summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-16rtc: sirfsoc: set rangeAlexandre Belloni
This RTC is a 32bit counter running at 16Hz. This overflows every eight years and a half. However, the driver uses the SW_VALUE register to store the overflow, extending the counter to 64bit as long as the update happens before the overflow. Link: https://lore.kernel.org/r/20200305160452.27808-2-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-03-16rtc: sirfsoc: convert to devm_rtc_allocate_deviceAlexandre Belloni
This allows further improvement of the driver. Also remove the unnecessary error string as the core will already display error messages. Link: https://lore.kernel.org/r/20200305160452.27808-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-03-16rtc: snvs: Improve Kconfig dependencyAnson Huang
i.MX SNVS RTC should depend on ARCH_MXC or COMPILE_TEST. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1583136785-4973-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-03-16rtc: sysfs: use kobj_to_devsuguosong
use kobj_to_dev instead of open-conding it Signed-off-by: suguosong <suguosong@xiaomi.com> Link: https://lore.kernel.org/r/20200225021923.8570-1-guosongsu@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-03-03rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()Ville Syrjälä
cmos_interrupt() isn't always called from hardirq context, so we must use spin_lock_irqsave() & co. ================================ WARNING: inconsistent lock state 5.6.0-rc2-CI-CI_DRM_7981+ #1 Tainted: G U -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. rtcwake/4315 [HC0[0]:SC0[0]:HE1:SE1] takes: ffffffff82635198 (rtc_lock){?...}, at: cmos_interrupt+0x18/0x100 {IN-HARDIRQ-W} state was registered at: lock_acquire+0xa7/0x1c0 _raw_spin_lock+0x2a/0x40 cmos_interrupt+0x18/0x100 rtc_handler+0x75/0xc0 acpi_ev_fixed_event_detect+0xf9/0x132 acpi_ev_sci_xrupt_handler+0xb/0x28 acpi_irq+0x13/0x30 __handle_irq_event_percpu+0x41/0x2c0 handle_irq_event_percpu+0x2b/0x70 handle_irq_event+0x2f/0x50 handle_fasteoi_irq+0x8e/0x150 do_IRQ+0x7e/0x160 ret_from_intr+0x0/0x35 mwait_idle+0x7e/0x200 do_idle+0x1bb/0x260 cpu_startup_entry+0x14/0x20 start_secondary+0x15f/0x1b0 secondary_startup_64+0xa4/0xb0 irq event stamp: 42003 hardirqs last enabled at (42003): [<ffffffff81a36567>] _raw_spin_unlock_irqrestore+0x47/0x60 hardirqs last disabled at (42002): [<ffffffff81a362ed>] _raw_spin_lock_irqsave+0xd/0x50 softirqs last enabled at (41848): [<ffffffff81e00385>] __do_softirq+0x385/0x47f softirqs last disabled at (41841): [<ffffffff810bab3a>] irq_exit+0xba/0xc0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rtc_lock); <Interrupt> lock(rtc_lock); *** DEADLOCK *** 6 locks held by rtcwake/4315: #0: ffff888175dc9408 (sb_writers#5){.+.+}, at: vfs_write+0x1a4/0x1d0 #1: ffff88817406ca80 (&of->mutex){+.+.}, at: kernfs_fop_write+0xdd/0x1b0 #2: ffff888179be85e0 (kn->count#236){.+.+}, at: kernfs_fop_write+0xe6/0x1b0 #3: ffffffff82641e00 (system_transition_mutex){+.+.}, at: pm_suspend+0xb3/0x3b0 #4: ffffffff826b3ee0 (acpi_scan_lock){+.+.}, at: acpi_suspend_begin+0x47/0x80 #5: ffff888178fc3960 (&dev->mutex){....}, at: device_resume+0x92/0x1c0 stack backtrace: CPU: 3 PID: 4315 Comm: rtcwake Tainted: G U 5.6.0-rc2-CI-CI_DRM_7981+ #1 Hardware name: Google Soraka/Soraka, BIOS MrChromebox-4.10 08/25/2019 Call Trace: dump_stack+0x71/0x9b mark_lock+0x49a/0x500 ? print_shortest_lock_dependencies+0x200/0x200 __lock_acquire+0x6d4/0x15d0 ? __lock_acquire+0x460/0x15d0 lock_acquire+0xa7/0x1c0 ? cmos_interrupt+0x18/0x100 _raw_spin_lock+0x2a/0x40 ? cmos_interrupt+0x18/0x100 cmos_interrupt+0x18/0x100 cmos_resume+0x1fd/0x290 ? __acpi_pm_set_device_wakeup+0x24/0x100 pnp_bus_resume+0x5e/0x90 ? pnp_bus_suspend+0x10/0x10 dpm_run_callback+0x64/0x280 device_resume+0xd4/0x1c0 ? dpm_watchdog_set+0x60/0x60 dpm_resume+0x106/0x410 ? dpm_resume_early+0x38c/0x3e0 dpm_resume_end+0x8/0x10 suspend_devices_and_enter+0x16f/0xbe0 ? rcu_read_lock_sched_held+0x4d/0x80 pm_suspend+0x344/0x3b0 state_store+0x78/0xe0 kernfs_fop_write+0x112/0x1b0 vfs_write+0xb9/0x1d0 ksys_write+0x9f/0xe0 do_syscall_64+0x4f/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7ff934307154 Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 b1 07 2e 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 41 54 55 49 89 d4 53 48 89 f5 RSP: 002b:00007ffe2647c168 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007ff934307154 RDX: 0000000000000004 RSI: 000055de3ec4e5a0 RDI: 000000000000000a RBP: 000055de3ec4e5a0 R08: 000055de3ec4c5e0 R09: 00007ff9349f3740 R10: 000055de3ec4a010 R11: 0000000000000246 R12: 000055de3ec4c500 R13: 0000000000000004 R14: 00007ff9345df2a0 R15: 00007ff9345de760 Fixes: c6d3a278cc12 ("rtc: cmos: acknowledge ACPI driven wake alarms upon resume") Fixes: 311ee9c151ad ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://lore.kernel.org/r/20200221144739.11746-1-ville.syrjala@linux.intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-02-18rtc: snvs: Remove unused include of of_device.hAnson Huang
There is nothing in use from of_device.h, remove it. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1581823666-16944-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-02-12rtc: zynqmp: Clear alarm interrupt status before interrupt enableSrinivas Neeli
