summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-05Merge tag 'drm-fixes-2021-02-05-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Fixes for rc7, bit bigger than I'd like at this stage, but most of the i915 stuff and some amdgpu is destined for staging and I'd rather not hold it up, the i915 changes also pulled in a few precusor code movement patches to make things cleaner, but nothing seems that horrible, and I've checked over all of it. Otherwise there is a nouveau dma-api warning regression, and a ttm page allocation warning fix, and some fixes for a bridge chip, ttm: - fix huge page warning regression i915: - Skip vswing programming for TBT - Power up combo PHY lanes for HDMI - Fix double YUV range correction on HDR planes - Fix the MST PBN divider calculation - Fix LTTPR vswing/pre-emp setting in non-transparent mode - Move the breadcrumb to the signaler if completed upon cancel - Close race between enable_breadcrumbs and cancel_breadcrumbs - Drop lru bumping on display unpinning amdgpu: - Fix retry in gem create - Vangogh fixes - Fix for display from shared buffers - Various display fixes amdkfd: - Fix regression in buffer free nouveau: - fix DMA API warning regression drm/bridge/lontium-lt9611uxc: - EDID fixes - Don't handle hotplug events in IRQ handler" * tag 'drm-fixes-2021-02-05-1' of git://anongit.freedesktop.org/drm/drm: (29 commits) drm/nouveau: fix dma syncing warning with debugging on. drm/amd/display: Decrement refcount of dc_sink before reassignment drm/amd/display: Free atomic state after drm_atomic_commit drm/amd/display: Fix dc_sink kref count in emulated_link_detect drm/amd/display: Release DSC before acquiring drm/amd/display: Revert "Fix EDID parsing after resume from suspend" drm/amd/display: Add more Clock Sources to DCN2.1 drm/amd/display: reuse current context instead of recreating one drm/amd/display: Fix DPCD translation for LTTPR AUX_RD_INTERVAL drm/amdgpu: enable freesync for A+A configs drm/amd/pm: fill in the data member of v2 gpu metrics table for vangogh drm/amdgpu/gfx10: update CGTS_TCC_DISABLE and CGTS_USER_TCC_DISABLE register offsets for VGH drm/amdkfd: fix null pointer panic while free buffer in kfd drm/amdgpu: fix the issue that retry constantly once the buffer is oversize drm/i915/dp: Fix LTTPR vswing/pre-emp setting in non-transparent mode drm/i915/dp: Move intel_dp_set_signal_levels() to intel_dp_link_training.c drm/i915: Fix the MST PBN divider calculation drm/dp/mst: Export drm_dp_get_vc_payload_bw() drm/i915/gem: Drop lru bumping on display unpinning drm/i915/gt: Close race between enable_breadcrumbs and cancel_breadcrumbs ...
2021-02-05ntp: Use freezable workqueue for RTC synchronizationGeert Uytterhoeven
The bug fixed by commit e3fab2f3de081e98 ("ntp: Fix RTC synchronization on 32-bit platforms") revealed an underlying issue: RTC synchronization may happen anytime, even while the system is partially suspended. On systems where the RTC is connected to an I2C bus, the I2C bus controller may already or still be suspended, triggering a WARNING during suspend or resume from s2ram: WARNING: CPU: 0 PID: 124 at drivers/i2c/i2c-core.h:54 __i2c_transfer+0x634/0x680 i2c i2c-6: Transfer while suspended [...] Workqueue: events_power_efficient sync_hw_clock [...] (__i2c_transfer) (i2c_transfer) (regmap_i2c_read) ... (da9063_rtc_set_time) (rtc_set_time) (sync_hw_clock) (process_one_work) Fix this race condition by using the freezable instead of the normal power-efficient workqueue. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20210125143039.1051912-1-geert+renesas@glider.be
2021-02-05vdpa/mlx5: Restore the hardware used index after change mapEli Cohen
When a change of memory map occurs, the hardware resources are destroyed and then re-created again with the new memory map. In such case, we need to restore the hardware available and used indices. The driver failed to restore the used index which is added here. Also, since the driver also fails to reset the available and used indices upon device reset, fix this here to avoid regression caused by the fact that used index may not be zero upon device reset. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210204073618.36336-1-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-02-05smb3: fix crediting for compounding when only one request in flightPavel Shilovsky
Currently we try to guess if a compound request is going to succeed waiting for credits or not based on the number of requests in flight. This approach doesn't work correctly all the time because there may be only one request in flight which is going to bring multiple credits satisfying the compound request. Change the behavior to fail a request only if there are no requests in flight at all and proceed waiting for credits otherwise. Cc: <stable@vger.kernel.org> # 5.1+ Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Tom Talpey <tom@talpey.com> Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-02-05dma-mapping: benchmark: use u8 for reserved field in uAPI structureBarry Song
