summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-05-13irqchip: Add brcm, bcm6345-l1-intc device tree bindingSimon Arlott
Add device tree binding for the BCM6345 interrupt controller. This controller is similar to the SMP-capable BCM7038 and the BCM3380 but with packed interrupt registers. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Rob Herring <robh@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: defconfigs: Remove CONFIG_IPV6_PRIVACYBorislav Petkov
Option is long gone, see 5d9efa7ee99e ("ipv6: Remove privacy config option.") Signed-off-by: Borislav Petkov <bp@suse.de> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/12919/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Use generic clkdev.h headerStephen Boyd
The generic header file is equivalent to the MIPS one, so use the generic one instead. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-kernel@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12261/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Sync icache & dcache in set_pte_atPaul Burton
It's possible for pages to become visible prior to update_mmu_cache running if a thread within the same address space preempts the current thread or runs simultaneously on another CPU. That is, the following scenario is possible: CPU0 CPU1 write to page flush_dcache_page flush_icache_page set_pte_at map page update_mmu_cache If CPU1 maps the page in between CPU0's set_pte_at, which marks it valid & visible, and update_mmu_cache where the dcache flush occurs then CPU1s icache will fill from stale data (unless it fills from the dcache, in which case all is good, but most MIPS CPUs don't have this property). Commit 4d46a67a3eb8 ("MIPS: Fix race condition in lazy cache flushing.") attempted to fix that by performing the dcache flush in flush_icache_page such that it occurs before the set_pte_at call makes the page visible. However it has the problem that not all code that writes to pages exposed to userland call flush_icache_page. There are many callers of set_pte_at under mm/ and only 2 of them do call flush_icache_page. Thus the race window between a page becoming visible & being coherent between the icache & dcache remains open in some cases. To illustrate some of the cases, a WARN was added to __update_cache with this patch applied that triggered in cases where a page about to be flushed from the dcache was not the last page provided to flush_icache_page. That is, backtraces were obtained for cases in which the race window is left open without this patch. The 2 standout examples follow. When forking a process: [ 15.271842] [<80417630>] __update_cache+0xcc/0x188 [ 15.277274] [<80530394>] copy_page_range+0x56c/0x6ac [ 15.282861] [<8042936c>] copy_process.part.54+0xd40/0x17ac [ 15.289028] [<80429f80>] do_fork+0xe4/0x420 [ 15.293747] [<80413808>] handle_sys+0x128/0x14c When exec'ing an ELF binary: [ 14.445964] [<80417630>] __update_cache+0xcc/0x188 [ 14.451369] [<80538d88>] move_page_tables+0x414/0x498 [ 14.457075] [<8055d848>] setup_arg_pages+0x220/0x318 [ 14.462685] [<805b0f38>] load_elf_binary+0x530/0x12a0 [ 14.468374] [<8055ec3c>] search_binary_handler+0xbc/0x214 [ 14.474444] [<8055f6c0>] do_execveat_common+0x43c/0x67c [ 14.480324] [<8055f938>] do_execve+0x38/0x44 [ 14.485137] [<80413808>] handle_sys+0x128/0x14c These code paths write into a page, call flush_dcache_page then call set_pte_at without flush_icache_page inbetween. The end result is that the icache can become corrupted & userland processes may execute unexpected or invalid code, typically resulting in a reserved instruction exception, a trap or a segfault. Fix this race condition fully by performing any cache maintenance required to keep the icache & dcache in sync in set_pte_at, before the page is made valid. This has the added bonus of ensuring the cache maintenance always happens in one location, rather than being duplicated in flush_icache_page & update_mmu_cache. It also matches the way other architectures solve the same problem (see arm, ia64 & powerpc). Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reported-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Cc: Lars Persson <lars.persson@axis.com> Fixes: 4d46a67a3eb8 ("MIPS: Fix race condition in lazy cache flushing.") Cc: Steven J. Hill <sjhill@realitydiluted.com> Cc: David Daney <david.daney@cavium.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable <stable@vger.kernel.org> # v4.1+ Patchwork: https://patchwork.linux-mips.org/patch/12722/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Handle highmem pages in __update_cachePaul Burton
The following patch will expose __update_cache to highmem pages. Handle them by mapping them in for the duration of the cache maintenance, just like in __flush_dcache_page. The code for that isn't shared because we need the page address in __update_cache so sharing became messy. Given that the entirity is an extra 5 lines, just duplicate it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable <stable@vger.kernel.org> # v4.1+ Patchwork: https://patchwork.linux-mips.org/patch/12721/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Flush highmem pages in __flush_dcache_pagePaul Burton
