summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-10-02Input: zforce - simplify function return logicJavier Martinez Canillas
The invoked function already returns zero on success or a negative errno code so there is no need to open code the logic in the caller. This also fixes the following make coccicheck warning: end returns can be simplified and declaration on line 602 can be dropped Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Heiko Stuebner <heiko.stuebner@bq.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-02Input: kxtj9 - remove unneeded retval variableJavier Martinez Canillas
The retval variable isn't needed since isn't used in the function. Remove the variable and just return 0 instead. This also fixes the following make coccicheck warning: drivers/input/misc/kxtj9.c:638:5-11: Unneeded variable: "retval". Return "0" on line 646 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-02Input: joydev - use memdup_user() to duplicate memory from user-spaceJavier Martinez Canillas
The memdup_user() helper function can be used to duplicate a memory region from user-space to kernel-space. There is no need to open code the same logic using kmalloc() and copy_from_user() instead. This was found with make coccicheck that reported the following warning: drivers/input/joydev.c:447:10-17: WARNING opportunity for memdup_user drivers/input/joydev.c:483:10-17: WARNING opportunity for memdup_user Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-02Input: goldfish - allow compile the driver with COMPILE_TESTJavier Martinez Canillas
The driver depends on GOLDFISH but there isn't a build dependency so it's a good idea to allow the driver to be built even if that option is disabled, if the COMPILE_TEST option is enabled. That way, the driver can be built with a config generated by make allyesconfig and can be checked if a patch would break the build. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-02Input: gpio_keys - don't report events on gpio failureBjorn Andersson
In the cases where the gpio chip fails to acquire the current state an error is reported back to gpio_keys. This is currently interpreted as if the line went high, which just confuses the developer. This patch introduces an error print in this case and skipps the reporting of a input event; to aid in debugging this issue. Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-29Input: add DA9062 OnKey capability to DA9063 OnKey driverS Twiss
Add DA9062 OnKey support into the existing DA9063 OnKey driver component by using generic access tables for common register and bit mask definitions. The following change will add generic register and bit mask support to the DA9063 OnKey. The following alterations have been made to the DA9063 OnKey: - Addition of a da906x_chip_config structure to hold all generic registers and bitmasks for this type of OnKey component. - Addition of an struct of_device_id table for DA9063 and DA9062 defaults - Refactoring functions to use struct da9063_onkey accesses to generic registers/masks instead of using defines from registers.h - Re-work of da9063_onkey_probe() to use of_match_node() and dev_get_regmap() to provide initialisation of generic registers and masks and access to regmap Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-29Merge tag 'v4.3-rc3' into nextDmitry Torokhov
Merge with Linux 4.3-rc3 to bring in MFD DA9062 changes to merge DA9062 OnKey driver.
2015-09-29Input: walkera0701 - use parallel port device modelSudip Mukherjee
Modify walkera0701 driver to use the new Parallel Port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-29Input: turbografx - use parallel port device modelSudip Mukherjee
Modify turbografx driver to use the new Parallel Port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-29Input: gamecon - use parallel port device modelSudip Mukherjee
Modify gamecon driver to use the new Parallel Port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-29Input: ff-core - silence an underflow warningDan Carpenter
My static checker complains that "value" comes from the user in evdev_do_ioctl() and we check that it's not too large here but we don't check that it's negative. It's harmless because the ->set_gain() and ->set_autocenter() functions truncate it to a valid u16 value, but we may as well fix it just to make the static checker happy. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-28Input: omap4-keypad - fix memory leakSudip Mukherjee
If omap4_keypad_parse_dt() fails we returned the error code but we missed releasing keypad_data. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-28Input: db9 - use parallel port device modelSudip Mukherjee
Modify db9 driver to use the new Parallel Port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Tested-By: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-27ARM: dts: set up trigger type for edt-ft5x06 interruptsDmitry Torokhov
Now that the driver respects IRQ trigger settings from device tree, let's fix them up in individual DTSes (note that the driver is still compatible with older DTSes). Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-27Input: edt-ft5x06 - do not hardcode interrupt trigger typeDmitry Torokhov
