summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-06-12Input: i8042 - increment wakeup_count for the respective portRavi Chandra Sadineni
Call pm_wakeup_event on every interrupt. This should help us in identifying if keyboard was a potential wake reason for the last resume. Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12Input: cros_ec_keyb - remove check before calling pm_wakeup_eventRavi Chandra Sadineni
Remove the unnecessary check before calling pm_wakeup_event. If the device is not wake enabled, this call is no-op anyway. Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12Input: cros_ec_keyb - switch to SPDX identifierEnric Balletbo i Serra
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12Input: cros_ec_keyb - make license text and MODULE_LICENSE matchEnric Balletbo i Serra
The license text is specifying "GPLv2" but the MODULE_LICENSE is set to GPL which means GNU Public License v2 or later. When MODULE_LICENSE and boiler plate does not match, go for boiler plate license. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-11Input: do not assign new tracking ID when changing tool typeDmitry Torokhov
We allow changing tool type (from MT_TOOL_FINGER to MT_TOOL_PALM) so we should not be forcing new tracking ID for the slot. Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-11Input: make input_report_slot_state() return booleanDmitry Torokhov
Let's make input_report_slot_state() return boolean representing whether the contact is active or not. This will allow writing code like: if (input_mt_report_slot_state(input, obj->mt_tool, obj->type != RMI_2D_OBJECT_NONE) { input_event(sensor->input, EV_ABS, ABS_MT_POSITION_X, obj->x); input_event(sensor->input, EV_ABS, ABS_MT_POSITION_Y, obj->y); ... } instead of: input_mt_report_slot_state(input, obj->mt_tool, obj->type != RMI_2D_OBJECT_NONE); if (obj->type != RMI_2D_OBJECT_NONE) { input_event(sensor->input, EV_ABS, ABS_MT_POSITION_X, obj->x); input_event(sensor->input, EV_ABS, ABS_MT_POSITION_Y, obj->y); ... } Reviewed-by: Henrik Rydberg <rydberg@bitmath.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redaht.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-11Input: synaptics-rmi4 - fix axis-swap behaviorLucas Stach
The documentation for the touchscreen-swapped-x-y property states that swapping is done after inverting if both are used. RMI4 did it the other way around, leading to inconsistent behavior with regard to other touchscreens. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-11Input: synaptics-rmi4 - fix the error return code in rmi_probe_interrupts()Wei Yongjun
The error return code PTR_ERR(data->irqdomain) is always 0 since data->irqdomain is equal to NULL in this error handling case. Fixes: 24d28e4f1271 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-05Input: synaptics-rmi4 - convert irq distribution to irq_domainNick Dyer
Convert the RMI driver to use the standard mechanism for distributing IRQs to the various functions. Tested on: * S7300 (F11, F34, F54) * S7817 (F12, F34, F54) Signed-off-by: Nick Dyer <nick@shmanahar.org> Acked-by: Christopher Heiny <cheiny@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-04Input: goldfish_events - fix checkpatch warningsRoman Kiryanov
Address issues pointed by checkpatch.pl Signed-off-by: Roman Kiryanov <rkir@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-04Input: add Spreadtrum vibrator driverXiaotong Lu
This patch adds the Spreadtrum vibrator driver, which embedded in the Spreadtrum SC27xx series PMICs. Signed-off-by: Xiaotong Lu <xiaotong.lu@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-04Input: goodix - add new ACPI id for GPD Win 2 touch screenEthan Lee
GPD Win 2 Website: http://www.gpd.hk/gpdwin2.asp Tested on a unit from the first production run sent to Indiegogo backers Signed-off-by: Ethan Lee <flibitijibibo@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-04Input: xpad - add GPD Win 2 Controller USB IDsEthan Lee
GPD Win 2 Website: http://www.gpd.hk/gpdwin2.asp Tested on a unit from the first production run sent to Indiegogo backers Signed-off-by: Ethan Lee <flibitijibibo@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-30Input: ti_am335x_tsc - prevent system suspend when TSC is in useGrygorii Strashko
Prevent system suspend while user has finger on touch screen, because TSC is wakeup source and suspending device while in use will result in failure to disable the module. This patch uses pm_stay_awake() and pm_relax() APIs to prevent and resume system suspend as required. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-30Input: ti_am335x_tsc - ack pending IRQs at probe and before suspendGrygorii Strashko
It is seen that just enabling the TSC module triggers a HW_PEN IRQ without any interaction with touchscreen by user. This results in first suspend/resume sequence to fail as system immediately wakes up from suspend as soon as HW_PEN IRQ is enabled in suspend handler due to the pending IRQ. Therefore clear all IRQs at probe and also in suspend callback for sanity. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-30Input: cros_ec_keyb - mark cros_ec_keyb driver as wake enabled device.Ravi Chandra Sadineni
