summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-15SUNRPC: Fix the minimal size for reply buffer allocationTrond Myklebust
We must at minimum allocate enough memory to be able to see any auth errors in the reply from the server. Fixes: 2c94b8eca1a26 ("SUNRPC: Use au_rslack when computing reply...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-15SUNRPC: Fix a client regression when handling oversized repliesTrond Myklebust
If the server sends a reply that is larger than the pre-allocated buffer, then the current code may fail to register how much of the stream that it has finished reading. This again can lead to hangs. Fixes: e92053a52e68 ("SUNRPC: Handle zero length fragments correctly") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-15iommu/amd: Fix NULL dereference bug in match_hid_uidAaron Ma
Add a non-NULL check to fix potential NULL pointer dereference Cleanup code to call function once. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Fixes: 2bf9a0a12749b ('iommu/amd: Add iommu support for ACPI HID devices') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-03-15Merge branches 'fixes', 'misc' and 'smp-hotplug' into for-nextRussell King
2019-03-15xen/balloon: Fix mapping PG_offline pages to user spaceDavid Hildenbrand
The XEN balloon driver - in contrast to other balloon drivers - allows to map some inflated pages to user space. Such pages are allocated via alloc_xenballooned_pages() and freed via free_xenballooned_pages(). The pfn space of these allocated pages is used to map other things by the hypervisor using hypercalls. Pages marked with PG_offline must never be mapped to user space (as this page type uses the mapcount field of struct pages). So what we can do is, clear/set PG_offline when allocating/freeing an inflated pages. This way, most inflated pages can be excluded by dumping tools and the "reused for other purpose" balloon pages are correctly not marked as PG_offline. Fixes: 77c4adf6a6df (xen/balloon: mark inflated pages PG_offline) Reported-by: Julien Grall <julien.grall@arm.com> Tested-by: Julien Grall <julien.grall@arm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-03-15perf/x86: Fixup typo in stub functionsPeter Zijlstra
Guenter reported a build warning for CONFIG_CPU_SUP_INTEL=n: > With allmodconfig-CONFIG_CPU_SUP_INTEL, this patch results in: > > In file included from arch/x86/events/amd/core.c:8:0: > arch/x86/events/amd/../perf_event.h:1036:45: warning: ‘struct cpu_hw_event’ declared inside parameter list will not be visible outside of this definition or declaration > static inline int intel_cpuc_prepare(struct cpu_hw_event *cpuc, int cpu) While harmless (an unsed pointer is an unused pointer, no matter the type) it needs fixing. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: d01b1f96a82e ("perf/x86/intel: Make cpuc allocations consistent") Link: http://lkml.kernel.org/r/20190315081410.GR5996@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-03-15perf/x86/intel: Fix memory corruptionPeter Zijlstra
Through: validate_event() x86_pmu.get_event_constraints(.idx=-1) tfa_get_event_constraints() dyn_constraint() cpuc->constraint_list[-1] is used, which is an obvious out-of-bound access. In this case, simply skip the TFA constraint code, there is no event constraint with just PMC3, therefore the code will never result in the empty set. Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort") Reported-by: Tony Jones <tonyj@suse.com> Reported-by: "DSouza, Nelson" <nelson.dsouza@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tony Jones <tonyj@suse.com> Tested-by: "DSouza, Nelson" <nelson.dsouza@intel.com> Cc: eranian@google.com Cc: jolsa@redhat.com Cc: stable@kernel.org Link: https://lkml.kernel.org/r/20190314130705.441549378@infradead.org
2019-03-14CIFS: fix POSIX lock leak and invalid ptr derefAurelien Aptel
