summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-05-25bpf: properly reset caller saved regs after helper call and ld_abs/indDaniel Borkmann
Currently, after performing helper calls, we clear all caller saved registers, that is r0 - r5 and fill r0 depending on struct bpf_func_proto specification. The way we reset these regs can affect pruning decisions in later paths, since we only reset register's imm to 0 and type to NOT_INIT. However, we leave out clearing of other variables such as id, min_value, max_value, etc, which can later on lead to pruning mismatches due to stale data. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25bpf: fix incorrect pruning decision when alignment must be trackedDaniel Borkmann
Currently, when we enforce alignment tracking on direct packet access, the verifier lets the following program pass despite doing a packet write with unaligned access: 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (61) r7 = *(u32 *)(r1 +8) 3: (bf) r0 = r2 4: (07) r0 += 14 5: (25) if r7 > 0x1 goto pc+4 R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R7=inv,min_value=0,max_value=1 R10=fp 6: (2d) if r0 > r3 goto pc+1 R0=pkt(id=0,off=14,r=14) R1=ctx R2=pkt(id=0,off=0,r=14) R3=pkt_end R7=inv,min_value=0,max_value=1 R10=fp 7: (63) *(u32 *)(r0 -4) = r0 8: (b7) r0 = 0 9: (95) exit from 6 to 8: R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R7=inv,min_value=0,max_value=1 R10=fp 8: (b7) r0 = 0 9: (95) exit from 5 to 10: R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R7=inv,min_value=2 R10=fp 10: (07) r0 += 1 11: (05) goto pc-6 6: safe <----- here, wrongly found safe processed 15 insns However, if we enforce a pruning mismatch by adding state into r8 which is then being mismatched in states_equal(), we find that for the otherwise same program, the verifier detects a misaligned packet access when actually walking that path: 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (61) r7 = *(u32 *)(r1 +8) 3: (b7) r8 = 1 4: (bf) r0 = r2 5: (07) r0 += 14 6: (25) if r7 > 0x1 goto pc+4 R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R7=inv,min_value=0,max_value=1 R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp 7: (2d) if r0 > r3 goto pc+1 R0=pkt(id=0,off=14,r=14) R1=ctx R2=pkt(id=0,off=0,r=14) R3=pkt_end R7=inv,min_value=0,max_value=1 R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp 8: (63) *(u32 *)(r0 -4) = r0 9: (b7) r0 = 0 10: (95) exit from 7 to 9: R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R7=inv,min_value=0,max_value=1 R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp 9: (b7) r0 = 0 10: (95) exit from 6 to 11: R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R7=inv,min_value=2 R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp 11: (07) r0 += 1 12: (b7) r8 = 0 13: (05) goto pc-7 <----- mismatch due to r8 7: (2d) if r0 > r3 goto pc+1 R0=pkt(id=0,off=15,r=15) R1=ctx R2=pkt(id=0,off=0,r=15) R3=pkt_end R7=inv,min_value=2 R8=imm0,min_value=0,max_value=0,min_align=2147483648 R10=fp 8: (63) *(u32 *)(r0 -4) = r0 misaligned packet access off 2+15+-4 size 4 The reason why we fail to see it in states_equal() is that the third test in compare_ptrs_to_packet() ... if (old->off <= cur->off && old->off >= old->range && cur->off >= cur->range) return true; ... will let the above pass. The situation we run into is that old->off <= cur->off (14 <= 15), meaning that prior walked paths went with smaller offset, which was later used in the packet access after successful packet range check and found to be safe already. For example: Given is R0=pkt(id=0,off=0,r=0). Adding offset 14 as in above program to it, results in R0=pkt(id=0,off=14,r=0) before the packet range test. Now, testing this against R3=pkt_end with 'if r0 > r3 goto out' will transform R0 into R0=pkt(id=0,off=14,r=14) for the case when we're within bounds. A write into the packet at offset *(u32 *)(r0 -4), that is, 2 + 14 -4, is valid and aligned (2 is for NET_IP_ALIGN). After processing this with all fall-through paths, we later on check paths from branches. When the above skb->mark test is true, then we jump near the end of the program, perform r0 += 1, and jump back to the 'if r0 > r3 goto out' test we've visited earlier already. This time, R0 is of type R0=pkt(id=0,off=15,r=0), and we'll prune that part because this time we'll have a larger safe packet range, and we already found that with off=14 all further insn were already safe, so it's safe as well with a larger off. However, the problem is that the subsequent write into the packet with 2 + 15 -4 is then unaligned, and not caught by the alignment tracking. Note that min_align, aux_off, and aux_off_align were all 0 in this example. Since we cannot tell at this time what kind of packet access was performed in the prior walk and what minimal requirements it has (we might do so in the future, but that requires more complexity), fix it to disable this pruning case for strict alignment for now, and let the verifier do check such paths instead. With that applied, the test cases pass and reject the program due to misalignment. Fixes: d1174416747d ("bpf: Track alignment of register values in the verifier.") Reference: http://patchwork.ozlabs.org/patch/761909/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25arp: fixed -Wuninitialized compiler warningIhar Hrachyshka
