summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-07-18media: cec: improve transmit timeout loggingHans Verkuil
Kernel logging messes up the upcoming low-level CEC monitoring support which is very time-sensitive. So change the debug level of this message but keep a counter that is shown in the debugfs status log. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-18media: cec: only increase the seqnr if CEC_TRANSMIT would return 0Hans Verkuil
The transmit code would increase the sequence number first thing, even though CEC_TRANSMIT would return an error due to a malformatted cec_msg struct later on. While valid behavior, this had the disadvantage of producing holes in the sequence list that made debugging harder. Only increase the sequence number when the whole message is validated. When debugging (i.e. with cec-ctl -M) the sequence numbering is now nicely increasing by 1 per message. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-18media: cec: clear all cec_log_addrs fieldsHans Verkuil
The CEC version, vendor ID and OSD name were not cleared when clearing the current set of logical addresses. This was unexpected and somewhat confusing, so reset all these fields to their default values. Also document this since the documentation wasn't quite clear either. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-18media: ov6650: convert to standalone v4l2 subdeviceJanusz Krzysztofik
Remove the soc_camera dependencies and move the diver to i2c Lost features, fortunately not used or not critical on test platform: - soc_camera power on/off callback - replaced with clock enable/disable only, no support for platform provided regulators nor power callback, - soc_camera sense request - replaced with arbitrarily selected default master clock rate and pixel clock limit, no support for platform requested values, - soc_camera board flags - no support for platform requested mbus config tweaks. Tested on Amstrad Delta with now out of tree but still locally maintained omap1_camera host driver. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-18media: svg: avoid too long linesMauro Carvalho Chehab
Sending patches with SVG files via e-mail has a drawback: line size could be bigger than 998, with is the limit given by RFC 5322[1]. So, we need to enforce a lower limit, in order to allow those patches to be properly reviewed. [1] https://tools.ietf.org/html/rfc5322#section-2.1.1 So, use this small Perl script to limit columns size to ~900. use Text::Wrap; $Text::Wrap::columns = 900; $t.=$_ while (<>); print wrap("","",$t); Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-18media: svg files: simplify filesMauro Carvalho Chehab
Debian's ImageMagick is currently unable to decode those images. Use scour to simplify the SVG, and provide only one font type, in order to make it more palatable. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-18media: selection.svg: simplify the SVG fileMauro Carvalho Chehab
This file is too big, with cause it to require a lot of memory when parsed by texlive. Optimize it, in order to avoid the need of touching at main_memory at texmf.cnf. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-17media: vimc: set id_table for platform driversJavier Martinez Canillas
The vimc platform drivers define a platform device ID table but these are not set to the .id_table field in the platform driver structure. So the platform device ID table is only used to fill the aliases in the module but are not used for matching (works because the platform subsystem fallbacks to the driver's name if no .id_table is set). But this also means that the platform device ID table isn't used if the driver is built-in, which leads to the following build warning: This causes the following build warnings when the driver is built-in: drivers/media/platform/vimc//vimc-capture.c:528:40: warning: ‘vimc_cap_driver_ids’ defined but not used [-Wunused-const-variable=] static const struct platform_device_id vimc_cap_driver_ids[] = { ^~~~~~~~~~~~~~~~~~~ drivers/media/platform/vimc//vimc-debayer.c:588:40: warning: ‘vimc_deb_driver_ids’ defined but not used [-Wunused-const-variable=] static const struct platform_device_id vimc_deb_driver_ids[] = { ^~~~~~~~~~~~~~~~~~~ drivers/media/platform/vimc//vimc-scaler.c:442:40: warning: ‘vimc_sca_driver_ids’ defined but not used [-Wunused-const-variable=] static const struct platform_device_id vimc_sca_driver_ids[] = { ^~~~~~~~~~~~~~~~~~~ drivers/media/platform/vimc//vimc-sensor.c:376:40: warning: ‘vimc_sen_driver_ids’ defined but not used [-Wunused-const-variable=] static const struct platform_device_id vimc_sen_driver_ids[] = { ^~~~~~~~~~~~~~~~~~~ Reported-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Suggested-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2017-07-17media: staging: atomisp: disable warnings with cc-disable-warningMauro Carvalho Chehab
Instead of directly using -Wno-foo, use cc-disable-warning, as it checks if the compiler has the warnings we want to disable. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-17media: davinci: variable 'common' set but not usedMauro Carvalho Chehab
Get rid of those two warnings: drivers/media/platform/davinci/vpif_capture.c: In function 'vpif_remove': drivers/media/platform/davinci/vpif_capture.c:1722:21: warning: variable 'common' set but not used [-Wunused-but-set-variable] struct common_obj *common; ^~~~~~ drivers/media/platform/davinci/vpif_display.c: In function 'vpif_remove': drivers/media/platform/davinci/vpif_display.c:1342:21: warning: variable 'common' set but not used [-Wunused-but-set-variable] struct common_obj *common; ^~~~~~ Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-17Merge tag 'v4.13-rc1' into patchworkMauro Carvalho Chehab
Linux v4.13-rc1 * tag 'v4.13-rc1': (11136 commits) Linux v4.13-rc1 random: reorder READ_ONCE() in get_random_uXX random: suppress spammy warnings about unseeded randomness replace incorrect strscpy use in FORTIFY_SOURCE kmod: throttle kmod thread limit kmod: add test driver to stress test the module loader MAINTAINERS: give kmod some maintainer love xtensa: use generic fb.h fault-inject: add /proc/<pid>/fail-nth fault-inject: simplify access check for fail-nth fault-inject: make fail-nth read/write interface symmetric fault-inject: parse as natural 1-based value for fail-nth write interface fault-inject: automatically detect the number base for fail-nth write interface kernel/watchdog.c: use better pr_fmt prefix MAINTAINERS: move the befs tree to kernel.org lib/atomic64_test.c: add a test that atomic64_inc_not_zero() returns an int mm: fix overflow check in expand_upwards() ubifs: Set double hash cookie also for RENAME_EXCHANGE ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrs ubifs: Don't leak kernel memory to the MTD ...