We have a customer reporting crashes in lock_get_status() with many "Leaked POSIX lock" messages preceeding the crash. Leaked POSIX lock on dev=0x0:0x56 ... Leaked POSIX lock on dev=0x0:0x56 ... Leaked POSIX lock on dev=0x0:0x56 ... Leaked POSIX lock on dev=0x0:0x53 ... Leaked POSIX lock on dev=0x0:0x53 ... Leaked POSIX lock on dev=0x0:0x53 ... Leaked POSIX lock on dev=0x0:0x53 ... POSIX: fl_owner=ffff8900e7b79380 fl_flags=0x1 fl_type=0x1 fl_pid=20709 Leaked POSIX lock on dev=0x0:0x4b ino... Leaked locks on dev=0x0:0x4b ino=0xf911400000029: POSIX: fl_owner=ffff89f41c870e00 fl_flags=0x1 fl_type=0x1 fl_pid=19592 stack segment: 0000 [#1] SMP Modules linked in: binfmt_misc msr tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag rpcsec_gss_krb5 arc4 ecb auth_rpcgss nfsv4 md4 nfs nls_utf8 lockd grace cifs sunrpc ccm dns_resolver fscache af_packet iscsi_ibft iscsi_boot_sysfs vmw_vsock_vmci_transport vsock xfs libcrc32c sb_edac edac_core crct10dif_pclmul crc32_pclmul ghash_clmulni_intel drbg ansi_cprng vmw_balloon aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd joydev pcspkr vmxnet3 i2c_piix4 vmw_vmci shpchp fjes processor button ac btrfs xor raid6_pq sr_mod cdrom ata_generic sd_mod ata_piix vmwgfx crc32c_intel drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm serio_raw ahci libahci drm libata vmw_pvscsi sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4 Supported: Yes CPU: 6 PID: 28250 Comm: lsof Not tainted 4.4.156-94.64-default #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016 task: ffff88a345f28740 ti: ffff88c74005c000 task.ti: ffff88c74005c000 RIP: 0010:[<ffffffff8125dcab>] [<ffffffff8125dcab>] lock_get_status+0x9b/0x3b0 RSP: 0018:ffff88c74005fd90 EFLAGS: 00010202 RAX: ffff89bde83e20ae RBX: ffff89e870003d18 RCX: 0000000049534f50 RDX: ffffffff81a3541f RSI: ffffffff81a3544e RDI: ffff89bde83e20ae RBP: 0026252423222120 R08: 0000000020584953 R09: 000000000000ffff R10: 0000000000000000 R11: ffff88c74005fc70 R12: ffff89e5ca7b1340 R13: 00000000000050e5 R14: ffff89e870003d30 R15: ffff89e5ca7b1340 FS: 00007fafd64be800(0000) GS:ffff89f41fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000001c80018 CR3: 000000a522048000 CR4: 0000000000360670 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: 0000000000000208 ffffffff81a3d6b6 ffff89e870003d30 ffff89e870003d18 ffff89e5ca7b1340 ffff89f41738d7c0 ffff89e870003d30 ffff89e5ca7b1340 ffffffff8125e08f 0000000000000000 ffff89bc22b67d00 ffff88c74005ff28 Call Trace: [<ffffffff8125e08f>] locks_show+0x2f/0x70 [<ffffffff81230ad1>] seq_read+0x251/0x3a0 [<ffffffff81275bbc>] proc_reg_read+0x3c/0x70 [<ffffffff8120e456>] __vfs_read+0x26/0x140 [<ffffffff8120e9da>] vfs_read+0x7a/0x120 [<ffffffff8120faf2>] SyS_read+0x42/0xa0 [<ffffffff8161cbc3>] entry_SYSCALL_64_fastpath+0x1e/0xb7 When Linux closes a FD (close(), close-on-exec, dup2(), ...) it calls filp_close() which also removes all posix locks. The lock struct is initialized like so in filp_close() and passed down to cifs ... lock.fl_type = F_UNLCK; lock.fl_flags = FL_POSIX | FL_CLOSE; lock.fl_start = 0; lock.fl_end = OFFSET_MAX; ... Note the FL_CLOSE flag, which hints the VFS code that this unlocking is done for closing the fd. filp_close() locks_remove_posix(filp, id); vfs_lock_file(filp, F_SETLK, &lock, NULL); return filp->f_op->lock(filp, cmd, fl) => cifs_lock() rc = cifs_setlk(file, flock, type, wait_flag, posix_lck, lock, unlock, xid); rc = server->ops->mand_unlock_range(cfile, flock, xid); if (flock->fl_flags & FL_POSIX && !rc) rc = locks_lock_file_wait(file, flock) Notice how we don't call locks_lock_file_wait() which does the generic VFS lock/unlock/wait work on the inode if rc != 0. If we are closing the handle, the SMB server is supposed to remove any locks associated with it. Similarly, cifs.ko frees and wakes up any lock and lock waiter when closing the file: cifs_close() cifsFileInfo_put(file->private_data) /* * Delete any outstanding lock records. We'll lose them when the file * is closed anyway. */ down_write(&cifsi->lock_sem); list_for_each_entry_safe(li, tmp, &cifs_file->llist->locks, llist) { list_del(&li->llist); cifs_del_lock_waiters(li); kfree(li); } list_del(&cifs_file->llist->llist); kfree(cifs_file->llist); up_write(&cifsi->lock_sem); So we can safely ignore unlocking failures in cifs_lock() if they happen with the FL_CLOSE flag hint set as both the server and the client take care of it during the actual closing. This is not a proper fix for the unlocking failure but it's safe and it seems to prevent the lock leakages and crashes the customer experiences. Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-03-14SMB3: Allow SMB3 FSCTL queries to be sent to server from toolsRonnie Sahlberg
For debugging purposes we often have to be able to query additional information only available via SMB3 FSCTL from the server from user space tools (e.g. like cifs-utils's smbinfo). See MS-FSCC and MS-SMB2 protocol specifications for more details. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-14cifs: fix incorrect handling of smb2_set_sparse() return in smb3_simple_fallocRonnie Sahlberg
