summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-03netlink: 2-clause nla_ok()Alexey Dobriyan
nla_ok() consists of 3 clauses: 1) int rem >= (int)sizeof(struct nlattr) 2) u16 nla_len >= sizeof(struct nlattr) 3) u16 nla_len <= int rem The statement is that clause (1) is redundant. What it does is ensuring that "rem" is a positive number, so that in clause (3) positive number will be compared to positive number with no problems. However, "u16" fully fits into "int" and integers do not change value when upcasting even to signed type. Negative integers will be rejected by clause (3) just fine. Small positive integers will be rejected by transitivity of comparison operator. NOTE: all of the above DOES NOT apply to nlmsg_ok() where ->nlmsg_len is u32(!), so 3 clauses AND A CAST TO INT are necessary. Obligatory space savings report: -1.6 KB $ ./scripts/bloat-o-meter ../vmlinux-000* ../vmlinux-001* add/remove: 0/0 grow/shrink: 3/63 up/down: 35/-1692 (-1657) function old new delta validate_scan_freqs 142 155 +13 tcf_em_tree_validate 867 879 +12 dcbnl_ieee_del 328 338 +10 netlbl_cipsov4_add_common.isra 218 215 -3 ... ovs_nla_put_actions 888 806 -82 netlbl_cipsov4_add_std 1648 1566 -82 nl80211_parse_sched_scan 2889 2780 -109 ip_tun_from_nlattr 3086 2945 -141 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03staging: wilc1000: use reset to set mac headerZhang Shengju
Since offset is zero, it's not necessary to use set function. Reset function is straightforward, and will remove the unnecessary add operation in set function. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03iwlwifi: use reset to set transport headerZhang Shengju
Since offset is zero, it's not necessary to use set function. Reset function is straightforward, and will remove the unnecessary add operation in set function. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03mlx4: use reset to set mac headerZhang Shengju
Since offset is zero, it's not necessary to use set function. Reset function is straightforward, and will remove the unnecessary add operation in set function. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03bnx2x: use reset to set network headerZhang Shengju
Since offset is zero, it's not necessary to use set function. Reset function is straightforward, and will remove the unnecessary add operation in set function. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03qede: use reset to set network headerZhang Shengju
Since offset is zero, it's not necessary to use set function. Reset function is straightforward, and will remove the unnecessary add operation in set function. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03Merge branch 'xgene-jumbo-and-pause-frame'David S. Miller
Iyappan Subramanian says: ==================== drivers: net: xgene: Add Jumbo and Pause frame support This patch set adds, 1. Jumbo frame support 2. Pause frame based flow control and fixes RSS for non-TCP/UDP packets. ==================== Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
2016-12-03drivers: net: xgene: ethtool: Add get/set_pauseparamIyappan Subramanian
This patch adds get_pauseparam and set_pauseparam functions. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03drivers: net: xgene: Add flow control initializationIyappan Subramanian
This patch adds flow control/pause frame initialization and advertising capabilities. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03drivers: net: xgene: Add flow control configurationIyappan Subramanian
This patch adds functions to configure mac, when flow control and pause frame settings change. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03drivers: net: xgene: fix: RSS for non-TCP/UDPIyappan Subramanian
This patch fixes RSS feature, for non-TCP/UDP packets. Signed-off-by: Khuong Dinh <kdinh@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03drivers: net: xgene: Add change_mtu functionIyappan Subramanian
This patch implements ndo_change_mtu() callback function that enables mtu change. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03drivers: net: xgene: Add support for Jumbo frameIyappan Subramanian
This patch adds support for jumbo frame, by allocating additional buffer (page) pool and configuring the hardware. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03drivers: net: xgene: Configure classifier with pagepoolIyappan Subramanian
This patch configures classifier with the pagepool information. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03drivers: net: xgene: Add helper functionIyappan Subramanian
This is a prepartion patch and adds xgene_enet_get_fpsel() helper function to get buffer pool number. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03net: ethernet: ti: davinci_cpdma: add missing EXPORTsPaul Gortmaker
