summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-11-30serial: 8250_mid fix calltrace when hotplug 8250 serial controllerLiwei Song
Fix the following Calltrace: [ 77.768221] WARNING: CPU: 5 PID: 645 at drivers/dma/dmaengine.c:1069 dma_async_device_unregister+0xe2/0xf0 [ 77.775058] dma_async_device_unregister called while 1 clients hold a reference [ 77.825048] CPU: 5 PID: 645 Comm: sh Not tainted 4.8.8-WR9.0.0.0_standard+ #3 [ 77.832550] Hardware name: Intel Corp. Aspen Cove/Server, BIOS HAVLCRB1.X64.0012.D58.1604140405 04/14/2016 [ 77.840396] 0000000000000000 ffffc90008adbc80 ffffffff81403456 ffffc90008adbcd0 [ 77.848245] 0000000000000000 ffffc90008adbcc0 ffffffff8105e2e1 0000042d08adbf20 [ 77.855934] ffff88046a861c18 ffff88046a85c420 ffffffff820d4200 ffff88046ae92318 [ 77.863601] Call Trace: [ 77.871113] [<ffffffff81403456>] dump_stack+0x4f/0x69 [ 77.878655] [<ffffffff8105e2e1>] __warn+0xd1/0xf0 [ 77.886102] [<ffffffff8105e34f>] warn_slowpath_fmt+0x4f/0x60 [ 77.893508] [<ffffffff814187a9>] ? find_next_bit+0x19/0x20 [ 77.900730] [<ffffffff814bf83e>] ? dma_channel_rebalance+0x23e/0x270 [ 77.907814] [<ffffffff814bfee2>] dma_async_device_unregister+0xe2/0xf0 [ 77.914992] [<ffffffff814c53aa>] hsu_dma_remove+0x1a/0x60 [ 77.921977] [<ffffffff814ee14c>] dnv_exit+0x1c/0x20 [ 77.928752] [<ffffffff814edff6>] mid8250_remove+0x26/0x40 [ 77.935607] [<ffffffff8144f1b9>] pci_device_remove+0x39/0xc0 [ 77.942292] [<ffffffff8160cfea>] __device_release_driver+0x9a/0x140 [ 77.948836] [<ffffffff8160d0b3>] device_release_driver+0x23/0x30 [ 77.955364] [<ffffffff81447dcc>] pci_stop_bus_device+0x8c/0xa0 [ 77.961769] [<ffffffff81447f0a>] pci_stop_and_remove_bus_device_locked+0x1a/0x30 [ 77.968113] [<ffffffff81450d4e>] remove_store+0x5e/0x70 [ 77.974267] [<ffffffff81607ed8>] dev_attr_store+0x18/0x30 [ 77.980243] [<ffffffff8123006a>] sysfs_kf_write+0x3a/0x50 [ 77.986180] [<ffffffff8122f5ab>] kernfs_fop_write+0x10b/0x190 [ 77.992118] [<ffffffff811bf1c8>] __vfs_write+0x18/0x40 [ 77.998032] [<ffffffff811bfdee>] vfs_write+0xae/0x190 [ 78.003747] [<ffffffff811c1016>] SyS_write+0x46/0xb0 [ 78.009234] [<ffffffff81a4c31b>] entry_SYSCALL_64_fastpath+0x13/0x8f [ 78.014809] ---[ end trace 0c36dd73b7408eb2 ]--- This happens when the 8250 serial controller is hotplugged as follows: echo 1 > /sys/bus/pci/devices/0000:00:1a.0/remove This trace happens due to the serial port still holding a reference when the dma device is unregistered. The dma unregister routine will check if there is still a reference exist, if so it will give the WARNING(here serial port still was not unregister). To fix this, We need to unregister the serial port first, then do DMA device unregister to make sure there is no reference when to DMA routine. Signed-off-by: Liwei Song <liwei.song@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29console: Move userspace I/O out of console_lock to fix lockdep warningWaiman Long
When running certain workload on a debug kernel with lockdep turned on, a ppc64 kvm guest could sometimes hit the following lockdep warning: [ INFO: possible circular locking dependency detected ] Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&mm->mmap_sem); lock(console_lock); lock(&mm->mmap_sem); lock(cpu_hotplug.lock); *** DEADLOCK *** Looking at the console code, the console_lock-->mmap_sem scenario will only happen when reading or writing the console unicode map leading to a page fault. To break this circular locking dependency, all the userspace I/O operations in consolemap.c are now moved outside of the console_lock critical sections so that the mmap_sem won't be acquired when holding the console_lock. Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29tty: nozomi: avoid sprintf buffer overflowArnd Bergmann