The original code put five u32 before a u64 expansion[10] array. Five is odd, this will cause trouble in the extension of the structure by adding new features. This patch moves to use u8 for reserved field to avoid future alignment risk. Meanwhile, it also clears the memory of struct map_benchmark in tools, otherwise, if users use old version to run on newer kernel, the random expansion value will cause side effect on newer kernel. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-05ARM: kexec: fix oops after TLB are invalidatedRussell King
Giancarlo Ferrari reports the following oops while trying to use kexec: Unable to handle kernel paging request at virtual address 80112f38 pgd = fd7ef03e [80112f38] *pgd=0001141e(bad) Internal error: Oops: 80d [#1] PREEMPT SMP ARM ... This is caused by machine_kexec() trying to set the kernel text to be read/write, so it can poke values into the relocation code before copying it - and an interrupt occuring which changes the page tables. The subsequent writes then hit read-only sections that trigger a data abort resulting in the above oops. Fix this by copying the relocation code, and then writing the variables into the destination, thereby avoiding the need to make the kernel text read/write. Reported-by: Giancarlo Ferrari <giancarlo.ferrari89@gmail.com> Tested-by: Giancarlo Ferrari <giancarlo.ferrari89@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-02-05ARM: ensure the signal page contains defined contentsRussell King
Ensure that the signal page contains our poison instruction to increase the protection against ROP attacks and also contains well defined contents. Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-02-05usb: dwc2: Fix endpoint direction check in ep_from_windexHeiko Stuebner
dwc2_hsotg_process_req_status uses ep_from_windex() to retrieve the endpoint for the index provided in the wIndex request param. In a test-case with a rndis gadget running and sending a malformed packet to it like: dev.ctrl_transfer( 0x82, # bmRequestType 0x00, # bRequest 0x0000, # wValue 0x0001, # wIndex 0x00 # wLength ) it is possible to cause a crash: [ 217.533022] dwc2 ff300000.usb: dwc2_hsotg_process_req_status: USB_REQ_GET_STATUS [ 217.559003] Unable to handle kernel read from unreadable memory at virtual address 0000000000000088 ... [ 218.313189] Call trace: [ 218.330217] ep_from_windex+0x3c/0x54 [ 218.348565] usb_gadget_giveback_request+0x10/0x20 [ 218.368056] dwc2_hsotg_complete_request+0x144/0x184 This happens because ep_from_windex wants to compare the endpoint direction even if index_to_ep() didn't return an endpoint due to the direction not matching. The fix is easy insofar that the actual direction check is already happening when calling index_to_ep() which will return NULL if there is no endpoint for the targeted direction, so the offending check can go away completely. Fixes: c6f5c050e2a7 ("usb: dwc2: gadget: add bi-directional endpoint support") Cc: stable@vger.kernel.org Reported-by: Gerhard Klostermeier <gerhard.klostermeier@syss.de> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20210127103919.58215-1-heiko@sntech.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-05usb: dwc3: fix clock issue during resume in OTG modeGary Bisson
Commit fe8abf332b8f ("usb: dwc3: support clocks and resets for DWC3 core") introduced clock support and a new function named dwc3_core_init_for_resume() which enables the clock before calling dwc3_core_init() during resume as clocks get disabled during suspend. Unfortunately in this commit the DWC3_GCTL_PRTCAP_OTG case was forgotten and therefore during resume, a platform could call dwc3_core_init() without re-enabling the clocks first, preventing to resume properly. So update the resume path to call dwc3_core_init_for_resume() as it should. Fixes: fe8abf332b8f ("usb: dwc3: support clocks and resets for DWC3 core") Cc: stable@vger.kernel.org Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Link: https://lore.kernel.org/r/20210125161934.527820-1-gary.bisson@boundarydevices.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-05kallsyms: fix nonconverging kallsyms table with lldArnd Bergmann
ARM randconfig builds with lld sometimes show a build failure from kallsyms: Inconsistent kallsyms data Try make KALLSYMS_EXTRA_PASS=1 as a workaround The problem is the veneers/thunks getting added by the linker extend the symbol table, which in turn leads to more veneers being needed, so it may take a few extra iterations to converge. This bug has been fixed multiple times before, but comes back every time a new symbol name is used. lld uses a different set of identifiers from ld.bfd, so the additional ones need to be added as well. I looked through the sources and found that arm64 and mips define similar prefixes, so I'm adding those as well, aside from the ones I observed. I'm not sure about powerpc64, which seems to already be handled through a section match, but if it comes back, the "__long_branch_" and "__plt_" prefixes would have to get added as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-02-05kbuild: fix duplicated flags in DEBUG_CFLAGSMasahiro Yamada
