summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-05-13MIPS: Don't add leading spacing to command linesRabin Vincent
The leading spaces don't affect functionality but are unnecessary. Signed-off-by: Rabin Vincent <rabinv@axis.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13180/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: genex: Indent delay slots & clean whitespaceJames Hogan
Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Support extended ASIDsPaul Burton
Add support for extended ASIDs as determined by the Config4.AE bit. Since the only supported CPUs known to implement this are Netlogic XLP and MIPS I6400, select this variable ASID support based upon CONFIG_CPU_XLP and CONFIG_CPU_MIPSR6. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Jayachandran C. <jchandra@broadcom.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13211/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Retrieve ASID masks using function accepting struct cpuinfo_mipsPaul Burton
In preparation for supporting variable ASID masks, retrieve ASID masks using functions in asm/cpu-info.h which accept struct cpuinfo_mips. This will allow those functions to determine the ASID mask based upon the CPU in a later patch. This also allows for the r3k & r8k cases to be handled in Kconfig, which is arguably cleaner than the previous #ifdefs. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13210/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: KVM/locore.S: Relax noatJames Hogan
Now that the at register ($1) is no longer saved by __kvm_mips_vcpu_run(), relax the noat assembler directive so that it only applies around code where at is restored before entering guest, and saved after exiting guest. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13209/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: KVM/locore.S: Only preserve callee saved registersJames Hogan
Update __kvm_mips_vcpu_run() to only save and restore callee saved registers. It is always called using the standard ABIs, so the caller will preserve any other registers that need preserving. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13208/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: KVM: Abstract guest ASID maskPaul Burton
In preparation for supporting varied widths of ASID mask in the kernel in general, switch KVM's guest ASIDs to a new KVM_ENTRYHI_ASID definition based on the 8-bit MIPS_ENTRYHI_ASID instead of ASID_MASK. It could potentially be used to support extended guest ASIDs in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13207/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add & use CP0_EntryHi ASID definitionsJames Hogan
Add definitions for the ASID field in CP0_EntryHi (along with the soon to be used ASIDX field), and use them in a few previously hardcoded cases. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13205/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: KVM/locore.S: Don't preserve host ASID around vcpu_runJames Hogan
MIPS KVM uses different ASIDs for guest execution than for the host. The host ASID is saved on the stack when entering the guest with __kvm_mips_vcpu_run(), and restored again before returning back to the caller (exit to userland). - This does not take into account that pre-emption may have taken place during that time, which may have started a new ASID cycle and resulted in that process' ASID being invalidated and reused. - This does not take into account that the process may have migrated to a different CPU during that time, with a different ASID assignment since they are managed per-CPU. - It is actually redundant, since the host ASID will be restored correctly by kvm_arch_vcpu_put(), which is called almost immediately after kvm_arch_vcpu_ioctl_run() returns. Therefore drop this code from locore.S Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13206/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Change my email addressJohn Crispin
The old address is no longer valid. Use the my new one instead. Signed-off-by: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13201/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MAINTAINERS: Change my email addressJohn Crispin
The old address is no longer valid. Use the my new one instead. Signed-off-by: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13200/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Implement __arch_bitrev* using bitswap for MIPSr6Paul Burton
Release 6 of the MIPS architecture introduced the bitswap instruction, which reverses the bits within each byte of a word. Make use of this instruction to implement the __arch_bitrev* functions, which should be faster for most MIPSr6 CPUs, reduces code size slightly and allows us to avoid the lookup table used by the generic implementation, saving 256 bytes in the kernel binary by dropping that. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13204/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Remove no longer needed work_on_cpu() callAnna-Maria Gleixner