Mark cros_ec_keyb has wake enabled by default. If we see a MKBP event related to keyboard, call pm_wakeup_event() to make sure wakeup triggers are accounted to keyb during suspend resume path. Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-29Input: mk712 - update documentation web linkMartin Kepplinger
At the mentioned address there's nothing found. By searching information on the controller chip still can be found, so update the link to the resulting page. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-24Input: atmel_mxt_ts - fix reset-gpio for level based irqsSebastian Reichel
The current reset-gpio support triggers an interrupt storm on platforms using the maxtouch with level based interrupt. The Motorola Droid 4, which I used for some of the tests is not affected, since it uses a edge based interrupt. This change avoids the interrupt storm by enabling the device while its interrupt is disabled. Afterwards we wait 100ms. This is important for two reasons: The device is unresponsive for some time (~22ms for mxt224E) and the CHG (interrupt) line is not working properly for 100ms. We don't need to wait for any following interrupts, since the following mxt_initialize() checks for bootloader mode anyways. This fixes a boot issue on GE PPD (watchdog kills device due to interrupt storm) and does not cause regression on Motorola Droid 4. Fixes: f657b00df22e ("Input: atmel_mxt_ts - add support for reset line") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-24Input: atmel_mxt_ts - require device properties present when probingDmitry Torokhov
The driver needs help determining whether it is dealing with a touchscreen or a touchpad, and with button mapping. Previously we supported passing this data via device properties, and also had DMI lists for Chromebooks that specified Atmel devices in ACPI, but did not provide enough data there. Now that chromeos_laptop driver is adjusted to supply necessary device properties even for ACPI devices, we can drop the DMI tables and refuse to probe if device properties are not attached to the device. We use presence of "compatible" property to determine if device properties are attached to the device or not and rely on chromeos_laptop to re-probe the device after attaching missing device properties to it. Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-24Merge branch 'ib-chrome-platform-atmel-mxt-ts-device-properties' of ↵Dmitry Torokhov
git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform into next Sync up with chrome-platform again to bring in device properties for Atmel touch controllers incompletely described in ACPI.
2018-05-24Merge tag 'v4.17-rc6' into nextDmitry Torokhov
Sync up with mainline to bring in Atmel controller changes for Caroline.
2018-05-23Input: psmouse-smbus - allow to control psmouse_deactivateBenjamin Tissoires
This seems to be Synaptics specific, as some Elan touchpads are not correctly switching to SMBus if we call deactivate before switching to SMBus on cold boot and on resume. Tested with the T480s Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23Input: elantech - detect new ICs and setup Host Notify for themBenjamin Tissoires
New ICs are using a different scheme for the alternate bus parameter. Given that they are new and are only using either PS2 only or PS2 + SMBus Host Notify, we force those new ICs to use the SMBus solution for enhanced reporting. This allows the touchpad found on the Lenovo T480s to report 5 fingers every 8 ms, instead of having a limit of 2 every 8 ms. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23Input: elantech - add support for SMBus devicesBenjamin Tissoires
Many of the Elantech devices are connected through PS/2 and a different bus (SMBus or plain I2C). To not break any existing device, we only enable SMBus based on a module parameter. If some laptops require the quirk to be set, we will have to rely on a list of PNPIds or MDI matching to individually expose those hardware over SMBus. the parameter mentioned above is elantech_smbus from the psmouse module. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23Input: elantech - query the resolution in query_infoBenjamin Tissoires
The command ETP_RESOLUTION_QUERY also contains the bus information. It is better to fetch it once, while we are querying for device information. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23Input: elantech - split device info into a separate structureBenjamin Tissoires
In preparation for SMBus device support, move static device information that we query form the touchpad upon initialization into separate structure. This will allow us to query the device without allocating memory first. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23Input: elan_i2c - add trackstick reportBenjamin Tissoires
The Elan touchpads over I2C/SMBus also can handle a trackstick. Unfortunately, nothing tells us if the device supports trackstick (the information lies in the PS/2 node), so rely on device properties to determine whether to enable the trackstick node. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1313939 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23platform/chrome: chromeos_laptop - supply properties for ACPI devicesDmitry Torokhov