When flush_dcache_page is called on an executable page, that page is about to be provided to userland & we can presume that the icache contains no valid entries for its address range. However if the icache does not fill from the dcache then we cannot presume that the pages content has been written back as far as the memories that the dcache will fill from (ie. L2 or further out). This was being done for lowmem pages, but not for highmem which can lead to icache corruption. Fix this by mapping highmem pages & flushing their content from the dcache in __flush_dcache_page before providing the page to userland, just as is done for lowmem pages. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12720/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Flush dcache for flush_kernel_dcache_pagePaul Burton
The flush_kernel_dcache_page function was previously essentially a nop. This is incorrect for MIPS, where if a page has been modified & either it aliases or it's executable & the icache doesn't fill from dcache then the content needs to be written back from dcache to the next level of the cache hierarchy (which is shared with the icache). Implement this by simply calling flush_dcache_page, treating this kmapped cache flush function (flush_kernel_dcache_page) exactly the same as its non-kmapped counterpart (flush_dcache_page). Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars Persson <lars.persson@axis.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12719/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: OCTEON: cavium_octeon_defconfig: enable all OCTEON SoC driversAaro Koskinen
Some drivers for SoC provided functionality are missing. Enable to those in defconfig to provide better build/testing coverage. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12750/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Detect DSP v3 supportZubair Lutfullah Kakakhel
DSPv3 is supported on all MIPSr6 systems which indicate support for DSPv2. This doesn't require any changes to the kernel's handling of DSP resources. The patch is to detect support and indicate it in /proc/cpuinfo DSP v3 introduces a new instruction BPOSGE32C Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12918/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13serial: pic32_uart: Add PIC32 UART driverAndrei Pistirica
This adds UART and a serial console driver for Microchip PIC32 class devices. [ralf@linux-mips.org: Resolved merge conflict.] Signed-off-by: Andrei Pistirica <andrei.pistirica@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Reviewed-by: Alan Cox <alan@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Cc: linux-api@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12101/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13dt/bindings: Add bindings for PIC32 UART driverAndrei Pistirica
Document the devicetree bindings for the UART peripheral found on Microchip PIC32 class devices. Signed-off-by: Andrei Pistirica <andrei.pistirica@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12100/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: cpu: Convert MIPS_CPU_* defs to (1ull << x)James Hogan
The MIPS_CPU_* definitions have now filled the first 32-bits, and are getting longer since they're written in hex without zero padding. Adding my 8 extra MIPS_CPU_* definitions which I haven't upstreamed yet this is getting increasingly ugly as the comments get shifted progressively to the right. Its also error prone, and I've seen this cause mistakes on 3 separate occasions now, not helped by it being a conflict hotspot. Convert all the MIPS_CPU_* definitions to the form (1ull << x). Humans are better at incrementing than shifting. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10045/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: cpu: Alter MIPS_CPU_* definitions to fill gapJames Hogan
The MIPS_CPU_* definitions accidentally missed bits 27..30 when MIPS_CPU_EVA was added, and further definitions have continued from there. Shift all the definitions since MIPS_CPU_EVA right by 4 so there are no gaps. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10044/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Add early CPU initialization codeFlorian Fainelli
Port the stblinux-3.3 code to perform a bunch of CPU-specific initialization, make it compatible with run-time detection of the CPU, and unroll the brcmstb-specific macros: BDEV_RB(), BDEV_UNSET. The "pref 30" disabling is done as a quirk. This is a preliminary change to allow the use of the "rotr" instruction gated by cpu_has_rixi. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: john@phrozen.org Cc: cernekee@gmail.com Cc: jon.fraser@broadcom.com Cc: pgynther@google.com Cc: paul.burton@imgtec.com Cc: ddaney.cavm@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12504/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: math-emu: dsemul: Remove an unused bit in ADDIUPC emulationMaciej W. Rozycki
Avoid a reader's confusion, as the calculation is correct either way. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12283/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13BUS: brcmstb_gisb: Hook to MIPS board_be_handlerFlorian Fainelli
