summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-01-03wireless: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ssb: fix sparse warnings in driver_chipcommon_sflash.cHauke Mehrtens
CHECK drivers/ssb/driver_chipcommon_sflash.c drivers/ssb/driver_chipcommon_sflash.c:40:11: warning: Using plain integer as NULL pointer drivers/ssb/driver_chipcommon_sflash.c:58:11: warning: Using plain integer as NULL pointer drivers/ssb/driver_chipcommon_sflash.c:69:11: warning: Using plain integer as NULL pointer Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03bcma: fix sparse warnings in driver_chipcommon_sflash.cHauke Mehrtens
CHECK drivers/bcma/driver_chipcommon_sflash.c drivers/bcma/driver_chipcommon_sflash.c:41:11: warning: Using plain integer as NULL pointer drivers/bcma/driver_chipcommon_sflash.c:59:11: warning: Using plain integer as NULL pointer drivers/bcma/driver_chipcommon_sflash.c:70:11: warning: Using plain integer as NULL pointer Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Fix regulatory complianceSujith Manoharan
The maximum permissible values for noise floor in ETSI and Japan domains have been updated with new EU regulations for CCA detection. Adjust the values in the driver accordingly. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Fix AR955x RX sensitivitySujith Manoharan
AR955x has problems with RX sensitivity in 2G. This patch adds a routine to select range_osdac dynamically on a per-chain basis to address this issue. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03wireless: cw1200: Fix memory leak in cw1200_wow_suspend()Christian Engelmayer
Fix a memory leak in the cw1200_wow_suspend() error handling path. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Add hardware support for QCA9531Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Initialize QCA953x INI arraysSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Add QCA953x initvalsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Assign macVersion for QCA9531Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Add version/revision macros for QCA9531Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03carl9170: use ether_addr_equal_64bitsJulia Lawall
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_hdr defined in include/linux/ieee80211.h, ieee80211_bar defined in include/linux/ieee80211.h and ath_common defined in drivers/net/wireless/ath/ath.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03at76c50x-usb: use ether_addr_equal_64bitsJulia Lawall
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: at76_priv defined in drivers/net/wireless/at76c50x-usb.h and ieee80211_mgmt defined in include/linux/ieee80211.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ipw2x00: use ether_addr_equal_64bitsJulia Lawall
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structure involved is libipw_network defined in drivers/net/wireless/ipw2x00/libipw.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: use ether_addr_equal_64bitsJulia Lawall
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_hdr defined in include/linux/ieee80211.h ath_common defined in drivers/net/wireless/ath/ath.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03iwlegacy: use ether_addr_equal_64bitsJulia Lawall
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_hdr defined in include/linux/ieee80211.h, il_priv defined in drivers/net/wireless/iwlegacy/common.h and il_rxon_cmd defined in drivers/net/wireless/iwlegacy/commands.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03rtlwifi: use ether_addr_equal_64bitsJulia Lawall
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_hdr defined in include/linux/ieee80211.h and rtl_mac defined in drivers/net/wireless/rtlwifi/wifi.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03mwl8k: use ether_addr_equal_64bitsJulia Lawall
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_hdr defined in include/linux/ieee80211.h and mwl8k_priv defined in drivers/net/wireless/mwl8k.c This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03p54: use ether_addr_equal_64bitsJulia Lawall
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_hdr defined in include/linux/ieee80211.h and p54_common defined in drivers/net/wireless/p54/p54.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath5k: use ether_addr_equal_64bitsJulia Lawall
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_mgmt defined in include/linux/ieee80211.h and ath_common defined in drivers/net/wireless/ath/ath.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03rt2x00: use ether_addr_equal_64bitsJulia Lawall
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_bar defined in include/linux/ieee80211.h and rt2x00_bar_list_entry defined in drivers/net/wireless/rt2x00/rt2x00.h. This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Fix interrupt statisticsSujith Manoharan
Initialize "sync_cause" to zero since commit "ath9k: move ath9k_debug_sync_cause out of ath9k_hw" fills it conditionally based on ISR status. Not doing this results in garbage values in debugfs. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Remove unused config option ack_6mbSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Fix AR9100 chip power-onSujith Manoharan
AR9100 requires a larger delay after waking up the RTC. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Cleanup __ath9k_hw_init()Sujith Manoharan
* Move initialization of config variables to ath9k_hw_init_config(). * Move initialization of defaults to ath9k_hw_init_defaults(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Handle unsupported MAC versions earlySujith Manoharan