2017-07-15Linux v4.13-rc1Linus Torvalds
2017-07-15Merge tag 'standardize-docs' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation format standardization from Jonathan Corbet: "This series converts a number of top-level documents to the RST format without incorporating them into the Sphinx tree. The hope is to bring some uniformity to kernel documentation and, perhaps more importantly, have our existing docs serve as an example of the desired formatting for those that will be added later. Mauro has gone through and fixed up a lot of top-level documentation files to make them conform to the RST format, but without moving or renaming them in any way. This will help when we incorporate the ones we want to keep into the Sphinx doctree, but the real purpose is to bring a bit of uniformity to our documentation and let the top-level docs serve as examples for those writing new ones" * tag 'standardize-docs' of git://git.lwn.net/linux: (84 commits) docs: kprobes.txt: Fix whitespacing tee.txt: standardize document format cgroup-v2.txt: standardize document format dell_rbu.txt: standardize document format zorro.txt: standardize document format xz.txt: standardize document format xillybus.txt: standardize document format vfio.txt: standardize document format vfio-mediated-device.txt: standardize document format unaligned-memory-access.txt: standardize document format this_cpu_ops.txt: standardize document format svga.txt: standardize document format static-keys.txt: standardize document format smsc_ece1099.txt: standardize document format SM501.txt: standardize document format siphash.txt: standardize document format sgi-ioc4.txt: standardize document format SAK.txt: standardize document format rpmsg.txt: standardize document format robust-futexes.txt: standardize document format ...
2017-07-15Merge tag 'random_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull random updates from Ted Ts'o: "Add wait_for_random_bytes() and get_random_*_wait() functions so that callers can more safely get random bytes if they can block until the CRNG is initialized. Also print a warning if get_random_*() is called before the CRNG is initialized. By default, only one single-line warning will be printed per boot. If CONFIG_WARN_ALL_UNSEEDED_RANDOM is defined, then a warning will be printed for each function which tries to get random bytes before the CRNG is initialized. This can get spammy for certain architecture types, so it is not enabled by default" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: reorder READ_ONCE() in get_random_uXX random: suppress spammy warnings about unseeded randomness random: warn when kernel uses unseeded randomness net/route: use get_random_int for random counter net/neighbor: use get_random_u32 for 32-bit hash random rhashtable: use get_random_u32 for hash_rnd ceph: ensure RNG is seeded before using iscsi: ensure RNG is seeded before use cifs: use get_random_u32 for 32-bit lock random random: add get_random_{bytes,u32,u64,int,long,once}_wait family random: add wait_for_random_bytes() API
2017-07-15Merge branch 'work.mount' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull ->s_options removal from Al Viro: "Preparations for fsmount/fsopen stuff (coming next cycle). Everything gets moved to explicit ->show_options(), killing ->s_options off + some cosmetic bits around fs/namespace.c and friends. Basically, the stuff needed to work with fsmount series with minimum of conflicts with other work. It's not strictly required for this merge window, but it would reduce the PITA during the coming cycle, so it would be nice to have those bits and pieces out of the way" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: isofs: Fix isofs_show_options() VFS: Kill off s_options and helpers orangefs: Implement show_options 9p: Implement show_options isofs: Implement show_options afs: Implement show_options affs: Implement show_options befs: Implement show_options spufs: Implement show_options bpf: Implement show_options ramfs: Implement show_options pstore: Implement show_options omfs: Implement show_options hugetlbfs: Implement show_options VFS: Don't use save/replace_mount_options if not using generic_show_options VFS: Provide empty name qstr VFS: Make get_filesystem() return the affected filesystem VFS: Clean up whitespace in fs/namespace.c and fs/super.c Provide a function to create a NUL-terminated string from unterminated data
2017-07-15Merge branch 'work.__copy_to_user' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more __copy_.._user elimination from Al Viro. * 'work.__copy_to_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: drm_dp_aux_dev: switch to read_iter/write_iter
2017-07-15Merge branch 'work.uaccess-unaligned' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull uacess-unaligned removal from Al Viro: "That stuff had just one user, and an exotic one, at that - binfmt_flat on arm and m68k" * 'work.uaccess-unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kill {__,}{get,put}_user_unaligned() binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail
2017-07-15Merge branch 'misc.compat' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull network field-by-field copy-in updates from Al Viro: "This part of the misc compat queue was held back for review from networking folks and since davem has jus ACKed those..." * 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: get_compat_bpf_fprog(): don't copyin field-by-field get_compat_msghdr(): get rid of field-by-field copyin copy_msghdr_from_user(): get rid of field-by-field copyin