Sedat Dilek noticed duplicated flags in DEBUG_CFLAGS when building deb-pkg with CONFIG_DEBUG_INFO. For example, 'make CC=clang bindeb-pkg' reproduces the issue. Kbuild recurses to the top Makefile for some targets such as package builds. With commit 121c5d08d53c ("kbuild: Only add -fno-var-tracking-assignments for old GCC versions") applied, DEBUG_CFLAGS is now reset only when CONFIG_CC_IS_GCC=y. Fix it to reset DEBUG_CFLAGS all the time. Fixes: 121c5d08d53c ("kbuild: Only add -fno-var-tracking-assignments for old GCC versions") Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: Mark Wielaard <mark@klomp.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2021-02-05Merge tag 'drm-intel-fixes-2021-02-04' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.11-rc7: - Skip vswing programming for TBT - Power up combo PHY lanes for HDMI - Fix double YUV range correction on HDR planes - Fix the MST PBN divider calculation - Fix LTTPR vswing/pre-emp setting in non-transparent mode - Move the breadcrumb to the signaler if completed upon cancel - Close race between enable_breadcrumbs and cancel_breadcrumbs - Drop lru bumping on display unpinning Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87bld0f36b.fsf@intel.com
2021-02-04Merge tag 'pci-v5.11-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Revert ASPM suspend/resume fix that regressed NVMe devices (Bjorn Helgaas)" * tag 'pci-v5.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI/ASPM: Save/restore L1SS Capability for suspend/resume"
2021-02-05Merge tag 'amd-drm-fixes-5.11-2021-02-03' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.11-2021-02-03: amdgpu: - Fix retry in gem create - Vangogh fixes - Fix for display from shared buffers - Various display fixes amdkfd: - Fix regression in buffer free Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210204041300.4425-1-alexander.deucher@amd.com
2021-02-04io_uring: drop mm/files between task_work_submitPavel Begunkov
Since SQPOLL task can be shared and so task_work entries can be a mix of them, we need to drop mm and files before trying to issue next request. Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-04x86/apic: Add extra serialization for non-serializing MSRsDave Hansen
Jan Kiszka reported that the x2apic_wrmsr_fence() function uses a plain MFENCE while the Intel SDM (10.12.3 MSR Access in x2APIC Mode) calls for MFENCE; LFENCE. Short summary: we have special MSRs that have weaker ordering than all the rest. Add fencing consistent with current SDM recommendations. This is not known to cause any issues in practice, only in theory. Longer story below: The reason the kernel uses a different semantic is that the SDM changed (roughly in late 2017). The SDM changed because folks at Intel were auditing all of the recommended fences in the SDM and realized that the x2apic fences were insufficient. Why was the pain MFENCE judged insufficient? WRMSR itself is normally a serializing instruction. No fences are needed because the instruction itself serializes everything. But, there are explicit exceptions for this serializing behavior written into the WRMSR instruction documentation for two classes of MSRs: IA32_TSC_DEADLINE and the X2APIC MSRs. Back to x2apic: WRMSR is *not* serializing in this specific case. But why is MFENCE insufficient? MFENCE makes writes visible, but only affects load/store instructions. WRMSR is unfortunately not a load/store instruction and is unaffected by MFENCE. This means that a non-serializing WRMSR could be reordered by the CPU to execute before the writes made visible by the MFENCE have even occurred in the first place. This means that an x2apic IPI could theoretically be triggered before there is any (visible) data to process. Does this affect anything in practice? I honestly don't know. It seems quite possible that by the time an interrupt gets to consume the (not yet) MFENCE'd data, it has become visible, mostly by accident. To be safe, add the SDM-recommended fences for all x2apic WRMSRs. This also leaves open the question of the _other_ weakly-ordered WRMSR: MSR_IA32_TSC_DEADLINE. While it has the same ordering architecture as the x2APIC MSRs, it seems substantially less likely to be a problem in practice. While writes to the in-memory Local Vector Table (LVT) might theoretically be reordered with respect to a weakly-ordered WRMSR like TSC_DEADLINE, the SDM has this to say: In x2APIC mode, the WRMSR instruction is used to write to the LVT entry. The processor ensures the ordering of this write and any subsequent WRMSR to the deadline; no fencing is required. But, that might still leave xAPIC exposed. The safest thing to do for now is to add the extra, recommended LFENCE. [ bp: Massage commit message, fix typos, drop accidentally added newline to tools/arch/x86/include/asm/barrier.h. ] Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200305174708.F77040DD@viggo.jf.intel.com
