| Age | Commit message (Collapse) | Author |
|---|
|
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver correctly rejects all unsupported
parameters, no functional changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Antoine Tenart says:
====================
net: phy: split the mscc driver
This is a proposal to split the MSCC PHY driver, as its code base grew a
lot lately (it's already 3800+ lines). It also supports features
requiring a lot of code (MACsec), which would gain in being split from
the driver core, for readability and maintenance. This is also done as
other features should be coming later, which will also need lots of code
addition.
This series shouldn't change the way the driver works.
I checked, and there were no patch pending on this driver. This change
was done on top of all the modifications done on this driver in net-next.
Since v2:
- Defined inline functions as static inline.
- Fixed a locking issue reported by Kbuild.
Since v1:
- Moved more definitions into the mscc_macsec.h header.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cosmetic commit fixing the MSCC PHY header defines and descriptions,
which were referring the to MSCC Ocelot MAC driver (see
drivers/net/ethernet/mscc/).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch splits the MSCC driver into separate files, per
functionality, to improve readability and maintenance as the codebase
grew a lot. The MACsec code is moved to a dedicated mscc_macsec.c file,
the mscc.c file is renamed to mscc_main.c to keep the driver binary to
be named mscc and common definition are put into a new mscc.h header.
Most of the code was just moved around, except for a few exceptions:
- Header inclusions were reworked to only keep what's needed.
- Three helpers were created in the MACsec code, to avoid #ifdef's in
the main C file: vsc8584_macsec_init, vsc8584_handle_macsec_interrupt
and vsc8584_config_macsec_intr.
The patch should not introduce any functional modification.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MSCC PHY driver is growing, with lots of space consuming features
(firmware support, full initialization, MACsec...). It's becoming hard
to read and navigate in its source code. This patch moves the MSCC
driver to its own directory, without modifying anything, as a
preparation for splitting up its features into dedicated files.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Petr Machata says:
====================
RED: Introduce an ECN tail-dropping mode
When the RED qdisc is currently configured to enable ECN, the RED algorithm
is used to decide whether a certain SKB should be marked. If that SKB is
not ECN-capable, it is early-dropped.
It is also possible to keep all traffic in the queue, and just mark the
ECN-capable subset of it, as appropriate under the RED algorithm. Some
switches support this mode, and some installations make use of it.
There is currently no way to put the RED qdiscs to this mode.
Therefore this patchset adds a new RED flag, TC_RED_TAILDROP. When the
qdisc is configured with this flag, non-ECT traffic is enqueued (and
tail-dropped when the queue size is exhausted) instead of being
early-dropped.
Unfortunately, adding a new RED flag is not as simple as it sounds. RED
flags are passed in tc_red_qopt.flags. However RED neglects to validate the
flag field, and just copies it over wholesale to its internal structure,
and later dumps it back.
A broken userspace can therefore configure a RED qdisc with arbitrary
unsupported flags, and later expect to see the flags on qdisc dump. The
current ABI thus allows storage of 5 bits of custom data along with the
qdisc instance.
GRED, SFQ and CHOKE qdiscs are in the same situation. (GRED validates VQ
flags, but not the flags for the main queue.) E.g. if SFQ ever needs to
support TC_RED_ADAPTATIVE, it needs another way of doing it, and at the
same time it needs to retain the possibility to store 6 bits of
uninterpreted data.
For RED, this problem is resolved in patch #2, which adds a new attribute,
and a way to separate flags from userbits that can be reused by other
qdiscs. The flag itself and related behavioral changes are added in patch
To test the new feature, patch #1 first introduces a TDC testsuite that
covers the existing RED flags. Patch #5 later extends it with taildrop
coverage. Patch #6 contains a forwarding selftest for the offloaded
datapath.
To test the SW datapath, I took the mlxsw selftest and adapted it in mostly
obvious ways. The test is stable enough to verify that RED, ECN and ECN
taildrop actually work. However, I have no confidence in its portability to
other people's machines or mildly different configurations. I therefore do
not find it suitable for upstreaming.
