summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-27staging: erofs: compressed_pages should not be accessed again after freedGao Xiang
This patch resolves the following page use-after-free issue, z_erofs_vle_unzip: ... for (i = 0; i < nr_pages; ++i) { ... z_erofs_onlinepage_endio(page); (1) } for (i = 0; i < clusterpages; ++i) { page = compressed_pages[i]; if (page->mapping == mngda) (2) continue; /* recycle all individual staging pages */ (void)z_erofs_gather_if_stagingpage(page_pool, page); (3) WRITE_ONCE(compressed_pages[i], NULL); } ... After (1) is executed, page is freed and could be then reused, if compressed_pages is scanned after that, it could fall info (2) or (3) by mistake and that could finally be in a mess. This patch aims to solve the above issue only with little changes as much as possible in order to make the fix backport easier. Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support") Cc: <stable@vger.kernel.org> # 4.19+ Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: fsl-dpaa2: ethsw: Add missing netdevice checkFlorian Fainelli
port_switchdev_event() does not check that the target network device is actually backed by the ethsw driver, this could be problematic in a stacked environment case. Fixes: 44baaa43d7cc ("staging: fsl-dpaa2/ethsw: Add Freescale DPAA2 Ethernet Switch driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: rtl8188eu: cleanup comparsions to NULL in rtl8188eu_xmit.cMichael Straube
Use !x instead of x == NULL. Reported by checkpatch. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: rtl8188eu: add spaces around '*' in rtl8188e_cmd.cMichael Straube
Add spaces around '*' to follow kernel coding style. Reported by checkpatch. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: rtl8188eu: remove unused function declarationsMichael Straube
There are no definitions of odm_DIGbyRSSI_LPS(), ODM_PhyStatusQuery() and ODM_MacStatusQuery() in the driver code. So remove the unused declarations from the headers odm.h and odm_hwconfig.h. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: rtl8188eu: remove blank line between declarationsMichael Straube
Remove unnecessary blank line between declarations. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: rtl8188eu: cleanup declarations in rtl8188e_cmd.cMichael Straube
Replace tabs with spaces in declarations to cleanup whitespace. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: erofs: switch to ->iterate_shared()Gao Xiang
After commit 6192269444eb ("introduce a parallel variant of ->iterate()"), readdir can be done without taking exclusive inode lock of course. Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: rtl8188eu: remove unnecessary parentheses in rtl8188e_cmd.cMichael Straube
Remove unnecessary parentheses reported by checkpatch. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: erofs: no need to take page lock in readdirGao Xiang
VFS will take inode_lock for readdir, therefore no need to take page lock in readdir at all just as the majority of other generic filesystems. Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: speakup: Note that simple_strtoul can't simply be replaced by kstrtoulSamuel Thibault
We often receive patches which erroneously try to use kstrtoul in these places. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: comedi: ni_tio: Allocate shadow regs for each counter chipIan Abbott
The "ni_tio" module contains code to allocate, destroy and operate on a `struct ni_gpct_device`, which represents a number of counters spread over one or more blocks (or "chips"). `struct ni_gpct_device` includes an array member `regs` holding shadow copies of register values. Unfortunately, this is currently shared by each block of counters so they interfere with each other. This is a problem for the "ni_660x" module, which has 8 counters spread over 2 blocks. The `regs` storage needs to be two-dimensional, indexed by block (chip) number and register number. (It does not need to be three-dimensional because the registers for individual counters are intermingled within the block.) Change the `regs` member to an array pointer that can be indexed like a two-dimensional array to access the shadow storage for each register in each block. Allocate the storage in `ni_gpct_device_construct()` and free it in `ni_gpct_device_destroy()`. (`ni_gpct_device_construct()` can determine the number of blocks from the `num_counters` and `counters_per_chip` parameters.) Add new member `num_chips` to hold the number of chips. Use that to check that `chip_index` value is in range in the same places that check the register offset is in range. Remove the `counters_per_chip` member of `struct ni_gpct_device` as it is not needed anywhere and could be easily derived from the `num_counters` and `num_chips` members if required. Thanks to GitHub user "raabej" (real name unknown) for an initial implementation of this in the out-of-tree fork of the Comedi drivers. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: android: ashmem: Avoid range_alloc() allocation with ashmem_mutex held.Tetsuo Handa