Instead of hardcoding IRQ trigger type to IRQF_TRIGGER_FALLING, let's respect settings specified in device tree. To be compatible with older DTSes, if trigger type is not set up in DTS we'll set it to default (falling edge). Tested-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-27Input: edt-ft5x06 - use generic properties APIDmitry Torokhov
Instead of only parsing device tree properties let's switch to using generic properties API so that the driver can also work on other platforms. Tested-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-27Input: edt-ft5x06 - remove support for platform dataDmitry Torokhov
We do not have any users of platform data in the tree and all newer platforms are either DT or ACPI, so let's drop handling of platform data. Tested-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-27Input: edt-ft5x06 - drop parsing of irq gpioDmitry Torokhov
The driver does not use irq gpio as gpio, but rather relies on I2C core or board code to set up client's structure IRQ line, so let's stop trying to locate the resource and parse it. Tested-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-27Input: edt-ft5x06 - switch to newer gpio frameworkFranklin S Cooper Jr
The current/old gpio framework used doesn't properly listen to ACTIVE_LOW and ACTIVE_HIGH flags. The newer gpio framework takes into account these flags when setting gpio values. Since the values being output were based on voltage and not logic they change to reflect this difference. Also use gpiod_set_value_cansleep since wake and reset pins can be provided by bus based io expanders. Switch from msleep(5) to udelay_range(5000,6000) to avoid check patch warning. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-27Linux 4.3-rc3Linus Torvalds
2015-09-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Two bugfixes from Andy addressing at least some of the subtle NMI related wreckage which has been reported by Sasha Levin" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/nmi/64: Fix a paravirt stack-clobbering bug in the NMI code x86/paravirt: Replace the paravirt nop with a bona fide empty function
2015-09-27Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomass Gleixner: "A bugfix for the atmel aic5 irq chip driver which caches the wrong data and thereby breaking resume" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/atmel-aic5: Use per chip mask caches in mask/unmask()
2015-09-27Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Just two fixes: wire up the new system calls added during the last merge window, and fix another user access site" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: alignment: fix alignment handling for uaccess changes ARM: wire up new syscalls
2015-09-27Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Our first real batch of fixes this release cycle. Nothing really concerning, and diffstat is a bit inflated due to some DT contents moving around on STi platforms. There's a collection of them here: - A fixup for a build breakage that hits on arm64 allmodconfig in QCOM SCM firmware drivers - MMC fixes for OMAP that had quite a bit of breakage this merge window. - Misc build/warning fixes on PXA and OMAP - A couple of minor fixes for Beagleboard X15 which is now starting to see a few more users in the wild" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: sti: dt: adapt DT to fix probe/bind issues in DRM driver ARM: dts: fix omap2+ address translation for pbias firmware: qcom: scm: Add function stubs for ARM64 ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 ARM: omap2plus_defconfig: enable GPIO_PCA953X ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late ARM: dts: am57xx-beagle-x15: Update Phy supplies ARM: pxa: balloon3: Fix build error ARM: dts: Fixup model name for HP t410 dts ARM: dts: DRA7: fix a typo in ethernet ARM: omap2plus_defconfig: make PCF857x built-in ARM: dts: Use ti,pbias compatible string for pbias ARM: OMAP5: Cleanup options for SoC only build ARM: DRA7: Select missing options for SoC only build ARM: OMAP2+: board-generic: Remove stale of_irq macros ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well ARM: dts: omap3-igep: Move eth IRQ pinmux to IGEPv2 common dtsi ARM: dts: am57xx-beagle-x15: Add wakeup irq for mcp79410 ARM: dts: am335x-phycore-som: Fix mpu voltage ...
2015-09-27Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull CIFS fixes from Steve French: "Four fixes from testing at the recent SMB3 Plugfest including two important authentication ones (one fixes authentication problems to some popular servers when clock times differ more than two hours between systems, the other fixes Kerberos authentication for SMB3)" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: fix encryption error checks on mount [SMB3] Fix sec=krb5 on smb3 mounts cifs: use server timestamp for ntlmv2 authentication disabling oplocks/leases via module parm enable_oplocks broken for SMB3
2015-09-26Merge tag 'pxa-fixes-v4.3' of https://github.com/rjarzmik/linux into fixesOlof Johansson