GRED and CHOKE can use the same method as RED if they ever need to support
extra flags. SFQ uses the length of TCA_OPTIONS to dispatch on binary
control structure version, and would therefore need a different approach.
v2:
- Patch #1
- Require nsPlugin in each RED test
- Match end-of-line to catch cases of more flags reported than
requested
- Patch #2:
- Replaced with another patch.
- Patch #3:
- Fix red_use_taildrop() condition in red_enqueue switch for
probabilistic case.
- Patch #5:
- Require nsPlugin in each RED test
- Match end-of-line to catch cases of more flags reported than
requested
- Add a test for creation of non-ECN taildrop, which should fail
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend RED testsuite to cover the new nodrop mode of RED-ECN. This test is
really similar to ECN test, diverging only in the last step, where UDP
traffic should go to backlog instead of being dropped. Thus extract a
common helper, ecn_test_common(), make do_ecn_test() into a relatively
simple wrapper, and add another one, do_ecn_nodrop_test().
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add tests for the new "nodrop" flag.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RED ECN nodrop mode means that non-ECT traffic should not be early-dropped,
but enqueued normally instead. In Spectrum systems, this is achieved by
disabling CWTPM.ew (enable WRED) for a given traffic class.
So far CWTPM.ew was unconditionally enabled. Instead disable it when the
RED qdisc is in nodrop mode.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the RED Qdisc is currently configured to enable ECN, the RED algorithm
is used to decide whether a certain SKB should be marked. If that SKB is
not ECN-capable, it is early-dropped.
It is also possible to keep all traffic in the queue, and just mark the
ECN-capable subset of it, as appropriate under the RED algorithm. Some
switches support this mode, and some installations make use of it.
To that end, add a new RED flag, TC_RED_NODROP. When the Qdisc is
configured with this flag, non-ECT traffic is enqueued instead of being
early-dropped.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The qdiscs RED, GRED, SFQ and CHOKE use different subsets of the same pool
of global RED flags. These are passed in tc_red_qopt.flags. However none of
these qdiscs validate the flag field, and just copy it over wholesale to
internal structures, and later dump it back. (An exception is GRED, which
does validate for VQs -- however not for the main setup.)
A broken userspace can therefore configure a qdisc with arbitrary
unsupported flags, and later expect to see the flags on qdisc dump. The
current ABI therefore allows storage of several bits of custom data to
qdisc instances of the types mentioned above. How many bits, depends on
which flags are meaningful for the qdisc in question. E.g. SFQ recognizes
flags ECN and HARDDROP, and the rest is not interpreted.
If SFQ ever needs to support ADAPTATIVE, it needs another way of doing it,
and at the same time it needs to retain the possibility to store 6 bits of
uninterpreted data. Likewise RED, which adds a new flag later in this
patchset.
To that end, this patch adds a new function, red_get_flags(), to split the
passed flags of RED-like qdiscs to flags and user bits, and
red_validate_flags() to validate the resulting configuration. It further
adds a new attribute, TCA_RED_FLAGS, to pass arbitrary flags.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a handful of tests for creating RED with different flags.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Corresponds to the MAC_SPOOFING_TX privilege in the hardware.
Some firmware versions on some cards don't support the feature, so check
the TX_MAC_SECURITY capability and fail EOPNOTSUPP if trying to enable
spoofchk on a NIC that doesn't support it.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jose Abreu says:
====================
net: phy: XLGMII define and usage in PHYLINK
Adds XLGMII defines and usage in PHYLINK.
