summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-09-23perf tools: Add support for disabling -Werror via WERROR=0Darren Hart
GCC often introduces new warnings with lots of false positives - breaking -Werror builds. WERROR=0 allows one to build perf without much fuss - while still encouraging people to send patches to avoid the fuss of having to type WERROR=0. Bisecting back to commits that produce a (mostly harmless) warning on some compilers is more difficult. With WERROR=0 one could bisect without worrying about harmless warnings. Cc: Ingo Molnar <mingo@elte.hu> Link: http://lkml.kernel.org/r/eac06c7cc4920e5d4830417d466161fb26c7359c.1315514559.git.dvhart@linux.intel.com Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23perf top: Fix userspace sample addr map offsetArnaldo Carvalho de Melo
The 'perf top' tool came from the kernel where we had each DSO (vmlinux, modules) loaded just once at a time. But userspace may have DSOs loaded in multiple addresses (shared libraries), requiring that we use the just resolved map instead of the first one found. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ag53wz0yllpgers0n2w7hchp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23perf symbols: Fix issue with binaries using 16-bytes buildids (v2)Stephane Eranian
Buildid can vary in size. According to the man page of ld, buildid can be 160 bits (sha1) or 128 bits (md5, uuid). Perf assumes buildid size of 20 bytes (160 bits) regardless. When dealing with md5 buildids, it would thus read more than needed and that would cause mismatches and samples without symbols. This patch fixes this by taking into account the actual buildid size as encoded int he section header. The leftover bytes are also cleared. This second version fixes a minor issue with the memset() base position. Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@gmail.com> Link: http://lkml.kernel.org/r/4cc1af3c.8ee7d80a.5a28.ffff868e@mx.google.com Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23perf tool: Fix endianness handling of u32 data in samplesDavid Ahern
Currently, analyzing PPC data files on x86 the cpu field is always 0 and the tid and pid are backwards. For example, analyzing a PPC file on PPC the pid/tid fields show: rsyslogd 1210/1212 and analyzing the same PPC file using an x86 perf binary shows: rsyslogd 1212/1210 The problem is that the swap_op method for samples is perf_event__all64_swap which assumes all elements in the sample_data struct are u64s. cpu, tid and pid are u32s and need to be handled individually. Given that the swap is done before the sample is parsed, the simplest solution is to undo the 64-bit swap of those elements when the sample is parsed and do the proper swap. The RAW data field is generic and perf cannot have programmatic knowledge of how to treat that data. Instead a warning is given to the user. Thanks to Anton Blanchard for providing a data file for a mult-CPU PPC system so I could verify the fix for the CPU fields. v3 -> v4: - fixed use of WARN_ONCE v2 -> v3: - used WARN_ONCE for message regarding raw data - removed struct wrapper around union - fixed whitespace issues v1 -> v2: - added a union for undoing the byte-swap on u64 and redoing swap on u32's to address compiler errors (see git commit 65014ab3) Cc: Anton Blanchard <anton@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1315321946-16993-1-git-send-email-dsahern@gmail.com Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23perf sort: Fix symbol sort output by separating unresolved samples by typeAnton Blanchard
I took a profile that suggested 60% of total CPU time was in the hypervisor: ... 60.20% [H] 0x33d43c 4.43% [k] ._spin_lock_irqsave 1.07% [k] ._spin_lock Using perf stat to get the user/kernel/hypervisor breakdown contradicted this. The problem is we merge all unresolved samples into the one unknown bucket. If add a comparison by sample type to sort__sym_cmp we get the real picture: ... 57.11% [.] 0x80fbf63c 4.43% [k] ._spin_lock_irqsave 1.07% [k] ._spin_lock 0.65% [H] 0x33d43c So it was almost all userspace, not hypervisor as the initial profile suggested. I found another issue while adding this. Symbol sorting sometimes shows multiple entries for the unknown bucket: ... 16.65% [.] 0x6cd3a8 7.25% [.] 0x422460 5.37% [.] yylex 4.79% [.] malloc 4.78% [.] _int_malloc 4.03% [.] _int_free 3.95% [.] hash_source_code_string 2.82% [.] 