symmetry to the names. Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com> Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Add 12 bits bayer pixel formatsLaurent Pinchart
Add FCCs for the following pixel formats: - V4L2_PIX_FMT_SBGGR12 - V4L2_PIX_FMT_SGBRG12 - V4L2_PIX_FMT_SGRBG12 - V4L2_PIX_FMT_SRGGB12 Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Add missing 12 bits bayer media bus formatsLaurent Pinchart
Add codes and documentation for the following media bus formats: - V4L2_MBUS_FMT_SGBRG12_1X12 - V4L2_MBUS_FMT_SGRBG12_1X12 - V4L2_MBUS_FMT_SRGGB12_1X12 Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Add remaining RAW10 patterns w DPCM pixel code variantsLaurent Pinchart
This adds following formats: - V4L2_MBUS_FMT_SRGGB10_1X10 - V4L2_MBUS_FMT_SGBRG10_1X10 - V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8 - V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8 - V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8 Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Add 8-bit YUYV on 16-bit bus and SGRBG10 media bus pixel codesLaurent Pinchart
Add the following media bus format code definitions: - V4L2_MBUS_FMT_SGRBG10_1X10 for 10-bit GRBG Bayer - V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8 for 10-bit DPCM compressed GRBG Bayer - V4L2_MBUS_FMT_YUYV16_1X16 for 8-bit YUYV on 16-bit bus - V4L2_MBUS_FMT_UYVY16_1X16 for 8-bit UYVY on 16-bit bus - V4L2_MBUS_FMT_YVYU16_1X16 for 8-bit YVYU on 16-bit bus - V4L2_MBUS_FMT_VYUY16_1X16 for 8-bit VYUY on 16-bit bus Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Add subdev sensor g_skip_frames operationLaurent Pinchart
Some buggy sensors generate corrupt frames when the stream is started. This new operation return the number of corrupt frames to skip when starting the stream. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: v4l2_subdev userspace crop APIAntti Koskipaa
This patch adds the VIDIOC_SUBDEV_S_CROP and G_CROP ioctls to the userland API. CROPCAP is not implemented because it's redundant. Signed-off-by: Antti Koskipaa <akoskipa@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: v4l2_subdev userspace frame interval APILaurent Pinchart
The three new ioctl VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL, VIDIOC_SUBDEV_G_FRAME_INTERVAL and VIDIOC_SUBDEV_S_FRAME_INTERVAL can be used to enumerate and configure a subdev's frame rate from userspace. Two new video::g/s_frame_interval subdev operations are introduced to support those ioctls. The existing video::g/s_parm operations are deprecated and shouldn't be used anymore. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: v4l2_subdev userspace format APILaurent Pinchart
Add a userspace API to get, set and enumerate the media format on a subdev pad. The format at the output of a subdev usually depends on the format at its input(s). The try format operation is thus not suitable for probing format at individual pads, as it can't modify the device state and thus can't remember the format tried at the input to compute the output format. To fix the problem, pass an extra argument to the get/set format operations to select the 'try' or 'active' format. The try format is used when probing the subdev. Setting the try format must not change the device configuration but can store data for later reuse. Data storage is provided at the file-handle level so applications probing the subdev concurently won't interfere with each other. The active format is used when configuring the subdev. It's identical to the format handled by the usual get/set operations. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: v4l2_subdev userspace format API - documentation binary filesLaurent Pinchart
Add images used by the V4L2 subdev userspace format API documentation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: v4l2_subdev pad-level operationsLaurent Pinchart
Add a v4l2_subdev_pad_ops structure for the operations that need to be performed at the pad level such as format-related operations. Pad format-related operations use v4l2_mbus_framefmt instead of v4l2_format. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: subdev: Add new file operationsLaurent Pinchart
V4L2 sub-devices store pad formats and crop settings in the file handle. To let drivers initialize those settings properly, add an open operation that is called when the subdev is opened as well as a corresponding close operation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Create v4l2 subdev file handle structureStanimir Varbanov
Used for storing subdev information per file handle and hold V4L2 file handle. Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Antti Koskipaa <akoskipa@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Group media bus pixel codes by types and sort them alphabeticallyLaurent Pinchart
Adding new pixel codes at the end of the enumeration will soon create a mess, so group the pixel codes by type and sort them by bus_width, bits per component, samples per pixel and order of subsamples. As the codes are part of the kernel ABI their value can't change when a new code is inserted in the enumeration, so they are given an explicit numerical value. When inserting a new pixel code developers must use and update the next free value. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Rename V4L2_MBUS_FMT_GREY8_1X8 to V4L2_MBUS_FMT_Y8_1X8Laurent Pinchart
For consistency with the V4L2_MBUS_FMT_Y10_1X10 format. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Replace enums with fixed-sized fields in public structureLaurent Pinchart
The v4l2_mbus_framefmt structure will be part of the public userspace API and used (albeit indirectly) as an ioctl argument. As such, its size must be fixed across userspace ABIs. Replace the v4l2_field and v4l2_colorspace enums by __u32 fields and add padding for future enhancements. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Move the media/v4l2-mediabus.h header to include/linuxLaurent Pinchart
The header defines the v4l2_mbus_framefmt structure which will be used by the V4L2 subdevs userspace API. Change the type of the v4l2_mbus_framefmt::code field to __u32, as enum sizes can differ between different ABIs on the same architectures. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Make v4l2_subdev inherit from media_entityLaurent Pinchart
V4L2 subdevices are media entities. As such they need to inherit from (include) the media_entity structure. When registering/unregistering the subdevice, the media entity is automatically registered/unregistered. The entity is acquired on device open and released on device close. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Make video_device inherit from media_entityLaurent Pinchart
V4L2 devices are media entities. As such they need to inherit from (include) the media_entity structure. When registering/unregistering the device, the media entity is automatically registered/unregistered. The entity is acquired on device open and released on device close. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Add a media_device pointer to the v4l2_device structureLaurent Pinchart
The pointer will later be used to register/unregister media entities when registering/unregistering a v4l2_subdev or a video_device. With the introduction of media devices, device drivers need to store a pointer to a driver-specific structure in the device's drvdata. v4l2_device can't claim ownership of the drvdata anymore. To maintain compatibility with drivers that rely on v4l2_device storing a pointer to itself in the device's drvdata, v4l2_device_register() will keep doing so if the drvdata is NULL. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 04:28:35 +0000