Testing with a gcc-7 snapshot produced an internal compiler error for this file: drivers/tty/nozomi.c: In function 'receive_flow_control': drivers/tty/nozomi.c:919:12: internal compiler error: in get_substring_ranges_for_loc, at input.c:1388 static int receive_flow_control(struct nozomi *dc) I've reported this at https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78569 but also noticed that the code line contains a stack overflow, as it prints a string into a slightly shorter fixed-length 'tmp' variable. A lot of the code here is unnecessary and can be expressed in a simpler way, relying on the fact that removing the 'DEBUG' macro will also get rid of all pr_debug() calls. This change should not change any of the output but avoids both the stack overflow and the gcc crash. The stack overflow will not happen unless a module load parameter is also set to enable the debug messages. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29serial: 8250_pci: Detach low-level driver during PCI error recoveryGabriel Krisman Bertazi
During a PCI error recovery, like the ones provoked by EEH in the ppc64 platform, all IO to the device must be blocked while the recovery is completed. Current 8250_pci implementation only suspends the port instead of detaching it, which doesn't prevent incoming accesses like TIOCMGET and TIOCMSET calls from reaching the device. Those end up racing with the EEH recovery, crashing it. Similar races were also observed when opening the device and when shutting it down during recovery. This patch implements a more robust IO blockage for the 8250_pci recovery by unregistering the port at the beginning of the procedure and re-adding it afterwards. Since the port is detached from the uart layer, we can be sure that no request will make through to the device during recovery. This is similar to the solution used by the JSM serial driver. I thank Peter Hurley <peter@hurleysoftware.com> for valuable input on this one over one year ago. Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-28serial: core: don't check port twice in a rowAndy Shevchenko
There is no need to check port for NULL in uart_port_deref() since we call it only when port is defined. There are few places that violate this. Fix them here as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-16mxs-auart: count FIFO overrun errorsWolfgang Ocker
The mxs-auart driver does not count FIFO overrun errors. These errors never appear in /proc/tty/driver/ttyAPP. This is because the OERR status bit is masked by read_status_mask in the rx interrupt function, but the AUART_STAT_OERR bit is never set in read_status_mask. The patch enables the counting of overrun errors. Signed-off-by: Wolfgang Ocker <weo@reccoware.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-16serial: 8250_dw: Add support for IrDA SIR modeEd Blake
Add a set_ldisc function to enable/disable IrDA SIR mode according to the new line discipline, if IrDA SIR mode is supported by the hardware configuration. Signed-off-by: Ed Blake <ed.blake@imgtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-16serial: 8250: Expose set_ldisc functionEd Blake
Expose set_ldisc() function so that it can be overridden with a platform specific implementation. Signed-off-by: Ed Blake <ed.blake@imgtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-16serial: 8250: Add IrDA to UART capabilitiesEd Blake
Add an IrDA UART capability flag and change the type of uart_8250_port.capabilities to be u32 rather than unsigned short to accommodate the additional flag. Signed-off-by: Ed Blake <ed.blake@imgtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-16serial: 8250_dma: power off device after TX is doneAndy Shevchenko
When any 8250 based driver sets up DMA and has UART_CAP_RPM capability enabled the device is left powered on after transfer is done. We need to schedule a device suspend operation when DMA completes the transfer. The patch is based on the work done by the reporter. Reported-by: Huiquan Zhong <huiquan.zhong@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-16serial: 8250_port: export serial8250_rpm_{get|put}_tx()Andy Shevchenko