smb2_set_sparse does not return -errno, it returns a boolean where true means success. Change this to just ignore the return value just like the other callsites. Additionally add code to handle the case where we must set the file sparse and possibly also extending it. Fixes xfstests: generic/236 generic/350 generic/420 Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-14smb2: fix typo in definition of a few error flagsSteve French
As Sergey Senozhatsky pointed out __constant_cpu_to_le32() is misspelled in a few definitions in the list of status codes smb2status.h as __constanst_cpu_to_le32() Signed-off-by: Steve French <stfrench@microsoft.com> CC: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
2019-03-14CIFS: make mknod() an smb_version_opAurelien Aptel
This cleanup removes cifs specific code from SMB2/SMB3 code paths which is cleaner and easier to maintain as the code to handle special files is improved. Below is an example creating special files using 'sfu' mount option over SMB3 to Windows (with this patch) (Note that to Samba server, support for saving dos attributes has to be enabled for the SFU mount option to work). In the future this will also make implementation of creating special files as reparse points easier (as Windows NFS server does for example). root@smf-Thinkpad-P51:~# stat -c "%F" /mnt2/char character special file root@smf-Thinkpad-P51:~# stat -c "%F" /mnt2/block block special file Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-03-14cifs: minor documentation updatesSteve French
Also updated a comment describing use of the GlobalMid_Lock Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-14cifs: remove unused value pointed out by CoveritySteve French
Detected by CoverityScan CID#1438719 ("Unused Value") buf is reset again before being used so these two lines of code are useless. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-03-14SMB3: passthru query info doesn't check for SMB3 FSCTL passthruSteve French
The passthrough queries from user space tools like smbinfo can be either SMB3 QUERY_INFO or SMB3 FSCTL, but we are not checking for the latter. Temporarily we return EOPNOTSUPP for SMB3 FSCTL passthrough requests but once compounding fsctls is fixed can enable. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-03-14smb3: add dynamic tracepoints for simple fallocate and zero rangeSteve French
Can be helpful in debugging various xfstests that are currently skipped or failing due to missing features in our current implementation of fallocate. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-03-14cifs: fix smb3_zero_range so it can expand the file-size when requiredRonnie Sahlberg
This allows fallocate -z to work against a Windows2016 share. This is due to the SMB3 ZERO_RANGE command does not modify the filesize. To address this we will now append a compounded SET-INFO to update the end-of-file information. This brings xfstests generic/469 closer to working against a windows share. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-14cifs: add SMB2_ioctl_init/free helpers to be used with compoundingRonnie Sahlberg
Define an _init() and a _free() function for SMB2_init so that we will be able to use it with compounds. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-14smb3: Add dynamic trace points for various compounded smb3 opsSteve French
Adds trace points for enter and exit (done vs. error) for: compounded query and setinfo, hardlink, rename, mkdir, rmdir, set_eof, delete (unlink) Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-03-14cifs: cache FILE_ALL_INFO for the shared root handleRonnie Sahlberg
When we open the shared root handle also ask for FILE_ALL_INFORMATION since we can do this at zero cost as part of a compound. Cache this information as long as the lease is held and return and serve any future requests from cache. This allows us to serve "stat /<mountpoint>" directly from cache and avoid a network roundtrip. Since clients often want to do this quite a lot this improve performance slightly. As an example: xfstest generic/533 performs 43 stat operations on the root of the share while it is run. Which are eliminated with this patch. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-03-14smb3: display volume serial number for shares in /proc/fs/cifs/DebugDataSteve French