ashmem_pin() is calling range_shrink() without checking whether range_alloc() succeeded. Also, doing memory allocation with ashmem_mutex held should be avoided because ashmem_shrink_scan() tries to hold it. Therefore, move memory allocation for range_alloc() to ashmem_pin_unpin() and make range_alloc() not to fail. This patch is mostly meant for backporting purpose for fuzz testing on stable/distributor kernels, for there is a plan to remove this code in near future. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable@vger.kernel.org Reviewed-by: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: wilc1000: fix incorrent type assignmentBo YU
Fix sparse warning: drivers/staging/wilc1000/host_interface.c:450:30: warning: incorrect type in assignment (different base types) drivers/staging/wilc1000/host_interface.c:450:30: expected restricted __le16 [usertype] beacon_period drivers/staging/wilc1000/host_interface.c:450:30: got unsigned short [usertype] beacon_interval drivers/staging/wilc1000/host_interface.c:451:25: warning: incorrect type in assignment (different base types) drivers/staging/wilc1000/host_interface.c:451:25: expected restricted __le16 [usertype] cap_info drivers/staging/wilc1000/host_interface.c:451:25: got unsigned short [usertype] capability Signed-off-by: Bo YU <tsu.yubo@gmail.com> Reviewed-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: greybus: Alignment should match open parenthesisBhanusree Pola
Clean checkpatch.pl issue in various files: CHECK: Alignment should match open parenthesis Adjust parameters to match alignment with open paranthesis Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: greybus: Blank lines not required before '}'Bhanusree Pola
Remove blank line to resolve checkpatch.pl issue: CHECK: Blank lines aren't necessary before a close brace '}' Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: greybus: Do not use multiple blank linesBhanusree Pola
Remove unnecessary blank line issue found with checkpatch.pl: CHECK: Please don't use multiple blank lines Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: ks7010: Match alignments with open parenthesisBhanusree Pola
Adjust parameters of "netdev_dbg" to match alignment with open parenthesis. Issue found using checkpatch.pl Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: vt6655: Alignment should match open parenthesisMadhumitha Prabakaran
Fix the check to improve readibility. CHECK: Alignment should match open parenthesis Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: fwserial: Add blank line after declarationsBhanusree Pola
Add blank line after the structure declaration, struct fwtty_port *port = tty->driver_data; Issue found using checkpatch.pl Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: fbtft: Fix line over 80 charactersBhanusree Pola
Fix the checkpatch.pl warning: WARNING:line over 80 characters Move Parameters to the next lines with proper alignment Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: fbtft: Extra blank line not required before '}'Bhanusree Pola
Remove unnecesessary extra blank line before the closing brace, to solve the checkpatch.pl check: CHECK: Extra blank line not required before closing brace '}' Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: fbtft: Alignment should match open parenthesisBhanusree Pola
Clear the warning found by checkpatch.pl WARNING:Alignment should match open parenthesis Adjust paremeters in fbtft_par_dbg and write_reg. Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: netlogic: Remove boilerplate license textBhagyashri Dighole
Removes the boilerplate license text. Signed-off-by: Bhagyashri Dighole <digholebhagyashri@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: netlogic: Add SPDX-License-Identifier tag at the topBhagyashri Dighole
Adds the SPDX GPL-2.0 or BSD-2-clause license identifier, which solves the checkpatch.pl warnings: "WARNING: Missing or malformed SPDX-License-Identifier tag in line 1". Signed-off-by: Bhagyashri Dighole <digholebhagyashri@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: netlogic: Modify coding style alignmentsBhagyashri Dighole
