summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-04-25ath9k: cleanup hw pll work handlerSenthil Balasubramanian
There is no reason why pll work handler should be part of xmit file. move it to main.c so that reading hw check routines are all in the same place. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k: optimize the usage of power save wrappers.Senthil Balasubramanian
We need not wake up the chip even before mutex lock is acquired and also that it is required only if we are going to drain the txq. So place the wrappers accordingly and this change is also useful when there are no pending frames in the txq as we do not wake up the chip unnecessarily. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Fix incorrect baseband PLL phase shift for AR9485Senthil Balasubramanian
we should program the AR9485 baseband PLL phase shift to 6 and a redundant setting overwrites the correct value. Remove the incorrect and unwnated register setting. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k: Fix LED gpio for AR93xx chipsets.Senthil Balasubramanian
The LED gpio is incorrectly programmed for AR9300 and so the led is not working propelry. AR93xx uses gpio 10 for LED and not the default. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25cfg80211: module_param to disable HT40 in 2.4GHz bandAmitkumar Karwar
Currently mac80211 uses ieee80211_disable_40mhz_24ghz module parameter to allow disabling 40MHz operation in the 2.4GHz band. Move this handling from mac80211 to cfg80211 so that the feature will be more generic. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k: Fix warning: symbol 'ath9k_platform_id_table' was not declared. ↵Vasanthakumar Thiagarajan
Should it be static? Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k: Fix bug in configuring hw timerVasanthakumar Thiagarajan
Hw next tigger time is configured as current_tsf + (timer_period * 10) which is wrong, it should be current_tsf + timer_period. The wrong hw timer configuration would cause btcoex related issues. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25mac80211: tear down BA sessions properly on suspendJohannes Berg
Currently, the code to tear down BA sessions will execute after queues are stopped, but attempt to send frames, so those frames will just get queued, which isn't intended. Move this code to before to tear down the sessions properly. Additionally, after stopping queues, flush the TX queues in the driver driver to make sure all the frames went out. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25mwl8k: Enable life time expiry for tx packets in the hardwareNishant Sarmukadam
Tell the firmware to enable the life time expiry of tx packets in the hardware. The hardware will now refer to the timestamp in every tx packet and decide whether the packet needs to be dropped or transmitted. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Pradeep Nemavat <pnemavat@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25mwl8k: Reserve buffers for tx management framesNishant Sarmukadam
Since queues are not stopped anymore, management frames would be dropped if the corresponding tx queue is full. This can cause issues say when we want to setup an ampdu stream and action frames i.e addba requests keep getting dropped frequently. Fix this by reserving some buffers to allow management frames to go through in queue full conditions. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Pradeep Nemavat <pnemavat@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25mwl8k: Add timestamp information for tx packetsPradeep Nemavat
Timestamp tx packets using a HW micro-second timer. This timestamp will be compared to the current timestamp in the hardware and if the difference is greater than 500ms, the packet will be dropped. Signed-off-by: Pradeep Nemavat <pnemavat@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25mwl8k: Do not stop tx queuesPradeep Nemavat
This is in preparation to support life time expiry of packets in the hardware to avoid head-of-line blocking where a slow client can hog a tx queue and affect the traffic to a faster client from the same queue. Time stamp the packets in driver to allow dropping them in the hardware if they are queued for more than 500ms. If queues are stopped, packets will be queued up outside the driver. Since we will be able to timestamp the packets only after they hit the driver, the timestamp will be less accurate since we cannot consider the time the packets spent in queues outside the driver. With this commit, to achieve accurate timestamping, the tx queues will not be stopped in normal conditions. The only scenarios where the queues will be stopped are when firmware commands are executing or if the interface is brought down. Now, we need to be prepared for a situation where packets hit the driver even after the tx queues are full. Drop all such packets in the driver itself. Signed-off-by: Pradeep Nemavat <pnemavat@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25iwlwifi: fix possible data overwrite in hcmd callbackStanislaw Gruszka
My commit 3598e1774c94e55c71b585340e7dc4538f310e3f "iwlwifi: fix enqueue hcmd race conditions" move hcmd callback after command queue reclaim, to avoid call it with hcmd_lock. But since queue read index was updated, cmd data can be overwritten. Fix problem by calling callback before taking hcmd_lock and queue reclaim. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ssb: cc: add & fix definesRafał Miłecki
We probably got false positive results for checking PLL being down. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_htc: Remove unused macros and structuresSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_htc: Use power save wrappers when accessing HWSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_htc: Fix max A-MPDU size handlingSujith Manoharan