Commit 7d472a59c0e5ec117220a05de6b370447fb6cb66 ("arp: always override existing neigh entries with gratuitous ARP") introduced a compiler warning: net/ipv4/arp.c:880:35: warning: 'addr_type' may be used uninitialized in this function [-Wmaybe-uninitialized] While the code logic seems to be correct and doesn't allow the variable to be used uninitialized, and the warning is not consistently reproducible, it's still worth fixing it for other people not to waste time looking at the warning in case it pops up in the build environment. Yes, compiler is probably at fault, but we will need to accommodate. Fixes: 7d472a59c0e5 ("arp: always override existing neigh entries with gratuitous ARP") Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25tcp: avoid fastopen API to be used on AF_UNSPECWei Wang
Fastopen API should be used to perform fastopen operations on the TCP socket. It does not make sense to use fastopen API to perform disconnect by calling it with AF_UNSPEC. The fastopen data path is also prone to race conditions and bugs when using with AF_UNSPEC. One issue reported and analyzed by Vegard Nossum is as follows: +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Thread A: Thread B: ------------------------------------------------------------------------ sendto() - tcp_sendmsg() - sk_stream_memory_free() = 0 - goto wait_for_sndbuf - sk_stream_wait_memory() - sk_wait_event() // sleep | sendto(flags=MSG_FASTOPEN, dest_addr=AF_UNSPEC) | - tcp_sendmsg() | - tcp_sendmsg_fastopen() | - __inet_stream_connect() | - tcp_disconnect() //because of AF_UNSPEC | - tcp_transmit_skb()// send RST | - return 0; // no reconnect! | - sk_stream_wait_connect() | - sock_error() | - xchg(&sk->sk_err, 0) | - return -ECONNRESET - ... // wake up, see sk->sk_err == 0 - skb_entail() on TCP_CLOSE socket If the connection is reopened then we will send a brand new SYN packet after thread A has already queued a buffer. At this point I think the socket internal state (sequence numbers etc.) becomes messed up. When the new connection is closed, the FIN-ACK is rejected because the sequence number is outside the window. The other side tries to retransmit, but __tcp_retransmit_skb() calls tcp_trim_head() on an empty skb which corrupts the skb data length and hits a BUG() in copy_and_csum_bits(). +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Hence, this patch adds a check for AF_UNSPEC in the fastopen data path and return EOPNOTSUPP to user if such case happens. Fixes: cf60af03ca4e7 ("tcp: Fast Open client - sendmsg(MSG_FASTOPEN)") Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25net: move somaxconn init from sysctl codeRoman Kapl
The default value for somaxconn is set in sysctl_core_net_init(), but this function is not called when kernel is configured without CONFIG_SYSCTL. This results in the kernel not being able to accept TCP connections, because the backlog has zero size. Usually, the user ends up with: "TCP: request_sock_TCP: Possible SYN flooding on port 7. Dropping request. Check SNMP counters." If SYN cookies are not enabled the connection is rejected. Before ef547f2ac16 (tcp: remove max_qlen_log), the effects were less severe, because the backlog was always at least eight slots long. Signed-off-by: Roman Kapl <roman.kapl@sysgo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25Input: elan_i2c - ignore signals when finishing updating firmwareKT Liao
Use wait_for_completion_timeout() instead of wait_for_completion_interruptible_timeout() to avoid stray signals ruining firmware update. Our timeout is only 300 msec so we are fine simply letting it expire in case device misbehaves. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-25Input: elan_i2c - clear INT before resetting controllerKT Liao
Some old touchpad FWs need to have interrupt cleared before issuing reset command after updating firmware. We clear interrupt by attempting to read full report from the controller, and discarding any data read. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-25net: fix potential null pointer dereferenceGustavo A. R. Silva
Add null check to avoid a potential null pointer dereference. Addresses-Coverity-ID: 1408831 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25drm/amdgpu: fix null point error when rmmod amdgpu.Rex Zhu
this bug happened when amdgpu load failed. [ 75.740951] BUG: unable to handle kernel paging request at 00000000000031c0 [ 75.748167] IP: [<ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu] [ 75.755774] PGD 0 [ 75.759185] Oops: 0000 [#1] SMP [ 75.762408] Modules linked in: amdgpu(OE-) ttm(OE) drm_kms_helper(OE) drm(OE) i2c_algo_bit(E) fb_sys_fops(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) rpcsec_gss_krb5(E) nfsv4(E) nfs(E) fscache(E) eeepc_wmi(E) asus_wmi(E) sparse_keymap(E) intel_rapl(E) snd_hda_codec_hdmi(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E) snd_hda_intel(E) snd_hda_codec(E) snd_hda_core(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) snd_hwdep(E) snd_pcm(E) snd_seq_midi(E) coretemp(E) kvm_intel(E) snd_seq_midi_event(E) snd_rawmidi(E) kvm(E) snd_seq(E) joydev(E) snd_seq_device(E) snd_timer(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) mei_me(E) ghash_clmulni_intel(E) snd(E) aesni_intel(E) mei(E) soundcore(E) aes_x86_64(E) shpchp(E) serio_raw(E) lrw(E) acpi_pad(E) gf128mul(E) glue_helper(E) ablk_helper(E) mac_hid(E) [ 