Patch 1/2, adds the define for it, whilst 2/2 adds the usage of it in
PHYLINK.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add XLGMII interface and the list of XLGMII speeds to PHYLINK.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a define for XLGMII interface.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a statement that is indented incorrectly, remove a space.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The switches supported so far by the driver only have non-SerDes ports,
so they should be configured in the PHYLINK callback that provides the
resolved PHY link parameters.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add more T5/T6 registers to be collected in register dump:
1. MPS register range 0x9810 to 0x9864 and 0xd000 to 0xd004.
2. NCSI register range 0x1a114 to 0x1a130 and 0x1a138 to 0x1a1c4.
Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2020-03-13
Misc update to mlx5 core and E-Switch driver:
1) Blue-Field, Update VF vports config when num of VFs changed
From Bodon, Various misc cleanups and refactoring
for vport enabling/disabling routines to allow them to be called
dynamically and not only on E-Switch load.
This will allow ECPF (ConnectX BlueField Smartnic) support for dynamic
num vf changes and dynamic vport creation and configuration as introduced
in "Update VF vports config when num of VFs changed" patch.
2) From Parav and Mark, trivial clean-ups.
3) Software steering support for flow table id as destination
and a clean-up patch to remove unnecessary function stubs, from Alex.
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-03-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 86 non-merge commits during the last 12 day(s) which contain
a total of 107 files changed, 5771 insertions(+), 1700 deletions(-).
The main changes are:
1) Add modify_return attach type which allows to attach to a function via
BPF trampoline and is run after the fentry and before the fexit programs
and can pass a return code to the original caller, from KP Singh.
2) Generalize BPF's kallsyms handling and add BPF trampoline and dispatcher
objects to be visible in /proc/kallsyms so they can be annotated in
stack traces, from Jiri Olsa.
3) Extend BPF sockmap to allow for UDP next to existing TCP support in order
in order to enable this for BPF based socket dispatch, from Lorenz Bauer.
4) Introduce a new bpftool 'prog profile' command which attaches to existing
BPF programs via fentry and fexit hooks and reads out hardware counters
during that period, from Song Liu. Example usage:
bpftool prog profile id 337 duration 3 cycles instructions llc_misses
4228 run_cnt
3403698 cycles (84.08%)
3525294 instructions # 1.04 insn per cycle (84.05%)
13 llc_misses # 3.69 LLC misses per million isns (83.50%)
5) Batch of improvements to libbpf, bpftool and BPF selftests. Also addition
of a new bpf_link abstraction to keep in particular BPF tracing programs
attached even when the applicaion owning them exits, from Andrii Nakryiko.
6) New bpf_get_current_pid_tgid() helper for tracing to perform PID filtering
and which returns the PID as seen by the init namespace, from Carlos Neira.
7) Refactor of RISC-V JIT code to move out common pieces and addition of a
new RV32G BPF JIT compiler, from Luke Nelson.
8) Add gso_size context member to __sk_buff in order to be able to know whether
a given skb is GSO or not, from Willem de Bruijn.
9) Add a new bpf_xdp_output() helper which reuses XDP's existing perf RB output
implementation but can be called from tracepoint programs, from Eelco Chaudron.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove dummy functions declaration, the dummy functions are not needed
since fs_dr is the only one to call mlx5dr and both fs_dr and dr files
depend on the same config flag (MLX5_SW_STEERING).
Fixes: 70605ea545e8 ("net/mlx5: DR, Expose APIs for direct rule managing")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
This action allows to go to a flow table based on the table id.
Goto flow table id is required for supporting user space SW.
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
All callers needs to work on mlx5_core_dev and it is already derived
before calling mlx5_devlink_eswitch_check().
Hence, accept mlx5_core_dev in mlx5_devlink_eswitch_check().
Given that it works on mlx5_core_dev change helper function name to
drop devlink prefix.
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Invoke mutex_destroy() to catch any esw state_lock errors.
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Annotate mutex destroy to keep it symmetric to init sequence.
It should be destroyed after its users (representor netdevices) are
destroyed in below flow.
esw_offloads_disable()
esw_offloads_unload_rep()
Hence, initialize the mutex before creating the representors which uses
it.
