summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-05-30ARM: l2c: prima2: convert to generic l2c OF initialisationRussell King
Remove the explicit call to l2x0_of_init(), converting to the generic infrastructure instead. Along with this change, we can delete l2x0.c from prima2. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: prima2: remove cache size overrideRussell King
The cache size should already be present in the L2 cache auxiliary control register: it is part of the integration process to configure the hardware IP. Most platforms get this right, yet still many cargo-cult program, and assume that they always need specifying to the L2 cache code. Remove them so we can find out which really need this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: AM43x: add L2 cache supportSekhar Nori
Add support for L2 cache controller (PL310) on AM437x SoC. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: omap2+: get rid of init callSekhar Nori
Get rid of init call to initialize L2 cache. Instead use the init_early machine hook. This helps in using the initialization routine across SoCs without the need of ugly cpu_is_*() checks. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: omap2+: get rid of redundant cache replacement policy settingSekhar Nori
L2 cache initialization for OMAP4 redundantly sets the cache policy to Round-Robin. This is not needed since thats the PL310 default anyway. Removing this reduces the number of platform specific aux control settings. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: omap2: avoid reading directly from the L2 registers in platform codeRussell King
Avoid reading directly from the L2 registers in platform code. The L2 code will have already saved the register values itself into the l2x0_saved_regs structure, so platform code should just move these values to where they're required. This is safe because the L2x0 will have been initialised by an early initcall, whereas the OMAP4 PM code is initialised late. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: omap2: remove explicit non-secure access bitsRussell King
Since we now always enable NS access to the unlock registers, this can be removed from OMAP4. Remove the NS access bit for the interrupt registers from OMAP4 as well - nothing in the kernel accesses that yet, and we can add it in core code when we have the need. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: omap2: remove cache size overrideRussell King
The cache size should already be present in the L2 cache auxiliary control register: it is part of the integration process to configure the hardware IP. Most platforms get this right, yet still many cargo-cult program, and assume that they always need specifying to the L2 cache code. Remove them so we can find out which really need this. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: omap2: remove explicit SMI calls to enable L2 cacheRussell King
Now that OMAP2 uses the write_sec method, we don't need to enable the L2 cache in OMAP2 specific code; this can be done via the normal mechanisms in the L2C code. Remove the OMAP2 specific code. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: omap2: implement new write_sec methodRussell King
With the write_sec method, we no longer need to override the default L2C disable method, and we no longer need the L2C set_debug method. Both of these can be handled via the write_sec method. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: nomadik: convert to generic l2c OF initialisationRussell King
Remove the explicit call to l2x0_of_init(), converting to the generic infrastructure instead. This also allows us to eliminate the .init_machine function as it is identical to the generic version. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: nomadik: remove cache size overrideRussell King
The cache size should already be present in the L2 cache auxiliary control register: it is part of the integration process to configure the hardware IP. Most platforms get this right, yet still many cargo-cult program, and assume that they always need specifying to the L2 cache code. Remove them so we can find out which really need this. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: mvebu: convert to generic l2c OF initialisationRussell King
Remove the explicit call to l2x0_of_init(), converting to the generic infrastructure instead. Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: imx vf610: convert to generic l2c OF initialisationRussell King
Remove the explicit call to l2x0_of_init(), converting to the generic infrastructure instead. Since the .init_irq method only calls irqchip_init(), we can remove that too as the generic code will take care of that. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: imx: convert to common l2c310 early resume functionalityRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: imx: remove direct write to power control registerRussell King
Now that we handle this in core code, we don't need platforms enabling the low power modes directly. Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: highbank: convert to generic l2c OF initialisationRussell King
Remove the explicit call to l2x0_of_init(), converting to the generic infrastructure instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: highbank: remove explicit SMI call in L2 cache initialisationRussell King