0x532908 2.64% [.] 0x36b538 0.94% [H] 0x8000000000e132a4 0.82% [H] 0x800000000000e8b0 This happens because we aren't consistent with our sorting. On one hand we check to see if both symbols match and for two unresolved samples sym is NULL so we match: if (left->ms.sym == right->ms.sym) return 0; On the other hand we use sample IP for unresolved samples when comparing against a symbol: ip_l = left->ms.sym ? left->ms.sym->start : left->ip; ip_r = right->ms.sym ? right->ms.sym->start : right->ip; This means unresolved samples end up spread across the rbtree and we can't merge them all. If we use cmp_null all unresolved samples will end up in the one bucket and the output makes more sense: ... 39.12% [.] 0x36b538 5.37% [.] yylex 4.79% [.] malloc 4.78% [.] _int_malloc 4.03% [.] _int_free 3.95% [.] hash_source_code_string 2.26% [H] 0x800000000000e8b0 Acked-by: Eric B Munson <emunson@mgebm.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ian Munsie <imunsie@au1.ibm.com> Link: http://lkml.kernel.org/r/20110831115145.4f598ab2@kryten Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23perf symbols: Synthesize anonymous mmap eventsAnton Blanchard
perf_event__synthesize_mmap_events does not create anonymous mmap events even though the kernel does. As a result an already running application with dynamically created code will not get profiled - all samples end up in the unknown bucket. This patch skips any entries with '[' in the name to avoid adding events for special regions (eg the vsyscall page). All other executable mmaps are assumed to be anonymous and an event is synthesized. Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Eric B Munson <emunson@mgebm.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Link: http://lkml.kernel.org/r/20110830091506.60b51fe8@kryten Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23perf record: Create events initially disabled and enable after initDavid Ahern
perf-record currently creates events enabled. When doing a system wide collection (-a arg) this causes data collection for perf's initialization activities -- eg., perf_event__synthesize_threads(). For some events (e.g., context switch S/W event or tracepoints like syscalls) perf's initialization causes a lot of events to be captured frequently generating "Check IO/CPU overload!" warnings on larger systems (e.g., 2 socket, quad core, hyperthreading). perf's initialization phase can be skipped by creating events disabled and then enabling them once the initialization is done. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1314289075-14706-1-git-send-email-dsahern@gmail.com Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23perf symbols: Add some heuristics for choosing the best duplicate symbolAnton Blanchard
Try and pick the best symbol based on a few heuristics: - Prefer a non weak symbol over a weak one - Prefer a global symbol over a non global one - Prefer a symbol with less underscores (idea taken from kallsyms.c) - If all else fails, choose the symbol with the longest name Cc: Eric B Munson <emunson@mgebm.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110824065243.161953371@samba.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23perf symbols: Preserve symbol scope when parsing /proc/kallsymsAnton Blanchard
kallsyms__parse capitalises the symbol type, so every symbol is marked global. Remove this and fix symbol_type__is_a to handle both local and global symbols. Cc: Eric B Munson <emunson@mgebm.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110824065243.077125989@samba.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23perf symbols: /proc/kallsyms does not sort module symbolsAnton Blanchard
kallsyms__parse assumes that /proc/kallsyms is sorted and sets the end of the previous symbol to the start of the current one. Unfortunately module symbols are not sorted, eg: ffffffffa0081f30 t e1000_clean_rx_irq [e1000e] ffffffffa00817a0 t e1000_alloc_rx_buffers [e1000e] Some symbols end up with a negative length and others have a length larger than they should. This results in confusing perf output. We already have a function to fixup the end of zero length symbols so use that instead. Cc: Eric B Munson <emunson@mgebm.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110824065242.969681349@samba.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23perf symbols: Fix ppc64 SEGV in dso__load_sym with debuginfo filesAnton Blanchard