Fix multiple occurring interrupts for alarm interrupt. RTC module doesn't clear the alarm interrupt status bit immediately after the interrupt is triggered.This is due to the sticky nature of the alarm interrupt status register. The alarm interrupt status register can be cleared only after the second counter outruns the set alarm value. To fix multiple spurious interrupts, disable alarm interrupt in the handler and clear the status bit before enabling the alarm interrupt. Fixes: 11143c19eb57 ("rtc: add xilinx zynqmp rtc driver") Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/1581503079-387-1-git-send-email-srinivas.neeli@xilinx.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-02-12rtc: sh: Restore devm_ioremap() alignmentGeert Uytterhoeven
The alignment of the continuation of the devm_ioremap() call in sh_rtc_probe() was broken. Join the lines, as all parameters can fit on a single line. Fixes: 4bdc0d676a643140 ("remove ioremap_nocache and devm_ioremap_nocache") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200212084836.9511-1-geert+renesas@glider.be Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-02-09Linux 5.6-rc1Linus Torvalds
2020-02-09Merge tag 'kbuild-v5.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix randconfig to generate a sane .config - rename hostprogs-y / always to hostprogs / always-y, which are more natual syntax. - optimize scripts/kallsyms - fix yes2modconfig and mod2yesconfig - make multiple directory targets ('make foo/ bar/') work * tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: make multiple directory targets work kconfig: Invalidate all symbols after changing to y or m. kallsyms: fix type of kallsyms_token_table[] scripts/kallsyms: change table to store (strcut sym_entry *) scripts/kallsyms: rename local variables in read_symbol() kbuild: rename hostprogs-y/always to hostprogs/always-y kbuild: fix the document to use extra-y for vmlinux.lds kconfig: fix broken dependency in randconfig-generated .config
2020-02-09Merge tag 'zonefs-5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs Pull new zonefs file system from Damien Le Moal: "Zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with native zoned block device support (e.g. f2fs or the on-going btrfs effort), zonefs does not hide the sequential write constraint of zoned block devices to the user. As a result, zonefs is not a POSIX compliant file system. Its goal is to simplify the implementation of zoned block devices support in applications by replacing raw block device file accesses with a richer file based API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application while at the same time allowing the use of zoned block devices with various programming languages other than C. Zonefs IO management implementation uses the new iomap generic code. Zonefs has been successfully tested using a functional test suite (available with zonefs userland format tool on github) and a prototype implementation of LevelDB on top of zonefs" * tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: Add documentation fs: New zonefs file system
2020-02-09irqchip/gic-v4.1: Avoid 64bit division for the sake of 32bit ARMMarc Zyngier
In order to allow the GICv4 code to link properly on 32bit ARM, make sure we don't use 64bit divisions when it isn't strictly necessary. Fixes: 4e6437f12d6e ("irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-09Merge tag '5.6-rc-smb3-plugfest-patches' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "13 cifs/smb3 patches, most from testing at the SMB3 plugfest this week: - Important fix for multichannel and for modefromsid mounts. - Two reconnect fixes - Addition of SMB3 change notify support - Backup tools fix - A few additional minor debug improvements (tracepoints and additional logging found useful during testing this week)" * tag '5.6-rc-smb3-plugfest-patches' of git://git.samba.org/sfrench/cifs-2.6: smb3: Add defines for new information level, FileIdInformation smb3: print warning once if posix context returned on open smb3: add one more dynamic tracepoint missing from strict fsync path cifs: fix mode bits from dir listing when mounted with modefromsid cifs: fix channel signing cifs: add SMB3 change notification support cifs: make multichannel warning more visible cifs: fix soft mounts hanging in the reconnect code cifs: Add tracepoints for errors on flush or fsync cifs: log warning message (once) if out of disk space cifs: fail i/o on soft mounts if sessionsetup errors out smb3: fix problem with null cifs super block with previous patch SMB3: Backup intent flag missing from some more ops
2020-02-09Merge branch 'work.vboxsf' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vboxfs from Al Viro: "This is the VirtualBox guest shared folder support by Hans de Goede, with fixups for fs_parse folded in to avoid bisection hazards from those API changes..." * 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Add VirtualBox guest shared folder (vboxsf) support
2020-02-09Merge tag 'x86-urgent-2020-02-09' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes for X86: - Ensure that the PIT is set up when the local APIC is disable or configured in legacy mode. This is caused by an ordering issue introduced in the recent changes which skip PIT initialization when the TSC and APIC frequencies are already known. - Handle malformed SRAT tables during early ACPI parsing which caused an infinite loop anda boot hang. - Fix a long standing race in the affinity setting code which affects PCI devices with non-maskable MSI interrupts. The problem is caused by the non-atomic writes of the MSI address (destination APIC id) and data (vector) fields which the device uses to construct the MSI message. The non-atomic writes are mandated by PCI. If both fields change and the device raises an interrupt after writing address and before writing data, then the MSI block constructs a inconsistent message which causes interrupts to be lost and subsequent malfunction of the device. The fix is