summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-03-21sctp: out_qlen should be updated when pruning unsent queueXin Long
This patch is to fix the issue that sctp_prsctp_prune_sent forgot to update q->out_qlen when removing a chunk from unsent queue. Fixes: 8dbdf1f5b09c ("sctp: implement prsctp PRIO policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21sctp: define dst_pending_confirm as a bit in sctp_transportXin Long
As tp->dst_pending_confirm's value can only be set 0 or 1, this patch is to change to define it as a bit instead of __u32. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21sctp: remove temporary variable confirm from sctp_packet_transmitXin Long
Commit c86a773c7802 ("sctp: add dst_pending_confirm flag") introduced a temporary variable "confirm" in sctp_packet_transmit. But it broke the rule that longer lines should be above shorter ones. Besides, this variable is not necessary, so this patch is to just remove it and use tp->dst_pending_confirm directly. Fixes: c86a773c7802 ("sctp: add dst_pending_confirm flag") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21net: vrf: Reset rt6i_idev in local dst after putDavid Ahern
The VRF driver takes a reference to the inet6_dev on the VRF device for its rt6_local dst when handling local traffic through the VRF device as a loopback. When the device is deleted the driver does a put on the idev but does not reset rt6i_idev in the rt6_info struct. When the dst is destroyed, dst_destroy calls ip6_dst_destroy which does a second put for what is essentially the same reference causing it to be prematurely freed. Reset rt6i_idev after the put in the vrf driver. Fixes: b4869aa2f881e ("net: vrf: ipv6 support for local traffic to local addresses") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21bna: integer overflow bug in debugfsDan Carpenter
We could allocate less memory than intended because we do: bnad->regdata = kzalloc(len << 2, GFP_KERNEL); The shift can overflow leading to a crash. This is debugfs code so the impact is very small. Fixes: 7afc5dbde091 ("bna: Add debugfs interface.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Rasesh Mody <rasesh.mody@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21qmi_wwan: add Dell DW5811eBjørn Mork
This is a Dell branded Sierra Wireless EM7455. It is operating in MBIM mode by default, but can be configured to provide two QMI/RMNET functions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21sch_dsmark: fix invalid skb_cow() usageEric Dumazet
skb_cow(skb, sizeof(ip header)) is not very helpful in this context. First we need to use pskb_may_pull() to make sure the ip header is in skb linear part, then use skb_try_make_writable() to address clones issues. Fixes: 4c30719f4f55 ("[PKT_SCHED] dsmark: handle cloned and non-linear skb's") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21tun: fix inability to set offloads after disabling them via ethtoolYaroslav Isakov
Added missing logic in tun driver, which prevents apps to set offloads using tun ioctl, if offloads were previously disabled via ethtool Signed-off-by: Yaroslav Isakov <yaroslav.isakov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21net: unix: properly re-increment inflight counter of GC discarded candidatesAndrey Ulanov
Dmitry has reported that a BUG_ON() condition in unix_notinflight() may be triggered by a simple code that forwards unix socket in an SCM_RIGHTS message. That is caused by incorrect unix socket GC implementation in unix_gc(). The GC first collects list of candidates, then (a) decrements their "children's" inflight counter, (b) checks which inflight counters are now 0, and then (c) increments all inflight counters back. (a) and (c) are done by calling scan_children() with inc_inflight or dec_inflight as the second argument. Commit 6209344f5a37 ("net: unix: fix inflight counting bug in garbage collector") changed scan_children() such that it no longer considers sockets that do not have UNIX_GC_CANDIDATE flag. It also added a block of code that that unsets this flag _before_ invoking scan_children(, dec_iflight, ). This may lead to incorrect inflight counters for some sockets. This change fixes this bug by changing order of