summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-07Merge tag 'sound-3.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few device-specific quirks for HD-audio and USB-audio, most of which are one-liners" * tag 'sound-3.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Add quirk for Logitech Webcam C500 ALSA: hda - Use analog beep for Thinkpads with AD1984 codecs ALSA: hda - Add missing loopback merge path for AD1884/1984 codecs ALSA: hda - add automute fix for another dell AIO model ALSA: hda - Added inverted digital-mic handling for Acer TravelMate 8371
2014-03-07Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Mostly intel and radeon fixes, one tda998x, one kconfig dep fix and two more MAINTAINERS updates, All pretty run of the mill for this stage" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/atom: select the proper number of lanes in transmitter setup MAINTAINERS: add maintainer entry for TDA998x driver drm: fix bochs kconfig dependencies drm/radeon/dpm: fix typo in EVERGREEN_SMC_FIRMWARE_HEADER_softRegisters drm/radeon/cik: fix typo in documentation drm/radeon: silence GCC warning on 32 bit drm/radeon: resume old pm late drm/radeon: TTM must be init with cpu-visible VRAM, v2 DRM: armada: fix use of kfifo_put() drm/i915: Reject >165MHz modes w/ DVI monitors drm/i915: fix assert_cursor on BDW drm/i915: vlv: reserve GT power context early drm/i915: fix pch pci device enumeration drm/i915: Resolving the memory region conflict for Stolen area drm/i915: use backlight legacy combination mode also for i915gm/i945gm MAINTAINERS: update AGP tree to point at drm tree
2014-03-07Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Small collection of fixes for 3.14-rc. It contains: - Three minor update to blk-mq from Christoph. - Reduce number of unaligned (< 4kb) in-flight writes on mtip32xx to two. From Micron. - Make the blk-mq CPU notify spinlock raw, since it can't be a sleeper spinlock on RT. From Mike Galbraith. - Drop now bogus BUG_ON() for bio iteration with blk integrity. From Nic Bellinger. - Properly propagate the SYNC flag on requests. From Shaohua" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: add REQ_SYNC early rt,blk,mq: Make blk_mq_cpu_notify_lock a raw spinlock bio-integrity: Drop bio_integrity_verify BUG_ON in post bip->bip_iter world blk-mq: support partial I/O completions blk-mq: merge blk_mq_insert_request and blk_mq_run_request blk-mq: remove blk_mq_alloc_rq mtip32xx: Reduce the number of unaligned writes to 2
2014-03-07Merge tag 'pinctrl-v3.14-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "This is a set of pin control fixes I have collected over the last few days. Some have rotated more than others in linux-next, but they were rebased on v3.14-rc5 due to sloppy commit messages. I am quite convinced that they are all good fixes that only hit this or that individual driver and not the entire subsystem. - Fix chained interrupts, interrupt masking and register offset calculation for the sunxi driver - Make MSM a bool rather than a tristate to stop build problems to happen - chained interrupt controllers cannot currently be defined in modules - Fix a clock in the PFC driver - Fix a kernel panic in the sirf driver" * tag 'pinctrl-v3.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sirf: fix kernel panic in gpio_lock_as_irq pinctrl: sh-pfc: r8a7791: SD1_CLK fix pinctrl: msm: make PINCTRL_MSM bool instead of tristate pinctrl: sunxi: Fix interrupt register offset calculation pinctrl: sunxi: Fix masking when setting irq type pinctrl: sunxi: use chained_irq_{enter, exit} for GIC compatibility
2014-03-07Merge tag 'stable/for-linus-3.14-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen fix from Konrad Rzeszutek Wilk: "This has exactly one patch for Xen ARM. It sets the dependency to compile the kernel with MMU enabled - otherwise - the guest won't work very well" * tag 'stable/for-linus-3.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: ARM: XEN depends on having a MMU
2014-03-07Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds
Pull c6x build fix from Mark Salter: "Build fix for c6x" * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: c6x: fix build failure caused by cache.h
2014-03-07dm space map metadata: fix refcount decrement below 0 which caused corruptionJoe Thornber