Now that highbank uses the write_sec method, we don't need to enable the L2 cache in SoC specific code; this can be done via the normal mechanisms in the L2C code. Checking with Rob Herring: > > Can we kill the "highbank_smc1(0x102, 0x1);" here? That means > > l2x0_of_init() will see the L2 cache disabled, and will try to enable > > it via the write_sec hook, so it should do the right thing. > > Yes, that should work. You should be able to just call l2x0_of_init > unconditionally. The condition was really to just avoid the smc on > Midway which does get handled on h/w, but not if running virtualized. So also drop the DT check too. I'm leaving the config check in place so that if L2 is disabled, the write_sec hook can be optimised away. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: highbank: implement new write_sec methodRussell King
With the write_sec method, we no longer need to override the default L2C disable method. This can be handled via the write_sec method instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: exynos: convert to generic l2c OF initialisation (and thereby fix it)Russell King
exynos was unconditionally calling the L2 cache initialisation from an early_initcall. This breaks multiplatform kernels. Thankfully, converting to generic l2c initialisation fixes this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: exynos: convert to common l2c310 early resume functionalityRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: exynos: remove cache size overrideRussell King
The cache size should already be present in the L2 cache auxiliary control register: it is part of the integration process to configure the hardware IP. Most platforms get this right, yet still many cargo-cult program, and assume that they always need specifying to the L2 cache code. Remove them so we can find out which really need this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: cns3xxx: remove cache size overrideRussell King
The cache size should already be present in the L2 cache auxiliary control register: it is part of the integration process to configure the hardware IP. Most platforms get this right, yet still many cargo-cult program, and assume that they always need specifying to the L2 cache code. Remove them so we can find out which really need this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: berlin: convert to generic l2c OF initialisationRussell King
Remove the explicit call to l2x0_of_init(), converting to the generic infrastructure instead. We can remove the explicit machine init too as this becomes identical to the generic version. Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: bcm_5301x: convert to generic l2c OF initialisationRussell King
Remove the explicit call to l2x0_of_init(), converting to the generic infrastructure instead. We can remove the explicit machine init too as this becomes identical to the generic version. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: provide common PL310 early resume codeRussell King
Provide a common assembly implementation for PL310 resume code. Certain platforms need to re-initialise the L2C cache early as it may preserve data across a S2RAM cycle, and therefore must be enabled along with the L1 cache and MMU. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: add platform independent core L2 cache OF initialisationRussell King
Add a hook into the core ARM code to perform L2 cache initialisation in a platform independent manner. Platforms still get to indicate their auxiliary control register values and mask, but the initialisation call will now be made from generic code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: always enable non-secure access to lockdown registersRussell King
Since we always write to these during the cache initialisation, it is a good idea to always have the non-secure access bit set. Set it in core code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: always enable low power modesRussell King
Always enable the L2C low power modes on L2C-310 R3P0 and newer parts. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: remove platforms/SoCs setting early BRESPRussell King
Since we now automatically enable early BRESP in core L2C-310 code when we detect a Cortex-A9, we don't need platforms/SoCs to set this bit explicitly. Instead, they should seek to preserve the value of bit 30 in the auxiliary control register. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: add automatic enable of early BRESPRussell King
The AXI bus protocol requires that a write response should only be sent back to the master when the last write has been accepted. Early BRESP allows the L2C-310 to send the write response as soon as the store buffer accepts the write address. Cortex-A9 processors can signal to the L2C-310 that they wish to be notified early, and if this optimisation is enabled, the L2C-310 can signal an early write response. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: move L2 cache register saving to a more sensible locationRussell King
Move the L2 cache register saving to a more sensible location - after the cache has been enabled, and fixups have been run. We move the saving of the auxiliary control register into the ->save function as well which makes everything operate in a sane and maintainable way. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: check that DT files specify the required "cache-unified" propertyRussell King
This is a required property, and should always be specified. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: fix register namingRussell King
We have a mixture of different devices with different register layouts, but we group all the bits together in an opaque mess. Split them out into those which are L2C-310 specific and ones which refer to earlier devices. Provide full auxiliary control register definitions. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: implement L2C-310 erratum 752271 in core L2C codeRussell King