operations: UNIX_GC_CANDIDATE is now unset only after all inflight counters are restored to the original state. kernel BUG at net/unix/garbage.c:149! RIP: 0010:[<ffffffff8717ebf4>] [<ffffffff8717ebf4>] unix_notinflight+0x3b4/0x490 net/unix/garbage.c:149 Call Trace: [<ffffffff8716cfbf>] unix_detach_fds.isra.19+0xff/0x170 net/unix/af_unix.c:1487 [<ffffffff8716f6a9>] unix_destruct_scm+0xf9/0x210 net/unix/af_unix.c:1496 [<ffffffff86a90a01>] skb_release_head_state+0x101/0x200 net/core/skbuff.c:655 [<ffffffff86a9808a>] skb_release_all+0x1a/0x60 net/core/skbuff.c:668 [<ffffffff86a980ea>] __kfree_skb+0x1a/0x30 net/core/skbuff.c:684 [<ffffffff86a98284>] kfree_skb+0x184/0x570 net/core/skbuff.c:705 [<ffffffff871789d5>] unix_release_sock+0x5b5/0xbd0 net/unix/af_unix.c:559 [<ffffffff87179039>] unix_release+0x49/0x90 net/unix/af_unix.c:836 [<ffffffff86a694b2>] sock_release+0x92/0x1f0 net/socket.c:570 [<ffffffff86a6962b>] sock_close+0x1b/0x20 net/socket.c:1017 [<ffffffff81a76b8e>] __fput+0x34e/0x910 fs/file_table.c:208 [<ffffffff81a771da>] ____fput+0x1a/0x20 fs/file_table.c:244 [<ffffffff81483ab0>] task_work_run+0x1a0/0x280 kernel/task_work.c:116 [< inline >] exit_task_work include/linux/task_work.h:21 [<ffffffff8141287a>] do_exit+0x183a/0x2640 kernel/exit.c:828 [<ffffffff8141383e>] do_group_exit+0x14e/0x420 kernel/exit.c:931 [<ffffffff814429d3>] get_signal+0x663/0x1880 kernel/signal.c:2307 [<ffffffff81239b45>] do_signal+0xc5/0x2190 arch/x86/kernel/signal.c:807 [<ffffffff8100666a>] exit_to_usermode_loop+0x1ea/0x2d0 arch/x86/entry/common.c:156 [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [<ffffffff81009693>] syscall_return_slowpath+0x4d3/0x570 arch/x86/entry/common.c:259 [<ffffffff881478e6>] entry_SYSCALL_64_fastpath+0xc4/0xc6 Link: https://lkml.org/lkml/2017/3/6/252 Signed-off-by: Andrey Ulanov <andreyu@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 6209344 ("net: unix: fix inflight counting bug in garbage collector") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21Merge branch 'vsock-pkt-cancel'David S. Miller
Peng Tao says: ==================== vsock: cancel connect packets when failing to connect Currently, if a connect call fails on a signal or timeout (e.g., guest is still in the process of starting up), we'll just return to caller and leave the connect packet queued and they are sent even though the connection is considered a failure, which can confuse applications with unwanted false connect attempt. The patchset enables vsock (both host and guest) to cancel queued packets when a connect attempt is considered to fail. v5 changelog: - change virtio_vsock_pkt->cancel_token back to virtio_vsock_pkt->vsk v4 changelog: - drop two unnecessary void * cast - update new callback comment v3 changelog: - define cancel_pkt callback in struct vsock_transport rather than struct virtio_transport - rename virtio_vsock_pkt->vsk to virtio_vsock_pkt->cancel_token v2 changelog: - fix queued_replies counting and resume tx/rx when necessary ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21vsock: cancel packets when failing to connectPeng Tao
Otherwise we'll leave the packets queued until releasing vsock device. E.g., if guest is slow to start up, resulting ETIMEDOUT on connect, guest will get the connect requests from failed host sockets. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21vsock: add pkt cancel capabilityPeng Tao
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21vhost-vsock: add pkt cancel capabilityPeng Tao
To allow canceling all packets of a connection. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21vsock: track pkt owner vsockPeng Tao
So that we can cancel a queued pkt later if necessary. Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21crypto: deadlock between crypto_alg_sem/rtnl_mutex/genl_mutexHerbert Xu
On Tue, Mar 14, 2017 at 10:44:10AM +0100, Dmitry Vyukov wrote: > > Yes, please. > Disregarding some reports is not a good way long term. Please try this patch. ---8<--- Subject: netlink: Annotate nlk cb_mutex by protocol Currently all occurences of nlk->cb_mutex are annotated by lockdep as a single class. This causes a false lcokdep cycle involving genl and crypto_user. This patch fixes it by dividing cb_mutex into individual classes based on the netlink protocol. As genl and crypto_user do not use the same netlink protocol this breaks the false dependency loop. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21r8152: fix the list rx_done may be used without initializationhayeswang
