summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-22qed: sanitize PBL chains allocationAlexander Lobakin
PBL chain elements are actually DMA addresses stored in __le64, but currently their size is hardcoded to 8, and DMA addresses are assigned via cast to variable-sized dma_addr_t without any bitwise conversions. Change the type of pbl_virt array to match the actual one, add a new field to store the size of allocated DMA memory and sanitize elements assignment. Misc: give more logic names to the members of qed_chain::pbl_sp embedded struct. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22qed: prevent possible double-frees of the chainsAlexander Lobakin
Zero-initialize chain on qed_chain_free(), so it couldn't be freed twice and provoke undefined behaviour. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22qed: move chain methods to a separate fileAlexander Lobakin
Move chain allocation/freeing functions to a new file to not mix it with hardware-related code. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22qed: reformat MakefileAlexander Lobakin
List one entry per line and sort them alphabetically to simplify the addition of the new ones. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22qed: reformat "qed_chain.h" a bitAlexander Lobakin
Reformat structs and macros definitions a bit prior to making functional changes. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22net: qed_hsi.h: Avoid the use of one-element arrayGustavo A. R. Silva
One-element arrays are being deprecated[1]. Replace the one-element array with a simple value type '__le32 reserved1'[2], once it seems this is just a placeholder for alignment. [1] https://github.com/KSPP/linux/issues/79 [2] https://github.com/KSPP/linux/issues/86 Tested-by: kernel test robot <lkp@intel.com> Link: https://github.com/GustavoARSilva/linux-hardening/blob/master/cii/0-day/qed_hsi-20200718.md Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22bna: bfi.h: Avoid the use of one-element arrayGustavo A. R. Silva
One-element arrays are being deprecated[1]. Replace the one-element array with a simple value type 'u8 rsvd'[2], once it seems this is just a placeholder for alignment. [1] https://github.com/KSPP/linux/issues/79 [2] https://github.com/KSPP/linux/issues/86 Tested-by: kernel test robot <lkp@intel.com> Link: https://github.com/GustavoARSilva/linux-hardening/blob/master/cii/0-day/bfi-20200718.md Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22tg3: Avoid the use of one-element arrayGustavo A. R. Silva
One-element arrays are being deprecated[1]. Replace the one-element array with a simple value type 'u32 reserved2'[2], once it seems this is just a placeholder for alignment. [1] https://github.com/KSPP/linux/issues/79 [2] https://github.com/KSPP/linux/issues/86 Tested-by: kernel test robot <lkp@intel.com> Link: https://github.com/GustavoARSilva/linux-hardening/blob/master/cii/0-day/tg3-20200718.md Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22ionic: fix memory leak of object 'lid'Colin Ian King
Currently when netdev fails to allocate the error return path fails to free the allocated object 'lid'. Fix this by setting err to the return error code and jumping to a new label that performs the kfree of lid before returning. Addresses-Coverity: ("Resource leak") Fixes: 4b03b27349c0 ("ionic: get MTU from lif identity") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22Merge branch 'l2tp-cleanup-checkpatch-pl-warnings'David S. Miller
Tom Parkin says: ==================== l2tp: cleanup checkpatch.pl warnings l2tp hasn't been kept up to date with the static analysis checks offered by checkpatch.pl. This series addresses a range of minor issues which don't involve large changes to code structure. The changes include: * tweaks to use of whitespace, comment style, line breaks, and indentation * two minor modifications to code to use a function or macro suggested by checkpatch v1 -> v2 * combine related patches (patches fixing whitespace issues, patches addressing comment style) * respin the single large patchset into a multiple smaller series for easier review ==================== Reviewed-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22l2tp: avoid precidence issues in L2TP_SKB_CB macroTom Parkin
checkpatch warned about the L2TP_SKB_CB macro's use of its argument: add braces to avoid the problem. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22l2tp: line-break long function prototypesTom Parkin
In l2tp_core.c both l2tp_tunnel_create and l2tp_session_create take quite a number of arguments and have a correspondingly long prototype. This is both quite difficult to scan visually, and triggers checkpatch warnings. Add a line break to make these function prototypes more readable. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22l2tp: prefer seq_puts for unformatted outputTom Parkin