Fix coding style alignment issues detected by checkpatch.pl Match alignments with parenthesis. Limit lines to 80 characters. Signed-off-by: Bhagyashri Dighole <digholebhagyashri@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: mt761-dma: Alignment should match open parenthesisBhanusree Pola
Adjust "dev_dbg" parameters to match alignment with open parenthesis Issue found with checkpatch.pl Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: mt7621_dma: Prefer unsigned int over just unsignedBhanusree Pola
Replace 'unsigned' with 'unsigned int' to be specific with data type. Issue found with checkpatch.pl Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-21staging: octeon-usb: fix misspelled "re-enable"Sumit Pundir
Fixes misspelled "re-enable" in comment. Reported by checkpatch.pl Signed-off-by: Sumit Pundir <pundirsumit11@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-21staging: rtlwifi: Use proper enum for return in halmac_parse_psd_data_88xxNathan Chancellor
Clang warns: drivers/staging/rtlwifi/halmac/halmac_88xx/halmac_func_88xx.c:2472:11: warning: implicit conversion from enumeration type 'enum halmac_cmd_process_status' to different enumeration type 'enum halmac_ret_status' [-Wenum-conversion] return HALMAC_CMD_PROCESS_ERROR; ~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~ 1 warning generated. Fix this by using the proper enum for allocation failures, HALMAC_RET_MALLOC_FAIL, which is used in the rest of this file. Fixes: e4b08e16b7d9 ("staging: r8822be: check kzalloc return or bail") Link: https://github.com/ClangBuiltLinux/linux/issues/375 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-21Staging: rtl8192e: Replace license text with SPDX identifierBhanusree Pola
- adds the SPDX GPL-2.0 license identifier which solves the checkpatch.pl warning - Removed license boilerplate text - Issue found with checkpatch.pl warning: "WARNING: Missing or malformed SPDX-License-Identifier tag in line 1" Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20staging: erofs: remove rcu_read_lock() in erofs_try_to_free_cached_pageGao Xiang
page_private(page) cannot be changed if page lock is taken. Besides, the corresponding workgroup won't be freed if the page is already protected by page lock, therefore no need to take rcu read lock. Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20staging: erofs: fix race of initializing xattrs of a inode at the same timeGao Xiang
In real scenario, there could be several threads accessing xattrs of the same xattr-uninitialized inode, and init_inode_xattrs() almost at the same time. That's actually an unexpected behavior, this patch closes the race. Fixes: b17500a0fdba ("staging: erofs: introduce xattr & acl support") Cc: <stable@vger.kernel.org> # 4.19+ Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: visornic: use skb_put_zero() instead of open-coded versionJann Horn
Replace an open-coded version of skb_put_zero() with a call to the helper. This is a cleanup and is also useful for potentially adding KASAN integration to SKBs in the future. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: erofs: match alignment with open parenthesesBhanusree Pola
Align code with open parantheses to improve the readability. Issue found using checkpatch.pl Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Reviewed-by: Gao Xiang <gaoxiang25@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: android: ashmem: Don't call fallocate() with ashmem_mutex held.Tetsuo Handa
syzbot is hitting lockdep warnings [1][2][3]. This patch tries to fix the warning by eliminating ashmem_shrink_scan() => {shmem|vfs}_fallocate() sequence. [1] https://syzkaller.appspot.com/bug?id=87c399f6fa6955006080b24142e2ce7680295ad4 [2] https://syzkaller.appspot.com/bug?id=7ebea492de7521048355fc84210220e1038a7908 [3] https://syzkaller.appspot.com/bug?id=e02419c12131c24e2a957ea050c2ab6dcbbc3270 Reported-by: syzbot <syzbot+a76129f18c89f3e2ddd4@syzkaller.appspotmail.com> Reported-by: syzbot <syzbot+148c2885d71194f18d28@syzkaller.appspotmail.com> Reported-by: syzbot <syzbot+4b8b031b89e6b96c4b2e@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable@vger.kernel.org Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-mmc: Prefer using BIT macroBhanusree Pola
Use BIT(x) instead of (1<<x), reported by checkpatch.pl. Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: rtlwifi: Remove set but not used variables 'dataempty, hoffset'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/staging/rtlwifi/efuse.c: In function 'efuse_pg_packet_write': drivers/staging/rtlwifi/efuse.c:922:24: warning: variable 'dataempty' set but not used [-Wunused-but-set-variable] drivers/staging/rtlwifi/efuse.c: In function 'efuse_get_current_size': drivers/staging/rtlwifi/efuse.c:1185:5: warning: variable 'hoffset' set but not used [-Wunused-but-set-variable] They're never used and can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-mmc: Remove unused including <linux/version.h>YueHaibing