ARM: pxa: fixes for v4.3 These fixes are mainly regression fixes triggered by irq changes, common clock framework introduction and sound side-effect of other platforms. * tag 'pxa-fixes-v4.3' of https://github.com/rjarzmik/linux: ARM: pxa: balloon3: Fix build error ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding ARM: pxa: fix DFI bus lockups on startup Signed-off-by: Olof Johansson <olof@lixom.net>
2015-09-26Merge tag 'omap-for-v4.3/fixes-rc2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.3-rc cycle: - Two more patches to fix most of the MMC regressions with the PBIAS regulator changes. At least two MMC driver related issues still seems to remain for omap3 legacy booting and omap4 duovero. Note that the dts changes depend on a recent regulator fix, and are based on the regulator commit now in mainline kernel - Enable autoidle for am43xx clocks to prevent clocks from staying always on - Fix i2c5 pinctrl offsets for omap5-uevm - Enable PCA953X as that's needed for HDMI to work on omap5 - Update phy supplies for beagle x15 beta board - Use palmas-usb for on beagle x15 to start using the related driver that recently got merged * tag 'omap-for-v4.3/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: fix omap2+ address translation for pbias ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 ARM: omap2plus_defconfig: enable GPIO_PCA953X ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late ARM: dts: am57xx-beagle-x15: Update Phy supplies regulator: pbias: program pbias register offset in pbias driver ARM: omap2plus_defconfig: Enable MUSB DMA support ARM: DRA752: Add ID detect for ES2.0 ARM: OMAP3: vc: fix 'or' always true warning ARM: OMAP2+: Fix booting if no timer parent clock is available ARM: OMAP2+: omap-device: fix race deferred probe of omap_hsmmc vs omap_device_late_init Signed-off-by: Olof Johansson <olof@lixom.net>
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - check the return value of platform_get_irq as signed int in xgene. - skip adf_dev_restore on virtual functions in qat. - fix double-free with backlogged requests in marvell_cesa" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: hwrng: xgene - fix handling platform_get_irq crypto: qat - VF should never trigger SBR on PH crypto: marvell - properly handle CRYPTO_TFM_REQ_MAY_BACKLOG-flagged requests
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "This includes a iser-target series from Jenny + Sagi @ Mellanox that addresses the few remaining active I/O shutdown bugs, along with a patch to support zero-copy for immediate data payloads that gives a nice performance improvement for small block WRITEs. Also included are some recent >= v4.2 regression bug-fixes. The most notable is a RCU conversion regression for SPC-3 PR registrations, and recent removal of obsolete RFC-3720 markers that introduced a login regression bug with MSFT iSCSI initiators. Thanks to everyone who has been testing + reporting bugs for v4.x" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: Avoid OFMarker + IFMarker negotiation target: Make TCM_WRITE_PROTECT failure honor D_SENSE bit target: Fix target_sense_desc_format NULL pointer dereference target: Propigate backend read-only to core_tpg_add_lun target: Fix PR registration + APTPL RCU conversion regression iser-target: Skip data copy if all the command data comes as immediate iser-target: Change the recv buffers posting logic iser-target: Fix pending connections handling in target stack shutdown sequnce iser-target: Remove np_ prefix from isert_np members iser-target: Remove unused variables iser-target: Put the reference on commands waiting for unsol data iser-target: remove command with state ISTATE_REMOVE
2015-09-26Merge tag 'usb-4.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB driver fixes for 4.3-rc3. There's the usual assortment of new device ids, combined with xhci and gadget driver fixes. Full details in the shortlog. All of these have been in linux-next with no reported problems" * tag 'usb-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (34 commits) MAINTAINERS: remove amd5536udc USB gadget driver maintainer USB: whiteheat: fix potential null-deref at probe xhci: init command timeout timer earlier to avoid deleting it uninitialized xhci: change xhci 1.0 only restrictions to support xhci 1.1 usb: xhci: exit early in xhci_setup_device() if we're halted or dying usb: xhci: stop everything on the first call to xhci_stop usb: xhci: Clear XHCI_STATE_DYING on start usb: xhci: lock mutex on xhci_stop xhci: Move xhci_pme_quirk() behind #ifdef CONFIG_PM xhci: give command abortion one more chance before killing xhci usb: Use the USB_SS_MULT() macro to get the burst multiplier. usb: dwc3: gadget: Fix BUG in RT config usb: musb: fix cppi channel teardown for isoch transfer usb: phy: isp1301: Export I2C module alias information usb: gadget: drop null test before destroy functions usb: gadget: dummy_hcd: in transfer(), return data sent, not limit usb: gadget: dummy_hcd: fix rescan logic for transfer usb: gadget: dummy_hcd: fix unneeded else-if condition usb: gadget: dummy_hcd: emulate sending zlp in packet logic usb: musb: dsps: fix polling in device-only mode ...