75.835574] cryptd(E) parport_pc(E) ppdev(E) lp(E) nfsd(E) parport(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) autofs4(E) hid_generic(E) usbhid(E) mxm_wmi(E) psmouse(E) e1000e(E) ptp(E) pps_core(E) ahci(E) libahci(E) wmi(E) video(E) i2c_hid(E) hid(E) [ 75.858489] CPU: 5 PID: 1603 Comm: rmmod Tainted: G OE 4.9.0-custom #2 [ 75.866183] Hardware name: System manufacturer System Product Name/Z170-A, BIOS 0901 08/31/2015 [ 75.875050] task: ffff88045d1bbb80 task.stack: ffffc90002de4000 [ 75.881094] RIP: 0010:[<ffffffffa064a0e0>] [<ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu] [ 75.891238] RSP: 0018:ffffc90002de7d48 EFLAGS: 00010286 [ 75.896648] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 [ 75.903933] RDX: 0000000000000000 RSI: ffff88045d1bbb80 RDI: 0000000000000286 [ 75.911183] RBP: ffffc90002de7d50 R08: 0000000000000502 R09: 0000000000000004 [ 75.918449] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880464bf0000 [ 75.925675] R13: ffffffffa0853000 R14: 0000000000000000 R15: 0000564e44f88210 [ 75.932980] FS: 00007f13d5400700(0000) GS:ffff880476540000(0000) knlGS:0000000000000000 [ 75.941238] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 75.947088] CR2: 00000000000031c0 CR3: 000000045fd0b000 CR4: 00000000003406e0 [ 75.954332] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 75.961566] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 75.968834] Stack: [ 75.970881] ffff880464bf0000 ffffc90002de7d60 ffffffffa0636592 ffffc90002de7d80 [ 75.978454] ffffffffa059015f ffff880464bf0000 ffff880464bf0000 ffffc90002de7da8 [ 75.986076] ffffffffa0595216 ffff880464bf0000 ffff880460f4d000 ffffffffa0853000 [ 75.993692] Call Trace: [ 75.996177] [<ffffffffa0636592>] amdgpu_driver_lastclose_kms+0x12/0x20 [amdgpu] [ 76.003700] [<ffffffffa059015f>] drm_lastclose+0x2f/0xd0 [drm] [ 76.009777] [<ffffffffa0595216>] drm_dev_unregister+0x16/0xd0 [drm] [ 76.016255] [<ffffffffa0595944>] drm_put_dev+0x34/0x70 [drm] [ 76.022139] [<ffffffffa062f365>] amdgpu_pci_remove+0x15/0x20 [amdgpu] [ 76.028800] [<ffffffff81416499>] pci_device_remove+0x39/0xc0 [ 76.034661] [<ffffffff81531caa>] __device_release_driver+0x9a/0x140 [ 76.041121] [<ffffffff81531e58>] driver_detach+0xb8/0xc0 [ 76.046575] [<ffffffff81530c95>] bus_remove_driver+0x55/0xd0 [ 76.052401] [<ffffffff815325fc>] driver_unregister+0x2c/0x50 [ 76.058244] [<ffffffff81416289>] pci_unregister_driver+0x29/0x90 [ 76.064466] [<ffffffffa0596c5e>] drm_pci_exit+0x9e/0xb0 [drm] [ 76.070507] [<ffffffffa0796d71>] amdgpu_exit+0x1c/0x32 [amdgpu] [ 76.076609] [<ffffffff81104810>] SyS_delete_module+0x1a0/0x200 [ 76.082627] [<ffffffff810e2b1a>] ? rcu_eqs_enter.isra.36+0x4a/0x50 [ 76.089001] [<ffffffff8100392e>] do_syscall_64+0x6e/0x180 [ 76.094583] [<ffffffff817e1d2f>] entry_SYSCALL64_slow_path+0x25/0x25 [ 76.101114] Code: 94 c0 c3 31 c0 5d c3 0f 1f 40 00 0f 1f 44 00 00 55 31 c0 48 89 e5 53 48 89 fb 48 c7 c7 1d 21 84 a0 e8 ab 77 b3 e0 e8 fc 8b d7 e0 <48> 8b bb c0 31 00 00 48 85 ff 74 09 e8 ff eb fc ff 85 c0 75 03 [ 76.121432] RIP [<ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu] Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-25geneve: fix fill_info when using collect_metadataEric Garver
Since 9b4437a5b870 ("geneve: Unify LWT and netdev handling.") fill_info does not return UDP_ZERO_CSUM6_RX when using COLLECT_METADATA. This is because it uses ip_tunnel_info_af() with the device level info, which is not valid for COLLECT_METADATA. Fix by checking for the presence of the actual sockets. Fixes: 9b4437a5b870 ("geneve: Unify LWT and netdev handling.") Signed-off-by: Eric Garver <e@erig.me> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25xfs: Move handling of missing page into one place in ↵Jan Kara
xfs_find_get_desired_pgoff() Currently several places in xfs_find_get_desired_pgoff() handle the case of a missing page. Make them all handled in one place after the loop has terminated. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-05-25xfs: Fix off-by-in in loop termination in xfs_find_get_desired_pgoff()Jan Kara
There is an off-by-one error in loop termination conditions in xfs_find_get_desired_pgoff() since 'end' may index a page beyond end of desired range if 'endoff' is page aligned. It doesn't have any visible effects but still it is good to fix it. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-05-25xfs: Fix missed holes in SEEK_HOLE implementationJan Kara
XFS SEEK_HOLE implementation could miss a hole in an unwritten extent as can be seen by the following command: xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "pwrite 128k 8k" -c "seek -h 0" file wrote 57344/57344 bytes at offset 0 56 KiB, 14 ops; 0.0000 sec (49.312 MiB/sec and 12623.9856 ops/sec) wrote 8192/8192 bytes at offset 131072 8 KiB, 2 ops; 0.0000 sec (70.383 MiB/sec and 18018.0180 ops/sec) Whence Result HOLE 139264 Where we can see that hole at offset 56k was just ignored by SEEK_HOLE implementation. The bug is in xfs_find_get_desired_pgoff() which does not properly detect the case when pages are not contiguous. Fix the problem by properly detecting when found page has larger offset than expected. CC: stable@vger.kernel.org Fixes: d126d43f631f996daeee5006714fed914be32368 Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-05-25xfs: fix off-by-one on max nr_pages in xfs_find_get_desired_pgoff()Eryu Guan
