summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-25net: Add __icmp_send helper.Nazarov Sergey
Add __icmp_send function having ip_options struct parameter Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru> Reviewed-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25tun: remove unnecessary memory barrierTimur Celik
Replace set_current_state with __set_current_state since no memory barrier is needed at this point. Signed-off-by: Timur Celik <mail@timurcelik.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25net: socket: set sock->sk to NULL after calling proto_ops::release()Eric Biggers
Commit 9060cb719e61 ("net: crypto set sk to NULL when af_alg_release.") fixed a use-after-free in sockfs_setattr() when an AF_ALG socket is closed concurrently with fchownat(). However, it ignored that many other proto_ops::release() methods don't set sock->sk to NULL and therefore allow the same use-after-free: - base_sock_release - bnep_sock_release - cmtp_sock_release - data_sock_release - dn_release - hci_sock_release - hidp_sock_release - iucv_sock_release - l2cap_sock_release - llcp_sock_release - llc_ui_release - rawsock_release - rfcomm_sock_release - sco_sock_release - svc_release - vcc_release - x25_release Rather than fixing all these and relying on every socket type to get this right forever, just make __sock_release() set sock->sk to NULL itself after calling proto_ops::release(). Reproducer that produces the KASAN splat when any of these socket types are configured into the kernel: #include <pthread.h> #include <stdlib.h> #include <sys/socket.h> #include <unistd.h> pthread_t t; volatile int fd; void *close_thread(void *arg) { for (;;) { usleep(rand() % 100); close(fd); } } int main() { pthread_create(&t, NULL, close_thread, NULL); for (;;) { fd = socket(rand() % 50, rand() % 11, 0); fchownat(fd, "", 1000, 1000, 0x1000); close(fd); } } Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.") Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25net: sched: act_tunnel_key: fix NULL pointer dereference during initVlad Buslov
Metadata pointer is only initialized for action TCA_TUNNEL_KEY_ACT_SET, but it is unconditionally dereferenced in tunnel_key_init() error handler. Verify that metadata pointer is not NULL before dereferencing it in tunnel_key_init error handling code. Fixes: ee28bb56ac5b ("net/sched: fix memory leak in act_tunnel_key_init()") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25net: dsa: fix a leaked reference by adding missing of_node_putWen Yang
The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./net/dsa/port.c:294:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 284, but without a corresponding object release within this function. ./net/dsa/dsa2.c:627:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function. ./net/dsa/dsa2.c:630:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function. ./net/dsa/dsa2.c:636:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function. ./net/dsa/dsa2.c:639:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24tun: fix blocking readTimur Celik
This patch moves setting of the current state into the loop. Otherwise the task may end up in a busy wait loop if none of the break conditions are met. Signed-off-by: Timur Celik <mail@timurcelik.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24net: dsa: lantiq: Add GPHY firmware filesHauke Mehrtens
This adds the file names of the FW files which this driver handles into the module description. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24net/sched: act_skbedit: fix refcount leak when replace failsDavide Caratti
when act_skbedit was converted to use RCU in the data plane, we added an error path, but we forgot to drop the action refcount in case of failure during a 'replace' operation: # tc actions add action skbedit ptype otherhost pass index 100 # tc action show action skbedit total acts 1 action order 0: skbedit ptype otherhost pass index 100 ref 1 bind 0 # tc actions replace action skbedit ptype otherhost drop index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc action show action skbedit total acts 1 action order 0: skbedit ptype otherhost pass index 100 ref 2 bind 0 Ensure we call tcf_idr_release(), in case 'params_new' allocation failed, also when the action is being replaced. Fixes: c749cdda9089 ("net/sched: act_skbedit: don't use spinlock in the data path") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24net/sched: act_ipt: fix refcount leak when replace failsDavide Caratti