to redirect the interrupt to the new vector on the current CPU first and then switch it over to the new target CPU. This allows to observe an eventually raised interrupt in the transitional stage (old CPU, new vector) to be observed in the APIC IRR and retriggered on the new target CPU and the new vector. The potential spurious interrupts caused by this are harmless and can in the worst case expose a buggy driver (all handlers have to be able to deal with spurious interrupts as they can and do happen for various reasons). - Add the missing suspend/resume mechanism for the HYPERV hypercall page which prevents resume hibernation on HYPERV guests. This change got lost before the merge window. - Mask the IOAPIC before disabling the local APIC to prevent potentially stale IOAPIC remote IRR bits which cause stale interrupt lines after resume" * tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Mask IOAPIC entries when disabling the local APIC x86/hyperv: Suspend/resume the hypercall page for hibernation x86/apic/msi: Plug non-maskable MSI affinity race x86/boot: Handle malformed SRAT tables during early ACPI parsing x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode
2020-02-09Merge tag 'smp-urgent-2020-02-09' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP fixes from Thomas Gleixner: "Two fixes for the SMP related functionality: - Make the UP version of smp_call_function_single() match SMP semantics when called for a not available CPU. Instead of emitting a warning and assuming that the function call target is CPU0, return a proper error code like the SMP version does. - Remove a superfluous check in smp_call_function_many_cond()" * tag 'smp-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp/up: Make smp_call_function_single() match SMP semantics smp: Remove superfluous cond_func check in smp_call_function_many_cond()
2020-02-09Merge tag 'perf-urgent-2020-02-09' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A set of fixes and improvements for the perf subsystem: Kernel fixes: - Install cgroup events to the correct CPU context to prevent a potential list double add - Prevent an integer underflow in the perf mlock accounting - Add a missing prototype for arch_perf_update_userpage() Tooling: - Add a missing unlock in the error path of maps__insert() in perf maps. - Fix the build with the latest libbfd - Fix the perf parser so it does not delete parse event terms, which caused a regression for using perf with the ARM CoreSight as the sink configuration was missing due to the deletion. - Fix the double free in the perf CPU map merging test case - Add the missing ustring support for the perf probe command" * tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf maps: Add missing unlock to maps__insert() error case perf probe: Add ustring support for perf probe command perf: Make perf able to build with latest libbfd perf test: Fix test case Merge cpu map perf parse: Copy string to perf_evsel_config_term perf parse: Refactor 'struct perf_evsel_config_term' kernel/events: Add a missing prototype for arch_perf_update_userpage() perf/cgroups: Install cgroup events to correct cpuctx perf/core: Fix mlock accounting in perf_mmap()
2020-02-09Merge tag 'timers-urgent-2020-02-09' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "Two small fixes for the time(r) subsystem: - Handle a subtle race between the clocksource watchdog and a concurrent clocksource watchdog stop/start sequence correctly to prevent a timer double add bug. - Fix the file path for the core time namespace file" * tag 'timers-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Prevent double add_timer_on() for watchdog_timer MAINTAINERS: Correct path to time namespace source file
2020-02-09Merge tag 'irq-urgent-2020-02-09' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem: - Provision only ACPI enabled redistributors on GICv3 - Use the proper command colums when building the INVALL command for the GICv3-ITS - Ensure the allocation of the L2 vPE table for GICv4.1 - Correct the GICv4.1 VPROBASER programming so it uses the proper size - A set of small GICv4.1 tidy up patches - Configuration cleanup for C-SKY interrupt chip - Clarify the function documentation for irq_set_wake() to document that the wakeup functionality is orthogonal to the irq disable/enable mechanism" * tag 'irq-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Rename VPENDBASER/VPROPBASER accessors irqchip/gic-v3-its: Remove superfluous WARN_ON irqchip/gic-v4.1: Drop 'tmp' in inherit_vpe_l1_table_from_rd() irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level irqchip/gic-v4.1: Set vpe_l1_base for all redistributors irqchip/gic-v4.1: Fix programming of GICR_VPROPBASER_4_1_SIZE genirq: Clarify that irq wake state is orthogonal to enable/disable irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL irqchip: Some Kconfig cleanup for C-SKY irqchip/gic-v3: Only provision redistributors that are enabled in ACPI
2020-02-09Merge tag 'efi-urgent-2020-02-09' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fix from Thomas Gleixner: "A single fix for a EFI boot regression on X86 which was caused by the recent rework of the EFI memory map parsing. On systems with invalid memmap entries the cleanup function uses an value which cannot be relied on in this stage. Use the actual EFI memmap entry instead" * tag 'efi-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Fix boot regression on systems with invalid memmap entries
