summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-11-11ath6kl: move htc_hif to hif.cKalle Valo
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: return error block size is not power of 2Kalle Valo
Currently only a warning is emitted but no error is returned. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: fix struct host_app_area endian handlingKalle Valo
It was missing endian annotation. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: remove unused parameters from struct wmiKalle Valo
There's no use for these, at least right now, so better to remove them. If some of them are ever needed, we can always add them back. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: make sure WLAN power save is enabled during suspendChilam Ng
Power save is enabled during ath6kl init. But when user space disables power save, the system will go into suspend with power save disabled. The ath6kl driver will now explicitly enable power save prior to entering suspend and restore its previous setting upon resume Signed-off-by: Chilam Ng <chilamng@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: Minor cleanup in msg_look_ahead parameter in ↵Vasanthakumar Thiagarajan
ath6kl_htc_rxmsg_pending_handler() It is just a four byte information of the received message from ath6kl_htc_rxmsg_pending_handler(). Remove unnecessary array representaion. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: Avoid processing failed rx packetsVasanthakumar Thiagarajan
It is not necessary to process an htc_packet which is allocated for rx but failed in sdio rx. Though it does not fix any real issue, it does not make much sense to process the failed frame. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: Fix htc_packet leak in ath6kl_htc_rx_fetch()Vasanthakumar Thiagarajan
It is found during the code review. As the leak would happen only in failure case, the imapct is not easily visible. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: Fix htc_packet leak in ath6kl_htc_rx_process_packets()Vasanthakumar Thiagarajan
Packet is not reclaimed when ath6kl_htc_rx_process_hdr() fails. Fix this by deferring the packet deletion from comp_pktq till ath6kl_htc_rx_process_hdr() returns success. This bug is found in code review, impact is not easily visible as the leak happens only in failure cases. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: Claim sdio function only at appropriate placesVasanthakumar Thiagarajan
There are places where tx_complete callbacks are called with claiming the sdio function. It is not necessary to hold the sdio func for longer. This may even affect the host side power save, if it is supported by the controller. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: Replace spin_lock_irqsave with spin_lock_bhVasanthakumar Thiagarajan
It is not necessary to use spinlock primitive to protect data which is accessed in hard irq context as nothing is running in hard irq with this driver. The spinlock primitive meant to protect data in softirq context is more appropriate. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: Fix sparse warning "symbol 'conn' shadows an earlier one"Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: Enable force foreground scan in connected stateVasanthakumar Thiagarajan
This was disabled beacause there was a network stall issue when scan is issued. This issue does not happen with the new firmware (3.1.1.609), enable it back. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-09mwifiex: prevent corruption instead of just warningDan Carpenter
Probably we never hit this condition, but in case we do, we may as well put a return here instead of just printing a warning message and then corrupting memory. The caller doesn't check the return code. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09mwifiex: enable SDIO multiport aggregationAmitkumar Karwar
By default SDIO multiport aggregation is disabled. It's useful to get good throughput results. This patch enables it. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09mwifiex: remove an unneeded NULL checkDan Carpenter
We dereference adapter in the error handling code so this needed to be fixed. This function is always called like: adapter->if_ops.host_to_card(adapter, ...); so adapter can never be NULL and I've removed the NULL check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09mwifiex: remove unneeded kfree(NULL);Dan Carpenter
The previous if statement means this that pointer is NULL so there is no need to free it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09net/rfkill/core.c: use kstrtoul, etcJulia Lawall
Use kstrtoul, etc instead of the now deprecated strict_strtoul, etc. A semantic patch rule for the kstrtoul case is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,b; {int,long} *c; @@ -strict_strtoul +kstrtoul (a,b,c) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09net/mac80211/debugfs.c: use kstrtoul, etcJulia Lawall
Use kstrtoul, etc instead of the now deprecated strict_strtoul, etc. A semantic patch rule for the kstrtoul case is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,b; {int,long} *c; @@ -strict_strtoul +kstrtoul (a,b,c) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09mac80211: implement wifi TX statusJohannes Berg
Implement the socket wifi TX status error queue reflection in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09nl80211: advertise socket TX status capabilityJohannes Berg
The new wifi socket TX capability should be supported by wifi drivers, let them advertise whether they do or not. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09mac80211: Also report the STA's TDLS flag via nl80211Helmut Schaa
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09brcm80211: fmac: optimize chip core info managementFranky Lin
Prepare for adding backplane interconnect type support Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09brcm80211: fmac: replace private SB macros with ssb_regs versionFranky Lin
Use SSB macros in order to clean up brcmfmac code Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09brcm80211: fmac: move chip drive strength related code to sdio_chip.cFranky Lin
This patch is part of the abstracting chip backplane handle code series. Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09brcm80211: fmac: move chip detach function to sdio_chip.cFranky Lin