After commit 4e8ddd7f1758 ("net: sched: don't release reference on action overwrite"), the error path of all actions was converted to drop refcount also when the action was being overwritten. But we forgot act_ipt_init(), in case allocation of 'tname' was not successful: # tc action add action xt -j LOG --log-prefix hello index 100 tablename: mangle hook: NF_IP_POST_ROUTING target: LOG level warning prefix "hello" index 100 # tc action show action xt total acts 1 action order 0: tablename: mangle hook: NF_IP_POST_ROUTING target LOG level warning prefix "hello" index 100 ref 1 bind 0 # tc action replace action xt -j LOG --log-prefix world index 100 tablename: mangle hook: NF_IP_POST_ROUTING target: LOG level warning prefix "world" index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc action show action xt total acts 1 action order 0: tablename: mangle hook: NF_IP_POST_ROUTING target LOG level warning prefix "hello" index 100 ref 2 bind 0 Ensure we call tcf_idr_release(), in case 'tname' allocation failed, also when the action is being replaced. Fixes: 4e8ddd7f1758 ("net: sched: don't release reference on action overwrite") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "Bug fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: record maximum physical address width in kvm_mmu_extended_role kvm: x86: Return LA57 feature based on hardware capability x86/kvm/mmu: fix switch between root and guest MMUs s390: vsie: Use effective CRYCBD.31 to check CRYCBD validity
2019-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Hopefully the last pull request for this release. Fingers crossed: 1) Only refcount ESP stats on full sockets, from Martin Willi. 2) Missing barriers in AF_UNIX, from Al Viro. 3) RCU protection fixes in ipv6 route code, from Paolo Abeni. 4) Avoid false positives in untrusted GSO validation, from Willem de Bruijn. 5) Forwarded mesh packets in mac80211 need more tailroom allocated, from Felix Fietkau. 6) Use operstate consistently for linkup in team driver, from George Wilkie. 7) ThunderX bug fixes from Vadim Lomovtsev. Mostly races between VF and PF code paths. 8) Purge ipv6 exceptions during netdevice removal, from Paolo Abeni. 9) nfp eBPF code gen fixes from Jiong Wang. 10) bnxt_en firmware timeout fix from Michael Chan. 11) Use after free in udp/udpv6 error handlers, from Paolo Abeni. 12) Fix a race in x25_bind triggerable by syzbot, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) net: phy: realtek: Dummy IRQ calls for RTL8366RB tcp: repaired skbs must init their tso_segs net/x25: fix a race in x25_bind() net: dsa: Remove documentation for port_fdb_prepare Revert "bridge: do not add port to router list when receives query with source 0.0.0.0" selftests: fib_tests: sleep after changing carrier. again. net: set static variable an initial value in atl2_probe() net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10G bpf, doc: add bpf list as secondary entry to maintainers file udp: fix possible user after free in error handler udpv6: fix possible user after free in error handler fou6: fix proto error handler argument type udpv6: add the required annotation to mib type mdio_bus: Fix use-after-free on device_register fails net: Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255 bnxt_en: Wait longer for the firmware message response to complete. bnxt_en: Fix typo in firmware message timeout logic. nfp: bpf: fix ALU32 high bits clearance bug nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_K Documentation: networking: switchdev: Update port parent ID section ...
2019-02-23net: phy: realtek: Dummy IRQ calls for RTL8366RBLinus Walleij
This fixes a regression introduced by commit 0d2e778e38e0ddffab4bb2b0e9ed2ad5165c4bf7 "net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt". This assumes that a PHY cannot trigger interrupt unless it has .config_intr() or .ack_interrupt() implemented. A later patch makes the code assume both need to be implemented for interrupts to be present. But this PHY (which is inside a DSA) will happily fire interrupts without either callback. Implement dummy callbacks for .config_intr() and .ack_interrupt() in the phy header to fix this. Tested on the RTL8366RB on D-Link DIR-685. Fixes: 0d2e778e38e0 ("net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt") Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23tcp: repaired skbs must init their tso_segsEric Dumazet