2021-02-04Revert "x86/setup: don't remove E820_TYPE_RAM for pfn 0"Mike Rapoport
This reverts commit bde9cfa3afe4324ec251e4af80ebf9b7afaf7afe. Changing the first memory page type from E820_TYPE_RESERVED to E820_TYPE_RAM makes it a part of "System RAM" resource rather than a reserved resource and this in turn causes devmem_is_allowed() to treat is as area that can be accessed but it is filled with zeroes instead of the actual data as previously. The change in /dev/mem output causes lilo to fail as was reported at slakware users forum, and probably other legacy applications will experience similar problems. Link: https://www.linuxquestions.org/questions/slackware-14/slackware-current-lilo-vesa-warnings-after-recent-updates-4175689617/#post6214439 Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-04Merge tag 'acpi-5.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Address recent regression causing battery devices to be never bound to a driver on some systems (Hans de Goede)" * tag 'acpi-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: scan: Fix battery devices sometimes never binding
2021-02-04Merge tag 'ovl-fixes-5.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fixes from Miklos Szeredi: - Fix capability conversion and minor overlayfs bugs that are related to the unprivileged overlay mounts introduced in this cycle. - Fix two recent (v5.10) and one old (v4.10) bug. - Clean up security xattr copy-up (related to a SELinux regression). * tag 'ovl-fixes-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: implement volatile-specific fsync error behaviour ovl: skip getxattr of security labels ovl: fix dentry leak in ovl_get_redirect ovl: avoid deadlock on directory ioctl cap: fix conversions on getxattr ovl: perform vfs_getxattr() with mounter creds ovl: add warning on user_ns mismatch
2021-02-04KVM: x86: Set so called 'reserved CR3 bits in LM mask' at vCPU resetSean Christopherson
Set cr3_lm_rsvd_bits, which is effectively an invalid GPA mask, at vCPU reset. The reserved bits check needs to be done even if userspace never configures the guest's CPUID model. Cc: stable@vger.kernel.org Fixes: 0107973a80ad ("KVM: x86: Introduce cr3_lm_rsvd_bits in kvm_vcpu_arch") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210204000117.3303214-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-04Merge branch 'nvme-5.11' of git://git.infradead.org/nvme into block-5.11Jens Axboe
Pull NVMe fixes from Christoph. * 'nvme-5.11' of git://git.infradead.org/nvme: nvmet-tcp: fix out-of-bounds access when receiving multiple h2cdata PDUs update the email address for Keith Bush nvme-pci: ignore the subsysem NQN on Phison E16 nvme-pci: avoid the deepest sleep state on Kingston A2000 SSDs
2021-02-04io_uring: don't modify identity's files uncess identity is cowedXiaoguang Wang
Abaci Robot reported following panic: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 800000010ef3f067 P4D 800000010ef3f067 PUD 10d9df067 PMD 0 Oops: 0002 [#1] SMP PTI CPU: 0 PID: 1869 Comm: io_wqe_worker-0 Not tainted 5.11.0-rc3+ #1 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:put_files_struct+0x1b/0x120 Code: 24 18 c7 00 f4 ff ff ff e9 4d fd ff ff 66 90 0f 1f 44 00 00 41 57 41 56 49 89 fe 41 55 41 54 55 53 48 83 ec 08 e8 b5 6b db ff 41 ff 0e 74 13 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f e9 9c RSP: 0000:ffffc90002147d48 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88810d9a5300 RCX: 0000000000000000 RDX: ffff88810d87c280 RSI: ffffffff8144ba6b RDI: 0000000000000000 RBP: 0000000000000080 R08: 0000000000000001 R09: ffffffff81431500 R10: ffff8881001be000 R11: 0000000000000000 R12: ffff88810ac2f800 R13: ffff88810af38a00 R14: 0000000000000000 R15: ffff8881057130c0 FS: 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010dbaa002 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __io_clean_op+0x10c/0x2a0 io_dismantle_req+0x3c7/0x600 __io_free_req+0x34/0x280 io_put_req+0x63/0xb0 io_worker_handle_work+0x60e/0x830 ? io_wqe_worker+0x135/0x520 io_wqe_worker+0x158/0x520 ? __kthread_parkme+0x96/0xc0 ? io_worker_handle_work+0x830/0x830 kthread+0x134/0x180 ? kthread_create_worker_on_cpu+0x90/0x90 ret_from_fork+0x1f/0x30 Modules linked in: CR2: 0000000000000000 ---[ end trace c358ca86af95b1e7 ]--- I guess case below can trigger above panic: there're two threads which operates different io_uring ctxs and share same sqthread identity, and later one thread exits, io_uring_cancel_task_requests() will clear task->io_uring->identity->files to be NULL in sqpoll mode, then another ctx that uses same identity will panic. Indeed we don't need to clear task->io_uring->identity->files here, io_grab_identity() should handle identity->files changes well, if task->io_uring->identity->files is not equal to current->files, io_cow_identity() should handle this changes well. Cc: stable@vger.kernel.org # 5.5+ Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-04KVM: x86/mmu: Fix TDP MMU zap collapsible SPTEsBen Gardon