checkpatch warns about use of seq_printf where seq_puts would do. Modify l2tp_debugfs accordingly. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22l2tp: prefer using BIT macroTom Parkin
Use BIT(x) rather than (1<<x), reported by checkpatch.pl. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22l2tp: add identifier name in function pointer prototypeTom Parkin
Reported by checkpatch: "WARNING: function definition argument 'struct sock *' should also have an identifier name" Add an identifier name to help document the prototype. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22l2tp: cleanup suspect code indentTom Parkin
l2tp_core has conditionally compiled code in l2tp_xmit_skb for IPv6 support. The structure of this code triggered a checkpatch warning due to incorrect indentation. Fix up the indentation to address the checkpatch warning. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22l2tp: cleanup wonky alignment of line-broken function callsTom Parkin
Arguments should be aligned with the function call open parenthesis as per checkpatch. Tweak some function calls which were not aligned correctly. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22l2tp: cleanup difficult-to-read line breaksTom Parkin
Some l2tp code had line breaks which made the code more difficult to read. These were originally motivated by the 80-character line width coding guidelines, but were actually a negative from the perspective of trying to follow the code. Remove these linebreaks for clearer code, even if we do exceed 80 characters in width in some places. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22l2tp: cleanup commentsTom Parkin
Modify some l2tp comments to better adhere to kernel coding style, as reported by checkpatch.pl. Add descriptive comments for the l2tp per-net spinlocks to document their use. Fix an incorrect comment in l2tp_recv_common: RFC2661 section 5.4 states that: "The LNS controls enabling and disabling of sequence numbers by sending a data message with or without sequence numbers present at any time during the life of a session." l2tp handles this correctly in l2tp_recv_common, but the comment around the code was incorrect and confusing. Fix up the comment accordingly. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22l2tp: cleanup whitespace useTom Parkin
Fix up various whitespace issues as reported by checkpatch.pl: * remove spaces around operators where appropriate, * add missing blank lines following declarations, * remove multiple blank lines, or trailing blank lines at the end of functions. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22devlink: Always use user_ptr[0] for devlink and simplify post_doitParav Pandit
Currently devlink instance is searched on all doit() operations. But it is optionally stored into user_ptr[0]. This requires rediscovering devlink again doing post_doit(). Few devlink commands related to port shared buffers needs 3 pointers (devlink, devlink_port, and devlink_sb) while executing doit commands. Though devlink pointer can be derived from the devlink_port during post_doit() operation when doit() callback has acquired devlink instance lock, relying on such scheme to access devlik pointer makes code very fragile. Hence, to avoid ambiguity in post_doit() and to avoid searching devlink instance again, simplify code by always storing devlink instance in user_ptr[0] and derive devlink_sb pointer in their respective callback routines. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22hv_netvsc: add support for vlans in AF_PACKET modeSriram Krishnan
Vlan tagged packets are getting dropped when used with DPDK that uses the AF_PACKET interface on a hyperV guest. The packet layer uses the tpacket interface to communicate the vlans information to the upper layers. On Rx path, these drivers can read the vlan info from the tpacket header but on the Tx path, this information is still within the packet frame and requires the paravirtual drivers to push this back into the NDIS header which is then used by the host OS to form the packet. This transition from the packet frame to NDIS header is currently missing hence causing the host OS to drop the all vlan tagged packets sent by the drivers that use AF_PACKET (ETH_P_ALL) such as DPDK. Here is an overview of the changes in the vlan header in the packet path: The RX path (userspace handles everything): 1. RX VLAN packet is stripped by HOST OS and placed in NDIS header 2. Guest Kernel RX hv_netvsc packets and moves VLAN info from NDIS header into kernel SKB 3. Kernel shares packets with user space application with PACKET_MMAP. The SKB VLAN info is copied to tpacket layer and indication set TP_STATUS_VLAN_VALID. 