syzbot reported a WARN_ON(!tcp_skb_pcount(skb)) in tcp_send_loss_probe() [1] This was caused by TCP_REPAIR sent skbs that inadvertenly were missing a call to tcp_init_tso_segs() [1] WARNING: CPU: 1 PID: 0 at net/ipv4/tcp_output.c:2534 tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc7+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x45 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] fixup_bug arch/x86/kernel/traps.c:173 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534 Code: 88 fc ff ff 4c 89 ef e8 ed 75 c8 fb e9 c8 fc ff ff e8 43 76 c8 fb e9 63 fd ff ff e8 d9 75 c8 fb e9 94 f9 ff ff e8 bf 03 91 fb <0f> 0b e9 7d fa ff ff e8 b3 03 91 fb 0f b6 1d 37 43 7a 03 31 ff 89 RSP: 0018:ffff8880ae907c60 EFLAGS: 00010206 RAX: ffff8880a989c340 RBX: 0000000000000000 RCX: ffffffff85dedbdb RDX: 0000000000000100 RSI: ffffffff85dee0b1 RDI: 0000000000000005 RBP: ffff8880ae907c90 R08: ffff8880a989c340 R09: ffffed10147d1ae1 R10: ffffed10147d1ae0 R11: ffff8880a3e8d703 R12: ffff888091b90040 R13: ffff8880a3e8d540 R14: 0000000000008000 R15: ffff888091b90860 tcp_write_timer_handler+0x5c0/0x8a0 net/ipv4/tcp_timer.c:583 tcp_write_timer+0x10e/0x1d0 net/ipv4/tcp_timer.c:607 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 arch/x86/include/asm/irqflags.h:58 Code: ff ff ff 48 89 c7 48 89 45 d8 e8 59 0c a1 fa 48 8b 45 d8 e9 ce fe ff ff 48 89 df e8 48 0c a1 fa eb 82 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90 RSP: 0018:ffff8880a98afd78 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffffffff1125061 RBX: ffff8880a989c340 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000001 RDI: ffff8880a989cbbc RBP: ffff8880a98afda8 R08: ffff8880a989c340 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 R13: ffffffff889282f8 R14: 0000000000000001 R15: 0000000000000000 arch_cpu_idle+0x10/0x20 arch/x86/kernel/process.c:555 default_idle_call+0x36/0x90 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x386/0x570 kernel/sched/idle.c:262 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:353 start_secondary+0x404/0x5c0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 79861919b889 ("tcp: fix TCP_REPAIR xmit queue setup") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net/x25: fix a race in x25_bind()Eric Dumazet
syzbot was able to trigger another soft lockup [1] I first thought it was the O(N^2) issue I mentioned in my prior fix (f657d22ee1f "net/x25: do not hold the cpu too long in x25_new_lci()"), but I eventually found that x25_bind() was not checking SOCK_ZAPPED state under socket lock protection. This means that multiple threads can end up calling x25_insert_socket() for the same socket, and corrupt x25_list [1] watchdog: BUG: soft lockup - CPU#0 stuck for 123s! [syz-executor.2:10492] Modules linked in: irq event stamp: 27515 hardirqs last enabled at (27514): [<ffffffff81006673>] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (27515): [<ffffffff8100668f>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (32): [<ffffffff8632ee73>] x25_get_neigh+0xa3/0xd0 net/x25/x25_link.c:336 softirqs last disabled at (34): [<ffffffff86324bc3>] x25_find_socket+0x23/0x140 net/x25/af_x25.c:341 CPU: 0 PID: 10492 Comm: syz-executor.2 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__sanitizer_cov_trace_pc+0x4/0x50 kernel/kcov.c:97 Code: f4 ff ff ff e8 11 9f ea ff 48 c7 05 12 fb e5 08 00 00 00 00 e9 c8 e9 ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 <48> 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 38 0c 92 7e 81 e2 RSP: 0018:ffff88806e94fc48 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffff1100d84dac5 RBX: 0000000000000001 RCX: ffffc90006197000 RDX: 0000000000040000 RSI: ffffffff86324bf3 RDI: ffff88806c26d628 RBP: ffff88806e94fc48 R08: ffff88806c1c6500 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: ffff88806c26d628 R13: ffff888090455200 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007f3a107e4700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3a107e3db8 CR3: 00000000a5544000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __x25_find_socket net/x25/af_x25.c:327 [inline] x25_find_socket+0x7d/0x140 net/x25/af_x25.c:342 x25_new_lci net/x25/af_x25.c:355 [inline] x25_connect+0x380/0xde0 net/x25/af_x25.c:784 __sys_connect+0x266/0x330 net/socket.c:1662 __do_sys_connect net/socket.c:1673 [inline] __se_sys_connect net/socket.c:1670 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1670 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f3a107e3c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e29 RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000005 RBP: 000000000073c040 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3a107e46d4 R13: 00000000004be362 R14: 00000000004ceb98 R15: 00000000ffffffff Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 10493 Comm: syz-executor.3 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline] RIP: 0010:queued_write_lock_slowpath+0x143/0x290 kernel/locking/qrwlock.c:86 Code: 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 41 0f b6 55 00 <41> 38 d7 7c eb 84 d2 74 e7 48 89 df e8 cc aa 