Since commit 3b9d6da67e11 ("cpu/hotplug: Fix rollback during error-out in __cpu_disable()") it is ensured that callbacks of CPU_ONLINE and CPU_DOWN_PREPARE are processed on the hotplugged CPU. Due to this work_on_cpu() calls are no longer required. Replace work_on_cpu() with a direct call of mips_cdmm_bus_up() or mips_cdmm_bus_down(). Description of those functions are adapted. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: rt@linutronix.de Patchwork: https://patchwork.linux-mips.org/patch/13197/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: make PCI_DMA_BUS_IS_PHYS=1 constantSergey Ryazanov
No one of supported MIPS machines has an IOMMU unit, so we can safely define PCI_DMA_BUS_IS_PHYS = 1. Also remove iommu flag from the pci controller structure, since it is useless. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Linux MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7604/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS64: Support of at least 48 bits of SEGBITSLeonid Yegoshin
SEGBITS is 40 bits or more, depending on CPU type. Introduces optional support for 48 bits of application virtual address space. Only 16K and 64K pages are supported. Enabling will result in a memory overhead of a small number of pages for small applications. For 64K pages a 3rd level of page tables is required which has some impact during software TLB refill. [ralf@linux-mips.org: Fixed things raised in the review of the version posted and changed kconfig to be a bit more userfriendly.] Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: aleksey.makarov@auriga.com Cc: james.hogan@imgtec.com Cc: paul.burton@imgtec.com Cc: david.daney@cavium.com Cc: peterz@infradead.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: davidlohr@hp.com Cc: kirill@shutemov.name Cc: akpm@linux-foundation.org Cc: mingo@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10051/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS64: signal: Fix o32 sigaction syscallLeonid Yegoshin
MIPS32 o32 ABI sigaction() processing on MIPS64 n64 kernel was incorrectly set to processing aka rt_sigaction() variant only. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: paul.burton@imgtec.com Cc: richard@nod.at Cc: luto@amacapital.net Cc: alex.smith@imgtec.com Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: mpe@ellerman.id.au Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11321/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: remove aliasing alignment if HW has antialising supportLeonid Yegoshin
MIPS hardware may have an antialising support and it works even page size is small. Setup a shared memory aliasing mask to page size if hardware has an antialising support. Big shared memory mask forces a disruption in page address assignment and that corrupts Android library memory handling. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: cernekee@gmail.com Cc: paul.gortmaker@windriver.com Cc: kumba@gentoo.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11516/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: traps: remove unused variableTony Wu
flags is indeed unused. Signed-off-by: Tony Wu <tung7970@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11699/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Loongson-3: Introduce CONFIG_LOONGSON3_ENHANCEMENTHuacai Chen
New Loongson 3 CPU (since Loongson-3A R2, as opposed to Loongson-3A R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPv2 ASE, User Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer), Fast TLB refill support, etc. This patch introduce a config option, CONFIG_LOONGSON3_ENHANCEMENT, to enable those enhancements which are not probed at run time. If you want a generic kernel to run on all Loongson 3 machines, please say 'N' here. If you want a high-performance kernel to run on new Loongson 3 machines only, please say 'Y' here. Some additional explanations: 1) SFB locates between core and L1 cache, it causes memory access out of order, so writel/outl (and other similar functions) need a I/O reorder barrier. 2) Loongson 3 has a bug that di instruction can not save the irqflag, so arch_local_irq_save() is modified. Since CPU_MIPSR2 is selected by CONFIG_LOONGSON3_ENHANCEMENT, generic kernel doesn't use ei/di at all. 3) CPU_HAS_PREFETCH is selected by CONFIG_LOONGSON3_ENHANCEMENT, so MIPS_CPU_PREFETCH (used by uasm) probing is also put in this patch. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12755/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Loongson-3: Fast TLB refill handlerHuacai Chen
Loongson-3A R2 has pwbase/pwfield/pwsize/pwctl registers in CP0 (this is very similar to HTW) and lwdir/lwpte/lddir/ldpte instructions which can be used for fast TLB refill. [ralf@linux-mips.org: Resolve conflict.] Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12754/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Loongson: Invalidate special TLBs when neededHuacai Chen