There is a bug in the TDP MMU function to zap SPTEs which could be replaced with a larger mapping which prevents the function from doing anything. Fix this by correctly zapping the last level SPTEs. Cc: stable@vger.kernel.org Fixes: 14881998566d ("kvm: x86/mmu: Support disabling dirty logging for the tdp MMU") Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20210202185734.1680553-11-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-04Merge tag 'drm-misc-fixes-2021-02-02' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes * drm/bridge/lontium-lt9611uxc: EDID fixes; Don't handle hotplug events in IRQ handler * drm/ttm: Use _GFP_NOWARN for huge pages Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YBlHU4sc/5GHpXpg@linux-uq9g
2021-02-04drm/nouveau: fix dma syncing warning with debugging on.Dave Airlie
Since I wrote the below patch if you run a debug kernel you can a dma debug warning like: nouveau 0000:1f:00.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000016e012000] [size=4096 bytes] The old nouveau code wasn't consolidate the pages like the ttm code, but the dma-debug expects the sync code to give it the same base/range pairs as the allocator. Fix the nouveau sync code to consolidate pages before calling the sync code. Fixes: bd549d35b4be0 ("nouveau: use ttm populate mapping functions. (v2)") Reported-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/417588/
2021-02-03Merge tag 'for-linus-5.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML fixes from Richard Weinberger: - Make sure to set a default console, otherwise ttynull is selected - Revert initial ARCH_HAS_SET_MEMORY support, this needs more work - Fix a regression due to ubd refactoring - Various small fixes * tag 'for-linus-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: time: fix initialization in time-travel mode um: fix os_idle_sleep() to not hang Revert "um: support some of ARCH_HAS_SET_MEMORY" Revert "um: allocate a guard page to helper threads" um: virtio: free vu_dev only with the contained struct device um: kmsg_dumper: always dump when not tty console um: stdio_console: Make preferred console um: return error from ioremap() um: ubd: fix command line handling of ubd
2021-02-03Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "Fix the arm64 linear map range detection for tagged addresses and replace the bitwise operations with subtract (virt_addr_valid(), __is_lm_address(), __lm_to_phys())" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Use simpler arithmetics for the linear map macros arm64: Do not pass tagged addresses to __is_lm_address()
2021-02-03Merge tag 'trace-v5.11-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Initialize tracing-graph-pause at task creation, not start of function tracing, to avoid corrupting the pause counter. - Set "pause-on-trace" for latency tracers as that option breaks their output (regression). - Fix the wrong error return for setting kretprobes on future modules (before they are loaded). - Fix re-registering the same kretprobe. - Add missing value check for added RCU variable reload. * tag 'trace-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracepoint: Fix race between tracing and removing tracepoint kretprobe: Avoid re-registration of the same kretprobe earlier tracing/kprobe: Fix to support kretprobe events on unloaded modules tracing: Use pause-on-trace with the latency tracers fgraph: Initialize tracing_graph_pause at task creation
2021-02-03Merge tag 'arm-soc-fixes-v5.11-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "The code fixes in this round are all for the Texas Instruments OMAP platform, addressing several regressions related to the ti-sysc interconnect changes that was merged in linux-5.11 and one recently introduced RCU usage warning. Tero Kristo updates his maintainer file entries as he is changing to a new employer. The other changes are for devicetree files across eight different platforms: TI OMAP: - multiple gpio related one-line fixes Allwinner/sunxi: - ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode - soc: sunxi: mbus: Remove DE2 display engine compatibles NXP lpc32xx: - ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL STMicroelectronics stm32 - multiple minor fixes for DHCOM/DHCOR boards NXP Layerscape: - Fix DCFG address range on LS1046A SoC Amlogic meson: - fix reboot issue on odroid C4 - revert an ethernet change that caused a regression - meson-g12: Set FL-adj property value Rockchip: - multiple minor fixes on 64-bit rockchip machines Qualcomm: - Regression