4. The user space application will re-insert the VLAN info into the frame The TX path: 1. The user space application has the VLAN info in the frame. 2. Guest kernel gets packets from the application with PACKET_MMAP. 3. The kernel later sends the frame to the hv_netvsc driver. The only way to send VLANs is when the SKB is setup & the VLAN is stripped from the frame. 4. TX VLAN is re-inserted by HOST OS based on the NDIS header. If it sees a VLAN in the frame the packet is dropped. Cc: xe-linux-external@cisco.com Cc: Sriram Krishnan <srirakr2@cisco.com> Signed-off-by: Sriram Krishnan <srirakr2@cisco.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22mptcp: zero token hash at creation time.Paolo Abeni
Otherwise the 'chain_len' filed will carry random values, some token creation calls will fail due to excessive chain length, causing unexpected fallback to TCP. Fixes: 2c5ebd001d4f ("mptcp: refactor token container") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22lan743x: remove redundant initialization of variable current_head_indexColin Ian King
The variable current_head_index is being initialized with a value that is never read and it is being updated later with a new value. Replace the initialization of -1 with the latter assignment. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22enetc: Remove the imdio bus on PF probe bailoutClaudiu Manoil
enetc_imdio_remove() is missing from the enetc_pf_probe() bailout path. Not surprisingly because enetc_setup_serdes() is registering the imdio bus for internal purposes, and it's not obvious that enetc_imdio_remove() currently performs the teardown of enetc_setup_serdes(). To fix this, define enetc_teardown_serdes() to wrap enetc_imdio_remove() (improve code maintenance) and call it on bailout and remove paths. Fixes: 975d183ef0ca ("net: enetc: Initialize SerDes for SGMII and USXGMII protocols") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22net: qed: Remove unneeded cast from memory allocationWang Hai
Remove casting the values returned by memory allocation function. Coccinelle emits WARNING: casting value returned by memory allocation unction to (struct roce_destroy_qp_req_output_params *) is useless. This issue was detected by using the Coccinelle software. Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22net: phy: fix check in get_phy_c45_idsVladimir Oltean
After the patch below, the iteration through the available MMDs is completely short-circuited, and devs_in_pkg remains set to the initial value of zero. Due to devs_in_pkg being zero, the rest of get_phy_c45_ids() is short-circuited too: the following loop never reaches below this point either (it executes "continue" for every device in package, failing to retrieve PHY ID for any of them): /* Now probe Device Identifiers for each device present. */ for (i = 1; i < num_ids; i++) { if (!(devs_in_pkg & (1 << i))) continue; So c45_ids->device_ids remains populated with zeroes. This causes an Aquantia AQR412 PHY (same as any C45 PHY would, in fact) to be probed by the Generic PHY driver. The issue seems to be a case of submitting partially committed work (and therefore testing something other than was submitted). The intention of the patch was to delay exiting the loop until one more condition is reached (the devs_in_pkg read from hardware is either 0, OR mostly f's). So fix the patch to reflect that. Tested with traffic on a LS1028A-QDS, the PHY is now probed correctly using the Aquantia driver. The devs_in_pkg bit field is set to 0xe000009a, and the MMDs that are present have the following IDs: [ 5.600772] libphy: get_phy_c45_ids: device_ids[1]=0x3a1b662 [ 5.618781] libphy: get_phy_c45_ids: device_ids[3]=0x3a1b662 [ 5.630797] libphy: get_phy_c45_ids: device_ids[4]=0x3a1b662 [ 5.654535] libphy: get_phy_c45_ids: device_ids[7]=0x3a1b662 [ 5.791723] libphy: get_phy_c45_ids: device_ids[29]=0x3a1b662 [ 5.804050] libphy: get_phy_c45_ids: device_ids[30]=0x3a1b662 [ 5.816375] libphy: get_phy_c45_ids: device_ids[31]=0x0 [ 7.690237] mscc_felix 0000:00:00.5: PHY [0.5:00] driver [Aquantia AQR412] (irq=POLL) [ 7.704739] mscc_felix 0000:00:00.5: PHY [0.5:01] driver [Aquantia AQR412] (irq=POLL) [ 7.718918] mscc_felix 0000:00:00.5: PHY [0.5:02] driver [Aquantia AQR412] (irq=POLL) [ 7.733044] mscc_felix 0000:00:00.5: PHY [0.5:03] driver [Aquantia AQR412] (irq=POLL) Fixes: bba238ed037c ("net: phy: continue searching for C45 MMDs even if first returned ffff:ffff") Reported-by: Colin King <colin.king@canonical.com> Reported-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22net: dccp: Add SIOCOUTQ IOCTL support (send buffer fill)Richard Sailer