There is no point in trying to bring up the chip when the MAC version is not present in the supported list. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Move private HW callbacks to hw-ops.hSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Remove unused functionsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Fix "cc_lock" usageSujith Manoharan
IRQ save/restore is not required for the cycle counters since they are accessed only from softirq and process context. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Process BB watchdog events in the taskletSujith Manoharan
Move the BB processing code to the tasklet and avoid doing it in the ISR, there is no real benefit and this makes the ISR less heavy. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Remove RX PollSujith Manoharan
This patch removes the convoluted and hacky method of monitoring for connectivity. We rely on mac80211's connection loss logic and doing it in the driver is not necessary. The HW check for MAC/BB hangs is also simplified, there is no need to have a separate work instance for it. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Fix baseband watchdog resetSujith Manoharan
Do a HW reset only for required signatures. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Identify baseband watchdog signaturesSujith Manoharan
A full HW reset is not required for all baseband watchdog signatures. Some BB watchdog updates are benign and can be discarded, some require re-programming of certain registers and others require a chip reset. This patch adds a routine to identify such signatures. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Fix baseband watchdog interruptsSujith Manoharan
Program the required baseband watchdog interrupt mask to ensure that the correct watchdog interrupts are raised when the BB is hung for some reason. Also, use the capability HW_BB_WATCHDOG instead of relying on other flags. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Fix PHY restart workaroundSujith Manoharan
The PHY restart workaround that handles baseband hangs for packets with unsupported rates is required only for a HW bug in AR9300 v2.2. All the subsequent chips in the AR9003 family do not require this driver fix since it has been addressed in the HW. Since the value of the AR_PHY_RESTART register is written with the default initvals, make sure that PHY restart is always disabled once this particular BB hang signaure has been encountered. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Fix MAC HW hang check for AR9003Sujith Manoharan
The current method of identifying MAC hangs is convoluted and also, the signatures are wrong and don't apply to all the chips in the AR9003 family. Fix this by cleaning up the code and checking for the correct hang signatures. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Add HW callbacks for MAC/BB hang checksSujith Manoharan
This is required for adding separate hang check routines for AR9002 and AR9003. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Register supported HW hang checksSujith Manoharan
HW hang checks have to be done on a per-chip basis. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Fix max AMPDU size calculationSujith Manoharan
The maximum A-MPDU size is calculated in ath_tx_aggr_start(), so there is no need to do it in node_attach() too. Also, make sure that the correct size is calculated as described in 8.4.2.58.3. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03net: wireless: brcm80211: Drop debug version with build date/timeJosh Triplett
The kernel already has this information, and individual drivers shouldn't duplicate that. This also eliminates the use of __DATE__ and __TIME__, which make the build non-deterministic. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k_hw: fix TSF offset calculationFelix Fietkau
Since the unit is microseconds and not milliseconds, tv_sec needs to be multiplied by 1000000, not 1000. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k_hw: fix gentimer callback without overflow handlerFelix Fietkau
If a gentimer has both the trigger and the overflow bits set, only mask out the trigger bit if an overflow handler is present. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: fix sparse non static symbol warningWei Yongjun
Fixes the following sparse warning: drivers/net/wireless/ath/ath9k/spectral.c:500:24: warning: symbol 'rfs_spec_scan_cb' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03drivers/net/wireless/hostap: Integer overflowWenliang Fan
The local variable 'value' comes from 'extra', a parameter of function 'prism2_ioctl_priv_prism2_param'. If a large number passed to 'value', there would be an integer overflow in the following line: local->passive_scan_timer.expires = jiffies + local->passive_scan_interval * HZ Signed-off-by: Wenliang Fan <fanwlexca@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2014-01-03Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-12-31iwlwifi: mvm: fix coccinelle warningsFengguang Wu
drivers/net/wireless/iwlwifi/mvm/led.c:106:2-3: Unneeded semicolon Removes unneeded semicolon. Generated by: coccinelle/misc/semicolon.cocci CC: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: Update Copyright to 2014Emmanuel Grumbach
Happy new year! Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: mvm: rs: fix a potential NULL derefEyal Shapira
Found by klocwork analysis. mvm could be NULL which may cause a NULL dereference in a theoretical call flow rs_fill_lq_cmd(mvm = NULL, ...) rs_build_rates_table rs_fill_rates_for_column ucode_rate_from_rs_rate IWL_ERR(mvm,...) No real reason for passing NULL to rs_fill_lq_cmd so fix that. Reported-by: Eytan Lifshitz <eytan.lifshitz@intel.com> Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 12:43:36 +0000