fixes for Lenovo Yoga touchpad and for interconnect configuration - Boot fixes for 'LPASS' clock configuration on two machines" * tag 'arm-soc-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits) ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode arm64: dts: ls1046a: fix dcfg address range soc: sunxi: mbus: Remove DE2 display engine compatibles arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4 Revert "arm64: dts: amlogic: add missing ethernet reset ID" arm64: dts: rockchip: Disable display for NanoPi R2S ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4 arm64: dts: rockchip: remove interrupt-names property from rk3399 vdec node drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02 ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX ARM: dts: stm32: Fix GPIO hog names on DHCOM ARM: dts: stm32: Disable optional TSC2004 on DRC02 board ARM: dts: stm32: Disable WP on DHCOM uSD slot ARM: dts: stm32: Connect card-detect signal on DHCOM ARM: dts: stm32: Fix polarity of the DH DRC02 uSD card detect arm64: dts: qcom: sdm845: Reserve LPASS clocks in gcc ...
2021-02-03Merge tag 'gpio-fixes-for-v5.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "Some more fixes from the GPIO subsystem for this release. This time it's only core fixes: - fix a memory leak in error path in gpiolib - clear debounce period in output mode in the character device code - remove shadowed variable" * tag 'gpio-fixes-for-v5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: gpiolib: remove shadowed variable gpiolib: free device name on error path to fix kmemleak gpiolib: cdev: clear debounce period if line set to output
2021-02-03Merge tag 'platform-drivers-x86-v5.11-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Two last minute small but important fixes. The hp-wmi change fixes an issue which is actively being hit by users: https://bugzilla.redhat.com/show_bug.cgi?id=1918255 https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3564 And the dell-wmi-sysman patch fixes a bug in the new dell-wmi-sysman driver which causes some systems to hang at boot when the driver loads" * tag 'platform-drivers-x86-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: dell-wmi-sysman: fix a NULL pointer dereference platform/x86: hp-wmi: Disable tablet-mode reporting by default
2021-02-03nvmet-tcp: fix out-of-bounds access when receiving multiple h2cdata PDUsSagi Grimberg
When the host sends multiple h2cdata PDUs, we keep track on the receive progress and calculate the scatterlist index and offsets. The issue is that sg_offset should only be kept for the first iov entry we map in the iovec as this is the difference between our cursor and the sg entry offset itself. In addition, the sg index was calculated wrong because we should not round up when dividing the command byte offset with PAG_SIZE. Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver") Reported-by: Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com> Tested-by: Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-03xhci: fix bounce buffer usage for non-sg list caseMathias Nyman
xhci driver may in some special cases need to copy small amounts of payload data to a bounce buffer in order to meet the boundary and alignment restrictions set by the xHCI specification. In the majority of these cases the data is in a sg list, and driver incorrectly assumed data is always in urb->sg when using the bounce buffer. If data instead is contiguous, and in urb->transfer_buffer, we may still need to bounce buffer a small part if data starts very close (less than packet size) to a 64k boundary. Check if sg list is used before copying data to/from it. Fixes: f9c589e142d0 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer") Cc: stable@vger.kernel.org Reported-by: Andreas Hartmann <andihartmann@01019freenet.de> Tested-by: Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210203113702.436762-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03tools/power/turbostat: Fallback to an MSR read for EPBBorislav Petkov
Commit 6d6501d912a9 ("tools/power/turbostat: Read energy_perf_bias from sysfs") converted turbostat to read the energy_perf_bias value from sysfs. However, older kernels which do not have that file yet, would fail. For those, fall back to the MSR reading. Fixes: 6d6501d912a9 ("tools/power/turbostat: Read energy_perf_bias from sysfs") Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Link: https://lkml.kernel.org/r/20210127132444.981120-1-dedekind1@gmail.com
2021-02-03usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720Pali Rohár