64bit PowerPC debuginfo files have an empty function descriptor section. I hit a SEGV when perf tried to use this section for symbol resolution. To fix this we need to check the section is valid and we can do this by checking for type SHT_PROGBITS. Cc: <stable@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Eric B Munson <emunson@mgebm.net> Link: http://lkml.kernel.org/r/20110824065242.895239970@samba.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23perf probe: Fix regression of variable finderMasami Hiramatsu
Fix to call convert_variable() if previous call does not fail. To call convert_variable, it ensures "ret" is 0. However, since "ret" has the return value of synthesize_perf_probe_arg() which always returns positive value if it succeeded, perf probe doesn't call convert_variable(). This will cause a SEGV when we add an event with arguments. This has to be fixed as it ensures "ret" is greater than 0 (or not negative). This regression has been introduced by my previous patch, f182e3e1. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20110820053922.3286.65805.stgit@fedora15 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-21Linux 3.1-rc7Linus Torvalds
2011-09-21XZ: Fix incorrect XZ_BUF_ERRORLasse Collin
xz_dec_run() could incorrectly return XZ_BUF_ERROR if all of the following was true: - The caller knows how many bytes of output to expect and only provides that much output space. - When the last output bytes are decoded, the caller-provided input buffer ends right before the LZMA2 end of payload marker. So LZMA2 won't provide more output anymore, but it won't know it yet and thus won't return XZ_STREAM_END yet. - A BCJ filter is in use and it hasn't left any unfiltered bytes in the temp buffer. This can happen with any BCJ filter, but in practice it's more likely with filters other than the x86 BCJ. This fixes <https://bugzilla.redhat.com/show_bug.cgi?id=735408> where Squashfs thinks that a valid file system is corrupt. This also fixes a similar bug in single-call mode where the uncompressed size of a block using BCJ + LZMA2 was 0 bytes and caller provided no output space. Many empty .xz files don't contain any blocks and thus don't trigger this bug. This also tweaks a closely related detail: xz_dec_bcj_run() could call xz_dec_lzma2_run() to decode into temp buffer when it was known to be useless. This was harmless although it wasted a minuscule number of CPU cycles. Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Cc: stable <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-21Merge git://github.com/davem330/netLinus Torvalds
* git://github.com/davem330/net: (27 commits) xfrm: Perform a replay check after return from async codepaths fib:fix BUG_ON in fib_nl_newrule when add new fib rule ixgbe: fix possible null buffer error tg3: fix VLAN tagging regression net: pxa168: Fix build errors by including interrupt.h netconsole: switch init_netconsole() to late_initcall gianfar: Fix overflow check and return value for gfar_get_cls_all() ppp_generic: fix multilink fragment MTU calculation (again) GRETH: avoid overwrite IP-stack's IP-frags checksum GRETH: RX/TX bytes were never increased ipv6: fix a possible double free b43: Fix beacon problem in ad-hoc mode Bluetooth: add support for 2011 mac mini Bluetooth: Add MacBookAir4,1 support Bluetooth: Fixed BT ST Channel reg order r8169: do not enable the TBI for anything but the original 8169. r8169: remove erroneous processing of always set bit. r8169: fix WOL setting for 8105 and 8111evl r8169: add MODULE_FIRMWARE for the firmware of 8111evl r8169: fix the reset setting for 8111evl ...
2011-09-21Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-block: floppy: use del_timer_sync() in init cleanup blk-cgroup: be able to remove the record of unplugged device block: Don't check QUEUE_FLAG_SAME_COMP in __blk_complete_request mm: Add comment explaining task state setting in bdi_forker_thread() mm: Cleanup clearing of BDI_pending bit in bdi_forker_thread() block: simplify force plug flush code a little bit block: change force plug flush call order block: Fix queue_flag update when rq_affinity goes from 2 to 1 block: separate priority boosting from REQ_META block: remove READ_META and WRITE_META xen-blkback: fixed indentation and comments xen-blkback: Don't disconnect backend until state switched to XenbusStateClosed.