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Allow passing NULL spec when creating a flow rule. Such rules will act
as "catch all" flow rules.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Following introduction of per vport configuration of vport and rep,
unload all reps per rep type is still needed as IB reps can be
unloaded individually. However, a few internal functions exist purely
for this purpose, merge them to a single function.
This patch doesn't change any existing functionality.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Currently, ECPF eswitch manager does one-time only configuration for
VF vports when device switches to offloads mode. However, when num of
VFs changed from host side, driver doesn't update VF vports
configurations.
Hence, perform VFs vport configuration update whenever num_vfs change
event occurs.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Both legacy and offload modes require vport setup, only offload mode
requires rep setup. Before this patch, vport and rep operations are
separated applied to all relevant vports in different stages.
Change to use per vport configuration, so that vport and rep operations
are modularized per vport.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Vport enable and disable sequence is incorrect. It should be:
enable()
esw_vport_setup_acl,
esw_vport_setup,
esw_vport_enable_qos.
disable()
esw_vport_disable_qos,
esw_vport_cleanup,
esw_vport_cleanup_acl.
Instead of having two setup functions for port and acl, merge
acl setup to port setup function.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Rename esw_apply_vport_config() to esw_vport_setup(), and add new
helper function esw_vport_cleanup() to make them symmetric.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
esw_vport_enable_qos can return error in cases below:
1. QoS is already enabled. Warnning is useless in this case.
2. Create scheduling element cmd failed. There is already a warning.
Remove the redundant warnning if esw_vport_enable_qos returns err.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Consider scenario below, CPU 1 is at risk to query already destroyed
drop counters. Need to apply the same state mutex when disabling vport.
+-------------------------------+-------------------------------------+
| CPU 0 | CPU 1 |
+-------------------------------+-------------------------------------+
| mlx5_device_disable_sriov | mlx5e_get_vf_stats |
| mlx5_eswitch_disable | mlx5_eswitch_get_vport_stats |
| esw_disable_vport | mlx5_eswitch_query_vport_drop_stats |
| mlx5_fc_destroy(drop_counter) | mlx5_fc_query(drop_counter) |
+-------------------------------+-------------------------------------+
Fixes: b8a0dbe3a90b ("net/mlx5e: E-switch, Add steering drop counters")
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
esw_vport_create_legacy_acl_tables bails out immediately for eswitch
manager, hence remove all the check of esw manager cap after.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Andrii Nakryiko says:
====================
This patch set fixes bug in CO-RE relocation candidate finding logic, which
currently allows matching against forward declarations, functions, and other
named types, even though it makes no sense to even attempt. As part of
verifying the fix, add test using vmlinux.h with preserve_access_index
attribute and utilizing struct pt_regs heavily to trace nanosleep syscall
using 5 different types of tracing BPF programs.
This test also demonstrated problems using struct pt_regs in syscall
tracepoints and required a new set of macro, which were added in patch #3
into bpf_tracing.h.
Patch #1 fixes annoying issue with selftest failure messages being out of
sync.
v1->v2:
- drop unused handle__probed() function (Martin).
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add vmlinux.h generation to selftest/bpf's Makefile. Use it from newly added
test_vmlinux to trace nanosleep syscall using 5 different types of programs:
- tracepoint;
- raw tracepoint;
- raw tracepoint w/ direct memory reads (tp_btf);
- kprobe;
- fentry.
These programs are realistic variants of real-life tracing programs,
excercising vmlinux.h's usage with tracing applications.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200313172336.1879637-5-andriin@fb.com
|
|
Syscall raw tracepoints have struct pt_regs pointer as tracepoint's first
argument. After that, reading any of pt_regs fields requires bpf_probe_read(),
even for tp_btf programs. Due to that, PT_REGS_PARMx macros are not usable as
is. This patch adds CO-RE variants of those macros that use BPF_CORE_READ() to
read necessary fields. This provides relocatable architecture-agnostic pt_regs
field accesses.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200313172336.1879637-4-andriin@fb.com
|
|
When finding target type candidates, ignore forward declarations, functions,
and other named types of incompatible kind. Not doing this can cause false
errors. See [0] for one such case (due to struct pt_regs forward
declaration).
