summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-03staging: MIPS: add Octeon USB HCD supportAaro Koskinen
Add support for Octeon USB HCD. Tested on EdgeRouter Lite with USB mass storage. The driver has been extracted from GPL sources of EdgeRouter Lite firmware (based on Linux 2.6.32.13). Some minor fixes and cleanups have been done to make it work with 3.10-rc3. $ uname -a Linux (none) 3.10.0-rc3-edge-00005-g86cb5bc #41 SMP PREEMPT Sat Jun 1 20:41:46 EEST 2013 mips64 GNU/Linux $ modprobe octeon-usb [ 37.971683] octeon_usb: module is from the staging directory, the quality is unknown, you have been warned. [ 37.983649] OcteonUSB: Detected 1 ports [ 37.999360] OcteonUSB OcteonUSB.0: Octeon Host Controller [ 38.004847] OcteonUSB OcteonUSB.0: new USB bus registered, assigned bus number 1 [ 38.012332] OcteonUSB OcteonUSB.0: irq 122, io mem 0x00000000 [ 38.019970] hub 1-0:1.0: USB hub found [ 38.023851] hub 1-0:1.0: 1 port detected [ 38.028101] OcteonUSB: Registered HCD for port 0 on irq 122 [ 38.391443] usb 1-1: new high-speed USB device number 2 using OcteonUSB [ 38.586922] usb-storage 1-1:1.0: USB Mass Storage device detected [ 38.597375] scsi0 : usb-storage 1-1:1.0 [ 39.604111] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4 [ 39.619113] sd 0:0:0:0: [sda] 7579008 512-byte logical blocks: (3.88 GB/3.61 GiB) [ 39.630696] sd 0:0:0:0: [sda] Write Protect is off [ 39.635945] sd 0:0:0:0: [sda] No Caching mode page present [ 39.641464] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 39.651341] sd 0:0:0:0: [sda] No Caching mode page present [ 39.656917] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 39.664296] sda: sda1 sda2 [ 39.675574] sd 0:0:0:0: [sda] No Caching mode page present [ 39.681093] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 39.687223] sd 0:0:0:0: [sda] Attached SCSI removable disk Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <ddaney.cavm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging: btmtk_usb: use GFP_KERNEL inplace of GFP_ATOMIC in _probe pathDevendra Naga
the _probe function doesn't run in interrupt context, so no need to use the GFP_ATOMIC allocations, instead driver can request for GFP_KERNEL Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03Staging: winbond: Check for unsuccessful allocation immediatelyHarsh Kumar
Check to see if allocation by kzalloc() or usb_alloc_urb() was unsuccessful immediately after the allocation. Exit from the function can be right at that point in case of allocation failure. This avoids unnecessary use of usb_alloc_urb() & usb_free_urb() if kzalloc() returns NULL. Also, makes the code better structured & easier to understand. Signed-off-by: Harsh Kumar <harsh1kumar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging: dwc2: remove redundant D0 power state setYijing Wang
Pci_enable_device() will set device power state to D0, so it's no need to do it again in dwc2_driver_probe(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03Staging: crystalhd: remove an unneeded NULL checkDan Carpenter
We already established earlier in the function that "temp" is non-NULL. We also don't need to set to NULL because it's a stack variable an we return immediately. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging: rts5139: Use correct USB transfer interval to fix syslog spammingMarcus Overhagen
Using correct transfer interval as specified by the USB endpoint when doing the interrupt transfer fixes the warning printed by xhci USB core on every transfer that resulted in spamming "xhci_queue_intr_tx: 74 callbacks suppressed" to syslog every 5 seconds. Signed-off-by: Marcus Overhagen <marcus.overhagen@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging: rts5139: Fix SD card detection on Samsung NP730U3E UltrabookMarcus Overhagen
The timeout detection implemented in this driver isn't very robust. Although the USB interrupt transfer was successful, the polling thread often reported timeouts because the 50ms had expired before it got scheduled, and the SD card wasn't detected. Increasing it to 100ms, as used in other places of this driver, makes it work. Signed-off-by: Marcus Overhagen <marcus.overhagen@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre: fix return value check in libcfs_sock_ioctl()Wei Yongjun