It can be helpful for debugging. According to MS-FSCC: "A 32-bit unsigned integer that contains the serial number of the volume. The serial number is an opaque value generated by the file system at format time" Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-03-14cifs: simplify how we handle credits in compound_send_recv()Ronnie Sahlberg
Since we can now wait for multiple requests atomically in wait_for_free_request() we can now greatly simplify the handling of the credits in this function. This fixes a potential deadlock where many concurrent compound requests could each have reserved 1 or 2 credits each but are all blocked waiting for the final credits they need to be able to issue the requests to the server. Set a default timeout of 60 seconds for compounded requests. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-03-14smb3: add dynamic tracepoint for timeout waiting for creditsSteve French
To help debug credit starvation problems where we timeout waiting for server to grant the client credits. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-03-14smb3: display security information in /proc/fs/cifs/DebugData more accuratelySteve French
When the server required encryption (but we didn't connect to it with the "seal" mount option) we weren't displaying in /proc/fs/cifs/DebugData that the tcon for that share was encrypted. Similarly we were not displaying that signing was required when ses->sign was enabled (we only checked ses->server->sign). This makes it easier to debug when in fact the connection is signed (or sealed), whether for performance or security questions. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-03-14cifs: add a timeout argument to wait_for_free_creditsRonnie Sahlberg
A negative timeout is the same as the current behaviour, i.e. no timeout. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-03-14cifs: prevent starvation in wait_for_free_credits for multi-credit requestsRonnie Sahlberg
Reserve the last MAX_COMPOUND credits for any request asking for >1 credit. This is to prevent future compound requests from becoming starved while waiting for potentially many requests is there is a large number of concurrent singe-credit requests. However, we need to protect from servers that are very slow to hand out new credits on new sessions so we only do this IFF there are 2*MAX_COMPOUND (arbitrary) credits already in flight. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-03-14cifs: wait_for_free_credits() make it possible to wait for >=1 creditsRonnie Sahlberg
Change wait_for_free_credits() to allow waiting for >=1 credits instead of just a single credit. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-03-14cifs: pass flags down into wait_for_free_credits()Ronnie Sahlberg
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-03-14cifs: change wait_for_free_request() to take flags as argumentRonnie Sahlberg
and compute timeout and optyp from it. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-03-14tracing/probe: Verify alloc_trace_*probe() resultMasami Hiramatsu
Since alloc_trace_*probe() returns -EINVAL only if !event && !group, it should not happen in trace_*probe_create(). If we catch that case there is a bug. So use WARN_ON_ONCE() instead of pr_info(). Link: http://lkml.kernel.org/r/155253785078.14922.16902223633734601469.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-14tracing/probe: Check event/group naming rule at parsingMasami Hiramatsu
Check event and group naming rule at parsing it instead of allocating probes. Link: http://lkml.kernel.org/r/155253784064.14922.2336893061156236237.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-14tracing/probe: Check the size of argument name and bodyMasami Hiramatsu
Check the size of argument name and expression is not 0 and smaller than maximum length. Link: http://lkml.kernel.org/r/155253783029.14922.12650939303827581096.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-14tracing/probe: Check event name length correctlyMasami Hiramatsu
Ensure given name of event is not too long when parsing it, and fix to update event name offset correctly when the group name is given. For example, this makes probe event to check the "p:foo/" error case correctly. Link: http://lkml.kernel.org/r/155253782046.14922.14724124823730168629.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-14tracing/probe: Check maxactive error casesMasami Hiramatsu