BayTrail-based and newer Chromebooks describe their peripherals in ACPI; unfortunately their description is not complete, and peripherals drivers, such as driver for Atmel Touch controllers, has to resort to DMI-matching to configure the peripherals properly. To avoid polluting peripheral driver code, let's teach chromeos_laptop driver to supply missing data via generic device properties. Note we supply "compatible" string for Atmel peripherals not because it is needed for matching devices and driver (matching is still done on ACPI HID entries), but because peripherals driver will be using presence of "compatible" property to determine if device properties have been attached to the device, and fail to bind if they are absent. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Benson Leung <bleung@chromium.org>
2018-05-20Linux 4.17-rc6Linus Torvalds
2018-05-20Merge branch 'parisc-4.17-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixlets from Helge Deller: "Three small section mismatch fixes, one of them was found by 0-day test infrastructure" * 'parisc-4.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Move ccio_cujo20_fixup() into init section parisc: Move setup_profiling_timer() out of init section parisc: Move find_pa_parent_type() out of init section
2018-05-20Merge tag 'for-4.17-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "We've accumulated some fixes during the last week, some of them were in the works for a longer time but there are some newer ones too. Most of the fixes have a reproducer and fix user visible problems, also candidates for stable kernels. They IMHO qualify for a late rc, though I did not expect that many" * tag 'for-4.17-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix crash when trying to resume balance without the resume flag btrfs: Fix delalloc inodes invalidation during transaction abort btrfs: Split btrfs_del_delalloc_inode into 2 functions btrfs: fix reading stale metadata blocks after degraded raid1 mounts btrfs: property: Set incompat flag if lzo/zstd compression is set Btrfs: fix duplicate extents after fsync of file with prealloc extents Btrfs: fix xattr loss after power failure Btrfs: send, fix invalid access to commit roots due to concurrent snapshotting
2018-05-20Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: - Łukasz Stelmach spotted a couple of issues with the decompressor. - a couple of kdump fixes found while testing kdump - replace some perl with shell code - resolve SIGFPE breakage - kprobes fixes * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: fix kill( ,SIGFPE) breakage ARM: 8772/1: kprobes: Prohibit kprobes on get_user functions ARM: 8771/1: kprobes: Prohibit kprobes on do_undefinstr ARM: 8770/1: kprobes: Prohibit probing on optimized_callback ARM: 8769/1: kprobes: Fix to use get_kprobe_ctlblk after irq-disabed ARM: replace unnecessary perl with sed and the shell $(( )) operator ARM: kexec: record parent context registers for non-crash CPUs ARM: kexec: fix kdump register saving on panic() ARM: 8758/1: decompressor: restore r1 and r2 just before jumping to the kernel ARM: 8753/1: decompressor: add a missing parameter to the addruart macro
2018-05-20Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "An unfortunately larger set of fixes, but a large portion is selftests: - Fix the missing clusterid initializaiton for x2apic cluster management which caused boot failures due to IPIs being sent to the wrong cluster - Drop TX_COMPAT when a 64bit executable is exec()'ed from a compat task - Wrap access to __supported_pte_mask in __startup_64() where clang compile fails due to a non PC relative access being generated. - Two fixes for 5 level paging fallout in the decompressor: - Handle GOT correctly for paging_prepare() and cleanup_trampoline() - Fix the page table handling in cleanup_trampoline() to avoid page table corruption. - Stop special casing protection key 0 as this is inconsistent with the manpage and also inconsistent with the allocation map handling. - Override the protection key wen moving away from PROT_EXEC to prevent inaccessible memory. - Fix and update the protection key selftests to address breakage and to cover the above issue - Add a MOV SS self test" [ Part of the x86 fixes were in the earlier core pull due to dependencies ] * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86/mm: Drop TS_COMPAT on 64-bit exec() syscall x86/apic/x2apic: Initialize cluster ID properly x86/boot/compressed/64: Fix moving page table out of trampoline memory x86/boot/compressed/64: Set up GOT for paging_prepare() and cleanup_trampoline() x86/pkeys: Do not special case protection key 0 x86/pkeys/selftests: Add a test for pkey 0 x86/pkeys/selftests: Save off 'prot' for allocations x86/pkeys/selftests: Fix pointer math x86/pkeys: Override pkey when moving away from PROT_EXEC x86/pkeys/selftests: Fix pkey exhaustion test off-by-one x86/pkeys/selftests: Add PROT_EXEC test x86/pkeys/selftests: Factor out "instruction page" x86/pkeys/selftests: Allow faults on unknown keys x86/pkeys/selftests: Avoid printf-in-signal deadlocks x86/pkeys/selftests: Remove dead debugging code, fix dprint_in_signal x86/pkeys/selftests: Stop using assert() x86/pkeys/selftests: Give better unexpected fault error messages x86/selftests: Add mov_to_ss test x86/mpx/selftests: Adjust the self-test to fresh distros that export the MPX ABI x86/pkeys/selftests: Adjust the self-test to fresh distros that export the pkeys ABI ...
