summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-28Merge tag 'drm-intel-fixes-2020-08-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.9-rc3: - Fix command parser desc matching with masks Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87imd45ufw.fsf@intel.com
2020-08-28Merge tag 'drm-misc-fixes-2020-08-26' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v5.9-rc2: - Take modeset bkl for legacy drivers. - Allow null crtc in dp_mst. - Omap locking state fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7af1e52a-27de-8edc-d0b2-e23b01e8bc96@linux.intel.com
2020-08-28ARM: versatile: Remove Integrator and Realview from PHYS_OFFSETLinus Walleij
Both Integrator and Realview exclusively use ARM_PATCH_PHYS_VIRT these days so drop them from the PHYS_OFFSET Kconfig option. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200814154529.3487163-1-linus.walleij@linaro.org
2020-08-27io_uring: don't bounce block based -EAGAIN retry off task_workJens Axboe
These events happen inline from submission, so there's no need to bounce them through the original task. Just set them up for retry and issue retry directly instead of going over task_work. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-27io_uring: fix IOPOLL -EAGAIN retriesJens Axboe
This normally isn't hit, as polling is mostly done on NVMe with deep queue depths. But if we do run into request starvation, we need to ensure that retries are properly serialized. Reported-by: Andres Freund <andres@anarazel.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-27arm64/cpuinfo: Remove unnecessary fallthrough annotationGustavo A. R. Silva
Fallthrough annotations for consecutive default and case labels are not necessary. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-27media: dib0700: Fix identation issue in dib8096_set_param_override()Gustavo A. R. Silva
Fix identation issues. Fixes: 5e9c85d98337 ("[media] dib8096: enhancement") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-27hwmon: (gsc-hwmon) Scale temperature to millidegreesTim Harvey
The GSC registers report temperature in decidegrees celcius so we need to scale it to represent the hwmon sysfs API of millidegrees. Cc: stable@vger.kernel.org Fixes: 3bce5377ef66 ("hwmon: Add Gateworks System Controller support") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Link: https://lore.kernel.org/r/1598548824-16898-1-git-send-email-tharvey@gateworks.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-08-27afs: Remove erroneous fallthough annotationDan Carpenter
The fall through annotation comes after a return statement so it's not reachable. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-27EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register()Shiju Jose
After b9cae27728d1 ("EDAC/ghes: Scan the system once on driver init") and with CONFIG_DEBUG_TEST_DRIVER_REMOVE enabled, ghes_hw.dimms becomes a NULL pointer after the second ->probe() (aka ghes_edac_register()) which the config option causes to be called. This happens because the static variable which holds down whether the system has been scanned already, doesn't get reset in ghes_edac_unregister(). Then, on the second probe, ghes_scan_system() doesn't get to enumerate the DIMMs, leading to ghes_hw.dimms remaining NULL. Clear the variable and rename it to something more descriptive so that a second probe succeeds. [ bp: Rewrite commit message. ] Fixes: b9cae27728d1 ("EDAC/ghes: Scan the system once on driver init") Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200827140450.1620-1-shiju.jose@huawei.com
2020-08-27crypto: af_alg - Work around empty control messages without MSG_MOREHerbert Xu
The iwd daemon uses libell which sets up the skcipher operation with two separate control messages. As the first control message is sent without MSG_MORE, it is interpreted as an empty request. While libell should be fixed to use MSG_MORE where appropriate, this patch works around the bug in the kernel so that existing binaries continue to work. We will print a warning however. A separate issue is that the new kernel code no longer allows the control message to be sent twice within the same request. This restriction is obviously incompatible with what iwd was doing (first setting an IV and then sending the real control message). This patch changes the kernel so that this is explicitly allowed. Reported-by: Caleb Jorden <caljorden@hotmail.com> Fixes: f3c802a1f300 ("crypto: algif_aead - Only wake up when...") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-08-27cpufreq: Use WARN_ON_ONCE() for invalid relationViresh Kumar