Check maxactive on kprobe error case, because maxactive is only for kretprobe, not for kprobe. Also, maxactive should not be 0, it should be at least 1. Link: http://lkml.kernel.org/r/155253780952.14922.15784129810238750331.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc patches from Andrew Morton: - a little bit more MM - a few fixups [ The "little bit more MM" is actually just one of the three patches Andrew sent for mm/filemap.c, I'm still mulling over two more of them from Josef Bacik - Linus ] * emailed patches from Andrew Morton <akpm@linux-foundation.org>: include/linux/swap.h: use offsetof() instead of custom __swapoffset macro tools/testing/selftests/proc/proc-pid-vm.c: test with vsyscall in mind zram: default to lzo-rle instead of lzo filemap: pass vm_fault to the mmap ra helpers
2019-03-14include/linux/swap.h: use offsetof() instead of custom __swapoffset macroPi-Hsun Shih
Use offsetof() to calculate offset of a field to take advantage of compiler built-in version when possible, and avoid UBSAN warning when compiling with Clang: UBSAN: Undefined behaviour in mm/swapfile.c:3010:38 member access within null pointer of type 'union swap_header' CPU: 6 PID: 1833 Comm: swapon Tainted: G S 4.19.23 #43 Call trace: dump_backtrace+0x0/0x194 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0x70/0x94 ubsan_epilogue+0x14/0x44 ubsan_type_mismatch_common+0xf4/0xfc __ubsan_handle_type_mismatch_v1+0x34/0x54 __se_sys_swapon+0x654/0x1084 __arm64_sys_swapon+0x1c/0x24 el0_svc_common+0xa8/0x150 el0_svc_compat_handler+0x2c/0x38 el0_svc_compat+0x8/0x18 Link: http://lkml.kernel.org/r/20190312081902.223764-1-pihsun@chromium.org Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14tools/testing/selftests/proc/proc-pid-vm.c: test with vsyscall in mindAlexey Dobriyan
: selftests: proc: proc-pid-vm : ======================================== : proc-pid-vm: proc-pid-vm.c:277: main: Assertion `rv == strlen(buf0)' failed. : Aborted Because the vsyscall mapping is enabled. Read from vsyscall page to tell if vsyscall is being used. Link: http://lkml.kernel.org/r/20190307183204.GA11405@avx2 Link: http://lkml.kernel.org/r/20190219094722.GB28258@shao2-debian Fixes: 34aab6bec23e7e9 ("proc: test /proc/*/maps, smaps, smaps_rollup, statm") Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reported-by: kernel test robot <rong.a.chen@intel.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14zram: default to lzo-rle instead of lzoDave Rodgman
lzo-rle gives higher performance and similar compression ratios to lzo. Link: http://lkml.kernel.org/r/20190205155944.16007-4-dave.rodgman@arm.com Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14filemap: pass vm_fault to the mmap ra helpersJosef Bacik
All of the arguments to these functions come from the vmf. Cut down on the amount of arguments passed by simply passing in the vmf to these two helpers. Link: http://lkml.kernel.org/r/20181211173801.29535-3-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14Merge tag 'acpi-5.1-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These fix a couple of issues and do some cleanups on top of the previous ACPI changes for 5.1-rc1. Specifics: - Fix a crash caused by unloading an SSDT overlay (Andy Shevchenko) - Prevent user space from getting confusing error values on failing ACPI sysfs accesses (Rafael Wysocki) - Simplify leaf node detection in the PPTT parsing code by using a new flag defined in ACPI 6.3 (Jeremy Linton) - Add missing "static" in some places in the ACPI configfs code (Andy Shevchenko) - Fix acpidbg tool path in the ACPI documentation (Flavio Suligoi)" * tag 'acpi-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: sysfs: Prevent get_status() from returning acpi_status ACPI / device_sysfs: Avoid OF modalias creation for removed device ACPI / configfs: Mark local data structures static ACPI / configfs: Mark local functions static ACPI: tables: Simplify PPTT leaf node detection ACPI: Documentation: Fix path for acpidbg tool