2011-09-21init: carefully handle loglevel option on kernel cmdline.Alexander Sverdlin
When a malformed loglevel value (for example "${abc}") is passed on the kernel cmdline, the loglevel itself is being set to 0. That then suppresses all following messages, including all the errors and crashes caused by other malformed cmdline options. This could make debugging process quite tricky. This patch leaves the previous value of loglevel if the new value is incorrect and reports an error code in this case. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@sysgo.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-21teach /proc/$pid/numa_maps about transparent hugepagesDave Hansen
This is modeled after the smaps code. It detects transparent hugepages and then does a single gather_stats() for the page as a whole. This has two benifits: 1. It is more efficient since it does many pages in a single shot. 2. It does not have to break down the huge page. Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-21break out numa_maps gather_pte_stats() checksDave Hansen
gather_pte_stats() does a number of checks on a target page to see whether it should even be considered for statistics. This breaks that code out in to a separate function so that we can use it in the transparent hugepage case in the next patch. Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Acked-by: Hugh Dickins <hughd@google.com> Reviewed-by: Christoph Lameter <cl@gentwo.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-21make /proc/$pid/numa_maps gather_stats() take variable page sizeDave Hansen
We need to teach the numa_maps code about transparent huge pages. The first step is to teach gather_stats() that the pte it is dealing with might represent more than one page. Note that will we use this in a moment for transparent huge pages since they have use a single pmd_t which _acts_ as a "surrogate" for a bunch of smaller pte_t's. I'm a _bit_ unhappy that this interface counts in hugetlbfs page sizes for hugetlbfs pages and PAGE_SIZE for normal pages. That means that to figure out how many _bytes_ "dirty=1" means, you must first know the hugetlbfs page size. That's easier said than done especially if you don't have visibility in to the mount. But, that's probably a discussion for another day especially since it would change behavior to fix it. But, just in case anyone wonders why this patch only passes a '1' in the hugetlb case... Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-21xfrm: Perform a replay check after return from async codepathsSteffen Klassert
When asyncronous crypto algorithms are used, there might be many packets that passed the xfrm replay check, but the replay advance function is not called yet for these packets. So the replay check function would accept a replay of all of these packets. Also the system might crash if there are more packets in async processing than the size of the anti replay window, because the replay advance function would try to update the replay window beyond the bounds. This pach adds a second replay check after resuming from the async processing to fix these issues. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-21fib:fix BUG_ON in fib_nl_newrule when add new fib ruleGao feng
add new fib rule can cause BUG_ON happen the reproduce shell is ip rule add pref 38 ip rule add pref 38 ip rule add to 192.168.3.0/24 goto 38 ip rule del pref 38 ip rule add to 192.168.3.0/24 goto 38 ip rule add pref 38 then the BUG_ON will happen del BUG_ON and use (ctarget == NULL) identify whether this rule is unresolved Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-21floppy: use del_timer_sync() in init cleanupCarsten Emde
When no floppy is found the module code can be released while a timer function is pending or about to be executed. CPU0 CPU1 floppy_init() timer_softirq() spin_lock_irq(&base->lock); detach_timer(); spin_unlock_irq(&base->lock); -> Interrupt del_timer(); return -ENODEV; module_cleanup(); <- EOI call_timer_fn(); OOPS Use del_timer_sync() to prevent this. Signed-off-by: Carsten Emde <C.Emde@osadl.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21blk-cgroup: be able to remove the record of unplugged deviceWanlong Gao
The bug is we're not able to remove the device from blkio cgroup's per-device control files if it gets unplugged. To reproduce the bug: # mount -t cgroup -o blkio xxx /cgroup # cd /cgroup # echo "8:0 1000" > blkio.throttle.read_bps_device # unplug the device # cat blkio.throttle.read_bps_device 8:0 1000 # echo "8:0 0" > blkio.throttle.read_bps_device -bash: echo: write error: No such device After patching, the device removal will succeed. Thanks for the comments of Paul, Zefan, and Vivek. Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Paul Menage <paul@paulmenage.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21ixgbe: fix possible null buffer errorJesse Brandeburg