In case of error, the function sock_alloc_file() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre: clean up and remove libcfs/linux/linux-mem.cPeng Tao
Those are simple wrappers for numa allocator. We don't need them. Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre: remove empty file libcfs/linux/linux-lock.cPeng Tao
It was emptied by coan. So drop it. Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre: remove libcfs/linux/linux-utils.cPeng Tao
It is not used any more. Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre: remove empty file libcfs/linux/linux-sync.cPeng Tao
It was emptied by coan. So we no longer need it. Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre: silence gcc build warningPeng Tao
got bellow build warning that is indeed a false alarm. CC [M] drivers/staging/lustre/lustre/llite/llite_nfs.o drivers/staging/lustre/lustre/libcfs/nidstrings.c: In function ‘ libcfs_str2net_internal’: drivers/staging/lustre/lustre/libcfs/nidstrings.c:432:17: warning: ‘nf’ may be used uninitialized in this function [-Wuninitializ ed] Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre: clean up and remove libcfs/linux/linux-fs.cPeng Tao
filp_user_write() is open coded in libcfs_kkuc_msg_put(). All other functions/macros have no user at all. So we can remove the file. Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre: llite: add module aliasPeng Tao
So that sys_mount can find and load lustre module automatically. Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre: silence lockdep warning in ll_md_blocking_astPeng Tao
Got bellow lockdep warning during tests. It is false alarm though. [ 1184.479097] ============================================= [ 1184.479187] [ INFO: possible recursive locking detected ] [ 1184.479277] 3.10.0-rc3+ #13 Tainted: G C [ 1184.479355] --------------------------------------------- [ 1184.479444] mkdir/2215 is trying to acquire lock: [ 1184.479521] (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc27c>] ll_md_blocking_ast+0x55c/0x655 [lustre] [ 1184.479801] but task is already holding lock: [ 1184.479895] (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc1b1>] ll_md_blocking_ast+0x491/0x655 [lustre] [ 1184.480101] other info that might help us debug this: [ 1184.480206] Possible unsafe locking scenario: [ 1184.480300] CPU0 [ 1184.480340] ---- [ 1184.480380] lock(&(&dentry->d_lock)->rlock); [ 1184.480458] lock(&(&dentry->d_lock)->rlock); [ 1184.480536] *** DEADLOCK *** [ 1184.480761] May be due to missing lock nesting notation [ 1184.480936] 4 locks held by mkdir/2215: [ 1184.481037] #0: (sb_writers#11){.+.+.+}, at: [<ffffffff811531a9>] mnt_want_write+0x24/0x4b [ 1184.481273] #1: (&type->i_mutex_dir_key#3/1){+.+.+.}, at: [<ffffffff81144fce>] kern_path_create+0x8c/0x144 [ 1184.481513] #2: (&sb->s_type->i_lock_key#19){+.+...}, at: [<ffffffffa06cc180>] ll_md_blocking_ast+0x460/0x655 [lustre] [ 1184.481778] #3: (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc1b1>] ll_md_blocking_ast+0x491/0x655 [lustre] [ 1184.482050] Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre: remove empty file lustre/ptlrpc/nrs_orr.cPeng Tao
It is used by server only and we had it emptied with coan. Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/osc: check ostid if no OBD_CONNECT_FIDHongchao Zhang
in lustre_set_wire_obdo, if "ocd->ocd_connect_flags" doesn't contain OBD_CONNECT_FID, use "ost_id" to check the type of the object instead of using ost_id.oi_fid only. Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3360 Lustre-change: http://review.whamcloud.com/6426 Signed-off-by: Hongchao Zhang <hongchao.zhang@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Reviewed-by: wangdi <di.wang@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/tests: check nr_local in ofd_preprw()Jian Yu
This patch checks the number of bulk I/O RPC pages with PTLRPC_MAX_BRW_PAGES in ofd_preprw() to avoid LASSERT(iobuf->dr_npages < iobuf->dr_max_pages) occurring while larger I/O size is specified. The patch also fixes echo_client_prep_commit() to reuse the env context so as to avoid LASSERT(info->fti_exp == NULL) occurring while the bulk I/O size is larger than PTLRPC_MAX_BRW_SIZE. The patch also improves obdfilter-survey to handle the case while interoprating with old server. [picked echo client part for upstream kernel submission] Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2598 Lustre-change: http://review.whamcloud.com/6394 Signed-off-by: Jian Yu <jian.yu@intel.com> Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/osc: fixed a typo in osc_cache_truncate_startJinshan Xiong