This has been a relatively long-standing issue that wasn't nailed down until Teng-Feng Yang's meticulous bug report to dm-devel on 3/7/2014, see: http://www.redhat.com/archives/dm-devel/2014-March/msg00021.html From that report: "When decreasing the reference count of a metadata block with its reference count equals 3, we will call dm_btree_remove() to remove this enrty from the B+tree which keeps the reference count info in metadata device. The B+tree will try to rebalance the entry of the child nodes in each node it traversed, and the rebalance process contains the following steps. (1) Finding the corresponding children in current node (shadow_current(s)) (2) Shadow the children block (issue BOP_INC) (3) redistribute keys among children, and free children if necessary (issue BOP_DEC) Since the update of a metadata block's reference count could be recursive, we will stash these reference count update operations in smm->uncommitted and then process them in a FILO fashion. The problem is that step(3) could free the children which is created in step(2), so the BOP_DEC issued in step(3) will be carried out before the BOP_INC issued in step(2) since these BOPs will be processed in FILO fashion. Once the BOP_DEC from step(3) tries to decrease the reference count of newly shadow block, it will report failure for its reference equals 0 before decreasing. It looks like we can solve this issue by processing these BOPs in a FIFO fashion instead of FILO." Commit 5b564d80 ("dm space map: disallow decrementing a reference count below zero") changed the code to report an error for this temporary refcount decrement below zero. So what was previously a harmless invalid refcount became a hard failure due to the new error path: device-mapper: space map common: unable to decrement a reference count below 0 device-mapper: thin: 253:6: dm_thin_insert_block() failed: error = -22 device-mapper: thin: 253:6: switching pool to read-only mode This bug is in dm persistent-data code that is common to the DM thin and cache targets. So any users of those targets should apply this fix. Fix this by applying recursive space map operations in FIFO order rather than FILO. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=68801 Reported-by: Apollon Oikonomopoulos <apoikos@debian.org> Reported-by: edwillam1007@gmail.com Reported-by: Teng-Feng Yang <shinrairis@gmail.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.13+
2014-03-07firewire: don't use PREPARE_DELAYED_WORKTejun Heo
PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. firewire core-device and sbp2 have been been multiplexing work items with multiple work functions. Introduce fw_device_workfn() and sbp2_lu_workfn() which invoke fw_device->workfn and sbp2_logical_unit->workfn respectively and always use the two functions as the work functions and update the users to set the ->workfn fields instead of overriding work functions using PREPARE_DELAYED_WORK(). This fixes a variety of possible regressions since a2c1c57be8d9 "workqueue: consider work function when searching for busy work items" due to which fw_workqueue lost its required non-reentrancy property. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: linux1394-devel@lists.sourceforge.net Cc: stable@vger.kernel.org # v3.9+ Cc: stable@vger.kernel.org # v3.8.2+ Cc: stable@vger.kernel.org # v3.4.60+ Cc: stable@vger.kernel.org # v3.2.40+
2014-03-07blk-mq: add REQ_SYNC earlyShaohua Li
Add REQ_SYNC early, so rq_dispatched[] in blk_mq_rq_ctx_init is set correctly. Signed-off-by: Shaohua Li<shli@fusionio.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-03-06Target/sbc: Fix sbc_copy_prot for offset scattersSagi Grimberg
When copying between device and command protection scatters we must take into account that device scatters might be offset and we might copy outside scatter range. Thus for each cmd prot scatter we must take the min between cmd prot scatter, dev prot scatter, and whats left (and loop in case we havn't copied enough from/to cmd prot scatter). Example (single t_prot_sg of len 2048): kernel: sbc_dif_copy_prot: se_cmd=ffff880380aaf970, left=2048, len=2048, dev_prot_sg_offset=3072, dev_prot_sg_len=4096 kernel: isert: se_cmd=ffff880380aaf970 PI error found type 0 at sector 0x2600 expected 0x0 vs actual 0x725f, lba=2580 Instead of copying 2048 from offset 3072 (copying junk outside sg limit 4096), we must to copy 1024 and continue to next sg until we complete cmd prot scatter. This issue was found using iSER T10-PI offload over rd_mcp (wasn't discovered with fileio since file_dev prot sglists are never offset). Changes from v1: - Fix sbc_copy_prot copy length miss-calculation Changes from v0: - Removed psg->offset consideration for psg_len computation - Removed sg->offset consideration for offset condition - Added copied consideraiton for len computation - Added copied offset to paddr when doing memcpy Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-07Merge remote-tracking branches 'spi/fix/ath79', 'spi/fix/atmel', ↵Mark Brown
'spi/fix/coldfire', 'spi/fix/fsl-dspi', 'spi/fix/imx' and 'spi/fix/topcliff-pch' into spi-linus
2014-03-07powerpc: Align p_dyn, p_rela and p_st symbolsAnton Blanchard