2019-03-14Merge tag 'pm-5.1-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are mostly fixes and cleanups on top of the previously merged power management material for 5.1-rc1 with one cpupower utility update that wasn't pushed earlier due to unfortunate timing. Specifics: - Fix registration of new cpuidle governors partially broken during the 5.0 development cycle by mistake (Rafael Wysocki). - Avoid integer overflows in the menu cpuidle governor by making it discard the overflowing data points upfront (Rafael Wysocki). - Fix minor mistake in the recent update of the iowait boost computation in the intel_pstate driver (Rafael Wysocki). - Drop incorrect __init annotation from one function in the pxa2xx cpufreq driver (Arnd Bergmann). - Fix the operating performance points (OPP) framework initialization for devices in multiple power domains if only one of them is scalable (Rajendra Nayak). - Fix mistake in dev_pm_opp_set_rate() which causes it to skip updating the performance state if the new frequency is the same as the old one (Viresh Kumar). - Rework the cancellation of wakeup source timers to avoid potential issues with it and do some cleanups unlocked by that change (Viresh Kumar, Rafael Wysocki). - Clean up the code computing the active/suspended time of devices in the PM-runtime framework after recent changes (Ulf Hansson). - Make the power management infrastructure code use pr_fmt() consistently (Joe Perches). - Clean up the generic power domains (genpd) framework somewhat (Aisheng Dong). - Improve kerneldoc comments for two functions in the cpufreq core (Rafael Wysocki). - Fix typo in a PM QoS file description comment (Aisheng Dong). - Update the handling of CPU boost frequencies in the cpupower utility (Abhishek Goel)" * tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: governor: Add new governors to cpuidle_governors again cpufreq: intel_pstate: Fix up iowait_boost computation PM / OPP: Update performance state when freq == old_freq PM / wakeup: Drop wakeup_source_drop() PM / wakeup: Rework wakeup source timer cancellation PM / domains: Remove one unnecessary blank line PM / Domains: Return early for all errors in _genpd_power_off() PM / Domains: Improve warn for multiple states but no governor OPP: Fix handling of multiple power domains PM / QoS: Fix typo in file description cpufreq: pxa2xx: remove incorrect __init annotation PM-runtime: Call pm_runtime_active|suspended_time() from sysfs PM-runtime: Consolidate code to get active/suspended time PM: Add and use pr_fmt() cpufreq: Improve kerneldoc comments for cpufreq_cpu_get/put() cpuidle: menu: Avoid overflows when computing variance tools/power/cpupower: Display boost frequency separately
2019-03-14Merge tag 'microblaze-v5.1-rc1' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
Pull Microblaze update from Michal Simek: "Simplify debugfs initialization" * tag 'microblaze-v5.1-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: no need to check return value of debugfs_create functions
2019-03-14f2fs: set pin_file under CAP_SYS_ADMINJaegeuk Kim
Android uses pin_file for uncrypt during OTA, and that should be managed by CAP_SYS_ADMIN only. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "More fixes in the queue: 1) Netfilter nat can erroneously register the device notifier twice, fix from Florian Westphal. 2) Use after free in nf_tables, from Pablo Neira Ayuso. 3) Parallel update of steering rule fix in mlx5 river, from Eli Britstein. 4) RX processing panic in lan743x, fix from Bryan Whitehead. 5) Use before initialization of TCP_SKB_CB, fix from Christoph Paasch. 6) Fix locking in SRIOV mode of mlx4 driver, from Jack Morgenstein. 7) Fix TX stalls in lan743x due to mishandling of interrupt ACKing modes, from Bryan Whitehead. 8) Fix infoleak in l2tp_ip6_recvmsg(), from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) pptp: dst_release sk_dst_cache in pptp_sock_destruct MAINTAINERS: GENET & SYSTEMPORT: Add internal Broadcom list l2tp: fix infoleak in l2tp_ip6_recvmsg() net/tls: Inform user space about send buffer availability net_sched: return correct value for *notify* functions lan743x: Fix TX Stall Issue net/mlx4_core: Fix qp mtt size calculation net/mlx4_core: Fix locking in SRIOV mode when switching between events and polling net/mlx4_core: Fix reset flow when in command polling mode mlxsw: minimal: Initialize base_mac mlxsw: core: Prevent duplication during QSFP module initialization net: dwmac-sun8i: fix a missing check of of_get_phy_mode net: sh_eth: fix a missing check of of_get_phy_mode net: 8390: fix potential NULL pointer dereferences net: fujitsu: fix a potential NULL pointer dereference net: qlogic: fix a potential NULL pointer dereference isdn: hfcpci: fix potential NULL pointer dereference Documentation: devicetree: add a new optional property for port mac address net: rocker: fix a potential NULL pointer dereference net: qlge: fix a potential NULL pointer dereference ...