xfs_find_get_desired_pgoff() is used to search for offset of hole or data in page range [index, end] (both inclusive), and the max number of pages to search should be at least one, if end == index. Otherwise the only page is missed and no hole or data is found, which is not correct. When block size is smaller than page size, this can be demonstrated by preallocating a file with size smaller than page size and writing data to the last block. E.g. run this xfs_io command on a 1k block size XFS on x86_64 host. # xfs_io -fc "falloc 0 3k" -c "pwrite 2k 1k" \ -c "seek -d 0" /mnt/xfs/testfile wrote 1024/1024 bytes at offset 2048 1 KiB, 1 ops; 0.0000 sec (33.675 MiB/sec and 34482.7586 ops/sec) Whence Result DATA EOF Data at offset 2k was missed, and lseek(2) returned ENXIO. This is uncovered by generic/285 subtest 07 and 08 on ppc64 host, where pagesize is 64k. Because a recent change to generic/285 reduced the preallocated file size to smaller than 64k. Cc: stable@vger.kernel.org # v3.7+ Signed-off-by: Eryu Guan <eguan@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-05-25xfs: fix unaligned access in xfs_btree_visit_blocksEric Sandeen
This structure copy was throwing unaligned access warnings on sparc64: Kernel unaligned access at TPC[1043c088] xfs_btree_visit_blocks+0x88/0xe0 [xfs] xfs_btree_copy_ptrs does a memcpy, which avoids it. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-05-25powerpc: Add PPC_FEATURE userspace bits for SCV and DARN instructionsNicholas Piggin
Providing "scv" support to userspace requires kernel support, so it must be advertised as independently to the base ISA 3 instruction set. The darn instruction relies on firmware enablement, so it has been decided to split this out from the core ISA 3 feature as well. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-25powerpc/spufs: Fix hash faults for kernel regionsJeremy Kerr
Commit ac29c64089b7 ("powerpc/mm: Replace _PAGE_USER with _PAGE_PRIVILEGED") swapped _PAGE_USER for _PAGE_PRIVILEGED, and introduced check_pte_access() which denied kernel access to non-_PAGE_PRIVILEGED pages. However, it didn't add _PAGE_PRIVILEGED to the hash fault handler for spufs' kernel accesses, so the DMAs required to establish SPE memory no longer work. This change adds _PAGE_PRIVILEGED to the hash fault handler for kernel accesses. Fixes: ac29c64089b7 ("powerpc/mm: Replace _PAGE_USER with _PAGE_PRIVILEGED") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Reported-by: Sombat Tragolgosol <sombat3960@gmail.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-25powerpc: Fix booting P9 hash with CONFIG_PPC_RADIX_MMU=NMichael Neuling
Currently if you disable CONFIG_PPC_RADIX_MMU you'll crash on boot on a P9. This is because we still set MMU_FTR_TYPE_RADIX via ibm,pa-features and MMU_FTR_TYPE_RADIX is what's used for code patching in much of the asm code (ie. slb_miss_realmode) This patch fixes the problem by stopping MMU_FTR_TYPE_RADIX from being set from ibm.pa-features. We may eventually end up removing the CONFIG_PPC_RADIX_MMU option completely but until then this fixes the issue. Fixes: 17a3dd2f5fc7 ("powerpc/mm/radix: Use firmware feature to enable Radix MMU") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-25powerpc/powernv/npu-dma.c: Fix opal_npu_destroy_context() callAlistair Popple
opal_npu_destroy_context() should be called with the NPU PHB, not the PCIe PHB. Fixes: 1ab66d1fbada ("powerpc/powernv: Introduce address translation services for Nvlink2") Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-25serial: altera_uart: call iounmap() at driver removeTobias Klauser
The driver calls ioremap() in the probe function but doesn't call iounmap() in the remove function correspondingly. Do so now. Follow commit 5c9d6abed9e0 ("serial: altera_jtaguart: adding iounmap()") Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25serial: imx: ensure UCR3 and UFCR are setup correctlyUwe Kleine-König
Commit e61c38d85b73 ("serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off") has a flaw: While UCR3 and UFCR were modified using read-modify-write before it switched to write register values independent of the previous state. That's a good idea in principle (and that's why I did it) but needs more care. This patch reinstates read-modify-write for UFCR and for UCR3 ensures that RXDMUXSEL and ADNIMP are set for post imx1. Fixes: e61c38d85b73 ("serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Mika Penttilä <mika.penttila@nextfour.com> Tested-by: Mika Penttilä <mika.penttila@nextfour.com> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Tested-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-24Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is quite a big update because it includes a rework of the lpfc driver to separate the NVMe part from the FC part. The reason for doing this is because two separate trees (the nvme and scsi trees respectively) want to update the