The following fix of runtime PM use in DMA mode requires at least serial8250_rpm_put_tx() to be available. Export both calls. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-16serial: sunsu: Free memory when probe failsSouptick Joarder
When su_probe() fails it doesn't free *up and we may have a memory leak. Fix this by freeing *up before return. Signed-off-by: Souptick joarder <jrdr.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-16serial: sunhv: Free memory when remove() is calledSouptick Joarder
In each call to hv_remove(), con_read_page and con_write_page is not getting freed and lead to memory leakage. Fix this by freeing both pointers in hv_remove(). Signed-off-by: Souptick joarder <jrdr.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-16vt: fix Scroll Lock LED trigger nameMaciej S. Szmigiero
There is a disagreement between drivers/tty/vt/keyboard.c and drivers/input/input-leds.c with regard to what is a Scroll Lock LED trigger name: input calls it "kbd-scrolllock", but vt calls it "kbd-scrollock" (two l's). This prevents Scroll Lock LED trigger from binding to this LED by default. Since it is a scroLL Lock LED, this interface was introduced only about a year ago and in an Internet search people seem to reference this trigger only to set it to this LED let's simply rename it to "kbd-scrolllock". Also, it looks like this was supposed to be changed before this code was merged: https://lkml.org/lkml/2015/6/9/697 but it was done only on the input side. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: stable <stable@vger.kernel.org> # 4.2+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10tty: typo in comments in drivers/tty/vt/keyboard.cAskar Safin
Fixed typo in comments in drivers/tty/vt/keyboard.c Signed-off-by: Askar Safin <safinaskar@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10tty: amba-pl011: Add earlycon support for SBSA UARTKefeng Wang
Declare an OF early console for SBSA UART so that the early console device can be specified via the "stdout-path" property in device-tree. Cc: Russell King <linux@armlinux.org.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10tty: nozomi: use permission-specific DEVICE_ATTR variantsJulia Lawall
Use DEVICE_ATTR_RO for read only attributes. This simplifies the source code, improves readbility, and reduces the chance of inconsistencies. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @ro@ declarer name DEVICE_ATTR; identifier x,x_show; @@ DEVICE_ATTR(x, \(0444\|S_IRUGO\), x_show, NULL); @script:ocaml@ x << ro.x; x_show << ro.x_show; @@ if not (x^"_show" = x_show) then Coccilib.include_match false @@ declarer name DEVICE_ATTR_RO; identifier ro.x,ro.x_show; @@ - DEVICE_ATTR(x, \(0444\|S_IRUGO\), x_show, NULL); + DEVICE_ATTR_RO(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10tty: serial: Make the STM32 serial port depend on it's archPeter Robinson
The STM32 serial port is SoC specific so no point enabling it without the architecture enabled. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10serial: ifx6x60: Free memory when probe failsSouptick Joarder
When spi_setup() fails it doesn't free ifx_dev and we have a memory leak. Fix this by freeing ifx_dev before the return. Signed-off-by: Souptick joarder <jrdr.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10serial: ioc4_serial: Free memory when kzalloc fails during probeSouptick Joarder
Inside ioc4_attach_local() 4 memory was allocated using kzalloc and assign it to ports[] within loop. When kzalloc fails inside loop, it returns error without freeing previously allocated memory and we may have memory leak. Fix this by freeing ports[] before return. Signed-off-by: Souptick joarder <jrdr.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10serial: pxa2xx: mark PM functions as __maybe_unusedArnd Bergmann