The list rx_done would be initialized when the linking on occurs. Therefore, if a napi is scheduled without any linking on before, the following kernel panic would happen. BUG: unable to handle kernel NULL pointer dereference at 000000000000008 IP: [<ffffffffc085efde>] r8152_poll+0xe1e/0x1210 [r8152] PGD 0 Oops: 0002 [#1] SMP Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21mm, swap: Remove WARN_ON_ONCE() in free_swap_slot()Huang Ying
Before commit 452b94b8c8c7 ("mm/swap: don't BUG_ON() due to uninitialized swap slot cache"), the following bug is reported, ------------[ cut here ]------------ kernel BUG at mm/swap_slots.c:270! invalid opcode: 0000 [#1] SMP CPU: 5 PID: 1745 Comm: (sd-pam) Not tainted 4.11.0-rc1-00243-g24c534bb161b #1 Hardware name: System manufacturer System Product Name/Z170-K, BIOS 1803 05/06/2016 RIP: 0010:free_swap_slot+0xba/0xd0 Call Trace: swap_free+0x36/0x40 do_swap_page+0x360/0x6d0 __handle_mm_fault+0x880/0x1080 handle_mm_fault+0xd0/0x240 __do_page_fault+0x232/0x4d0 do_page_fault+0x20/0x70 page_fault+0x22/0x30 ---[ end trace aefc9ede53e0ab21 ]--- This is raised by the BUG_ON(!swap_slot_cache_initialized) in free_swap_slot(). This is incorrect, because even if the swap slots cache fails to be initialized, the swap should operate properly without the swap slots cache. And the use_swap_slot_cache check later in the function will protect the uninitialized swap slots cache case. In commit 452b94b8c8c7, the BUG_ON() is replaced by WARN_ON_ONCE(). In the patch, the WARN_ON_ONCE() is removed too. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-21Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Nine small fixes: the biggest is probably finally sorting out Kconfig issues with lpfc nvme. There are some performance fixes for megaraid and hpsa and a static checker fix" [ Johannes Thumshirn points out that there still seems to be more lpfc vs nvme config issues. Oh well. - Linus ] * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Finalize Kconfig options for nvme scsi: ufs: don't check unsigned type for a negative value scsi: hpsa: do not timeout reset operations scsi: hpsa: limit outstanding rescans scsi: hpsa: update check for logical volume status scsi: megaraid_sas: Driver version upgrade scsi: megaraid_sas: raid6 also require cpuSel check same as raid5 scsi: megaraid_sas: add correct return type check for ldio hint logic for raid1 scsi: megaraid_sas: enable intx only if msix request fails
2017-03-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - regression fixes for Wacom devices, from Aaron Armstrong Skomra and Ping Cheng - memory leak in hid-sony driver from Roderick Colenbrander - new device IDs support from Oscar Campos and Daniel Drake * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wacom: generic: Wacom mouse is only provided for opaque tablets HID: corsair: Add driver Scimitar Pro RGB gaming mouse 1b1c:1b3e support to hid-corsair HID: corsair: support for K65-K70 Rapidfire and Scimitar Pro RGB HID: wacom: don't manually release resources for the EKR HID: wacom: Correct Intuos Pro 2 resolution HID: sony: Fix input device leak when connecting a DS4 twice using USB/BT HID: chicony: Add support for another ASUS Zen AiO keyboard
2017-03-21Merge tag 'gpio-v4.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here is the first set of GPIO fixes for 4.11. It was delayed a bit beacuse I was chicken when linux-next was not rotating last week. This hits the ST serial driver in drivers/tty/serial and that has an ACK from Greg, he suggested to keep the old GPIO fwnode API around to smoothen things in the merge Windod and those have now served their purpose so we take them out and convert the last driver to the new API. Apart from that it's fixes as usual. Summary: - set the parent on the Altera A10SR driver, also fix high level IRQs. - fix error path on the mockup driver. - compilation noise about unused functions fixed. - fix missed interrupts on the MCP23S08 expander, this is also tagged for stable. - retire the interrim helpers devm_get_gpiod_from_child() used to smoothen merging in the merge window" * tag 'gpio-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio:mcp23s08 Fixed missing interrupts serial: st-asc: Use new GPIOD API to obtain RTS pin gpio: altera: Use handle_level_irq when configured as a level_high gpio: xgene: mark PM functions as __maybe_unused gpio: mockup: return -EFAULT if copy_from_user() fails gpio: altera-a10sr: Set gpio_chip parent property