individual components and this separation will prevent a really nasty cross tree entanglement by the time we reach the next merge window. The rest of the fixes are the usual minor sort with no significant security implications" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (25 commits) scsi: zero per-cmd private driver data for each MQ I/O scsi: csiostor: fix use after free in csio_hw_use_fwconfig() scsi: ufs: Clean up some rpm/spm level SysFS nodes upon remove scsi: lpfc: fix build issue if NVME_FC_TARGET is not defined scsi: lpfc: Fix NULL pointer dereference during PCI error recovery scsi: lpfc: update version to 11.2.0.14 scsi: lpfc: Add MDS Diagnostic support. scsi: lpfc: Fix NVMEI's handling of NVMET's PRLI response attributes scsi: lpfc: Cleanup entry_repost settings on SLI4 queues scsi: lpfc: Fix debugfs root inode "lpfc" not getting deleted on driver unload. scsi: lpfc: Fix NVME I+T not registering NVME as a supported FC4 type scsi: lpfc: Added recovery logic for running out of NVMET IO context resources scsi: lpfc: Separate NVMET RQ buffer posting from IO resources SGL/iocbq/context scsi: lpfc: Separate NVMET data buffer pool fir ELS/CT. scsi: lpfc: Fix NMI watchdog assertions when running nvmet IOPS tests scsi: lpfc: Fix NVMEI driver not decrementing counter causing bad rport state. scsi: lpfc: Fix nvmet RQ resource needs for large block writes. scsi: lpfc: Adding additional stats counters for nvme. scsi: lpfc: Fix system crash when port is reset. scsi: lpfc: Fix used-RPI accounting problem. ...
2017-05-24drm/amd/powerplay: fix a signedness bugsDan Carpenter
Smatch complains about a signedness bug here: vega10_hwmgr.c:4202 vega10_force_clock_level() warn: always true condition '(i >= 0) => (0-u32max >= 0)' Fixes: 7b52db39a4c2 ("drm/amd/powerplay: fix bug sclk/mclk level can't be set on vega10.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-24drm/amdgpu: fix NULL pointer panic of emit_gds_switchChunming Zhou
[ 338.384770] BUG: unable to handle kernel NULL pointer dereference at (null) [ 338.384817] IP: [< (null)>] (null) [ 338.385505] RIP: 0010:[<0000000000000000>] [< (null)>] (null) [ 338.385950] Call Trace: [ 338.385993] [<ffffffffa05d2313>] ? amdgpu_vm_flush+0x283/0x400 [amdgpu] [ 338.386025] [<ffffffff811818d3>] ? printk+0x4d/0x4f [ 338.386074] [<ffffffffa05d4906>] amdgpu_ib_schedule+0x4a6/0x4d0 [amdgpu] [ 338.386140] [<ffffffffa0673e54>] amdgpu_job_run+0x64/0x180 [amdgpu] [ 338.386203] [<ffffffffa0672e09>] amd_sched_main+0x2e9/0x4a0 [amdgpu] [ 338.386232] [<ffffffff810bfce0>] ? prepare_to_wait_event+0x110/0x110 [ 338.386295] [<ffffffffa0672b20>] ? amd_sched_select_entity+0xe0/0xe0 [amdgpu] [ 338.386327] [<ffffffff8109b423>] kthread+0xd3/0xf0 [ 338.386349] [<ffffffff8109b350>] ? kthread_park+0x60/0x60 [ 338.386376] [<ffffffff817e1ee5>] ret_from_fork+0x25/0x30 [ 338.386401] Code: Bad RIP value. [ 338.386420] RIP [< (null)>] (null) [ 338.386443] RSP <ffffc90001bd7d40> [ 338.386458] CR2: 0000000000000000 [ 338.398508] ---[ end trace 4c66fcdc74b9a0a2 ]--- Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-24drm/radeon: Unbreak HPD handling for r600+Lyude
We end up reading the interrupt register for HPD5, and then writing it to HPD6 which on systems without anything using HPD5 results in permanently disabling hotplug on one of the display outputs after the first time we acknowledge a hotplug interrupt from the GPU. This code is really bad. But for now, let's just fix this. I will hopefully have a large patch series to refactor all of this soon. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lyude <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-24drm/amd/powerplay/smu7: disable mclk switching for high refresh ratesAlex Deucher
Even if the vblank period would allow it, it still seems to be problematic on some cards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Cc: stable@vger.kernel.org Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-24drm/amd/powerplay/smu7: add vblank check for mclk switching (v2)Alex Deucher
Check to make sure the vblank period is long enough to support mclk switching. v2: drop needless initial assignment (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Cc: stable@vger.kernel.org Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-24drm/radeon/ci: disable mclk switching for high refresh rates (v2)Alex Deucher
Even if the vblank period would allow it, it still seems to be problematic on some cards. v2: fix logic inversion (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Cc: stable@vger.kernel.org Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-24drm/amdgpu/ci: disable mclk switching for high refresh rates (v2)Alex Deucher
Even if the vblank period would allow it, it still seems to be problematic on some cards. v2: fix logic inversion (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Cc: stable@vger.kernel.org Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-24Merge branch 'q-in-q-checksums'David S. Miller
Daniel Borkmann says: ==================== BPF pruning follow-up Follow-up to fix incorrect pruning when alignment tracking is in use and to properly clear regs after call to not leave stale data behind. For details, please see individual patches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24virtio-net: enable TSO/checksum offloads for Q-in-Q vlansVlad Yasevich