4e 00 eb dd be 04 00 RSP: 0018:ffff888085c47bd8 EFLAGS: 00000206 RAX: 0000000000000300 RBX: ffffffff89412b00 RCX: 1ffffffff1282560 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89412b00 RBP: ffff888085c47c70 R08: 1ffffffff1282560 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: 00000000000000ff R13: fffffbfff1282560 R14: 1ffff11010b88f7d R15: 0000000000000003 FS: 00007fdd04086700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdd04064db8 CR3: 0000000090be0000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: queued_write_lock include/asm-generic/qrwlock.h:104 [inline] do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203 __raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline] _raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312 x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267 x25_bind+0x273/0x340 net/x25/af_x25.c:703 __sys_bind+0x23f/0x290 net/socket.c:1481 __do_sys_bind net/socket.c:1492 [inline] __se_sys_bind net/socket.c:1490 [inline] __x64_sys_bind+0x73/0xb0 net/socket.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Fixes: 90c27297a9bf ("X.25 remove bkl in bind") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: andrew hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: dsa: Remove documentation for port_fdb_prepareHauke Mehrtens
This callback was removed some time ago, also remove the documentation. Fixes: 1b6dd556c304 ("net: dsa: Remove prepare phase for FDB") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23Revert "bridge: do not add port to router list when receives query with ↵Hangbin Liu
source 0.0.0.0" This reverts commit 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0") and commit 0fe5119e267f ("net: bridge: remove ipv6 zero address check in mcast queries") The reason is RFC 4541 is not a standard but suggestive. Currently we will elect 0.0.0.0 as Querier if there is no ip address configured on bridge. If we do not add the port which recives query with source 0.0.0.0 to router list, the IGMP reports will not be about to forward to Querier, IGMP data will also not be able to forward to dest. As Nikolay suggested, revert this change first and add a boolopt api to disable none-zero election in future if needed. Reported-by: Linus Lüssing <linus.luessing@c0d3.blue> Reported-by: Sebastian Gottschall <s.gottschall@newmedia-net.de> Fixes: 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0") Fixes: 0fe5119e267f ("net: bridge: remove ipv6 zero address check in mcast queries") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23selftests: fib_tests: sleep after changing carrier. again.Thadeu Lima de Souza Cascardo
Just like commit e2ba732a1681 ("selftests: fib_tests: sleep after changing carrier"), wait one second to allow linkwatch to propagate the carrier change to the stack. There are two sets of carrier tests. The first slept after the carrier was set to off, and when the second set ran, it was likely that the linkwatch would be able to run again without much delay, reducing the likelihood of a race. However, if you run 'fib_tests.sh -t carrier' on a loop, you will quickly notice the failures. Sleeping on the second set of tests make the failures go away. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: set static variable an initial value in atl2_probe()Mao Wenan
cards_found is a static variable, but when it enters atl2_probe(), cards_found is set to zero, the value is not consistent with last probe, so next behavior is not our expect. Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10GMaxime Chevallier
Some Marvell Alaska PHYs support 2.5G, 5G and 10G BaseT links. Their default behaviour is to advertise all of these modes, but at the moment, only 10GBaseT is supported. To prevent link partners from establishing link at that speed, clear these modes upon configuring aneg parameters. Fixes: 20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reported-by: Russell King <linux@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23Merge tag 'powerpc-5.0-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "One fix for an oops when using SRIOV, introduced by the recent changes to support compound IOMMU groups. Thanks to Alexey Kardashevskiy" * tag 'powerpc-5.0-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv/sriov: Register IOMMU groups for VFs
2019-02-23Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four small fixes: three in drivers and one in the core. The core fix is also minor in scope since the bug it fixes is only known to affect systems using SCSI reservations. Of the driver bugs, the libsas one is the most major because it can lead to multiple disks on the same expander not being exposed" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: reset host byte in DID_NEXUS_FAILURE case scsi: libsas: Fix rphy phy_identifier for PHYs with end devices attached scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task