2015-09-26Merge tag 'tty-4.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fix from Greg KH: "Here is one serial driver fix for 4.3-rc3 that resolves a module loading issue due to splitting up of the 8250 driver into smaller pieces. It's been in linux-next with no reported problems" * tag 'tty-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: Add missing module license for 8250_base.ko
2015-09-26Merge tag 'staging-4.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some tiny staging driver and documentation fixes for 4.3-rc3. All of these resolve reported issues that people have found and have been in the linux-next tree for a while with no problems" * tag 'staging-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: MAINTAINERS: Update email address for Martyn Welch staging: ion: fix corruption of ion_import_dma_buf staging: dgap: Remove myself from the MAINTAINERS file staging: most: Add dependency to HAS_IOMEM staging: unisys: remove reference of visorutil staging: unisys: visornic: handle error return from device registration staging: unisys: stop device registration before visorbus registration staging: unisys: visorbus: Unregister driver on error staging: unisys: visornic: Fix receive bytes statistics staging: unisys: unregister netdev when create debugfs fails staging: fbtft: replace master->setup() with spi_setup() staging: fbtft: fix 9-bit SPI support detection staging/lustre: change Lustre URLs and mailing list staging/android: Update ION TODO per LPC discussion Staging: most: MOST and MOSTCORE should depend on HAS_DMA staging: most: fix HDM_USB dependencies and build errors
2015-09-26Merge tag 'driver-core-4.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is one driver core fix for 4.3-rc3 that resolves a reported oops" * tag 'driver-core-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: cpu/cacheinfo: Fix teardown path
2015-09-26Merge tag 'char-misc-4.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here's some tiny char and misc driver fixes that resolve some reported errors for 4.3-rc3. All of these have been in linux-next with no problems for a while" * tag 'char-misc-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: extcon: Fix attached value returned by is_extcon_changed Drivers: hv: vmbus: fix init_vp_index() for reloading hv_netvsc mei: fix debugfs files leak on error path thunderbolt: Allow loading of module on recent Apple MacBooks with thunderbolt 2 controller
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) When we run a tap on netlink sockets, we have to copy mmap'd SKBs instead of cloning them. From Daniel Borkmann. 2) When converting classical BPF into eBPF, fix the setting of the source reg to BPF_REG_X. From Tycho Andersen. 3) Fix igmpv3/mldv2 report parsing in the bridge multicast code, from Linus Lussing. 4) Fix dst refcounting for ipv6 tunnels, from Martin KaFai Lau. 5) Set NLM_F_REPLACE flag properly when replacing ipv6 routes, from Roopa Prabhu. 6) Add some new cxgb4 PCI device IDs, from Hariprasad Shenai. 7) Fix headroom tests and SKB leaks in ipv6 fragmentation code, from Florian Westphal. 8) Check DMA mapping errors in bna driver, from Ivan Vecera. 9) Several 8139cp bug fixes (dev_kfree_skb_any in interrupt context, misclearing of interrupt status in TX timeout handler, etc.) from David Woodhouse. 10) In tipc, reset SKB header pointer after skb_linearize(), from Erik Hugne. 11) Fix autobind races et al. in netlink code, from Herbert Xu with help from Tejun Heo and others. 12) Missing SET_NETDEV_DEV in sunvnet driver, from Sowmini Varadhan. 13) Fix various races in timewait timer and reqsk_queue_hadh_req, from Eric Dumazet. 14) Fix array overruns in mac80211, from Johannes Berg and Dan Carpenter. 15) Fix data race in rhashtable_rehash_one(), from Dmitriy Vyukov. 16) Fix race between poll_one_napi and napi_disable, from Neil Horman. 17) Fix byte order in geneve tunnel port config, from John W Linville. 18) Fix handling of ARP replies over lightweight tunnels, from Jiri Benc. 19) We can loop when fib rule dumps cross multiple SKBs, fix from Wilson Kok and Roopa Prabhu. 20) Several reference count handling bug fixes in the PHY/MDIO layer from Russel King. 21) Fix lockdep splat in ppp_dev_uninit(), from Guillaume Nault. 22) Fix crash in icmp_route_lookup(), from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net: Fix panic in icmp_route_lookup net: update docbook comment for __mdiobus_register() ppp: fix lockdep splat in ppp_dev_uninit() net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selected phy: marvell: add link partner advertised modes net: fix net_device refcounting phy: add phy_device_remove() phy: fixed-phy: properly validate phy in fixed_phy_update_state() net: fix phy refcounting in a bunch of drivers of_mdio: fix MDIO phy device refcounting phy: add proper phy struct device refcounting phy: fix mdiobus module safety net: dsa: fix of_mdio_find_bus() device refcount leak phy: fix of_mdio_find_bus() device refcount leak ip6_tunnel: Reduce log level in ip6_tnl_err() to debug ip6_gre: Reduce log level in ip6gre_err() to debug fib_rules: fix fib rule dumps across multiple skbs bnx2x: byte swap rss_key to comply to Toeplitz specs net: revert "net_sched: move tp->root allocation into fw_init()" lwtunnel: remove source and destination UDP port config option ...