2020-02-08Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull misc SCSI fixes from James Bottomley: "Five small patches, all in drivers or doc, which missed the initial pull request. The qla2xxx and megaraid_sas are actual fixes and the rest are spelling and doc changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: fix spelling mistake "initilized" -> "initialized" scsi: pm80xx: fix spelling mistake "to" -> "too" scsi: MAINTAINERS: ufs: remove pedrom.sousa@synopsys.com scsi: megaraid_sas: fixup MSIx interrupt setup during resume scsi: qla2xxx: Fix unbound NVME response length
2020-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Unbalanced locking in mwifiex_process_country_ie, from Brian Norris. 2) Fix thermal zone registration in iwlwifi, from Andrei Otcheretianski. 3) Fix double free_irq in sgi ioc3 eth, from Thomas Bogendoerfer. 4) Use after free in mptcp, from Florian Westphal. 5) Use after free in wireguard's root_remove_peer_lists, from Eric Dumazet. 6) Properly access packets heads in bonding alb code, from Eric Dumazet. 7) Fix data race in skb_queue_len(), from Qian Cai. 8) Fix regression in r8169 on some chips, from Heiner Kallweit. 9) Fix XDP program ref counting in hv_netvsc, from Haiyang Zhang. 10) Certain kinds of set link netlink operations can cause a NULL deref in the ipv6 addrconf code. Fix from Eric Dumazet. 11) Don't cancel uninitialized work queue in drop monitor, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) net: thunderx: use proper interface type for RGMII mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap bpf: Improve bucket_log calculation logic selftests/bpf: Test freeing sockmap/sockhash with a socket in it bpf, sockhash: Synchronize_rcu before free'ing map bpf, sockmap: Don't sleep while holding RCU lock on tear-down bpftool: Don't crash on missing xlated program instructions bpf, sockmap: Check update requirements after locking drop_monitor: Do not cancel uninitialized work item mlxsw: spectrum_dpipe: Add missing error path mlxsw: core: Add validation of hardware device types for MGPIR register mlxsw: spectrum_router: Clear offload indication from IPv6 nexthops on abort selftests: mlxsw: Add test cases for local table route replacement mlxsw: spectrum_router: Prevent incorrect replacement of local table routes net: dsa: microchip: enable module autoprobe ipv6/addrconf: fix potential NULL deref in inet6_set_link_af() dpaa_eth: support all modes with rate adapting PHYs net: stmmac: update pci platform data to use phy_interface net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter ...
2020-02-08fs: Add VirtualBox guest shared folder (vboxsf) supportHans de Goede
VirtualBox hosts can share folders with guests, this commit adds a VFS driver implementing the Linux-guest side of this, allowing folders exported by the host to be mounted under Linux. This driver depends on the guest <-> host IPC functions exported by the vboxguest driver. Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-08Merge tag 'powerpc-5.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix an existing bug in our user access handling, exposed by one of the bug fixes we merged this cycle. - A fix for a boot hang on 32-bit with CONFIG_TRACE_IRQFLAGS and the recently added CONFIG_VMAP_STACK. Thanks to: Christophe Leroy, Guenter Roeck. * tag 'powerpc-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Fix CONFIG_TRACE_IRQFLAGS with CONFIG_VMAP_STACK powerpc/futex: Fix incorrect user access blocking
2020-02-08Fix up remaining devm_ioremap_nocache() in SGI IOC3 8250 UART driverLinus Torvalds
This is a merge error on my part - the driver was merged into mainline by commit c5951e7c8ee5 ("Merge tag 'mips_5.6' of git://../mips/linux") over a week ago, but nobody apparently noticed that it didn't actually build due to still having a reference to the devm_ioremap_nocache() function, removed a few days earlier through commit 6a1000bd2703 ("Merge tag 'ioremap-5.6' of git://../ioremap"). Apparently this didn't get any build testing anywhere. Not perhaps all that surprising: it's restricted to 64-bit MIPS only, and only with the new SGI_MFD_IOC3 support enabled. I only noticed because the ioremap conflicts in the ARM SoC driver update made me check there weren't any others hiding, and I found this one. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-08Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC late updates from Olof Johansson: "This is some material that we picked up into our tree late, or that had more complex dependencies on more than one topic branch that makes sense to keep separately. - TI support for secure accelerators and hwrng on OMAP4/5 - TI camera changes for dra7 and am437x and SGX improvement due to better reset control support on am335x, am437x and dra7 - Davinci moves to proper clocksource on DM365, and regulator/audio improvements for DM365 and DM644x eval boards" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits) ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt ARM: dts: Configure interconnect target module for am437x sgx ARM: dts: Configure sgx for dra7 ARM: dts: Configure rstctrl reset for am335x SGX ARM: dts: dra7: Add ti-sysc node for VPE ARM: dts: dra7: add vpe clkctrl node ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries ARM: dts: am43xx: add support for clkout1 clock arm: dts: dra76-evm: Add CAL and OV5640 nodes arm: dtsi: dra76x: Add CAL dtsi node arm: dts: dra72-evm-common: Add entries for the CSI2 cameras ARM: dts: DRA72: Add CAL dtsi node ARM: dts: dra7-l4: Add ti-sysc node for CAM ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only ARM: dts: dra7: add cam clkctrl node ARM: OMAP2+: Drop legacy platform data for omap4 des ARM: OMAP2+: Drop legacy platform data for omap4 sham ARM: OMAP2+: Drop legacy platform data for omap4 aes ...