2019-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2019-02-23 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a bug in BPF's LPM deletion logic to match correct prefix length, from Alban. 2) Fix AF_XDP teardown by not destroying umem prematurely as it is still needed till all outstanding skbs are freed, from Björn. 3) Fix unkillable BPF_PROG_TEST_RUN under preempt kernel by checking signal_pending() outside need_resched() condition which is never triggered there, from Stanislav. 4) Fix two nfp JIT bugs, one in code emission for K-based xor, and another one to explicitly clear upper bits in alu32, from Jiong. 5) Add bpf list address to maintainers file, from Daniel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22Merge branch 'fixes-v5.0-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull keys fixes from James Morris: "Two fixes from Eric Biggers" * 'fixes-v5.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: always initialize keyring_index_key::desc_len KEYS: user: Align the payload buffer
2019-02-22Merge tag 'pm-5.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a regression in the PM-runtime framework introduced by the recent switch-over of it to using hrtimers and a use-after-free introduced by one of the recent changes in the scmi-cpufreq driver. Specifics: - Use hrtimer_try_to_cancel() instead of hrtimer_cancel() in the PM-runtime framework to avoid a possible timer-related deadlock introduced recently (Vincent Guittot). - Reorder the scmi-cpufreq driver code to avoid accessing memory that has just been freed (Yangtao Li)" * tag 'pm-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM-runtime: Fix deadlock when canceling hrtimer cpufreq: scmi: Fix use-after-free in scmi_cpufreq_exit()
2019-02-22Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Only a handful of device tree fixes, all simple enough: NVIDIA Tegra: - Fix a regression for booting on chromebooks TI OMAP: - Two fixes PHY mode on am335x reference boards Marvell mvebu: - A regression fix for Armada XP NAND flash controllers - An incorrect reset signal on the clearfog board" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: tegra: Restore DT ABI on Tegra124 Chromebooks ARM: dts: am335x-evm: Fix PHY mode for ethernet ARM: dts: am335x-evmsk: Fix PHY mode for ethernet arm64: dts: clearfog-gt-8k: fix SGMII PHY reset signal ARM: dts: armada-xp: fix Armada XP boards NAND description
2019-02-22Merge tag 'arc-5.0-final' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "Fixes for ARC for 5.0, bunch of those are stable fodder anyways so sooner the better. - Fix memcpy to prevent prefetchw beyond end of buffer [Eugeniy] - Enable unaligned access early to prevent exceptions given newer gcc code gen [Eugeniy] - Tighten up uboot arg checking to prevent false negatives and also allow both jtag and bootloading to coexist w/o config option as needed by kernelCi folks [Eugeniy] - Set slab alignment to 8 for ARC to avoid the atomic64_t unalign [Alexey] - Disable regfile auto save on interrupts on HSDK platform due to a silicon issue [Vineet] - Avoid HS38x boot printing crash by not reading HS48x only reg [Vineet]" * tag 'arc-5.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARCv2: don't assume core 0x54 has dual issue ARC: define ARCH_SLAB_MINALIGN = 8 ARC: enable uboot support unconditionally ARC: U-boot: check arguments paranoidly ARCv2: support manual regfile save on interrupts ARC: uacces: remove lp_start, lp_end from clobber list ARC: fix actionpoints configuration detection ARCv2: lib: memcpy: fix doing prefetchw outside of buffer ARCv2: Enable unaligned access in early ASM code
2019-02-23bpf, doc: add bpf list as secondary entry to maintainers fileDaniel Borkmann
We recently created a bpf@vger.kernel.org list (https://lore.kernel.org/bpf/) for BPF related discussions, originally in context of BPF track at LSF/MM for topic discussions. It's *optional* but *desirable* to keep it in Cc for BPF related kernel/loader/llvm/tooling threads, meaning also infrastructure like llvm that sits on top of kernel but is crucial to BPF. In any case, netdev with it's bpf delegate is *as-is* today primary list for patches, so nothing changes in the workflow. Main purpose is to have some more awareness for the bpf@vger.kernel.org list that folks can Cc for BPF specific topics. Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-22Merge branch 'parisc-5.0-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "Fix ptrace syscall number modification which has been broken since kernel v4.5 and provide alternative email addresses for the remaining users of the retired parisc-linux.org email domain" * 'parisc-5.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: CREDITS/MAINTAINERS: Retire parisc-linux.org email domain parisc: Fix ptrace syscall number modification