The 64bit relocation code places a few symbols in the text segment. These symbols are only 4 byte aligned where they need to be 8 byte aligned. Add an explicit alignment. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-07powerpc/tm: Fix crash when forking inside a transactionMichael Neuling
When we fork/clone we currently don't copy any of the TM state to the new thread. This results in a TM bad thing (program check) when the new process is switched in as the kernel does a tmrechkpt with TEXASR FS not set. Also, since R1 is from userspace, we trigger the bad kernel stack pointer detection. So we end up with something like this: Bad kernel stack pointer 0 at c0000000000404fc cpu 0x2: Vector: 700 (Program Check) at [c00000003ffefd40] pc: c0000000000404fc: restore_gprs+0xc0/0x148 lr: 0000000000000000 sp: 0 msr: 9000000100201030 current = 0xc000001dd1417c30 paca = 0xc00000000fe00800 softe: 0 irq_happened: 0x01 pid = 0, comm = swapper/2 WARNING: exception is not recoverable, can't continue The below fixes this by flushing the TM state before we copy the task_struct to the clone. To do this we go through the tmreclaim patch, which removes the checkpointed registers from the CPU and transitions the CPU out of TM suspend mode. Hence we need to call tmrechkpt after to restore the checkpointed state and the TM mode for the current task. To make this fail from userspace is simply: tbegin li r0, 2 sc <boom> Kudos to Adhemerval Zanella Neto for finding this. Signed-off-by: Michael Neuling <mikey@neuling.org> cc: Adhemerval Zanella Neto <azanella@br.ibm.com> cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-07Merge branch 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes one more radeon fix. * 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/atom: select the proper number of lanes in transmitter setup
2014-03-06drm/radeon/atom: select the proper number of lanes in transmitter setupAlex Deucher
We need to check for DVI vs. HDMI when setting up duallink since HDMI is single link only. Fixes 4k modes on newer asics. bug: https://bugs.freedesktop.org/show_bug.cgi?id=75223 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-03-07MAINTAINERS: add maintainer entry for TDA998x driverRussell King
Add a maintainers entry for the TDA998x driver. Rob Clark has handed this driver over to me to look after. Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-07drm: fix bochs kconfig dependenciesGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-07Merge branch 'drm-armada-fixes' of ↵Dave Airlie
git://ftp.arm.linux.org.uk/~rmk/linux-cubox into drm-fixes fix for kfifo api change. * 'drm-armada-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: DRM: armada: fix use of kfifo_put()
2014-03-07Merge branch 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes a few more radeon fixes. * 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/dpm: fix typo in EVERGREEN_SMC_FIRMWARE_HEADER_softRegisters drm/radeon/cik: fix typo in documentation drm/radeon: silence GCC warning on 32 bit drm/radeon: resume old pm late drm/radeon: TTM must be init with cpu-visible VRAM, v2
2014-03-06drm/radeon/dpm: fix typo in EVERGREEN_SMC_FIRMWARE_HEADER_softRegistersAlex Deucher
Should be at 0x8 rather than 0. fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60523 Noticed by ArtForz on #radeon Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-03-06drm/radeon/cik: fix typo in documentationAlex Deucher
Copy-paste typo. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-03-06drm/radeon: silence GCC warning on 32 bitPaul Bolle
Building radeon_ttm.o on 32 bit x86 triggers a warning: In file included from include/asm-generic/bug.h:13:0, from [...]/arch/x86/include/asm/bug.h:38, from include/linux/bug.h:4, from include/drm/drm_mm.h:39, from include/drm/drm_vma_manager.h:26, from include/drm/ttm/ttm_bo_api.h:35, from drivers/gpu/drm/radeon/radeon_ttm.c:32: drivers/gpu/drm/radeon/radeon_ttm.c: In function 'radeon_ttm_gtt_read': include/linux/kernel.h:712:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&_min1 == &_min2); \ ^ drivers/gpu/drm/radeon/radeon_ttm.c:938:22: note: in expansion of macro 'min' ssize_t cur_size = min(size, PAGE_SIZE - off); ^ Silence this warning by using min_t(). Since cur_size will never be negative and its upper bound is PAGE_SIZE, we can change its type to size_t and use min_t(size_t, [...]) here. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2014-03-06drm/radeon: resume old pm lateAlex Deucher
Moving the pm resume up in the init order to fix dpm seems to have regressed somes cases with the old pm code. Move it back to late resume. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-03-06drm/radeon: TTM must be init with cpu-visible VRAM, v2Lauri Kasanen