2017-03-21Merge tag 'rproc-v4.11-fixes' of git://github.com/andersson/remoteprocLinus Torvalds
Pull remoteproc fix from Bjorn Andersson: "This fixes a Kbuild dependency issue related to the Qualcomm remoteproc drivers" * tag 'rproc-v4.11-fixes' of git://github.com/andersson/remoteproc: remoteproc: qcom: fix QCOM_SMD dependencies
2017-03-21Merge tag 'for-f2fs-4.11-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs fixes from Jaegeuk Kim: - fix performance regression reported by lkp-rebot - fix potential data lost after power-cut due to SSR reallocation * tag 'for-f2fs-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: combine nat_bits and free_nid_bitmap cache f2fs: skip scanning free nid bitmap of full NAT blocks f2fs: use __set{__clear}_bit_le f2fs: declare static functions f2fs: don't overwrite node block by SSR
2017-03-21HID: wacom: generic: Wacom mouse is only provided for opaque tabletsPing Cheng
Commit f85c9dc ("Support tool ID and additional tool types") introduced mouse and lens cursor tools to generic codepath, which covers both display (direct) and opaque tablets (indirect devices). However, mouse and lens cursor tools are only provided for opaque tablets. This patch ignores mouse and lens cursor tools if the device is a display tablet. Signed-off-by: Ping Cheng <ping.cheng@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-03-21HID: corsair: Add driver Scimitar Pro RGB gaming mouse 1b1c:1b3e support to ↵Oscar Campos
hid-corsair This mouse sold by Corsair as Scimitar PRO RGB defines two consecutive Logical Minimum items in its Application (Consumer.0001) report making it non parseable. This patch fixes the report descriptor overriding byte 77 in rdesc from 0x16 (Logical Minimum with 16 bits value) to 0x26 (Logical Maximum with 16 bits value). Signed-off-by: Oscar Campos <oscar.campos@member.fsf.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-03-21HID: corsair: support for K65-K70 Rapidfire and Scimitar Pro RGBOscar Campos
Add quirks for several corsair gaming devices to avoid long delays on report initialization Supported devices: - Corsair K65RGB Rapidfire Gaming Keyboard - Corsair K70RGB Rapidfire Gaming Keyboard - Corsair Scimitar Pro RGB Gaming Mouse Signed-off-by: Oscar Campos <oscar.campos@member.fsf.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-03-21HID: wacom: don't manually release resources for the EKRAaron Armstrong Skomra
Commit 5b779fc introduces the manual release of resources in wacom_remove() as an addition to the driver's use of devm. The EKR resources can only be released through wacom_remote_destroy_one() so we skip the manual release for it. Fixes: 5b779fc ("HID: wacom: release the resources before leaving despite devm") Signed-off-by: Aaron Armstrong Skomra <skomra@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-03-21HID: wacom: Correct Intuos Pro 2 resolutionAaron Armstrong Skomra
The features struct for the second gen Intuos Pro uses the wrong constant for the resolution. This fix is for commit 4922cd2. Fixes: 4922cd2 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface") Signed-off-by: Aaron Armstrong Skomra <skomra@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-03-21ALSA: seq: Fix racy cell insertions during snd_seq_pool_done()Takashi Iwai
When snd_seq_pool_done() is called, it marks the closing flag to refuse the further cell insertions. But snd_seq_pool_done() itself doesn't clear the cells but just waits until all cells are cleared by the caller side. That is, it's racy, and this leads to the endless stall as syzkaller spotted. This patch addresses the racy by splitting the setup of pool->closing flag out of snd_seq_pool_done(), and calling it properly before snd_seq_pool_done(). BugLink: http://lkml.kernel.org/r/CACT4Y+aqqy8bZA1fFieifNxR2fAfFQQABcBHj801+u5ePV0URw@mail.gmail.com Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-21ALSA: x86: Make CONFIG_SND_X86 boolTakashi Iwai