Since virtio does not provide it's own ndo_features_check handler, TSO, and now checksum offload, are disabled for stacked vlans. Re-enable the support and let the host take care of it. This restores/improves Guest-to-Guest performance over Q-in-Q vlans. Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24be2net: Fix offload features for Q-in-Q packetsVlad Yasevich
At least some of the be2net cards do not seem to be capabled of performing checksum offload computions on Q-in-Q packets. In these case, the recevied checksum on the remote is invalid and TCP syn packets are dropped. This patch adds a call to check disbled acceleration features on Q-in-Q tagged traffic. CC: Sathya Perla <sathya.perla@broadcom.com> CC: Ajit Khaparde <ajit.khaparde@broadcom.com> CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> CC: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24vlan: Fix tcp checksum offloads in Q-in-Q vlansVlad Yasevich
It appears that TCP checksum offloading has been broken for Q-in-Q vlans. The behavior was execerbated by the series commit afb0bc972b52 ("Merge branch 'stacked_vlan_tso'") that that enabled accleleration features on stacked vlans. However, event without that series, it is possible to trigger this issue. It just requires a lot more specialized configuration. The root cause is the interaction between how netdev_intersect_features() works, the features actually set on the vlan devices and HW having the ability to run checksum with longer headers. The issue starts when netdev_interesect_features() replaces NETIF_F_HW_CSUM with a combination of NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM, if the HW advertises IP|IPV6 specific checksums. This happens for tagged and multi-tagged packets. However, HW that enables IP|IPV6 checksum offloading doesn't gurantee that packets with arbitrarily long headers can be checksummed. This patch disables IP|IPV6 checksums on the packet for multi-tagged packets. CC: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> CC: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24drm/amdgpu: fix fundamental suspend/resume issueChristian König
Reinitializing the VM manager during suspend/resume is a very very bad idea since all the VMs are still active and kicking. This can lead to random VM faults after resume when new processes become the same client ID assigned. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2017-05-24net: phy: marvell: Limit errata to 88m1101Andrew Lunn
The 88m1101 has an errata when configuring autoneg. However, it was being applied to many other Marvell PHYs as well. Limit its scope to just the 88m1101. Fixes: 76884679c644 ("phylib: Add support for Marvell 88e1111S and 88e1145") Reported-by: Daniel Walker <danielwa@cisco.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Harini Katakam <harinik@xilinx.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24net/phy: fix mdio-octeon dependency and buildRandy Dunlap
Fix build errors by making this driver depend on OF_MDIO, like several other similar drivers do. drivers/built-in.o: In function `octeon_mdiobus_remove': mdio-octeon.c:(.text+0x196ee0): undefined reference to `mdiobus_unregister' mdio-octeon.c:(.text+0x196ee8): undefined reference to `mdiobus_free' drivers/built-in.o: In function `octeon_mdiobus_probe': mdio-octeon.c:(.text+0x196f1d): undefined reference to `devm_mdiobus_alloc_size' mdio-octeon.c:(.text+0x196ffe): undefined reference to `of_mdiobus_register' mdio-octeon.c:(.text+0x197010): undefined reference to `mdiobus_free' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24Merge tag 'mlx5-fixes-2017-05-23' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2017-05-23 Some TC offloads fixes from Or Gerlitz. From Erez, mlx5 IPoIB RX fix to improve GRO. From Mohamad, Command interface fix to improve mitigation against FW commands timeouts. From Tariq, Driver load Tolerance against affinity settings failures. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24Merge tag 'mac80211-for-davem-2017-05-23' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just two fixes this time: * fix the scheduled scan "BUG: scheduling while atomic" * check mesh address extension flags more strictly ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24net: rtnetlink: bail out from rtnl_fdb_dump() on parse errorAlexander Potapenko
rtnl_fdb_dump() failed to check the result of nlmsg_parse(), which led to contents of |ifm| being uninitialized because nlh->nlmsglen was too small to accommodate |ifm|. The uninitialized data may affect some branches and result in unwanted effects, although kernel data doesn't seem to leak to the userspace directly. The bug has been detected with KMSAN and syzkaller. For the record, here is the KMSAN report: ================================================================== BUG: KMSAN: use of unitialized memory in rtnl_fdb_dump+0x5dc/0x1000 CPU: 0 PID: 1039 Comm: probe Not tainted 4.11.0-rc5+ #2727 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x143/0x1b0 lib/dump_stack.c:52 kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:1007 __kmsan_warning_32+0x66/0xb0 mm/kmsan/kmsan_instr.c:491 