Without this, a bo may get created in the cpu-inaccessible vram. Before the CP engines get setup, all copies are done via cpu memcpy. This means that the cpu tries to read from inaccessible memory, fails, and the radeon module proceeds to disable acceleration. Doing this has no downsides, as the real VRAM size gets set as soon as the CP engines get init. This is a candidate for 3.14 fixes. v2: Add comment on why the function is used Signed-off-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
2014-03-06firewire: ohci: fix probe failure with Agere/LSI controllersStefan Richter
Since commit bd972688eb24 "firewire: ohci: Fix 'failed to read phy reg' on FW643 rev8", there is a high chance that firewire-ohci fails to initialize LSI née Agere controllers. https://bugzilla.kernel.org/show_bug.cgi?id=65151 Peter Hurley points out the reason: IEEE 1394a:2000 clause 5A.1 (or IEEE 1394:2008 clause 17.2.1) say: "The PHY shall insure that no more than 10 ms elapse from the reassertion of LPS until the interface is reset. The link shall not assert LReq until the reset is complete." In other words, the link needs to give the PHY at least 10 ms to get the interface operational. With just the msleep(1) in bd972688eb24, the first read_phy_reg() during ohci_enable() may happen before the phy-link interface reset was finished, and fail. Due to the high variability of msleep(n) with small n, this failure was not fully reproducible, and not apparent at all with low CONFIG_HZ setting. On the other hand, Peter can no longer reproduce the issue with FW643 rev8. The read phy reg failures that happened back then may have had an unrelated cause. So, just revert bd972688eb24, except for the valid comment on TSB82AA2 cards. Reported-by: Mikhail Gavrilov Reported-by: Jay Fenlason <fenlason@redhat.com> Reported-by: Clemens Ladisch <clemens@ladisch.de> Reported-by: Peter Hurley <peter@hurleysoftware.com> Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-03-06dm thin: fix Documentation for held metadata root featureMike Snitzer
The Documentation for the thin provisioning target's held metadata root feature was incorrect. It is now available and the value for the held metadata root is in block units (not 512b sectors). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-03-06x86, trace: Further robustify CR2 handling vs tracingPeter Zijlstra
Building on commit 0ac09f9f8cd1 ("x86, trace: Fix CR2 corruption when tracing page faults") this patch addresses another few issues: - Now that read_cr2() is lifted into trace_do_page_fault(), we should pass the address to trace_page_fault_entries() to avoid it re-reading a potentially changed cr2. - Put both trace_do_page_fault() and trace_page_fault_entries() under CONFIG_TRACING. - Mark both fault entry functions {,trace_}do_page_fault() as notrace to avoid getting __mcount or other function entry trace callbacks before we've observed CR2. - Mark __do_page_fault() as noinline to guarantee the function tracer does get to see the fault. Cc: <jolsa@redhat.com> Cc: <vincent.weaver@maine.edu> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140306145300.GO9987@twins.programming.kicks-ass.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-03-06ACPI / EC: Clear stale EC events on Samsung systemsKieran Clancy
A number of Samsung notebooks (530Uxx/535Uxx/540Uxx/550Pxx/900Xxx/etc) continue to log events during sleep (lid open/close, AC plug/unplug, battery level change), which accumulate in the EC until a buffer fills. After the buffer is full (tests suggest it holds 8 events), GPEs stop being triggered for new events. This state persists on wake or even on power cycle, and prevents new events from being registered until the EC is manually polled. This is the root cause of a number of bugs, including AC not being detected properly, lid close not triggering suspend, and low ambient light not triggering the keyboard backlight. The bug also seemed to be responsible for performance issues on at least one user's machine. Juan Manuel Cabo found the cause of bug and the workaround of polling the EC manually on wake. The loop which clears the stale events is based on an earlier patch by Lan Tianyu (see referenced attachment). This patch: - Adds a function acpi_ec_clear() which polls the EC for stale _Q events at most ACPI_EC_CLEAR_MAX (currently 100) times. A warning is logged if this limit is reached. - Adds a flag EC_FLAGS_CLEAR_ON_RESUME which is set to 1 if the DMI system vendor is Samsung. This check could be replaced by several more specific DMI vendor/product pairs, but it's likely that the bug affects more Samsung products than just the five series mentioned above. Further, it should not be harmful to run acpi_ec_clear() on systems without the bug; it will return immediately after finding no data waiting. - Runs acpi_ec_clear() on initialisation (boot), from acpi_ec_add() - Runs acpi_ec_clear() on wake, from