2015-09-25net: Fix panic in icmp_route_lookupDavid Ahern
Andrey reported a panic: [ 7249.865507] BUG: unable to handle kernel pointer dereference at 000000b4 [ 7249.865559] IP: [<c16afeca>] icmp_route_lookup+0xaa/0x320 [ 7249.865598] *pdpt = 0000000030f7f001 *pde = 0000000000000000 [ 7249.865637] Oops: 0000 [#1] ... [ 7249.866811] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.3.0-999-generic #201509220155 [ 7249.866876] Hardware name: MSI MS-7250/MS-7250, BIOS 080014 08/02/2006 [ 7249.866916] task: c1a5ab00 ti: c1a52000 task.ti: c1a52000 [ 7249.866949] EIP: 0060:[<c16afeca>] EFLAGS: 00210246 CPU: 0 [ 7249.866981] EIP is at icmp_route_lookup+0xaa/0x320 [ 7249.867012] EAX: 00000000 EBX: f483ba48 ECX: 00000000 EDX: f2e18a00 [ 7249.867045] ESI: 000000c0 EDI: f483ba70 EBP: f483b9ec ESP: f483b974 [ 7249.867077] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 7249.867108] CR0: 8005003b CR2: 000000b4 CR3: 36ee07c0 CR4: 000006f0 [ 7249.867141] Stack: [ 7249.867165] 320310ee 00000000 00000042 320310ee 00000000 c1aeca00 f3920240 f0c69180 [ 7249.867268] f483ba04 f855058b a89b66cd f483ba44 f8962f4b 00000000 e659266c f483ba54 [ 7249.867361] 8004753c f483ba5c f8962f4b f2031140 000003c1 ffbd8fa0 c16b0e00 00000064 [ 7249.867448] Call Trace: [ 7249.867494] [<f855058b>] ? e1000_xmit_frame+0x87b/0xdc0 [e1000e] [ 7249.867534] [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack] [ 7249.867576] [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack] [ 7249.867615] [<c16b0e00>] ? icmp_send+0xa0/0x380 [ 7249.867648] [<c16b102f>] icmp_send+0x2cf/0x380 [ 7249.867681] [<f89c8126>] nf_send_unreach+0xa6/0xc0 [nf_reject_ipv4] [ 7249.867714] [<f89cd0da>] reject_tg+0x7a/0x9f [ipt_REJECT] [ 7249.867746] [<f88c29a7>] ipt_do_table+0x317/0x70c [ip_tables] [ 7249.867780] [<f895e0a6>] ? __nf_conntrack_find_get+0x166/0x3b0 [nf_conntrack] [ 7249.867838] [<f895eea8>] ? nf_conntrack_in+0x398/0x600 [nf_conntrack] [ 7249.867889] [<f84c0035>] iptable_filter_hook+0x35/0x80 [iptable_filter] [ 7249.867933] [<c16776a1>] nf_iterate+0x71/0x80 [ 7249.867970] [<c1677715>] nf_hook_slow+0x65/0xc0 [ 7249.868002] [<c1681811>] __ip_local_out_sk+0xc1/0xd0 [ 7249.868034] [<c1680f30>] ? ip_forward_options+0x1a0/0x1a0 [ 7249.868066] [<c1681836>] ip_local_out_sk+0x16/0x30 [ 7249.868097] [<c1684054>] ip_send_skb+0x14/0x80 [ 7249.868129] [<c16840f4>] ip_push_pending_frames+0x34/0x40 [ 7249.868163] [<c16844a2>] ip_send_unicast_reply+0x282/0x310 [ 7249.868196] [<c16a0863>] tcp_v4_send_reset+0x1b3/0x380 [ 7249.868227] [<c16a1b63>] tcp_v4_rcv+0x323/0x990 [ 7249.868257] [<c16776a1>] ? nf_iterate+0x71/0x80 [ 7249.868289] [<c167dc2b>] ip_local_deliver_finish+0x8b/0x230 [ 7249.868322] [<c167df4c>] ip_local_deliver+0x4c/0xa0 [ 7249.868353] [<c167dba0>] ? ip_rcv_finish+0x390/0x390 [ 7249.868384] [<c167d88c>] ip_rcv_finish+0x7c/0x390 [ 7249.868415] [<c167e280>] ip_rcv+0x2e0/0x420 ... Prior to the VRF change the oif was not set in the flow struct, so the VRF support should really have only added the vrf_master_ifindex lookup. Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX") Cc: Andrey Melnikov <temnota.am@gmail.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25net: update docbook comment for __mdiobus_register()Russell King
Update the docbook comment for __mdiobus_register() to include the new module owner argument. This resolves a warning found by the 0-day builder. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25MAINTAINERS: remove amd5536udc USB gadget driver maintainerGreg Kroah-Hartman
Thomas can no longer work on the driver, so he asked me to mark the MAINTAINER entry as "Orphan" with the hope that someone else would someday pick it up. Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-25Merge branch 'for-4.3-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull another cgroup fix from Tejun Heo: "The cgroup writeback support got inadvertently enabled for traditional hierarchies revealing two regressions which are currently being worked on. It shouldn't have been enabled on traditional hierarchies, so disable it on them. This is enough to make the regressions go away for people who aren't experimenting with cgroup" * 'for-4.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup, writeback: don't enable cgroup writeback on traditional hierarchies