MIPS kernels allow platforms to invoke a custom Bus Error handler, add the necessary code to do this for Broadcom SoCs where the GISB bus error handler can be used. We may get a bus error from an address decoded outside of the GISB bus space, so we need to check the validity of such a capture before printing anything. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: cernekee@gmail.com Cc: arnd@arndb.de Cc: jaedon.shin@gmail.com Cc: pgynther@google.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12284/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Octeon: Add Octeon III CN7xxx interface detectionZubair Lutfullah Kakakhel
Add basic CN7XXX interface detection. This allows the kernel to boot with ethernet working as it initializes the ethernet ports with SGMII instead of defaulting to RGMII routines. Tested on the utm8 from Rhino Labs with a CN7130. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Acked-by: David Daney <david.daney@cavium.com> Cc: janne.huttunen@nokia.com Cc: aaro.koskinen@nokia.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12376/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Make flush_threadRalf Baechle
Avoids function calls to an empty function. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Support R_MIPS_PC{16,21,26} rel-style relocsPaul Burton
MIPS32 code uses rel-style relocs, and MIPS32r6 modules may include R_MIPS_PC16, R_MIPS_PC21 & R_MIPS_PC26 relocations. We thus need to support these relocations in order to load MIPS32r6 kernel modules. This patch adds such support, which is similar to the rela-style support in module-rela.c but making use of the implicit addend from the instruction encoding. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Steven J. Hill <sjhill@realitydiluted.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12435/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Support R_MIPS_PC{21,26} rela-style relocsPaul Burton
MIPS64 code uses rela-style relocs, and MIPS64r6 modules may include the new R_MIPS_PC21 & R_MIPS_PC26 relocations. We thus need to support these relocations in order to load MIPS64r6 kernel modules. They are similar to the existing R_MIPS_PC16 relocation but applying to a wider field. Implement support for them by genericising the existing R_MIPS_PC16 implementation such that it can be used for different field widths, and calling it for all 3 reloc types. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Kees Cook <keescook@chromium.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Steven J. Hill <sjhill@realitydiluted.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12434/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: module: Make consistent use of pr_*()Steven J. Hill
The module relocation handling code has inconsistent use of printk() and pr_*() functions. Convert printk() calls to use pr_err() and pr_warn(). [paul.burton@imgtec.com: Do the same thing in module.c] Signed-off-by: Steven J. Hill <sjhill@realitydiluted.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12433/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Probe the M6250 CPUPaul Burton
Support probing the M6250 CPU now that cases for handling it have been added where required in the core MIPS kernel code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12375/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add M6250 cases to CPU switch statementsPaul Burton
Add casses supporting the M6250 CPU to various switch statements in the core MIPS kernel code that define behaviour dependent upon the CPU. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Maciej W. Rozycki <macro@codesourcery.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12374/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add M6250 PRID & cpu_type_enum valuesPaul Burton
Define the processor ID for the M6250 CPU and add a value to the enum cpu_type_enum for the core. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12373/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Probe the P6600 corePaul Burton
Support probing the P6600 core now that cases for handling it have been added throughout the core MIPS kernel code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12344/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add P6600 cases to CPU switch statementsPaul Burton
Add cases supporting the P6600 CPU to various switch statements in core MIPS kernel code that define behaviour dependent upon the CPU. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Petri Gynther <pgynther@google.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12343/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add P6600 PRID & cpu_type_enum valuesPaul Burton
Define the processor ID for the P6600 core and add a value to the enum cpu_type_enum for the core. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12342/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: <asm/cpu.h>: Reformat to 80 columns.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: SEAD3 can support MIPS32r6 CPUsPaul Burton