2019-03-14Merge tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: - dmatest updates for modularizing common struct and code - remove SG support for VDMA xilinx IP and updates to driver - Update to dw driver to support Intel iDMA controllers multi-block support - tegra updates for proper reporting of residue - Add Snow Ridge ioatdma device id and support for IOATDMA v3.4 - struct_size() usage and useless LIST_HEAD cleanups in subsystem. - qDMA controller driver for Layerscape SoCs - stm32-dma PM Runtime support - And usual updates to imx-sdma, sprd, Documentation, fsl-edma, bcm2835, qcom_hidma etc * tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (81 commits) dmaengine: imx-sdma: fix consistent dma test failures dmaengine: imx-sdma: add a test for imx8mq multi sdma devices dmaengine: imx-sdma: add clock ratio 1:1 check dmaengine: dmatest: move test data alloc & free into functions dmaengine: dmatest: add short-hand `buf_size` var in dmatest_func() dmaengine: dmatest: wrap src & dst data into a struct dmaengine: ioatdma: support latency tolerance report (LTR) for v3.4 dmaengine: ioatdma: add descriptor pre-fetch support for v3.4 dmaengine: ioatdma: disable DCA enabling on IOATDMA v3.4 dmaengine: ioatdma: Add Snow Ridge ioatdma device id dmaengine: sprd: Change channel id to slave id for DMA cell specifier dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier dmaengine: mv_xor: Use correct device for DMA API Documentation :dmaengine: clarify DMA desc. pointer after submission Documentation: dmaengine: fix dmatest.rst warning dmaengine: k3dma: Add support for dma-channel-mask dmaengine: k3dma: Delete axi_config dmaengine: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware Documentation: bindings: dma: Add binding for dma-channel-mask Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp ...
2019-03-14Merge tag 'rproc-v5.1' of git://github.com/andersson/remoteprocLinus Torvalds
Pull remoteproc updates from Bjorn Andersson: "This contains the last patches in Loic's remoteproc resource table handling changes, a number of updates to documentation, support for invoking the crash handler (for testing purposes), a fix for the handling of virtio devices during recovery, performance state votes in Qualcomm modem driver, support for specifying board specific firmware path for Qualcomm modem driver and improved support for graceful shutdown of Qualcomm remoteprocs" * tag 'rproc-v5.1' of git://github.com/andersson/remoteproc: (33 commits) remoteproc: fix for "dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag" remoteproc: fix rproc_check_carveout_da() returned error and comments remoteproc: fix trace buffer va initialization remoteproc: fix rproc_alloc_carveout() for rproc with iommu domain remoteproc: add warning on resource table cast remoteproc: fix rproc_alloc_carveout() bad variable cast remoteproc: fix rproc_da_to_va in case of unallocated carveout remoteproc: correct rproc_mem_entry_init() comments remoteproc: fix recovery procedure rpmsg: virtio: change header file sort style rpmsg: virtio: allocate buffer from parent remoteproc: st: add reserved memory support remoteproc: create vdev subdevice with specific dma memory pool remoteproc: q6v5_adsp: Remove voting for lpass_aon clock dt-binding: remoteproc: Remove lpass_aon clock from adsp pil clock list remoteproc: q6v5-mss: Active powerdomain for SDM845 remoteproc: q6v5-mss: Vote for rpmh power domains remoteproc: qcom: Add support for parsing fw dt bindings remoteproc: qcom_q6v5: don't auto boot remote processor remoteproc: qcom: Wait for shutdown-ack/ind on sysmon shutdown ...