2020-02-08Merge tag 'armsoc-defconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC defconfig updates from Olof Johansson: "We keep this in a separate branch to avoid cross-branch conflicts, but most of the material here is fairly boring -- some new drivers turned on for hardware since they were merged, and some refreshed files due to time having moved a lot of entries around" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits) ARM: configs: at91: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B arm64: defconfig: Enable Broadcom's GENET Ethernet controller ARM: multi_v7_defconfig: Enable devfreq thermal integration ARM: exynos_defconfig: Enable devfreq thermal integration ARM: multi_v7_defconfig: Enable NFS v4.1 and v4.2 ARM: exynos_defconfig: Enable NFS v4.1 and v4.2 arm64: defconfig: Enable Actions Semi specific drivers arm64: defconfig: Enable Broadcom's STB PCIe controller arm64: defconfig: Enable CONFIG_CLK_IMX8MP by default ARM: configs: at91: enable config flags for sam9x60 SoC ARM: configs: at91: use savedefconfig arm64: defconfig: Enable tegra XUDC support ARM: defconfig: gemini: Update defconfig arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM arm64: defconfig: enable CONFIG_QCOM_CPR arm64: defconfig: Enable HFPLL arm64: defconfig: Enable CRYPTO_DEV_FSL_CAAM ARM: imx_v6_v7_defconfig: Select the TFP410 driver ARM: imx_v6_v7_defconfig: Enable NFS_V4_1 and NFS_V4_2 support arm64: defconfig: Enable ATH10K_SNOC ...
2020-02-08Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
2020-02-08Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...
2020-02-08Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Olof Johansson: "Most of these are smaller fixes that have accrued, and some continued cleanup of OMAP platforms towards shared frameworks. One new SoC from Atmel/Microchip: sam9x60" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) ARM: OMAP2+: Fix undefined reference to omap_secure_init ARM: s3c64xx: Drop unneeded select of TIMER_OF ARM: exynos: Drop unneeded select of MIGHT_HAVE_CACHE_L2X0 ARM: s3c24xx: Switch to atomic pwm API in rx1950 ARM: OMAP2+: sleep43xx: Call secure suspend/resume handlers ARM: OMAP2+: Use ARM SMC Calling Convention when OP-TEE is available ARM: OMAP2+: Introduce check for OP-TEE in omap_secure_init() ARM: OMAP2+: Add omap_secure_init callback hook for secure initialization ARM: at91: Documentation: add sam9x60 product and datasheet ARM: at91: pm: use of_device_id array to find the proper shdwc node ARM: at91: pm: use SAM9X60 PMC's compatible ARM: imx: only select ARM_ERRATA_814220 for ARMv7-A ARM: zynq: use physical cpuid in zynq_slcr_cpu_stop/start ARM: tegra: Use clk_m CPU on Tegra124 LP1 resume ARM: tegra: Modify reshift divider during LP1 ARM: tegra: Enable PLLP bypass during Tegra124 LP1 ARM: samsung: Rename Samsung and Exynos to lowercase ARM: exynos: Correct the help text for platform Kconfig option ARM: bcm: Select ARM_AMBA for ARCH_BRCMSTB ARM: brcmstb: Add debug UART entry for 7216 ...
2020-02-08Merge tag 'compat-ioctl-fix' of ↵Linus Torvalds
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull compat-ioctl fix from Arnd Bergmann: "One patch in the compat-ioctl series broke 32-bit rootfs for multiple people testing on 64-bit kernels. Let's fix it in -rc1 before others run into the same issue" * tag 'compat-ioctl-fix' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: compat_ioctl: fix FIONREAD on devices
2020-02-08Merge branch 'merge.nfs-fs_parse.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs file system parameter updates from Al Viro: "Saner fs_parser.c guts and data structures. The system-wide registry of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is the horror switch() in fs_parse() that would have to grow another case every time something got added to that system-wide registry. New syntax types can be added by filesystems easily now, and their namespace is that of functions - not of system-wide enum members. IOW, they can be shared or kept private and if some turn out to be widely useful, we can make them common library helpers, etc., without having to do anything whatsoever to fs_parse() itself. And we already get that kind of requests - the thing that finally pushed me into doing that was "oh, and let's add one for timeouts - things like 15s or 2h". If some filesystem really wants that, let them do it. Without somebody having to play gatekeeper for the variants blessed by direct support in fs_parse(), TYVM. Quite a bit of boilerplate is gone. And IMO the data structures make a lot more sense now. -200LoC, while we are at it" * 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits) tmpfs: switch to use of invalfc() cgroup1: switch to use of errorfc() et.al. procfs: switch to use of invalfc() hugetlbfs: switch to use of invalfc() cramfs: switch to use of errofc() et.al. gfs2: switch to use of errorfc() et.al. fuse: switch to use errorfc() et.al. ceph: use errorfc() and friends instead of spelling the prefix out prefix-handling analogues of errorf() and friends turn fs_param_is_... into functions fs_parse: handle optional arguments sanely fs_parse: fold fs_parameter_desc/fs_parameter_spec fs_parser: remove fs_parameter_description name field add prefix to fs_context->log ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log new primitive: __fs_parse() switch rbd and libceph to p_log-based primitives struct p_log, variants of warnf() et.al. taking that one instead teach logfc() to handle prefices, give it saner calling conventions get rid of cg_invalf() ...