rtnl_fdb_dump+0x5dc/0x1000 net/core/rtnetlink.c:3230 netlink_dump+0x84f/0x1190 net/netlink/af_netlink.c:2168 __netlink_dump_start+0xc97/0xe50 net/netlink/af_netlink.c:2258 netlink_dump_start ./include/linux/netlink.h:165 rtnetlink_rcv_msg+0xae9/0xb40 net/core/rtnetlink.c:4094 netlink_rcv_skb+0x339/0x5a0 net/netlink/af_netlink.c:2339 rtnetlink_rcv+0x83/0xa0 net/core/rtnetlink.c:4110 netlink_unicast_kernel net/netlink/af_netlink.c:1272 netlink_unicast+0x13b7/0x1480 net/netlink/af_netlink.c:1298 netlink_sendmsg+0x10b8/0x10f0 net/netlink/af_netlink.c:1844 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 ___sys_sendmsg+0xd4b/0x10f0 net/socket.c:1997 __sys_sendmsg net/socket.c:2031 SYSC_sendmsg+0x2c6/0x3f0 net/socket.c:2042 SyS_sendmsg+0x87/0xb0 net/socket.c:2038 do_syscall_64+0x102/0x150 arch/x86/entry/common.c:285 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:246 RIP: 0033:0x401300 RSP: 002b:00007ffc3b0e6d58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002b0 RCX: 0000000000401300 RDX: 0000000000000000 RSI: 00007ffc3b0e6d80 RDI: 0000000000000003 RBP: 00007ffc3b0e6e00 R08: 000000000000000b R09: 0000000000000004 R10: 000000000000000d R11: 0000000000000246 R12: 0000000000000000 R13: 00000000004065a0 R14: 0000000000406630 R15: 0000000000000000 origin: 000000008fe00056 save_stack_trace+0x59/0x60 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:352 kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:247 kmsan_poison_shadow+0x6d/0xc0 mm/kmsan/kmsan.c:260 slab_alloc_node mm/slub.c:2743 __kmalloc_node_track_caller+0x1f4/0x390 mm/slub.c:4349 __kmalloc_reserve net/core/skbuff.c:138 __alloc_skb+0x2cd/0x740 net/core/skbuff.c:231 alloc_skb ./include/linux/skbuff.h:933 netlink_alloc_large_skb net/netlink/af_netlink.c:1144 netlink_sendmsg+0x934/0x10f0 net/netlink/af_netlink.c:1819 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 ___sys_sendmsg+0xd4b/0x10f0 net/socket.c:1997 __sys_sendmsg net/socket.c:2031 SYSC_sendmsg+0x2c6/0x3f0 net/socket.c:2042 SyS_sendmsg+0x87/0xb0 net/socket.c:2038 do_syscall_64+0x102/0x150 arch/x86/entry/common.c:285 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:246 ================================================================== and the reproducer: ================================================================== #include <sys/socket.h> #include <net/if_arp.h> #include <linux/netlink.h> #include <stdint.h> int main() { int sock = socket(PF_NETLINK, SOCK_DGRAM | SOCK_NONBLOCK, 0); struct msghdr msg; memset(&msg, 0, sizeof(msg)); char nlmsg_buf[32]; memset(nlmsg_buf, 0, sizeof(nlmsg_buf)); struct nlmsghdr *nlmsg = nlmsg_buf; nlmsg->nlmsg_len = 0x11; nlmsg->nlmsg_type = 0x1e; // RTM_NEWROUTE = RTM_BASE + 0x0e // type = 0x0e = 1110b // kind = 2 nlmsg->nlmsg_flags = 0x101; // NLM_F_ROOT | NLM_F_REQUEST nlmsg->nlmsg_seq = 0; nlmsg->nlmsg_pid = 0; nlmsg_buf[16] = (char)7; struct iovec iov; iov.iov_base = nlmsg_buf; iov.iov_len = 17; msg.msg_iov = &iov; msg.msg_iovlen = 1; sendmsg(sock, &msg, 0); return 0; } ================================================================== Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24net: fec: add post PHY reset delay DT propertyQuentin Schulz
Some PHY require to wait for a bit after the reset GPIO has been toggled. This adds support for the DT property `phy-reset-post-delay` which gives the delay in milliseconds to wait after reset. If the DT property is not given, no delay is observed. Post reset delay greater than 1000ms are invalid. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24Merge branch 'sctp-dupcookie-fixes'David S. Miller
Xin Long says: ==================== sctp: a bunch of fixes for processing dupcookie After introducing transport hashtable and per stream info into sctp, some regressions were caused when processing dupcookie, this patchset is to fix them. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24sctp: set new_asoc temp when processing dupcookieXin Long
After sctp changed to use transport hashtable, a transport would be added into global hashtable when adding the peer to an asoc, then the asoc can be got by searching the transport in the hashtbale. The problem is when processing dupcookie in sctp_sf_do_5_2_4_dupcook, a new asoc would be created. A peer with the same addr and port as the one in the old asoc might be added into the new asoc, but fail to be added into the hashtable, as they also belong to the same sk. It causes that sctp's dupcookie processing can not really work. Since the new asoc will be freed after copying it's information to the old asoc, it's more like a temp asoc. So this patch is to fix it by setting it as a temp asoc to avoid adding it's any transport into the hashtable and also avoid allocing assoc_id. An extra thing it has to do is to also alloc stream info for any temp asoc, as sctp dupcookie process needs it to update old asoc. But I don't think it would hurt something, as a temp asoc would always be freed after finishing processing cookie echo packet. Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24sctp: fix stream update when processing dupcookieXin Long