acpi_ec_unblock_transactions() References: https://bugzilla.kernel.org/show_bug.cgi?id=44161 References: https://bugzilla.kernel.org/show_bug.cgi?id=45461 References: https://bugzilla.kernel.org/show_bug.cgi?id=57271 References: https://bugzilla.kernel.org/attachment.cgi?id=126801 Suggested-by: Juan Manuel Cabo <juanmanuel.cabo@gmail.com> Signed-off-by: Kieran Clancy <clancy.kieran@gmail.com> Reviewed-by: Lan Tianyu <tianyu.lan@intel.com> Reviewed-by: Dennis Jansen <dennis.jansen@web.de> Tested-by: Kieran Clancy <clancy.kieran@gmail.com> Tested-by: Juan Manuel Cabo <juanmanuel.cabo@gmail.com> Tested-by: Dennis Jansen <dennis.jansen@web.de> Tested-by: Maurizio D'Addona <mauritiusdadd@gmail.com> Tested-by: San Zamoyski <san@plusnet.pl> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-06cpufreq: Initialize governor for a new policy under policy->rwsemViresh Kumar
policy->rwsem is used to lock access to all parts of code modifying struct cpufreq_policy, but it's not used on a new policy created by __cpufreq_add_dev(). Because of that, if cpufreq_update_policy() is called in a tight loop on one CPU in parallel with offline/online of another CPU, then the following crash can be triggered: Unable to handle kernel NULL pointer dereference at virtual address 00000020 pgd = c0003000 [00000020] *pgd=80000000004003, *pmd=00000000 Internal error: Oops: 206 [#1] PREEMPT SMP ARM PC is at __cpufreq_governor+0x10/0x1ac LR is at cpufreq_update_policy+0x114/0x150 ---[ end trace f23a8defea6cd706 ]--- Kernel panic - not syncing: Fatal exception CPU0: stopping CPU: 0 PID: 7136 Comm: mpdecision Tainted: G D W 3.10.0-gd727407-00074-g979ede8 #396 [<c0afe180>] (notifier_call_chain+0x40/0x68) from [<c02a23ac>] (__blocking_notifier_call_chain+0x40/0x58) [<c02a23ac>] (__blocking_notifier_call_chain+0x40/0x58) from [<c02a23d8>] (blocking_notifier_call_chain+0x14/0x1c) [<c02a23d8>] (blocking_notifier_call_chain+0x14/0x1c) from [<c0803c68>] (cpufreq_set_policy+0xd4/0x2b8) [<c0803c68>] (cpufreq_set_policy+0xd4/0x2b8) from [<c0803e7c>] (cpufreq_init_policy+0x30/0x98) [<c0803e7c>] (cpufreq_init_policy+0x30/0x98) from [<c0805a18>] (__cpufreq_add_dev.isra.17+0x4dc/0x7a4) [<c0805a18>] (__cpufreq_add_dev.isra.17+0x4dc/0x7a4) from [<c0805d38>] (cpufreq_cpu_callback+0x58/0x84) [<c0805d38>] (cpufreq_cpu_callback+0x58/0x84) from [<c0afe180>] (notifier_call_chain+0x40/0x68) [<c0afe180>] (notifier_call_chain+0x40/0x68) from [<c02812dc>] (__cpu_notify+0x28/0x44) [<c02812dc>] (__cpu_notify+0x28/0x44) from [<c0aeed90>] (_cpu_up+0xf4/0x1dc) [<c0aeed90>] (_cpu_up+0xf4/0x1dc) from [<c0aeeed4>] (cpu_up+0x5c/0x78) [<c0aeeed4>] (cpu_up+0x5c/0x78) from [<c0aec808>] (store_online+0x44/0x74) [<c0aec808>] (store_online+0x44/0x74) from [<c03a40f4>] (sysfs_write_file+0x108/0x14c) [<c03a40f4>] (sysfs_write_file+0x108/0x14c) from [<c03517d4>] (vfs_write+0xd0/0x180) [<c03517d4>] (vfs_write+0xd0/0x180) from [<c0351ca8>] (SyS_write+0x38/0x68) [<c0351ca8>] (SyS_write+0x38/0x68) from [<c0205de0>] (ret_fast_syscall+0x0/0x30) Fix that by taking locks at appropriate places in __cpufreq_add_dev() as well. Reported-by: Saravana Kannan <skannan@codeaurora.org> Suggested-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-06cpufreq: Initialize policy before making it available for others to useViresh Kumar
Policy must be fully initialized before it is being made available for use by others. Otherwise cpufreq_cpu_get() would be able to grab a half initialized policy structure that might not have affected_cpus (for example) populated. Then, anybody accessing those fields will get a wrong value and that will lead to unpredictable results. In order to fix this, do all the necessary initialization before we make the policy structure available via cpufreq_cpu_get(). That will guarantee that any code accessing fields of the policy will get correct data from them. Reported-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-06cpufreq: use cpufreq_cpu_get() to avoid cpufreq_get() race conditionsAaron Plattner
If a module calls cpufreq_get while cpufreq is initializing, it's possible for it to be called after cpufreq_driver is set but before cpufreq_cpu_data is written during subsys_interface_register. This happens because cpufreq_get doesn't take the cpufreq_driver_lock around its use of cpufreq_cpu_data. Fix this by using cpufreq_cpu_get(cpu) to look up the policy rather than reading it out of cpufreq_cpu_data directly. cpufreq_cpu_get() takes the appropriate locks to prevent this race from happening. Since it's possible for policy to be NULL if the caller passes in an invalid CPU number or calls the function before cpufreq is initialized, delete the BUG_ON(!policy) and simply return 0. Don't try to return -ENOENT because that's negative and the function returns an unsigned integer. References: https://bbs.archlinux.org/viewtopic.php?id=177934 Signed-off-by: Aaron Plattner <aplattner@nvidia.com> Cc: 3.13+ <stable@vger.kernel.org> # 3.13+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-05clk: shmobile: rcar-gen2: Use kick bit to allow Z clock frequency changeBenoit Cousson