2019-02-22Merge tag 'kbuild-fixes-v5.0-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild fixes from Masahiro Yamada: - fix scripts/kallsyms.c to correctly check too long symbol names - fix sh build error for the combination of CONFIG_OF_EARLY_FLATTREE=y and CONFIG_USE_BUILTIN_DTB=n * tag 'kbuild-fixes-v5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: sh: fix build error for invisible CONFIG_BUILTIN_DTB_SOURCE kallsyms: Handle too long symbols in kallsyms.c
2019-02-22Merge branch 'udp-a-few-fixes'David S. Miller
Paolo Abeni says: ==================== udp: a few fixes This series includes some UDP-related fixlet. All this stuff has been pointed out by the sparse tool. The first two patches are just annotation related, while the last 2 cover some very unlikely races. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22udp: fix possible user after free in error handlerPaolo Abeni
Similar to the previous commit, this addresses the same issue for ipv4: use a single fetch operation and use the correct rcu annotation. Fixes: e7cc082455cb ("udp: Support for error handlers of tunnels with arbitrary destination port") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22udpv6: fix possible user after free in error handlerPaolo Abeni
Before derefencing the encap pointer, commit e7cc082455cb ("udp: Support for error handlers of tunnels with arbitrary destination port") checks for a NULL value, but the two fetch operation can race with removal. Fix the above using a single access. Also fix a couple of type annotations, to make sparse happy. Fixes: e7cc082455cb ("udp: Support for error handlers of tunnels with arbitrary destination port") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22fou6: fix proto error handler argument typePaolo Abeni
Last argument of gue6_err_proto_handler() has a wrong type annotation, fix it and make sparse happy again. Fixes: b8a51b38e4d4 ("fou, fou6: ICMP error handlers for FoU and GUE") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22udpv6: add the required annotation to mib typePaolo Abeni
In commit 029a37434880 ("udp6: cleanup stats accounting in recvmsg()") I forgot to add the percpu annotation for the mib pointer. Add it, and make sparse happy. Fixes: 029a37434880 ("udp6: cleanup stats accounting in recvmsg()") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22mdio_bus: Fix use-after-free on device_register failsYueHaibing
KASAN has found use-after-free in fixed_mdio_bus_init, commit 0c692d07842a ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") call put_device() while device_register() fails,give up the last reference to the device and allow mdiobus_release to be executed ,kfreeing the bus. However in most drives, mdiobus_free be called to free the bus while mdiobus_register fails. use-after-free occurs when access bus again, this patch revert it to let mdiobus_free free the bus. KASAN report details as below: BUG: KASAN: use-after-free in mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 Read of size 4 at addr ffff8881dc824d78 by task syz-executor.0/3524 CPU: 1 PID: 3524 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 fixed_mdio_bus_init+0x283/0x1000 [fixed_phy] ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6215c19c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00007f6215c19c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6215c1a6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 Allocated by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] mdiobus_alloc_size+0x54/0x1b0 drivers/net/phy/mdio_bus.c:143 fixed_mdio_bus_init+0x163/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kfree+0xe1/0x270 mm/slub.c:3938 device_release+0x78/0x200 drivers/base/core.c:919 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 put_device+0x1c/0x30 drivers/base/core.c:2060 __mdiobus_register+0x483/0x560 drivers/net/phy/mdio_bus.c:382 fixed_mdio_bus_init+0x26b/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881dc824c80 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 248 bytes inside of 2048-byte region [ffff8881dc824c80, ffff8881dc825480) The buggy address belongs to the page: page:ffffea0007720800 count:1 mapcount:0 mapping:ffff8881f6c02800 index:0x0 compound_mapcount: 0 flags: 0x2fffc0000010200(slab|head) raw: 02fffc0000010200 0000000000000000 0000000500000001 ffff8881f6c02800 raw: 0000000000000000 00000000800f000f 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881dc824c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881dc824c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881dc824d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881dc824d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881dc824e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 0c692d07842a ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255Kalash Nainwal
Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255 to keep legacy software happy. This is similar to what was done for ipv4 in commit 709772e6e065 ("net: Fix routing tables with id > 255 for legacy software"). Signed-off-by: Kalash Nainwal <kalash@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22Merge branch 'bnxt_en-firmware-message-delay-fixes'David S. Miller
Michael Chan says: ==================== bnxt_en: firmware message delay fixes. We were seeing some intermittent firmware message timeouts in our lab and these 2 small patches fix them. Please apply to stable as well. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22bnxt_en: Wait longer for the firmware message response to complete.Michael Chan
The code waits up to 20 usec for the firmware response to complete once we've seen the valid response header in the buffer. It turns out that in some scenarios, this wait time is not long enough. Extend it to 150 usec and use usleep_range() instead of udelay(). Fixes: 9751e8e71487 ("bnxt_en: reduce timeout on initial HWRM calls") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22bnxt_en: Fix typo in firmware message timeout logic.Michael Chan
The logic that polls for the firmware message response uses a shorter sleep interval for the first few passes. But there was a typo so it was using the wrong counter (larger counter) for these short sleep passes. The result is a slightly shorter timeout period for these firmware messages than intended. Fix it by using the proper counter. Fixes: 9751e8e71487 ("bnxt_en: reduce timeout on initial HWRM calls") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23Merge branch 'bpf-nfp-codegen-fixes'Daniel Borkmann
Jiong Wang says: ==================== Code-gen for BPF_ALU | BPF_XOR | BPF_K is wrong when imm is -1, also high 32-bit of 64-bit register should always be cleared. This set fixed both bugs. ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-23nfp: bpf: fix ALU32 high bits clearance bugJiong Wang
NFP BPF JIT compiler is doing a couple of small optimizations when jitting ALU imm instructions, some of these optimizations could save code-gen, for example: A & -1 = A A | 0 = A A ^ 0 = A However, for ALU32, high 32-bit of the 64-bit register should still be cleared according to ISA semantics. Fixes: cd7df56ed3e6 ("nfp: add BPF to NFP code translator") Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-23nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_KJiong Wang
The intended optimization should be A ^ 0 = A, not A ^ -1 = A. Fixes: cd7df56ed3e6 ("nfp: add BPF to NFP code translator") Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-22Merge tag 'mac80211-for-davem-2019-02-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Three more fixes: * mac80211 mesh code wasn't allocating SKB tailroom properly in some cases * tx_sk_pacing_shift should be 7 for better performance * mac80211_hwsim wasn't propagating genlmsg_reply() errors ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22Documentation: networking: switchdev: Update port parent ID sectionFlorian Fainelli
Update the section about switchdev drivers having to implement a switchdev_port_attr_get() function to return SWITCHDEV_ATTR_ID_PORT_PARENT_ID since that is no longer valid after commit bccb30254a4a ("net: Get rid of SWITCHDEV_ATTR_ID_PORT_PARENT_ID"). Fixes: bccb30254a4a ("net: Get rid of SWITCHDEV_ATTR_ID_PORT_PARENT_ID") Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: socket: add check for negative optlen in compat setsockoptJann Horn