Older ATF does not provide SMC call for USB 3.0 phy power on functionality and therefore initialization of xhci-hcd is failing when older version of ATF is used. In this case phy_power_on() function returns -EOPNOTSUPP. [ 3.108467] mvebu-a3700-comphy d0018300.phy: unsupported SMC call, try updating your firmware [ 3.117250] phy phy-d0018300.phy.0: phy poweron failed --> -95 [ 3.123465] xhci-hcd: probe of d0058000.usb failed with error -95 This patch introduces a new plat_setup callback for xhci platform drivers which is called prior calling usb_add_hcd() function. This function at its beginning skips PHY init if hcd->skip_phy_initialization is set. Current init_quirk callback for xhci platform drivers is called from xhci_plat_setup() function which is called after chip reset completes. It happens in the middle of the usb_add_hcd() function and therefore this callback cannot be used for setting if PHY init should be skipped or not. For Armada 3720 this patch introduce a new xhci_mvebu_a3700_plat_setup() function configured as a xhci platform plat_setup callback. This new function calls phy_power_on() and in case it returns -EOPNOTSUPP then XHCI_SKIP_PHY_INIT quirk is set to instruct xhci-plat to skip PHY initialization. This patch fixes above failure by ignoring 'not supported' error in xhci-hcd driver. In this case it is expected that phy is already power on. It fixes initialization of xhci-hcd on Espressobin boards where is older Marvell's Arm Trusted Firmware without SMC call for USB 3.0 phy power. This is regression introduced in commit bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs") where USB 3.0 phy was defined and therefore xhci-hcd on Espressobin with older ATF started failing. Fixes: bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs") Cc: <stable@vger.kernel.org> # 5.1+: ea17a0f153af: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno Cc: <stable@vger.kernel.org> # 5.1+: f768e718911e: usb: host: xhci-plat: add priv quirk for skip PHY initialization Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> # On R-Car Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> # xhci-plat Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20210201150803.7305-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03Merge tag 'sunxi-fixes-for-5.11-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes One fix for a phy-mode ethernet issue, and one to fix the display output on SoCs with the Display Engine 2 * tag 'sunxi-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode soc: sunxi: mbus: Remove DE2 display engine compatibles Link: https://lore.kernel.org/r/f8298059-f9ca-43b4-9e29-35bc0e0c9b15.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-03ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLLAlexandre Belloni
This reverts commit c17e9377aa81664d94b4f2102559fcf2a01ec8e7. The lpc32xx clock driver is not able to actually change the PLL rate as this would require reparenting ARM_CLK, DDRAM_CLK, PERIPH_CLK to SYSCLK, then stop the PLL, update the register, restart the PLL and wait for the PLL to lock and finally reparent ARM_CLK, DDRAM_CLK, PERIPH_CLK to HCLK PLL. Currently, the HCLK driver simply updates the registers but this has no real effect and all the clock rate calculation end up being wrong. This is especially annoying for the peripheral (e.g. UARTs, I2C, SPI). Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20210203090320.GA3760268@piout.net' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-03ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-modeHermann Lauer
BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high packet loss rates. The realtek phy driver overrides the settings of the pull ups for the delays, so fix this for BananaPro. Fix the phy-mode description to correctly reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 10662a33dcd9 ("ARM: dts: sun7i: Add dts file for Bananapro board") Signed-off-by: Hermann Lauer <Hermann.Lauer@uni-heidelberg.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210128111842.GA11919@lemon.iwr.uni-heidelberg.de
2021-02-03KVM: x86: cleanup CR3 reserved bits checksPaolo Bonzini
If not in long mode, the low bits of CR3 are reserved but not enforced to be zero, so remove those checks. If in long mode, however, the MBZ bits extend down to the highest physical address bit of the guest, excluding the encryption bit. Make the checks consistent with the above, and match them between nested_vmcb_checks and KVM_SET_SREGS. Cc: stable@vger.kernel.org Fixes: 761e41693465 ("KVM: nSVM: Check that MBZ bits in CR3 and CR4 are not set on vmrun of nested guests") Fixes: a780a3ea6282 ("KVM: X86: Fix reserved bits check for MOV to CR3") Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-03KVM: SVM: Treat SVM as unsupported when running as an SEV guestSean Christopherson