This patch is part of the abstracting chip backplane handle code series. Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09brcm80211: fmac: move chip reset core function to sdio_chip.cFranky Lin
This patch is part of the abstracting chip backplane handle code series. Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09brcm80211: fmac: abstract chip core revision functionFranky Lin
Prepare for adding backplane interconnect type support Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09brcm80211: fmac: abstract chip iscoreup functionFranky Lin
Prepare for adding backplane interconnect type support Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09brcm80211: fmac: chip attach code flow clean upFranky Lin
Merged brcmf_sdbrcm_chip_attach into brcmf_sdio_chip_attach for better readability. Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09brcm80211: fmac: remove duplicate regiter set in chip attach pathFranky Lin
Same register writes have been done in brcmf_sdbrcm_probe_init which is earlier in the same code path. Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09brcm80211: fmac: move dongle gpio reset code to chip attach functionFranky Lin
This patch is part of the abstracting chip backplane handle code series. Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09brcm80211: fmac: disable dongle arm core in bus core setup functionFranky Lin
This will provide a better code flow that fits the logic Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09brcm80211: fmac: move core disable function to sdio_chip.cFranky Lin
This patch is part of the abstracting chip backplane handle code series. Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09brcm80211: fmac: abstract chip buscore setup functionFranky Lin
This patch is part of the abstracting chip backplane handle code series. Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09brcm80211: fmac: move bus core prep code to sdio_chip.cFranky Lin
This patch is part of abstracting chip backplane handle code series. Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09brcm80211: fmac: move chip recognition function to sdio_chip.cFranky Lin
Currently backplane handle code is scatterd around dhd_sdio.c which is not good for maintenance and adding new backplane interconnect type support. This patch and the follow up patches are going to abstract all chip backplane control code specific for sdio bus into this new sdio_chip.c Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09brcm80211: fmac: remove unnecessary 4329 chip specific codeFranky Lin
4329 with chiprev 0 can not be found on any product. The code can be removed. Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09cfg80211/mac80211: allow management TX to not wait for ACKJohannes Berg
For probe responses it can be useful to not wait for ACK to avoid retransmissions if the station that sent the probe is already on the next channel, so allow userspace to request not caring about the ACK with a new nl80211 flag. Since mac80211 needs to be updated for the new function prototype anyway implement it right away -- it's just a few lines of code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09mac80211: send unexpected 4addr eventJohannes Berg
Implement the cfg80211 notification but only send one event per associated station to avoid having tons of events if the station thinks it should be allowed to use 4addr frames but it isn't. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09cfg80211: add event for unexpected 4addr framesJohannes Berg
The frames are used by AP/STA WDS mode, and hostapd needs to know when such a frame was received to set up the VLAN appropriately to allow using it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09mac80211: report OBSS beaconsJohannes Berg
If there's an interface in AP mode, OBSS beacons are needed by hostapd/wpa_s to implement logic to enable/disable protection etc. Report the frames and set the capability flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09cfg80211: allow registering to beaconsJohannes Berg
Add the ability to register to received beacon frames to allow implementing OLBC logic in userspace. The registration is per wiphy since there's no point in receiving the same frame multiple times. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09mac80211: support client probeJohannes Berg
Support probing clients with null data frames in AP mode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09nl80211: add API to probe a clientJohannes Berg
When the AP SME in hostapd is used it wants to probe the clients when they have been idle for some time. Add explicit API to support this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09nl80211: advertise device AP SMEJohannes Berg
Add the ability to advertise that the device contains the AP SME and what features it can support. There are currently no features in the bitmap -- probe response offload will be advertised by a few patches Arik is working on now (who took over from Guy Eilam) and a device with AP SME will typically implement and require response offload. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09mac80211: support spurious class3 eventJohannes Berg
Add support for the spurious class3 frame event to mac80211 to enable AP w/o monitor mode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09nl80211: allow subscribing to unexpected class3 framesJohannes Berg
To implement AP mode without monitor interfaces we need to be able to send a deauth to stations that send frames without being associated. Enable this by adding a new nl80211 event for such frames that an application can subscribe to. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09mac80211: add support for control port protocol in AP modeJohannes Berg
This will allow us to support dynamic WEP with 802.1X properly in mac80211 by not encrypting outgoing and accepting unencrypted incoming frames. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09mac80211: add helper to free TX skbJohannes Berg
Drivers that need to drop a frame before it can be transmitted will usually simply free that frame. This is currently fine, but in the future it'll be needed to tell mac80211 about this case, so add a new routine that frees a TX skb. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-17 23:48:16 +0000