As of commit 8f32b90981dcdb355516fb95953133f8d4e6b11d ("net: ethernet: ti: davinci_cpdma: add set rate for a channel") the ARM allmodconfig builds would fail modpost with: ERROR: "cpdma_chan_set_weight" [drivers/net/ethernet/ti/ti_cpsw.ko] undefined! ERROR: "cpdma_chan_get_rate" [drivers/net/ethernet/ti/ti_cpsw.ko] undefined! ERROR: "cpdma_chan_get_min_rate" [drivers/net/ethernet/ti/ti_cpsw.ko] undefined! ERROR: "cpdma_chan_set_rate" [drivers/net/ethernet/ti/ti_cpsw.ko] undefined! Since these weren't declared as static, it is assumed they were meant to be shared outside the file, and that modular build testing was simply overlooked. Fixes: 8f32b90981dc ("net: ethernet: ti: davinci_cpdma: add set rate for a channel") Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: linux-omap@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03Merge tag 'linux-can-next-for-4.10-20161201' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2016-12-01 this is a pull request of 4 patches for net-next/master. There are two patches by Chris Paterson for the rcar_can and rcar_canfd device tree binding documentation. And a patch by Geert Uytterhoeven that corrects the order of interrupt specifiers. The fourth patch by Colin Ian King fixes a spelling error in the kvaser_usb driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03net: stmmac: unify mdio functionsLABBE Corentin
stmmac_mdio_{read|write} and stmmac_mdio_{read|write}_gmac4 are not enought different for being split. The only differences between thoses two functions are shift/mask for addr/reg/clk_csr. This patch introduce a per platform set of variable for setting thoses shift/mask and unify mdio read and write functions. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03net: stmmac: avoid Camelcase namingLABBE Corentin
This patch simply rename regValue to value, like it was named in other mdio functions. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03irda: w83977af_ir: fix damaged whitespaceArnd Bergmann
As David Miller pointed out for for the previous patch, the whitespace in some functions looks rather odd. This was caused by commit 6329da5f258a ("obsolete config in kernel source: USE_INTERNAL_TIMER"), which removed some conditions but did not reindent the code. This fixes the indentation in the file and removes extraneous whitespace at the end of the lines and before tabs. There are many other minor coding style problems in the driver, but I'm not touching those here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03stmmac: cleanup documenation, make it match realityPavel Machek
Fix english in documentation, make documentation match reality, remove options that were removed from code. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Couple conflicts resolved here: 1) In the MACB driver, a bug fix to properly initialize the RX tail pointer properly overlapped with some changes to support variable sized rings. 2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix overlapping with a reorganization of the driver to support ACPI, OF, as well as PCI variants of the chip. 3) In 'net' we had several probe error path bug fixes to the stmmac driver, meanwhile a lot of this code was cleaned up and reorganized in 'net-next'. 4) The cls_flower classifier obtained a helper function in 'net-next' called __fl_delete() and this overlapped with Daniel Borkamann's bug fix to use RCU for object destruction in 'net'. It also overlapped with Jiri's change to guard the rhashtable_remove_fast() call with a check against tc_skip_sw(). 5) In mlx4, a revert bug fix in 'net' overlapped with some unrelated changes in 'net-next'. 6) In geneve, a stale header pointer after pskb_expand_head() bug fix in 'net' overlapped with a large reorganization of the same code in 'net-next'. Since the 'net-next' code no longer had the bug in question, there was nothing to do other than to simply take the 'net-next' hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02i40e: change message to only appear when extra debug info is wantedCarolyn Wyborny
This patch changes an X722 informational message so that it only appears when extra messages are desired. Without this patch, on X722 devices, this message appears at load, potentially causing unnecessary alarm. Change-ID: I94f7aae15dc5b2723cc9728c630c72538a3e670e Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e/i40evf: replace for memcpy with single memcpy call in ethtoolJacob Keller
memcpy replaced with single memcpy call in ethtool. Change-ID: I3f5bef6bcc593412c56592c6459784db41575a0a Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: set broadcast promiscuous mode for each active VLANJacob Keller