The relation can't be invalid here, so if it turns out to be invalid, just WARN_ON_ONCE() and return 0. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-08-27cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq()Viresh Kumar
"cpufreq_driver" is guaranteed to be valid here, no need to check it here. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-08-27Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check"Pratik Rajesh Sampat
cpuidle stop state implementation has minor optimizations for P10 where hardware preserves more SPR registers compared to P9. The current P9 driver works for P10, although does few extra save-restores. P9 driver can provide the required power management features like SMT thread folding and core level power savings on a P10 platform. Until the P10 stop driver is available, revert the commit which allows for only P9 systems to utilize cpuidle and blocks all idle stop states for P10. CPU idle states are enabled and tested on the P10 platform with this fix. This reverts commit 8747bf36f312356f8a295a0c39ff092d65ce75ae. Fixes: 8747bf36f312 ("powerpc/powernv/idle: Replace CPU feature check with PVR check") Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com> Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200826082918.89306-1-psampat@linux.ibm.com
2020-08-27powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imcAthira Rajeev
IMC trace-mode uses MSR[HV/PR] bits to set the cpumode for the instruction pointer captured in each sample. The bits are fetched from the third double word of the trace record. Reading third double word from IMC trace record should use be64_to_cpu() along with READ_ONCE inorder to fetch correct MSR[HV/PR] bits. Patch addresses this change. Currently we are using PERF_RECORD_MISC_HYPERVISOR as cpumode if MSR HV is 1 and PR is 0 which means the address is from host counter. But using PERF_RECORD_MISC_HYPERVISOR for host counter data will fail to resolve the address -> symbol during "perf report" because perf tools side uses PERF_RECORD_MISC_KERNEL to represent the host counter data. Therefore, fix the trace imc sample data to use PERF_RECORD_MISC_KERNEL as cpumode for host kernel information. Fixes: 77ca3951cc37 ("powerpc/perf: Add kernel support for new MSR[HV PR] bits in trace-imc") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1598424029-1662-1-git-send-email-atrajeev@linux.vnet.ibm.com
2020-08-27powerpc/perf: Fix crashes with generic_compat_pmu & BHRBAlexey Kardashevskiy
The bhrb_filter_map ("The Branch History Rolling Buffer") callback is only defined in raw CPUs' power_pmu structs. The "architected" CPUs use generic_compat_pmu, which does not have this callback, and crashes occur if a user tries to enable branch stack for an event. This add a NULL pointer check for bhrb_filter_map() which behaves as if the callback returned an error. This does not add the same check for config_bhrb() as the only caller checks for cpuhw->bhrb_users which remains zero if bhrb_filter_map==0. Fixes: be80e758d0c2 ("powerpc/perf: Add generic compat mode pmu driver") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200602025612.62707-1-aik@ozlabs.ru
2020-08-27powerpc/64s: Fix crash in load_fp_state() due to fpexc_modeMichael Ellerman
The recent commit 01eb01877f33 ("powerpc/64s: Fix restore_math unnecessarily changing MSR") changed some of the handling of floating point/vector restore. In particular it caused current->thread.fpexc_mode to be copied into the current MSR (via msr_check_and_set()), rather than just into regs->msr (which is moved into MSR on return to userspace). This can lead to a crash in the kernel if we take a floating point exception when restoring FPSCR: Oops: Exception in kernel mode, sig: 8 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 3 PID: 101213 Comm: ld64.so.2 Not tainted 5.9.0-rc1-00098-g18445bf405cb-dirty #9 NIP: c00000000000fbb4 LR: c00000000001a7ac CTR: c000000000183570 REGS: c0000016b7cfb3b0 TRAP: 0700 Not tainted (5.9.0-rc1-00098-g18445bf405cb-dirty) MSR: 900000000290b933 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 44002444 XER: 00000000 CFAR: c00000000001a7a8 IRQMASK: 1 GPR00: c00000000001ae40 c0000016b7cfb640 c0000000011b7f00 c000001542a0f740 GPR04: c000001542a0f720 c000001542a0eb00 0000000000000900 c000001542a0eb00 GPR08: 000000000000000a 0000000000002000 9000000000009033 0000000000000000 GPR12: 0000000000004000 c0000017ffffd900 0000000000000001 c000000000df5a58 GPR16: c000000000e19c18 c0000000010e1123 0000000000000001 c000000000e1a638 GPR20: 0000000000000000 c0000000044b1d00 0000000000000000 c000001542a0f2a0 GPR24: 00000016c7fe0000 c000001542a0f720 c000000001c93da0 c000000000fe5f28 GPR28: c000001542a0f720 0000000000800000 c0000016b7cfbe90 