2018-05-20Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull UP timer fix from Thomas Gleixner: "Work around the for_each_cpu() oddity on UP kernels in the tick broadcast code which causes boot failures because the CPU0 bit is always reported as set independent of the cpumask content" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/broadcast: Use for_each_cpu() specially on UP kernels
2018-05-20Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixlets from Thomas Gleixner: "Three trivial fixlets for the scheduler: - move print_rt_rq() and print_dl_rq() declarations to the right place - make grub_reclaim() static - fix the bogus documentation reference in Kconfig" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix documentation file path sched/deadline: Make the grub_reclaim() function static sched/debug: Move the print_rt_rq() and print_dl_rq() declarations to kernel/sched/sched.h
2018-05-20Merge branch 'ras-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS fix from Thomas Gleixner: "Fix a regression in the new AMD SMCA code which issues an SMP function call from the early interrupt disabled region of CPU hotplug. To avoid that, use cached block addresses which can be used directly" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/MCE/AMD: Cache SMCA MISC block addresses
2018-05-20Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes from Thomas Gleixner: - fix segfault when processing unknown threads in cs-etm - fix "perf test inet_pton" on s390 failing due to missing inline - display all available events on 'perf annotate --stdio' - add missing newline when parsing an empty BPF program * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Add missing newline when parsing empty BPF proggie perf cs-etm: Remove redundant space perf cs-etm: Support unknown_thread in cs_etm_auxtrace perf annotate: Display all available events on --stdio perf test: "probe libc's inet_pton" fails on s390 due to missing inline
2018-05-20Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Two fixes to address shortcomings of the rwsem/percpu-rwsem lock debugging code which emits false positive warnings when the rwsem is anonymously locked and unlocked" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/percpu-rwsem: Annotate rwsem ownership transfer by setting RWSEM_OWNER_UNKNOWN locking/rwsem: Add a new RWSEM_ANONYMOUSLY_OWNED flag
2018-05-20Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Thomas Gleixner: - Use explicitely sized type for the romimage pointer in the 32bit EFI protocol struct so a 64bit kernel does not expand it to 64bit. Ditto for the 64bit struct to avoid the reverse issue on 32bit kernels. - Handle randomized tex offset correctly in the ARM64 EFI stub to avoid unaligned data resulting in stack corruption and other hard to diagnose wreckage. * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/libstub/arm64: Handle randomized TEXT_OFFSET efi: Avoid potential crashes, fix the 'struct efi_pci_io_protocol_32' definition for mixed mode
2018-05-20Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Thomas Gleixner: - Unbreak the BPF compilation which got broken by the unconditional requirement of asm-goto, which is not supported by clang. - Prevent probing on exception masking instructions in uprobes and kprobes to avoid the issues of the delayed exceptions instead of having an ugly workaround. - Prevent a double free_page() in the error path of do_kexec_load() - A set of objtool updates addressing various issues mostly related to switch tables and the noreturn detection for recursive sibling calls - Header sync for tools. * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Detect RIP-relative switch table references, part 2 objtool: Detect RIP-relative switch table references objtool: Support GCC 8 switch tables objtool: Support GCC 8's cold subfunctions objtool: Fix "noreturn" detection for recursive sibling calls objtool, kprobes/x86: Sync the latest <asm/insn.h> header with tools/objtool/arch/x86/include/asm/insn.h x86/cpufeature: Guard asm_volatile_goto usage for BPF compilation uprobes/x86: Prohibit probing on MOV SS instruction kprobes/x86: Prohibit probing on exception masking instructions x86/kexec: Avoid double free_page() upon do_kexec_load() failure