A previous workaround added to ensure receipt of all broadcast frames incorrectly set the broadcast promiscuous mode unconditionally regardless of active VLAN status. Replace this partial workaround with a complete solution that sets the broadcast promiscuous filters in i40e_sync_vsi_filters. This new method sets the promiscuous mode based on when broadcast filters are added or removed. I40E_VLAN_ANY will request a broadcast filter for all VLANs, (as we're in untagged mode) while a broadcast filter on a specific VLAN will only request broadcast for that VLAN. Thus, we restore addition of broadcast filter to the array, but we add special handling for these such that they enable the broadcast promiscuous mode instead of being sent as regular filters. The end result is that we will correctly receive all broadcast packets (even those with a *source* address equal to the broadcast address) but will not receive packets for which we don't have an active VLAN filter. Change-ID: I7d0585c5cec1a5bf55bf533b42e5e817d5db6a2d Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: Fix for ethtool Supported link modesHarshitha Ramamurthy
This patch fixes the problem where the ethtool Supported link modes list backplane interfaces on X722 devices for 10GbE with SFP+ and Cortina retimer. This patch fixes the problem by setting and using a flag for this particular device since the backplane interface is only between the internal PHY and the retimer and it should not be seen by the user as they cannot use it. Without this patch, the user wrongly thinks that backplane interfaces are supported on their device when they actually are not. Change-ID: I3882bc2928431d48a2db03a51a713a1f681a79e9 Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40evf: protect against NULL msix_entries and q_vectors pointersJacob Keller
Update the functions which free msix_entries and q_vectors so that they are safe against NULL values. This allows calling code to not care whether these have already been freed when disabling and freeing them. Change-ID: I31bfd1c0da18023d971b618edc6fb049721f3298 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: Pass unknown PHY type for unknown PHYsHenry Tieman
The PHY type value for unrecognized PHYs and cables was changed based on firmware version number. Newer hardware use lower firmware version numbers and this was causing some PHYs to be identified as type 0x16 instead of 0xe (unknown). Without this patch, newer card will incorrectly identify unknown PHYs and cables. This change adds hardware type to the check for firmware version so the PHY type is reported correctly. Change-ID: I0723cbfd263c76fc73ff1a5275d1639051376c9a Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: Remove unreachable codeHenry Tieman
The code at the end of i40e_read_phy_register_clause22() contained unreachable code and redundant control statements. This change removes the unreachable code. And deletes the redundant goto statement and if statement. Change-ID: I713032b1585396f40f903cbcfdea987abd874400 Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40evf: check for msix_entries null dereferenceAlan Brady
It is possible for msix_entries to be freed by a previous suspend/remove before a VF is closed. This patch fixes the issue by checking for NULL before dereferencing msix_entries and returning early in the case where it is NULL within the i40evf_close code path. Without this patch it is possible to trigger a kernel panic through NULL dereference. Change-ID: I92a2746e82533a889e25f91578eac9abd0388ae2 Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40evf: Move some i40evf_reset_task code to separate functionJoe Perches
The i40evf_reset_task function is a couple hundred lines and it has a separable block that disables VF. Move that block to a new i40evf_disable_vf function to shorten i40evf_reset_task a bit. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: fix panic on SPARC while changing num of descTushar Dave
On SPARC, writel() should not be used to write directly to memory address but only to memory mapped I/O address otherwise it causes data access exception. Commit 147e81ec75689 ("i40e: Test memory before ethtool alloc succeeds") introduced a code that uses memory address to fake the HW tail address and attempt to write to that address using writel() causes kernel panic on SPARC. The issue is reproduced while changing number of descriptors using ethtool. This change resolves the panic by using HW read-only memory mapped I/O register to fake HW tail address instead memory address. e.g. > ethtool -G eth2 tx 2048 rx 2048 i40e 0000:03:00.2 eth2: Changing Tx descriptor count from 512 to 2048. i40e 0000:03:00.2 eth2: Changing Rx descriptor count from 512 to 2048 sun4v_data_access_exception: ADDR[fff8001f9734a000] CTX[0000] TYPE[0004], going. \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ ethtool(3273): Dax [#1] CPU: 9 PID: 3273 Comm: ethtool Tainted: G E 4.8.0-linux-net_temp+ #7 task: fff8001f96d7a660 task.stack: fff8001f97348000 TSTATE: 0000009911001601 TPC: 00000000103189e4 TNPC: 00000000103189e8 Y: 00000000 Tainted: G E TPC: <i40e_alloc_rx_buffers+0x124/0x260 [i40e]> g0: fff8001f4eb64000 g1: 00000000000007ff g2: fff8001f9734b92c g3: 00203e0000000000 g4: fff8001f96d7a660 g5: fff8001fa6704000 g6: fff8001f97348000 g7: 0000000000000001 o0: 0006000046706928 o1: 00000000db3e2000 o2: fff8001f00000000 o3: 0000000000002000 o4: 0000000000002000 o5: 0000000000000001 sp: fff8001f9734afc1 ret_pc: 0000000010318a64 RPC: <i40e_alloc_rx_buffers+0x1a4/0x260 [i40e]> l0: fff8001f4e8bffe0 l1: fff8001f4e8cffe0 l2: 00000000000007ff l3: 00000000ff000000 l4: 0000000000ff0000 l5: 000000000000ff00 l6: 0000000000cda6a8 l7: 0000000000e822f0 i0: fff8001f96380000 i1: 0000000000000000 i2: 00203edb00000000 i3: 0006000046706928 i4: 0000000002086320 i5: 0000000000e82370 i6: fff8001f9734b071 i7: 00000000103062d4 I7: <i40e_set_ringparam+0x3b4/0x540 [i40e]> Call Trace: [00000000103062d4] i40e_set_ringparam+0x3b4/0x540 [i40e] [000000000094e2f8] dev_ethtool+0x898/0xbe0 [0000000000965570] dev_ioctl+0x250/0x300 [0000000000923800] sock_do_ioctl+0x40/0x60 [000000000092427c] sock_ioctl+0x7c/0x280 [00000000005ef040] vfs_ioctl+0x20/0x60 [00000000005ef5d4] do_vfs_ioctl+0x194/0x4c0 [00000000005ef974] SyS_ioctl+0x74/0xa0 [0000000000406214] linux_sparc_syscall+0x34/0x44 Disabling lock debugging due to kernel taint Caller[00000000103062d4]: i40e_set_ringparam+0x3b4/0x540 [i40e] Caller[000000000094e2f8]: dev_ethtool+0x898/0xbe0 Caller[0000000000965570]: dev_ioctl+0x250/0x300 Caller[0000000000923800]: sock_do_ioctl+0x40/0x60 Caller[000000000092427c]: sock_ioctl+0x7c/0x280 Caller[00000000005ef040]: vfs_ioctl+0x20/0x60 Caller[00000000005ef5d4]: do_vfs_ioctl+0x194/0x4c0 Caller[00000000005ef974]: SyS_ioctl+0x74/0xa0 Caller[0000000000406214]: linux_sparc_syscall+0x34/0x44 Caller[0000000000107154]: 0x107154 Instruction DUMP: e43620c8 e436204a c45e2038 <c2a083a0> 82102000 81cfe008 90086001 82102000 81cfe008 Kernel panic - not syncing: Fatal exception Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: Add protocols over MCTP to i40e_aq_discover_capabilitiesPiotr Raczynski
Add logical_id to I40E_AQ_CAP_ID_MNG_MODE capability starting from major version 2. Change-ID: Idb29214b172ea5c70cbd45a99e6745c0215af7e4 Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: fix trivial typo in naming of i40e_sync_filters_subtaskJacob Keller
A comment incorrectly referred to i40e_vsi_sync_filters_subtask which does not actually exist. Reference the correct function instead. Change-ID: I6bd805c605741ffb6fe34377259bb0d597edfafd Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: Add Clause22 implementationMichal Kosiarz
Some external PHYs require Clause22 method for accessing registers. This patch also adds some defines to support blink led on devices using 10CBaseT PHY. Change-ID: I868a4326911900f6c89e7e522fda4968b0825f14 Signed-off-by: Michal Kosiarz <michal.kosiarz@intel.com> Signed-off-by: Matt Jared <matthew.a.jared@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: avoid duplicate private flags definitionsJacob Keller
Separate the global private flags and the regular private flags per interface into two arrays. Future additions of private flags will not need to be duplicated which may lead to buggy code. Also rename "i40e_priv_flags_strings_gl" to "i40e_gl_priv_flags_strings" for clarity, as it reads more naturally. Change-ID: I68caef3c9954eb7da342d7f9d20f2873186f2758 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: remove second check of VLAN_N_VID in i40e_vlan_rx_add_vidJacob Keller
Replace a check of magic number 4095 with VLAN_N_VID. This makes it obvious that a later check against VLAN_N_VID is always true and can be removed. Change-ID: I28998f127a61a529480ce63d8a07e266f6c63b7b Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: remove error_param_int label from i40e_vc_config_promiscuous_mode_msgJacob Keller
This label is unnecessary, as are jumping to a block that checks aq_ret and then immediately skipping it and returning. So just jump straight to the error_param and remove this unnecessary label. Also use goto error_param even in the last check for style consistency. Change-ID: If487c7d10c4048e37c594e5eca167693aaed45f6 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40evf: Be much more verbose about what we can and cannot offloadAlexander Duyck