2019-03-14Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk subsystem updates from Stephen Boyd: "We have a fairly balanced mix of clk driver updates and clk framework updates this time around. It's the usual pile of new drivers for new hardware out there and the normal small fixes and updates, but then we have some core framework changes too. In the core framework, we introduce support for a clk_get_optional() API to get clks that may not always be populated and a way to devm manage clkdev lookups registered by provider drivers. We also do some refactoring to simplify the interface between clkdev and the common clk framework so we can reuse the DT parsing and clk_get() path in provider drivers in the future. This work will continue in the next few cycles while we convert how providers specify clk parents. On the driver side, the biggest part of the dirstat is the Amlogic clk driver that got support for the G12A SoC. It dominates with almost half the overall diff, while the second largest part of the diff is in the i.MX clk driver that gained support for imx8mm SoCs. After that, we have the Actions Semiconductor and Qualcomm drivers rounding out the big part of the dirstat because they both got new hardware support for SoCs. The rest is just various updates and non-critical fixes for existing drivers. Core: - Convert a few clk bindings to JSON schema format - Add a {devm_}clk_get_optional() API - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups - Start rewriting clk parent registration and supporting device links by moving around code that supports clk_get() and DT parsing of the 'clocks' property New Drivers: - Add Qualcomm MSM8998 RPM managed clks - IPA clk support on Qualcomm RPMh clk controllers - Actions Semi S500 SoC clk support - Support for fixed rate clks populated from an MMIO register - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H - Add TMU (timer) clocks on Renesas RZ/G2E - Add Amlogic G12A Always-On Clock Controller - Add 32k clock generation for Amlogic AXG - Add support for the Mali GPU clocks on Amlogic Meson8 - Add Amlogic G12A EE clock controller driver - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E - Add i.MX8MM SoC clk driver support Removed Drivers: - Remove clps711x driver as the board support is gone Updates: - 3rd ECO fix for Mediatek MT2712 SoCs - Updates for Qualcomm MSM8998 GCC clks - Random static analysis fixes for clk drivers - Support for sleeping gpios in the clk-gpio type - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.) - Split LCDC into two clks on the Marvell MMP2 SoC - Various DT of_node refcount fixes - Get rid of CLK_IS_BASIC from TI code (yay!) - TI Autoidle clk support - Fix Amlogic Meson8 APB clock ID name - Claim input clocks through DT for Amlogic AXG and GXBB - Correct the DU (display unit) parent clock on Renesas RZ/G2E - Exynos5433 IMEM CMU crypto clk support (SlimSS) - Fix for the PLL-MIPI on the Allwinner A23 - Fix Rockchip rk3328 PLL rate calculation - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066 - i.MX SCU clk driver clk_set_parent() and cpufreq support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT clk: fixup default index for of_clk_get_by_name() clk: Move of_clk_*() APIs into clk.c from clkdev.c clk: Inform the core about consumer devices clk: Introduce of_clk_get_hw_from_clkspec() clk: core: clarify the check for runtime PM clk: Combine __clk_get() and __clk_create_clk() clk: imx8mq: add GPIO clocks to clock tree clk: mediatek: correct cpu clock name for MT8173 SoC clk: imx: Refactor entire sccg pll clk clk: imx: scu: add cpu frequency scaling support clk: mediatek: Mark bus and DRAM related clocks as critical clk: mediatek: Add flags to mtk_gate clk: mediatek: Add MUX_FLAGS macro clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks clk: ingenic: Remove set but not used variable 'enable' clk: at91: programmable: remove unneeded register read clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel clk: mediatek: add MUX_GATE_FLAGS_2 ...
2019-03-14scsi: aacraid: Fix performance issue on logical drivesSagar Biradar
Fix performance issue where the queue depth for SmartIOC logical volumes is set to 1, and allow the usual logical volume code to be executed Fixes: a052865fe287 (aacraid: Set correct Queue Depth for HBA1000 RAW disks) Cc: stable@vger.kernel.org Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-14scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup()Dan Carpenter
It used to be that "error" was set to -ENODEV at the start of the function but we shifted some code around an now "error" is set to zero for most error paths. There is a mix of direct returns and "goto out" but I changed everything to direct returns for consistency. Fixes: 56de8357049c ("scsi: lpfc: fix calls to dma_set_mask_and_coherent()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: James Smart  <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-14Merge branches 'acpi-tables', 'acpi-debug', 'acpi-doc' and 'acpi-misc'Rafael J. Wysocki
* acpi-tables: ACPI: tables: Simplify PPTT leaf node detection * acpi-debug: ACPI: sysfs: Prevent get_status() from returning acpi_status * acpi-doc: ACPI: Documentation: Fix path for acpidbg tool * acpi-misc: ACPI / configfs: Mark local data structures static ACPI / configfs: Mark local functions static
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 11:40:39 +0000