This adds support for the SIOCOUTQ IOCTL to get the send buffer fill of a DCCP socket, like UDP and TCP sockets already have. Regarding the used data field: DCCP uses per packet sequence numbers, not per byte, so sequence numbers can't be used like in TCP. sk_wmem_queued is not used by DCCP and always 0, even in test on highly congested paths. Therefore this uses sk_wmem_alloc like in UDP. Signed-off-by: Richard Sailer <richard_siegfried@systemli.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22Merge branch 'Add-DSA-yaml-binding'David S. Miller
Kurt Kanzenbach says: ==================== Add DSA yaml binding as discussed [1] [2] it makes sense to add a DSA yaml binding. This is the second version and contains now two ways of specifying the switch ports: Either by "ports" or by "ethernet-ports". That is why the third patch also adjusts the DSA core for it. Tested in combination with the hellcreek.yaml file. Changes since v1: * Use select to not match unrelated switches * Allow ethernet-port(s) * List ethernet-controller properties * Include better description * Let dsa.txt refer to dsa.yaml Thanks, Kurt [1] - https://lkml.kernel.org/netdev/449f0a03-a91d-ae82-b31f-59dfd1457ec5@gmail.com/ [2] - https://lkml.kernel.org/netdev/20200710090618.28945-1-kurt@linutronix.de/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22net: dsa: of: Allow ethernet-ports as encapsulating nodeKurt Kanzenbach
Due to unified Ethernet Switch Device Tree Bindings allow for ethernet-ports as encapsulating node as well. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22dt-bindings: net: dsa: Let dsa.txt refer to dsa.yamlKurt Kanzenbach
The DSA bindings have been converted to YAML. Therefore, the old text style documentation should refer to that one. The text file can be removed completely once all the existing DSA switch bindings have been converted as well. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22dt-bindings: net: dsa: Add DSA yaml bindingKurt Kanzenbach
For future DSA drivers it makes sense to add a generic DSA yaml binding which can be used then. This was created using the properties from dsa.txt. It includes the ports and the dsa,member property. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22net: mscc: ocelot: fix non-initialized CPU port on VSC7514Vladimir Oltean
The VSC7514 is marketed as a 10-port switch, however it has 11 physical ports (0->10) in the block diagram: https://www.microsemi.com/product-directory/ethernet-switches/3992-vsc7514 (also in the device tree at arch/mips/boot/dts/mscc/ocelot.dtsi) Additionally, by architecture it has one more entry in the analyzer block, situated right after the physical ports, for the CPU port module. This is not a physical port, it only represents a channel for frame injection and extraction. That entry for the CPU port is at index 11 in the analyzer. When the register groups for QSYS_SWITCH_PORT_MODE, SYS_PORT_MODE and SYS_PAUSE_CFG are declared to be replicated 11 times, the 11th entry in the array of regfields is not initialized, so the CPU port module is not initialized either. The documentation of QSYS_SWITCH_PORT_MODE for VSC7514 also says that this register group is replicated 12 times, so this patch is simply reflecting that and not introducing any further inconsistency. Fixes: 886e1387c73d ("net: mscc: ocelot: convert QSYS_SWITCH_PORT_MODE and SYS_PORT_MODE to regfields") Fixes: 541132f0961a ("net: mscc: ocelot: convert SYS_PAUSE_CFG register access to regfield") Reported-by: Bryan Whitehead <bryan.whitehead@microchip.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22net: explicitly include <linux/compat.h> in net/core/sock.cChristoph Hellwig
The buildbot found a config where the header isn't already implicitly pulled in, so add an explicit include as well. Fixes: 8c918ffbbad4 ("net: remove compat_sock_common_{get,set}sockopt") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-07-21 The following pull-request contains BPF updates for your *net-next* tree. We've added 46 non-merge commits during the last 6 day(s) which contain a total of 68 files changed, 4929 insertions(+), 526 deletions(-). The main changes are: 1) Run BPF program on socket lookup, from Jakub. 2) Introduce cpumap, from Lorenzo. 3) s390 JIT fixes, from Ilya. 4) teach riscv JIT to emit compressed insns, from Luke. 5) use build time computed BTF ids in bpf iter, from Yonghong. ==================== Purely independent overlapping changes in both filter.h and xdp.h Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21Merge branch 'ionic-updates'David S. Miller
Shannon Nelson says: ==================== ionic updates These are a few odd code tweaks to the ionic driver: FW defined MTU limits, remove unnecessary code, and other tidiness tweaks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21ionic: interface file updatesShannon Nelson