The fresh new serial driver for pxa produces warnings when CONFIG_PM_SLEEP is disabled: drivers/tty/serial/8250/8250_pxa.c:50:12: error: 'serial_pxa_resume' defined but not used [-Werror=unused-function] drivers/tty/serial/8250/8250_pxa.c:41:12: error: 'serial_pxa_suspend' defined but not used [-Werror=unused-function] This removes the #ifdef around the two functions and instead marks both as __maybe_unused, which is more robust and avoids the warning. Fixes: ab28f51c77cd ("serial: rewrite pxa2xx-uart to use 8250_core") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10serial: pxa2xx: remove __deprecated annotationArnd Bergmann
An otherwise very nice cleanup of the pxa2xx uart support marked the init function of this driver as __deprecated: drivers/tty/serial/pxa.c:944:1: error: 'serial_pxa_init' is deprecated [-Werror=deprecated-declarations] This seems unhelpful to me, as we now warn for every allmodconfig build, which is otherwise free of warnings on most architectures. Let's remove the annotation again. Fixes: ab28f51c77cd ("serial: rewrite pxa2xx-uart to use 8250_core") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10serial: crisv10: fix invalid user-pointer checkJohan Hovold
Drop invalid user-pointer check from TIOCGSERIAL handler. A NULL-pointer can be valid in user space and copy_to_user() takes care of sanity checking. Cc: Mikael Starvik <starvik@axis.com> Cc: linux-cris-kernel@axis.com Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10tty: rocket: fix invalid user-pointer checksJohan Hovold
Drop invalid user-pointer checks from custom ioctl handlers. A NULL-pointer can be valid in user space and copy_to_user() takes care of sanity checking. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10tty: amiserial: fix invalid user-pointer checkJohan Hovold
Drop invalid user-pointer check from TIOCGSERIAL handler. A NULL-pointer can be valid in user space and copy_to_user() takes care of sanity checking. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-108250: FIX Fourth port offset of Pericom PI7C9X7954 boardsAngelo Butti
Hi, below patch to fix Fourth port offset of Percom PI7C9X7954 boards. I had a problem using Fourth port on a pci express serial board based on Pericom PI7C9X7954. Reading datasheet I notice a "special" offset assign to this port when used in I/O mode. Offset 0x0 -> UART 0 Offset 0x8 -> UART 1 Offset 0x10 -> UART 2 Offset 0x38 -> UART 3 <<---- This don't follow a logical sequence This patch add a different init to last port, to have right offset. I check also Pericom 7952 and 7958 but that devices follow logical sequence, so they are ok. Regards, Angelo Signed-off-by: Angelo Butti <buttiangelo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10serial: sh-sci: Fix deadlock caused by serial output requestTakatoshi Akiyama
While spin is already locked, serial output request causes the deadlock, because serial output process also tries to lock the spin. This patch removes serial output with spin locked. Signed-off-by: Takatoshi Akiyama <takatoshi.akiyama.kj@ps.hitachi-solutions.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10tty: serial: make crisv10 explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: arch/cris/arch-v10/drivers/Kconfig:config ETRAX_SERIAL arch/cris/arch-v10/drivers/Kconfig: bool "Serial-port support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We don't replace module.h with init.h since the file already has that. Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-cris-kernel@axis.com Cc: linux-serial@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10serial: 8250_pxa: hide early console setup when disabledArnd Bergmann
The newly added pxa glue driver for 8250 supports console output, but fails to build if the 8250 console is disabled: drivers/tty/serial/8250/8250_pxa.o: In function `early_serial_pxa_setup': 8250_pxa.c:(.init.text+0x50): undefined reference to `early_serial8250_setup' This adds an #ifdef like the other glue drivers have it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10serial: 8250_uniphier: avoid locking for FCR register writeMasahiro Yamada