2018-05-19Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A handful of fixes. I've been queuing them up a bit too long so the list is longer than it otherwise would have been spread out across a few -rcs. In general, it's a scattering of fixes across several platforms, nothing truly serious enough to point out. There's a slightly larger batch of them for the Davinci platforms due to work to bring them back to life after some time, so there's a handful of regressions, some of them going back very far, others more recent. There's also a few patches fixing DT on Renesas platforms since they changed some bindings without remaining backwards compatible, splitting up describing LVDS as a proper bridge instead of having it as part of the display unit. We could push for them to be backwards compatible with old device trees, but it's likely to regress eventually if nobody's actually using said compatibility" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits) ARM: davinci: board-dm646x-evm: set VPIF capture card name ARM: davinci: board-dm646x-evm: pass correct I2C adapter id for VPIF ARM: davinci: dm646x: fix timer interrupt generation ARM: keystone: fix platform_domain_notifier array overrun arm64: dts: exynos: Fix interrupt type for I2S1 device on Exynos5433 ARM: dts: imx51-zii-rdu1: fix touchscreen bindings firmware: arm_scmi: Use after free in scmi_create_protocol_device() ARM: dts: cygnus: fix irq type for arm global timer Revert "ARM: dts: logicpd-som-lv: Fix pinmux controller references" tee: check shm references are consistent in offset/size tee: shm: fix use-after-free via temporarily dropped reference ARM: dts: imx7s: Pass the 'fsl,sec-era' property ARM: dts: tegra20: Revert "Fix ULPI regression on Tegra20" ARM: dts: correct missing "compatible" entry for ti81xx SoCs ARM: OMAP1: ams-delta: fix deferred_fiq handler arm64: tegra: Make BCM89610 PHY interrupt as active low ARM: davinci: fix GPIO lookup for I2C ARM: dts: logicpd-som-lv: Fix pinmux controller references ARM: dts: logicpd-som-lv: Fix Audio Mute ARM: dts: logicpd-som-lv: Fix WL127x Startup Issues ...
2018-05-19Merge tag 'tegra-for-4.17-fixes-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into fixes arm64: tegra: Device tree fixes for v4.17 This contains a one-line update to the device tree of the Tegra186 P3310 processor module, fixing the polarity of the PHY interrupt. Originally, this was queued to go into v4.18, but the PHY ID matching patch has now found its way into v4.17-rc5, which means that the PHY driver will know how to identify the PHY on this board and try to use the interrupt. This will unfortunately cause networking to break on P3310, hence why I think this should go into v4.17. * tag 'tegra-for-4.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Make BCM89610 PHY interrupt as active low Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-19ARM: fix kill( ,SIGFPE) breakageRussell King
Commit 7771c6645700 ("signal/arm: Document conflicts with SI_USER and SIGFPE") broke the siginfo structure for userspace triggered signals, causing the strace testsuite to regress. Fix this by eliminating the FPE_FIXME definition (which is at the root of the breakage) and use FPE_FLTINV instead for the case where the hardware appears to be reporting nonsense. Fixes: 7771c6645700 ("signal/arm: Document conflicts with SI_USER and SIGFPE") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-05-19Merge tag 'dmaengine-fix-4.17-rc6' of ↵Linus Torvalds
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fix from Vinod Koul: - qcom bam runtime_pm fix - email update for Vinod * tag 'dmaengine-fix-4.17-rc6' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: qcom: bam_dma: check if the runtime pm enabled dmaengine: Update email address for Vinod
2018-05-19mmap: relax file size limit for regular filesLinus Torvalds