Dump osc_extent waiting instead of ext in case error occurred. Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3359 Lustre-change: http://review.whamcloud.com/6402 Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by: Lai Siyao <lai.siyao@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/llite: Always build 64bit ino internallywang di
Always build 64bit ino internally except the client is mounted with "32bitapi" option, so client will always use 64bit ino internally. It will build 32bit ino, only if application requires 32 bit ino. Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3318 Lustre-change: http://review.whamcloud.com/6371 Signed-off-by: wang di <di.wang@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Fan Yong <fan.yong@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/mdt: set ATTR_xTIME_SET to make atime update properlyEmoly Liu
To make atime update properly between 1.8 client and 2.x server, this patch includes the following fixes: - if MDS_ATTR_xTIME is set without MDS_ATTR_xTIME_SET and the client does not have OBD_CONNECT_FULL20, convert it to LA_xTIME in mdt_setattr_unpack(). - set both MDS_ATTR_xTIME | MDS_ATTR_xTIME_SET for timestamps in ll_prepare_close(). This allows us to fix the server-side timestamp setting in the future. - remove attr_unpack() and convert the flags from MDS_ATTR_ to LA_* directly in mdt_attr_valid_xlate() instead. - improve sanityn.sh test_23(). [picked llite part for upstream kernel submission] Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3036 Lustre-change: http://review.whamcloud.com/6327 Signed-off-by: Liu Ying <emoly.liu@intel.com> Reviewed-by: Fan Yong <fan.yong@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/changelog: fix CL_LAYOUT comment, stringAndreas Dilger
Fix the CL_LAYOUT comment, since it is possible that layout swap could be used in cases where the file content is changed. I don't think there are any real world use cases for this, but that depends on what tools are being used on the filesystem. Also change the "LAYOUT" string for this ChangeLog record type to be "LYOUT" to match the convention of other strings to only be 5 characters long. Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3279 Lustre-change: http://review.whamcloud.com/6338 Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/ost: Ensure dirty flushed on fiemap ioctlArtem Blagodarenko
Data corruption is possible if cp(coreutils) uses FIEMAP to obtain data holes in shared file, since there could be dirty cache on other clients which hasn't been flushed back. To ensure all the dirty on remote clients being flushed back on fiemap ioctl, we'd acquire ldlm lock on server side for fiemap, unless the local client (which invoke fiemap) has cached lock. [picked osc part for upstream kernel submission] Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3219 Xyratex-bug-id: MRP-1001 Lustre-change: http://review.whamcloud.com/6127 Signed-off-by: Artem Blagodarenko <artem_blagodarenko@xyratex.com> Signed-off-by: Niu Yawei <yawei.niu@intel.com> Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com> Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/changelog: fix CL_LAYOUT, accept all typesAndreas Dilger
In order to avoid compatibility issues with older ChangeLog consumers, change the new CL_LAYOUT record to use the value previously assigned to CL_IOCTL. The CL_IOCTL type was never used anywhere, and it didn't really make any sense as a ChangeLog record, since it could really mean anything at all. The changelog_show_cb() function is renamed to changelog_kkuc_cb(), since it is really about consuming the ChangeLog and passing it up to the kernel-user-coms interface. At some point we should consider to implement a DBUS-based ChangeLog interface as well. The changelog_kkuc_cb() "sanity check" on cr_type was removed, since there is no reason the client kernel needs to know every record type that is being passed to userspace. It is up to the client tool to determine what records that it can process. Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3279 Lustre-change: http://review.whamcloud.com/6308 Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Bobi Jam <bobijam@gmail.com> Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by: Mike Pershin <mike.pershin@intel.com> Reviewed-by: Aurelien Degremont <aurelien.degremont@cea.fr> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/lprocfs: use stats counter index for *posJohn L. Hammond