Since commit 3dbcc105d556 ("sctp: alloc stream info when initializing asoc"), stream and stream.out info are always alloced when creating an asoc. So it's not correct to check !asoc->stream before updating stream info when processing dupcookie, but would be better to check asoc state instead. Fixes: 3dbcc105d556 ("sctp: alloc stream info when initializing asoc") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24MAINTAINERS/serial: Change maintainer of jsm driverGuilherme G. Piccoli
Gabriel will no longer maintain this driver, so I'm adding myself as maintainer. Thanks for all your work on jsm driver Gabriel. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Gabriel Krisman Bertazi <gabriel@krisman.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-24ceph: check that the new inode size is within limits in ceph_fallocate()Luis Henriques
Currently the ceph client doesn't respect the rlimit in fallocate. This means that a user can allocate a file with size > RLIMIT_FSIZE. This patch adds the call to inode_newsize_ok() to verify filesystem limits and ulimits. This should make ceph successfully run xfstest generic/228. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-05-24libceph: cleanup old messages according to reconnect seqYan, Zheng
when reopen a connection, use 'reconnect seq' to clean up messages that have already been received by peer. Link: http://tracker.ceph.com/issues/18690 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-05-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ptrace fix from Eric Biederman: "This fixes a brown paper bag bug. When I fixed the ptrace interaction with user namespaces I added a new field ptracer_cred in struct_task and I failed to properly initialize it on fork. This dangling pointer wound up breaking runing setuid applications run from the enlightenment window manager. As this is the worst sort of bug. A regression breaking user space for no good reason let's get this fixed" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ptrace: Properly initialize ptracer_cred on fork
2017-05-24Merge tag 'mmc-v4.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC host fixes intended for v4.12 rc3: - sdhci-xenon: Don't free data for phy allocated by devm* - sdhci-iproc: Suppress spurious interrupts - cavium: Fix probing race with regulator - cavium: Prevent crash with incomplete DT - cavium-octeon: Use proper GPIO name for power control - cavium-octeon: Fix interrupt enable code" * tag 'mmc-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-iproc: suppress spurious interrupt with Multiblock read mmc: cavium: Fix probing race with regulator of/platform: Make of_platform_device_destroy globally visible mmc: cavium: Prevent crash with incomplete DT mmc: cavium-octeon: Use proper GPIO name for power control mmc: cavium-octeon: Fix interrupt enable code mmc: sdhci-xenon: kill xenon_clean_phy()
2017-05-24x86/alternatives: Prevent uninitialized stack byte read in apply_alternatives()Mateusz Jurczyk
In the current form of the code, if a->replacementlen is 0, the reference to *insnbuf for comparison touches potentially garbage memory. While it doesn't affect the execution flow due to the subsequent a->replacementlen comparison, it is (rightly) detected as use of uninitialized memory by a runtime instrumentation currently under my development, and could be detected as such by other tools in the future, too (e.g. KMSAN). Fix the "false-positive" by reordering the conditions to first check the replacement instruction length before referencing specific opcode bytes. Signed-off-by: Mateusz Jurczyk <mjurczyk@google.com> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Link: http://lkml.kernel.org/r/20170524135500.27223-1-mjurczyk@google.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-05-24x86/PAT: Fix Xorg regression on CPUs that don't support PATMikulas Patocka
In the file arch/x86/mm/pat.c, there's a '__pat_enabled' variable. The variable is set to 1 by default and the function pat_init() sets __pat_enabled to 0 if the CPU doesn't support PAT. However, on AMD K6-3 CPUs, the processor initialization code never calls pat_init() and so __pat_enabled stays 1 and the function pat_enabled() returns true, even though the K6-3 CPU doesn't support PAT. The result of this bug is that a kernel warning is produced when attempting to start the Xserver and the Xserver doesn't start (fork() returns ENOMEM). Another symptom of this bug is that the framebuffer driver doesn't set the K6-3 MTRR registers: x86/PAT: Xorg:3891 map pfn expected mapping type uncached-minus for [mem 0xe4000000-0xe5ffffff], got write-combining ------------[ cut here ]------------ WARNING: CPU: 0 PID: 3891 at arch/x86/mm/pat.c:1020 untrack_pfn+0x5c/0x9f ... x86/PAT: Xorg:3891 map pfn expected mapping type uncached-minus for [mem 0xe4000000-0xe5ffffff], got write-combining To fix the bug change pat_enabled() so that it returns true only if PAT initialization was actually done. Also, I changed boot_cpu_has(X86_FEATURE_PAT) to this_cpu_has(X86_FEATURE_PAT) in pat_ap_init(), so that we check the PAT feature on the processor that is being initialized. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: stable@vger.kernel.org # v4.2+ Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1704181501450.26399@file01.intranet.prod.int.rdu2.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>