2015-09-25ppp: fix lockdep splat in ppp_dev_uninit()Guillaume Nault
ppp_dev_uninit() locks all_ppp_mutex while under rtnl mutex protection. ppp_create_interface() must then lock these mutexes in that same order to avoid possible deadlock. [ 120.880011] ====================================================== [ 120.880011] [ INFO: possible circular locking dependency detected ] [ 120.880011] 4.2.0 #1 Not tainted [ 120.880011] ------------------------------------------------------- [ 120.880011] ppp-apitest/15827 is trying to acquire lock: [ 120.880011] (&pn->all_ppp_mutex){+.+.+.}, at: [<ffffffffa0145f56>] ppp_dev_uninit+0x64/0xb0 [ppp_generic] [ 120.880011] [ 120.880011] but task is already holding lock: [ 120.880011] (rtnl_mutex){+.+.+.}, at: [<ffffffff812e4255>] rtnl_lock+0x12/0x14 [ 120.880011] [ 120.880011] which lock already depends on the new lock. [ 120.880011] [ 120.880011] [ 120.880011] the existing dependency chain (in reverse order) is: [ 120.880011] [ 120.880011] -> #1 (rtnl_mutex){+.+.+.}: [ 120.880011] [<ffffffff81073a6f>] lock_acquire+0xcf/0x10e [ 120.880011] [<ffffffff813ab18a>] mutex_lock_nested+0x56/0x341 [ 120.880011] [<ffffffff812e4255>] rtnl_lock+0x12/0x14 [ 120.880011] [<ffffffff812d9d94>] register_netdev+0x11/0x27 [ 120.880011] [<ffffffffa0147b17>] ppp_ioctl+0x289/0xc98 [ppp_generic] [ 120.880011] [<ffffffff8113b367>] do_vfs_ioctl+0x4ea/0x532 [ 120.880011] [<ffffffff8113b3fd>] SyS_ioctl+0x4e/0x7d [ 120.880011] [<ffffffff813ad7d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [ 120.880011] [ 120.880011] -> #0 (&pn->all_ppp_mutex){+.+.+.}: [ 120.880011] [<ffffffff8107334e>] __lock_acquire+0xb07/0xe76 [ 120.880011] [<ffffffff81073a6f>] lock_acquire+0xcf/0x10e [ 120.880011] [<ffffffff813ab18a>] mutex_lock_nested+0x56/0x341 [ 120.880011] [<ffffffffa0145f56>] ppp_dev_uninit+0x64/0xb0 [ppp_generic] [ 120.880011] [<ffffffff812d5263>] rollback_registered_many+0x19e/0x252 [ 120.880011] [<ffffffff812d5381>] rollback_registered+0x29/0x38 [ 120.880011] [<ffffffff812d53fa>] unregister_netdevice_queue+0x6a/0x77 [ 120.880011] [<ffffffffa0146a94>] ppp_release+0x42/0x79 [ppp_generic] [ 120.880011] [<ffffffff8112d9f6>] __fput+0xec/0x192 [ 120.880011] [<ffffffff8112dacc>] ____fput+0x9/0xb [ 120.880011] [<ffffffff8105447a>] task_work_run+0x66/0x80 [ 120.880011] [<ffffffff81001801>] prepare_exit_to_usermode+0x8c/0xa7 [ 120.880011] [<ffffffff81001900>] syscall_return_slowpath+0xe4/0x104 [ 120.880011] [<ffffffff813ad931>] int_ret_from_sys_call+0x25/0x9f [ 120.880011] [ 120.880011] other info that might help us debug this: [ 120.880011] [ 120.880011] Possible unsafe locking scenario: [ 120.880011] [ 120.880011] CPU0 CPU1 [ 120.880011] ---- ---- [ 120.880011] lock(rtnl_mutex); [ 120.880011] lock(&pn->all_ppp_mutex); [ 120.880011] lock(rtnl_mutex); [ 120.880011] lock(&pn->all_ppp_mutex); [ 120.880011] [ 120.880011] *** DEADLOCK *** Fixes: 8cb775bc0a34 ("ppp: fix device unregistration upon netns deletion") Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selectedSudip Mukherjee
The builds of allmodconfig of avr32 is failing with: drivers/net/ethernet/via/via-rhine.c:1098:2: error: implicit declaration of function 'pci_iomap' [-Werror=implicit-function-declaration] drivers/net/ethernet/via/via-rhine.c:1119:2: error: implicit declaration of function 'pci_iounmap' [-Werror=implicit-function-declaration] The generic empty pci_iomap and pci_iounmap is used only if CONFIG_PCI is not defined and CONFIG_GENERIC_PCI_IOMAP is defined. Add GENERIC_PCI_IOMAP in the dependency list for VIA_RHINE as we are getting build failure when CONFIG_PCI and CONFIG_GENERIC_PCI_IOMAP both are not defined. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25phy: marvell: add link partner advertised modesRussell King