2017-07-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "Boston platform support: - Document DT bindings - Add CLK driver for board clocks CM: - Avoid per-core locking with CM3 & higher - WARN on attempt to lock invalid VP, not BUG CPS: - Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6 - Prevent multi-core with dcache aliasing - Handle cores not powering down more gracefully - Handle spurious VP starts more gracefully DSP: - Add lwx & lhx missaligned access support eBPF: - Add MIPS support along with many supporting change to add the required infrastructure Generic arch code: - Misc sysmips MIPS_ATOMIC_SET fixes - Drop duplicate HAVE_SYSCALL_TRACEPOINTS - Negate error syscall return in trace - Correct forced syscall errors - Traced negative syscalls should return -ENOSYS - Allow samples/bpf/tracex5 to access syscall arguments for sane traces - Cleanup from old Kconfig options in defconfigs - Fix PREF instruction usage by memcpy for MIPS R6 - Fix various special cases in the FPU eulation - Fix some special cases in MIPS16e2 support - Fix MIPS I ISA /proc/cpuinfo reporting - Sort MIPS Kconfig alphabetically - Fix minimum alignment requirement of IRQ stack as required by ABI / GCC - Fix special cases in the module loader - Perform post-DMA cache flushes on systems with MAARs - Probe the I6500 CPU - Cleanup cmpxchg and add support for 1 and 2 byte operations - Use queued read/write locks (qrwlock) - Use queued spinlocks (qspinlock) - Add CPU shared FTLB feature detection - Handle tlbex-tlbp race condition - Allow storing pgd in C0_CONTEXT for MIPSr6 - Use current_cpu_type() in m4kc_tlbp_war() - Support Boston in the generic kernel Generic platform: - yamon-dt: Pull YAMON DT shim code out of SEAD-3 board - yamon-dt: Support > 256MB of RAM - yamon-dt: Use serial* rather than uart* aliases - Abstract FDT fixup application - Set RTC_ALWAYS_BCD to 0 - Add a MAINTAINERS entry core kernel: - qspinlock.c: include linux/prefetch.h Loongson 3: - Add support Perf: - Add I6500 support SEAD-3: - Remove GIC timer from DT - Set interrupt-parent per-device, not at root node - Fix GIC interrupt specifiers SMP: - Skip IPI setup if we only have a single CPU VDSO: - Make comment match reality - Improvements to time code in VDSO" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits) locking/qspinlock: Include linux/prefetch.h MIPS: Fix MIPS I ISA /proc/cpuinfo reporting MIPS: Fix minimum alignment requirement of IRQ stack MIPS: generic: Support MIPS Boston development boards MIPS: DTS: img: Don't attempt to build-in all .dtb files clk: boston: Add a driver for MIPS Boston board clocks dt-bindings: Document img,boston-clock binding MIPS: Traced negative syscalls should return -ENOSYS MIPS: Correct forced syscall errors MIPS: Negate error syscall return in trace MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select MIPS16e2: Provide feature overrides for non-MIPS16 systems MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions MIPS: MIPS16e2: Identify ASE presence MIPS: VDSO: Fix a mismatch between comment and preprocessor constant MIPS: VDSO: Add implementation of gettimeofday() fallback MIPS: VDSO: Add implementation of clock_gettime() fallback MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse() MIPS: Use current_cpu_type() in m4kc_tlbp_war() ...
2017-07-15Merge branch 'for-linus-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: "Mostly fixes for UML: - First round of fixes for PTRACE_GETRESET/SETREGSET - A printf vs printk cleanup - Minor improvements" * 'for-linus-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Correctly check for PTRACE_GETRESET/SETREGSET um: v2: Use generic NOTES macro um: Add kerneldoc for userspace_tramp() and start_userspace() um: Add kerneldoc for segv_handler um: stub-data.h: remove superfluous include um: userspace - be more verbose in ptrace set regs error um: add dummy ioremap and iounmap functions um: Allow building and running on older hosts um: Avoid longjmp/setjmp symbol clashes with libpthread.a um: console: Ignore console= option um: Use os_warn to print out pre-boot warning/error messages um: Add os_warn() for pre-boot warning/error messages um: Use os_info for the messages on normal path um: Add os_info() for pre-boot information messages um: Use printk instead of printf in make_uml_dir
2017-07-15Merge tag 'upstream-4.13-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBIFS updates from Richard Weinberger: - Updates and fixes for the file encryption mode - Minor improvements - Random fixes * tag 'upstream-4.13-rc1' of git://git.infradead.org/linux-ubifs: ubifs: Set double hash cookie also for RENAME_EXCHANGE ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrs ubifs: Don't leak kernel memory to the MTD ubifs: Change gfp flags in page allocation for bulk read ubifs: Fix oops when remounting with no_bulk_read. ubifs: Fail commit if TNC is obviously inconsistent ubifs: allow userspace to map mounts to volumes ubifs: Wire-up statx() support ubifs: Remove dead code from ubifs_get_link() ubifs: Massage debug prints wrt. fscrypt ubifs: Add assert to dent_key_init() ubifs: Fix unlink code wrt. double hash lookups ubifs: Fix data node size for truncating uncompressed nodes ubifs: Don't encrypt special files on creation ubifs: Fix memory leak in RENAME_WHITEOUT error path in do_rename ubifs: Fix inode data budget in ubifs_mknod ubifs: Correctly evict xattr inodes ubifs: Unexport ubifs_inode_slab ubifs: don't bother checking for encryption key in ->mmap() ubifs: require key for truncate(2) of encrypted file