Add some new interface values and update a few more descriptions. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21ionic: rearrange reset and bus-master controlShannon Nelson
We can prevent potential incorrect DMA access attempts from the NIC by enabling bus-master after the reset, and by disabling bus-master earlier in cleanup. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21ionic: update eid test for overflowShannon Nelson
Fix up our comparison to better handle a potential (but largely unlikely) wrap around. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21ionic: remove unused ionic_coal_hw_to_usecShannon Nelson
Clean up some unused code. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21ionic: set netdev default nameShannon Nelson
If the host system's udev fails to set a new name for the network port, there is no NETDEV_CHANGENAME event to trigger the driver to send the name down to the firmware. It is safe to set the lif name multiple times, so we add a call early on to set the default netdev name to be sure the FW has something to use in its internal debug logging. Then when udev gets around to changing it we can update it to the actual name the system will be using. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21ionic: get MTU from lif identityShannon Nelson
Change from using hardcoded MTU limits and instead use the firmware defined limits. The value from the LIF attributes is the frame size, so we take off the header size to convert to MTU size. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21bareudp: Reverted support to enable & disable rx metadata collectionMartin Varghese
The commit fe80536acf83 ("bareudp: Added attribute to enable & disable rx metadata collection") breaks the the original(5.7) default behavior of bareudp module to collect RX metadadata at the receive. It was added to avoid the crash at the kernel neighbour subsytem when packet with metadata from bareudp is processed. But it is no more needed as the commit 394de110a733 ("net: Added pointer check for dst->ops->neigh_lookup in dst_neigh_lookup_skb") solves this crash. Fixes: fe80536acf83 ("bareudp: Added attribute to enable & disable rx metadata collection") Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21Merge branch 'dpaa2-eth-add-support-for-TBF-offload'David S. Miller
Ioana Ciornei says: ==================== dpaa2-eth: add support for TBF offload This patch set adds support for TBF offload in dpaa2-eth. The first patch restructures how the .ndo_setup_tc() callback is implemented (each Qdisc is treated in a separate function), the second patch just adds the necessary APIs for configuring the Tx shaper and the last one is handling TC_SETUP_QDISC_TBF and configures as requested the shaper. ==================== Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21dpaa2-eth: add support for TBF offloadIoana Ciornei
React to TC_SETUP_QDISC_TBF and configure the egress shaper as appropriate with the maximum rate and burst size requested by the user. TBF can only be offloaded on DPAA2 when it's the root qdisc, ie it's a per port shaper. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21dpaa2-eth: add API for Tx shapingIoana Ciornei
Add the necessary API (dpni_set_tx_shaping) for configuring the rate and burst size of a per port shaper in DPAA2. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21dpaa2-eth: move the mqprio setup into a separate functionIoana Ciornei
Move the setup done for MQPRIO into a separate function so that with the addition of another offload we do not crowd dpaa2_eth_setup_tc(). After this restructuring it's easier to see what is supported in terms of Qdisc offloading. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21mptcp: move helper to where its usedFlorian Westphal
Only used in token.c. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21Merge branch 'devlink-small-improvements'David S. Miller
Parav Pandit says: ==================== devlink small improvements This short series improves the devlink code for lock commment, simplifying checks and keeping the scope of mutex lock for necessary fields. Patch summary: Patch-1 Keep the devlink_mutex for only for necessary changes. Patch-2 Avoids duplicate check for reload flag Patch-3 Adds missing comment for the scope of devlink instance lock Patch-4 Constify devlink instance pointer ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21devlink: Constify devlink instance pointerParav Pandit
Constify devlink instance pointer while checking if reload operation is supported or not. This helps to review the scope of checks done in reload. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-24 12:12:23 +0000