Commit be83bbf80682 ("mmap: introduce sane default mmap limits") was introduced to catch problems in various ad-hoc character device drivers doing mmap and getting the size limits wrong. In the process, it used "known good" limits for the normal cases of mapping regular files and block device drivers. It turns out that the "s_maxbytes" limit was less "known good" than I thought. In particular, /proc doesn't set it, but exposes one regular file to mmap: /proc/vmcore. As a result, that file got limited to the default MAX_INT s_maxbytes value. This went unnoticed for a while, because apparently the only thing that needs it is the s390 kernel zfcpdump, but there might be other tools that use this too. Vasily suggested just changing s_maxbytes for all of /proc, which isn't wrong, but makes me nervous at this stage. So instead, just make the new mmap limit always be MAX_LFS_FILESIZE for regular files, which won't affect anything else. It wasn't the regular file case I was worried about. I'd really prefer for maxsize to have been per-inode, but that is not how things are today. Fixes: be83bbf80682 ("mmap: introduce sane default mmap limits") Reported-by: Vasily Gorbik <gor@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-19x86/MCE/AMD: Cache SMCA MISC block addressesBorislav Petkov
... into a global, two-dimensional array and service subsequent reads from that cache to avoid rdmsr_on_cpu() calls during CPU hotplug (IPIs with IRQs disabled). In addition, this fixes a KASAN slab-out-of-bounds read due to wrong usage of the bank->blocks pointer. Fixes: 27bd59502702 ("x86/mce/AMD: Get address from already initialized block") Reported-by: Johannes Hirte <johannes.hirte@datenkhaos.de> Tested-by: Johannes Hirte <johannes.hirte@datenkhaos.de> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yazen Ghannam <yazen.ghannam@amd.com> Link: http://lkml.kernel.org/r/20180414004230.GA2033@probook
2018-05-19ARM: 8772/1: kprobes: Prohibit kprobes on get_user functionsMasami Hiramatsu
Since do_undefinstr() uses get_user to get the undefined instruction, it can be called before kprobes processes recursive check. This can cause an infinit recursive exception. Prohibit probing on get_user functions. Fixes: 24ba613c9d6c ("ARM kprobes: core code") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-05-19ARM: 8771/1: kprobes: Prohibit kprobes on do_undefinstrMasami Hiramatsu
Prohibit kprobes on do_undefinstr because kprobes on arm is implemented by undefined instruction. This means if we probe do_undefinstr(), it can cause infinit recursive exception. Fixes: 24ba613c9d6c ("ARM kprobes: core code") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-05-19ARM: 8770/1: kprobes: Prohibit probing on optimized_callbackMasami Hiramatsu
Prohibit probing on optimized_callback() because it is called from kprobes itself. If we put a kprobes on it, that will cause a recursive call loop. Mark it NOKPROBE_SYMBOL. Fixes: 0dc016dbd820 ("ARM: kprobes: enable OPTPROBES for ARM 32") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-05-19ARM: 8769/1: kprobes: Fix to use get_kprobe_ctlblk after irq-disabedMasami Hiramatsu
Since get_kprobe_ctlblk() uses smp_processor_id() to access per-cpu variable, it hits smp_processor_id sanity check as below. [ 7.006928] BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 [ 7.007859] caller is debug_smp_processor_id+0x20/0x24 [ 7.008438] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1-00192-g4eb17253e4b5 #1 [ 7.008890] Hardware name: Generic DT based system [ 7.009917] [<c0313f0c>] (unwind_backtrace) from [<c030e6d8>] (show_stack+0x20/0x24) [ 7.010473] [<c030e6d8>] (show_stack) from [<c0c64694>] (dump_stack+0x84/0x98) [ 7.010990] [<c0c64694>] (dump_stack) from [<c071ca5c>] (check_preemption_disabled+0x138/0x13c) [ 7.011592] [<c071ca5c>] (check_preemption_disabled) from [<c071ca80>] (debug_smp_processor_id+0x20/0x24) [ 7.012214] [<c071ca80>] (debug_smp_processor_id) from [<c03335e0>] (optimized_callback+0x2c/0xe4) [ 7.013077] [<c03335e0>] (optimized_callback) from [<bf0021b0>] (0xbf0021b0) To fix this issue, call get_kprobe_ctlblk() right after irq-disabled since that disables preemption. Fixes: 0dc016dbd820 ("ARM: kprobes: enable OPTPROBES for ARM 32") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 01:33:56 +0000