The Z clock frequency change is effective only after setting the kick bit located in the FRQCRB register. Without that, the CA15 CPUs clock rate will never change. Fix that by checking if the kick bit is cleared and enable it to make the clock rate change effective. The bit is cleared automatically upon completion. Signed-off-by: Benoit Cousson <bcousson+renesas@baylibre.com> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-05dm thin: fix noflush suspend IO queueingJoe Thornber
i) by the time DM core calls the postsuspend hook the dm_noflush flag has been cleared. So the old thin_postsuspend did nothing. We need to use the presuspend hook instead. ii) There was a race between bios leaving DM core and arriving in the deferred queue. thin_presuspend now sets a 'requeue' flag causing all bios destined for that thin to be requeued back to DM core. Then it requeues all held IO, and all IO on the deferred queue (destined for that thin). Finally postsuspend clears the 'requeue' flag. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-03-05dm thin: fix deadlock in __requeue_bio_listJoe Thornber
The spin lock in requeue_io() was held for too long, allowing deadlock. Don't worry, due to other issues addressed in the following "dm thin: fix noflush suspend IO queueing" commit, this code was never called. Fix this by taking the spin lock for a much shorter period of time. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-03-05dm thin: fix out of data space handlingJoe Thornber
Ideally a thin pool would never run out of data space; the low water mark would trigger userland to extend the pool before we completely run out of space. However, many small random IOs to unprovisioned space can consume data space at an alarming rate. Adjust your low water mark if you're frequently seeing "out-of-data-space" mode. Before this fix, if data space ran out the pool would be put in PM_READ_ONLY mode which also aborted the pool's current metadata transaction (data loss for any changes in the transaction). This had a side-effect of needlessly compromising data consistency. And retry of queued unserviceable bios, once the data pool was resized, could initiate changes to potentially inconsistent pool metadata. Now when the pool's data space is exhausted transition to a new pool mode (PM_OUT_OF_DATA_SPACE) that allows metadata to be changed but data may not be allocated. This allows users to remove thin volumes or discard data to recover data space. The pool is no longer put in PM_READ_ONLY mode in response to the pool running out of data space. And PM_READ_ONLY mode no longer aborts the pool's current metadata transaction. Also, set_pool_mode() will now notify userspace when the pool mode is changed. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-03-05dm thin: ensure user takes action to validate data and metadata consistencyMike Snitzer
If a thin metadata operation fails the current transaction will abort, whereby causing potential for IO layers up the stack (e.g. filesystems) to have data loss. As such, set THIN_METADATA_NEEDS_CHECK_FLAG in the thin metadata's superblock which: 1) requires the user verify the thin metadata is consistent (e.g. use thin_check, etc) 2) suggests the user verify the thin data is consistent (e.g. use fsck) The only way to clear the superblock's THIN_METADATA_NEEDS_CHECK_FLAG is to run thin_repair. On metadata operation failure: abort current metadata transaction, set pool in read-only mode, and now set the needs_check flag. As part of this change, constraints are introduced or relaxed: * don't allow a pool to transition to write mode if needs_check is set * don't allow data or metadata space to be resized if needs_check is set * if a thin pool's metadata space is exhausted: the kernel will now force the user to take the pool offline for repair before the kernel will allow the metadata space to be extended. Also, update Documentation to include information about when the thin provisioning target commits metadata, how it handles metadata failures and running out of space. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com>
2014-03-05NFSv4: Fail the truncate() if the lock/open stateid is invalidTrond Myklebust
If the open stateid could not be recovered, or the file locks were lost, then we should fail the truncate() operation altogether. Reported-by: Andy Adamson <andros@netapp.com> Link: http://lkml.kernel.org/r/1393954269-3974-1-git-send-email-andros@netapp.com Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-03-05NFSv4.1 Fail data server I/O if stateid represents a lost lockAndy Adamson