2020-02-08Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: - bmap series from cmaiolino - getting rid of convolutions in copy_mount_options() (use a couple of copy_from_user() instead of the __get_user() crap) * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: saner copy_mount_options() fibmap: Reject negative block numbers fibmap: Use bmap instead of ->bmap method in ioctl_fibmap ecryptfs: drop direct calls to ->bmap cachefiles: drop direct usage of ->bmap method. fs: Enable bmap() function to properly return errors
2020-02-08Merge branch 'pipe-exclusive-wakeup'Linus Torvalds
Merge thundering herd avoidance on pipe IO. This would have been applied for 5.5 already, but got delayed because of a user-space race condition in the GNU make jobserver code. Now that there's a new GNU make 4.3 release, and most distributions seem to have at least applied the (almost three year old) fix for the problem, let's see if people notice. And it might have been just bad random timing luck on my machine. If you do hit the race condition, things will still work, but the symptom is that you don't get nearly the expected parallelism when using "make -j<N>". The jobserver bug can definitely happen without this patch too, but seems to be easier to trigger when we no longer wake up pipe waiters unnecessarily. * pipe-exclusive-wakeup: pipe: use exclusive waits when reading or writing
2020-02-08pipe: use exclusive waits when reading or writingLinus Torvalds
This makes the pipe code use separate wait-queues and exclusive waiting for readers and writers, avoiding a nasty thundering herd problem when there are lots of readers waiting for data on a pipe (or, less commonly, lots of writers waiting for a pipe to have space). While this isn't a common occurrence in the traditional "use a pipe as a data transport" case, where you typically only have a single reader and a single writer process, there is one common special case: using a pipe as a source of "locking tokens" rather than for data communication. In particular, the GNU make jobserver code ends up using a pipe as a way to limit parallelism, where each job consumes a token by reading a byte from the jobserver pipe, and releases the token by writing a byte back to the pipe. This pattern is fairly traditional on Unix, and works very well, but will waste a lot of time waking up a lot of processes when only a single reader needs to be woken up when a writer releases a new token. A simplified test-case of just this pipe interaction is to create 64 processes, and then pass a single token around between them (this test-case also intentionally passes another token that gets ignored to test the "wake up next" logic too, in case anybody wonders about it): #include <unistd.h> int main(int argc, char **argv) { int fd[2], counters[2]; pipe(fd); counters[0] = 0; counters[1] = -1; write(fd[1], counters, sizeof(counters)); /* 64 processes */ fork(); fork(); fork(); fork(); fork(); fork(); do { int i; read(fd[0], &i, sizeof(i)); if (i < 0) continue; counters[0] = i+1; write(fd[1], counters, (1+(i & 1)) *sizeof(int)); } while (counters[0] < 1000000); return 0; } and in a perfect world, passing that token around should only cause one context switch per transfer, when the writer of a token causes a directed wakeup of just a single reader. But with the "writer wakes all readers" model we traditionally had, on my test box the above case causes more than an order of magnitude more scheduling: instead of the expected ~1M context switches, "perf stat" shows 231,852.37 msec task-clock # 15.857 CPUs utilized 11,250,961 context-switches # 0.049 M/sec 616,304 cpu-migrations # 0.003 M/sec 1,648 page-faults # 0.007 K/sec 1,097,903,998,514 cycles # 4.735 GHz 120,781,778,352 instructions # 0.11 insn per cycle 27,997,056,043 branches # 120.754 M/sec 283,581,233 branch-misses # 1.01% of all branches 14.621273891 seconds time elapsed 0.018243000 seconds user 3.611468000 seconds sys before this commit. After this commit, I get 5,229.55 msec task-clock # 3.072 CPUs utilized 1,212,233 context-switches # 0.232 M/sec 103,951 cpu-migrations # 0.020 M/sec 1,328 page-faults # 0.254 K/sec 21,307,456,166 cycles # 4.074 GHz 12,947,819,999 instructions # 0.61 insn per cycle 2,881,985,678 branches # 551.096 M/sec 64,267,015 branch-misses # 2.23% of all branches 1.702148350 seconds time elapsed 0.004868000 seconds user 0.110786000 seconds sys instead. Much better. [ Note! This kernel improvement seems to be very good at triggering a race condition in the make jobserver (in GNU make 4.2.1) for me. It's a long known bug that was fixed back in June 2017 by GNU make commit b552b0525198 ("[SV 51159] Use a non-blocking read with pselect to avoid hangs."). But there wasn't a new release of GNU make until 4.3 on Jan 19 2020, so a number of distributions may still have the buggy version. Some have backported the fix to their 4.2.1 release, though, and even without the fix it's quite timing-dependent whether the bug actually is hit. ] Josh Triplett says: "I've been hammering on your pipe fix patch (switching to exclusive wait queues) for a month or so, on several different systems, and I've run into no issues with it. The patch *substantially* improves parallel build times on large (~100 CPU) systems, both with parallel make and with other things that use make's pipe-based jobserver. All current distributions (including stable and long-term stable distributions) have versions of GNU make that no longer have the jobserver bug" Tested-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-08compat_ioctl: fix FIONREAD on devicesArnd Bergmann