CONFIG_SND_X86 is a menu config to filter only for x86-specific drivers in its sub-menu, and this doesn't have to be tristate but rather it should be a bool. Also, like other sub-menu configs, it's more user-friendly to be default=y; it's merely a menu config and the actual drivers are configured in the sub-menu, after all. Fixes: 287599cf2d77 ("ALSA: add Intel HDMI LPE audio driver for BYT/CHT-T") Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-20remoteproc: qcom: fix QCOM_SMD dependenciesArnd Bergmann
qcom_smd_register_edge() is provided by either QCOM_SMD or RPMSG_QCOM_SMD, and if both of them are disabled, it does nothing. The check for the PIL drivers however only checks for QCOM_SMD, so it breaks with QCOM_SMD=n && RPMSG_QCOM_SMD=m: drivers/remoteproc/built-in.o: In function `smd_subdev_remove': qcom_wcnss_iris.c:(.text+0x231c): undefined reference to `qcom_smd_unregister_edge' drivers/remoteproc/built-in.o: In function `smd_subdev_probe': qcom_wcnss_iris.c:(.text+0x2344): undefined reference to `qcom_smd_register_edge' drivers/remoteproc/built-in.o: In function `smd_subdev_probe': qcom_q6v5_pil.c:(.text+0x3538): undefined reference to `qcom_smd_register_edge' qcom_q6v5_pil.c:(.text+0x3538): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `qcom_smd_register_edge' This clarifies the Kconfig dependency. Fixes: 4b48921a8f74 ("remoteproc: qcom: Use common SMD edge handler") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-03-20ath10k: fix incorrect wlan_mac_base in qca6174_regsRyan Hsu
In the 'commit ebee76f7fa46 ("ath10k: allow setting coverage class")', it inherits the design and the address offset from ath9k, but the address is not applicable to QCA6174, which leads to a random crash while doing the resume() operation, since the set_coverage_class.ops will be called from ieee80211_reconfig() when resume() (if the wow is not configured). Fix the incorrect address offset here to avoid the random crash. Verified on QCA6174/hw3.0 with firmware WLAN.RM.4.4-00022-QCARMSWPZ-2. kvalo: this also seems to fix a regression with firmware restart. Fixes: ebee76f7fa46 ("ath10k: allow setting coverage class") Cc: <stable@vger.kernel.org> # v4.10 Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-20f2fs: combine nat_bits and free_nid_bitmap cacheChao Yu
Both nat_bits cache and free_nid_bitmap cache provide same functionality as a intermediate cache between free nid cache and disk, but with different granularity of indicating free nid range, and different persistence policy. nat_bits cache provides better persistence ability, and free_nid_bitmap provides better granularity. In this patch we combine advantage of both caches, so finally policy of the intermediate cache would be: - init: load free nid status from nat_bits into free_nid_bitmap - lookup: scan free_nid_bitmap before load NAT blocks - update: update free_nid_bitmap in real-time - persistence: udpate and persist nat_bits in checkpoint This patch also resolves performance regression reported by lkp-robot. commit: 4ac912427c4214d8031d9ad6fbc3bc75e71512df ("f2fs: introduce free nid bitmap") d00030cf9cd0bb96fdccc41e33d3c91dcbb672ba ("f2fs: use __set{__clear}_bit_le") 1382c0f3f9d3f936c8bc42ed1591cf7a593ef9f7 ("f2fs: combine nat_bits and free_nid_bitmap cache") 4ac912427c4214d8 d00030cf9cd0bb96fdccc41e33 1382c0f3f9d3f936c8bc42ed15 ---------------- -------------------------- -------------------------- %stddev %change %stddev %change %stddev \ | \ | \ 77863 ± 0% +2.1% 79485 ± 1% +50.8% 117404 ± 0% aim7.jobs-per-min 231.63 ± 0% -2.0% 227.01 ± 1% -33.6% 153.80 ± 0% aim7.time.elapsed_time 231.63 ± 0% -2.0% 227.01 ± 1% -33.6% 153.80 ± 0% aim7.time.elapsed_time.max 896604 ± 0% -0.8% 889221 ± 3% -20.2% 715260 ± 1% aim7.time.involuntary_context_switches 2394 ± 1% +4.6% 2503 ± 1% +3.7% 2481 ± 2% aim7.time.maximum_resident_set_size 6240 ± 0% -1.5% 6145 ± 1% -14.1% 5360 ± 1% aim7.time.system_time 1111357 ± 3% +1.9% 1132509 ± 2% -6.2% 1041932 ± 2% aim7.time.voluntary_context_switches ... Signed-off-by: Chao Yu <yuchao0@huawei.com> Tested-by: Xiaolong Ye <xiaolong.ye@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-03-20f2fs: skip scanning free nid bitmap of full NAT blocksChao Yu