In lprocfs_stats_seq_{start,next,show,stop}() encode the counter index (rather than the counter address) into *pos. Doing so simplifies these functions and fixes a bug in the case of per-CPU stats where no stats would be displayed at all if no events had yet occurred on CPU 0. Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2979 Lustre-change: http://review.whamcloud.com/6328 Signed-off-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: wangdi <di.wang@intel.com> Reviewed-by: Bobi Jam <bobijam@gmail.com> Reviewed-by: Emoly Liu <emoly.liu@intel.com> Reviewed-by: Keith Mannthey <keith.mannthey@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/ost: check pre 2.4 echo client in obdo validationwang di
Because old echo client still uses o_id/o_seq for objid, but new echo client will uses FID for the objid. Add OBD_CONNECT_FID for 2.4 echo client, so 2.4 OST will convert o_id/o_seq to FID if the request from old echo client. Add local flag OBD_FL_OSTID for o_flags to indicate OST does not support FID yet, then echo client will still send o_id/o_seq to OST. cleanup ost_validate_obdo [picked client part for upstream kernel submission] Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3187 Lustre-change: http://review.whamcloud.com/6287 Signed-off-by: wang di <di.wang@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Mike Pershin <mike.pershin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/llog: Do not use ostid swab for llogidwang di
Since logid still use id/seq format in the request, it will be swabbed by its own swab func, instead of using ostid swab, which might see logid as FID incorrectly. Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3302 Lustre-change: http://review.whamcloud.com/6305 Signed-off-by: wang di <di.wang@intel.com> Reviewed-by: John Hammond <johnlockwoodhammond@gmail.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/obdclass: use common way to store lastidMikhail Pershin
Local files last id are stored in root in files named seq-xxx-lastid while lastid for OST objects is stored in O/seq/LAST_ID special object with zero OID and handled by OSD. Patch reworks local files lastid to be stored in O/seq/LAST_ID too and using the same format. Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2886 Lustre-change: http://review.whamcloud.com/6199 Signed-off-by: Mikhail Pershin <mike.pershin@intel.com> Signed-off-by: James Nunez <james.a.nunez@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by: Fan Yong <fan.yong@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/lov: only dump header in lsm_lmm_verifyAndreas Dilger
If lsm_lmm_verify_*() find an error in the lov_mds_md header structure, don't dump the full stripe information, since this can be totally bogus (e.g. if stripe_count == -1 or similar). Instead, just dump the header information for debugging. Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3271 Lustre-change: http://review.whamcloud.com/6261 Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: John Hammond <johnlockwoodhammond@gmail.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/obdclass: remove obsoleted md_local_file.cMikhail Pershin
This library is not used anymore and is replaced by local_storage.c. Patch removed last remnants of it. Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2886 Lustre-change: http://review.whamcloud.com/6107 Signed-off-by: Mikhail Pershin <mike.pershin@intel.com> Reviewed-by: Fan Yong <fan.yong@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/osc: some cleanup to reduce stack overflow chanceBobi Jam
ptlrpcd_add_req() will wake_up other process, do not hold a spinlock before calling ptlrpcd_queue_work()->ptlrpcd_add_req(). If current process is allocating memory, memory shrinker could get to osc_lru_del(), don't call osc_lru_shrink() further since it could lead a long calling chain. Use static string OES_STRINGS in OSC_EXTENT_DUMP() to reduce stack footprint. Alloc crattr on heap for osc_build_rpc() to reduce stack footprint. Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3281 Lustre-change: http://review.whamcloud.com/6270 Signed-off-by: Bobi Jam <bobijam.xu@intel.com> Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by: Keith Mannthey <keith.mannthey@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/ldlm: suppress useless lock RPC for layoutJC Lafoucriere