This change makes it so that we are much more robust about defining what we can and cannot offload. Previously we were performing no checks. This should bring us up to parity with the i40e PF driver. In addition the device only supports GSO as long as the MSS is 64 or greater. We were not checking this so an MSS less than that was resulting in Tx hangs. Change-ID: If533553ec92fc6ba694eab6ac81fdaf3004f3592 Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: Be much more verbose about what we can and cannot offloadAlexander Duyck
This change makes it so that we are much more robust about defining what we can and cannot offload. Previously we were just checking for the L4 tunnel header length, however there are other fields we should be verifying as there are multiple scenarios in which we cannot perform hardware offloads. In addition the device only supports GSO as long as the MSS is 64 or greater. We were not checking this so an MSS less than that was resulting in Tx hangs. Change-ID: I5e2fd5f3075c73601b4b36327b771c64fcb6c31b Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
2016-12-02Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "This should be the last set of bugfixes for arm-soc in v4.9. None of these are critical regressions, but it would be nice to still get them merged. - On the Juno platform, the idle latency was described wrong, leading to suboptimal cpuidle tuning. - Also on the same platform, PCI I/O space was set up incorrectly and could not work. - On the sti platform, a syntactically incorrect DT entry caused warnings. - The newly added 'gr8' platform has somewhat confusing file names, which we rename for consistency" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: juno: fix cluster sleep state entry latency on all SoC versions arm64: dts: juno: Correct PCI IO window ARM: dts: STiH407-family: fix i2c nodes ARM: gr8: Rename the DTSI and relevant DTS
2016-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Lots more phydev and probe error path leaks in various drivers by Johan Hovold. 2) Fix race in packet_set_ring(), from Philip Pettersson. 3) Use after free in dccp_invalid_packet(), from Eric Dumazet. 4) Signnedness overflow in SO_{SND,RCV}BUFFORCE, also from Eric Dumazet. 5) When tunneling between ipv4 and ipv6 we can be left with the wrong skb->protocol value as we enter the IPSEC engine and this causes all kinds of problems. Set it before the output path does any dst_output() calls, from Eli Cooper. 6) bcmgenet uses wrong device struct pointer in DMA API calls, fix from Florian Fainelli. 7) Various netfilter nat bug fixes from FLorian Westphal. 8) Fix memory leak in ipvlan_link_new(), from Gao Feng. 9) Locking fixes, particularly wrt. socket lookups, in l2tp from Guillaume Nault. 10) Avoid invoking rhash teardowns in atomic context by moving netlink cb->done() dump completion from a worker thread. Fix from Herbert Xu. 11) Buffer refcount problems in tun and macvtap on errors, from Jason Wang. 12) We don't set Kconfig symbol DEFAULT_TCP_CONG properly when the user selects BBR. Fix from Julian Wollrath. 13) Fix deadlock in transmit path on altera TSE driver, from Lino Sanfilippo. 14) Fix unbalanced reference counting in dsa_switch_tree, from Nikita Yushchenko. 15) tc_tunnel_key needs to be properly exported to userspace via uapi, fix from Roi Dayan. 16) rds_tcp_init_net() doesn't unregister notifier in error path, fix from Sowmini Varadhan. 17) Stale packet header pointer access after pskb_expand_head() in genenve driver, fix from Sabrina Dubroca. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits) net: avoid signed overflows for SO_{SND|RCV}BUFFORCE geneve: avoid use-after-free of skb->data tipc: check minimum bearer MTU net: renesas: ravb: unintialized return value sh_eth: remove unchecked interrupts for RZ/A1 net: bcmgenet: Utilize correct struct device for all DMA operations NET: usb: qmi_wwan: add support for Telit LE922A PID 0x1040 cdc_ether: Fix handling connection notification ip6_offload: check segs for NULL in ipv6_gso_segment. RDS: TCP: unregister_netdevice_notifier() in error path of rds_tcp_init_net Revert: "ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()" ipv6: Set skb->protocol properly for local output ipv4: Set skb->protocol properly for local output packet: fix race condition in packet_set_ring net: ethernet: altera: TSE: do not use tx queue lock in tx completion handler net: ethernet: altera: TSE: Remove unneeded dma sync for tx buffers net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks net: ethernet: stmmac: platform: fix outdated function header net: ethernet: stmmac: dwmac-meson8b: fix probe error path net: ethernet: stmmac: dwmac-generic: fix probe error path ...