There are CPUs/bitfiles available for use with SEAD3 boards which implement release 6 of the MIPS architecture. Allow building the kernel for such a system. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12372/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Stop printing EJTAG exceptions to UARTPaul Burton
When CONFIG_MIPS_CPS_NS16550 is enabled, some register state is dumped to the UART when an exception is taken via the BEV on secondary cores. EJTAG exceptions are architecturally expected to be handled by the BEV even when Status.BEV is 0. This effectively means that if userland executes an sdbbp instruction on a secondary core then the kernel dumps register state to the UART even though the exception is perfectly normal & expected. Prevent this by simply not dumping information to the UART for EJTAG exceptions. Fixes: 609cf6f2291a ("MIPS: CPS: Early debug using an ns16550-compatible UART") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12341/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Add nothreads kernel parameterPaul Burton
When debugging a new system or core it can be useful to disable the use of multithreading. Introduce a "nothreads" kernel command line parameter that can be set in order to do so. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12340/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Support MIPSr6 Virtual ProcessorsPaul Burton
Introduce support for bringing up Virtual Processors in MIPSr6 systems as CPUs, much like their VPE parallel from the now-deprecated MT ASE. The existing mips_cps_boot_vpes function fits the MIPSr6 architecture pretty well - it can now simply write the mask of running VPs to the VC_RUN register, rather than looping through each & starting or stopping as appropriate as is done for VPEs from the MT ASE. Thus the VP support is in general an extension & simplification of the existing MT ASE VPE (aka SMVP) support. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12339/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Skip core setup if coherentPaul Burton
In preparation for supporting MIPSr6 multithreading (ie. VPs) which will begin execution from the core reset vector, skip core level setup if the core is already coherent. This is never the case when a core is first started, since boot_core explicitly clears the cores GCR_Cx_COH_EN register, and always the case when secondary VPs start since the first VP to start will have enabled coherence after initialising the core & its caches. One notable side effect of this patch is that eva_init gets called slightly earlier, prior to mips_cps_core_init rather than after it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Pull boot config retrieval out of mips_cps_boot_vpesPaul Burton
The mips_cps_boot_vpes function previously included code to retrieve pointers to the core & VPE boot configuration structs. These structures were used both by mips_cps_boot_vpes and by its mips_cps_core_entry callsite. In preparation for skipping the call to mips_cps_boot_vpes on some invocations of mips_cps_core_entry, pull the calculation of those pointers out into a separate function such that it can continue to be shared. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Pull cache init into a functionPaul Burton
In preparation for further modifications to mips_cps_core_entry, pull the L1 cache initialisation out into a separate function. This both makes the code in mips_cps_core_entry read more clearly, particularly when modifying it, and shortens it which will become important as code is added that needs to continue to fit within the reset vector. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12336/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Ensure our VP ident calculation is correctPaul Burton
When bringing up a CPU, ensure that its local ID as provided by the GIC matches up with our calculation of it. This is vital, since if the condition doesn't hold then we won't have configured interrupts correctly for the VP. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12335/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13irqchip: mips-gic: Provide VP ID accessorPaul Burton
Provide a gic_read_local_vp_id() function to read the VCNUM field of the GICs local VP_IDENT register. This will be used by a further patch to check that the value reported by the GIC matches up with the kernels calculation. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12334/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13irqchip: mips-gic: Use HW IDs for VPE_OTHER_ADDRPaul Burton
The Linux CPU number doesn't necessarily match up with the ID used for a VP by hardware. Convert the CPU number to the HW ID using mips_cm_vp_id when writing to the VP(E)_OTHER_ADDR register in order to ensure that we correctly access registers for the VPs of secondary cores. This most notably affects systems using CM3, such as those based around I6400. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12333/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: CM: Fix mips_cm_max_vp_width for UP kernelsPaul Burton