Signed-off-by: Andy Adamson <andros@netapp.com> Link: http://lkml.kernel.org/r/1393954269-3974-1-git-send-email-andros@netapp.com Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-03-05NFSv4: Fix the return value of nfs4_select_rw_stateidTrond Myklebust
In commit 5521abfdcf4d6 (NFSv4: Resend the READ/WRITE RPC call if a stateid change causes an error), we overloaded the return value of nfs4_select_rw_stateid() to cause it to return -EWOULDBLOCK if an RPC call is outstanding that would cause the NFSv4 lock or open stateid to change. That is all redundant when we actually copy the stateid used in the read/write RPC call that failed, and check that against the current stateid. It is doubly so, when we consider that in the NFSv4.1 case, we also set the stateid's seqid to the special value '0', which means 'match the current valid stateid'. Reported-by: Andy Adamson <andros@netapp.com> Link: http://lkml.kernel.org/r/1393954269-3974-1-git-send-email-andros@netapp.com Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-03-05NFSv4: nfs4_stateid_is_current should return 'true' for an invalid stateidTrond Myklebust
When nfs4_set_rw_stateid() can fails by returning EIO to indicate that the stateid is completely invalid, then it makes no sense to have it trigger a retry of the READ or WRITE operation. Instead, we should just have it fall through and attempt a recovery. This fixes an infinite loop in which the client keeps replaying the same bad stateid back to the server. Reported-by: Andy Adamson <andros@netapp.com> Link: http://lkml.kernel.org/r/1393954269-3974-1-git-send-email-andros@netapp.com Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-03-05ALSA: usb-audio: Add quirk for Logitech Webcam C500Takashi Iwai
Logitech C500 (046d:0807) needs the same workaround like other Logitech Webcams. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-05ALSA: hda - Use analog beep for Thinkpads with AD1984 codecsTakashi Iwai
For making the driver behavior compatible with the earlier kernels, use the analog beep in the loopback path instead of the digital beep. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-05ALSA: hda - Add missing loopback merge path for AD1884/1984 codecsTakashi Iwai
The mixer widget (NID 0x20) of AD1884 and AD1984 codecs isn't connected directly to the actual I/O paths but only via another mixer widget (NID 0x21). We need a similar fix as we did for AD1882. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-05pinctrl: sirf: fix kernel panic in gpio_lock_as_irqBarry Song
commit 655dada6277991 causes kernel panic, this patch fixes it. [ 1.197816] [ffffffee] *pgd=0d7fd821, *pte=00000000, *ppte=00000000 [ 1.204070] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 1.209447] Modules linked in: [ 1.212490] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1 #3 [ 1.218737] task: cd03c000 ti: cd040000 task.ti: cd040000 [ 1.224127] PC is at gpiod_lock_as_irq+0xc/0x64 [ 1.228634] LR is at sirfsoc_gpio_irq_startup+0x18/0x44 [ 1.233842] pc : [<c01d3990>] lr : [<c01d1c38>] psr: a0000193 [ 1.233842] sp : cd041d30 ip : 00000000 fp : 00000000 [ 1.245296] r10: 00000000 r9 : cd023db4 r8 : 60000113 [ 1.250505] r7 : 0000003e r6 : cd023dd4 r5 : c06bfa54 r4 : cd023d80 [ 1.257014] r3 : 00000020 r2 : 00000000 r1 : ffffffea r0 : ffffffea [ 1.263526] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.270903] Control: 10c53c7d Table: 00004059 DAC: 00000015 [ 1.276631] Process swapper/0 (pid: 1, stack limit = 0xcd040240) [ 1.282620] Stack: (0xcd041d30 to 0xcd042000) [ 1.286963] 1d20: cd023d80 c01d1c38 c01d1c20 cd023d80 [ 1.295124] 1d40: 00000001 c0068438 cd023d80 ccb6d880 cd023dd4 c0067044 0000718e c006719c [ 1.286963] 1d20: cd023d80 c01d1c38 c01d1c20 cd023d80 [ 1.295124] 1d40: 00000001 c0068438 cd023d80 ccb6d880 cd023dd4 c0067044 0000718e c006719c [ 1.295124] 1d40: 00000001 c0068438 cd023d80 ccb6d880 cd023dd4 c0067044 0000718e c006719c [ 1.303283] 1d60: 00000800 00000083 ccb6d880 cd023d80 c02b41d8 00000083 0000003e ccb7c410 [ 1.311442] 1d80: 00000000 c00671dc 00000083 0000003e c02b41d8 cd3dd5c0 0000003e ccb7c634 [ 1.319601] 1da0: cd040030 c00672a8 cd3dd5c0 ccb7c410 ccb6d340 ccb7c410 ccb6d340 cd3dd400 [ 1.327760] 1dc0: cd3dd410 c02b4434 ccb7c410 c01265a8 00000001 cd3dd410 c0687108 00000000 [ 1.335919] 1de0: c0687108 00000000 00000000 c0240170 c0240158 cd3dd410 c06c30d0 c023e8bc [ 1.344079] 1e00: c023e9d4 00000000 cd3dd410 c023e9d4 c0682150 c023cf88 cd003e98 cd2d50c4 [ 1.352238] 1e20: cd3dd410 cd3dd444 c06822f0 c023e768 cd3dd418 cd3dd410 c06822f0 c023de14 [ 1.360397] 1e40: cd3dd418 00000000 cd3dd410 c023c398 cd041e78 cd041ea8 cd3dd400 cd3dd410 [ 1.368556] 1e60: 00000083 00000000 cd3dd400 cd3dd410 00000083 000000c8 c04e00c8 c023fee8 [ 