It seems that at least one PPC machine would occasionally give a (valid) 0 as the return value from dma_map, this caused the ixgbe code to not work correctly. A fix is pending in the PPC tree to not return 0 from dma map, but we can also fix the driver to make sure we don't mess up in other arches as well. This patch is applicable to all current stable kernels. Ref: https://bugzilla.redhat.com/show_bug.cgi?id=683611 Reported-by: Neil Horman <nhorman@redhat.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: stable@kernel.org Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-21tg3: fix VLAN tagging regressionKasper Pedersen
commit 92cd3a17ce9c719abb4c28dee3438e0c641f8de4 tg3: Simplify tx bd assignments broke VLAN tagging on outbound packets. It ifdef'ed BCM_KERNEL_SUPPORTS_8021Q, but this is not set anywhere. So vlan never gets set, and all packets are sent with vlan=0. v2: We can just remove the test. vlan_tx_tag_present is valid regardless of whether the 802.1q module is built. Tested on BCM5721 rev 11. Signed-off-by: Kasper Pedersen <kernel@kasperkp.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20Merge branch 'fixes' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'fixes' of git://git.linaro.org/people/arnd/arm-soc: mach-integrator: fix VGA base regression arm/dt: Tegra: Update SDHCI nodes to match bindings ARM: EXYNOS4: fix incorrect pad configuration for keypad row lines ARM: SAMSUNG: fix to prevent declaring duplicated ARM: SAMSUNG: fix watchdog reset issue with clk_get() ARM: S3C64XX: Remove un-used code backlight code on SMDK6410 ARM: EXYNOS4: restart clocksource while system resumes ARM: EXYNOS4: Fix routing timer interrupt to offline CPU ARM: EXYNOS4: Fix return type of local_timer_setup() ARM: EXYNOS4: Fix wrong pll type for vpll ARM: Dove: fix second SPI initialization call
2011-09-20Merge branch 'for-linus' of git://github.com/chrismason/linuxLinus Torvalds
* 'for-linus' of git://github.com/chrismason/linux: Btrfs: reserve sufficient space for ioctl clone
2011-09-20staging: zcache: fix cleancache crashSeth Jennings
After commit c5f5c4db3938 ("staging: zcache: fix crash on high memory swap") cleancache crashes on the first successful get. This was caused by a remaining virt_to_page() call in zcache_pampd_get_data_and_free() that only gets run in the cleancache path. The patch converts the virt_to_page() to struct page casting like was done for other instances in c5f5c4db3938. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Tested-By: Valdis Kletnieks <valdis.kletnieks@vt.edu> Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-20mach-integrator: fix VGA base regressionLinus Walleij
The changes introduced in commit cc22b4c18540e5e8bf55c7d124044f9317527d3c "ARM: set vga memory base at run-time" Makes the Integrator/AP freeze completely. I appears that this is due to the VGA base address being assigned at PCI init time, while this base is needed earlier than that. Moving the initialization of the base address to the .map_io function solves this problem. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-20arm/dt: Tegra: Update SDHCI nodes to match bindingsStephen Warren
The bindings were recently updated to have separate properties for each type of GPIO. Update the Device Tree source to match that. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-20net: pxa168: Fix build errors by including interrupt.hTanmay Upadhyay
Commit a6b7a407865aab9f849dd99a71072b7cd1175116 removed linux/interrupt.h from netdevice.h. This fixes below build failure drivers/net/pxa168_eth.c: In function 'pxa168_eth_collect_events': drivers/net/pxa168_eth.c:866: error: 'IRQ_NONE' undeclared (first use in this function) drivers/net/pxa168_eth.c:866: error: (Each undeclared identifier is reported only once drivers/net/pxa168_eth.c:866: error: for each function it appears in.) drivers/net/pxa168_eth.c: At top level: drivers/net/pxa168_eth.c:913: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'pxa168_eth_int_handler' drivers/net/pxa168_eth.c: In function 'pxa168_eth_open': drivers/net/pxa168_eth.c:1133: error: implicit declaration of function 'request_irq' drivers/net/pxa168_eth.c:1133: error: 'pxa168_eth_int_handler' undeclared (first use in this function) drivers/net/pxa168_eth.c:1134: error: 'IRQF_DISABLED' undeclared (first use in this function) drivers/net/pxa168_eth.c:1160: error: implicit declaration of function 'free_irq' Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20netconsole: switch init_netconsole() to late_initcallLin Ming
Commit 88491d8(drivers/net: Kconfig & Makefile cleanup) causes a regression that netconsole does not work if netconsole and network device driver are build into kernel, because netconsole is linked before network device driver. Andrew Morton suggested to fix this with initcall ordering. Fixes it by switching init_netconsole() to late_initcall. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20gianfar: Fix overflow check and return value for gfar_get_cls_all()Ben Hutchings