The hardware book says, the FCR is combined with a register called CHAR (it will trigger interrupt when a specific character is received). At first, I used lock/read/modify/write/unlock dance for the FCR to not affect the upper bits, but the CHAR is actually never used. It should not hurt to always clear the CHAR and to handle the FCR as a normal case. It can save the costly locking. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by: Denys Vlasenko <dvlasenk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10serial: 8250_uniphier: hardcode regshift to avoid unneeded memory readMasahiro Yamada
For this driver, uart_port::regshift is always 2. Hardcode the shift value instead of reading ->regshift to get an already known value. (pointed out by Denys Vlasenko) Furthermore, I am using register macros that are already shifted, which will save code a bit. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-30Merge 4.9-rc3 into tty-nextGreg Kroah-Hartman
We want the serial/tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-29Linux 4.9-rc3Linus Torvalds
2016-10-29Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 bugfix from Thomas Gleixner: "A single bugfix for the recent changes related to registering the boot cpu when this has not happened before prefill_possible_map(). The main problem with this change got fixed already, but we missed the case where the local APIC is not yet mapped, when prefill_possible_map() is invoked, so the registration of the boot cpu which has the APIC bit set in CPUID will explode. I should have seen that issue earlier, but all I can do now is feeling embarassed" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smpboot: Init apic mapping before usage
2016-10-29Merge tag 'upstream-4.9-rc3' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull ubi/ubifs fixes from Richard Weinberger: "This contains fixes for issues in both UBI and UBIFS: - A regression wrt overlayfs, introduced in -rc2. - An UBI issue, found by Dan Carpenter's static checker" * tag 'upstream-4.9-rc3' of git://git.infradead.org/linux-ubifs: ubifs: Fix regression in ubifs_readdir() ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap()
2016-10-29Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "We haven't seen a whole lot of fixes for the first two weeks since the merge window, but here is the batch that we have at the moment. Nothing sticks out as particularly bad or scary, it's mostly a handful of smaller fixes to several platforms. The Uniphier reset controller changes could probably have been delayed to 4.10, but they're not scary and just plumbing up driver changes that went in during the merge window. We're also adding another maintainer to Marvell Berlin platforms, to help out when Sebastian is too busy. Yay teamwork!" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031 ARM: dts: vf610: fix IRQ flag of global timer ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path ARM: imx: gpc: Initialize all power domains arm64: dts: Updated NAND DT properties for NS2 SVK arm64: dts: uniphier: change MIO node to SD control node ARM: dts: uniphier: change MIO node to SD control node reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER arm64: dts: Add timer erratum property for LS2080A and LS1043A arm64: dts: rockchip: remove the abuse of keep-power-in-suspend ARM: multi_v7_defconfig: Enable Intel e1000e driver MAINTAINERS: add myself as Marvell berlin SoC maintainer bus: qcom-ebi2: depend on ARCH_QCOM or COMPILE_TEST ARM: dts: fix the SD card on the Snowball arm64: dts: rockchip: remove always-on and boot-on from vcc_sd arm64: dts: marvell: fix clocksource for CP110 master SPI0 ARM: mvebu: Select corediv clk for all mvebu v7 SoC