This patch adds to account free nids for each NAT blocks, and while scanning all free nid bitmap, do check count and skip lookuping in full NAT block. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-03-20f2fs: use __set{__clear}_bit_leJaegeuk Kim
This patch uses __set{__clear}_bit_le for highter speed. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-03-20f2fs: declare static functionsJaegeuk Kim
This is to avoid build warning reported by kbuild test robot. Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-03-20f2fs: don't overwrite node block by SSRJaegeuk Kim
This patch fixes that SSR can overwrite previous warm node block consisting of a node chain since the last checkpoint. Fixes: 5b6c6be2d878 ("f2fs: use SSR for warm node as well") Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-03-20ALSA: hda - add support for docking station for HP 840 G3Jaroslav Kysela
This tested patch adds missing initialization for Line-In/Out PINs for the docking station for HP 840 G3. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-20ALSA: hda - add support for docking station for HP 820 G2Jaroslav Kysela
This tested patch adds missing initialization for Line-In/Out PINs for the docking station for HP 820 G2. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-20ALSA: ctxfi: Fix the incorrect check of dma_set_mask() callTakashi Iwai
In the commit [15c75b09f8d1: ALSA: ctxfi: Fallback DMA mask to 32bit], I forgot to put "!" at dam_set_mask() call check in cthw20k1.c (while cthw20k2.c is OK). This patch fixes that obvious bug. (As a side note: although the original commit was completely wrong, it's still working for most of machines, as it sets to 32bit DMA mask in the end. So the bug severity is low.) Fixes: 15c75b09f8d1 ("ALSA: ctxfi: Fallback DMA mask to 32bit") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-19Linux 4.11-rc3Linus Torvalds
2017-03-19mm/swap: don't BUG_ON() due to uninitialized swap slot cacheLinus Torvalds
This BUG_ON() triggered for me once at shutdown, and I don't see a reason for the check. The code correctly checks whether the swap slot cache is usable or not, so an uninitialized swap slot cache is not actually problematic afaik. I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since I'm not sure why that seemingly pointless check was there. I suspect the real fix is to just remove it entirely, but for now we'll warn about it but not bring the machine down. Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-19Merge tag 'powerpc-4.11-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc fixes from Michael Ellerman: "A couple of minor powerpc fixes for 4.11: - wire up statx() syscall - don't print a warning on memory hotplug when HPT resizing isn't available Thanks to: David Gibson, Chandan Rajendra" * tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Don't give a warning when HPT resizing isn't available powerpc: Wire up statx() syscall
2017-03-19Merge branch 'parisc-4.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: - Mikulas Patocka added support for R_PARISC_SECREL32 relocations in modules with CONFIG_MODVERSIONS. - Dave Anglin optimized the cache flushing for vmap ranges. - Arvind Yadav provided a fix for a potential NULL pointer dereference in the parisc perf code (and some code cleanups). - I wired up the new statx system call, fixed some compiler warnings with the access_ok() macro and fixed shutdown code to really halt a system at shutdown instead of crashing & rebooting. * 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix system shutdown halt parisc: perf: Fix potential NULL pointer dereference parisc: Avoid compiler warnings with access_ok() parisc: Wire up statx system call parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range parisc: support R_PARISC_SECREL32 relocation in modules