[0] https://github.com/iovisor/bcc/pull/2806#issuecomment-598543645
Fixes: ddc7c3042614 ("libbpf: implement BPF CO-RE offset relocation algorithm")
Reported-by: Wenbo Zhang <ethercflow@gmail.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200313172336.1879637-3-andriin@fb.com
|
|
printf() doesn't seem to honor using overwritten stdout/stderr (as part of
stdio hijacking), so ensure all "standard" invocations of printf() do
fprintf(stdout, ...) instead.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200313172336.1879637-2-andriin@fb.com
|
|
Andrii Nakryiko reports that sockmap_listen test suite is frequently
failing due to accept() calls erroring out with EAGAIN:
./test_progs:connect_accept_thread:733: accept: Resource temporarily unavailable
connect_accept_thread:FAIL:733
This is because we are using a non-blocking listening TCP socket to
accept() connections without polling on the socket.
While at first switching to blocking mode seems like the right thing to do,
this could lead to test process blocking indefinitely in face of a network
issue, like loopback interface being down, as Andrii pointed out.
Hence, stick to non-blocking mode for TCP listening sockets but with
polling for incoming connection for a limited time before giving up.
Apply this approach to all socket I/O calls in the test suite that we
expect to block indefinitely, that is accept() for TCP and recv() for UDP.
Fixes: 44d28be2b8d4 ("selftests/bpf: Tests for sockmap/sockhash holding listening sockets")
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200313161049.677700-1-jakub@cloudflare.com
|
|
Commit fe4eb069edb7 ("bpftool: Use linux/types.h from source tree for
profiler build") added a build dependency on tools/testing/selftests/bpf
to tools/bpf/bpftool. This is suboptimal with respect to a possible
stand-alone build of bpftool.
Fix this by moving tools/testing/selftests/bpf/include/uapi/linux/types.h
to tools/include/uapi/linux/types.h.
This requires an adjustment in the include search path order for the
tests in tools/testing/selftests/bpf so that tools/include/linux/types.h
is selected when building host binaries and
tools/include/uapi/linux/types.h is selected when building bpf binaries.
Verified by compiling bpftool and the bpf selftests on x86_64 with this
change.
Fixes: fe4eb069edb7 ("bpftool: Use linux/types.h from source tree for profiler build")
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200313113105.6918-1-tklauser@distanz.ch
|
|
Sparse reports a warning at __bpf_prog_enter() and __bpf_prog_exit()
warning: context imbalance in __bpf_prog_enter() - wrong count at exit
warning: context imbalance in __bpf_prog_exit() - unexpected unlock
The root cause is the missing annotation at __bpf_prog_enter()
and __bpf_prog_exit()
Add the missing __acquires(RCU) annotation
Add the missing __releases(RCU) annotation
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200311010908.42366-2-jbi.octave@gmail.com
|
|
When compiling bpftool the following warning is found: "declaration of
'struct bpf_pidns_info' will not be visible outside of this function."
This patch adds struct bpf_pidns_info to type_fwds array to fix this.
Fixes: b4490c5c4e02 ("bpf: Added new helper bpf_get_ns_current_pid_tgid")
Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200313154650.13366-1-cneirabustos@gmail.com
|
|
nanosleep syscall expects pointer to struct timespec, not nanoseconds
directly. Current implementation fulfills its purpose of invoking nanosleep
syscall, but doesn't really provide sleeping capabilities, which can cause
flakiness for tests relying on usleep() to wait for something.
Fixes: ec12a57b822c ("selftests/bpf: Guarantee that useep() calls nanosleep() syscall")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200313061837.3685572-1-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