2016-12-02net: avoid signed overflows for SO_{SND|RCV}BUFFORCEEric Dumazet
CAP_NET_ADMIN users should not be allowed to set negative sk_sndbuf or sk_rcvbuf values, as it can lead to various memory corruptions, crashes, OOM... Note that before commit 82981930125a ("net: cleanups in sock_setsockopt()"), the bug was even more serious, since SO_SNDBUF and SO_RCVBUF were vulnerable. This needs to be backported to all known linux kernels. Again, many thanks to syzkaller team for discovering this gem. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02geneve: avoid use-after-free of skb->dataSabrina Dubroca
geneve{,6}_build_skb can end up doing a pskb_expand_head(), which makes the ip_hdr(skb) reference we stashed earlier stale. Since it's only needed as an argument to ip_tunnel_ecn_encap(), move this directly in the function call. Fixes: 08399efc6319 ("geneve: ensure ECN info is handled properly in all tx/rx paths") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02tipc: check minimum bearer MTUMichal Kubeček
Qian Zhang (张谦) reported a potential socket buffer overflow in tipc_msg_build() which is also known as CVE-2016-8632: due to insufficient checks, a buffer overflow can occur if MTU is too short for even tipc headers. As anyone can set device MTU in a user/net namespace, this issue can be abused by a regular user. As agreed in the discussion on Ben Hutchings' original patch, we should check the MTU at the moment a bearer is attached rather than for each processed packet. We also need to repeat the check when bearer MTU is adjusted to new device MTU. UDP case also needs a check to avoid overflow when calculating bearer MTU. Fixes: b97bf3fd8f6a ("[TIPC] Initial merge") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reported-by: Qian Zhang (张谦) <zhangqian-c@360.cn> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02Merge tag 'linux-can-fixes-for-4.9-20161201' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-12-02 this is a pull request for net/master. There are two patches by Stephane Grosjean, who adds support for the new PCAN-USB X6 USB interface to the pcan_usb driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: renesas: ravb: unintialized return valueDan Carpenter
We want to set the other "err" variable here so that we can return it later. My version of GCC misses this issue but I caught it with a static checker. Fixes: 9f70eb339f52 ("net: ethernet: renesas: ravb: fix fixed-link phydev leaks") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02Merge tag 'wireless-drivers-next-for-davem-2016-12-01' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.10 Major changes: rsi * filter rx frames * configure tx power * make it possible to select antenna * support 802.11d brcmfmac * cleanup of scheduled scan code * support for bcm43341 chipset with different chip id * support rev6 of PCIe device interface ath10k * add spectral scan support for QCA6174 and QCA9377 families * show used tx bitrate with 10.4 firmware wil6210 * add power save mode support * add abort scan functionality * add support settings retry limit for short frames bcma * add Dell Inspiron 3148 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02sh_eth: remove unchecked interrupts for RZ/A1Chris Brandt
When streaming a lot of data and the RZ/A1 can't keep up, some status bits will get set that are not being checked or cleared which cause the following messages and the Ethernet driver to stop working. This patch fixes that issue. irq 21: nobody cared (try booting with the "irqpoll" option) handlers: [<c036b71c>] sh_eth_interrupt Disabling IRQ #21 Fixes: db893473d313a4ad ("sh_eth: Add support for r7s72100") Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: bcmgenet: Utilize correct struct device for all DMA operationsFlorian Fainelli
__bcmgenet_tx_reclaim() and bcmgenet_free_rx_buffers() are not using the same struct device during unmap that was used for the map operation, which makes DMA-API debugging warn about it. Fix this by always using &priv->pdev->dev throughout the driver, using an identical device reference for all map/unmap calls. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 19:11:21 +0000