My final cleanup patch for sys_compat_ioctl() introduced a regression on the FIONREAD ioctl command, which is used for both regular and special files, but only works on regular files after my patch, as I had missed the warning that Al Viro put into a comment right above it. Change it back so it can work on any file again by moving the implementation to do_vfs_ioctl() instead. Fixes: 77b9040195de ("compat_ioctl: simplify the implementation") Reported-and-tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Reported-and-tested-by: youling257 <youling257@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-02-08Merge tag 'irqchip-fixes-5.6-1' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes for 5.6, take #1 from Marc Zyngier: - Guarantee allocation of L2 vPE table for GICv4.1 - Fix GICv4.1 VPROPBASER programming - Numerous GICv4.1 tidy ups - Fix disabled GICv3 redistributor provisioning with ACPI - KConfig cleanup for C-SKY
2020-02-08net: thunderx: use proper interface type for RGMIITim Harvey
The configuration of the OCTEONTX XCV_DLL_CTL register via xcv_init_hw() is such that the RGMII RX delay is bypassed leaving the RGMII TX delay enabled in the MAC: /* Configure DLL - enable or bypass * TX no bypass, RX bypass */ cfg = readq_relaxed(xcv->reg_base + XCV_DLL_CTL); cfg &= ~0xFF03; cfg |= CLKRX_BYP; writeq_relaxed(cfg, xcv->reg_base + XCV_DLL_CTL); This would coorespond to a interface type of PHY_INTERFACE_MODE_RGMII_RXID and not PHY_INTERFACE_MODE_RGMII. Fixing this allows RGMII PHY drivers to do the right thing (enable RX delay in the PHY) instead of erroneously enabling both delays in the PHY. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-08Merge tag 'wireless-drivers-2020-02-08' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.6 First set of fixes for v5.6. Buffer overflow fixes to mwifiex, quite a few functionality fixes to iwlwifi and smaller fixes to other drivers. mwifiex * fix an unlock from a previous security fix * fix two buffer overflows libertas * fix two bugs from previous security fixes iwlwifi * fix module removal with multiple NICs * don't treat IGTK removal failure as an error * avoid FW crashes due to DTS measurement races * fix a potential use after free in FTM code * prevent a NULL pointer dereference in iwl_mvm_cfg_he_sta() * fix TDLS discovery * check all CPUs when trying to detect an error during resume rtw88 * fix clang warning mt76 * fix reading of max_nss value from a register ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2020-02-07 The following pull-request contains BPF updates for your *net* tree. We've added 15 non-merge commits during the last 10 day(s) which contain a total of 12 files changed, 114 insertions(+), 31 deletions(-). The main changes are: 1) Various BPF sockmap fixes related to RCU handling in the map's tear- down code, from Jakub Sitnicki. 2) Fix macro state explosion in BPF sk_storage map when calculating its bucket_log on allocation, from Martin KaFai Lau. 3) Fix potential BPF sockmap update race by rechecking socket's established state under lock, from Lorenz Bauer. 4) Fix crash in bpftool on missing xlated instructions when kptr_restrict sysctl is set, from Toke Høiland-Jørgensen. 5) Fix i40e's XSK wakeup code to return proper error in busy state and various misc fixes in xdpsock BPF sample code, from Maciej Fijalkowski. 6) Fix the way modifiers are skipped in BTF in the verifier while walking pointers to avoid program rejection, from Alexei Starovoitov. 7) Fix Makefile for runqslower BPF tool to i) rebuild on libbpf changes and ii) to fix undefined reference linker errors for older gcc version due to order of passed gcc parameters, from Yulia Kartseva and Song Liu. 8) Fix a trampoline_count BPF kselftest warning about missing braces around initializer, from Andrii Nakryiko. 9) Fix up redundant "HAVE" prefix from large INSN limit kernel probe in bpftool, from Michal Rostecki. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-08powerpc: Fix CONFIG_TRACE_IRQFLAGS with CONFIG_VMAP_STACKChristophe Leroy
When CONFIG_PROVE_LOCKING is selected together with (now default) CONFIG_VMAP_STACK, kernel enter deadlock during boot. At the point of checking whether interrupts are enabled or not, the value of MSR saved on stack is read using the physical address of the stack. But at this point, when using VMAP stack the DATA MMU translation has already been re-enabled, leading to deadlock. Don't use the physical address of the stack when CONFIG_VMAP_STACK is set. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: 028474876f47 ("powerpc/32: prepare for CONFIG_VMAP_STACK") Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/daeacdc0dec0416d1c587cc9f9e7191ad3068dc0.1581095957.git.christophe.leroy@c-s.fr
2020-02-08powerpc/futex: Fix incorrect user access blockingMichael Ellerman