__sys_setsockopt() already checks for `optlen < 0`. Add an equivalent check to the compat path for robustness. This has to be `> INT_MAX` instead of `< 0` because the signedness of `optlen` is different here. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22ipv6: route: purge exception on removalPaolo Abeni
When a netdevice is unregistered, we flush the relevant exception via rt6_sync_down_dev() -> fib6_ifdown() -> fib6_del() -> fib6_del_route(). Finally, we end-up calling rt6_remove_exception(), where we release the relevant dst, while we keep the references to the related fib6_info and dev. Such references should be released later when the dst will be destroyed. There are a number of caches that can keep the exception around for an unlimited amount of time - namely dst_cache, possibly even socket cache. As a result device registration may hang, as demonstrated by this script: ip netns add cl ip netns add rt ip netns add srv ip netns exec rt sysctl -w net.ipv6.conf.all.forwarding=1 ip link add name cl_veth type veth peer name cl_rt_veth ip link set dev cl_veth netns cl ip -n cl link set dev cl_veth up ip -n cl addr add dev cl_veth 2001::2/64 ip -n cl route add default via 2001::1 ip -n cl link add tunv6 type ip6tnl mode ip6ip6 local 2001::2 remote 2002::1 hoplimit 64 dev cl_veth ip -n cl link set tunv6 up ip -n cl addr add 2013::2/64 dev tunv6 ip link set dev cl_rt_veth netns rt ip -n rt link set dev cl_rt_veth up ip -n rt addr add dev cl_rt_veth 2001::1/64 ip link add name rt_srv_veth type veth peer name srv_veth ip link set dev srv_veth netns srv ip -n srv link set dev srv_veth up ip -n srv addr add dev srv_veth 2002::1/64 ip -n srv route add default via 2002::2 ip -n srv link add tunv6 type ip6tnl mode ip6ip6 local 2002::1 remote 2001::2 hoplimit 64 dev srv_veth ip -n srv link set tunv6 up ip -n srv addr add 2013::1/64 dev tunv6 ip link set dev rt_srv_veth netns rt ip -n rt link set dev rt_srv_veth up ip -n rt addr add dev rt_srv_veth 2002::2/64 ip netns exec srv netserver & sleep 0.1 ip netns exec cl ping6 -c 4 2013::1 ip netns exec cl netperf -H 2013::1 -t TCP_STREAM -l 3 & sleep 1 ip -n rt link set dev rt_srv_veth mtu 1400 wait %2 ip -n cl link del cl_veth This commit addresses the issue purging all the references held by the exception at time, as we currently do for e.g. ipv6 pcpu dst entries. v1 -> v2: - re-order the code to avoid accessing dst and net after dst_dev_put() Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22Merge branch 'nic-thunderx-fix-communication-races-between-VF-PF'David S. Miller
Vadim Lomovtsev says: ==================== nic: thunderx: fix communication races between VF & PF The ThunderX CN88XX NIC Virtual Function driver uses mailbox interface to communicate to physical function driver. Each of VF has it's own pair of mailbox registers to read from and write to. The mailbox registers has no protection from possible races, so it has to be implemented at software side. After long term testing by loop of 'ip link set <ifname> up/down' command it was found that there are two possible scenarios when race condition appears: 1. VF receives link change message from PF and VF send RX mode configuration message to PF in the same time from separate thread. 2. PF receives RX mode configuration from VF and in the same time, in separate thread PF detects link status change and sends appropriate message to particular VF. Both cases leads to mailbox data to be rewritten, NIC VF messaging control data to be updated incorrectly and communication sequence gets broken. This patch series is to address race condition with VF & PF communication. Changes: v1 -> v2 - 0000: correct typo in cover letter subject: 'betwen' -> 'between'; - move link state polling request task from pf to vf instead of cheking status of mailbox irq; v2 -> v3 - 0003: change return type of nicvf_send_cfg_done() function from int to void; - 0007: update subject and remove unused variable 'netdev' from nicvf_link_status_check_task() function; ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: remove link change polling code and info from nicpfVadim Lomovtsev
Since link change polling routine was moved to nicvf side, we don't need anymore polling function at nicpf side along with link status info for all enabled Vfs as at VF side this info is already tracked. This commit is to remove unnecessary code & fields from nicpf structure. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: move link state polling function to VFVadim Lomovtsev
Move the link change polling task to VF side in order to prevent races between VF and PF while sending link change message(s). This commit is to implement link change request to be initiated by VF. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: add mutex to protect mailbox from concurrent calls for same VFVadim Lomovtsev
In some cases it could happen that nicvf_send_msg_to_pf() could be called concurrently for the same NIC VF, and thus re-writing mailbox contents and breaking messaging sequence with PF by re-writing NICVF data. This commit is to implement mutex for NICVF to protect mailbox registers and NICVF messaging control data from concurrent access. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 06:47:23 +0000