Set the maximum ampdu size of a station correctly in the target by using the ampdu_factor. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_htc: Fix AMPDU subframe handlingSujith Manoharan
* Register the driver's maximum ampdu subframe limit to mac80211. * Cleanup the target capabilities structure and fix an endian issue. * Fix BTCOEX by sending a command to the target when the BT priority changes. * Bump the required firmware version to 1.1 Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k: Fix warnings from -Wunused-but-set-variableSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ssb: cc: use correct min_msk for 0x4312Rafał Miłecki
Default min_msk on my 0x4312 is 0x80000CBB, not 0xCBB. Now we follow specs and wl (noticed in MMIO dumps). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ssb: pci: trivial: correct amount of maximum retriesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Enable AR9340 supportVasanthakumar Thiagarajan
AR9340 is a AR9003 family built-in 2x2 wmac of ar934x SOCs. It is single band in ar9341 SOC and dual band in ar9344/ar9342 SOCs. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Disable INTR_HOST1_FATAL to avoid interrupt strom with ar9430Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Assign macversion based on devid for built-in wmacVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k: Add AR9340 platform id to id tableVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Read iq calibration data only for active chainsVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Configure chain switch table and attenuation control only for ↵Vasanthakumar Thiagarajan
active chains Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Enable byte Tx/Rx data swap for AR9340Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Configure tuning capacitance value for AR9340 as wellVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Skip internal regulator configuration for AR9340Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Don't configure AR_CH0_THERM for AR9340Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Fix register offset AR_PHY_65NM_CH0_THERM for AR9340Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Clean up rx/tx chain configuration before AGC/IQ calVasanthakumar Thiagarajan
Use hw supported chains instead of hard coded values. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Configure RF channel freqency for AR9340Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Read spur frequency information from eeprom for AR9340Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Initialize tx and rx gain table from initvals.h for ar9340Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Don't do ani initialization for AR9340Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Initialize mode registers from initvals.h for AR9340Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Add initvals.h for ar9340Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Configure pll control register accordingly for AR9340Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Get AHB clock information from ath9k_platform_dataVasanthakumar Thiagarajan
Add a bool in ath9k_platform_data to pass AHB clock speed information. Driver needs this to configure PLL on some SOCs. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Take care of few host interface register changes for AR9340Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Define devid and mac version for AR9340Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25Merge branch 'wireless-next-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2011-04-25Merge branch 'for-linville' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
2011-04-22iwlagn: remove hw_ready variableJohannes Berg
This variable is only ever checked right after the function that sets it, but the same function will also return the status, so we can pass it through instead of checking hw_ready later. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-22iwlagn: combine firmware code/dataJohannes Berg
On new hardware, ucode images always come in pairs: code and data. Therefore, combine the variables into an appropriate struct and use that when both code and data are needed. Also, combine allocation and copying so that we have less code in total. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-22iwlagn: implement synchronous firmware loadJohannes Berg
The current firmware loading mechanism in iwlwifi is very hard to follow, and thus hard to maintain. To make it easier, make the firmware loading synchronous. For now, as a side effect, this removes a number of retry possibilities we had. It isn't typical for this to fail, but if it does happen we restart from scratch which this also makes easier to do should it be necessary. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-22iwlagn: leave notification waits on firmware errorsJohannes Berg
When the firmware encounters an error while the driver is waiting for a notification, it will never get that notification. Therefore, instead of timing out, bail out on errors when waiting for notifications. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-22iwlagn: make iwlagn_wait_notification return error codeJohannes Berg
We're unlikely to care about the actual time spent waiting, so make the function return an error code which is less error prone in coding new uses. Also, while at it, mark __must_check. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 10:25:52 +0000