Rather than having SoCs work around L2C erratum themselves, move them into core code. This erratum affects the double linefill feature which needs to be disabled for r3p0 to r3p1-50rel0. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: provide generic hook to intercept writes to secure registersRussell King
When Linux is running in the non-secure world, any write to a secure L2C register will generate an abort. Platforms normally have to call firmware to work around this. Provide a hook for them to intercept any L2C secure register write. l2c_write_sec() avoids writes to secure registers which are already set to the appropriate value, thus avoiding the overhead of needlessly calling into the secure monitor. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: move errata configuration options to arch/arm/mm/KconfigRussell King
Move the L2C-310 errata configuration options to arch/arm/mm/Kconfig along side the option which enables support for this device. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: move way size calculation data into l2c_init_dataRussell King
Move the way size calculation data (base of way size) out of the switch statement into the provided initialisation data. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: add decode for L2C-220 cache waysRussell King
Rather than assuming these are always 8-way, it can be decoded from the auxillary register in the same manner as L2C-210. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: move type string into l2c_init_data structureRussell King
Rather than decoding this from the ID register, store it in the l2c_init_data structure. This simplifies things some more, and allows us to better provide further details as to how we're driving the cache. We print the cache ID value anyway should we need to precisely identify the cache hardware. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: remove obsolete l2x0 ops for non-OF initRussell King
non-OF initialisation has never been used with any cache controller which isn't an ARM cache controller, so we can safely get rid of the old (and buggy) l2x0_*-based operations structure. This is also the last reference to: - l2x0_clean_line() - l2x0_inv_line() - l2x0_flush_line() - l2x0_flush_all() - l2x0_clean_all() - l2x0_inv_all() - l2x0_inv_range() - l2x0_clean_range() - l2x0_flush_range() - l2x0_enable() - l2x0_resume() so kill those functions too. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: convert Broadcom L2C-310 to new codeRussell King
The Broadcom L2C-310 devices use ARMs L2C-310 R2P3 or later. These require no errata workarounds, and so we can directly call the l2c210 functions from their methods. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: add L2C-220 specific handlersRussell King
The L2C-220 is different from the L2C-210 and L2C-310 in that every operation is a background operation: this means we have to use spinlocks to protect all operations, and we have to wait for every operation to complete. Should a second operation be attempted while a previous operation is in progress, the response will be an imprecise abort. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: use L2C-210 handlers for L2C-310 errata-less implementationsRussell King
Where no errata affect the L2C-310 handlers, they are functionally equivalent to L2C-210. Re-use the L2C-210 handlers for the L2C-310 part. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: implement L2C-310 erratum 588369 as a method overrideRussell King
Implement L2C-310 erratum 588369 by overriding the invalidate range and flush range methods in the outer_cache operations structure. This allows us to sensibly contain the erratum code in one place without affecting other locations/implemetations. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: implement L2C-310 erratum 727915 as a method overrideRussell King
Implement L2C-310 erratum 727915 by overriding the flush_all method in the outer_cache operations structure. This allows us to sensibly contain the erratum code in one place without affecting other locations or implementations. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: add L2C-210 specific handlersRussell King
Add L2C-210 specific cache operation handlers. These are tailored to the requirements of the L2C-210 cache controller, which doesn't require any workarounds. We avoid using the way operations during normal operation, which means we can avoid locking: the only time we use the way operations are during initialisation, and when disabling the cache. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: move pl310_set_debug() into l2c-310 codeRussell King
Move the pl310_set_debug() into the l2c-310 code area, and don't hide it with ifdefs. Rename it to l2c310_set_debug(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: simplify l2x0 unlocking codeRussell King
The l2x0 unlocking code is only called from l2x0_enable() now, so move the logic entirely into that function and simplify it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: clean up save/resume functionsRussell King
Rename the pl310 save/resume functions to have a l2c310 prefix - this is it's official name. Use a local cached copy of the l2x0_base virtual address, and also realise that many of the resume function tails are the same as the enable functions, so make a call to the enable function instead of duplicating that code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>