In ldlm_lock_decref_internal() when l_lvb_data is freed to reduce memory consumption, LDLM_FL_LVB_READY is not cleared, so later when the lock is reused lvb is not updated. But clearing LDLM_FL_LVB_READY forces layout refetch at each file access, so the better is to remove the optimization. The use case is after a restore in HSM. Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3280 Lustre-change: http://review.whamcloud.com/6268 Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr> Reviewed-by: Fan Yong <fan.yong@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre: Revert "LU-2139 osc: Track and limit "unstable" pages"Oleg Drokin
This seems to be causing multiple issues: LU-3274, LU-3277 [The original commit is folded in the large Lusre patch. So we don't have an exact commit to revert for kernel client -- Peng Tao] Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/debug: quiet noisy console error messagesAndreas Dilger
Quiet a number of overly noisy and unhelpful console error messages. Improve the format of other nearby errors. In the case of {lod,lov}_fix_desc_stripe_size(), this doesn't even need a console message unless it is actually changing some stripe size that is below the minimum. Typically it is only zero and is being bumped up to the default value. [picked lov part for upstream kernel submission] Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1095 Lustre-change: http://review.whamcloud.com/6264 Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Bobi Jam <bobijam@gmail.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/utils: missing setting echo seq for getattr/setattrwang di
It should set echo seq before do echo getattr/setattr, otherwise echo_client will regard it as the object with MDT0 sequence. [picked echo client part for upstream kernel submission] Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3267 Lustre-change: http://review.whamcloud.com/6263 Signed-off-by: wang di <di.wang@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Lai Siyao <lai.siyao@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/fids: fix compilation error with gcc 4.7.2Alex Zhuravlev
initialize oi.oi.oi_id which gcc 4.7.2 is afraid of being used later. Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3179 Lustre-change: http://review.whamcloud.com/6064 Signed-off-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by: wangdi <di.wang@intel.com> Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/ofd: refill env in ofd_get_infowang di
Because ofd_get_info(KEY_FIEMAP) might be called from ptlrpc_server_handle_req_in(see the stack below), where env might not be initialized correctly(see LBUG below), so it refill refill in ofd_get_info. LutreError: 19182:0:(ofd_internal.h:518:ofd_info_init()) LBUG Pid: 19182, comm: ll_ost_io00_001 Call Trace: [<ffffffffa044e895>] libcfs_debug_dumpstack+0x55/0x80 [libcfs] [<ffffffffa044ee97>] lbug_with_loc+0x47/0xb0 [libcfs] [<ffffffffa0e03e62>] ofd_info_init+0x92/0x130 [ofd] [<ffffffffa0e05835>] ofd_get_info+0x2e5/0xa90 [ofd] [<ffffffff812805cd>] ? pointer+0x8d/0x830 [<ffffffffa029f7e5>] ? lprocfs_counter_add+0x125/0x182 [lvfs] [<ffffffffa078528a>] nrs_orr_range_fill_physical+0x18a/0x540 [ptlrpc] [<ffffffffa0762dd6>] ? __req_capsule_get+0x166/0x700 [ptlrpc] [<ffffffffa073e630>] ? lustre_swab_ost_body+0x0/0x10 [ptlrpc] [<ffffffffa07871d7>] nrs_orr_res_get+0x817/0xb80 [ptlrpc] [<ffffffffa077d306>] nrs_resource_get+0x56/0x110 [ptlrpc] [<ffffffffa077dccb>] nrs_resource_get_safe+0x8b/0x100 [ptlrpc] [<ffffffffa0780248>] ptlrpc_nrs_req_initialize+0x38/0x90 [ptlrpc] [<ffffffffa074cff0>] ptlrpc_main+0x1170/0x16f0 [ptlrpc] [<ffffffffa074be80>] ? ptlrpc_main+0x0/0x16f0 [ptlrpc] [<ffffffff8100c0ca>] child_rip+0xa/0x20 [<ffffffffa074be80>] ? ptlrpc_main+0x0/0x16f0 [ptlrpc] [<ffffffffa074be80>] ? ptlrpc_main+0x0/0x16f0 [ptlrpc] [<ffffffff8100c0c0>] ? child_rip+0x0/0x20 [picked ptlrpc part for upstream kernel submission] Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3239 Lustre-change: http://review.whamcloud.com/6204 Signed-off-by: wang di <di.wang@intel.com> Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre/clio: don't ignore layout on writebackNiu Yawei