2017-07-15Merge tag 'kvm-4.13-2' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull more KVM updates from Radim Krčmář: "Second batch of KVM updates for v4.13 Common: - add uevents for VM creation/destruction - annotate and properly access RCU-protected objects s390: - rename IOCTL added in the first v4.13 merge x86: - emulate VMLOAD VMSAVE feature in SVM - support paravirtual asynchronous page fault while nested - add Hyper-V userspace interfaces for better migration - improve master clock corner cases - extend internal error reporting after EPT misconfig - correct single-stepping of emulated instructions in SVM - handle MCE during VM entry - fix nVMX VM entry checks and nVMX VMCS shadowing" * tag 'kvm-4.13-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) kvm: x86: hyperv: make VP_INDEX managed by userspace KVM: async_pf: Let guest support delivery of async_pf from guest mode KVM: async_pf: Force a nested vmexit if the injected #PF is async_pf KVM: async_pf: Add L1 guest async_pf #PF vmexit handler KVM: x86: Simplify kvm_x86_ops->queue_exception parameter list kvm: x86: hyperv: add KVM_CAP_HYPERV_SYNIC2 KVM: x86: make backwards_tsc_observed a per-VM variable KVM: trigger uevents when creating or destroying a VM KVM: SVM: Enable Virtual VMLOAD VMSAVE feature KVM: SVM: Add Virtual VMLOAD VMSAVE feature definition KVM: SVM: Rename lbr_ctl field in the vmcb control area KVM: SVM: Prepare for new bit definition in lbr_ctl KVM: SVM: handle singlestep exception when skipping emulated instructions KVM: x86: take slots_lock in kvm_free_pit KVM: s390: Fix KVM_S390_GET_CMMA_BITS ioctl definition kvm: vmx: Properly handle machine check during VM-entry KVM: x86: update master clock before computing kvmclock_offset kvm: nVMX: Shadow "high" parts of shadowed 64-bit VMCS fields kvm: nVMX: Fix nested_vmx_check_msr_bitmap_controls kvm: nVMX: Validate the I/O bitmaps on nested VM-entry ...
2017-07-15random: reorder READ_ONCE() in get_random_uXXSebastian Andrzej Siewior
Avoid the READ_ONCE in commit 4a072c71f49b ("random: silence compiler warnings and fix race") if we can leave the function after arch_get_random_XXX(). Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-07-15random: suppress spammy warnings about unseeded randomnessTheodore Ts'o
Unfortunately, on some models of some architectures getting a fully seeded CRNG is extremely difficult, and so this can result in dmesg getting spammed for a surprisingly long time. This is really bad from a security perspective, and so architecture maintainers really need to do what they can to get the CRNG seeded sooner after the system is booted. However, users can't do anything actionble to address this, and spamming the kernel messages log will only just annoy people. For developers who want to work on improving this situation, CONFIG_WARN_UNSEEDED_RANDOM has been renamed to CONFIG_WARN_ALL_UNSEEDED_RANDOM. By default the kernel will always print the first use of unseeded randomness. This way, hopefully the security obsessed will be happy that there is _some_ indication when the kernel boots there may be a potential issue with that architecture or subarchitecture. To see all uses of unseeded randomness, developers can enable CONFIG_WARN_ALL_UNSEEDED_RANDOM. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-07-14Merge tag 'xfs-4.13-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull XFS fixes from Darrick Wong: "Largely debugging and regression fixes. - Add some locking assertions for the _ilock helpers. - Revert the XFS_QMOPT_NOLOCK patch; after discussion with hch the online fsck patch that would have needed it has been redesigned and no longer needs it. - Fix behavioral regression of SEEK_HOLE/DATA with negative offsets to match 4.12-era XFS behavior" * tag 'xfs-4.13-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: vfs: in iomap seek_{hole,data}, return -ENXIO for negative offsets Revert "xfs: grab dquots without taking the ilock" xfs: assert locking precondition in xfs_readlink_bmap_ilocked xfs: assert locking precondіtion in xfs_attr_list_int_ilocked xfs: fixup xfs_attr_get_ilocked
2017-07-14Merge branch 'for-4.13-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "We've identified and fixed a silent corruption (introduced by code in the first pull), a fixup after the blk_status_t merge and two fixes to incremental send that Filipe has been hunting for some time" * 'for-4.13-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix unexpected return value of bio_readpage_error btrfs: btrfs_create_repair_bio never fails, skip error handling btrfs: cloned bios must not be iterated by bio_for_each_segment_all Btrfs: fix write corruption due to bio cloning on raid5/6 Btrfs: incremental send, fix invalid memory access Btrfs: incremental send, fix invalid path for link commands
2017-07-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull a few more input updates from Dmitry Torokhov: - multi-touch handling for Xen - fix for long-standing bug causing crashes in i8042 on boot - change to gpio_keys to better handle key presses during system state transition * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - fix crash at boot time Input: gpio_keys - handle the missing key press event in resume phase Input: xen-kbdfront - add multi-touch support
2017-07-14Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - fix new compiler warnings in cavium - set post-op IV properly in caam (this fixes chaining) - fix potential use-after-free in atmel in case of EBUSY - fix sleeping in softirq path in chcr - disable buggy sha1-avx2 driver (may overread and page fault) - fix use-after-free on signals in caam * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: cavium - make several functions static crypto: chcr - Avoid algo allocation in softirq. crypto: caam - properly set IV after {en,de}crypt crypto: atmel - only treat EBUSY as transient if backlog crypto: af_alg - Avoid sock_graft call warning crypto: caam - fix signals handling crypto: sha1-ssse3 - Disable avx2