Read the standard link partner advertisment registers and store it in phydev->lp_advertising, so ethtool can report this information to userspace via ethtool. Zero it as per genphy if autonegotiation is disabled. Tested with a Marvell 88E1512 PHY. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25Merge branch 'for-linus-4.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "This is an assorted set I've been queuing up: Jeff Mahoney tracked down a tricky one where we ended up starting IO on the wrong mapping for special files in btrfs_evict_inode. A few people reported this one on the list. Filipe found (and provided a test for) a difficult bug in reading compressed extents, and Josef fixed up some quota record keeping with snapshot deletion. Chandan killed off an accounting bug during DIO that lead to WARN_ONs as we freed inodes" * 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: keep dropped roots in cache until transaction commit Btrfs: Direct I/O: Fix space accounting btrfs: skip waiting on ordered range for special files Btrfs: fix read corruption of compressed and shared extents Btrfs: remove unnecessary locking of cleaner_mutex to avoid deadlock Btrfs: don't initialize a space info as full to prevent ENOSPC
2015-09-25Merge tag 'nfs-for-4.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable patches: - fix v4.2 SEEK on files over 2 gigs - Fix a layout segment reference leak when pNFS I/O falls back to inband I/O. - Fix recovery of recalled read delegations Bugfixes: - Fix a case where NFSv4 fails to send CLOSE after a server reboot - Fix sunrpc to wait for connections to complete before retrying - Fix sunrpc races between transport connect/disconnect and shutdown - Fix an infinite loop when layoutget fail with BAD_STATEID - nfs/filelayout: Fix NULL reference caused by double freeing of fh_array - Fix a bogus WARN_ON_ONCE() in O_DIRECT when layout commit_through_mds is set - Fix layoutreturn/close ordering issues" * tag 'nfs-for-4.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS41: make close wait for layoutreturn NFS: Skip checking ds_cinfo.buckets when lseg's commit_through_mds is set NFSv4.x/pnfs: Don't try to recover stateids twice in layoutget NFSv4: Recovery of recalled read delegations is broken NFS: Fix an infinite loop when layoutget fail with BAD_STATEID NFS: Do cleanup before resetting pageio read/write to mds SUNRPC: xs_sock_mark_closed() does not need to trigger socket autoclose SUNRPC: Lock the transport layer on shutdown nfs/filelayout: Fix NULL reference caused by double freeing of fh_array SUNRPC: Ensure that we wait for connections to complete before retrying SUNRPC: drop null test before destroy functions nfs: fix v4.2 SEEK on files over 2 gigs SUNRPC: Fix races between socket connection and destroy code nfs: fix pg_test page count calculation Failing to send a CLOSE if file is opened WRONLY and server reboots on a 4.x mount
2015-09-25Merge tag 'sound-4.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This ended up with a larger set of fixes than wished, unfortunately. As diffstat shows, the majority of changes are for various ASoC drivers (Realtek, Wolfson codec drivers, etc), in addition to a couple of HD-audio regression fixes. All these are reasonably small and nothing to scare much" * tag 'sound-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits) ALSA: hda - Disable power_save_node for Thinkpads ALSA: hda/tegra - async probe for avoiding module loading deadlock ASoC: rt5645: Prevent the pop sound in case of playback and the jack is plugging ASoC: rt5645: Increase the delay time to remove the pop sound ASoC: rt5645: Use the type SOC_DAPM_SINGLE_AUTODISABLE to prevent the weird sound in runtime of power up ASoC: pxa: pxa2xx-ac97: fix dma requestor lines MAINTAINERS: Update website and git repo for Wolfson Microelectronics ASoC: fsl_ssi: Fix checking of dai format for AC97 mode ASoC: wm0010: fix error path ASoC: wm0010: fix memory leak ASoC: wm8960: correct the max register value of mic boost pga ASoC: wm8962: remove 64k sample rate support ASoC: davinci-mcasp: Fix devm_kasprintf format string ASoC: fix broken pxa SoC support ASoC: davinci-mcasp: Set .symmetric_rates = 1 in snd_soc_dai_driver ASoC: au1x: psc-i2s: Fix unused variable 'ret' warning ASoC: SPEAr: Make SND_SPEAR_SOC select SND_SOC_GENERIC_DMAENGINE_PCM ASoC: mediatek: Increase periods_min in capture ASoC: davinci-mcasp: Revise the FIFO threshold calculation ASoC: wm8960: correct gain value for input PGA and add microphone PGA ...