0000000002802900 NIP load_fp_state+0x4/0x214 LR restore_math+0x17c/0x1f0 Call Trace: 0xc0000016b7cfb680 (unreliable) __switch_to+0x330/0x460 __schedule+0x318/0x920 schedule+0x74/0x140 schedule_timeout+0x318/0x3f0 wait_for_completion+0xc8/0x210 call_usermodehelper_exec+0x234/0x280 do_coredump+0xedc/0x13c0 get_signal+0x1d4/0xbe0 do_notify_resume+0x1a0/0x490 interrupt_exit_user_prepare+0x1c4/0x230 interrupt_return+0x14/0x1c0 Instruction dump: ebe10168 e88101a0 7c8ff120 382101e0 e8010010 7c0803a6 4e800020 790605c4 782905c4 7c0008a8 7c0008a8 c8030200 <fffe058e> 48000088 c8030000 c8230010 Fix it by only loading the fpexc_mode value into regs->msr. Also add a comment to explain that although VSX is subject to the value of fpexc_mode, we don't have to handle that separately because we only allow VSX to be enabled if FP is also enabled. Fixes: 01eb01877f33 ("powerpc/64s: Fix restore_math unnecessarily changing MSR") Reported-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Link: https://lore.kernel.org/r/20200825093424.3967813-1-mpe@ellerman.id.au
2020-08-27powerpc/64s: scv entry should set PPRNicholas Piggin
Kernel entry sets PPR to HMT_MEDIUM by convention. The scv entry path missed this. Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200825075309.224184-1-npiggin@gmail.com
2020-08-27Documentation/powerpc: fix malformed table in syscall64-abiRandy Dunlap
Fix malformed table warning in powerpc/syscall64-abi.rst by making two tables and moving the headings. Documentation/powerpc/syscall64-abi.rst:53: WARNING: Malformed table. Text in column margin in table line 2. =========== ============= ======================================== --- For the sc instruction, differences with the ELF ABI --- r0 Volatile (System call number.) r3 Volatile (Parameter 1, and return value.) r4-r8 Volatile (Parameters 2-6.) cr0 Volatile (cr0.SO is the return error condition.) cr1, cr5-7 Nonvolatile lr Nonvolatile --- For the scv 0 instruction, differences with the ELF ABI --- r0 Volatile (System call number.) r3 Volatile (Parameter 1, and return value.) r4-r8 Volatile (Parameters 2-6.) =========== ============= ======================================== Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/e06de4d3-a36f-2745-9775-467e125436cc@infradead.org
2020-08-27video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=nMichael Ellerman
The build is currently broken, if COMPILE_TEST=y and PPC_PMAC=n: linux/drivers/video/fbdev/controlfb.c: In function ‘control_set_hardware’: linux/drivers/video/fbdev/controlfb.c:276:2: error: implicit declaration of function ‘btext_update_display’ 276 | btext_update_display(p->frame_buffer_phys + CTRLFB_OFF, | ^~~~~~~~~~~~~~~~~~~~ Fix it by including btext.h whenever CONFIG_BOOTX_TEXT is enabled. Fixes: a07a63b0e24d ("video: fbdev: controlfb: add COMPILE_TEST support") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://lore.kernel.org/r/20200821104910.3363818-1-mpe@ellerman.id.au
2020-08-27x86/irq: Unbreak interrupt affinity settingThomas Gleixner
Several people reported that 5.8 broke the interrupt affinity setting mechanism. The consolidation of the entry code reused the regular exception entry code for device interrupts and changed the way how the vector number is conveyed from ptregs->orig_ax to a function argument. The low level entry uses the hardware error code slot to push the vector number onto the stack which is retrieved from there into a function argument and the slot on stack is set to -1. The reason for setting it to -1 is that the error code slot is at the position where pt_regs::orig_ax is. A positive value in pt_regs::orig_ax indicates that the entry came via a syscall. If it's not set to a negative value then a signal delivery on return to userspace would try to restart a syscall. But there are other places which rely on pt_regs::orig_ax being a valid indicator for syscall entry. But setting pt_regs::orig_ax to -1 has a nasty side effect vs. the interrupt affinity setting mechanism, which was overlooked when this change was made. Moving interrupts on x86 happens in several steps. A new vector on a different CPU is allocated and the relevant interrupt source is reprogrammed to that. But that's racy and there might be an interrupt already in flight to the old vector. So the old vector is preserved until the first interrupt arrives on the new vector and the new target CPU. Once that happens the old vector is cleaned up, but this cleanup still depends on the vector number being stored in pt_regs::orig_ax, which is now -1. That -1 makes the check for cleanup: pt_regs::orig_ax == new_vector always false. As a consequence the interrupt is moved once, but then it