Fix mips_cm_max_vp_width for UP kernels where it previously referenced smp_num_siblings, which is not declared for UP kernels. This led to build errors such as the following: drivers/built-in.o: In function `$L446': irq-mips-gic.c:(.text+0x1994): undefined reference to `smp_num_siblings' drivers/built-in.o:irq-mips-gic.c:(.text+0x199c): more undefined references to `smp_num_siblings' follow On UP kernels simply return 1, leaving the reference to smp_num_siblings in place only for SMP kernels. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12332/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: CM: Add CM GCR_BEV_BASE accessorsPaul Burton
Generate accessor functions for the GCR_BEV_BASE register introduced by CM3, for use by a later patch. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12331/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: CPC: Add start, stop and running CM3 CPC registersMarkos Chandras
Add the new CM3 registers for controlling bringing up and powering down VPs on MIPSR6 cores. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12330/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: pm-cps: Avoid offset overflow on MIPSr6Markos Chandras
This is similar to commit 934c79231c1b ("MIPS: asm: r4kcache: Add MIPS R6 cache unroll functions"). The CACHE instruction has been redefined for MIPSr6 and it reduced its offset field to 8 bits. This leads to micro-assembler field overflow warnings when booting SMP MIPSr6 cores like the following one: Call Trace: [<ffffffff8010af88>] show_stack+0x68/0x88 [<ffffffff8056ddf0>] dump_stack+0x68/0x88 [<ffffffff801305bc>] warn_slowpath_common+0x8c/0xc8 [<ffffffff80130630>] warn_slowpath_fmt+0x38/0x48 [<ffffffff80125814>] build_insn+0x514/0x5c0 [<ffffffff806ee134>] cps_gen_cache_routine.isra.3+0xe0/0x1b8 [<ffffffff806ee570>] cps_pm_init+0x364/0x9ec [<ffffffff80100538>] do_one_initcall+0x90/0x1a8 [<ffffffff806e8c14>] kernel_init_freeable+0x160/0x21c [<ffffffff8056b6a0>] kernel_init+0x10/0xf8 [<ffffffff801059f8>] ret_from_kernel_thread+0x14/0x1c We fix this by incrementing the base register on every loop. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12329/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: traps: Make sure secondary cores have a sane ebase registerMarkos Chandras
We shouldn't trust that the secondary cores will have a sane ebase register (either from the bootloader or during the hardware design phase) so use the ebase address as calculated by the boot CPU. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Petri Gynther <pgynther@google.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12328/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Detect MIPSr6 Virtual Processor supportPaul Burton
MIPSr6 introduces support for "Virtual Processors", which are conceptually similar to VPEs from the now-deprecated MT ASE. Detect whether the system supports VPs using the VP bit in Config5, adding cpu_has_vp for use by later patches. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Steven J. Hill <sjhill@realitydiluted.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12327/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: add initial support for DPT-ModuleAntony Pavlov
The following features are supported: * UART; * SPI-flash; * USB host; * GPIO key and LED. Links: * https://dptechnics.com/shop/index.php?route=product/product&path=59&product_id=50 * https://dptechnics.com/shop/index.php?route=product/product&path=59&product_id=63 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Daan Pape <daan@dptechnics.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12886/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13devicetree: add DPTechnics vendor idAntony Pavlov
Please see https://www.dptechnics.com/contact for details. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Daan Pape <daan@dptechnics.com> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12885/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: add initial support for Onion OmegaAntony Pavlov
The following features are supported: * UART; * SPI-flash; * USB host; * GPIO key and LED. Please see https://onion.io/omega for details. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: L. D. Pinney <ldpinney@gmail.com> Cc: Boken Lin <bl@onion.io> Cc: Jacky Huang <huangfangcheng@163.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12884/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13devicetree: add Onion Corporation vendor idAntony Pavlov
Please see https://onion.io/contact for details. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12883/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: add initial support for Dragino MS14 (Dragino 2)Antony Pavlov
The following features are supported: * UART; * SPI-flash; * USB host; * GPIO keys and LEDs. Links: * http://www.dragino.com/products/mother-board/item/71-ms14-p.html * https://wiki.openwrt.org/toh/dragino/ms14 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12882/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13devicetree: add Dragino vendor idAntony Pavlov
Please see http://www.dragino.com/about/about.html for details. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12881/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 17:34:04 +0000