Loongson-2 has a 4 entry itlb which is a subset of jtlb, Loongson-3 has a 4 entry itlb and a 4 entry dtlb which are subsets of jtlb. We should write diag register to invalidate itlb/dtlb when flushing jtlb because itlb/dtlb are not totally transparent to software. For Loongson-3A R2 (and newer), we should invalidate ITLB, DTLB, VTLB and FTLB before we enable/disable FTLB. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12753/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Loongson-3: Set cache flush handlers to cache_noopHuacai Chen
Loongson-3 maintains cache coherency by hardware, this means: 1) It's icache is coherent with dcache. 2) It's dcaches don't alias (maybe depend on PAGE_SIZE). 3) It maintains cache coherency across cores (and for DMA). So we can skip most cache flush operations by setting relevant handlers to `cache_noop' in `r4k_cache_init'. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12752/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Loongson: Add Loongson-3A R2 basic supportHuacai Chen
Loongson-3 CPU family: Code-name Brand-name PRId Loongson-3A R1 Loongson-3A1000 0x6305 Loongson-3A R2 Loongson-3A2000 0x6308 Loongson-3B R1 Loongson-3B1000 0x6306 Loongson-3B R2 Loongson-3B1500 0x6307 Features of R2 revision of Loongson-3A: - Primary cache includes I-Cache, D-Cache and V-Cache (Victim Cache). - I-Cache, D-Cache and V-Cache are 16-way set-associative, linesize is 64 bytes. - 64 entries of VTLB (classic TLB), 1024 entries of FTLB (8-way set-associative). - Supports DSP/DSPv2 instructions, UserLocal register and Read-Inhibit/ Execute-Inhibit. [ralf@linux-mips.org: Resolved merge conflicts.] Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12751/ Patchwork: https://patchwork.linux-mips.org/patch/13136/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Loongson-3: Adjust irq dispatch to speedup processingHuacai Chen
This patch adjust the logic in mach_irq_dispatch(), allow multiple IPs handled in the same dispatching. This can speedup interrupt processing. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12891/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Loongson-3: Move chipset ACPI code from drivers to archHuacai Chen
SB700/SB710/SB800 chipset ACPI code is mostly Loongson-3 specific routines rather than a "platform driver". Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11273/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BCM1480: bcm1480_regs.h: strip redundant commentsAntonio Ospite
Strip some comments which probably meant to repeat the same value of the define; they also contained a confusing 0x0x prefix. Signed-off-by: Antonio Ospite <ao2@ao2.it> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12254/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add and use watch register field definitionsJames Hogan
The files watch.c and ptrace.c contain various magic masks for WatchLo/WatchHi register fields. Add some definitions to mipsregs.h for these registers and make use of them in both watch.c and ptrace.c, hopefully making them more readable. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12729/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add and use CAUSEF_WP definitionJames Hogan
do_watch() clears bit 22 of cause without using a CAUSEF_* definition from mipsregs.h. Add a definition for this bit (CAUSEF_WP) and make use of it. Also use clear_c0_cause() instead of manual read/modify/write. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12728/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13watchdog: pic32-dmt: Add PIC32 deadman timer driverPurna Chandra Mandal
Adds support for the deadman timer peripheral found on PIC32 class devices. The primary function of the deadman timer (DMT) is to reset the processor in the event of a software malfunction. The DMT is a free-running instruction fetch timer, which is clocked whenever an instruction fetch occurs until a count match occurs. Instructions are not fetched when the processor is in sleep mode. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12703/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13dt/bindings: Add bindings for PIC32 deadman timer peripheralPurna Chandra Mandal
Document the devicetree bindings for the deadman timer peripheral found on Microchip PIC32 SoC class devices. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12702/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13watchdog: pic32-wdt: Add PIC32 watchdog driverJoshua Henderson
Add support for the watchdog peripheral found on PIC32 class devices. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12701/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13dt/bindings: Add bindings for PIC32 watchdog peripheralJoshua Henderson
Document the devicetree bindings for the watchdog peripheral found on Microchip PIC32 SoC class devices. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12700/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: module: fix incorrect IS_ERR_VALUE macro usagesAndrzej Hajda