In some cases such as kernel writeback, we shouldn't ignore the layout, otherwise, it could race with layout change undergoing. Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3160 Lustre-change: http://review.whamcloud.com/6154 Signed-off-by: Niu Yawei <yawei.niu@intel.com> Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Fan Yong <fan.yong@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre: drop CONFIG_BROKEN dependencyPeng Tao
Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03staging/lustre: remove enum config_flags and obd_mount_server.cPeng Tao
obd_mount_server.c is not really used at all, and we can remove enum config_flags that are causing symbol conflictions due to CONFIG_ prefixing... Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30Staging: csr: fix indentation style issue in bh.cDavis Abubakr-Sadik Nii Nai
This is a patch to the bh.c file that fixes up all indentation errors found the checkpatch.pl tool. Two lines beyond 80 characters are left alone to improve readability Signed-off-by: Davis Abubakr-Sadik Nii Nai <dwa2pac@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30staging: vt6656: rf.c: Remove camel case from local variablesMalcolm Priestley
Camel case changes; Static declaration abyAL2230InitTable -> al2230_init_table abyAL2230ChannelTable0 -> al2230_channel_table0 abyAL2230ChannelTable1 -> al2230_channel_table1 abyAL7230InitTable -> al7230_init_table_amode abyAL7230ChannelTable0 -> al7230_channel_table0 abyAL7230ChannelTable1 -> al7230_channel_table1 abyAL7230ChannelTable2 -> al7230_channel_table2 abyVT3226_InitTable -> at3226_init_table abyVT3226D0_InitTable -> at3226d0_init_table abyVT3226_ChannelTable0 -> vt3226_channel_table0 abyVT3226_ChannelTable1 -> vt3226_channel_table1 abyVT3342A0_InitTable -> vt3342a0_init_table abyVT3342_ChannelTable0 -> vt3342_channel_table0 abyVT3342_ChannelTable1 -> vt3342_channel_table1 Constant declaration dwVT3226D0LoCurrentTable -> vt3226d0_lo_current_table dwAL2230PowerTable -> al2230_power_table Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30staging: vt6656: rf.c: RFbRFTableDownload: Remove camel case and clean up.Malcolm Priestley
White space clean up. Camel case changes; pDevice -> priv wLength1 -> length1 wLength2 -> length2 wLength3 -> length3 pbyAddr1 -> addr1 pbyAddr2 -> addr2 pbyAddr3 -> addr3 wLength -> length wValue -> value abyArray -> array No functional changes. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30staging: vt6656: rf.c: RFvRSSITodBm Remove camel case and clean up.Malcolm Priestley
White space clean up. Camel case changes; pDevice -> priv byCurrRSSI -> rssi pldBm -> dbm byIdx -> idx abyAIROHARF -> airoharf No functional changes. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30staging: vt6656: rf.c: RFbRawSetPower Remove camel case and cleanup.Malcolm Priestley
White space clean up. Camel case changes; pDevice -> priv uRATE -> rate bResult -> ret byPwr -> power Functional change merged as one variable. dwMax7230Pwr -> power_setting dwVT3226Pwr -> power_setting dwVT3342Pwr -> power_setting Author changes moved to Revision history. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30staging: vt6656: rf.c: RFbSetPower Remove camel case and clean up.Malcolm Priestley
White space clean up. Camel case changes; pDevice -> priv uRATE -> rate uCH -> channel bResult -> ret byPwr -> power No functional changes. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30rtl8192u: fix printk calls in r8192U_core.cXenia Ragiadakou
This patch replaces calls to printk with their corresponding calls to pr_<loglevel>(fmt, ...) and netdev_<loglevel>(dev, fmt, ...), when it is applicable, to make the log messages more informative. Also, it fixes some small typos and whitespaces found in log messages. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30ozwpan: replace kfree_skb with dev_kfree_skb in ozproto.cXenia Ragiadakou
This patch replaces the calls to kfree_skb with calls to dev_kfree_skb. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30ozwpan: replace kfree_skb with dev_kfree_skb in ozpd.cXenia Ragiadakou
This patch replaces the calls to kfree_skb with calls to dev_kfree_skb. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 07:45:17 +0000