2015-09-25Merge tag 'pci-v4.3-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are fixes for things we merged for v4.3 (VPD, MSI, and bridge window management), and a new Renesas R8A7794 SoC device ID. Details: Resource management: - Revert pci_read_bridge_bases() unification (Bjorn Helgaas) - Clear IORESOURCE_UNSET when clipping a bridge window (Bjorn Helgaas) MSI: - Fix MSI IRQ domains for VFs on virtual buses (Alex Williamson) Renesas R-Car host bridge driver: - Add R8A7794 support (Sergei Shtylyov) Miscellaneous: - Fix devfn for VPD access through function 0 (Alex Williamson) - Use function 0 VPD only for identical functions (Alex Williamson)" * tag 'pci-v4.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: rcar: Add R8A7794 support PCI: Use function 0 VPD for identical functions, regular VPD for others PCI: Fix devfn for VPD access through function 0 PCI/MSI: Fix MSI IRQ domains for VFs on virtual buses PCI: Clear IORESOURCE_UNSET when clipping a bridge window PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"
2015-09-25Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "AMD fixes for bugs introduced in the 4.2 merge window, and a few PPC bug fixes too" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: disable halt_poll_ns as default for s390x KVM: x86: fix off-by-one in reserved bits check KVM: x86: use correct page table format to check nested page table reserved bits KVM: svm: do not call kvm_set_cr0 from init_vmcb KVM: x86: trap AMD MSRs for the TSeg base and mask KVM: PPC: Book3S: Take the kvm->srcu lock in kvmppc_h_logical_ci_load/store() KVM: PPC: Book3S HV: Pass the correct trap argument to kvmhv_commence_exit KVM: PPC: Book3S HV: Fix handling of interrupted VCPUs kvm: svm: reset mmu on VCPU reset
2015-09-25Merge tag 'powerpc-4.3-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Wire up sys_membarrier() - cxl: Fix lockdep warning while creating afu_err_buff from Vaibhav * tag 'powerpc-4.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: cxl: Fix lockdep warning while creating afu_err_buff attribute powerpc: Wire up sys_membarrier()
2015-09-25KVM: disable halt_poll_ns as default for s390xDavid Hildenbrand
We observed some performance degradation on s390x with dynamic halt polling. Until we can provide a proper fix, let's enable halt_poll_ns as default only for supported architectures. Architectures are now free to set their own halt_poll_ns default value. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25KVM: x86: fix off-by-one in reserved bits checkPaolo Bonzini
29ecd6601904 ("KVM: x86: avoid uninitialized variable warning", 2015-09-06) introduced a not-so-subtle problem, which probably escaped review because it was not part of the patch context. Before the patch, leaf was always equal to iterator.level. After, it is equal to iterator.level - 1 in the call to is_shadow_zero_bits_set, and when is_shadow_zero_bits_set does another "-1" the check on reserved bits becomes incorrect. Using "iterator.level" in the call fixes this call trace: WARNING: CPU: 2 PID: 17000 at arch/x86/kvm/mmu.c:3385 handle_mmio_page_fault.part.93+0x1a/0x20 [kvm]() Modules linked in: tun sha256_ssse3 sha256_generic drbg binfmt_misc ipv6 vfat fat fuse dm_crypt dm_mod kvm_amd kvm crc32_pclmul aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd fam15h_power amd64_edac_mod k10temp edac_core amdkfd amd_iommu_v2 radeon acpi_cpufreq [...] Call Trace: dump_stack+0x4e/0x84 warn_slowpath_common+0x95/0xe0 warn_slowpath_null+0x1a/0x20 handle_mmio_page_fault.part.93+0x1a/0x20 [kvm] tdp_page_fault+0x231/0x290 [kvm] ? emulator_pio_in_out+0x6e/0xf0 [kvm] kvm_mmu_page_fault+0x36/0x240 [kvm] ? svm_set_cr0+0x95/0xc0 [kvm_amd] pf_interception+0xde/0x1d0 [kvm_amd] handle_exit+0x181/0xa70 [kvm_amd] ? kvm_arch_vcpu_ioctl_run+0x68b/0x1730 [kvm] kvm_arch_vcpu_ioctl_run+0x6f6/0x1730 [kvm] ? kvm_arch_vcpu_ioctl_run+0x68b/0x1730 [kvm] ? preempt_count_sub+0x9b/0xf0 ? mutex_lock_killable_nested+0x26f/0x490 ? preempt_count_sub+0x9b/0xf0 kvm_vcpu_ioctl+0x358/0x710 [kvm] ? __fget+0x5/0x210 ? __fget+0x101/0x210 do_vfs_ioctl+0x2f4/0x560 ? __fget_light+0x29/0x90 SyS_ioctl+0x4c/0x90 entry_SYSCALL_64_fastpath+0x16/0x73 ---[ end trace 37901c8686d84de6 ]--- Reported-by: Borislav Petkov <bp@alien8.de> Tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 03:20:10 +0000