This function may currently fill one entry beyond the end of the array it is given. It also doesn't return an error code in case it does detect overflow. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20ppp_generic: fix multilink fragment MTU calculation (again)Henry Wong
When using MLPPP, the maximum size of a fragment is incorrectly calculated with an offset of -2. This patch reverses the changes in the patch found here: http://marc.info/?l=linux-netdev&m=123541324010539&w=2 The value of hdrlen includes the size of both the 2-byte PPP protocol field and the 2- or 4-byte multilink header (2+4=6 for long sequence numbers, 2+2=4 for short sequence numbers). Section 2 of RFC1661 says that the MRU that is negotiated (i.e., the MTU of the sending system) includes only the PPP payload but not the protocol field, thus the correct MTU should be the link's MTU minus the multilink header (mtu - (hdrlen-2)). The incorrect calculation causes Linux to fragment packets to a size two bytes smaller than the allowed MTU. While not technically illegal, this behaviour confounds MRU-tuning to avoid PPP-layer fragmentation. Signed-off-by: Henry Wong <henry@stuffedcow.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20GRETH: avoid overwrite IP-stack's IP-frags checksumDaniel Hellstrom
The GRETH GBIT core does not do checksum offloading for IP segmentation. This patch adds a check in the xmit function to determine if the stack has calculated the checksum for us. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20GRETH: RX/TX bytes were never increasedDaniel Hellstrom
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20ipv6: fix a possible double freeRoy Li
When calling snmp6_alloc_dev fails, the snmp6 relevant memory are freed by snmp6_alloc_dev. Calling in6_dev_finish_destroy will free these memory twice. Double free will lead that undefined behavior occurs. Signed-off-by: Roy Li <rongqing.li@windriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20Merge branch 'btrfs-3.0' into for-linusChris Mason
2011-09-20Btrfs: reserve sufficient space for ioctl cloneSage Weil
Fix a crash/BUG_ON in the clone ioctl due to insufficient reservation. We need to reserve space for: - adjusting the old extent (possibly splitting it) - adding the new extent - updating the inode Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-20Merge branch 'davem.r8169.fixes' of git://violet.fr.zoreil.com/romieu/linuxDavid S. Miller
2011-09-20Merge git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
* git://git.samba.org/sfrench/cifs-2.6: cifs: Fix broken sec=ntlmv2/i sec option (try #2) Fix the conflict between rwpidforward and rw mount options CIFS: Fix ERR_PTR dereference in cifs_get_root cifs: fix possible memory corruption in CIFSFindNext
2011-09-20Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
* git://www.linux-watchdog.org/linux-watchdog: watchdog: Initconst section fixes for watchdog watchdog: lantiq: fix watchdogs timeout handling watchdog: hpwdt: prevent multiple "NMI occurred" messages watchdog: WatchDog Timer Driver Core - use passed watchdog_device
2011-09-20Merge branch 'for-linus' of git://github.com/tiwai/soundLinus Torvalds
* 'for-linus' of git://github.com/tiwai/sound: ALSA: HDA: Add support for IDT 92HD93 ALSA: hda/realtek - Fix auto-mute with HP+LO configuration
2011-09-20Merge branch 'master' of ssh://infradead/~/public_git/wireless into for-davemJohn W. Linville
2011-09-20watchdog: Initconst section fixes for watchdogAndi Kleen
Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-09-20watchdog: lantiq: fix watchdogs timeout handlingJohn Crispin
The enable function was using the global timeout variable for local operations. This resulted in the value of the global variable being corrupted, thus breaking the code. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org Cc: linux-mips@linux-mips.org
2011-09-20watchdog: hpwdt: prevent multiple "NMI occurred" messagesNaga Chumbalkar
On platforms with no iCRU support don't print two, (possibly conflicting), "NMI occurred" messages when the firmware is unable to source the NMI. Please note that one of the enhancements to the v1.3.0 hpwdt driver is to panic and allow KDUMP to succeed even on NMIs that are unknown to the platform firmware. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Reviewed-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-09-20watchdog: WatchDog Timer Driver Core - use passed watchdog_deviceH Hartley Sweeten
Use the passed watchdog_device instead of the static global variable when testing and setting the status in watchdog_ping, watchdog_start, and watchdog_stop. Note that the callers of these functions are actually passing the static global variable. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-09-20ALSA: HDA: Add support for IDT 92HD93David Henningsson
Cc: stable@kernel.org BugLink: http://bugs.launchpad.net/bugs/854468 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-22 19:17:46 +0000