cannot be moved anymore because the cleanup of the old vector never happens. There would be several ways to convey the vector information to that place in the guts of the interrupt handling, but on deeper inspection it turned out that this check is pointless and a leftover from the old affinity model of X86 which supported multi-CPU affinities. Under this model it was possible that an interrupt had an old and a new vector on the same CPU, so the vector match was required. Under the new model the effective affinity of an interrupt is always a single CPU from the requested affinity mask. If the affinity mask changes then either the interrupt stays on the CPU and on the same vector when that CPU is still in the new affinity mask or it is moved to a different CPU, but it is never moved to a different vector on the same CPU. Ergo the cleanup check for the matching vector number is not required and can be removed which makes the dependency on pt_regs:orig_ax go away. The remaining check for new_cpu == smp_processsor_id() is completely sufficient. If it matches then the interrupt was successfully migrated and the cleanup can proceed. For paranoia sake add a warning into the vector assignment code to validate that the assumption of never moving to a different vector on the same CPU holds. Fixes: 633260fa143 ("x86/irq: Convey vector as argument and not in ptregs") Reported-by: Alex bykov <alex.bykov@scylladb.com> Reported-by: Avi Kivity <avi@scylladb.com> Reported-by: Alexander Graf <graf@amazon.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexander Graf <graf@amazon.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87wo1ltaxz.fsf@nanos.tec.linutronix.de
2020-08-27x86/hotplug: Silence APIC only after all interrupts are migratedAshok Raj
There is a race when taking a CPU offline. Current code looks like this: native_cpu_disable() { ... apic_soft_disable(); /* * Any existing set bits for pending interrupt to * this CPU are preserved and will be sent via IPI * to another CPU by fixup_irqs(). */ cpu_disable_common(); { .... /* * Race window happens here. Once local APIC has been * disabled any new interrupts from the device to * the old CPU are lost */ fixup_irqs(); // Too late to capture anything in IRR. ... } } The fix is to disable the APIC *after* cpu_disable_common(). Testing was done with a USB NIC that provided a source of frequent interrupts. A script migrated interrupts to a specific CPU and then took that CPU offline. Fixes: 60dcaad5736f ("x86/hotplug: Silence APIC and NMI when CPU is dead") Reported-by: Evan Green <evgreen@chromium.org> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by: Evan Green <evgreen@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/875zdarr4h.fsf@nanos.tec.linutronix.de/ Link: https://lore.kernel.org/r/1598501530-45821-1-git-send-email-ashok.raj@intel.com
2020-08-27USB: Ignore UAS for JMicron JMS567 ATA/ATAPI BridgeCyril Roelandt
This device does not support UAS properly and a similar entry already exists in drivers/usb/storage/unusual_uas.h. Without this patch, storage_probe() defers the handling of this device to UAS, which cannot handle it either. Tested-by: Brice Goglin <brice.goglin@gmail.com> Fixes: bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron SATA enclosure") Acked-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Link: https://lore.kernel.org/r/20200825212231.46309-1-tipecaml@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-27usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe()Tang Bin
If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ohci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 62194244cf87 ("USB: Add Samsung Exynos OHCI diver") Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200826144931.1828-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-27USB: gadget: u_f: Unbreak offset calculation in VLAsAndy Shevchenko
Inadvertently the commit b1cd1b65afba ("USB: gadget: u_f: add overflow checks to VLA macros") makes VLA macros to always return 0 due to different scope of two variables of the same name. Obviously we need to have only one. Fixes: b1cd1b65afba ("USB: gadget: u_f: add overflow checks to VLA macros") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Brooke Basile <brookebasile@gmail.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20200826192119.56450-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-27USB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-DAlan Stern