Don't let KVM load when running as an SEV guest, regardless of what CPUID says. Memory is encrypted with a key that is not accessible to the host (L0), thus it's impossible for L0 to emulate SVM, e.g. it'll see garbage when reading the VMCB. Technically, KVM could decrypt all memory that needs to be accessible to the L0 and use shadow paging so that L0 does not need to shadow NPT, but exposing such information to L0 largely defeats the purpose of running as an SEV guest. This can always be revisited if someone comes up with a use case for running VMs inside SEV guests. Note, VMLOAD, VMRUN, etc... will also #GP on GPAs with C-bit set, i.e. KVM is doomed even if the SEV guest is debuggable and the hypervisor is willing to decrypt the VMCB. This may or may not be fixed on CPUs that have the SVME_ADDR_CHK fix. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210202212017.2486595-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-02bfq-iosched: Revert "bfq: Fix computation of shallow depth"Lin Feng
This reverts commit 6d4d273588378c65915acaf7b2ee74e9dd9c130a. bfq.limit_depth passes word_depths[] as shallow_depth down to sbitmap core sbitmap_get_shallow, which uses just the number to limit the scan depth of each bitmap word, formula: scan_percentage_for_each_word = shallow_depth / (1 << sbimap->shift) * 100% That means the comments's percentiles 50%, 75%, 18%, 37% of bfq are correct. But after commit patch 'bfq: Fix computation of shallow depth', we use sbitmap.depth instead, as a example in following case: sbitmap.depth = 256, map_nr = 4, shift = 6; sbitmap_word.depth = 64. The resulsts of computed bfqd->word_depths[] are {128, 192, 48, 96}, and three of the numbers exceed core dirver's 'sbitmap_word.depth=64' limit nothing. Signed-off-by: Lin Feng <linf@wangsu.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-02RISC-V: Define MAXPHYSMEM_1GB only for RV32Atish Patra
MAXPHYSMEM_1GB option was added for RV32 because RV32 only supports 1GB of maximum physical memory. This lead to few compilation errors reported by kernel test robot which created the following configuration combination which are not useful but can be configured. 1. MAXPHYSMEM_1GB & RV64 2, MAXPHYSMEM_2GB & RV32 Fix this by restricting MAXPHYSMEM_1GB for RV32 and MAXPHYSMEM_2GB only for RV64. Fixes: e557793799c5 ("RISC-V: Fix maximum allowed phsyical memory for RV32") Cc: stable@vger.kernel.org Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-02riscv: Align on L1_CACHE_BYTES when STRICT_KERNEL_RWXSebastien Van Cauwenberghe
Allows the sections to be aligned on smaller boundaries and therefore results in a smaller kernel image size. Signed-off-by: Sebastien Van Cauwenberghe <svancau@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-02RISC-V: Fix .init section permission updateAtish Patra
.init section permission should only updated to non-execute if STRICT_KERNEL_RWX is enabled. Otherwise, this will lead to a kernel hang. Fixes: 19a00869028f ("RISC-V: Protect all kernel sections including init early") Cc: stable@vger.kernel.org Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-02riscv: virt_addr_valid must check the address belongs to linear mappingAlexandre Ghiti
virt_addr_valid macro checks that a virtual address is valid, ie that the address belongs to the linear mapping and that the corresponding physical page exists. Add the missing check that ensures the virtual address belongs to the linear mapping, otherwise __virt_to_phys, when compiled with CONFIG_DEBUG_VIRTUAL enabled, raises a WARN that is interpreted as a kernel bug by syzbot. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-03scripts/clang-tools: switch explicitly to Python 3Masahiro Yamada
For the same reason as commit 51839e29cb59 ("scripts: switch explicitly to Python 3"), switch some more scripts, which I tested and confirmed working on Python 3. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nathan Chancellor <nathan@kernel.org>
2021-02-02drm/amd/display: Decrement refcount of dc_sink before reassignmentVictor Lu
[why] An old dc_sink state is causing a memory leak because it is missing a dc_sink_release before a new dc_sink is assigned back to aconnector->dc_sink. [how] Decrement the dc_sink refcount before reassigning it to a new dc_sink. Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Free atomic state after drm_atomic_commitVictor Lu
[why] drm_atomic_commit was changed so that the caller must free their drm_atomic_state reference on successes. [how] Add drm_atomic_commit_put after drm_atomic_commit call in dm_force_atomic_commit. Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Fix dc_sink kref count in emulated_link_detectVictor Lu
[why] prev_sink is not used anywhere else in the function and the reference to it from dc_link is replaced with a new dc_sink. [how] Change dc_sink_retain(prev_sink) to dc_sink_release(prev_sink). Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Release DSC before acquiringMikita Lipski
[why] Need to unassign DSC from pipes that are not using it so other pipes can acquire it. That is needed for asic's that have unmatching number of DSC engines from the number of pipes. [how] Before acquiring dsc to stream resources, first remove it. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Eryk Brol <Eryk.Brol@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 10:56:18 +0000