2017-07-14Merge tag 'devprop-fix-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fix from Rafael Wysocki: "This fixes a problem with bool properties that could be seen as "true" when the property was not present at all by adding a special helper for bool properties with checks for all of the requisute conditions (Sakari Ailus)" * tag 'devprop-fix-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: Introduce fwnode_call_bool_op() for ops that return bool
2017-07-14Merge tag 'acpi-fixes-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix the return value of an IRQ mapping routine in the ACPI core, fix an EC driver issue causing abnormal fan behavior after system resume on some systems and add quirks for ACPI device objects that need to be treated as "always present" to work around bogus implementations of the _STA control method. Specifics: - Fix the return value of acpi_gsi_to_irq() to make the GSI to IRQ mapping work on the Mustang (ARM64) platform (Mark Salter). - Fix an EC driver issue that causes fans to behave abnormally after system resume on some systems which turns out to be related to switching over the EC into the polling mode during the noirq stages of system suspend and resume (Lv Zheng). - Add quirks for ACPI device objects that need to be treated as "always present", because their _STA methods are designed to work around Windows driver bugs and return garbage from our perspective (Hans de Goede)" * tag 'acpi-fixes-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / x86: Add KIOX000A accelerometer on GPD win to always_present_ids array ACPI / x86: Add Dell Venue 11 Pro 7130 touchscreen to always_present_ids ACPI / x86: Allow matching always_present_id array entries by DMI Revert "ACPI / EC: Enable event freeze mode..." to fix a regression ACPI / EC: Drop EC noirq hooks to fix a regression ACPI / irq: Fix return code of acpi_gsi_to_irq()
2017-07-14Merge tag 'pm-fixes-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a recently exposed issue in the PCI device wakeup code and one older problem related to PCI device wakeup that has been reported recently, modify one more piece of computations in intel_pstate to get rid of a rounding error, fix a possible race in the schedutil cpufreq governor, fix the device PM QoS sysfs interface to correctly handle invalid user input, fix return values of two probe routines in devfreq drivers and constify an attribute_group structure in devfreq. Specifics: - Avoid clearing the PCI PME Enable bit for devices as a result of config space restoration which confuses AML executed afterward and causes wakeup events to be lost on some systems (Rafael Wysocki). - Fix the native PCIe PME interrupts handling in the cases when the PME IRQ is set up as a system wakeup one so that runtime PM remote wakeup works as expected after system resume on systems where that happens (Rafael Wysocki). - Fix the device PM QoS sysfs interface to handle invalid user input correctly instead of using an unititialized variable value as the latency tolerance for the device at hand (Dan Carpenter). - Get rid of one more rounding error from intel_pstate computations (Srinivas Pandruvada). - Fix the schedutil cpufreq governor to prevent it from possibly accessing unititialized data structures from governor callbacks in some cases on systems when multiple CPUs share a single cpufreq policy object (Vikram Mulukutla). - Fix the return values of probe routines in two devfreq drivers (Gustavo Silva). - Constify an attribute_group structure in devfreq (Arvind Yadav)" * tag 'pm-fixes-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PCI / PM: Fix native PME handling during system suspend/resume PCI / PM: Restore PME Enable after config space restoration cpufreq: schedutil: Fix sugov_start() versus sugov_update_shared() race PM / QoS: return -EINVAL for bogus strings cpufreq: intel_pstate: Fix ratio setting for min_perf_pct PM / devfreq: constify attribute_group structures. PM / devfreq: tegra: fix error return code in tegra_devfreq_probe() PM / devfreq: rk3399_dmc: fix error return code in rk3399_dmcfreq_probe()
2017-07-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge even more updates from Andrew Morton: - a few leftovers - fault-injector rework - add a module loader test driver * emailed patches from Andrew Morton <akpm@linux-foundation.org>: kmod: throttle kmod thread limit kmod: add test driver to stress test the module loader MAINTAINERS: give kmod some maintainer love xtensa: use generic fb.h fault-inject: add /proc/<pid>/fail-nth fault-inject: simplify access check for fail-nth fault-inject: make fail-nth read/write interface symmetric fault-inject: parse as natural 1-based value for fail-nth write interface fault-inject: automatically detect the number base for fail-nth write interface kernel/watchdog.c: use better pr_fmt prefix MAINTAINERS: move the befs tree to kernel.org lib/atomic64_test.c: add a test that atomic64_inc_not_zero() returns an int mm: fix overflow check in expand_upwards()
2017-07-14replace incorrect strscpy use in FORTIFY_SOURCEDaniel Micay
Using strscpy was wrong because FORTIFY_SOURCE is passing the maximum possible size of the outermost object, but strscpy defines the count parameter as the exact buffer size, so this could copy past the end of the source. This would still be wrong with the planned usage of __builtin_object_size(p, 1) for intra-object overflow checks since it's the maximum possible size of the specified object with no guarantee of it being that large. Reuse of the fortified functions like this currently makes the runtime error reporting less precise but that can be improved later on. Noticed by Dave Jones and KASAN. Signed-off-by: Daniel Micay <danielmicay@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds
Pull arch/tile updates from Chris Metcalf: "This adds support for an <arch/intreg.h> to help with removing __need_xxx #defines from glibc, and removes some dead code in arch/tile/mm/init.c" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: mm, tile: drop arch_{add,remove}_memory tile: prefer <arch/intreg.h> to __need_int_reg_t
2017-07-14Merge tag 'powerpc-4.13-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Nothing that really stands out, just a bunch of fixes that have come in in the last couple of weeks. None of these are actually fixes for code that is new in 4.13. It's roughly half older bugs, with fixes going to stable, and half fixes/updates for Power9. Thanks to: Aneesh Kumar K.V, Anton Blanchard, Balbir Singh, Benjamin Herrenschmidt, Madhavan Srinivasan, Michael Neuling, Nicholas Piggin, Oliver O'Halloran" * tag 'powerpc-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64: Fix atomic64_inc_not_zero() to return an int powerpc: Fix emulation of mfocrf in emulate_step() powerpc: Fix emulation of mcrf in emulate_step() powerpc/perf: Add POWER9 alternate PM_RUN_CYC and PM_RUN_INST_CMPL events powerpc/perf: Fix SDAR_MODE value for continous sampling on Power9 powerpc/asm: Mark cr0 as clobbered in mftb() powerpc/powernv: Fix local TLB flush for boot and MCE on POWER9 powerpc/mm/radix: Synchronize updates to the process table powerpc/mm/radix: Properly clear process table entry powerpc/powernv: Tell OPAL about our MMU mode on POWER9 powerpc/kexec: Fix radix to hash kexec due to IAMR/AMOR
2017-07-14kmod: throttle kmod thread limitLuis R. Rodriguez
If we reach the limit of modprobe_limit threads running the next request_module() call will fail. The original reason for adding a kill was to do away with possible issues with in old circumstances which would create a recursive series of request_module() calls. We can do better than just be super aggressive and reject calls once we've reached the limit by simply making pending callers wait until the threshold has been reduced, and then throttling them in, one by one. This throttling enables requests over the kmod concurrent limit to be processed once a pending request completes. Only the first item queued up to wait is woken up. The assumption here is once a task is woken it will have no other option to also kick the queue to check if there are more pending tasks -- regardless of whether or not it was successful. By throttling and processing only max kmod concurrent tasks we ensure we avoid unexpected fatal request_module() calls, and we keep memory consumption on module loading to a minimum. With x86_64 qemu, with 4 cores, 4 GiB of RAM it takes the following run time to run both tests: time ./kmod.sh -t 0008 real 0m16.366s user 0m0.883s sys 0m8.916s time ./kmod.sh -t 0009 real 0m50.803s user 0m0.791s sys 0m9.852s Link: http://lkml.kernel.org/r/20170628223155.26472-4-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14kmod: add test driver to stress test the module loaderLuis R. Rodriguez
This adds a new stress test driver for kmod: the kernel module loader. The new stress test driver, test_kmod, is only enabled as a module right now. It should be possible to load this as built-in and load tests early (refer to the force_init_test module parameter), however since a lot of test can get a system out of memory fast we leave this disabled for now. Using a system with 1024 MiB of RAM can *easily* get your kernel OOM fast with this test driver. The test_kmod driver exposes API knobs for us to fine tune simple request_module() and get_fs_type() calls. Since these API calls only allow each one parameter a test driver for these is rather simple. Other factors that can help out test driver though are the number of calls we issue and knowing current limitations of each. This exposes configuration as much as possible through userspace to be able to build tests directly from userspace. Since it allows multiple misc devices its will eventually (once we add a knob to let us create new devices at will) also be possible to perform more tests in parallel, provided you have enough memory. We only enable tests we know work as of right now. Demo screenshots: # tools/testing/selftests/kmod/kmod.sh kmod_test_0001_driver: OK! - loading kmod test kmod_test_0001_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND kmod_test_0001_fs: OK! - loading kmod test kmod_test_0001_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL kmod_test_0002_driver: OK! - loading kmod test kmod_test_0002_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND kmod_test_0002_fs: OK! - loading kmod test kmod_test_0002_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL kmod_test_0003: OK! - loading kmod test kmod_test_0003: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0004: OK! - loading kmod test kmod_test_0004: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0005: OK! - loading kmod test kmod_test_0005: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0006: OK! - loading kmod test kmod_test_0006: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0005: OK! - loading kmod test kmod_test_0005: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0006: OK! - loading kmod test kmod_test_0006: OK! - Return value: 0 (SUCCESS), expected SUCCESS XXX: add test restult for 0007 Test completed You can also request for specific tests: # tools/testing/selftests/kmod/kmod.sh -t 0001 kmod_test_0001_driver: OK! - loading kmod test kmod_test_0001_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND kmod_test_0001_fs: OK! - loading kmod test kmod_test_0001_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL Test completed Lastly, the current available number of tests: # tools/testing/selftests/kmod/kmod.sh --help Usage: tools/testing/selftests/kmod/kmod.sh [ -t <4-number-digit> ] Valid tests: 0001-0009 0001 - Simple test - 1 thread for empty string 0002 - Simple test - 1 thread for modules/filesystems that do not exist 0003 - Simple test - 1 thread for get_fs_type() only 0004 - Simple test - 2 threads for get_fs_type() only 0005 - multithreaded tests with default setup - request_module() only 0006 - multithreaded tests with default setup - get_fs_type() only 0007 - multithreaded tests with default setup test request_module() and get_fs_type() 0008 - multithreaded - push kmod_concurrent over max_modprobes for request_module() 0009 - multithreaded - push kmod_concurrent over max_modprobes for get_fs_type() The following test cases currently fail, as such they are not currently enabled by default: # tools/testing/selftests/kmod/kmod.sh -t 0008 # tools/testing/selftests/kmod/kmod.sh -t 0009 To be sure to run them as intended please unload both of the modules: o test_module o xfs And ensure they are not loaded on your system prior to testing them. If you use these paritions for your rootfs you can change the default test driver used for get_fs_type() by exporting it into your environment. For example of other test defaults you can override refer to kmod.sh allow_user_defaults(). Behind the scenes this is how we fine tune at a test case prior to hitting a trigger to run it: cat /sys/devices/virtual/misc/test_kmod0/config echo -n "2" > /sys/devices/virtual/misc/test_kmod0/config_test_case echo -n "ext4" > /sys/devices/virtual/misc/test_kmod0/config_test_fs echo -n "80" > /sys/devices/virtual/misc/test_kmod0/config_num_threads cat /sys/devices/virtual/misc/test_kmod0/config echo -n "1" > /sys/devices/virtual/misc/test_kmod0/config_num_threads Finally to trigger: echo -n "1" > /sys/devices/virtual/misc/test_kmod0/trigger_config The kmod.sh script uses the above constructs to build different test cases. A bit of interpretation of the current failures follows, first two premises: a) When request_module() is used userspace figures out an optimized version of module order for us. Once it finds the modules it needs, as per depmod symbol dep map, it will finit_module() the respective modules which are needed for the original request_module() request. b) We have an optimization in place whereby if a kernel uses request_module() on a module already loaded we never bother userspace as the module already is loaded. This is all handled by kernel/kmod.c. A few things to consider to help identify root causes of issues: 0) kmod 19 has a broken heuristic for modules being assumed to be built-in to your kernel and will return 0 even though request_module() failed. Upgrade to a newer version of kmod. 1) A get_fs_type() call for "xfs" will request_module() for "fs-xfs", not for "xfs". The optimization in kernel described in b) fails to catch if we have a lot of consecutive get_fs_type() calls. The reason is the optimization in place does not look for aliases. This means two consecutive get_fs_type() calls will bump kmod_concurrent, whereas request_module() will not. This one explanation why test case 0009 fails at least once for get_fs_type(). 2) If a module fails to load --- for whatever reason (kmod_concurrent limit reached, file not yet present due to rootfs switch, out of memory) we have a period of time during which module request for the same name either with request_module() or get_fs_type() will *also* fail to load even if the file for the module is ready. This explains why *multiple* NULLs are possible on test 0009. 3) finit_module() consumes quite a bit of memory. 4) Filesystems typically also have more dependent modules than other modules, its important to note though that even though a get_fs_type() call does not incur additional kmod_concurrent bumps, since userspace loads dependencies it finds it needs via finit_module_fd(), it *will* take much more memory to load a module with a lot of dependencies. Because of 3) and 4) we will easily run into out of memory failures with certain tests. For instance test 0006 fails on qemu with 1024 MiB of RAM. It panics a box after reaping all userspace processes and still not having enough memory to reap. [arnd@arndb.de: add dependencies for test module] Link: http://lkml.kernel.org/r/20170630154834.3689272-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170628223155.26472-3-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Jessica Yu <jeyu@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14MAINTAINERS: give kmod some maintainer loveLuis R. Rodriguez
As suggested by Jessica, I've been actively working on kmod, so might as well reflect its maintained status. Changes are expected to go through akpm's tree. Link: http://lkml.kernel.org/r/20170628223155.26472-2-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Suggested-by: Jessica Yu <jeyu@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14xtensa: use generic fb.hTobias Klauser
The arch uses a verbatim copy of the asm-generic version and does not add any own implementations to the header, so use asm-generic/fb.h instead of duplicating code. Link: http://lkml.kernel.org/r/20170517083545.2115-1-tklauser@distanz.ch Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14fault-inject: add /proc/<pid>/fail-nthAkinobu Mita
fail-nth interface is only created in /proc/self/task/<current-tid>/. This change also adds it in /proc/<pid>/. This makes shell based tool a bit simpler. $ bash -c "builtin echo 100 > /proc/self/fail-nth && exec ls /" Link: http://lkml.kernel.org/r/1491490561-10485-6-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14fault-inject: simplify access check for fail-nthAkinobu Mita