2016-10-29Merge tag 'char-misc-4.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a few small char/misc driver fixes for reported issues. The "biggest" are two binder fixes for reported issues that have been shipping in Android phones for a while now, the others are various fixes for reported problems. And there's a MAINTAINERS update for good measure. All have been in linux-next with no reported issues" * tag 'char-misc-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: MAINTAINERS: Add entry for genwqe driver VMCI: Doorbell create and destroy fixes GenWQE: Fix bad page access during abort of resource allocation vme: vme_get_size potentially returning incorrect value on failure extcon: qcom-spmi-misc: Sync the extcon state on interrupt hv: do not lose pending heartbeat vmbus packets mei: txe: don't clean an unprocessed interrupt cause. ANDROID: binder: Clear binder and cookie when setting handle in flat binder struct ANDROID: binder: Add strong ref checks
2016-10-29Merge tag 'v4.9-rockchip-dts64-fixes1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Correct regulator handling on Rockchip arm64 boards to make bind/unbind calls work correctly and remove a sdio-only property from non-sdio mmc hosts, that accidentially was added there. * tag 'v4.9-rockchip-dts64-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: remove the abuse of keep-power-in-suspend arm64: dts: rockchip: remove always-on and boot-on from vcc_sd Signed-off-by: Olof Johansson <olof@lixom.net>
2016-10-29Merge tag 'arm-soc/for-4.9/devicetree-arm64-fixes' of ↵Olof Johansson
http://github.com/Broadcom/stblinux into fixes This pull request contains a single fix for Broadcom ARM64-based SoCs: - Ray adds the required bus width and OOB sector size properties to the Northstar 2 SVK reference board in order for the NAND controller to work properly * tag 'arm-soc/for-4.9/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux: arm64: dts: Updated NAND DT properties for NS2 SVK Signed-off-by: Olof Johansson <olof@lixom.net>
2016-10-29Merge tag 'imx-fixes-4.9' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes The i.MX fixes for 4.9: - A couple of patches from Fabio to fix the GPC power domain regression which is caused by PM Domain core change 0159ec670763dd ("PM / Domains: Verify the PM domain is present when adding a provider"), and a related kernel crash seen with multi_v7_defconfig build. - Correct the PHY ID mask for AR8031 to match phy driver code. - Apply new added timer erratum A008585 for LS1043A and LS2080A SoC. - Correct vf610 global timer IRQ flag to avoid warning from gic driver after commit 992345a58e0c ("irqchip/gic: WARN if setting the interrupt type for a PPI fails"). * tag 'imx-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031 ARM: dts: vf610: fix IRQ flag of global timer ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path ARM: imx: gpc: Initialize all power domains arm64: dts: Add timer erratum property for LS2080A and LS1043A Signed-off-by: Olof Johansson <olof@lixom.net>
2016-10-29Merge tag 'uniphier-fixes-v4.9' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into fixes UniPhier ARM SoC fixes for v4.9 - Add "select ARCH_HAS_RESET_CONTROLLER" in Kconfig - Rename wrongly-named mioctrl to sdctrl * tag 'uniphier-fixes-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: change MIO node to SD control node ARM: dts: uniphier: change MIO node to SD control node reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER Signed-off-by: Olof Johansson <olof@lixom.net>
2016-10-29Merge tag 'driver-core-4.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are two small driver core / kernfs fixes for 4.9-rc3. One makes the Kconfig entry for DEBUG_TEST_DRIVER_REMOVE a bit more explicit that this is a crazy thing to enable for a distro kernel (thanks for trying Fedora!), the other resolves an issue with vim opening kernfs files (sysfs, configfs, etc.) Both have been in linux-next with no reported issues" * tag 'driver-core-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: Make Kconfig text for DEBUG_TEST_DRIVER_REMOVE stronger kernfs: Add noop_fsync to supported kernfs_file_fops