IS_ERR_VALUE macro should be used only with unsigned long type. Specifically it works incorrectly with longer types. The patch follows conclusion from discussion on LKML [1][2]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2120927 [2]: http://permalink.gmane.org/gmane.linux.kernel/2150581 [ralf@linux-mips.org: While it may not immediately be obvious, the type of st_value in the end is an unsigned long equivalent so the invocation of IS_ERR_VALUE() was valid but I'm applying the patch anyway for clarity.] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12553/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: math-emu: Always propagate sNaN payload in quietingMaciej W. Rozycki
Propagate sNaN payload in quieting in the legacy-NaN mode as well. If clearing the quiet bit would produce infinity, then set the next lower trailing significand field bit, matching the SB-1 and BMIPS5000 hardware implementations. Some other MIPS FPU hardware implementations do produce the default qNaN bit pattern instead. This reverts some changes made for semantics preservation with commit dc3ddf42 [MIPS: math-emu: Update sNaN quieting handlers], consequently bringing back most of the semantics from before commit fdffbafb [Lots of FPU bug fixes from Kjeld Borch Egevang.], except from the qNaN produced in the infinity case. Previously the default qNaN bit pattern was produced in that case. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11483/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ELF: Restructure personality macrosMaciej W. Rozycki
Update the ELF personality macros used for individual ABIs to make actions in the same order across all of them and match formatting too. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Fix uapi include in exported asm/siginfo.hJames Hogan
Since commit 8cb48fe169dd ("MIPS: Provide correct siginfo_t.si_stime"), MIPS' uapi/asm/siginfo.h has included uapi/asm-generic/siginfo.h directly before defining MIPS' struct siginfo, in order to get the necessary definitions needed for the siginfo struct without the generic copy_siginfo() hitting compiler errors due to struct siginfo not yet being defined. Now that the generic copy_siginfo() is moved out to linux/signal.h we can safely include asm-generic/siginfo.h before defining the MIPS specific struct siginfo, which avoids the uapi/ include as well as breakage due to generic copy_siginfo() being defined before struct siginfo. Reported-by: Christopher Ferris <cferris@google.com> Fixes: 8cb48fe169dd ("MIPS: Provide correct siginfo_t.si_stime") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Petr Malat <oss@malat.biz> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.0- Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13SIGNAL: Move generic copy_siginfo() to signal.hJames Hogan
The generic copy_siginfo() is currently defined in asm-generic/siginfo.h, after including uapi/asm-generic/siginfo.h which defines the generic struct siginfo. However this makes it awkward for an architecture to use it if it has to define its own struct siginfo (e.g. MIPS and potentially IA64), since it means that asm-generic/siginfo.h can only be included after defining the arch-specific siginfo, which may be problematic if the arch-specific definition needs definitions from uapi/asm-generic/siginfo.h. It is possible to work around this by first including uapi/asm-generic/siginfo.h to get the constants before defining the arch-specific siginfo, and include asm-generic/siginfo.h after. However uapi headers can't be included by other uapi headers, so that first include has to be in an ifdef __kernel__, with the non __kernel__ case including the non-UAPI header instead. Instead of that mess, move the generic copy_siginfo() definition into linux/signal.h, which allows an arch-specific uapi/asm/siginfo.h to include asm-generic/siginfo.h and define the arch-specific siginfo, and for the generic copy_siginfo() to see that arch-specific definition. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Petr Malat <oss@malat.biz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Christopher Ferris <cferris@google.com> Cc: linux-arch@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-ia64@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> # 4.0- Patchwork: https://patchwork.linux-mips.org/patch/12478/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Octeon: Mark some functions __init in smp.cYang Shi
octeon_smp_setup and octeon_prepare_cpus are just used during initialization period, so mark them as __init. And, octeon_prepare_cpus is just used in smp.c, so make it static as well. Signed-off-by: Yang Shi <yang.shi@windriver.com> Cc: david.daney@cavium.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12574/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Improve BCM6368 device treeÁlvaro Fernández Rojas
- Remove unneeded leds0 alias. - Switch to bcm6345-l1-intc interrupt controller. - Use interrupt-controller instead of periph_intc and cpu_intc. - Add uart1 node. - Single ohci and ehci nodes. - Avoid using underscores in node names. - Rename uart aliases to serial. - Remove blank line in cpus node. [ralf@linux-mips.org: fix references in bcm96368mvwg.dts so the file keeps building.] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Cc: f.fainelli@gmail.com Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: robh@kernel.org Cc: simon@fire.lp0.eu Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Improve BCM6328 device treeÁlvaro Fernández Rojas