The Sound Devices MixPre-D audio card suffers from the same defect as the Sound Devices USBPre2: an endpoint shared between a normal audio interface and a vendor-specific interface, in violation of the USB spec. Since the USB core now treats duplicated endpoints as bugs and ignores them, the audio endpoint isn't available and the card can't be used for audio capture. Along the same lines as commit bdd1b147b802 ("USB: quirks: blacklist duplicate ep on Sound Devices USBPre2"), this patch adds a quirks entry saying to ignore ep5in for interface 1, leaving it available for use with standard audio interface 2. Reported-and-tested-by: Jean-Christophe Barnoud <jcbarnoud@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Fixes: 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") Link: https://lore.kernel.org/r/20200826194624.GA412633@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-27dma-pool: Fix an uninitialized variable bug in atomic_pool_expand()Dan Carpenter
The "page" pointer can be used with out being initialized. Fixes: d7e673ec2c8e ("dma-pool: Only allocate from CMA when in same memory zone") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-08-27arm/xen: Add misuse warning to virt_to_gfnSimon Leiner
As virt_to_gfn uses virt_to_phys, it will return invalid addresses when used with vmalloc'd addresses. This patch introduces a warning, when virt_to_gfn is used in this way. Signed-off-by: Simon Leiner <simon@leiner.me> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20200825093153.35500-2-simon@leiner.me Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-27xen/xenbus: Fix granting of vmalloc'd memorySimon Leiner
On some architectures (like ARM), virt_to_gfn cannot be used for vmalloc'd memory because of its reliance on virt_to_phys. This patch introduces a check for vmalloc'd addresses and obtains the PFN using vmalloc_to_pfn in that case. Signed-off-by: Simon Leiner <simon@leiner.me> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20200825093153.35500-1-simon@leiner.me Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-27XEN uses irqdesc::irq_data_common::handler_data to store a per interruptThomas Gleixner
XEN data pointer which contains XEN specific information. handler data is meant for interrupt handlers and not for storing irq chip specific information as some devices require handler data to store internal per interrupt information, e.g. pinctrl/GPIO chained interrupt handlers. This obviously creates a conflict of interests and crashes the machine because the XEN pointer is overwritten by the driver pointer. As the XEN data is not handler specific it should be stored in irqdesc::irq_data::chip_data instead. A simple sed s/irq_[sg]et_handler_data/irq_[sg]et_chip_data/ cures that. Cc: stable@vger.kernel.org Reported-by: Roman Shaposhnik <roman@zededa.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Roman Shaposhnik <roman@zededa.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/87lfi2yckt.fsf@nanos.tec.linutronix.de Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-27Merge tag 'amd-drm-fixes-5.9-2020-08-26' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-08-26: amdgpu: - Misc display fixes - Backlight fixes - MPO fix for DCN1 - Fixes for Sienna Cichlid - Fixes for Navy Flounder - Vega SW CTF fixes - SMU fix for Raven - Fix a possible overflow in INFO ioctl - Gfx10 clockgating fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826200801.17735-1-alexander.deucher@amd.com
2020-08-27Merge tag 'drm-msm-fixes-2020-08-24' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Some fixes for v5.9 plus the one opp/bandwidth scaling patch ("drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR") which was not included in the initial pull due to dependency on patch landing thru OPP tree Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGt45A4ObyhEdC5Ga4f4cAf-NBSVRECu7df3Gh6-X4G3tQ@mail.gmail.com
2020-08-27Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux ↵Dave Airlie
into drm-fixes Two fixes: One fixes a bad interaction with the DRM scheduler, leading to some dma fences not getting signalled after hitting the job timeout. The other one fixes a GPU init regression, as apparently one old core doesn't likes us reading some of the identification registers. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/aceebfe3af636346f5252bdf727cdd988bdcbdf2.camel@pengutronix.de
2020-08-27Merge tag 'exynos-drm-fixes-v5.9-rc3' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes One fixup - Just drop __iommu annotation to fix sparse warning. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <daeinki@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826071520.3140-1-daeinki@gmail.com
2020-08-26io_uring: clear req->result on IOPOLL re-issueJens Axboe