2016-10-29Merge tag 'staging-4.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Here are some small staging and iio driver fixes for reported issues for 4.9-rc3. Nothing major, the "largest" being a lustre fix for a sysfs file that was obviously wrong, and had never been tested, so it was moved to debugfs as that is where it belongs. The others are small bug fixes for reported issues with various staging or iio drivers. All have been in linux-next for a while with no reported issues" * tag 'staging-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: greybus: fix a leak on error in gb_module_create() greybus: es2: fix error return code in ap_probe() greybus: arche-platform: Add missing of_node_put() in arche_platform_change_state() staging: android: ion: Fix error handling in ion_query_heaps() iio: accel: sca3000_core: avoid potentially uninitialized variable iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value staging/lustre/llite: Move unstable_stats from sysfs to debugfs Staging: wilc1000: Fix kernel Oops on opening the device staging: android/ion: testing the wrong variable Staging: greybus: uart: Use gbphy_dev->dev instead of bundle->dev Staging: greybus: gpio: Use gbphy_dev->dev instead of bundle->dev iio: adc: ti-adc081c: Select IIO_TRIGGERED_BUFFER to prevent build errors iio: maxim_thermocouple: Align 16 bit big endian value of raw reads
2016-10-29Merge tag 'tty-4.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are a number of small tty and serial driver fixes for reported issues for 4.9-rc3. Nothing major, but they do resolve a bunch of problems with the tty core changes that are in 4.9-rc1, and finally the atmel serial driver is back working properly. All have been in linux-next with no reported issues" * tag 'tty-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial_core: fix NULL struct tty pointer access in uart_write_wakeup tty: serial_core: Fix serial console crash on port shutdown tty/serial: at91: fix hardware handshake on Atmel platforms vt: clear selection before resizing sc16is7xx: always write state when configuring GPIO as an output sh-sci: document R8A7743/5 support tty: serial: 8250: 8250_core: NXP SC16C2552 workaround tty: limit terminal size to 4M chars tty: serial: fsl_lpuart: Fix Tx DMA edge case serial: 8250_lpss: enable MSI for sure serial: core: fix console problems on uart_close serial: 8250_uniphier: fix clearing divisor latch access bit serial: 8250_uniphier: fix more unterminated string serial: pch_uart: add terminate entry for dmi_system_id tables devicetree: bindings: uart: Add new compatible string for ZynqMP serial: xuartps: Add new compatible string for ZynqMP serial: SERIAL_STM32 should depend on HAS_DMA serial: stm32: Fix comparisons with undefined register tty: vt, fix bogus division in csi_J
2016-10-29Merge tag 'usb-4.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 4.9-rc3. There is the usual number of gadget and xhci patches in here to resolved reported issues, as well as some usb-serial driver fixes and new device ids. All have been in linux-next with no reported issues" * tag 'usb-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) usb: chipidea: host: fix NULL ptr dereference during shutdown usb: renesas_usbhs: add wait after initialization for R-Car Gen3 usb: increase ohci watchdog delay to 275 msec usb: musb: Call pm_runtime from musb_gadget_queue usb: musb: Fix hardirq-safe hardirq-unsafe lock order error usb: ehci-platform: increase EHCI_MAX_RSTS to 4 usb: ohci-at91: Set RemoteWakeupConnected bit explicitly. USB: serial: fix potential NULL-dereference at probe xhci: use default USB_RESUME_TIMEOUT when resuming ports. xhci: workaround for hosts missing CAS bit xhci: add restart quirk for Intel Wildcatpoint PCH USB: serial: cp210x: fix tiocmget error handling wusb: fix error return code in wusb_prf() Revert "Documentation: devicetree: dwc2: Deprecate g-tx-fifo-size" Revert "usb: dwc2: gadget: fix TX FIFO size and address initialization" Revert "usb: dwc2: gadget: change variable name to more meaningful" USB: serial: ftdi_sio: add support for Infineon TriBoard TC2X7 wusb: Stop using the stack for sg crypto scratch space usb: dwc3: Fix size used in dma_free_coherent() usb: gadget: f_fs: stop sleeping in ffs_func_eps_disable ...