1.376715] 1e80: 00000000 cd041ea8 cd3dd400 00000001 00000083 c024048c c0435ef8 c0434dec [ 1.384874] 1ea0: c068da58 c04c6d04 c0682150 c0435ef8 ffffffff 00000000 00000000 c068da58 [ 1.393033] 1ec0: 00000020 00000000 00000000 00000000 c05dabb8 00000007 c068d640 c068d640 [ 1.401193] 1ee0: c04c247c c04c249c 00000000 c00088e8 cd004c00 c043bbb8 cd029180 c03812a0 [ 1.409352] 1f00: 00000000 00000000 60000113 c0673728 60000113 c0673728 00000000 00000000 [ 1.417511] 1f20: cd7fce01 c0390a54 00000065 c003a81c c049e8bc 00000007 cd7fce0e 00000007 [ 1.425670] 1f40: 00000000 c05dabb8 00000007 c068d640 c068d640 c04c050c c04e00c8 00000065 [ 1.433829] 1f60: c04e00c0 c04c0c54 00000007 00000007 c04c050c c037d8fc cd03c000 c004322c [ 1.441988] 1f80: c0662b40 0000d640 c03737c0 00000000 00000000 00000000 00000000 00000000 [ 1.450147] 1fa0: 00000000 c03737cc 00000000 c000e478 00000000 00000000 00000000 00000000 [ 1.458307] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.466467] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 0002d481 05014092 [ 1.474640] [<c01d3990>] (gpiod_lock_as_irq) from [<c01d1c38>] (sirfsoc_gpio_irq_startup+0x18/0x44) [ 1.483661] [<c01d1c38>] (sirfsoc_gpio_irq_startup) from [<c0068438>] (irq_startup+0x34/0x6c) [ 1.492163] [<c0068438>] (irq_startup) from [<c0067044>] (__setup_irq+0x450/0x4b8) [ 1.499714] [<c0067044>] (__setup_irq) from [<c00671dc>] (request_threaded_irq+0xa8/0x128) [ 1.507960] [<c00671dc>] (request_threaded_irq) from [<c00672a8>] (request_any_context_irq+0x4c/0x7c) [ 1.517164] [<c00672a8>] (request_any_context_irq) from [<c02b4434>] (gpio_extcon_probe+0x144/0x1d4) [ 1.526279] [<c02b4434>] (gpio_extcon_probe) from [<c0240170>] (platform_drv_probe+0x18/0x48) [ 1.534783] [<c0240170>] (platform_drv_probe) from [<c023e8bc>] (driver_probe_device+0x120/0x238) [ 1.543641] [<c023e8bc>] (driver_probe_device) from [<c023cf88>] (bus_for_each_drv+0x58/0x8c) [ 1.552143] [<c023cf88>] (bus_for_each_drv) from [<c023e768>] (device_attach+0x74/0x88) [ 1.560126] [<c023e768>] (device_attach) from [<c023de14>] (bus_probe_device+0x84/0xa8) [ 1.568113] [<c023de14>] (bus_probe_device) from [<c023c398>] (device_add+0x440/0x520) [ 1.576012] [<c023c398>] (device_add) from [<c023fee8>] (platform_device_add+0xb4/0x214) [ 1.584084] [<c023fee8>] (platform_device_add) from [<c024048c>] (platform_device_register_full+0xb8/0xdc) [ 1.593719] [<c024048c>] (platform_device_register_full) from [<c04c6d04>] (sirfsoc_init_late+0xec/0xf4) [ 1.603185] [<c04c6d04>] (sirfsoc_init_late) from [<c04c249c>] (init_machine_late+0x20/0x28) [ 1.611603] [<c04c249c>] (init_machine_late) from [<c00088e8>] (do_one_initcall+0xf8/0x144) [ 1.619934] [<c00088e8>] (do_one_initcall) from [<c04c0c54>] (kernel_init_freeable+0x13c/0x1dc) [ 1.628620] [<c04c0c54>] (kernel_init_freeable) from [<c03737cc>] (kernel_init+0xc/0x118) Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-05Merge tag 'drm-intel-fixes-2014-03-04' of ↵Dave Airlie
ssh://git.freedesktop.org/git/drm-intel into drm-fixes Small fixes all around, mostly stable material. Please pull. * tag 'drm-intel-fixes-2014-03-04' of ssh://git.freedesktop.org/git/drm-intel: drm/i915: Reject >165MHz modes w/ DVI monitors drm/i915: fix assert_cursor on BDW drm/i915: vlv: reserve GT power context early drm/i915: fix pch pci device enumeration drm/i915: Resolving the memory region conflict for Stolen area drm/i915: use backlight legacy combination mode also for i915gm/i945gm
2014-03-05spi: atmel: add missing spi_master_{resume,suspend} calls to PM callbacksWenyou Yang
The PM callbacks implemented by the spi-atmel driver don't call spi_master_{resume,suspend}, fix that. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05spi: coldfire-qspi: Fix getting correct address for *mcfqspiAxel Lin
dev_get_drvdata() returns the address of master rather than mcfqspi. Fixes: af361079 (spi/coldfire-qspi: Drop extra calls to spi_master_get in suspend/resume functions) Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-03-05spi: fsl-dspi: Fix getting correct address for masterAxel Lin
Current code set platform drvdata to dspi. However, the code in dspi_suspend() and dspi_resume() assumes the drvdata is the address of master. Fix it by setting platform drvdata to master. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-03-05pinctrl: sh-pfc: r8a7791: SD1_CLK fixMagnus Damm
Fix the SD1_CLK handling for r8a7791. Without this patch it is impossible to request all pins needed for SDHI1 on the Koelsch board. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-05pinctrl: msm: make PINCTRL_MSM bool instead of tristateJosh Cartwright
Modular builds of pinctrl-msm break due to handle_bad_irq being unexported for module use. For now, make PINCTRL_MSM 'bool'. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-04 13:20:47 +0000