The early versions of our kernel user access prevention (KUAP) were written by Russell and Christophe, and didn't have separate read/write access. At some point I picked up the series and added the read/write access, but I failed to update the usages in futex.h to correctly allow read and write. However we didn't notice because of another bug which was causing the low-level code to always enable read and write. That bug was fixed recently in commit 1d8f739b07bd ("powerpc/kuap: Fix set direction in allow/prevent_user_access()"). futex_atomic_cmpxchg_inatomic() is passed the user address as %3 and does: 1: lwarx %1, 0, %3 cmpw 0, %1, %4 bne- 3f 2: stwcx. %5, 0, %3 Which clearly loads and stores from/to %3. The logic in arch_futex_atomic_op_inuser() is similar, so fix both of them to use allow_read_write_user(). Without this fix, and with PPC_KUAP_DEBUG=y, we see eg: Bug: Read fault blocked by AMR! WARNING: CPU: 94 PID: 149215 at arch/powerpc/include/asm/book3s/64/kup-radix.h:126 __do_page_fault+0x600/0xf30 CPU: 94 PID: 149215 Comm: futex_requeue_p Tainted: G W 5.5.0-rc7-gcc9x-g4c25df5640ae #1 ... NIP [c000000000070680] __do_page_fault+0x600/0xf30 LR [c00000000007067c] __do_page_fault+0x5fc/0xf30 Call Trace: [c00020138e5637e0] [c00000000007067c] __do_page_fault+0x5fc/0xf30 (unreliable) [c00020138e5638c0] [c00000000000ada8] handle_page_fault+0x10/0x30 --- interrupt: 301 at cmpxchg_futex_value_locked+0x68/0xd0 LR = futex_lock_pi_atomic+0xe0/0x1f0 [c00020138e563bc0] [c000000000217b50] futex_lock_pi_atomic+0x80/0x1f0 (unreliable) [c00020138e563c30] [c00000000021b668] futex_requeue+0x438/0xb60 [c00020138e563d60] [c00000000021c6cc] do_futex+0x1ec/0x2b0 [c00020138e563d90] [c00000000021c8b8] sys_futex+0x128/0x200 [c00020138e563e20] [c00000000000b7ac] system_call+0x5c/0x68 Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection") Cc: stable@vger.kernel.org # v5.2+ Reported-by: syzbot+e808452bad7c375cbee6@syzkaller-ppc64.appspotmail.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/20200207122145.11928-1-mpe@ellerman.id.au
2020-02-08irqchip/gic-v3-its: Rename VPENDBASER/VPROPBASER accessorsZenghui Yu
V{PEND,PROP}BASER registers are actually located in VLPI_base frame of the *redistributor*. Rename their accessors to reflect this fact. No functional changes. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-7-yuzenghui@huawei.com
2020-02-08irqchip/gic-v3-its: Remove superfluous WARN_ONZenghui Yu
"ITS virtual pending table not cleaning" is already complained inside its_clear_vpend_valid(), there's no need to trigger a WARN_ON again. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-6-yuzenghui@huawei.com
2020-02-08irqchip/gic-v4.1: Drop 'tmp' in inherit_vpe_l1_table_from_rd()Zenghui Yu
The variable 'tmp' in inherit_vpe_l1_table_from_rd() is actually not needed, drop it. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-5-yuzenghui@huawei.com
2020-02-08irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD levelZenghui Yu
In GICv4, we will ensure that level2 vPE table memory is allocated for the specified vpe_id on all v4 ITS, in its_alloc_vpe_table(). This still works well for the typical GICv4.1 implementation, where the new vPE table is shared between the ITSs and the RDs. To make it explicit, let us introduce allocate_vpe_l2_table() to make sure that the L2 tables are allocated on all v4.1 RDs. We're likely not need to allocate memory in it because the vPE table is shared and (L2 table is) already allocated at ITS level, except for the case where the ITS doesn't share anything (say SVPET == 0, practically unlikely but architecturally allowed). The implementation of allocate_vpe_l2_table() is mostly copied from its_alloc_table_entry(). Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-4-yuzenghui@huawei.com
2020-02-08irqchip/gic-v4.1: Set vpe_l1_base for all redistributorsZenghui Yu
Currently, we will not set vpe_l1_page for the current RD if we can inherit the vPE configuration table from another RD (or ITS), which results in an inconsistency between RDs within the same CommonLPIAff group. Let's rename it to vpe_l1_base to indicate the base address of the vPE configuration table of this RD, and set it properly for *all* v4.1 redistributors. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-3-yuzenghui@huawei.com
2020-02-08irqchip/gic-v4.1: Fix programming of GICR_VPROPBASER_4_1_SIZEZenghui Yu
The Size field of GICv4.1 VPROPBASER register indicates number of pages minus one and together Page_Size and Size control the vPEID width. Let's respect this requirement of the architecture. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-2-yuzenghui@huawei.com
2020-02-08mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_capLorenzo Bianconi
Fix u8 cast reading max_nss from MT_TOP_STRAP_STA register in mt7615_eeprom_parse_hw_cap routine Fixes: acf5457fd99db ("mt76: mt7615: read {tx,rx} mask from eeprom") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-02-07Merge tag 'fuse-fixes-5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: - Fix a regression introduced in v5.1 that triggers WARNINGs for some fuse filesystems - Fix an xfstest failure - Allow overlayfs to be used on top of fuse/virtiofs - Code and documentation cleanups * tag 'fuse-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: use true,false for bool variable Documentation: filesystems: convert fuse to RST fuse: Support RENAME_WHITEOUT flag fuse: don't overflow LLONG_MAX with end offset fix up iter on short count in fuse_direct_io()
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 02:21:53 +0000