Make sure we clear req->result, which was set to -EAGAIN for retry purposes, when moving it to the reissue list. Otherwise we can end up retrying a request more than once, which leads to weird results in the io-wq handling (and other spots). Cc: stable@vger.kernel.org Reported-by: Andres Freund <andres@anarazel.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-26drm/amd/display: Fix memleak in amdgpu_dm_mode_config_initDinghao Liu
When amdgpu_display_modeset_create_props() fails, state and state->context should be freed to prevent memleak. It's the same when amdgpu_dm_audio_init() fails. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amdgpu: disable runtime pm for navy_flounderJiansong Chen
Disable runtime pm for navy_flounder temporarily. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Retry AUX write when fail occursWayne Lin
[Why] In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We suppose every write wil get done successfully and hence some AUX commands might not sent out indeed. [How] Check if AUX_WR success. If not, retry it. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amdgpu: Fix buffer overflow in INFO ioctlAlex Deucher
The values for "se_num" and "sh_num" come from the user in the ioctl. They can be in the 0-255 range but if they're more than AMDGPU_GFX_MAX_SE (4) or AMDGPU_GFX_MAX_SH_PER_SE (2) then it results in an out of bounds read. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amd/powerplay: Fix hardmins not being sent to SMU for RVNicholas Kazlauskas
[Why] DC uses these to raise the voltage as needed for higher dispclk/dppclk and to ensure that we have enough bandwidth to drive the displays. There's a bug preventing these from actuially sending messages since it's checking the actual clock (which is 0) instead of the incoming clock (which shouldn't be 0) when deciding to send the hardmin. [How] Check the clocks != 0 instead of the actual clocks. Fixes: 9ed9203c3ee7 ("drm/amd/powerplay: rv dal-pplib interface refactor powerplay part") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amdgpu: use MODE1 reset for navy_flounder by defaultJiansong Chen
Switch default gpu reset method to MODE1 for navy_flounder. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/pm: correct the thermal alert temperature limit settingsEvan Quan
Do the maths in celsius degree. This can fix the issues caused by the changes below: drm/amd/pm: correct Vega20 swctf limit setting drm/amd/pm: correct Vega12 swctf limit setting drm/amd/pm: correct Vega10 swctf limit setting Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amdgpu: add asd fw check before loading asdTao Zhou
asd is not ready for some ASICs in early stage, and psp->asd_fw is more generic than ASIC name in the check. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Keep current gain when ABM disable immediatelyBrandon Syu
[Why] When system enters s3/s0i3, backlight PWM would set user level. [How] ABM disable function add keep current gain to avoid it. Signed-off-by: Brandon Syu <Brandon.Syu@amd.com> Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulationSamson Tam
[Why] dongle_type is set during dongle connection but for passive dongles, dongle_type is not set. If user starts with an active dongle and then switches to a passive dongle, it will still report as an active dongle. Trying to emulate the wrong connecter type results in display not lighting up. [How] Set dpcd_caps.dongle_type for passive dongles in detect_dp(). Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Revert HDCP disable sequence changeJaehyun Chung
[Why] Revert HDCP disable sequence change that blanks stream before disabling HDCP. PSP and HW teams are currently investigating the root cause of why HDCP cannot be disabled before stream blank, which is expected to work without issues. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Send DISPLAY_OFF after power down on bootSung Lee
[WHY] update_clocks might not be called on headless adapters. This means DISPLAY_OFF may not be sent in headless cases. [HOW] If hardware is powered down on boot because it is headless (mode set does not happen on that adapter) also send DISPLAY_OFF notification. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amdgpu/gfx10: refine mgcg settingJiansong Chen
1. enable ENABLE_CGTS_LEGACY to fix specviewperf11 random hang. 2. remove obsolete RLC_CGTT_SCLK_OVERRIDE workaround. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amd/pm: correct Vega20 swctf limit settingEvan Quan
Correct the Vega20 thermal swctf limit. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amd/pm: correct Vega12 swctf limit settingEvan Quan
Correct the Vega12 thermal swctf limit. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 19:54:48 +0000