- Remove unneeded leds0 alias. - Switch to bcm6345-l1-intc interrupt controller. - Use interrupt-controller instead of periph_intc and cpu_intc. - Add uart1, ehci and ohci nodes. - Refactor syscon and syscon-reboot. - Avoid using underscores in node names. - Rename uart aliases to serial. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Cc: f.fainelli@gmail.com Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: robh@kernel.org Cc: simon@fire.lp0.eu Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13043/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Add support for BCM63268Álvaro Fernández Rojas
This SoC is very similar to BCM63168 and Broadcom usually refers to them as BCM63268. Add BCM63268 and missing BCM63168 to device tree documentation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Cc: f.fainelli@gmail.com Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: robh@kernel.org Cc: simon@fire.lp0.eu Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13042/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Add device tree example for BCM6358Álvaro Fernández Rojas
This adds a device tree example for SFR Neufbox4 (Sercomm version), which also serves as a real example for brcm,bcm6358-leds. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Cc: f.fainelli@gmail.com Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: robh@kernel.org Cc: simon@fire.lp0.eu Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13041/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Add BCM6358 supportÁlvaro Fernández Rojas
BCM6358 has a shared TLB which conflicts with current SMP support, so it must be disabled for now. BCM6358 uses >= 0xfffe0000 addresses for internal registers, which need to be remapped (by using a simplified version of BRCM63xx ioremap.h). However, 0xfff80000 is a better address, since it also covers BCM3368, leaving the possibility to add it in the future. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Cc: f.fainelli@gmail.com Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: robh@kernel.org Cc: simon@fire.lp0.eu Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13040/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13CPUFREQ: Loongson1: Replace goto out with return in ls1x_cpufreq_probe()Kelvin Cheung
This patch replaces goto out with return in ls1x_cpufreq_probe(). Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: linux-pm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13056/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13CPUFREQ: Loongson1: Use devm_kzalloc() instead of global structureKelvin Cheung
This patch uses devm_kzalloc() instead of global structure. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: linux-pm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13055/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13CPUFREQ: Loongson1: Use dev_get_platdata() to get platform_dataKelvin Cheung
This patch uses dev_get_platdata() to get the platform_data instead of referencing it directly. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: linux-pm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13054/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13CPUFREQ: Loongson1: Replace kzalloc() with kcalloc()Kelvin Cheung
This patch replaces kzalloc() with kcalloc() when allocating frequency table, and remove unnecessary 'out of memory' message. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: linux-pm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13053/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13CPUFREQ: Loongson1: Rename the file to loongson1-cpufreq.cKelvin Cheung
This patch renames the file to loongson1-cpufreq.c, and also includes some minor updates. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: linux-pm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13052/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Pretty print BMIPS5200 processor nameFlorian Fainelli
Just to ease debugging of multiplatform kernel, make sure we print "Broadcom BMIPS5200" for the BMIPS5200 implementation instead of Broadcom BMIPS5000. Fixes: 68e6a78373a6d ("MIPS: BMIPS: Add PRId for BMIPS5200 (Whirlwind)") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13014/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Add cpu-feature-overrides.hFlorian Fainelli
BMIPS_GENERIC being multiplatform and intended to support BMIPS3200, BMIPS3300, BMIPS4350, BMIPS4380 and BMIPS5000-class processors, there is not much more we can put in there since they do not share the same I and D cache line sizes at all (doubled for every new generation essentially), some processors have a S-cache, some don't, some have a FPU, some don't. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13013/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-03 00:31:27 +0000