2017-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "The bulk of the changes are in qla2xxx target driver code to address various issues found during Cavium/QLogic's internal testing (stable CC's included), along with a few other stability and smaller miscellaneous improvements. There are also a couple of different patch sets from Mike Christie, which have been a result of his work to use target-core ALUA logic together with tcm-user backend driver. Finally, a patch to address some long standing issues with pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices, which will make folks using physical (or virtual) magnetic tape happy" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits) qla2xxx: Update driver version to 9.00.00.00-k qla2xxx: Fix delayed response to command for loop mode/direct connect. qla2xxx: Change scsi host lookup method. qla2xxx: Add DebugFS node to display Port Database qla2xxx: Use IOCB interface to submit non-critical MBX. qla2xxx: Add async new target notification qla2xxx: Export DIF stats via debugfs qla2xxx: Improve T10-DIF/PI handling in driver. qla2xxx: Allow relogin to proceed if remote login did not finish qla2xxx: Fix sess_lock & hardware_lock lock order problem. qla2xxx: Fix inadequate lock protection for ABTS. qla2xxx: Fix request queue corruption. qla2xxx: Fix memory leak for abts processing qla2xxx: Allow vref count to timeout on vport delete. tcmu: Convert cmd_time_out into backend device attribute tcmu: make cmd timeout configurable tcmu: add helper to check if dev was configured target: fix race during implicit transition work flushes target: allow userspace to set state to transitioning target: fix ALUA transition timeout handling ...
2017-03-19Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull device-dax fixes from Dan Williams: "The device-dax driver was not being careful to handle falling back to smaller fault-granularity sizes. The driver already fails fault attempts that are smaller than the device's alignment, but it also needs to handle the cases where a larger page mapping could be established. For simplicity of the immediate fix the implementation just signals VM_FAULT_FALLBACK until fault-size == device-alignment. One fix is for -stable to address pmd-to-pte fallback from the original implementation, another fix is for the new (introduced in 4.11-rc1) pud-to-pmd regression, and a typo fix comes along for the ride. These have received a build success notification from the kbuild robot" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix debug output typo device-dax: fix pud fault fallback handling device-dax: fix pmd/pte fault fallback handling
2017-03-18qla2xxx: Update driver version to 9.00.00.00-kHimanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix delayed response to command for loop mode/direct connect.Quinn Tran
Current driver wait for FW to be in the ready state before processing in-coming commands. For Arbitrated Loop or Point-to- Point (not switch), FW Ready state can take a while. FW will transition to ready state after all Nports have been logged in. In the mean time, certain initiators have completed the login and starts IO. Driver needs to start processing all queues if FW is already started. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Change scsi host lookup method.Quinn Tran
For target mode, when new scsi command arrive, driver first performs a look up of the SCSI Host. The current look up method is based on the ALPA portion of the NPort ID. For Cisco switch, the ALPA can not be used as the index. Instead, the new search method is based on the full value of the Nport_ID via btree lib. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Add DebugFS node to display Port DatabaseHimanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Use IOCB interface to submit non-critical MBX.Quinn Tran
The Mailbox interface is currently over subscribed. We like to reserve the Mailbox interface for the chip managment and link initialization. Any non essential Mailbox command will be routed through the IOCB interface. The IOCB interface is able to absorb more commands. Following commands are being routed through IOCB interface - Get ID List (007Ch) - Get Port DB (0064h) - Get Link Priv Stats (006Dh) Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 20:10:05 +0000