2016-10-29x86/smpboot: Init apic mapping before usageThomas Gleixner
The recent changes, which forced the registration of the boot cpu on UP systems, which do not have ACPI tables, have been fixed for systems w/o local APIC, but left a wreckage for systems which have neither ACPI nor mptables, but the CPU has an APIC, e.g. virtualbox. The boot process crashes in prefill_possible_map() as it wants to register the boot cpu, which needs to access the local apic, but the local APIC is not yet mapped. There is no reason why init_apic_mapping() can't be invoked before prefill_possible_map(). So instead of playing another silly early mapping game, as the ACPI/mptables code does, we just move init_apic_mapping() before the call to prefill_possible_map(). In hindsight, I should have noticed that combination earlier. Sorry for the churn (also in stable)! Fixes: ff8560512b8d ("x86/boot/smp: Don't try to poke disabled/non-existent APIC") Reported-and-debugged-by: Michal Necasek <michal.necasek@oracle.com> Reported-and-tested-by: Wolfgang Bauer <wbauer@tmo.at> Cc: prarit@redhat.com Cc: ville.syrjala@linux.intel.com Cc: michael.thayer@oracle.com Cc: knut.osmundsen@oracle.com Cc: frank.mehnert@oracle.com Cc: Borislav Petkov <bp@alien8.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1610282114380.5053@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-28Merge tag 'acpi-4.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix recent ACPICA regressions, an older PCI IRQ management regression, and an incorrect return value of a function in the APEI code. Specifics: - Fix three ACPICA issues related to the interpreter locking and introduced by recent changes in that area (Lv Zheng). - Fix a PCI IRQ management regression introduced during the 4.7 cycle and related to the configuration of shared IRQs on systems with an ISA bus (Sinan Kaya). - Fix up a return value of one function in the APEI code (Punit Agrawal)" * tag 'acpi-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region() ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method() ACPICA: Dispatcher: Fix order issue of method termination ACPI / APEI: Fix incorrect return value of ghes_proc() ACPI/PCI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQs ACPI/PCI: pci_link: penalize SCI correctly ACPI/PCI/IRQ: assign ISA IRQ directly during early boot stages
2016-10-28Merge tag 'pm-4.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix two intel_pstate issues related to the way it works when the scaling_governor sysfs attribute is set to "performance" and fix up messages in the system suspend core code. Specifics: - Fix a missing KERN_CONT in a system suspend message by converting the affected code to using pr_info() and pr_cont() instead of the "raw" printk() (Jon Hunter). - Make intel_pstate set the CPU P-state from its .set_policy() callback when the scaling_governor sysfs attribute is set to "performance" so that it interacts with NOHZ_FULL more predictably which was the case before 4.7 (Rafael Wysocki). - Make intel_pstate always request the maximum allowed P-state when the scaling_governor sysfs attribute is set to "performance" to prevent it from effectively ingoring that setting is some situations (Rafael Wysocki)" * tag 'pm-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Always set max P-state in performance mode PM / suspend: Fix missing KERN_CONT for suspend message cpufreq: intel_pstate: Set P-state upfront in performance mode
2016-10-28Merge tag 'arc-4.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - support IDU intc for UP builds - support gz, lzma compressed uImage [Daniel Mentz] - adjust /proc/cpuinfo for non-continuous cpu ids [Noam Camus] - syscall for userspace cmpxchg assist for configs lacking hardware atomics - rework of boot log printing mainly for identifying older arc700 cores - retiring some old code, build toggles * tag 'arc-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: module: print pretty section names ARC: module: elide loop to save reference to .eh_frame ARC: mm: retire ARC_DBG_TLB_MISS_COUNT... ARC: build: retire old toggles ARC: boot log: refactor cpu name/release printing ARC: boot log: remove awkward space comma from MMU line ARC: boot log: don't assume SWAPE instruction support ARC: boot log: refactor printing abt features not captured in BCRs ARCv2: boot log: print IOC exists as well as enabled status ARCv2: IOC: use @ioc_enable not @ioc_exist where intended ARC: syscall for userspace cmpxchg assist ARC: fix build warning in elf.h ARC: Adjust cpuinfo for non-continuous cpu ids ARC: [build] Support gz, lzma compressed uImage ARCv2: intc: untangle SMP, MCIP and IDU
2016-10-29Merge branches 'acpica-fixes', 'acpi-pci-fixes' and 'acpi-apei-fixes'Rafael J. Wysocki
* acpica-fixes: ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region() ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method() ACPICA: Dispatcher: Fix order issue of method termination * acpi-pci-fixes: ACPI/PCI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQs ACPI/PCI: pci_link: penalize SCI correctly ACPI/PCI/IRQ: assign ISA IRQ directly during early boot stages * acpi-apei-fixes: ACPI / APEI: Fix incorrect return value of ghes_proc()
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 23:41:34 +0000