Remove including <linux/version.h> that don't need it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: rtl8188eu: fix bad indentation for conditional statementStephen Martin
Fixed else block indentation Signed-off-by: Stephen Martin <lockwood@opperline.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: vt6656: key: Mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/staging/vt6656/key.c: In function ‘vnt_set_keymode’: drivers/staging/vt6656/key.c:70:19: warning: this statement may fall through [-Wimplicit-fallthrough=] key->hw_key_idx = entry; ~~~~~~~~~~~~~~~~^~~~~~~ drivers/staging/vt6656/key.c:71:2: note: here case VNT_KEY_ALLGROUP: ^~~~ drivers/staging/vt6656/key.c:73:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (onfly_latch) ^ drivers/staging/vt6656/key.c:75:2: note: here case VNT_KEY_GROUP_ADDRESS: ^~~~ drivers/staging/vt6656/key.c:76:12: warning: this statement may fall through [-Wimplicit-fallthrough=] key_mode |= mode; ~~~~~~~~~^~~~~~~ drivers/staging/vt6656/key.c:77:2: note: here case VNT_KEY_GROUP: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: rtl8192e: Remove set but not used variables 'broad_addr, stype'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/staging/rtl8192e/rtl8192e/rtl_core.c: In function '_rtl92e_tx': drivers/staging/rtl8192e/rtl8192e/rtl_core.c:1732:28: warning: variable 'broad_addr' set but not used [-Wunused-but-set-variable] drivers/staging/rtl8192e/rtl8192e/rtl_core.c:1731:24: warning: variable 'stype' set but not used [-Wunused-but-set-variable] This remove unnessesary bool variable 'multi_addr, broad_addr, uni_addr' Also 'stype' never used and can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-pci: reverse condition to check for enabled portSergio Paracuellos
Each enabled port is being checked in 'mt7621_pcie_enable_ports" function calling 'mt7621_pcie_enable_port'. The return value for this function on success is zero, so the check is reversed. Fix it. Fixes: 802a2f7b2fe3: staging: mt7621-pci: factor out 'mt7621_pcie_enable_port' function Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-pci: remove two register writesSergio Paracuellos
There is no need to write IO and memory space window Host PCI bridge registers before doing anything else. Just use its default values which should be ok. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: NeilBrown <neil@brown.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-pci: replace spaces with tabs in commentSergio Paracuellos
To properly follow kernel style replace spaces with tabs in comment where link status bits are explained. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: NeilBrown <neil@brown.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-pci: remove not used definitionsSergio Paracuellos
There are two definitions which are not being used at all. Remove them. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: NeilBrown <neil@brown.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-dts: add general pcie reset line to pcie bindingsSergio Paracuellos
Add general pci reset line to pcie bindings to use reset_control properly in driver code. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: NeilBrown <neil@brown.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-pci: add reset control for general pcie resetSergio Paracuellos
There is still a reset line which is not being handled using reset_control properly and just being accessing writing registers. Use reset_control instead for pcie general reset line. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: NeilBrown <neil@brown.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: rtlwifi: fix spelling mistake: "Hightest" -> "Highest"Colin Ian King
Trivial fix to spelling mistake in ODM_RT_TRACE message text, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-pci-phy: use 'module_init' instead of 'arch_initcall'Sergio Paracuellos
Init driver as 'arch_initcall()' does not work. It causes phy_create() to be called before the phy module is initialized, so 'phy_class' is NULL, the new phy isn't placed in the right class, and it cannot be found. Change to 'module_init()' which works properly in this case. Fixes: 00981d31d6df: staging: mt7621-pci-phy: add new driver for phy part of mt7621-pci Reported-by: NeilBrown <neil@brown.name> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 21:41:29 +0000