The fail-nth file is created with 0666 and the access is permitted if and only if the task is current. This file is owned by the currnet user. So we can create it with 0644 and allow the owner to write it. This enables to watch the status of task->fail_nth from another processes. [akinobu.mita@gmail.com: don't convert unsigned type value as signed int] Link: http://lkml.kernel.org/r/1492444483-9239-1-git-send-email-akinobu.mita@gmail.com [akinobu.mita@gmail.com: avoid unwanted data race to task->fail_nth] Link: http://lkml.kernel.org/r/1499962492-8931-1-git-send-email-akinobu.mita@gmail.com Link: http://lkml.kernel.org/r/1491490561-10485-5-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14fault-inject: make fail-nth read/write interface symmetricAkinobu Mita
The read interface for fail-nth looks a bit odd. Read from this file returns "NYYYY..." or "YYYYY..." (this makes me surprise when cat this file). Because there is no EOF condition. The first character indicates current->fail_nth is zero or not, and then current->fail_nth is reset to zero. Just returning task->fail_nth value is more natural to understand. Link: http://lkml.kernel.org/r/1491490561-10485-4-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14fault-inject: parse as natural 1-based value for fail-nth write interfaceAkinobu Mita
The value written to fail-nth file is parsed as 0-based. Parsing as one-based is more natural to understand and it enables to cancel the previous setup by simply writing '0'. This change also converts task->fail_nth from signed to unsigned int. Link: http://lkml.kernel.org/r/1491490561-10485-3-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14fault-inject: automatically detect the number base for fail-nth write interfaceAkinobu Mita
Automatically detect the number base to use when writing to fail-nth file instead of always parsing as a decimal number. Link: http://lkml.kernel.org/r/1491490561-10485-2-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14kernel/watchdog.c: use better pr_fmt prefixKefeng Wang
After commit 73ce0511c436 ("kernel/watchdog.c: move hardlockup detector to separate file"), 'NMI watchdog' is inappropriate in kernel/watchdog.c, using 'watchdog' only. Link: http://lkml.kernel.org/r/1499928642-48983-1-git-send-email-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Babu Moger <babu.moger@oracle.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14MAINTAINERS: move the befs tree to kernel.orgLuis de Bethencourt
Update the location of the befs git tree and my email address. Link: http://lkml.kernel.org/r/20170709110012.2991-1-luisbg@kernel.org Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14lib/atomic64_test.c: add a test that atomic64_inc_not_zero() returns an intMichael Ellerman
atomic64_inc_not_zero() returns a "truth value" which in C is traditionally an int. That means callers are likely to expect the result will fit in an int. If an implementation returns a "true" value which does not fit in an int, then there's a possibility that callers will truncate it when they store it in an int. In fact this happened in practice, see commit 966d2b04e070 ("percpu-refcount: fix reference leak during percpu-atomic transition"). So add a test that the result fits in an int, even when the input doesn't. This catches the case where an implementation just passes the non-zero input value out as the result. Link: http://lkml.kernel.org/r/1499775133-1231-1-git-send-email-mpe@ellerman.id.au Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14mm: fix overflow check in expand_upwards()Helge Deller
Jörn Engel noticed that the expand_upwards() function might not return -ENOMEM in case the requested address is (unsigned long)-PAGE_SIZE and if the architecture didn't defined TASK_SIZE as multiple of PAGE_SIZE. Affected architectures are arm, frv, m68k, blackfin, h8300 and xtensa which all define TASK_SIZE as 0xffffffff, but since none of those have an upwards-growing stack we currently have no actual issue. Nevertheless let's fix this just in case any of the architectures with an upward-growing stack (currently parisc, metag and partly ia64) define TASK_SIZE similar. Link: http://lkml.kernel.org/r/20170702192452.GA11868@p100.box Fixes: bd726c90b6b8 ("Allow stack to grow up to address space limit") Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: Jörn Engel <joern@purestorage.com> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14ubifs: Set double hash cookie also for RENAME_EXCHANGERichard Weinberger
We developed RENAME_EXCHANGE and UBIFS_FLG_DOUBLE_HASH more or less in parallel and this case was forgotten. :-( Cc: stable@vger.kernel.org Fixes: d63d61c16972 ("ubifs: Implement UBIFS_FLG_DOUBLE_HASH") Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrsXiaolei Li
The inode is not locked in init_xattrs when creating a new inode. Without this patch, there will occurs assert when booting or creating a new file, if the kernel config CONFIG_SECURITY_SMACK is enabled. Log likes: UBIFS assert failed in ubifs_xattr_set at 298 (pid 1156) CPU: 1 PID: 1156 Comm: ldconfig Tainted: G S 4.12.0-rc1-207440-g1e70b02 #2 Hardware name: MediaTek MT2712 evaluation board (DT) Call trace: [<ffff000008088538>] dump_backtrace+0x0/0x238 [<ffff000008088834>] show_stack+0x14/0x20 [<ffff0000083d98d4>] dump_stack+0x9c/0xc0 [<ffff00000835d524>] ubifs_xattr_set+0x374/0x5e0 [<ffff00000835d7ec>] init_xattrs+0x5c/0xb8 [<ffff000008385788>] security_inode_init_security+0x110/0x190 [<ffff00000835e058>] ubifs_init_security+0x30/0x68 [<ffff00000833ada0>] ubifs_mkdir+0x100/0x200 [<ffff00000820669c>] vfs_mkdir+0x11c/0x1b8 [<ffff00000820b73c>] SyS_mkdirat+0x74/0xd0 [<ffff000008082f8c>] __sys_trace_return+0x0/0x4 Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Richard Weinberger <richard@nod.at>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 17:31:00 +0000